SPRING SALE!

A top-spec, waterproof, CORIUM+® laminated leather/textile jacket for multi-season on-road touring.

The Valve H2O is our fully loaded touring jacket prepared for asphalt adventures in any season. Thanks to the combination of waterproof CORIUM+® leather on the arms and the breathable 3L CORIUM+® textile laminate on the body of the motorcycle jacket, you are always fully protected from the elements. A detachable thermal liner will keep you warm while riding in colder temperatures. And to improve your comfort level even more, we added a detachable storm collar to keep away the wind and rain from your neck.

When the temperatures start to rise while riding, you can easily direct cool air to your upper body with the help of our VCS|Aquadefence ventilation system. Just open up the flaps on the chest and secure them with the magnetic Fidlock® system. All of this can be done with one hand while riding. By opening the ventilation zippers on the back, the warm air from inside the jacket can easily escape, helping to keep your upper body at the ideal temperature.

Rain or shine, cold or warm, it doesn’t really matter. The Valve H2O motorcycle jacket will get you to your destination in comfort.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

Top-spec, waterproof, CORIUM+® laminated leather/textile pants for multi-season on-road touring.

Take on any asphalt adventure in any weather with the high-tech and versatile Valve H2O motorcycle pants. We took our time when it came to the design of the Valve H2O pants; to make sure they were created and suitable for all-season riding. Thanks to the combination of waterproof CORIUM+® leather on the hips, knees, and rear and the breathable 3L hydratex waterproof laminate on the body of the pants, you are always fully protected from bad weather.

A detachable thermal liner will keep you warm while riding in colder temperatures. On warmer days you can easily direct cool air to your upper legs with the help of our VCS|Aquadefence system. Just open up the flaps on the legs and secure them with the magnetic Fidlock® system. All of this can be done with one hand, with gloves on, while riding. Don’t compromise comfort and protection during your next touring adventure.

The Valve H2O motorcycle pants will keep fully protected from the elements during every minute of your adventure tour ride, and help to keep you safe at the same time.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada. 

Waterproof overpants for commuting and touring.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Comfortable, easy on/off, adjustable, CE-certified neck brace

Protect your neck with the Segur neck brace. Wearing a neck brace has been proven to significantly reduce neck injuries by protecting the cervical vertebrae of the spine against the force of an impact. Our Segur neck brace helps to reduce possible neck injuries caused by hyper-flexion, hyper-extension, axial load, shear load, lateral hyper-flexion and whiplash by limiting rotation and transferring excessive load from the neck to the rest of the body. Its lightweight and versatile construction comes with various useful features for rider security and protection. It is fully adjustable, and to ensure maximum comfort, the size of the neck brace can be changed with the side adjustment system. The lateral profile and chest fitment can be adjusted by mounting the supplied EVA foam padding. Because of the low-profile back section, it doesn’t interfere with the rider’s helmet. The Segur can also be easily opened and closed with the high-quality metal front fastening system. The adjustable back column of this neck brace is foldable so takes up much less space when not in use. The neck brace comes with a storage bag for its protection when it’s not being used or for during transport. The Segur conveniently attaches to a selection of REV'IT! jackets with the dedicated connection kit that comes in the package. Or it can be worn on its own with the supplied harness. Stay safe out there!

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

Although the Sand 4 gloves have been designed to create a perfect match with the Sand 4 H2O outfit, these gloves are bound to become the go-to gloves for a large audience of adventure riders across the globe. This pair of hand protection has been specifically designed and engineered for summer use, providing optimal grip, breathability, and ventilation. To make sure your hands stay cool and dry during hot summer rides, the gloves are constructed of strong and abrasion-resistant mesh stretch fabrics combined with a high-tech TPR knuckle protector that is designed to direct the airflow into the glove and onto the hands of the rider. Multiple perforation holes on the outside and inside increase the breathability even more. For additional protection, we added TPR protectors on the fingers and thumbs; providing a high level of protection without compromising comfort or flexibility. A TPR palm slider ensures a controlled slide in case of an unfortunate mishap. The gloves can easily be put on thanks to the handy pull tab on the cuff and then secured with the hook-and-loop wrist strap. Adjusting your route during your journey is a breeze thanks to the integrated Connect Finger Tip which makes it possible to control your touchscreen device while leaving your gloves on. Enjoy the summer breeze with the Sand 4 gloves.

