MOTORCYCLE PARTS

RIZOMA RALLY PEGS - PE640B

$250.99

RIZOMA RALLY PEGS - PE640B

The new RALLY Pegs provide maximum grip and comfort thanks to the removable and replaceable steel teeth. The hollow body, machined from the billet aluminium, lightens the weight and does not retain mud even in the most extreme conditions. The result is a perfect blend of beauty and function.

Features:

CNC-machined for a precise fit and finish
Aggressive roll of machined serrations
Wider platform to aid in your off-road adventure
Rizoma's proprietary anodizing on the main body
Laser engraved
Sold as a pair
Made in Italy
Rizoma part number PE640B
Note: Rizoma Footpeg Mounts are required and sold separately. Please contact us or visit the Rizoma website to determine the correct footpeg mounts for your make, year and model of bike: http://www.rizoma.com/universal/peg-for-oem-mounts/pe640/en

MOTONE RANGER FOOT PEGS - RIDER SET FOR TRIUMPH BOBBER - BLACK

$159.99

Investment cast out of 300 Series Stainless Steel and Powder Coated in Black - These are the Rangers - Now available for your Triumph Bobber

These will not fit the Speedmaster if you are running forward controls (if you have moved the pegs back to Bobber mid position then they will fit ok)

All good with all years Triumph Bobber

MC PART ID: MMU502

MOTONE RANGER FOOT PEGS - RIDER SET FOR TRIUMPH BOBBER - BLACK

MOTONE RANGER FOOT PEGS - RIDER SET FOR LC TRIUMPHS - BLACK

$159.99

Ranger Foot Pegs - Investment Cast Grade 304 Stainless finished in Black Powder

Available here as a set for the Rider (Pair Left and Right) when your bike is setup for solo riding

Suitable for 2016 and Up Street Twin & Speed Twin 900/ Street Cup / Street Scrambler & Scrambler 900 / T100 / T120 / Speed Twin 1200 / Thruxton 1200

MC PART ID: MMU501

MOTONE RANGER FOOT PEGS - RIDER SET FOR LC TRIUMPHS - BLACK

MOTONE PASSENGER PEG DELETE / BLANKING PLATES

$64.99

Top Quality custom CNC milled from aviation grade billet 6061t aluminum.

NOTE : This Passenger Peg is designed to blank the passenger peg bracket in situations where you no longer need to hang an exhaust of the hanger (for example you have a short exhaust system or your exhausts mounts elsewhere) - we also make an alternative Passenger Peg Delete with a much larger bolt that you can hang an exhaust off

A simple yet elegant solution for removing the rear passenger pegs, 5 minutes to fit and easily reversible.

Includes all stainless fixings/washers.

Available here Anodised Black with contrast cut chamfer as pictured.

Fits all Triumph Twins from 2001 to Today

MC PART ID: OTS016

MOTONE PASSENGER PEG DELETE / BLANKING PLATES

MOTONE BRASS FRANKEN BOBBINS - PADDOCK STAND FIXING KIT

$114.99

Brass Bobbins suitable for use on Triumph Bobber, Triumph Speedmaster, and other makes and models listed below.

Franken Bobbins

They come with a polished stainless boss as well as stainless M8 Bolts which are 50mm Long

The Franken Bobbins can also be used on most any bike that has facility to take a Bobbin supported by a M8 Bolt, including: Triumph Bobber, Triumph Speedmaster, Triumph Scrambler 1200, Triumph Thruxton 1200, Triumph Speed Twin 1200, Royal Enfield Interceptor, Triumph Speed Triple, Street Triple

MC PART ID: MMU067

MOTONE BRASS FRANKEN BOBBINS - PADDOCK STAND FIXING KIT

MOTONE CUSTOM BILLET INDICATOR TURN SIGNALS - M10 - SET OF 4 - BLACK

$319.99

Motone Billet Turn Signals

This Sale : 2xPAIRs [4 TURNSIGNALS] - ANODISED BLACK (AMBER BULBS, BOTH AMBER AND CLEAR LENSE INCLUDED)

Each turn signal comes with both a Clear and an Amber lense included in the package so you can assemble it as to your personal preference.

Turn Signal Body and Housing turned out of billet 6061 aluminium.

Osram 12v Amber bulbs included in the package. Lenses 40mm diameter and are e-marked. Thread stem is turned out of 10mm stainless with 30mm of usable length (M10 x 30)

MC PART ID: 2XXNM002B

MOTONE CUSTOM BILLET INDICATOR TURN SIGNALS - M10 - SET OF 4 - BLACK

MOTONE PICO LED 3-IN-1 BRAKE LIGHT/TAILLIGHT/INDICATOR TURN SIGNALS - PAIR - BLACK - M8

$259.99

MOTONE PICOMULTI LED 3in1 :

TURN SIGNAL (INDICATORS)
BRAKE LIGHT
RUNNING LIGHT (TAIL LIGHT)

SOLD HERE: PAIR [2 LIGHTS]

ECE R148 - LAB TESTED FULLY COMPLIANT ROAD LEGAL
CUSTOM PCB
FULL METAL JACKET - ALUMINIUM HOUSING
ORSAM SMD LED
BRAIDED CABLES TERMINATING IN 3.9MM BULLET CONNECTORS
WATERPROOF
RUBBER BOOT CABLE TIDY
INPUT: DC 12v

SPECS

Indicator Light Power: 1.2W
Running Light Power: 0.5W
Brake Light Power: 1.2W
Indicator Brightness: 77 Cd
Running Light Brightness: 9 Cd
Brake Light Brightness: 50 cd
PMMA LENS (TIR Optical Lense tech)
SIZE W 18 x H 44 x D 25.5 mm
MOUNTED ONTO A M8 THREAD

There are 4 Wires exiting each Light Unit - Functionality is as follows:

RED - BRAKE LIGHT
YELLOW - INDICATOR
BROWN - RUNNING LIGHT
BLACK - EARTH NEUTRAL

Combine with various Motone brackets and adapters to fit anywhere on your bike:

