MOTORCYCLE PARTS

MOTONE NAUTILUS EXHAUST SYSTEM - SPEED TWIN/THRUXTON 1200

$1,999.99

Motone Nautilus Exhaust System - Speed Twin/Thruxton 1200 up to 2025

Replaces complete exhaust system in your bike including the cat - a cross over pipe is integral to the design providing a H-Pipe type distribution of torque

Baffles are included in the main body of the pipes to modulate the sound to keep it below ear bleeding - still loud not insane

Pipes are built using a system of tig welded pie-cuts of 300 Series Stainless Steel

Bolt-On for all variants of the Speed Twin 1200 and Thruxton 1200, including:

Speed Twin 1200 Eur 4
Speed Twin 1200 Eur 5
Thruxton 1200
Thruxton R
Thruxton RS
Thruxton TFC

Note: If you're replacing your exhaust system, we also recommend replacing the copper exhaust gaskets at the same time. You can add the exhaust gaskets to your cart here.

MC PART ID: MTE195

MOTONE NAUTILUS EXHAUST SYSTEM - SPEED TWIN/THRUXTON 1200

MOTONE NAUTILUS EXHAUST SYSTEM - T100/T120 LC

$1,999.99

Motone Nautilus Exhaust System - Full Exhaust System for your Triumph Bonneville T100 or T120

Replaces complete exhaust system in your bike including the cat - a cross over pipe is integral to the design providing a H-Pipe type distribution of torque

Baffles are included in the main body of the pipes to modulate the sound to keep it below ear bleeding - still loud not insane

Pipes are built using a system of tig welded pie-cuts of 300 Series Stainless Steel

This system fits the T120/T100 Liquid Cooled Platform so thats any year T120 (from 2016 to 2026) including Eur 4, Eur 5, and Eur 5+ updates

And also the T100 LC so any T100 2017 to now

Notes:

If you're replacing your exhaust system, we also recommend replacing the copper exhaust gaskets at the same time. You can add the exhaust gaskets to your cart here.
Enhance the look of your new exhaust system with the Motone Finned Exhaust clamps. You can add these to your order by clicking here.

MC PART ID: MTE193

MOTONE NAUTILUS EXHAUST SYSTEM - T100/T120 LC

MOTONE COPPER EXHAUST RING GASKETS

$19.99

Suitable for use on all Liquid Cooled Triumph Bonneville 900 and 1200 cc Motors 2016 and up including:

Triumph Bonneville T100
Triumph Bonneville T120
Street Twin
Street Cup
Street Scrambler
Speed Twin
Bobber
Speedmaster
Scrambler 1200

MC PART ID: ENG303

MOTONE T120/T100 "JUPITER-2" EXHAUST TIP KIT - BLACK

$169.99

Exhaust Tips and Adapter Bracket kit for 2016 and up Triumph T100 and T120 Motorsickles : We call these the Jupiter-2.

Remove your stock mufflers and replace with these High Pressure Die Cast Tips - Finished in BLACK
- including Stainless steel adapter brackets and hardware

MC PART ID: MMU530

MOTONE T120/T100 "JUPITER-2" EXHAUST TIP KIT - BLACK

MOTONE FINNED EXHAUST CLAMPS - LC - BLACK/CONTRAST POLISHED FINS

$209.99

VERSION 2.0 - INVESTMENT CAST STAINLESS STEEL

Big Fin Exhaust Clamps for LC Triumph Twins - Supplied here finished in Black with Polished fin outer edges!

Inspired by the Webco finned cooling parts of the 1970s these are bolt on replacement for your stock clamps

These fit all the 900 and 1200 cc Triumph Twins except the Thruxton/Speed Twin 1200 which have a link pipe on the stock headers at the exhaust port that gets in the way.

These fit 2016 and UP: Street Twin/Speed Twin 900, Street Cup, Street Scrambler, Speedmaster, Bobber, T100, T120

MC PART ID: MMU505

MOTONE FINNED EXHAUST CLAMPS - LC - BLACK/CONTRAST POLISHED FINS

MOTONE SPEED DIAMOND SEAT FOR TRIUMPH SPEED TWIN 1200 - BLACK

$499.99

This is the MOTONE SPEED DIAMOND SEAT:

INJECTION MOLDED BASE
INJECTION MOLDED HIGH DENSITY POLYEURETHENE FOAM for max comfort
DIAMOND STITCH PATTERN

ONLY FITS SPEED TWIN 1200 & 1200 RS (ALL VARIANTS 2019 to NOW, EUR4, EUR5, and EUR5+ variants)

See separate listing for the "Blackadder" seat that fits other Triumph LC models including the Bonneville T100 / T120 / Street Scrambler / Street Twin/Speed Twin 900 which have a different subframe

MC PART ID: MSM034

MOTONE SPEED DIAMOND SEAT FOR TRIUMPH SPEED TWIN 1200 - BLACK

MOTONE STREET TRACKER SEAT - BLACK

$699.99

Street Tracker Seat - Available here Black

Slim cut precision injection molded Base Design with slim style race cushion

THIS IS A FLAT TRACKER Style Seat for your Triumph Twin

Inspired by King Kenny Racing XS650 and the almighty Harley XR750 and far too much time leafing through the pages of Sideburn magazine - we have done a very limited edition production of these seats here. Obviously, as a race-style seat you do not have the same amount of cushioning you would have with one of our regular seats like the Viper so please bear that in mind.