Features

Connect Finger Tip
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.

Grip panel at palm
This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.

Outside stitching
The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.

Pull tab
Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone

Regular cuff

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

Although the Sand 4 gloves have been designed to create a perfect match with the Sand 4 H2O outfit, these gloves are bound to become the go-to gloves for a large audience of adventure riders across the globe. This pair of hand protection has been specifically designed and engineered for summer use, providing optimal grip, breathability, and ventilation. To make sure your hands stay cool and dry during hot summer rides, the gloves are constructed of strong and abrasion-resistant mesh stretch fabrics combined with a high-tech TPR knuckle protector that is designed to direct the airflow into the glove and onto the hands of the rider. Multiple perforation holes on the outside and inside increase the breathability even more. For additional protection, we added TPR protectors on the fingers and thumbs; providing a high level of protection without compromising comfort or flexibility. A TPR palm slider ensures a controlled slide in case of an unfortunate mishap. The gloves can easily be put on thanks to the handy pull tab on the cuff and then secured with the hook-and-loop wrist strap. Adjusting your route during your journey is a breeze thanks to the integrated Connect Finger Tip which makes it possible to control your touchscreen device while leaving your gloves on. Enjoy the summer breeze with the Sand 4 gloves.

Features

Connect Finger Tip
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.

Grip panel at palm
This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.

Outside stitching
The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.

Pull tab
Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone

Regular cuff

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

For many years, the Sand outfit has been the go-to choice for female riders looking for a rugged and versatile jacket and pants combination that is fully prepared to take on any challenging adventure on or off-road. Hot, wet, or cold weather will not stop you from reaching your destination, wherever the road may lead you. The Sand 4 H2O Ladies is the ultimate women’s adventure riding jacket. The tough yet lightweight, abrasion-resistant outer shell is engineered to last a multitude of around-the-world trips and is designed to provide excellent freedom of movement for the most demanding and technical riding situations. For maximum impact protection, the Sand 4 H2O Ladies includes our award-winning, industry-leading SEEFLEX™ CE-level 2 protectors at the shoulders and elbows. It also comes prepared for the optional and equally impressive SEESOFT™ CE-level 2 insert back protector. You’re ready to tackle any challenge with this jacket. When we say the Sand 4 H2O Ladies jacket is versatile, we mean that it is prepared for any climate you might encounter, and that it allows you to configurate it in the best possible way to ensure maximum comfort. Every layer is removable and separately wearable, from the waterproof hydratex® membrane to the insulated winter lining. Changing seasons or weather conditions won’t deter you from getting on your bike, you’re ready for it all. Multiple adjustment straps and tabs on the arms, and variable height adjustment straps at the waist will ensure the perfect fit to your body with or without the liners installed. If you are looking for airflow, this jacket has plenty of options that allow you to regulate the amount of wind that blows towards your body. The main front zipper can be zipped open to reveal a mesh ventilation panel that enables cool air to travel into the jacket. At the front, we have 2 ventilation panels which can be held open by a special tab connected to a press button on the outside of the jacket. With all 3 front ventilation panels open, in combination with the 2 rear-vent zippers, they will create an incredible amount of airflow through the entire jacket. Combined with the multiple ventilation zippers running across the arms, this jacket will keep you cool and comfortable in higher temperatures. The 2 front pockets, big rear pocket and 2 inner pockets provide ample storage space so you can bring all your essentials along for the ride, and keep them close. The back pocket is even large enough to store the liners when not in use. All the outside pockets can be closed with zippers to make sure you will not lose your valuable possessions during the ride. Durable, versatile and practical. The highest specifications regarding tear, cut and abrasion resistance and top-notch impact armor. The Sand 4 H2O Ladies jacket has it all and is ready for your next ride around the world.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

