Jackets

1. MAIN JACKET, CE - CLASS AA CERTIFIED IN ACCORDANCE WITH DIRECTIVE PREN17092 

• Exterior in extremely tough and water repellent Oxford 600D CORDURA®
• Cow leather inserts on elbows, shoulders and wrists
• Lining in polyester mesh
• Edge and inside of neck in soft neoprene
• Breathable LP2 PRO protectors in D3O® CE-Level 2 on elbows and shoulders as standard (world preview)
• YKK zips
• Aero 3D mesh pocket for the VIPER PRO CE protection in D3O® on the back
• Double front ventilation openings with zip
• Rear ventilation panel that can be folded on the lumbar area
• Ventilation openings on the arms, with double slider zip on the forearm
• Ventilation flaps with zip at the bottom
• Adjustable on the biceps, forearm, wrist and waist
• Neck with micrometric adjustment and non-flap fastening
• Bottom left watertight outer cargo pocket
• Rear outer cargo pocket to house the standard rainproof jacket, with:
  • Elastic no-fall fastening system to make wearing the rain proofing easy
  • 100% waterproof inner membrane
  • Anti-condensation inner mesh
• Inner pocket on the chest
• Two inner cargo pockets
• Reflective prints
• Connection system to the P-ONE trousers (code T8162M)

2. ULTRALIGHT PADDED INNER JACKET, REMOVABLE AND CAN BE WORN SEPARATELY

• Outside in breathable polyamide with water repellent treatment
• Thermal padding in soft polyester padding (170 g)
• Different sized inner and outer pockets
• YKK zips
• Connection to the main jacket by zip

• HYDROSCUD®:
  • Breathable polyamide fabric, windproof and high water column waterproofing
  • Taped seams
• Anti-water trap on the central zip (neck included)
• YKK zips
• Taped neck
• RAIN TOWER TESTED - EN 14360:2004
• Reflective inserts
• Contrasting inserts on the arms, in yellow fluo fabric in accordance with the EN 20471:2013 standard
• Reflective logo on the arms and back
• Non-flap system on the biceps, wrist and waist
• Can be compacted into the rear pocket of the main jacket
• Waterproofing: 5.000 mm
• Breathability: 5.000 gr/m2/24h

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

It’s a daunting task when trying to improve upon the pinnacle motorcycle jacket of our adventure collection, but we made it happen. The Dominator 3 GTX motorcycle jacket has enhanced ventilation, waterproofing, and refinements to every element of the construction to upgrade performance and comfort for the rider. The fully waterproof motorcycle jacket features the tried and tested 3L GORE-TEX laminate with an updated, clean design. The detachable storm collar - which protects the neck of the rider against the elements - can be stored in the back pocket when not needed.

The stretch cuffs are also detachable and will block cold air trying to flow into the sleeves of the motorcycle jacket. In higher temperatures, airflow to the body is improved by redesigned VCS|Zippers at the upper and lower arms while our patented VCS|Aquadefence panels on the chest cool down the upper body. The 3L GORE-TEX Pro reinforced Armacor fabric is used on the shoulders for extra abrasion resistance and durability. Protection is solidified by our award-winning SEEFLEX CE-level 2 armor at the shoulders and elbows and the SEESOFT CE-level 2 back protector. The motorcycle jacket is prepared for our SEESOFT CE-level 1 divided chest protectors. The detachable kidney belt provides stability and protection to the lower back area.

Go ahead, travel anywhere, anytime with the Dominator GTX motorcycle jacket. Your next adventure awaits.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

It’s a daunting task when trying to improve upon the pinnacle motorcycle jacket of our adventure collection, but we made it happen. The Dominator 3 GTX motorcycle jacket has enhanced ventilation, waterproofing, and refinements to every element of the construction to upgrade performance and comfort for the rider. The fully waterproof motorcycle jacket features the tried and tested 3L GORE-TEX laminate with an updated, clean design. The detachable storm collar - which protects the neck of the rider against the elements - can be stored in the back pocket when not needed.

The stretch cuffs are also detachable and will block cold air trying to flow into the sleeves of the motorcycle jacket. In higher temperatures, airflow to the body is improved by redesigned VCS|Zippers at the upper and lower arms while our patented VCS|Aquadefence panels on the chest cool down the upper body. The 3L GORE-TEX Pro reinforced Armacor fabric is used on the shoulders for extra abrasion resistance and durability. Protection is solidified by our award-winning SEEFLEX CE-level 2 armor at the shoulders and elbows and the SEESOFT CE-level 2 back protector. The motorcycle jacket is prepared for our SEESOFT CE-level 1 divided chest protectors. The detachable kidney belt provides stability and protection to the lower back area.