The seat works with all known configurations of tail tidies and rear mudguard setups including the stock ones however in our opinion for optimal looks it matches best with a short rear fender or a tail tidy such as the "Gort" as pictured.

Injection molded ABS seat base - Gloss Black Automotive Paint

Injection-molded high-density polyurethane foam

This Seat Fits 2016 and up :

Street Twin / Street Cup / Street Scrambler / T100 / T120 / Speed Twin 900 (up to 2024) / Scrambler 900

***Please Note SPEED TWIN 900 2025+ has new chassis/frame so this seat wont fit***

This Seat is specifically designed for the above frame and will not fit other frames (like the Speed Twin 1200 etc) - but if you nag Motone they might make a version for your bike as well ;)

MC PART ID: MSM037

MOTONE "THE BLACKADDER" LOW PROFILE SKINNY DIAMOND STITCH SEAT - BLACK

$499.99

The BLACKADDER - Available here Black

Slim cut low profile bench seat - the idea with this seat was to keep it as neat and trimmed back to the proportions of the frame as possible whilst maintaining optimal comfort - this stitch pattern is inspired by our ever popular Mamba Seat for the previous generation Bonnevilles - by popular request - now available for the liquid cooled bikes

Injection molded ABS seat base

Injection molded high density high comfort polyurethane foam

This Seat Fits 2016 and up :

Street Twin / Street Cup / Street Scrambler / T100 / T120 / Speed Twin 900 (up to 2024) / Scrambler 900

Please Note SPEED TWIN 900 2025+ has new chassis/frame so this seat wont fit (new version coming)

If you have a bike that is earlier than 2016 check out the Mamba or the Krait instead

MC PART ID: MSM028

MOTONE "THE BLACKADDER" LOW PROFILE SKINNY DIAMOND STITCH SEAT - TOBACCO BROWN

$499.99

The BLACKADDER - Available here in Tobacco Brown

Slim cut low profile bench seat - the idea with this seat was to keep it as neat and trimmed back to the proportions of the frame as possible whilst maintaining optimal comfort - this stitch pattern is inspired by our ever popular Mamba Seat for the previous generation Bonnevilles - by popular request - now available for the liquid cooled bikes

Injection molded ABS seat base

Injection molded high density high comfort polyurethane foam

This Seat Fits 2016 and up :

Street Twin / Street Cup / Street Scrambler / T100 / T120 / Speed Twin 900 (up to 2024) / Scrambler 900

Please Note SPEED TWIN 900 2025+ has new chassis/frame so this seat wont fit (new version coming)

If you have a bike that is earlier than 2016 check out the Mamba or the Krait instead

If you have a Speed Twin 1200 Check out the Speed Diamond

MC PART ID:

MSM036

MOTONE "THE VIPER" LOW PROFILE SKINNY RIBBED SEAT - BLACK

$499.99

The Viper - Available here Black

Slim cut low profile bench seat - the idea with this seat was to keep it as neat and trimmed back to the proportions of the frame as possible whilst maintaining optimal comfort

Injection molded ABS seat base

Injection molded high density high comfort polyurethane foam

This Seat Fits 2016 and up :

Street Twin / Street Cup / Street Scrambler / T100 / T120 / Speed Twin 900 (up to 2024) / Scrambler 900

Please Note SPEED TWIN 900 2025+ has new chassis/frame so this seat wont fit (new version coming)

MC PART ID: MSM025

MOTONE "THE VIPER" LOW PROFILE SKINNY RIBBED SEAT - RARE EARTH LT. BROWN

$499.99

The Viper - Available here in Rare Earth Light Brown

Slim cut low profile bench seat - the idea with this seat was to keep it as neat and trimmed back to the proportions of the frame as possible whilst maintaining optimal comfort

Injection molded ABS seat base

Injection molded high density high comfort polyurethane foam

This Seat Fits 2016 and up :

Street Twin / Street Cup / Street Scrambler / T100 / T120 / Speed Twin 900 (up to 2024) / Scrambler 900

Please Note SPEED TWIN 900 2025+ has new chassis/frame so this seat wont fit (new version coming)

Note: while pictures of the seat shown on the Bike are of the version for the air-cooled Bonneville, the pictures are intended to give you an idea of what it would look like on your bike liquid-cooled Bonneville as this seat is intended for the liquid-cooled Bonnevilles mentioned above.

MC PART ID: MSM032

MOTONE "THE VIPER" LOW PROFILE SKINNY RIBBED SEAT - TOBACCO BROWN

$499.99

The Viper - Dark Tobacco Brown

Slim cut low profile bench seat - the idea with this seat was to keep it as neat and trimmed back to the proportions of the frame as possible whilst maintaining optimal comfort

Injection molded ABS seat base

Injection molded high density high comfort polyurethane foam

This Seat Fits 2016 and up :

Street Twin / Street Cup / Street Scrambler / T100 / T120 / Speed Twin 900 (up to 2024) / Scrambler 900

Please Note SPEED TWIN 900 2025+ has new chassis/frame so this seat wont fit (new version coming)

MC PART ID: MSM026

MOTONE KING COBRA RIBBED SEAT FOR TRIUMPH BOBBER - BLACK

$499.99

When the Triumph Bobber first came out the first thing I wanted to change was the seat. If only it was that simple. 3 or 4 years later - this is the result - for safety we made the pan out of 4mm thick Steel which made for some fairly hefty tooling. For comfort we made the foam using a high-density polyurethane injection moulded closed-cell foam. We have done a few different stitch patterns - this one we call the King Cobra.