Brackets for front of bike:

Billet Adapter Brackets mount M8 Indicators such as the PICO direct to stock Triumph Indicator position (2016 and up bikes)
Clampit Brackets to mount to front fork 41mm (other sizes also coming)
Boomerang Bracket - fits on the bottom yoke suitable for the Street Twin/Speed Twin 900

Brackets for rear of bike:

V2 Shock Mount Brackets to mount to rear shock
Under Seat Brackets LC Triumph - Use the bolt holes under the rear of the seat to fit Indicators towards rear of frame - Liquid Cooled Bonneville so 2016 to 2025+)
Under Seat Brackets AC Triumph - Under seat brackets for the aircooled (2001-2015) Bonnevilles
Triline Brackets to mount to Rear Shock
Ajax - Designed specifically for the Triumph Bobber these brackets allow you to fit signals onto the rear of the bike using the airbox bolts
Number Plate Brackets - Adapter Brackets that allow the lights to be fit direct to your rear number plate bracket without needing to drill any holes etc

Wiring Adapters

Please note if you have one of our tail tidies or rear loom adapters they would already terminate in a 3.9mm Bullet so plug and play from there on
Each Light Unit has 4 Wires that terminate in a standard Japanese spec 3.9mm Bullet - The Red wire is the Brake Light, the Yellow wire is the Running Light, the Brown Wire is the Indicator Light and the Black is the Earth/Neutral
We have a Wiring Loom adapter for the Triumph Bobber / Scrambler 1200 that can be run directly with these MULTI 3in1 Indicators available here part code DDM016

MC PART ID: MFX004

MOTONE PICO LED 3-IN-1 BRAKE LIGHT/TAILLIGHT/INDICATOR TURN SIGNALS - PAIR - BLACK - M8

MOTONE PICO LED INDICATOR TURN SIGNALS - PAIR - BLACK - M8

$219.99

MOTONE PICO LED T/S : TURN SIGNAL / INDICATORS

SOLD HERE : PAIR [2 TURN SIGNALS]

ECE R50 - LAB TESTED FULLY COMPLIANT ROAD LEGAL
CUSTOM PCB
FULL METAL JACKET - ALUMINIUM HOUSING
ORSAM SMD LED
BRAIDED CABLES TERMINATING IN 3.9MM BULLET CONNECTORS
WATERPROOF
RUBBER BOOT CABLE TIDY
PMMA LENS
SIZE W 18 x H 44 x D 25.5 mm
MOUNTED ONTO A M8 THREAD

Combine with various Motone brackets and adapters to fit anywhere on your bike:

Brackets for front of bike:

Billet Adapter Brackets mount M8 Indicators such as the PICO direct to stock Triumph Indicator position (2016 and up bikes)
Clampit Brackets to mount to front fork 41mm (other sizes also coming)
Boomerang Bracket - fits on the bottom yoke suitable for the Street Twin/Speed Twin 900

Brackets for rear of bike:

V2 Shock Mount Brackets to mount to rear shock
Under Seat Brackets LC Triumph - Use the bolt holes under the rear of the seat to fit Indicators towards rear of frame - Liquid Cooled Bonneville so 2016 to 2025+)
Under Seat Brackets AC Triumph - Under seat brackets for the aircooled (2001-2015) Bonnevilles
Triline Brackets to mount to Rear Shock
Ajax - Designed specifically for the Triumph Bobber these brackets allow you to fit signals onto the rear of the bike using the airbox bolts
Number Plate Brackets - Adapter Brackets that allow the lights to be fit direct to your rear number plate bracket without needing to drill any holes etc

Wiring Adapters

Please note if you have one of our tail tidies or rear loom adapters they would already terminate in a 3.9mm Bullet so plug and play from there on.

DDM011: Wiring Adapter to Convert to OE Triumph Wiring Plugs (2016 to 2025+)
DDM004: Wiring Adapter to Convert to OE Triumph 2001-2015
DDM014: Wiring Adapter for Royal Enfield 650
DDM005: Wiring Adapter for Royal Enfield Meteor/Hunter 350

MC PART ID: MFX003

MOTONE PICO LED INDICATOR TURN SIGNALS - PAIR - BLACK - M8

MOTOGADGET MO.BLAZE DISC TURN SIGNAL - BLACK

$169.99

mo.blaze disc by Motogadget – a turn signal for handlebar end installation in a trend-setting design.

The mo.blaze disc is the latest generation of turn signal lights. The characteristic feature of the LED turn signal is the transparent light-emitting disc on a compact aluminium base providing the harmonious finish of the handlebar end.

This is already the third generation of our turn signals using the motogadget TranzLight-Technology® (TLT, patent pending). This progressive approach to development is not limited to the miniaturization of turn signal casings. Furthermore, it creates new lighting concepts directly through a crystal-like plastic body. Only the precision of CAD calculations and state-of-the-art manufacturing processes allow this new design and its performance opportunities.

The luminous flux required for the TranzLight technology is generated by the intensiLED® procedure developed by Motogadget. It consists of three important pillars:

Specifically selected, high output LED with maximum efficiency and 7W total output and a service life of more than 50,000 hours.

IC controlled constant power source with 330 kHz pulses.

Special collimator optics, that precisely bundles the emission light from the LED into the plastic body.

The subtle aluminium casing is used for the secure mount of the plastic body only and includes the electronic control system and high-end LEDs. Traditionally, the casing is machined using CNC technology, available with an anodized black or mirror polish surface and furnished with an elegant finish of laser inscriptions.

The turn signal for handlebar end installation has a very low construction height and, due to the transparent disc, the mo.blaze shows up with a very neutral and subtle look. That's why the mo.blaze is the perfect match to many styles and all types of motorbikes.

Like any other conventional LED turn signal, the turn signal kit can be operated with load resistors or any of our load independent flasher relays (mo.flash, mo.wave, mo.stop, mo.relay+).