Go ahead, travel anywhere, anytime with the Dominator GTX motorcycle jacket. Your next adventure awaits.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

All-season laminated GORE-TEX touring jacket with unique features

The Poseidon 2 GTX Jacket is lighter, more flexible, more versatile, easier to adjust and offers even more on-demand airflow, provided by our patented VCS|aquadefence (Ventilation Control System). On top of that, we’ve also added a removable GORE-TEX® storm collar to the jacket, for the times when it gets really rough and tough out there.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

PROTECTION FEATURES

ERGONOMIC FEATURES

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

The Defender 3 GTX is designed for those who dream of exploring uncharted horizons and don't stop until they’ve fulfilled that dream. No matter what weather types you might encounter while chasing that dream, the Defender Pro GTX will help keep you going thanks to the detachable waterproof liner with a 3L GORE-TEX membrane. This waterproof motorcycle jacket is also equipped with a removable thermal liner for rides in colder weather. If you are looking for a motorcycle jacket with ample ventilation features, look no further because this motorcycle jacket has plenty of options to regulate the amount of airflow to your body.

Next to the VCS|Ventilation panels on the front and the multiple zippers on the arm and back, the motorcycle jacket also comes with a main front zipper that can be zipped open to reveal a mesh ventilation panel that directs a cool flow of air onto your body. With all the ventilation panels and zippers open, a lot of air will flow through the entire motorcycle jacket keeping you cool during rides in high temperatures. No matter what road you take - if there even is a road - this motorcycle jacket will keep you safe thanks to the SEEFLEX CE-level 2 protectors (at the shoulders and elbows) combined with the highly abrasion-resistant outer shell that is partly constructed with the rugged ripstop material.

To increase the abrasion resistance on the high impact areas of the outer shell, we added a protective multi-layer print to the elbow area as an additional layer of protection. It also comes prepared for the SEESOFT CE-level 2 back protector and our SEESOFT CE-level 1 divided chest protectors. If you want to upgrade even further, you can connect our Segur neck brace to the connection points on the jacket. There is plenty of space to store your essential belongings in the two front pockets, big rear pocket and two inner pockets. We also added a left sleeve pocket for easy access to payment cards or toll tickets without taking your gloves off. The front pockets can be closed with zippers to make sure your valuable possessions will stay put and will arrive together with you at your destination.

With our fully loaded versatile, do-it-all Defender 3 GTX jacket you can fulfil your dreams and explore the uncharted in any weather that nature throws your way.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

The Defender 3 GTX is designed for those who dream of exploring uncharted horizons and don't stop until they’ve fulfilled that dream. No matter what weather types you might encounter while chasing that dream, the Defender Pro GTX will help keep you going thanks to the detachable waterproof liner with a 3L GORE-TEX membrane. This waterproof motorcycle jacket is also equipped with a removable thermal liner for rides in colder weather. If you are looking for a motorcycle jacket with ample ventilation features, look no further because this motorcycle jacket has plenty of options to regulate the amount of airflow to your body.

Next to the VCS|Ventilation panels on the front and the multiple zippers on the arm and back, the motorcycle jacket also comes with a main front zipper that can be zipped open to reveal a mesh ventilation panel that directs a cool flow of air onto your body. With all the ventilation panels and zippers open, a lot of air will flow through the entire motorcycle jacket keeping you cool during rides in high temperatures. No matter what road you take - if there even is a road - this motorcycle jacket will keep you safe thanks to the SEEFLEX CE-level 2 protectors (at the shoulders and elbows) combined with the highly abrasion-resistant outer shell that is partly constructed with the rugged ripstop material.

To increase the abrasion resistance on the high impact areas of the outer shell, we added a protective multi-layer print to the elbow area as an additional layer of protection. It also comes prepared for the SEESOFT CE-level 2 back protector and our SEESOFT CE-level 1 divided chest protectors. If you want to upgrade even further, you can connect our Segur neck brace to the connection points on the jacket. There is plenty of space to store your essential belongings in the two front pockets, big rear pocket and two inner pockets. We also added a left sleeve pocket for easy access to payment cards or toll tickets without taking your gloves off. The front pockets can be closed with zippers to make sure your valuable possessions will stay put and will arrive together with you at your destination.

With our fully loaded versatile, do-it-all Defender 3 GTX jacket you can fulfil your dreams and explore the uncharted in any weather that nature throws your way.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

The Toronto H2O motorcycle jacket is a technical, high-performance garment that enables you to blend into urban life seamlessly the moment you get off your motorcycle or scooter. You can wear this jacket over your everyday business attire and nobody will even notice you’re wearing protective motorcycle gear.

The Toronto H2O is made of a PWR|Shell 500D 2 and incorporates a hydratex|Mesh G-liner construction to make it waterproof. It also houses our proprietary, comfortable, lightweight, and ventilated SEESMART CE-level 1 armor at the elbows and shoulders. There’s also an insert to accommodate the additional SEESOFT CE-level 2 back protector in case you are looking for an upgrade.