MC PART ID: MSM029

MOTONE KING COBRA RIBBED SEAT FOR TRIUMPH BOBBER - BLACK

RIZOMA HEADLIGHT GUARD FOR BMW R 1250 GS 2021-22 - ZBW064B

$504.51

Rizoma has, thanks to the rapid attachment/release system, designed its headlight guard to strike the right balance between practicality, looks, and function. The guard protects the GS headlight while the one-piece rim and high-quality PLEXIGLASS® provide outstanding protection. Caution: headlight guard ZBW064 has been developed for off-road use. Rad!

RIZOMA HEADLIGHT GUARD FOR BMW R 1250 GS 2021-22 - ZBW064B

UNIT GARAGE DARK SMOKE WINDSHIELD XL WITH GPS SUPPORT FOR TRIUMPH 1200 XC-XE

$499.99

Windshield XL with GPS support for Triumph 1200 XE-XC
Made of 4mm thick PMMA (Acrylic)
In this larger version we have further implemented aerodynamic protection. The front vent eliminates turbulence and the upper part is wider and more protective.

If you'd like to add a Unit Garage windshield sticker to the windshield, click here.

Code: 3105XL_DS

UNIT GARAGE DARK SMOKE WINDSHIELD XL WITH GPS SUPPORT FOR TRIUMPH 1200 XC-XE

UNIT GARAGE DARK SMOKE WINDSHIELD WITH GPS SUPPORT FOR TRIUMPH 1200 XC-XE

$434.99

Windshield with GPS support for Triumph 1200 XE-XC
Complete with supports and screws, it perfectly fits the style and lines of the front. Made of 4mm thick PMMA (Acrylic). It mounts very easily and offers excellent aerodynamic protection. The front louver eliminates turbulence, and the support tube doubles as a GPS mount.

If you'd like to add a Unit Garage windshield sticker to the windshield, click here.

Code: 3105DS

UNIT GARAGE DARK SMOKE WINDSHIELD WITH GPS SUPPORT FOR TRIUMPH 1200 XC-XE

UNIT GARAGE CLEAR WINDSHIELD WITH GPS SUPPORT FOR TRIUMPH 1200 XC-XE

$434.99

Windshield with GPS support for Triumph 1200 XE-XC - Clear Windshield

Complete with supports and screws, it perfectly fits the style and lines of the front. Made of 4mm thick PMMA (Acrylic). It mounts very easily and offers excellent aerodynamic protection. The front louver eliminates turbulence, and the support tube doubles as a GPS mount.

If you'd like to add a Unit Garage windshield sticker to the windshield, click here.

Code: 3105

UNIT GARAGE CLEAR WINDSHIELD WITH GPS SUPPORT FOR TRIUMPH 1200 XC-XE

UNIT GARAGE WINDSHIELD XL WITH GPS SUPPORT FOR NINET URBAN GS

$499.99

Windshield XL with GPS support for nineT Urban GS
Made of 4mm thick PMMA (Acrylic)
In this larger version we have further implemented aerodynamic protection. The front vent eliminates turbulence and the upper part is wider and more protective.
Colors: Transparent, dark smoke, yellow

NB: It can also be mounted with the original double instrument.

Optional code 3136 sticker. If you'd like to add a Unit Garage windshield sticker to the windshield, click here.

Code: 1690XL

UNIT GARAGE WINDSHIELD XL WITH GPS SUPPORT FOR NINET URBAN GS

MOTONE STREET TWIN SPEEDO BRACKET

$114.99

As the stock Triumph Street Twin is designed from the factory with a one piece Headlight and Speedo bracket assembly if you want to swap out the headlight brackets for something a little more subtle - or mount the light at a different orientation you'll also need a bracket to mount the speedo again.

We have seen other attempts at speedo brackets on the market, with various compromises - often cut from simple flat aluminium plate which will pick up the road vibrations causing at best inaccurate read outs at speed and at worst failing after a year or so of use.

The motone speedo bracket is structurally braced for strength as well as being manufactured using high pressure die casting. There is no other aftermarket component supplier you will find using these kind of techniques to make parts for your Triumph.

MC PART ID: MMU011

BEELINE MOTO CARRY CASE

$19.99 $14.99 Épargnez $5.00

Beeline Moto Case

This zippered EVA hard case has a soft, padded interior with room for your Beeline Moto and charging cable. Thanks to the handy carabiner, you can easily attach it to your belt, bag, or backpack and always have your Beeline Moto at hand.

Features:

The padded, soft inner lining provides protection from scratches and shocks
Convenient carabiner for individual attachment
Full-length zipper for easy removal

Contents:

1x Beeline Moto case

MOTONE DEFENDER MKI SUMP GUARD - BLACK

$299.99

Deep Drawn from type 5052 Aluminium Sheet - the Motone Defender Sump Guard is built to last. Hand Brushed and then anodised Black

DEFENDER MKI Suitable for 2016 and Up Modern Classic Triumph motorcycles, including: Street Twin, Street Cup, Street Scrambler, Thruxton 1200/R/RS, Speed Twin, T100 LC, T120

Will not fit the Triumph Speedmaster or Triumph Bobber. Please see the DEFENDER MK2 listing instead.

