MOTORCYCLE PARTS

The Jetson - PRESENTED HERE IN POLISHED BRASS Finish 

This is our latest creation, the JETSON our Dished Low-profile Gas Cap for your pride and joy 

The JETSON is actually works as both a VENTED and NON-VENTED Gas Cap as it can be assembled with the Vents open or closed, which means besides working on any modern Triumph Twin its also works on custom choppers, Harley Tanks as well as the BMW R18

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for grip

FITS ALL YEARS BONNEVILLE THRUXTON, AMERICA, T100, SPEEDMASTER, SE, SCRAMBLER, BOBBER, STREET TWIN, STREET CUP, STREET SCRAMBLER, T120 : 2001 to TODAY

TRIUMPHS WITH STOCK FAUX-MONZAS (SPEED TWIN 1200/SCRAMBLER 1200/THRUXTON 1200) we would recommend the BIllet Gas Cap NXS006 and the Adapter Ring instead rather than this one

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018,SPORTSTER, 48, IRON ETC

MC PART ID:MMU655

MC PART ID: ADT004

MC PART ID: ADT005

Windshield with GPS support for Triumph Bonneville T120

Complete with supports and screws, it perfectly fits the style and lines of the front. Made of 4mm thick PMMA (Acrylic).

It mounts very easily and offers excellent aerodynamic protection. The front louver eliminates turbulence, and the support tube doubles as a GPS mount.

Code: 3149DS

MC Part ID: GSS006

Set of Custom Rubber Grips for your Triumph Bike include the full throttle assembly so they are plug and play 

Throttle Inner Machined out of Billet 6061 T6 Aluminium

Outer Rubber Grips with custom molded Union Jack pattern 

SOLD AS A PAIR 

This version is suitable for the 22mm Bar Triumphs so that means all of these from 2016 to today : 

Street Twin / Speed Twin 900 / Speed Twin 1200 / Street Triple / Speed Triple / Thruxton 1200 / Street Scrambler / Scramber 900

MC Part ID: GRP001

Set of Custom Rubber Grips for your Triumph Bike include the full throttle assembly so they are plug and play 

Throttle Inner Machined out of Billet 6061 T6 Aluminium

Outer Rubber Grips with custom molded Union Jack pattern 

SOLD AS A PAIR 

This version is suitable for the Inch Bar Triumphs so that means and of these from 2016 to today : 

T100 / T120 / BOBBER / SPEEDMASTER 1200 

MC Part ID: GRP002

Pair of engine protection bars for BMW R12 G/S or BMW R12 NINET (Right + Left)

If you want to better protect your boxer, this is the bar you need. With double side protection tube it is very protective in the event of a fall and integrates perfectly with the frame of the BMW R12 G/S. Made of steel with 25 mm thick 2 mm tube treated with high resistance powder paints. Most maintenance work can be done without disassembling the bar. Very beautiful and elegant, they perfectly define the lines of the bike. Everything you need is provided, including assembly instructions.

NB: Compatible with aftermarket or OEM protections and cylinder head covers.

Model compatibility: BMW R12 G/S / R12 NINET

To offer you the best we are constantly improving our products in detail. The images may refer to a previous version.

 Code: 4305_BL

Supplied here with cap in BRUSHED finish

Kit Suitable for

• Triumph Twins 2001-2015 (T100, Thruxton, SE, Scrambler)
• Triumph Twins 2016-Present (Bobber, T100, T120, Street Cup, Street Twin etc)
• Harley Davidson 1983 and Up (Sportster, Dyna, etc)
• Moto Guzzi V7
• Royal Enfield Classic (with screw top type filler bung)

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THESE BIKES (IN BLACK OR POLISH)

Monza cap built by Motone using modern HIGH PRESSURE DIE CAST technology 

Triumph/HD Fuel tank adapter kit CNC formed out of billet aviation grade aluminium 

INSTRUCTIONS HERE

MC PART ID: NMX003+NMX013

Passenger grip BMW R12 G/S
To refine the end of the seat, we designed a very minimal passenger handle. It provides an excellent handhold for the passenger, aids in securing luggage at the rear of the seat when travelling alone, and is effective for moving or supporting the bike in emergency off-road situations.
Made of highly resistant powder-coated stainless steel, it is very easy to assemble with the kit supplied.
If you don't want to lose your girlfriend... you need this accessory!

NB: the two small original brackets for attaching additional bands mounted under the rear mudguard must be removed, the handle is used for the same purpose.

It is compatible with all our bag frames.

Model Compatibility: R12 G/S

 Code: 5004

Engine protection plate in anodized aluminum, protects the engine and the exhaust manifolds in off-road use.