You’ll find enough waterproof pockets to store everything you need on your daily commute, keeping those items important to you dry when the weather doesn’t want to cooperate. Furthermore, an adjustment zipper at the waist and tabs at the cuff make it possible to tailor the fit to your body. Laminated reflection on the back of the detachable hood is added for extra visibility. The full-sleeve detachable thermal liner will keep you warm during colder days but can be removed when it gets warmer outside. The thermal liner is also separately wearable and reversible – inside out, outside in.

Look great and stay dry with the Toronto H2O motorcycle jacket.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

The Montana H2O motorcycle jacket is the ideal garment for urban mobility and will help you challenge whatever life throws at you on your daily commute. See it on the streets and you’d never guess that the Montana H2O is road-ready motorcycle jacket.

Next to the longer archetypical parkas we already had in our range of commuter motorcycle jackets, we thought it was time to add a shorter one as well. The Montana H2O is made of a 2L PWR|Shell material and has an incorporated hydratex|Mesh G-liner construction to keep the water out.

To keep you safe, it comes complete with comfortable, lightweight, and ventilated SEESMART CE-level 1 armor at the elbows and shoulders. There’s also an insert to accommodate the additional SEESOFT CE-level 2 back protector in case you’re looking for an upgrade. You’ll find enough waterproof pockets to store everything you need on your daily commute when the weather doesn’t want to cooperate.

Adjustment cords and tabs make it possible to tailor the fit to your body, and you can use the jeans loops or the short connection zipper to attach it to your pair of riding motorcycle pants or jeans. Reflection on the back and at the detachable hood is added for extra visibility. With the detachable thermal liner inside, you wrap yourself in pure luxury and comfort on those colder spring, autumn, and winter morning rides. Without the liner, this motorcycle jacket is perfectly suited to keep you safe and comfortable from spring to early autumn.

Look great and stay dry with the Montana H2O motorcycle jacket. 

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Highly ventilated and rugged jacket for on and off-road adventure riding in high temperatures.

Meet the Cayenne 2 motorcycle jacket. It’s our purpose-built, top-spec, hot-weather adventure jacket for those driven to break all boundaries. This jacket has been constructed with the strongest mesh fabrics prominently located at the front and back and under the arms of the jacket. This allows for ample air to freely flow through the jacket and cool you down while riding in rising temperatures. The highest level of impact protection is provided by our CE-level 2 SEEFLEX shoulder and elbow protectors and SEESOFT AIR back protector.

This motorcycle jacket is prepared for our SEESOFT chest protectors as well. Additionally, it comes equipped with connection loops to connect our Segur neck brace to it. To keep the right fluids flowing through your body during your ride, we constructed a pocket for a hydration bag into the back of the jacket. To top it off, we added a detachable kidney belt with a secret pocket designed for change and a spare credit card. This jacket has been created for on and off-road travelers looking for an extremely rugged yet ventilated garment with top-level armor, plenty of storage, and ample adjustment possibilities.

If this is you, then look no further. You’ve found what you’re looking for.

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating. For more details about certification click here.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, waterproof, lightweight, comfortable, active fit off-road jacket

Meet the pinnacle product of REV'IT'S DIRT Series off-road collection: The Component Jacket. It’s the go-to, full-zippered jacket for the off-road rider that needs a CE-certified, lightweight, comfortable, active-fitting, and waterproof garment for all adventures on the trails. The hard shell construction is made from a flexible & waterproof stretch ripstop fabric, along with Cordura® ripstop at the shoulders & arms for increased abrasion resistance. REVIT's open-structured SEESMART™ CE-level 1 protectors found at the shoulders & elbows provide the rider’s necessary armor, plus you can add the REV'IT! Slingshot Back Protector. Alternatively, the CE-level 1 elbow and shoulder protectors can be easily removed if the rider wants to *upgrade their protection by wearing REVIT's body-hugging Proteus protector jacket (with CE-level 1 & 2 protectors) underneath. Ventilation zippers at the lower & upper arms keep riders cool while a detachable hood/storm collar keeps the rider dry off the bike and can be stored in the back pocket when taken off/not in use.

*Make sure the included SEESMART™ armor is removed before upgrading the protection otherwise the ideal fit won’t be achieved & discomfort may ensue.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, waterproof, lightweight, comfortable, active fit off-road jacket

Meet the pinnacle product of REV'IT'S DIRT Series off-road collection: The Component Jacket. It’s the go-to, full-zippered jacket for the off-road rider that needs a CE-certified, lightweight, comfortable, active-fitting, and waterproof garment for all adventures on the trails. The hard shell construction is made from a flexible & waterproof stretch ripstop fabric, along with Cordura® ripstop at the shoulders & arms for increased abrasion resistance. REVIT's open-structured SEESMART™ CE-level 1 protectors found at the shoulders & elbows provide the rider’s necessary armor, plus you can add the REV'IT! Slingshot Back Protector. Alternatively, the CE-level 1 elbow and shoulder protectors can be easily removed if the rider wants to *upgrade their protection by wearing REVIT's body-hugging Proteus protector jacket (with CE-level 1 & 2 protectors) underneath. Ventilation zippers at the lower & upper arms keep riders cool while a detachable hood/storm collar keeps the rider dry off the bike and can be stored in the back pocket when taken off/not in use.