MC PART ID: MTE139

MOTONE DEFENDER MKII (BOBBER) SUMP GUARD - BLACK

$299.99

Deep Drawn from type 5052 Aluminium Sheet - the Motone Defender Sump Guard

Hand Brushed and then Anodised Black

Designed and Built to Last - there is a lot of junk out there

DEFENDER MKII Suitable for all years TRIUMPH BOBBER 1200 (Both the Bobber Black, Standard Bobber, Single Disc Bobber etc).

This part will not fit with factory forward controls therefore won't work with the Speedmaster 1200 which has forward controls on most common variants

MC PART ID: MTE182

MOTONE DEFENDER MKII (BOBBER) SUMP GUARD - BLACK

MOTONE BILLET RADIATOR GUARD KIT - UNION JACK - BLACK WIDE (BOBBER / SPEEDMASTER)

$259.99

Motone Rad Guard for Wider Rads of the Liquid Cooled Triumph Bobber and Speedmaster only

Casing precision milled out of 6061T Billet Aluminium and then anodised a matte black.

Rear grill is laser cut out of steel and finished in a black powder coat.

Full assembly comes ready to fit to your bike as a complete kit.

MC PART ID: KNS002

MOTONE BILLET RADIATOR GUARD KIT - UNION JACK - BLACK WIDE (BOBBER / SPEEDMASTER)

MOTONE BILLET RADIATOR GUARD KIT - UNION JACK - BLACK

$259.99

Motone Rad Guard for all Liquid Cooled Triumph Twins.

Casing precision milled out of 6061T Billet Aluminium and then anodised a matte black.

Rear grill is laser cut out of steel and finished in a black powder coat.

Full assembly comes ready to fit to your bike as a complete kit.

Good for all the liquid cooled bikes :

Street Twin, Street Cup, Street Scrambler, Thruxton, Thruxton R, Speed Twin 1200/RS, T100 LC, T120

Please note although this will fit the Bobber and the Speedmaster which have a slightly wider Rad there is also a specific wider version for those bikes - please see part KNS002

MC PART ID: KNS001

MOTONE BILLET RADIATOR GUARD KIT - UNION JACK - BLACK

MOTONE CUSTOM FUEL GAS CAP - BILLET ALUMINIUM - BLACK

$129.99

Custom lathed out of aviation grade 6061t Aluminum.

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for extra grip - the lower threaded part of the cap has a spring-bound valve system centrally located in the middle of the bung.

This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.

It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.

Some models it will fit include Bonneville, T100, America, Speedmaster, Thruxton. It will also fit on all post 1983 Harleys with regular right hand thread

FITS ALL YEARS BONNEVILLE THRUXTON, AMERICA, T100, SPEEDMASTER, SE, SCRAMBLER, BOBBER, STREET CUP, STREET SCRAMBLER, T120: 2001-2018 Present - Fits both CARB and EFI bikes.

Note: only suitable for Street Twin/Speed Twin 900 and Speed Twin 1200 up to 2024.

** NOT SUITABLE FOR 2025 TRIUMPH SPEED TWIN 900/1200 NOR ANY OF THE 2026+ TRIUMPH MODELS, CURRENTLY UNDER DEVELOPMENT **

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018 PRESENT SPORTSTER, 48, IRON ETC

MC PART ID: NXS006

MOTONE CUSTOM FUEL GAS CAP - BILLET ALUMINIUM - BLACK

MOTONE BLACKJACK UNION JACK MONZA CAP KIT FOR TRIUMPH & HD - CONTRAST POLISHED

$199.99

Supplied here with cap in Black Finish with Polished Fins

Kit Suitable for

Triumph Twins 2001-2015 (T100, Thruxton, SE, Scrambler)
Triumph Twins 2016-2025 (Bobber, T100, T120, Street Cup, Note: only suitable for Street Twin/Speed Twin 900 and Speed Twin 1200 up to 2024)
Harley Davidson 1983 and Up (Sportster, Dyna, etc)
Moto Guzzi V7
Royal Enfield Classic (with screw top type filler bung)

** NOT SUITABLE FOR 2025 TRIUMPH SPEED TWIN 900/1200 NOR ANY OF THE 2026+ TRIUMPH MODELS, CURRENTLY UNDER DEVELOPMENT **

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THESE BIKES (IN BLACK OR POLISH)

Monza cap built by Motone using modern HIGH PRESSURE DIE CAST technology

Triumph/HD Fuel tank adapter kit CNC formed out of billet aviation-grade aluminium

INSTRUCTIONS HERE

MC PART ID: NMX019+NMX003

MOTONE BLACKJACK UNION JACK MONZA CAP KIT FOR TRIUMPH & HD - CONTRAST POLISHED

MOTONE CUSTOM SOLID BRASS MONZA CAP KIT - LIMITED RUN

$249.99

We have handmade and polished a very short run of these caps.

Get them while they are hot - not for long

Kit Suitable for

Triumph Twins 2001-2015 (T100, Thruxton, SE, Scrambler)
Triumph Twins 2016-2025 (Bobber, T100, T120, Street Cup, Note: only suitable for Street Twin/Speed Twin 900 and Speed Twin 1200 up to 2024)
Harley Davidson 1983 and Up (Sportster, Dyna, etc)
Moto Guzzi V7
Royal Enfield Classic (with screw top type filler bung)

** NOT SUITABLE FOR 2025 TRIUMPH SPEED TWIN 900/1200 NOR ANY OF THE 2026+ TRIUMPH MODELS, CURRENTLY UNDER DEVELOPMENT **

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THESE BIKES (IN BLACK OR POLISH)

Triumph/HD Fuel tank adapter kit CNC formed out of billet aviation grade aluminium

INSTRUCTIONS HERE

MC PART ID:

NMX020+NMX003

MOTONE CUSTOM SOLID BRASS MONZA CAP KIT - LIMITED RUN

MOTONE CUSTOM FUEL GAS CAP - BILLET ALUMINIUM - SPUN SATIN FINISH

$129.99

Custom lathed out of aviation grade 6061t Aluminum.