Made of 3 mm Peraluman light alloy, it is cold formed and embossed with drain holes. Pronounced ribs for extra strength are combined with simplified mounting brackets for a strong and easy setup. It is larger than the original model and is shaped to protect the exhaust manifolds in the front and in the most exposed area of the catalytic converter. It is supplied with screws, anti-vibration rubbers and spacers and is ready for assembly.

Model compatibility: BMW R12 NineT / R12 / R12 G/S

 Code: 1407BL+A21

Reinforced stainless steel luggage rack designed for top box plate fixing
If you want to travel with your BMW R12 G/S with a hard top case or with significant luggage, this rear rack is the one for you! It completes the rear part and is equipped with comfortable handles for the passenger. Sturdy and practical, it can house both the code plate: U108 and the code plate: AL3 for the aluminum top case using the 4 provided fixings. Available with a high-resistance matt black epoxy powder finish. Also excellent for having more loading surface with soft bags.

Compatible with all BMW R12 G/S models.

It is compatible with our side pannier frames with the plate and related Atlas Top case code: AL3.

Maximum capacity 10 kg.

Luggage rack also compatible with all models of soft bags.

Material Stainless steel thickness 2 mm

If you want to use an original BMW aluminium top case on our luggage rack you will need: code 5003 + AL18 + A22

 Code:  5003+U108_BL

Pair of Rally footrests for BMW R12 G/S models

If you want to go on an adventurous trip or simply want to have a more secure footrest these footrests are just what you need.
Pair of CNC solid machined footpegs with stainless steel inserts. They greatly improve the boot support when off-road riding, especially when standing, and these footrests can also be adjusted as they can rotate 30 degrees, giving every rider excellent ergonomics.

Compatibility: BMW R12 G/S

Code: 4036

MC PART ID: MTE088+MTE070

Formed out of 300 Series Stainless Steel and designed to fit on your 2016 and up Triumph Twin

This is the Skirmish! Our handly little Mini Rack/Passenger Grab Rail/In Garage Parking assistant - We made this so if you want to pop out for a quick trip to the shop to grab a 6 pack/coincidentally taking cover from your family well now you have a slightly better excuse - unlike all the other racks we have seen out there we also included a couple of handy latch tie downs position points  

The Rail is also useful for parking the bike in confined space as well as for any passenger.

• Street Twin / Speed Twin 900 
• Street Scrambler / Scrambler 900
• Street Cup
• T100
• T120

***NEWLY UPDATED - THIS IS V2.0 OF THE SKIRMISH RACK WHICH FITS MOST KNOWN SEATS***

✅DOES FIT ALL OE STREET TWIN, SPEED TWIN 900, STREET SCRAMBLER, SCRAMBLER 900 SEATS

✅DOES FIT ALL MOTONE AND ALL KNOWN AFTERMARKET SEATS

✅DOES FIT OEM T100/T120 TRIUMPH QUILTED & RIBBED BENCH SEAT

✅ DOES  FIT OEM T100/T120 OE "COMFORT" SEAT

If you have a pre 2016 bike we will have a version out for your bike at some point, please don't buy this on the off chance it will fit - the bolt holes are in different positions.  

Unfortunately the Speed Twin 1200 has a different subframe so won't fit.

MC PART ID: MCB025

Supplied here with cap in BLACK

Kit Suitable for

• Triumph Twins 2001-2015 (T100, Thruxton, SE, Scrambler)
• Triumph Twins 2016-Present (Bobber, T100, T120, Street Cup, Street Twin etc)
• Harley Davidson 1983 and Up (Sportster, Dyna, etc)
• Moto Guzzi V7
• Royal Enfield Classic (with screw top type filler bung)

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THESE BIKES (IN BLACK OR POLISH)

Monza cap built by Motone using modern HIGH PRESSURE DIE CAST technology 

Triumph/HD Fuel tank adapter kit CNC formed out of billet aviation grade aluminium 

INSTRUCTIONS HERE

MC PART ID: NMX003+NMX014

Drawn out of sheet 5052 Aluminium and then GLOSS BLACK finished.