*Make sure the included SEESMART™ armor is removed before upgrading the protection otherwise the ideal fit won’t be achieved & discomfort may ensue.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, waterproof, hooded, lightweight, active fit motorcycle smock

The CE-certified and waterproof Blackwater smock is a fresh face in the realm of off-roading and a member of the DIRT Series collection. With a design inspired by the outdoor world, it offers increased freedom of movement thanks to the functional active fit and the absence of a front zipper. The PWR|Shell stretch ripstop fabric outer shell, alongside the CORDURA® ripstop fabric at the lower arms, allows for a high level of abrasion resistance. REVIT's open-structured SEESMART™ CE-level 1 protectors found at the shoulders & elbows provide the rider’s necessary armor, plus you can add the REV'IT! Slingshot Back Protector. Alternatively, the CE-level 1 elbow and shoulder protectors can be easily removed if the rider wants to *upgrade their protection by wearing REVIT's body-hugging Proteus protector jacket (with CE-level 1 & 2 protectors) underneath.  Stay cool in the warm by opening the ventilation zippers at the upper arm & back. The hood will keep the rider dry when off the bike and can easily be stored in the back pocket when not in use.

*Make sure the included SEESMART™ armor is removed before upgrading the protection otherwise the ideal fit won’t be achieved & discomfort may ensue.

Adjustability

• Adjustment drawcord at hem
• Adjustment tab at cuffs

Pockets

• Waterproof slit pocket at waist

Features

• Adjustment drawcord at hood
• Detachable hood: The zip-on hood can be easily removed from the coat.
• Easy entrance zipper at side seam

Waterproofing

• Hydratex®|3L: A 3-layer construction; the hydratex®|3L membrane has a layer of protective tricot laminated on each side of the membrane. This results in a waterproof and breathable membrane that is also very durable.

Insulation: none

Ventilation

• Zippers on upper arms
• Zipper at upper back

Protection

• SEESMART™ CE-level 1 Elbow Protectors
• SEESMART™ CE-level 1 Shoulder Protectors

Outer shell material

• 3L CORDURA® 750D ripstop: A three-layer CORDURA® with ripstop properties.
• PWR|Shell ripstop stretch: Durability and great abrasion resistance are the defining characteristics of PWR|Shell, thanks to its special ripstop weaving. Thick reinforcement threads are interwoven at regular intervals into the fabric in a crosshatch pattern known as ripstop.

Visibility

• Laminated reflection on back: Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
• Laminated reflection on hood: Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
• Laminated reflective logo on back: This product has a reflective logo at the back of the hand to help riders who are on the road be seen in low light, inclement weather, and at night.

Certification

• This garment is certified according to the FprEN 17092 Standard, published in 2019 and has achieved A rating. For more details about certification click here.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

For many years, the Sand outfit has been the go-to choice for riders looking for a rugged and versatile jacket and pants combination that is fully prepared to take on any challenging adventure on or off-road. Hot, wet, or cold weather will not stop you from reaching your destination, wherever the road may lead you. This jacket will take you anywhere in style and total comfort. Meet the 4th generation of this iconic piece. Meet the Sand 4 H2O jacket. The tough yet lightweight, abrasion-resistant outer shell is engineered to last a multitude of around-the-world trips and is designed to provide excellent freedom of movement for the most demanding and technical riding situations.

For maximum impact protection, the Sand 4 H2O includes our award-winning, industry-leading SEEFLEX™ CE-level 2 protectors at the shoulders and elbows. It also comes prepared for the optional and equally impressive SEESOFT™ CE-level 2 insert back protector. You’re ready to tackle any challenge with this jacket. When we say the Sand 4 H2O jacket is versatile, we mean that it is prepared for any climate you might encounter, and that it allows you to configurate it in the best possible way to ensure maximum comfort. Every layer is removable and separately wearable, from the waterproof hydratex® membrane to the insulated winter lining. Changing seasons or weather conditions won’t deter you from getting on your bike, you’re ready for it all. Multiple adjustment straps and tabs on the arms, and variable height adjustment straps at the waist will ensure the perfect fit to your body with or without the liners installed.

If you are looking for airflow, this jacket has plenty of options that allow you to regulate the amount of wind that blows towards your body. It features 3 ventilation panels on the front, 4 ventilation zippers on the arms, and 2 exhaust vents zipper on the back. The 2 front pockets, big rear pocket, and 2 inner pockets provide ample storage space so you can bring all your essentials along for the ride and keep them close. The back pocket is even large enough to store the liners when not in use. All the outside pockets can be closed with zippers to make sure you won’t lose your valuable possessions during the ride. Durable, versatile, and practical.