This sale is for the complete new cap fully assembled and ready to fit on your bike. This version has spun Satin Finish.

Sides of the top cap knurled for extra grip - the lower threaded part of the cap has a spring-bound valve system centrally located in the middle of the bung.

This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.

It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.

FITS ALL YEARS TRIUMPH BONNEVILLE FAMILY BIKES FROM 2001 to 2025 INCLUDING T100, T120, STREET CUP, STREET SCRAMBLER, BOBBER, SPEEDMASTER, THRUXTON 900, SCRAMBLER, SE, AMERICA.

Note: only suitable for Street Twin/Speed Twin 900 and Speed Twin 1200 up to 2024.

** NOT SUITABLE FOR 2025 TRIUMPH SPEED TWIN 900/1200 NOR ANY OF THE 2026+ TRIUMPH MODELS, CURRENTLY UNDER DEVELOPMENT **

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THES BIKES (IN BLACK OR POLISH)

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018 PRESENT SPORTSTER, 48, IRON ETC

MC PART ID: NXS010

MOTONE CUSTOM FUEL GAS CAP - BILLET ALUMINIUM - SPUN SATIN FINISH

MOTONE CUSTOM FUEL GAS CAP - BILLET BRASS & ALUMINIUM

$139.99

Custom lathed out of aviation grade 6061t Aluminum.

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for extra grip - the lower threaded part of the cap has a spring-bound valve system centrally located in the middle of the bung.

This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.

It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.

Some models it will fit include Bonneville, T100, America, Speedmaster, Thruxton. It will also fit on all post 1983 Harleys with regular right hand thread

FITS ALL YEARS TRIUMPH BONNEVILLE FAMILY BIKES FROM 2001 to 2025 INCLUDING T100, T120, STREET CUP, STREET SCRAMBLER, BOBBER, SPEEDMASTER, THRUXTON 900, SCRAMBLER, SE, AMERICA.

Note: only suitable for Street Twin/Speed Twin 900 and Speed Twin 1200 up to 2024.

** NOT SUITABLE FOR 2025 TRIUMPH SPEED TWIN 900/1200 NOR ANY OF THE 2026+ TRIUMPH MODELS, CURRENTLY UNDER DEVELOPMENT **

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THES BIKES (IN BLACK OR POLISH)

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018 PRESENT SPORTSTER, 48, IRON ETC

MC PART ID: NXS003

MOTONE CUSTOM FUEL GAS CAP - BILLET BRASS & ALUMINIUM

MOTONE CUSTOM FUEL GAS CAP - BILLET BRASS & ALUMINIUM - SPUN SATIN FINISH

$139.99

Custom turned on a lathe out of aviation grade Brass and 6061t Aluminum.

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for extra grip - the lower threaded part of the cap has a spring-bound valve system centrally located in the middle of the bung.

This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.

It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.

Some models it will fit include Bonneville, T100, America, Speedmaster, Thruxton. It will also fit on all post 1983 Harleys with regular right hand thread

FITS ALL YEARS TRIUMPH BONNEVILLE FAMILY BIKES FROM 2001 to 2025 INCLUDING T100, T120, STREET CUP, STREET SCRAMBLER, BOBBER, SPEEDMASTER, THRUXTON 900, SCRAMBLER, SE, AMERICA. Note: only suitable for Street Twin/Speed Twin 900 and Speed Twin 1200 up to 2024.

** NOT SUITABLE FOR 2025 TRIUMPH SPEED TWIN 900/1200 NOR ANY OF THE 2026+ TRIUMPH MODELS, CURRENTLY UNDER DEVELOPMENT **

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THES BIKES (IN BLACK OR POLISH)

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018 PRESENT SPORTSTER, 48, IRON ETC

MC PART ID: NXS011

MOTONE CUSTOM FUEL GAS CAP - BILLET BRASS & ALUMINIUM - SPUN SATIN FINISH

MOTONE INFINITY GAS CAP - BRASS RIPPLED TOP - ALUMINIUM THREAD

$139.99

Custom lathed out of Brass and aviation grade 6061t Aluminum.

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap in brass have been knurled for extra grip - the lower threaded part of the cap in aluminum has a spring-bound valve system centrally located in the middle of the bung.

This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.

It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.

FITS ALL YEARS TRIUMPH BONNEVILLE FAMILY BIKES FROM 2001 to 2025 INCLUDING T100, T120, STREET CUP, STREET SCRAMBLER, BOBBER, SPEEDMASTER, THRUXTON 900, SCRAMBLER, SE, AMERICA.

Note: only suitable for Street Twin/Speed Twin 900 and Speed Twin 1200 up to 2024.

** NOT SUITABLE FOR 2025 TRIUMPH SPEED TWIN 900/1200 NOR ANY OF THE 2026+ TRIUMPH MODELS, CURRENTLY UNDER DEVELOPMENT **

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THES BIKES (IN BLACK OR POLISH)

FITS ALL HARLEY DAVIDSON WITH SCREW IN CAPS 1983-2018 SPORTSTER, 48, IRON, ETC

MC PART ID: NXS001

MOTONE INFINITY GAS CAP - BRASS RIPPLED TOP - ALUMINIUM THREAD

MOTONE INFINITY GAS CAP - BILLET ALUMINIUM - RIPPLED

$129.99

Custom lathed out of aviation grade 6061t Aluminum.