The mo.blaze disc has E mark and front turn signal approval.

The price is per EACH turn signal. Always make sure to order a complete set consisting of the left and right side turn signal assembly.

MOTOGADGET MO.BLAZE DISC TURN SIGNAL - BLACK

MOTOGADGET MO.BLAZE PIN TURN SIGNAL - BLACK

$79.99

The mo.blaze pin turn signal from Motogadget – setting new benchmarks for bolt-on turn signals with Power LED technology.

Its tiny dimensions and minimal design make it almost disappear on the vehicle. Due to the IntensiLED® Technology, the emitted light is extremely bright when switched ON and definitely can no longer be overseen. Additionally, greatest visibility and safety will be ensured by the patented TranzLight® Technology (TLT) with a wide beam angle.
The bolt-on turn signal is ECE approved as a front and rear direction indicator. The aluminium casing is CNC machined and available with an anodized black or mirror polish surface.

Like any other typical LED turn signal, the Motogadget turn signal can be operated with load resistors or any of our load-independent flasher relays (mo.flash, mo.wave, mo.stop, mo.relay+).

This sale is for EACH turn signal. Please order two turn signals for a pair and four turn signals for front and rear use.

Advantages

Absolute unique, new design and principle of operation (light control by TranzLight® Technology)
Extremely discreet appearance due to transparent glass body and very small aluminium base
Highest luminosity, achieved by state-of-the-art high output LED technology (IntensiLED®)
Electronic voltage conditioning by IC controlled constant power source with 330kHz pulses and safe protection electronics
Extremely bright light in radiation direction, highly visible light in nearly all directions

Parts included

1x mo.blaze pin turn signal w/ M8 thread
M8 nut
Approx. 100 cm connector cable
Installation instructions

MOTOGADGET MO.BLAZE PIN TURN SIGNAL - BLACK

RIZOMA ACTION TURN SIGNAL/INDICATOR - FR028B

$89.99

Compact design and bold lines ensure ACTION turn signals add an aggressive touch to your motorcycle. Use of the very latest SMD LED technology ensures compliance with European homologation standards.

Use of the very latest SMD LED technology ensures compliance with European homologation standards.
(12 V - 2 W) - M8 THREAD
To fit the indicators, the wiring kit is required.
Rizoma indicators come standard with a pair of resistors (10 W / 15 Ω ea.). To avoid errors in bikes equipped with a control indicator on the dashboard (only BMW R nine T models from 2017 onwards), we recommend installation of the resistance kits EE149H (3 W - 38 Ω), which completely replace the resistance kit contained in the packaging of the Rizoma indicators which therefore should not be used.

Part number: FR028B

RIZOMA ACTION TURN SIGNAL/INDICATOR - FR028B

RIZOMA VISION SEQUENTIAL TURN SIGNAL BLACK - FR130B

$165.99

RIZOMA VISION SEQUENTIAL TURN SIGNAL BLACK - FR130B

Be more visible in traffic and turn heads on the streets with the Rizoma Vision Sequential Turn Signals. They feature sequential high-intensity LEDs in a compact and sleek aluminium body. The lines and angles of these signals will be a great match for any of the modern sportbikes and naked bikes. In terms of brightness, stock signals can't even come close...these are bright!

Sold individually.

Sequential blinking pattern adds valuable visibility and safety.

Note: Includes "bullet style" wire connectors for install. For an easier install, order the Rizoma cablet adapters that fit your bike for a true Plug 'n Play connection.

Note: Optional turn signal adapter mounting plates are available for bikes that will have a gap left from the OEM turn signals mounting indentation.

Note: Optional 32 mm blinker stem extenders (FR300B) are also available and sold separately if you need a bit more clearance.

RIZOMA VISION SEQUENTIAL TURN SIGNAL BLACK - FR130B

RIZOMA IRIDE SIGNAL LIGHT - FR160B

$146.06

RIZOMA iRIDE SIGNAL LIGHT

The Rizoma Iride Turn Signal is a fusion of the classic bullet shape turn signal with premium LED and lens technology.

Rizoma turn signal lights are characterized by their aerodynamic lines, top quality materials and modern design accessories.

TURN SIGNAL.. IRIDE is made from billet aluminum and uses the latest-generation SMD LED technology with high lighting intensity which complies with European homologation standards. An innovative, even more compact design updates its conspicuously Classic Style.

Sold individually.

Note: Includes "bullet style" wire connectors for install. For an easier install, order the Rizoma "no splice" cable adapters that fit your bike for a true Plug 'n Play connection.

Note: Optional turn signal mounting adapter plates are available for bikes that will have a gap left from the OEM turn signals mounting indentation.

Note: Optional 32 mm blinker stem extenders (FR300B) are also available and sold separately if you need a bit more clearance.

Features:

E-Homologation
SMD LED technology
Machined from billet aluminum
High light intensity
Small dimensions
Classic Style
Made in Italy
Rizoma part number FR160B
Mounting instructions

RIZOMA INDICATOR LIGHT ADAPTORS - FR227B

$26.13

Indicator Mounting Adapters to Cover the OEM indicator fixing hole.

These indicator adapters are built to fit the OEM holes exactly: put one plate of the adapter on the outside and the other one on the inside of the fairing. The fairing will be sandwiched between the two plates of the adapter.

The plate is made of plastic and fits every 8mm shank indicator (8mm fixing hole).

Every kit has 4 plates for 2 indicators.

Plates are made in plastic.

Fitment:

Indicator Mounting Adapters Front or Rear for Yamaha MT-07 21-, MT-09 17-, Tenere 700, Tracer 7, XJR 1300, MT-03, R7, Rear for TMAX 560 & YZF-R1 20-, kit for a pair of indicators

RIZOMA INDICATOR LIGHT ADAPTORS - FR227B

RIZOMA INDICATOR LIGHT ADAPTORS - FR230B

$26.13

Indicator Mounting Adapters for KTM, Husqvarna

Compatible Models:

HUSQVARNA SVARTPILEN 401 (2018 - 19).