The highest specifications regarding tear, cut and abrasion-resistance and top-notch impact armor. The Sand 4 H2O jacket has it all and is ready for your next ride around the world.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

Adjustability

• Adjustable elbow protection: The adjustable elbow protection pockets allow you to tailor the CE-rated elbow protection to three different heights to perfectly fit your body and for optimal comfort while riding.
• Adjustment drawcord at hem
• Adjustment strap at lower arm
• Adjustment tab at cuffs
• Adjustment tab at upper arm
• Flexisnap at collar: The REV’IT! flexisnap makes it possible to adjust the collar circumference easily and personalize its fit to each rider. A jacket is often worn in more then one season, and the flexisnap makes it possible to adjust the collar within seconds. During winter a wider collar circumference accommodates combining the jacket with a balaclava or wind collar, while during summer, a wider circumference lets an all-important cooling wind into the collar.
• Variable height adjustment straps at waist

Storage

• Inner pocket within thermal liner: The internal pocket within the thermal liner allows for additional storage and for riders to keep personal items close.
• Two inner pockets
• Two waterproof stash pockets at waist
• Waterproof inner pocket within waterproof liner: The internal pocket within the waterproof liner is waterproof.
• Waterproof stash pocket on back

Lining

• 3D mesh

Features

• Long connection zipper
• Prepared for REV’IT! Segur neck brace
• Prepared for vest connector NEON: The Vest connector NEON allows you to the upgrade your jacket with a vest that quickly and easily attaches. The highly visible vest offers enhanced safety.
• Separately wearable hydratex®|Lite liner
• Short connection zipper
• Short connection zipper in detachable waterproof liner: Adding to the versatility of the waterproof detachable liner, it comes with a short connection zipper, allowing you to securely fasten it to your riding trousers (or jeans via the Safeway 2 belts), when possible.
• Soft edge at collar: For extra comfort, the inside of the collar is covered with a soft fabric.
• Two-way Collar Snap Closure System

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

For many years, the Sand outfit has been the go-to choice for female riders looking for a rugged and versatile jacket and pants combination that is fully prepared to take on any challenging adventure on or off-road. Hot, wet, or cold weather will not stop you from reaching your destination, wherever the road may lead you. The Sand 4 H2O Ladies is the ultimate women’s adventure riding jacket. The tough yet lightweight, abrasion-resistant outer shell is engineered to last a multitude of around-the-world trips and is designed to provide excellent freedom of movement for the most demanding and technical riding situations. For maximum impact protection, the Sand 4 H2O Ladies includes our award-winning, industry-leading SEEFLEX™ CE-level 2 protectors at the shoulders and elbows. It also comes prepared for the optional and equally impressive SEESOFT™ CE-level 2 insert back protector. You’re ready to tackle any challenge with this jacket. When we say the Sand 4 H2O Ladies jacket is versatile, we mean that it is prepared for any climate you might encounter, and that it allows you to configurate it in the best possible way to ensure maximum comfort. Every layer is removable and separately wearable, from the waterproof hydratex® membrane to the insulated winter lining. Changing seasons or weather conditions won’t deter you from getting on your bike, you’re ready for it all. Multiple adjustment straps and tabs on the arms, and variable height adjustment straps at the waist will ensure the perfect fit to your body with or without the liners installed. If you are looking for airflow, this jacket has plenty of options that allow you to regulate the amount of wind that blows towards your body. The main front zipper can be zipped open to reveal a mesh ventilation panel that enables cool air to travel into the jacket. At the front, we have 2 ventilation panels which can be held open by a special tab connected to a press button on the outside of the jacket. With all 3 front ventilation panels open, in combination with the 2 rear-vent zippers, they will create an incredible amount of airflow through the entire jacket. Combined with the multiple ventilation zippers running across the arms, this jacket will keep you cool and comfortable in higher temperatures. The 2 front pockets, big rear pocket and 2 inner pockets provide ample storage space so you can bring all your essentials along for the ride, and keep them close. The back pocket is even large enough to store the liners when not in use. All the outside pockets can be closed with zippers to make sure you will not lose your valuable possessions during the ride. Durable, versatile and practical. The highest specifications regarding tear, cut and abrasion resistance and top-notch impact armor. The Sand 4 H2O Ladies jacket has it all and is ready for your next ride around the world.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Fashionable city jacket with high end features

Designed for year-round rides on two wheels

Stays dry and lightweight due to a laminated shell

On-demand airflow via VCS|aquadefence ventilation

When the development process started for the Trench GTX, our aim was to create a fashionable city jacket with all the functional and protective features you normally find only in high-end touring jackets. It would be a jacket designed for long-distance, metropolitan commuters that ride 365 days a year on two wheels, in any type of weather imaginable. Mission: Accomplished. 