Although the Sand 4 Ladies gloves have been designed to create a perfect match with the Sand 4 H2O Ladies outfit, these gloves are bound to become the go-to gloves for a large audience of female adventure riders across the globe. These are not just smaller versions of the men’s model, but have been specifically designed using our female-specific fit glove pattern. These gloves have been specifically designed and engineered for summer use, providing optimal grip, breathability, and ventilation. To make sure your hands stay cool and dry during hot summer rides, the gloves are constructed of strong and abrasion-resistant mesh stretch fabrics combined with a high-tech TPR knuckle protector that is designed to direct the airflow into the glove and onto the hands of the rider. Multiple perforation holes on the outside and inside increase the breathability even more. For additional protection, we added TPR protectors on the fingers and thumbs; providing a high level of protection without compromising on comfort or flexibility. A TPR palm slider ensures a controlled slide in case of an unfortunate mishap. The gloves can easily be put on thanks to the handy pull tab on the cuff and then secured with the hook-and-loop wrist strap. Adjusting your route during your journey is a breeze thanks to the integrated Connect Finger Tip which makes it possible to control your touchscreen device while leaving your gloves on. Enjoy the summer breeze with the Sand 4 Ladies gloves.

Features

Connect Finger Tip
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.

Grip panel at palm
This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.

Outside stitching
The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.

Pull tab
Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone

Regular cuff

Versatile all-season jacket for adventure riding

Adventure will take you wherever it may, but you still want to feel in control, even on unknown roads and through uncharted terrains. That’s why your motorcycle jacket should be a versatile companion – making your every mile safe, comfortable, and composed. So, if you’re looking for an all-season all-rounder, the Offtrack 2 H2O’s for you. Now you’re dressed to be in control of every adventure. Versatile line-up Confidence-inspiring design puts the focus on your unfolding adventure. When it’s hot out in the wild, well-proportioned VCS|Aquadefence panels increase airflow, while zippers on the forearms and back ventilate your upper body. Should the temperature drop, just zip the detachable thermal liner into the PWR|Shell, PWR|Ripstop outer. And in adverse weather, switch to the hydratex liner to stay dry. The thermal liner & removable waterproof liner are both separate wearable stand-alone jackets. The waterproof liner is also wearable over the top of the outer shell jacket, making the 100% waterproof WL the outermost layer for extreme wet weather conditions. One jacket, three modes; all the versatility. Explore safe Knowing your jacket is keeping you safe helps you enjoy the thrill of adventure riding – that’s the thinking behind the Offtrack H2O jacket. It’s also why it’s equipped with SEEFLEX CE-rated protection at the shoulders and elbows, plus the option of SEESOFT protectors for your back and chest.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

Versatile all-season pants for adventure riding.

You might be venturing into the unknown, but one thing’s for sure – you’ll need the right pants. And the Offtrack 2 H20 pants give you all-round comfort, wherever adventure takes you. Lightweight and versatile like their matching jacket, the zip-in thermal and waterproof liners equip you for unpredictable conditions, while SEEFLEX and SEESOFT CE-rated armor protects your knees and hips. Ready, steady, H2O VCS|Aquadefence gives you ventilation on demand. Open the panels for airflow or snap them shut using FidLock® magnetic fasteners combining locking strength with easy, one-handed operation. When closed, a clever rain gutter repels every drop of water. Plus, for full-body coverage on the longest and wettest of rides, short and long zippers will attach to any compatible REV’IT! Jacket – the obvious option being the Jacket Outback 2 H2O for the complete Outback look. Materials in the mix Different day, same pants – all thanks to ingenious textiles. The outer shell is form-fitting, long-lasting, wax-coated, 600-denier polyester, cowhide guards your inner-knee contact points, and stretch panels accommodate your different riding positions. Two cargo pockets on the upper legs provide ample capacity with easy access, while reflective elements add eye-catching details to the front, sides, and rear.