HUSQVARNA SVARTPILEN 401 (2020).

HUSQVARNA VITPILEN 701 (2018 - 19).

HUSQVARNA VITPILEN 701 (2020).

KTM 1090 ADVENTURE R (2017 - 19).

KTM 1090 ADVENTURE S - L (2017 - 19).

KTM 125 DUKE ABS (2013 - 16).

KTM 1290 SUPER ADVENTURE S (2017 - 20).

KTM 1290 SUPER DUKE R (2020).

KTM 1290 SUPER DUKE R ABS (2014 - 16).

KTM 390 DUKE ABS (2012 - 16).

KTM 790 DUKE (2018 - 20).

KTM 790 DUKE (2019).

CHARACTERISTICS:

Each specific adapter is specially made for the corresponding motorcycle model to ensure the best possible fit.

These adapters are made of PVC.

RIZOMA INDICATOR LIGHT ADAPTORS - FR230B

RIZOMA TECHNOPOLYMER HOLDER FOR LIGHT UNIT TURN SIGNAL - FR440B

$55.35

The Rizoma mounting shell for the LIGHT UNIT turn signal, has been designed to flexibly mount the LIGHT UNIT turn signal on a wide range of bikes. Properly combined with the Rizoma turn signal mounting kits, with which it perfectly integrates just by pressure coupling, it easily allows the fitting of LIGHT UNIT signals on the bike front, rear or directly on Rizoma license plate supports.

Technical Information

A kit contains 2 pcs. These adapters are made of EPDM with stainless steel threaded screw.
Thread: M8x1.25
Compatible with Rizoma Light Unit turn signals and Rizoma mounting kits only.
Warning: avoid installation too close to the exhaust system because heat sources could damage the EPDM shell.

RIZOMA TECHNOPOLYMER HOLDER FOR LIGHT UNIT TURN SIGNAL - FR440B

MOTOGADGET MO.UNIT CABLE KIT

$119.99

The mo.unit Cable Kit is a ready assembled cable set to create a wiring harness. With this cable kit made of high quality stranded copper cable, you can easily and quickly create a complete wiring harness on the motorcycle. The different cross-sections and cable colors are ideal for use with the mo.unit and are quite sufficient in quantity and length for many vehicles. To assemble these cables individually so is relatively costly for the non-professional. Also included in the kit are various cable ties and ferrules. A total of 1 kg of cable and material.

MOTOGADGET MO.UNIT BLUE

$659.99

The mo.unit blue is an on-board electrical system control unit that enables the quick and easy installation of new vehicle electrics without special knowledge. The digital vehicle upgrade is the Bluetooth connection to the smartphone with innovative functions such as keyless go, tour logs, vehicle management and much more.

The mo.unit blue is a digital control center, the heart of the entire vehicle electrical system. It can be operated both with push-button fittings and with conventional, switching handlebar fittings. The mo.unit switches all components in the vehicle via wear-free, high-performance semiconductor switches and takes over the tasks of the electrical fuses. Various relays, connectors and individual components in the wiring harness can be dispensed with, allowing a new, minimized vehicle wiring system to be set up quickly and easily.

The mo.unit blue has 12 inputs, 10 outputs and interchangeable quality cable clamps. Coupling via Bluetooth to the mo.ride smartphone app is unique in the motorcycle accessories sector. The mo. ride app is a complete vehicle management system that is used to configure the mo.unit and the alarm system. Fast fault diagnosis during operation, tour logging with statistics, maintenance planning, encrypted keyless go and Rideassist via helmet headset are all possible.

Functions

Push-button control for 4 or 5-button operation
Replacement of the vehicle fuses
Alarm system
Load-independent flasher relay
Hazard warning lights
Blinker as position light (adjustable)
Time-controlled blinker switch-off
Path-controlled turn signal deactivation (speedometer sensor required)
Parking light and headlight flasher integrated
Control of low beam and high beam with one button
Stop light modulator (8 adjustable modes)
Emergency stop light
Garage light
Fan run-on
Hyperbeam (200W high beam + low beam)
Starter relay for starter with magnetic switch (max. 30 A)
Intelligent switch-off of consumers at startup
Integrated, digital horn relay
Two configurable additional outputs AUX1 and AUX2
Complete wiring system diagnostic function
Defect detection of all light sources

Functions with the mo.ride app

Keyless-Go (ready to start when approached with a smartphone)
Tour log in mo.ride with fun factor, number of bends, top speed, etc.
Alarm events with date, time, vehicle on the ground, etc.
Setting the mode and sensitivity of the alarm system
Monitoring the battery voltage
Diagnosis of all inputs and outputs with currents and voltage
Defect detection of light sources
Rideassist: turn signal sound and errors as audio via helmet headset
Manual switching of outputs via smartphone (except starter)
Firmware updates at any location
Configuration of the setup menu
Vehicle management with information on maintenance tasks
All trips and messages in chronological order in the logbook
Display of parking position and Ping! to help with vehicle search
Secure, encrypted connection via Bluetooth® LE
ultra-low-power standby: low power consumption when stationary

Compatibility

iPhone from iOS 15 / Android from 11 (availability may be limited)
Further information at mo.ride.de

Technical Data

Dimensions 90 x 53 x 30mm (L/W/H)
Waterproof, vibration-resistant - IP69
Weight approx. 180 g
Fastening 2 x M5 screw, distance 74mm
Operating voltage 9 V - 15 V
Operating temperature -20° to +80°C

Inputs

Ignition lock +12V or mo.lock
Turn signal left
Turn signal right
Light
Starter
Horn
Brake light
Kill
Side stand
LIN bus
AUX1
AUX2

Outputs

Turn signal left
Turn signal right
Low beam
High beam
Starter
Horn
Brake light
Ignition
AUX1 (Universal)
AUX2 (Universal)

Scope of delivery

mo.unit blue
Positive pole screw M5
2 M5 fastening screws with nuts and washers

can be ordered separately in the accessories category:

Battery connection cable
Battery connection cable with vehicle main fuse
Cable kit for complete vehicle wiring
Bus terminal Earth connector
mo.lock ignition lock
Speedometer sensor and 2 neodymium mounts

MOTONE TRIUMPH TURN SIGNAL WIRING ADAPTER FOR LC BONNIES 2016 AND UP

$29.99

Sold as a pair - these adapters allow Motone and other aftermarket turn signals to be plugged straight into the stock factory loom, no splicing of cables required.