The laminated GORE-TEX® outer shell is extremely breathable and, as you would expect, 100% waterproof. Being a laminated outer shell, the water pick-up is virtually non-existent, so the jacket stays dry and lightweight all the time. This plays a huge role in preventing hypothermia during winter or colder rides. When used without the included thermal liner, there’s an unsurpassed breathability making this jacket comfortable to wear in warmer conditions. Thus, you have here an almost four-season jacket, with the exception of extreme heat. 

Unparalleled, on-demand airflow is provided by our patented VCS|aquadefence ventilation system, conveniently positioned at the chest, yet nicely integrated into the design. Hot and humid air that could potentially get trapped inside the jacket can easily escape through the air outlet vents around back. In terms of protection, the Trench GTX jacket has got it all. SEEFLEX™ CE-level 2 armor is found at the elbows and shoulders, and it’s also prepared for the SEESOFT™ CE-level 2 back protector.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight and versatile adventure jacket for all climate conditions

Get ready to go off-road with the Offtrack

Lightweight and well ventilated jacket

Removable thermal and waterproof liner

Heavy-duty safety and style

When you’re not afraid of riding off-road, and you don’t know where the next adventure will lead you, you need gear that keeps you well protected and cool at the same time. That’s why we developed our new Offtrack jacket: a lightweight, well-ventilated garment with plenty of storage space. It's your ideal companion for challenging adventure trips on and off-road. When the temperature rises, the VCS ventilation panels on the front can be opened to optimize airflow to the upper body. If the temperature drops, the detachable thermal liner can be zipped back in for added warmth. When the weather turns for the worse, the detachable and waterproof hydratex®|G-liner will keep you dry. The water resistant pockets will also protect your belongings from the elements. Additionally, the Offtrack comes equipped with the highest SEEFLEX™ CE-level 2 protection at the shoulders and elbows. It’s further upgradable with a SEESOFT™ CE-level 2 back protector and/or CE-level 1 chest protector inserts.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

For female riders who don’t want to choose between a waterproof or a mesh jacket for their adventures, the Levante 2 H2O Ladies jacket is the silver-bullet solution. This versatile multi-season motorcycle jacket has all the features you need for your next journey in the spring, summer, or autumn. Waterproofing is provided by the easily removable hydratex|Lite
liner that can be stored in the back pocket when not in use, and can be worn underneath or on top of the outer shell.

With the liner removed, cool air can easily flow through the motorcycle jacket thanks to the big mesh panels on the front, back, and arms. Warm weather is no match for this jacket! Big storage pockets at the front and back will allow you to bring your essentials along for the ride without having to worry about where to put them. The Levante 2 H2O Ladies comes fully equipped with SEEFLEX CE-level 2 approved armor at the shoulders and elbows and is prepared for our SEESOFT back protector. The female-specific fit along with various adjustment tabs and straps ensure a perfect fit to your body.

Go ahead and take off on a new adventure, the versatile Levante 2 H2O Ladies motorcycle jacket will keep you comfortable and protected during journey.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada

Versatile waterproof multi-season mesh jacket for adventure riding in various weather conditions.

For those who don’t want to choose between a waterproof or a mesh motorcycle jacket for their adventures, the Levante 2 jacket is the silver-bullet solution. This versatile multi-season jacket has all the features you need for riding in the spring, summer, or fall. Waterproofing is provided by the easily removable hydratex|Lite liner that can be stored in the back pocket when not in use and can be worn underneath or on top of the outer shell. With the liner removed, cool air can easily flow through the jacket thanks to the big mesh panels on the front, back, and arms.

Warm weather is no match for this motorcycle jacket! Big storage pockets at the front and back will allow you to bring your essentials along for the ride. The Levante 2 H2O comes fully equipped with SEEFLEX CE-level 2 approved armor at the shoulders and elbows and is prepared for our SEESOFT back and chest protectors. Various adjustment tabs and straps will ensure a perfect fit to your body.

Go ahead and take off on a new adventure, the versatile Levante 2 H2O motorcycle jacket will keep you comfortable and protected during journey.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Keeps you riding in various seasons

hydratex®|Lite 2-in-1 detachable liner

Handy two-way collar snap closure system

CE-rated armor at shoulders and elbows

The versatile REV’IT! Tornado 3 jacket has all the features you need for your next tour in the spring, summer, or autumn: ventilation, waterproofing, and the highest level of protection. It’s then all wrapped up in a stylish package. On colder mornings or during bad weather, the breathable and flexible hydratex®|Lite 2-in-1 liner will keep the rider dry and comfortable. This detachable liner also works well as a separate jacket. When the temperature starts to rise, the liner can easily be removed to allow cool air to flow through the jacket. The 3D air mesh panels around the shoulders and the PWR|shell mesh on the front, back, and arms will keep the rider comfortable and feeling fresh. The jacket features our award-winning CE-level 2 SEEFLEX™ armor at the shoulder and elbows, and the Tornado 3 can further be fortified with our SEESOFT™ CE-level 1 divided chest protectors and SEESOFT™ CE-level 2 back protector. Various adjustment tabs and straps will ensure a perfect fit for the rider.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight, breathable protector underjacket/jersey jacket