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for extra grip - the lower threaded part of the cap has a spring-bound valve system centrally located in the middle of the bung.

This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.

It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.

Some models it will fit include Bonneville, T100, America, Speedmaster, Thruxton. It will also fit on all post 1983 Harleys with regular right hand thread

FITS ALL YEARS BONNEVILLE THRUXTON, AMERICA, T100, SPEEDMASTER, SE, SCRAMBLER, BOBBER, STREET CUP, STREET SCRAMBLER, T120 : 2001-2018 Present - Fits both CARB and EFI bikes.

Note: only suitable for Street Twin/Speed Twin 900 and Speed Twin 1200 up to 2024.

** NOT SUITABLE FOR 2025 TRIUMPH SPEED TWIN 900/1200 NOR ANY OF THE 2026+ TRIUMPH MODELS, CURRENTLY UNDER DEVELOPMENT **

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018 PRESENT SPORTSTER, 48, IRON ETC

MC PART ID: NXS002

MOTONE INFINITY GAS CAP - BILLET ALUMINIUM - RIPPLED

MOTONE TRIUMPH ENGINE TEMP GAUGE OIL FILLER CAP - °C (CELSIUS VERSION) - BLACK

$96.99

Engine Oil Filler Cap with Built in Temperature Gauge

Housing Machined out of Billet Aluminium
Fitted with oil resistant O-Ring seal
This Version : CELSIUS C

T100 / T120 / STREET TWIN / SPEED TWIN / STREET CUP / THRUXTON / BOBBER / SPEEDMASTER / STREET SCRAMBLER / SCRAMBLER 1200 / S

FITS ALL 900/1200 Twins 2016-Today

MC PART ID: LC-MMU621-C

MOTONE TRIUMPH ENGINE TEMP GAUGE OIL FILLER CAP - °C (CELSIUS VERSION) - BLACK

MOTONE 2001-2015 AC TRIUMPH ENGINE TEMP GAUGE OIL FILLER CAP - °C (CELSIUS VERSION) - BLACK

$96.99

Engine Oil Filler Cap with Built in Temperature Gauge

Housing Machined out of Billet Aluminium
Fitted with oil resistant O-Ring seal
This Version : CELCIUS C

FITS ALL 2001-2015 TRIUMPH TWINS

Bonneville, T100, Scrambler, SE, Thruxton, Speedmaster, America

MC PART ID: AC-MMU621-C

MOTONE 2001-2015 AC TRIUMPH ENGINE TEMP GAUGE OIL FILLER CAP - °C (CELSIUS VERSION) - BLACK

MOTONE PARABOLA ENGINE OIL FILLER CAP - DISHED - BRASS

$74.99

First of our new series of Dished Custom Parts - the PARABOLA - BRASSY EDITION

Engine Oil Filler Cap

Lathe Turned out of in BRASS
Fitted with oil resistant O-Ring seal

FITS ALL YEARS HINCKLEY BONNEVILLE

T100 / T120 / STREET TWIN / SPEED TWIN / STREET CUP / THRUXTON / BOBBER / SPEEDMASTER / STREET SCRAMBLER / SCRAMBLER 1200 / SE

FITS ALL 790/865/900/1200 Twins 2001-Today

MC PART ID: MMU620

MOTONE PARABOLA ENGINE OIL FILLER CAP - DISHED - BRASS

MOTONE ENGINE OIL FILLER CAP - ROSWELL - SOLID BLACK

$64.99

Engine Oil Filler Cap

High Pressure Die Cast in Aluminium
Fitted with oil resistant O-Ring seal
Can be tightened by hand or with hex head
Black

FITS ALL YEARS HINCKLEY BONNEVILLE

T100 / T120 / STREET TWIN / SPEED TWIN / STREET CUP / THRUXTON / BOBBER / SPEEDMASTER / STREET SCRAMBLER / SCRAMBLER 1200 / SE

FITS ALL 790/865/900/1200 Twins 2001-Today

MC PART ID: MMU054

MOTONE ENGINE OIL FILLER CAP - ROSWELL - SOLID BLACK

MOTONE ENGINE OIL FILLER CAP - ROSWELL - CONTRAST BLACK/POLISH

$64.99

Engine Oil Filler Cap

High Pressure Die Cast in Aluminium
Fitted with oil resistant O-Ring seal
Can be tightened by hand or with hex head
Inlay is painted with a black heat paint, then masked as outside face is then mirror polished by hand

FITS ALL YEARS HINCKLEY BONNEVILLE

T100 / T120 / STREET TWIN / SPEED TWIN / STREET CUP / THRUXTON / BOBBER / SPEEDMASTER / STREET SCRAMBLER / SCRAMBLER 1200 / SE

FITS ALL 790/865/900/1200 Twins 2001-Today

MC PART ID: MMU055

MOTONE ENGINE OIL FILLER CAP - ROSWELL - CONTRAST BLACK/POLISH

MOTONE ENGINE OIL FILLER CAP - ROSWELL - BRASS

$74.99

Engine Oil Filler Cap

Cast in Solid CZ122 Brass
CNC Machined thread
Fitted with oil resistant O-Ring seal
Can be tightened by hand or with hex head

FITS ALL YEARS HINCKLEY BONNEVILLE

T100 / T120 / STREET TWIN / SPEED TWIN / STREET CUP / THRUXTON / BOBBER / SPEEDMASTER / STREET SCRAMBLER / SCRAMBLER 1200 / SE

FITS ALL 790/865/900/1200 Twins 2001-Today

MC PART ID: MMU058

MOTONE ENGINE OIL FILLER CAP - ROSWELL - BRASS

RIZOMA ENGINE OIL FILLER CAP - TP043B

$74.99

Rizoma Engine Oil Filler Cap for Triumph Bobber, Street Twin, T120, Thruxton 1200/1200R.