Suitable for use on all the liquid-cooled (LC) Bonnies from 2016 and up:

Street Twin, T100, T120, Bobber, Street Cup, Thruxton S, Thruxton R

Each pair of adapters will work with a pair of turn signals. Therefore, if you're installing four signal lights, order a quantity of two (2) to receive two pairs.

MC PART ID: DDM011

MOTONE TRIUMPH TURN SIGNAL WIRING ADAPTER FOR LC BONNIES 2016 AND UP

MOTONE PLUG AND PLAY WIRING HARNESS ADAPTER - LC TRIUMPHS

$44.99

Plug and play wiring loom for all the Liquid Cooled Triumph Twins meaning all the twins 2016 and up

Euro 4 and Euro 5: Street Twin/Speed Twin 900, Street Cup, T100, T120, Thruxton R, Thruxton S, Street Scrambler,

Euro 4 Speed Twin 1200 (2019-2020)

Does not fit Bobber and Speedmaster (See DDM016) and Euro 5 Speed Twin 1200 (2022 and on) - (new one for this coming soon)

Our Adapter comes both colour and letter coded with each function banded together and labelled for easy use.

NOTE : MOTONE LOOM INCLUDES DIODE INLINE TO PREVENT ECU WARNING LIGHT ERROR ON NON-TRIUMPH LIGHTS

It also utilises all 6 of the stock loom plugs giving you an extra live connector to run any auxiliary devices

T : Tail light -

RED - BRAKE Light

YELLOW - RUNNING Light

BLACK - Earth

L : Left Indicator/Turn Signal

BROWN - LHS Signal

BLACK - Earth

R : Right Indicator/Turn Signal

ORANGE - RHS Signal

BLACK - Earth

A : Auxiliary Live

GREEN - AUX

BLACK - Earth

Note : 6-Way loom connector hermetically sealed to prevent water ingress

MC PART ID: DDM012

MOTONE PLUG AND PLAY WIRING HARNESS ADAPTER - LC TRIUMPHS

MOTONE REAR WIRING LOOM - PLUG AND PLAY - BOBBER/SPEEDMASTER

$74.99

Plug and Play Rear wiring Loom - this connects directly into the rear harness plug of your bike and allows you to fit after market Taillights, Indicators, Accessories etc. without having to chop into the stock loom

This Loom our part code DDM016 fits:

All Years Triumph Bobber
All Years Speedmaster 1200

Note that his loom contains a resistor to stop the issue of causing the engine warning light to come on when fitting aftermarket Tail lights.

Wired as Follows:

Orange - R - is RHS Indicator
Brown - L - is LHS Indicator
As part of the T (Tail light) Section we have YELLOW as the Running Light, RED as the Brake Light as well as associated Earths for each of the above

The Tail light connectors all have double spades in the case that you are running for example our Pico 3in1 Rear lights which means you essentially have 2 tail lights (one on each side)

There is also a spare A Auxiliary Wire in Green which has its own earth, you can either use this to power an external device or you can use it to power a Number Plate Illumination Light if you are running a side mount plate kit which doesn't have a tail light with a license plate illumination light section of its own.

And remember the top 3 electrical faults are 1 Bad Earth, 2 Bad Earth, 3 Bad Earth. Always check fuse box - and for belt and braces you may want to disconnect first battery before plugging in new parts.

Note: while Motone's website says this loom will work for the Triumph Scrambler 1200, if you intend on installing 3in1 signal lights, you will need to add an inline 37 ohm 2 watt resistor to the brake light wire on the 3in1 indicator to allow the brake light to function properly. Otherwise, when you apply the brake, it will remain the same brightness as the running light and will appear as if the brake light isn't working. As such, we don't recommend purchasing this harness for your 1200 scrambler unless you are prepared to install an inline resistor and are knowledgeable about such installation.

MC PART ID: DDM016

MOTONE REAR WIRING LOOM - PLUG AND PLAY - BOBBER/SPEEDMASTER

MOTONE REAR WIRING LOOM - PLUG AND PLAY - MULTI VERSION - LC TRIUMPHS

$49.99

MULTI VERSION for optional use with 3in1 Rear Lights and a Tail Light at the same time (also works with regular tail light as well)

Plug and play wiring loom for all the Liquid Cooled Triumph Twins meaning all the twins 2016 and up

Euro 4 and Euro 5: Street Twin, Street Cup, T100, T120, Thruxton R, Thruxton S, Street Scrambler,

Euro 4 Speed Twin (2019-2020)

***Does NOT fit Bobber and Speedmaster (See DDM016) and Euro 5 Speed Twin 2022 and on - (See DDM017)***

Our Adapter comes both colour and letter coded with each function banded together and labeled for easy use.