Ventilated leather gloves for tactile summer touring

The Offtrack 2 gloves live for the summer and love the breeze as the season varies. Primed for hot, humid weather, these gloves offer extreme levels of ventilation with a lightweight feel. Engineered for versatility, even the knuckle protectors are dual purpose: to defend, and guide air into the body of the glove – everything you need to get into your flow. Strength through stretch In the summer, it’s your gloves that take the heat, so a mix of tactile materials ensure a ventilated construction that’s strong and snug in fit without being stifling thanks to PWR|Shell – a 500-denier polyester stretch renowned for its flexible, durable properties – around each finger, and TPU jacquard knit at the knuckles and cuffs – a knit that naturally breathes when you flex your fingers. Make some memories When adventure takes you off the beaten track, you know you’re in for a ride you won’t forget. The Offtrack 2 are with you all the way – plush, impact-absorbing memory foam is stitched into fingers, thumbs, and palms, it’s even under the polyurethane-injected knuckle protectors. Plus, when your hands are still buzzing near the end of a gnarly trail, a pull tab at the cuffs will let the air out as you finish your ride.

Ventilated leather gloves for tactile summer touring

The Offtrack 2 gloves live for the summer and love the breeze as the season varies. Primed for hot, humid weather, these gloves offer extreme levels of ventilation with a lightweight feel. Engineered for versatility, even the knuckle protectors are dual purpose: to defend, and guide air into the body of the glove – everything you need to get into your flow. Strength through stretch In the summer, it’s your gloves that take the heat, so a mix of tactile materials ensure a ventilated construction that’s strong and snug in fit without being stifling thanks to PWR|Shell – a 500-denier polyester stretch renowned for its flexible, durable properties – around each finger, and TPU jacquard knit at the knuckles and cuffs – a knit that naturally breathes when you flex your fingers. Make some memories When adventure takes you off the beaten track, you know you’re in for a ride you won’t forget. The Offtrack 2 are with you all the way – plush, impact-absorbing memory foam is stitched into fingers, thumbs, and palms, it’s even under the polyurethane-injected knuckle protectors. Plus, when your hands are still buzzing near the end of a gnarly trail, a pull tab at the cuffs will let the air out as you finish your ride.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Fully functional aesthetics never looked this good. With a design borrowing heavily from the outdoor scene, the CE-certified motorcycle-ready Blackwater 2 H2O smock is all about looking purposeful as much as being purposeful. Inherent to the smock jacket concept, you put it on over your head, which is made easy with the addition of a side-entrance zipper. Keeping the front clean, and fully weatherproof.

Function-focused, fit for purpose
Regardless of the basic, function-focused approach, the Blackwater 2 H2O advances the motorcycle smock jacket concept with laminated, waterproof hydratex material, beefed-up abrasion resistance with Cordura® ripstop, and PWR|Shell stretch ripstop to secure wearing comfort and stretch.

Ready for pure-blooded adventure
Although it’s looks make intentions clear – it’s a pure-blooded off-road adventure jacket – the Blackwater 2 H2O is packed with CE-level 1 SEESMART protective armor at shoulders and elbows, and there’s a pouch ready to add an optional CE-level 2 SEESOFT back protector, assuring you’re safe when adventures take you across tarmac. When it’s time for serious off-road adventuring, the Blackwater 2 H2O is designed to be worn over our Proteus protector jacket. Just remember to take the standard shoulder and elbow armor out first to keep things fitting safely and comfortably.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Fully functional aesthetics never looked this good. With a design borrowing heavily from the outdoor scene, the CE-certified motorcycle-ready Blackwater 2 H2O smock is all about looking purposeful as much as being purposeful. Inherent to the smock jacket concept, you put it on over your head, which is made easy with the addition of a side-entrance zipper. Keeping the front clean, and fully weatherproof.

Function-focused, fit for purpose
Regardless of the basic, function-focused approach, the Blackwater 2 H2O advances the motorcycle smock jacket concept with laminated, waterproof hydratex material, beefed-up abrasion resistance with Cordura® ripstop, and PWR|Shell stretch ripstop to secure wearing comfort and stretch.

Ready for pure-blooded adventure
Although it’s looks make intentions clear – it’s a pure-blooded off-road adventure jacket – the Blackwater 2 H2O is packed with CE-level 1 SEESMART protective armor at shoulders and elbows, and there’s a pouch ready to add an optional CE-level 2 SEESOFT back protector, assuring you’re safe when adventures take you across tarmac. When it’s time for serious off-road adventuring, the Blackwater 2 H2O is designed to be worn over our Proteus protector jacket. Just remember to take the standard shoulder and elbow armor out first to keep things fitting safely and comfortably.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, waterproof, lightweight, comfortable, active fit off-road.