REV'ITs lightweight & breathable Proteus protector jacket functions as an upgrade for the DIRT Series collection, which is worn under the jersey or various jackets we offer. Ideal stretch, ventilation, & armor allow you to ride protected on the trails less travelled. It’s constructed with a combination of densely woven Hicom mesh on the shoulders, a 2-way spandex mesh body, and PWR|Stretch mesh on the inner area of the sleeves. This combination provides optimal support, airflow, and flexibility. Furthermore, it features our award-winning SEEFLEX™ CE-level 2 protection at the shoulders and elbows. It is also equipped with a SEESOFT™ CE-level 2 back protector and SEESOFT™ CE-level 1 protectors at the chest. Thumb loops at the cuffs along with the stretch cuff will make sure the sleeves won’t slide when you’re putting it on or during riding.

Lining: 3D mesh
Features

• Integrated kidney belt
• Stretchable cuff
• Stretch at back
• Stretch at front
• Stretch at inside arms
• Thumb loops
• Outer shell material: Mesh/Stretch mesh

Protection

• 3D mesh protector pockets
• SEEFLEX™ CE-level 2 Elbow Protectors: Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX™ protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX™ protectors easily surpass the new norm without sacrificing wearer comfort.
• SEEFLEX™ CE-level 2 Shoulder Protectors: Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX™ protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX™ protectors easily surpass the new norm without sacrificing wearer comfort.
• SEESOFT™ at ribcage
• SEESOFT™ CE-level 1 Divided Chest Protectors
• SEESOFT™ CE-level 2 Back Protector: The SEESOFT™ CE-Level 2 back protector insert is designed to absorb variable impacts without compromising on comfort, ventilation or freedom of movement.

Certification

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved CU rating. For more details about certification click here.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

If safety wasn’t an issue, wouldn’t we rather all just hop on our bikes wearing our favorite pair of jeans, some sneakers, and a comfy sweater? But what if all of those things were possible AND you’d be protected. Maybe you’d think we’re dreaming. Or maybe we’d develop a sweater to complete the trifecta. Meet the double A rated (EN17092-3:2020 garment standard) Whitby sweater. Constructed using a new, in-house developed, stretchy, cut, tear and abrasion-resistant fabric that enables us to create casual fashion pieces that can perform at a level beyond what you would expect. With casual looks paired with incredible comfort and safety features, the Whitby is a 100% motorcycle-ready garment. It isn’t waterproof, but that’s not the point. This is about being able to wear something that looks like it was just picked casually from your wardrobe and that you’re going to wear all day long. Just because you can, and we know you will. The Whitby comes standard with the ultra-thin SEESMART™ armor so you won’t even notice it’s in there, nor will anyone else. This is Personal Protective Equipment, or PPE, in disguise. Add the SEESOFT™ CE-level 2 insert back protector for additional protection and you’re wrapped in an impact energy absorbing blanket, er sweater. Fellow riders will look twice and wonder what you’re wearing, and some might even question your sanity. But we know that you know better. This is not just a sweatshirt. This is wearable innovation. You’re good to go, anywhere, anytime.

Want to add a back protector to your sweater? Click here to determine which size you'll need and to add to your shopping cart.

Protection

• Double layer of PWR|Shield at elbows: PWR | shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance level. This product is equipped with a double layer of PWR | shield for extra safety.
• Double layer of PWR|Shield at shoulders: PWR | shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance level. This product is equipped with a double layer of PWR | shield for extra safety.
• Prepared for SEESOFT™ CE-level 2 Insert Back Protector: The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT™ CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
• SEESMART™ CE-level 1 Shoulder Protectors
• SEESMART™ CE-level 1 Elbow Protectors
• Thumb loops
• Outer shell material: CORDURA® knit, CORDURA® 750D ripstop

Visibility

• Laminated reflection at elbows: Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
• Laminated reflective logo at upper arm

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

If safety wasn’t an issue, wouldn’t we rather all just hop on our bikes wearing our favorite pair of jeans, some sneakers, and a comfy hoody? Well, we’ve got some news. It actually isn’t an issue any longer. Not only do we offer premium-quality and ultra-comfy riding denim and sneakers, we bring you the double A rated (EN17092-3:2020 garment standard) Cedar hoody. What’s truly unique is that we’ve been able to develop a full-stretch, cut, tear and abrasion-resistant fabric that enables us to create casual fashion pieces that can perform at a level beyond what you would expect. With casual looks paired with incredible comfort and safety features, the Cedar is a 100% motorcycle-ready garment. It isn’t waterproof, but that’s not the point. This is about being able to wear something that looks like it was just picked casually from your wardrobe and that you’re going to wear all day long. Just because you can. And we know you will. The Cedar comes standard with the ultra-thin SEESMART™ impact protectors so you won’t even notice it’s in there, nor will anyone else. This is Personal Protective Equipment, or PPE, in disguise. Add the SEESOFT™ CE-level 2 insert back protector for additional protection and you’re wrapped in an impact energy absorbing blanket, er hoody. Fellow riders will look twice at what you’re wearing, and some might even question your sanity. But we know that you know better. This is not just a hoody. You’re good to go, anywhere, anytime.