NOTE: MOTONE LOOM INCLUDES DIODE INLINE TO PREVENT ECU WARNING LIGHT ERROR ON NON-TRIUMPH LIGHTS

It also utilises all 6 of the stock loom plugs giving you an extra live connector to run any auxiliary devices

T: Tail light - (CAN CONNECT TAIL LIGHT and 2 MULTI FUNCTION 3in1s at the same time)

RED - BRAKE Light [TRIPLE SPADE CONNECTORS]

YELLOW - RUNNING Light [TRIPLE SPADE CONNECTORS]

BLACK - Earth [TRIPLE SPADE CONNECTORS]

L: Left Indicator/Turn Signal

BROWN - LHS Signal

BLACK - Earth

R: Right Indicator/Turn Signal

ORANGE - RHS Signal

BLACK - Earth

A: Auxiliary Live

GREEN - AUX

BLACK - Earth

Note: 6-Way loom connector hermetically sealed to prevent water ingress

MC PART ID: DDM021

MOTONE REAR WIRING LOOM - PLUG AND PLAY - MULTI VERSION - LC TRIUMPHS

MOTONE PLUG AND PLAY WIRING HARNESS ADAPTER - SPEED TWIN 1200 EURO 5 ONLY

$49.99

MULTI VERSION for optional use with 3in1 Rear Lights and a Tail Light at the same time (also works with regular tail light as well)

Plug and play wiring loom Specifically for

Euro 5 Speed Twin 1200 (2021-NOW) ONLY

Does NOT fit Bobber and Speedmaster (See DDM016) and Euro 4 Speed Twin 2019-2020 (See DDM021)

Our Adapter comes both colour and letter coded with each function banded together and labelled for easy use.

NOTE: MOTONE LOOM INCLUDES DIODE INLINE TO PREVENT ECU WARNING LIGHT ERROR ON NON-TRIUMPH LIGHTS

It also utilises all 6 of the stock loom plugs giving you an extra live connector to run any auxiliary devices

T : Tail light - (CAN CONNECT TAIL LIGHT and 2 MULTI FUNCTION 3in1s at the same time)

RED - BRAKE Light [TRIPLE SPADE CONNECTORS]

YELLOW - RUNNING Light [TRIPLE SPADE CONNECTORS]

BLACK - Earth [TRIPLE SPADE CONNECTORS]

L : Left Indicator/Turn Signal

BROWN - LHS Signal

BLACK - Earth

R : Right Indicator/Turn Signal

ORANGE - RHS Signal

BLACK - Earth

A : Auxiliary Live

GREEN - AUX

BLACK - Earth

Note: 6-Way loom connector hermetically sealed to prevent water ingress

MC PART ID: DDM017

MOTONE PLUG AND PLAY WIRING HARNESS ADAPTER - SPEED TWIN 1200 EURO 5 ONLY

RIZOMA TURN SIGNAL WIRING KIT - EE082H

$33.50

The Rizoma wiring kit is needed when fitting Rizoma turn signals (and Rizoma mirrors with integrated turn signals). We recommend checking the technical specifications before purchase. Each kit contains 2 sets of wires. To fit 4 turn signals, it is necessary to purchase 2 kits.

Technical Info

To fit indicators, the wiring kit is required.
We recommend checking the technical specifications before purchase.
Each kit contains 2 sets of wires.
To fit 4 indicators, it is necessary to purchase 2 kits.

MOTONE AJAX REAR FRAME INDICATOR BRACKETS FOR TRIUMPH BOBBER - PAIR - BLACK

$89.99

Sold as a pair.

These are the Ajax the latest edition of our Triline Indicator Brackets specifically designed for the Triumph Bobber

Having seen various adaptations on the road utilizing some of our existing turn signal brackets plus various spacers etc we thought we would design a specific version for the Bobber, especially with our upcoming Icon and Pico turn signals which also come in a 3in1 form (Brake/Running/Turn Signal)

These brackets fit using the existing air box screws at the rear of the frame and provide a mounting point where you can fit any 8 or 10mm Turn signal or Indicator.

They are also spaced horizontally so that the legal (UK/EU) distance between left and right signals is maintained

We have formed these out of high pressure die-cast aluminum and they come with stainless bolts and fixings

Sold as a Set of 2 pieces (1 Left and 1 Right sided piece)

MC PART ID: MMU592

MOTONE AJAX REAR FRAME INDICATOR BRACKETS FOR TRIUMPH BOBBER - PAIR - BLACK

MOTONE UNDER SEAT/REAR FRAME INDICATOR BRACKETS LC - PAIR - BLACK

$69.99

Sold as a pair.

These are the latest brackets we have made allowing you to fit indicators to the rear of your bike using the 2 bolt holes on either side at the top of your frame.

These can be run in various combinations with our parts, depending on the rear mudguard of your bike and which make indicators you have and the length of threads they run

As is we have designed the holes to bolt on using any

Indicators with 8mm Threads
Indicators with 10mm Threads
OEM Triumph LED Indicators

As well as the above if you have a high and wide rear fender and want to fit with indicators that have particularly long threads, or you simply want to space your indicators out wider apart then you can fit this part in combination with our Billet Indicator Adapters ADT002 (for 8mm Indicators), or ADT003 (for 10mm Indicators)

Fits

Street Twin
Street Cup
Street Scrambler
T100 LC
T120
Thruxton 1200
Speed Twin

Note if you have another accessory using these holes already it may still be possible to fit them both concurrently - use some washers under the seat latch to raise it up a few mm in this instance

MC PART ID: MMU521

MOTONE UNDER SEAT/REAR FRAME INDICATOR BRACKETS LC - PAIR - BLACK

MOTONE "THE CLAMPITS" - 41MM - INDICATOR/TURN SIGNAL FORK MOUNT BRACKETS - BLACK

$89.99

Ladies and Gentlemen these are the Clampits - SOLD AS A PAIR

Built out of High Pressure Die Cast Aluminium (we also have a similar version in Aluminum for you Americans) these clamps wrap around your fork - in this case any 41mm fork - and you can bolt on your Indicator - they will work with Indicators that have 8 or 10mm sized threads (so any of the ones we make and most all of the ones out in the world)

Depending on your bike and the overall look you are going for you may wish to position your indicators at the front or rear side of the fork - these work either way around.

Other versions for other fork sizes are also in development

Common Bikes with 41mm Forks Include - Triumph Bonneville, T100, T120, Street Twin, Scrambler 900, Mag Wheel, Royal Enfield Interceptor, new Honda CB350, and many more

MC PART ID: MMU587

MOTONE "THE CLAMPITS" - 41MM - INDICATOR/TURN SIGNAL FORK MOUNT BRACKETS - BLACK

MOTONE WRAP-AROUND FORK MOUNT INDICATOR M8 TURN SIGNAL BRACKET CLAMPS - PAIR - 47MM - BLACK (BOBBER)

$124.99

Custom CNC milled from aviation grade billet 6061t aluminium.