Features:

Machined from billet aluminum
Black color available - for other color options please contact us
Rizoma Part Number TP043B

MOTONE CYLINDER STUD KNUCKLES CAPS - BLACK

$64.99

Cold Forged out of Aluminum Billets these are sold in sets of 4 and come supplied with grab nuts and an Allen key to fix them onto the head of the cylinder stud bolts at the top of the cylinder.

They fit all the Triumph Twins made from from 2016 to now including the T120, Bobber, Thruxton, T100, Speedmaster, Speed Twin, Street Twin, Street Scrambler, Scrambler 1200 and Street Cup.

Supplied here in Stealth Black

MC PART ID: MMU085

MOTONE CYLINDER STUD KNUCKLES CAPS - BLACK

MOTONE THE ZEPHYR - T120 INTAKE COVERS / THROTTLE BODY TRIM - BLACK

$114.99

The Zephyr - Metal Intake Covers in Black Suitable for your T120 Motorcycle

Fits all years Triumph T120 from 2016 to Today

Formed out of High Pressure Die Cast Aluminium

Sold as a Set with both Left and Right pieces included and finished in our signature wrinkle powder Black

These are a bolt on piece and can be fit at home in minutes

MC PART ID: MMU578

MOTONE THE ZEPHYR - T120 INTAKE COVERS / THROTTLE BODY TRIM - BLACK

MOTONE THE BELTANE - BOBBER/SPEEDMASTER BATTERY STRAP - BLACK LEATHER & BRASS

$94.99

The Beltane Leather Battery Strap in Black Suitable for your LC TRIUMPH BOBBER or SPEEDMASTER Motorcycle

Fits all years LC Triumph BOBBER and SPEEDMASTER 1200

Premium Grade Leather - Stitched Back - Brass fittings and Stainless Clip

These are a bolt-on piece and can be fit at home in minutes

MC PART ID: BBB001

MOTONE THE BELTANE - BOBBER/SPEEDMASTER BATTERY STRAP - BLACK LEATHER & BRASS

MOTONE STREET TWIN RIBBED SIDE PANELS - GLOSS BLACK

$364.99

Custom Ribbed side panels for Triumph Street Twin

High quality precision injection molded ABS.

Ribs aligned specifically with the fin angle on the stock cylinders

Aluminium mesh on panel indents

GLOSS BLACK AUTOMOTIVE PAINT FINISH

Known to fit Street Cup and Street Twin

Sold as a pair.

MC PART ID: MTE140

MOTONE STREET TWIN RIBBED SIDE PANELS - GLOSS BLACK

MOTONE VENTURA BOBBER/SPEEDMASTER RIBBED SIDE PANELS - GLOSS BLACK

$329.99

Custom Ribbed side panels for Triumph Bonneville Bobber / Speedmaster 1200

High quality precision injection molded ABS.

Ribs aligned specifically with the fin angle on the stock cylinders

Aluminium mesh on panel indents

GLOSS BLACK AUTOMOTIVE PAINT FINISH

Sold as a pair.

MC PART ID: MTE163

MOTONE VENTURA BOBBER/SPEEDMASTER RIBBED SIDE PANELS - GLOSS BLACK

MOTONE THE ZEPHYR MK.II - BOBBER/THRUXTON INTAKE COVERS / THROTTLE BODY TRIM - BLACK

$114.99

The Zephyr - Metal Intake Covers in Black Suitable for your THRUXTON 1200 or TRIUMPH BOBBER Motorcycle

Fits all years Triumph THRUXTON 1200 (S/R/RS) and BOBBER and SPEEDMASTER 1200

Formed out of High-Pressure Die Cast Aluminium

Sold as a Set with both Left and Right pieces included and finished in our signature wrinkle powder Black

These are a bolt-on piece and can be fit at home in minutes

MC PART ID: MMU579

MOTONE THE ZEPHYR MK.II - BOBBER/THRUXTON INTAKE COVERS / THROTTLE BODY TRIM - BLACK

MOTONE CUTLASS CHAIN GUARD FOR TRIUMPH BOBBER - GLOSS BLACK

$199.99

This is the CUTLASS our new Chain Guard for the Triumph Bobber and Speedmaster 1200

It's a proper full-length chain guard not a strange imitation of one that seems to have become popular of late on the aftermarket, presumably because its alot easier to make a little one than a proper one

Made out of Steel and finished in Gloss Black - Bolt-On for your Bike

MC PART ID: MTE206

MOTONE CUTLASS CHAIN GUARD FOR TRIUMPH BOBBER - GLOSS BLACK

MOTONE GLADIUS CHAIN GUARD FOR SPEED TWIN 1200/THRUXTON 1200 - BLACK

$99.99

Formed out of stainless steel sheet for strength and Wrinkle Powder Coat - BLACK - this is the Gladius Chain Guard.