Want to add a back protector to your hoody? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to the USA.

A waterproof overshirt for three-season urban riding.

With our Bison 2 H2O, you can wear a motorcycle-ready overshirt that matches your style. Thanks to our renowned hydratex membrane, this garment keeps the water out when you find yourself in the rain. So you can keep riding regardless. And the inner pocket ensures any documents can be stored on the dry side of the waterproof membrane.

When it comes to safety, we reinforced the polyester canvas on the shoulders and elbows to create an extremely strong and abrasion-resistant product. Furthermore, by incorporating our ultra-thin limb protectors, we kept the silhouette tailored and sharp. You can even upgrade the protection component of the Bison 2 H2O with our insert back protector.

Additionally, with the short connection zipper, you can create a suit from head to toe by attaching it to your REV'IT! jeans using the Safeway belt and help to avoid your back being exposed. To make it a versatile as it is, and since we know it’s not always raining when you ride, we’ve installed an adjustable ventilation panel at the center back to allow the heat to escape on hot-weather days.

Ride in the rain, or when it’s warm out, with the Bison 2 H2O overshirt.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Casual workwear look and 100% motorcycle ready

Highly abrasion-resistant Cordura®

SEESMART™ CE-rated armour at shoulders & elbows

Multiple pockets for your convenience

The Worker sports the casual workwear look, but underneath, brings everything to the table to make it a 100% motorcycle ready overshirt. Multiple pockets mean convenience and that essentials can be kept close to the body. When the Worker is zipped and buttoned up for a summer ride, there’s also an option to let air flow through via the back ventilation opening. Thanks to the use of a highly abrasion-resistant Cordura® canvas and the use of SEESMART™ CE-level 1 armor at the shoulders and elbows, this overshirt means business when it comes to offering premium protection. Additionally, you have the option to optimize it by adding our SEESOFT™ CE-level 2 back protector insert and connecting the Worker to our jeans with the short connection zipper using the REV’IT! Safeway 2 belt.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to the USA.

A ventilated overshirt for hot summer rides in the concrete jungle.

The Tracer Air 2 combines all the functionality of a mesh jacket yet is engineered in the style of our popular overshirts. A full mesh outer shell allows for optimal airflow, helping to cool the body down on those hot day/summer rides. Extensive development has led this overshirt to look like streetwear fashion material.

But take a closer look and it reveals its open structure that allows air to reach the upper body. The Tracer Air 2 sports our ultra-thin and flexible protectors at the shoulders and elbows, and this overshirt can easily be upgraded with our back protector insert.

Offered in black, brown, and camo means the Tracer Air 2 facilitates the right style for everyone in need of that perfect summer product to throw on for a ride.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Our popular Tracer 2 shirt gets new features!

Outer shell made of 11oz. Cordura® denim

SEESMART™ CE-level 1 limb protectors

SEESOFT™ CE-level 2 back protector-ready

The Tracer 2 overshirt builds on the reputation of an industry first: the REV’IT! Tracer. The Tracer 2 adheres to the promise of providing a motorcycle-ready garment that does not compromise safety or style. The combination of 11oz. Cordura® denim and our slim SEESMART™ CE-level 1 protectors at the shoulders and elbows blend together through a tailored fit, fooling anyone into thinking the Tracer 2 is a casual piece of clothing. The Tracer 2 can then be connected to all REV’IT! jeans via the optional Safeway 2 belt, thanks to the short connection zipper. Adding to the casual style is the button-up front, which cleverly hides the full-front zipper. The two bottom buttons are hidden behind the outer fabric, preventing the tank from getting scratched when riding.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Hydratex® waterproof membrane keeps you dry

Handy hood to keep your head warm and dry

Multi-season use

Motorcycle and street-ready

The Stealth 2 hoodie has carved its niche out in the Urban segment as not only being a functional, good-looking, 100% motorcycle-ready garment, but one that looks great when walking around. It has always been geared toward versatility in adverse weather thanks to a waterproof hydratex® membrane that’s laminated to the outer shell. Now, it allows riders to stretch its use even more thanks to a detachable thermal liner. Once taken out, the thermal liner is separately wearable, creating an even more diverse package without harming its stealthy looks. SEESMART™ protectors remain standard at the elbows and shoulders, with the option to upgrade by installing our SEESOFT™ CE-level 2 back protector insert. With four closable pockets at the front, two more inside, a short connection zipper ready for our Safeway 2 belt and an easily adjustable hoody with a magnetic fix, the Stealth 2 comes well equipped for multiple season urban use.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.