Includes a custom-turned billet nut which slides down over the thread of your turn signal stem.

The clamps are designed primarily to be used with Motone indicators which run on a M8 stainless bolt

Available here Anodised Black PAIR

FITS BOBBER BLACK (47mm fork)

FITS ALL BIKES WITH 47MM FORKS

ALSO INCLUDES M8 SLEEVED SLEEVED BOLTS

MC PART ID: CL8-047B

MOTONE WRAP-AROUND FORK MOUNT INDICATOR M8 TURN SIGNAL BRACKET CLAMPS - PAIR - 47MM - BLACK (BOBBER)

MOTONE SHOCK MOUNT TRILINE INDICATOR BRACKETS - PAIR - BLACK

$74.99

Sold as a pair.

Motone TRILINE Turn Signal / Indicator brackets in a BLACK finish. Sold as a pair with 2 x M8x30mm stainless mounting bolts

The brackets are designed to mount flush on the top eyelets of the rear shocks. At the other end of the bracket there is a hole which will take the bolt from your turn signal (suitable for any size 8mm or 10mm thread - both work fine)

They fit many makes of motorcycle - we supply here with a bolt that is suitable for use on a lot of shocks including all of the modern Triumph twins.

FITS ALL YEARS HINKLEY BONNEVILLE T100/SE/SCRAMBLER/THRUXTON/STREET CUP/T120/SPEED TWIN 1200: 2001-Present

For non Triumph use please note - The supplied bolts have 30mm of thread, the stock bolts on the triumph twins have 20mm, so if you are using on a non-triumph or custom application please measure whatever bolts your shocks are currently using and add an extra 10mm to the length and thats how long bolts you will need.

MC PART ID: MMU005

MOTONE SHOCK MOUNT TRILINE INDICATOR BRACKETS - PAIR - BLACK

MOTONE INDICATOR/TURN SIGNAL BRACKETS FOR LC TRIUMPHS 10MM - PAIR - BLACK

$64.99

Sold as a pair.

CNC Machined out of Billet Aluminium and Anodised Black, these adapters fit directly onto the stock Indicator Mounts to allow you to fit an aftermarket Indicator with a regular 10mm Thread. The final position angle of your indicator is controlled by a stainless grub screw which locks the Indicator light in place.

This version (ADT002) is for Indicators/Turn Signals with 10mm Threads (Such as Motone Billet Indicators, MC PART ID NXM002B)

We also have an alternative version for Indicators with 8mm threads (e.g. Rizoma, Kellerman) which is part ADT002.

Fitment:

Suitable for Street Twin, T100, T120, Thruxton, Bobber, Street Cup, Street Scrambler, Speed Twin

These also work with Street Triple and Speed Triple and other modern Triumph motorcycles

MC PART ID: ADT003

MOTONE INDICATOR/TURN SIGNAL BRACKETS FOR LC TRIUMPHS 10MM - PAIR - BLACK

MOTONE INDICATOR/TURN SIGNAL BRACKETS FOR LC TRIUMPHS 8MM - PAIR - BLACK

$64.99

Sold as a pair.

CNC Machined out of Billet Aluminium and Anodised Black, these adapters fit directly onto the stock Indicator Mounts to allow you to fit an aftermarket Indicator with a regular 8mm Thread. The final position angle of your indicator is controlled by a stainless grub screw which locks the Indicator light in place.

This version (ADT002) is for Indicators/Turn Signals with 8mm Threads (Such as Rizoma / Kellermann etc)

We also have an alternative version for Indicators with 10mm threads (e.g. Motone Billet Indicators) which is part ADT003.

Fitment:

Suitable for Street Twin, T100, T120, Thruxton, Bobber, Street Cup, Street Scrambler, Speed Twin

These also work with Street Triple and Speed Triple and other modern Triumph motorcycles

MC PART ID: ADT002

MOTONE INDICATOR/TURN SIGNAL BRACKETS FOR LC TRIUMPHS 8MM - PAIR - BLACK

MOTONE SHOCK MOUNT INDICATOR BRACKETS V2 FOR ALL INDICATORS - PAIR - BLACK

$49.99

Sold as a pair.

New Shock mount 2.0 Indicator brackets will work on many different types, makes, and models of bikes with capability to mount

Pretty much Any known Aftermarket Indicator out there (8 or 10mm Thread no problem)
Triumph OEM (Factory Original) Type Indicators

Can be fit on outside or inside of Shock depending on the type of shock you have.

Includes blanking plates if not using the OEM holes.

Each bracket can be fit on either side of the bike

Made out of Stainless Steel and Powder Coated in Black

MC PART ID: MMU585

MOTONE SHOCK MOUNT INDICATOR BRACKETS V2 FOR ALL INDICATORS - PAIR - BLACK

MOTONE NUMBER/LICENSE PLATE "L-CLAMP" BRACKET REAR INDICATOR/TURN SIGNAL MOUNTS

$39.99

New License Plate Indicator L-Clamp Brackets

L shaped they clip into the slots that you would normally use to Bolt your Number Plate to the Plate Hanger/Bracket (e.g. Motone Round Tail Light Bracket OR Motone GORT Tail Light Bracket)

Indicator brackets work with

All Aftermarket Indicator out there (8 or 10mm Thread no problem)
Triumph OEM (Factory Original) Type Indicators

Includes blanking plates if not using the OEM holes

Made out of Stainless Steel and Powder Coated in Black

Sold as a pair.