Fitment: designed to fit the Triumph Speed Twin 1200 and Thruxton 1200 (all variants).

MC PART ID: CSS015

MOTONE GLADIUS CHAIN GUARD FOR SPEED TWIN 1200/THRUXTON 1200 - BLACK

MOTONE VINTAGE HOT FORGED BRASS CHAIN ADJUSTER

$94.99

To make these adjuster blocks we decided to return to the manufacturing process of a bygone era to produce the kit, namely Hot Forged Brass.

To produce a truly individual product the chain adjusters are hand-polished to reveal the facets of the forging process.

A thick Grade 304 Stainless Boss also included

Suitable for use on all the liquid cooled Twins including:

Street Twin (Speed Twin 900)
Street Scrambler (Scrambler 900)
Street Cup
Bobber
T100
T120
Thruxton 1200/R/RS
Scrambler 1200
Speedmaster
Speed Twin 1200

MC PART ID: MMU066

MOTONE VINTAGE HOT FORGED BRASS CHAIN ADJUSTER

MOTONE GIGER SHORT REACH HEADLIGHT BRACKETS 41MM - BLACK

$329.99

GIGER BRACKETS

Shorter Reach than our regular billet brackets the Giger allow for a more tucked in look, depending on the bike, the size of the headlight bucket and if there is any electrical gear behind the headlight bucket will determine whether these can be used on your bike or not

An extensive machining process has been employed to mill each of these brackets straight out of a single block of billet aluminium including all the curves and radiuses.

Includes stainless mounting bolts - designed to slide over and clamp onto any 41mm fork.

Fitment is simple you just need to either get your bike on the centre stand or stand it up straight, undo the fork clamps and the yoke bolt and you can slide the top yoke right off (the top half of the triple tree assembly)

Reach from centre of Fork Leg to Headlight Mounting Bolt is 98mm

Known to fit

Triumph Bonneville T100/Scrambler/Thruxton from 2001 to 2015

Royal Enfield Interceptor/Continental

Street Twin. Street Cup. Street Scrambler - on the early models where the regulator is under the yoke it needs to be moved down for more clearance (we do a bracket for this MMU064) - on the 2019 and Up models where the Reg/Rec is located in front of the Rad the headlight brackets will work straight away. We also make a Speedo bracket for the Street Twins whose Speedo is attached to the stock headlight brackets.

The 2016 and up T100 and T120 has a larger headlight bucket which makes tucking the headlight in problematic with the Giger brackets, we recommend the original Motone Billet brackets for these bikes (MTE046)

MC PART ID: MTE047

MOTONE GIGER SHORT REACH HEADLIGHT BRACKETS 41MM - BLACK

MOTONE SLINGSHOT CUSTOM HEADLIGHT BRACKETS 41MM - BLACK

$219.99

Custom 5-Axis CNC milled out of a single block of aviation grade billet 6061t aluminium.

Includes all fixings necessary to mount to bike - Bolt on part - Easy to fit.

These will fit any bike with 41mm Diameter Front Forks

We have tested them on Triumph Bonneville T100 from 2001 to now. Street Twin. Street Cup. T120. Bobber etc.

Note: the stock Triumph Street Twin 900 is designed from the factory with a one piece Headlight and Speedo bracket assembly. As such, if you want to swap out the headlight brackets for something a little more subtle like these Motone Slingshot headlight brackets - or mount the light at a different orientation you'll also need a bracket to mount the speedo again. Motone have created the Street Twin Speedo Bracket to allow you to remount your speedo should you choose to swap out the stock headlight brackets for these more tasteful Slingshot brackets.

MC PART ID: MTE046

MOTONE SLINGSHOT CUSTOM HEADLIGHT BRACKETS 41MM - BLACK

MOTONE HIGH-TAIL CUSTOM MUDGUARD PREDRILLED FOR MOTONE FENDER LIGHT KITS - BLACK ANODISED - LC

$349.99

This is our High-Tail rear mudguard available here in brushed/Black Anodised finish

The high tail mudguard exits at the top of the frame of your bike - this means that it only works on the T120/T100 when with in conjunction with a custom seat (for example any of the Motone seats like the Viper or the Rattler) but not on the stock seat on the T120/T100 which has an overhang at the rear of the frame.

Street Cup/Street Twin/Street Scrambler stock seats do not have this issue.

Machine rolled out of 5052 Aluminium, Trimmed, Drilled and then Black Anodised - this rear mudguard is bolt-on for your Triumph Bonneville.

This version of the fender comes pre drilled ready to mount any of the Motone Fender Mount Light Kits (Eldorado, Bel Air, Lecter, Cuda, Big Fin etc).

It also has a hole for wiring loom (we recommend our part code DDM012) to pass through

NOTE: Motone Fender Light Kit (e.g. Eldorado Gloss Black or Eldorado Matte Black) number plate bracket, and wiring loom (e.g. DDM012) must be purchased separately. Please click on the links if you'd like to add these to your cart as well.

Fits 2016 and Up

Bonneville T100
Bonneville T120
Street Cup
Street Twin
Street Scrambler
Fender measures 570mm (22.5 inches) long measuring along the circumference from front to back.

180mm in width (7 inches)

To answer a common question - Fitting a High Tail Mudguard negates the need for a separate tail tidy

Please Note SPEED TWIN 900 2025+ has new chassis/frame so this mudguard wont fit (new version coming)

MC PART ID: MTE178