So far known to fit - T100,  T120 all years , Thruxton 900, Thruxton 1200, Speed Twin 1200 19-20, Royal Enfield Interceptor, Speed 400, Scrambler 400X, Scrambler 1200 X / XE / XC

Note: Does NOT fit street twin / speed twin 900 / Speed Twin 1200 21+

Different version coming for Speed Twin and Street Twin

MC PART ID: MTE187

Supplied here with cap in our signature Krackle Black

Kit Suitable for

• Triumph Twins 2001-2015 (T100, Thruxton, SE, Scrambler)
• Triumph Twins 2016-Present (Bobber, T100, T120, Street Cup, Street Twin etc)
• Harley Davidson 1983 and Up (Sportster, Dyna, etc)
• Moto Guzzi V7
• Royal Enfield Classic (with screw top type filler bung)

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THESE BIKES (IN BLACK OR POLISH)

Monza cap built by Motone using modern HIGH PRESSURE DIE CAST technology 

Triumph/HD Fuel tank adapter kit CNC formed out of billet aviation grade aluminium 

INSTRUCTIONS HERE

MC PART ID: NMX018+NMX003

MC PART ID: MMU504

Full SMD-LED circuit board.

Works as Running Light, Brake Light and Number plate illumination through window on underside.

Diecast Aluminium with a Black Finish 

Designed to look good on all kinds of cafe racers, hot rods, bobbers etc.

Fully E-Marked for Homologation.

Wired as follows :

Yellow = RUNNING light

Red = STOP light

Black = Earth

MC PART ID: MEL004

Leather cover to replace the original one (rubber interior not included)

Code: 2713

This is our latest creation, the TELSTAR Low-profile Gas Cap

The TELSTAR actually works as both a VENTED and NON-VENTED Gas Cap as it can be assembled with the Vents open or closed, which means besides working on any modern Triumph Twin its also works on custom choppers, Harley Tanks as well as the BMW R18

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for grip

FITS ALL YEARS BONNEVILLE THRUXTON, AMERICA, T100, SPEEDMASTER, SE, SCRAMBLER, BOBBER, STREET TWIN, STREET CUP, STREET SCRAMBLER, T120 : 2001 to TODAY

TRIUMPHS WITH STOCK FAUX-MONZAS (SPEED TWIN 1200/SCRAMBLER 1200/THRUXTON 1200) we would recommend the Billet Gas Cap NXS006 and the Adapter Ring instead rather than this one

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018,SPORTSTER, 48, IRON ETC

MC PART ID: MMU656

The Craig Bars - Named after Craig, because if he had a set of these fitted to his bike when he dropped it he wouldnt written if off.

Dont be a Craig : We have designed these to be the best bars on the market - with the 2 interconnecting cross bars, plus the highly buttressed welding on the mounting brackets these are proper hardcore compared to some of the more "dresser" bars you might see on the market . Built to Survive.  

25MM O/D SS TUBING

BLACK VERSION

v2 fits the following models:

• Bobber
• T120 T100 Lc
• Speed Twin 900
• Speed Twin 1200
• Thruxton 1200
• Street Twin 

MC Part ID: MCB018

These clamps precision machined out of billet aluminum and sold as a pair allow you to mount your M8 Indicator or Rear Lights to any 16mm frame tube or strut 

In this case 16mm is the same diameter as used on the stock Triumph Bobber Fender Struts 

MC Part ID: PXN016

Part of our new series of rear Light Clamps

These clamps work an any 13mm diameter rail or Strut - such as found on our Triumph Bobber RIALTO Rear mudguard guard 

MC Part ID: PXN013

This is our latest creation, the TELSTAR Low-profile Gas Cap

The TELSTAR actually works as both a VENTED and NON-VENTED Gas Cap as it can be assembled with the Vents open or closed, which means besides working on any modern Triumph Twin its also works on custom choppers, Harley Tanks as well as the BMW R18

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for grip

FITS ALL YEARS BONNEVILLE THRUXTON, AMERICA, T100, SPEEDMASTER, SE, SCRAMBLER, BOBBER, STREET TWIN, STREET CUP, STREET SCRAMBLER, T120 : 2001 to TODAY

TRIUMPHS WITH STOCK FAUX-MONZAS (SPEED TWIN 1200/SCRAMBLER 1200/THRUXTON 1200) we would recommend the Billet Gas Cap NXS006 and the Adapter Ring instead rather than this one

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018,SPORTSTER, 48, IRON ETC

MC PART ID: MMU658

This is our latest creation, the TELSTAR Low-profile Gas Cap

The TELSTAR actually works as both a VENTED and NON-VENTED Gas Cap as it can be assembled with the Vents open or closed, which means besides working on any modern Triumph Twin its also works on custom choppers, Harley Tanks as well as the BMW R18

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for grip

FITS ALL YEARS BONNEVILLE THRUXTON, AMERICA, T100, SPEEDMASTER, SE, SCRAMBLER, BOBBER, STREET TWIN, STREET CUP, STREET SCRAMBLER, T120 : 2001 to TODAY

TRIUMPHS WITH STOCK FAUX-MONZAS (SPEED TWIN 1200/SCRAMBLER 1200/THRUXTON 1200) we would recommend the Billet Gas Cap NXS006 and the Adapter Ring instead rather than this one

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018,SPORTSTER, 48, IRON ETC

MC PART ID: MMU657

The mo.unit basic is a high-quality and reliable control unit for motorcycles that is characterized by its versatile functions. Unlike the mo.unit blue, the mo.unit basic does not have Bluetooth functionality, making it an ideal choice for riders who want to do without wireless connectivity.