MC PART ID: MMU586

MOTONE NUMBER/LICENSE PLATE "L-CLAMP" BRACKET REAR INDICATOR/TURN SIGNAL MOUNTS

MOTONE PROF. AXELROD - PADDOCK STAND AXLE BOBBIN KIT - BRASS

$114.99

Threaded Stainless Rod - This version in Brass

2 Bobbins - For using a Paddock Stand at home (so you dont need to lug a centre stand around attached to your bike all the time!)

Fits

Street Twin / Street Cup / Street Scrambler / Speed Twin / Thruxton R / Thruxton RS

Also fits T100 and T120 as long as you have swapped out the original silencers for something more tasteful (surely you have a set of Motone ones?)

MC PART ID: MMU551

MOTONE PROF. AXELROD - PADDOCK STAND AXLE BOBBIN KIT - BRASS

MOTONE PROF. AXELROD - PADDOCK STAND AXLE BOBBIN KIT - STAINLESS

$114.99

Threaded Stainless Rod - This version in Billet 300 Series Stainless

2 Bobbins - For using a Paddock Stand at home (so you don't need to lug a centre stand around attached to your bike all the time!)

Fits

Street Twin / Street Cup / Street Scrambler / Speed Twin / Thruxton R / Thruxton RS

Also fits T100 and T120 as long as you have swapped out the original silencers for something more tasteful (surely you have a set of Motone ones?)

MC PART ID: MMU550

MOTONE PROF. AXELROD - PADDOCK STAND AXLE BOBBIN KIT - STAINLESS

MOTONE STAINLESS FRANKEN BOBBINS - PADDOCK STAND FIXING KIT

$99.99

Stainless Steel Bobbins suitable for use on Triumph Bobber and Triumph Speedmaster

Franken Bobbins

They come with a polished stainless boss as well as stainless M8 Bolts which are 50mm Long

The Franken Bobbins can also be used on most any bike that has facility to take a Bobbin supported by a M8 Bolt

Includes : Triumph Bobber, Triumph Speedmaster, Triumph Scrambler 1200, Triumph Thruxton 1200, Triumph Speed Twin 1200, Royal Enfield Interceptor, Triumph Speed Triple, Street Triple

MC PART ID: MMU081

MOTONE STAINLESS FRANKEN BOBBINS - PADDOCK STAND FIXING KIT

KRIEGA OS FOOTREST ELIMINATORS YAMAHA T7

$65.95

OS-FOOTREST ELIMINATOR YAMAHA T7

Provides an alternative mounting location for the front straps on an OS-BASE YAMAHA TENERE 700 when the rear footrests are removed.

Available in two options for bikes with a Standard Seat or a Rally Seat.

FEATURES

Ultra durable CNC machined Nylon-6
High impact resistance
Uses standard fitting hardware

WEIGHT
85g / 3oz per pair

PRODUCT CODE
Standard Seat - KOSFEYS
Rally Seat - KOSFEYR

KRIEGA OS FOOTREST ELIMINATORS YAMAHA T7

Gift Card

$25.00

Shopping for someone else but not sure what to give them? Give them the gift of choice with a Strath Moto gift card.

Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees. You can redeem them online by entering the code received at checkout. Alternatively, they can also be redeemed in-store - just present your gift card to us at time of purchase. Easy peasy.

PARTS CANADA HOSE CLAMP EMBOSSED 10-16

$17.95

The smooth concave-convex stamped band and flared edge prevents hoses from damage during installation
Slim 9 mm band with low profile head design is perfect for those tight applications
Corrosion resistant appropriate for multiple applications including marine
Material and clamping range are stamped on band for easy identification

MOTONE KHAN COBRA SEAT - FULL DIAMOND - TRIUMPH BOBBER

$499.99

When the Triumph Bobber first came out the first thing I wanted to change was the seat, if only it was that simple

3 or 4 years later - this is the result - for safety we made the pan out of 4mm Thick Steel which made for some fairly hefty tooling

For comfort we made the foam using a high density polyurethane injection moulded closed cell foam

We have done a few different stitch patterns - this one we call the Khan Cobra

MC PART ID: MSM031

MOTONE KHAN COBRA SEAT - FULL DIAMOND - TRIUMPH BOBBER

MOTONE WRAP-AROUND FORK MOUNT INDICATOR TURN SIGNAL BRACKET CLAMPS - M8 - PAIR - 41MM - BLACK

$124.99

Custom CNC milled from aviation grade billet 6061t aluminium.

DESIGNED TO FIT INDICATORS WITH A 8MM (M8) Threaded Bolt - For Example like the PICO and ICON Indicators we make

Includes a custom turned billet nut which slides down over the thread of your turn signal stem

Available here Anodised Black PAIR

FITS ALL BIKES WITH 41MM FORKS (Including many Triumph Modern Classics T100, Street Twin, T120, Scrambler 900 etc, as well as RE Interceptor, Honda CB350, and many more

Alternative version for M10 Thread Indicators available here.

MC PART ID: CL8-041B

MOTONE WRAP-AROUND FORK MOUNT INDICATOR TURN SIGNAL BRACKET CLAMPS - M8 - PAIR - 41MM - BLACK

MOTONE PRESSURE CAST DISC BRAKE OIL RESERVOIR MASTER CYLINDER CAP - UNION JACK DOMED - BLACK

$89.99

High Pressure Die Cast aluminium with domed ribbed Union Jack design

Fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars.

Fits :

Bonneville, T100, America, T120, Speedmaster, Thruxton, Bobber

MC PART ID: MMU073

MOTONE PRESSURE CAST DISC BRAKE OIL RESERVOIR MASTER CYLINDER CAP - UNION JACK DOMED - BLACK

RIZOMA MOUNTING KIT FOR BAR-END MIRROR - BS818B

$62.31

MOUNTING KIT FOR BAR-END MIRROR

Each specific mirror adapter is specially made for the corresponding motorcycle model to ensure the best possible fit on the handlebar, combining practicality and comfort without compromising the minimalist visual impact.

To determine whether this part will fit your bike, please visit the Rizoma site and select your make and model and year of bike: https://www.rizoma.com/en/bs819.html?moto=12331