• Dimensions 90 x 53 x 30mm (L/W/H)
• Waterproof, vibration-resistant - IP69
• Weight approx. 180 g
• Fastening 2 x M5 screw, distance 74mm
• Operating voltage 9V - 15V
• Operating temperature -20° to +80°C
  

Inputs

• Ignition lock +12V or mo.lock
• Turn signal left
• Blinker right
• Light
• Starter
• Horn
• Brake light
• Kill
• Side stand
• LIN bus
• AUX1
• AUX2
  

Outputs

• Turn signal left
• Blinker right
• Low beam
• High beam
• Starter
• Horn
• Brake light
• Ignition
• AUX1 (Universal)
• AUX2 (Universal)

MC PART ID: MMU533

CNC Cut from billet aviation 6061-T6 aluminum - fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars.

Some models it will fit include Bonneville, T100, America, T120, Speedmaster, Thruxton.

MC PART ID: SNG217

CNC Cut from billet aviation 6061-T6 aluminum - fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars.

Some models it will fit include Bonneville, T100, America, T120, Speedmaster, Thruxton.

MC PART ID: SNG216

CNC Cut from billet aviation 6061-T6 aluminum - fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars.

Some models it will fit include Bonneville, T100, America, T120, Speedmaster, Thruxton.

MC PART ID: SNG220

CNC Cut from billet aviation 6061-T6 aluminum - fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars.

Some models it will fit include Bonneville, T100, America, T120, Speedmaster, Thruxton.

MC PART ID: SNG206

MC PART ID: SHN002

MIRROR POLISHED VERSION

These slip-ons are suitable for all the 2001-2015 Spoked Wheel Bonneville 

Sold as Pair - Suitable for Stock Headers (EFI or Carb) or Motone Headers (Coming soon) 

Rolled 300 Series Cones and 6061 Billet Aluminium End Caps combined with a perforated core to make your exhaust note sing 

Slip-ons include inline dB Killers which you can either leave in or remove to modulate the cans to your preferred tone and volume

We recommend putting the bolt back into the exit tube even after removing the dB killers to ensure smooth airflow

MC Part ID: MTE207

MC PART ID: MMU508

Gort!

Full SMD-LED circuit board.

Works as Running Light, Brake Light and Number plate illumination through window on underside.

Diecast Aluminium with a Gloss Black Finish 

Fully E-Marked for Homologation.

Wired as follows :

Yellow = RUNNING light

Red = STOP light

Black = Earth

MC PART ID: MEL525

This is the latest version of our popular helmet lock kit - with a specific cast bracket to fit on your TRIUMPH BOBBER (or late model Speedmaster)

Fits all years Triumph Bobber 2017-2026+

Designed to fit on the stock airbox lugs - the kit works both on a completely stock bike or in conjunction with AJAX rear light/signal brackets which also use the same mounting point. 

Can be fit at the same time as our pannier rails

Kit comes with 2 Keys 

MC PART ID: MMU667+MMU520

Ignition Relocation kit 

Known to fit

• Street Twin 900
• Speed Twin 900 Up to 2024
• T100 LC
• T120 

May fit more models we are testing soon and will update page

Kit consists of a forged aluminium bracket that fits on top of the Sprocket Cover which allows you to relocate your ignition unit down from the yoke 

It also includes a plug and play loom that replicates the plugs in the Ignition barrel to give you the flex to get it into the new position 

MC PART ID: MMU593+DDM015

MC PART ID: SHN003

Pair of Engine protection crash bars nineT (Left + Right)

These crash bars integrate seamlessly with the frame of the R nineT , and offer very good protection when the bike is dropped. 
Made in treated steel with high resistance powder coat.
Easy to install, it comes complete with distance bushings and screws.
The majority of the maintenance work can be performed without disassembly of the bars.

NB: it also fits with the original cylinder protectors.

Code: 1625

Designed to make a paddock stand use even easier.

• Lightweight anodised alloy
• Rotating bobbin
• Stainless steel bolts & bearings

Designed to make a paddock stand use even easier.

• Lightweight anodised alloy
• Rotating bobbin
• Stainless steel bolts & bearings