The evolution of a DIRT Series modern classic, the Component 2 H2O builds upon this pinnacle adventure jacket’s well-received, feature-driven design approach by making the stand-out details even better and adding another few for good measure.

Form and function in fashionable harmony
Inspired by designs used throughout the outdoor segment, it’s very much form and function in fashionable harmony. Not to say it’s a compromise – more the exact opposite. Its strategically matched, abrasion resistant Cordura® ripstop and PWR|Shell stretch ripstop materials give a hard-wearing, durable look to the Component 2 H2O’s actual tactical and lightweight characteristics. With 100% wind and waterproof, laminated hydratex, CE-level 1 SEESMART armor, and an added pouch to upgrade things with a CE-level 2 SEESOFT back protector, the Component 2 H2O pulls out all the stops.

Get your adventure on
With its removable hood, comfort-boosting neoprene collar, and ample ventilation, the Component 2 H2O is very much ready to hit the road. There’s still everything you need to take to the roads less traveled – or just leave the road altogether. Its active fit adds a casual, outdoor lifestyle feel, while the comfortably sizing has been primarily designed to slip over our Proteus protector jacket for when you’re really looking to get your adventure on.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, waterproof, lightweight, comfortable, active fit off-road.

The evolution of a DIRT Series modern classic, the Component 2 H2O builds upon this pinnacle adventure jacket’s well-received, feature-driven design approach by making the stand-out details even better and adding another few for good measure.

Form and function in fashionable harmony
Inspired by designs used throughout the outdoor segment, it’s very much form and function in fashionable harmony. Not to say it’s a compromise – more the exact opposite. Its strategically matched, abrasion resistant Cordura® ripstop and PWR|Shell stretch ripstop materials give a hard-wearing, durable look to the Component 2 H2O’s actual tactical and lightweight characteristics. With 100% wind and waterproof, laminated hydratex, CE-level 1 SEESMART armor, and an added pouch to upgrade things with a CE-level 2 SEESOFT back protector, the Component 2 H2O pulls out all the stops.

Get your adventure on
With its removable hood, comfort-boosting neoprene collar, and ample ventilation, the Component 2 H2O is very much ready to hit the road. There’s still everything you need to take to the roads less traveled – or just leave the road altogether. Its active fit adds a casual, outdoor lifestyle feel, while the comfortably sizing has been primarily designed to slip over our Proteus protector jacket for when you’re really looking to get your adventure on.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, waterproof, knee brace-ready, lightweight off-road pants

Take on any adventure in any weather with our CE-certified and waterproof, active fit, over-the-boot Component H2O hard shell pants. The outer shell is made of the rugged abrasion-resistant CORDURA® ripstop fabric laminated with our waterproof hydratex® membrane. PWR|Shell Ripstop stretch is used on the inside of the legs and upper knees for maximum flexibility and comfort. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle. A removable thermal liner will keep the rider comfortable and warm in lower temperatures. Protection is provided by our removable SEESMART™ CE-level 1 protectors at the hips and knees. Furthermore, the knee construction is designed to work with knee braces or our Scram knee protector sock – with the SEESMART™ protectors first removed, of course. For convenience purposes, the upper legs are equipped with cargo pockets as well as waterproof ventilation zippers to cool the rider down in warm weather. To get the right fit every time, we have equipped these pants with a ratchet waist closure, along with a silicon waistband to keep the pants from sliding down. Adjustment tabs on the calves provide plenty of adjustability to complement any type of motorcycle boots. A grip patch will ensure that the rider will not slide off the seat when it is wet or dry. Additionally, the lower legs are equipped with a special gator that goes over the boot to block out water and mud. Ride long and far with the Component H2O pants.

Short-cuffed, lightweight and ventilated adventure riding gloves with hard knuckle

For serious touring and adventure riders

Loaded with safety technology

Perfect balance of protection and ventilation

Connect Finger Tip for touchscreen operation

Our Dirt 3 gloves have been created to meet the serious demands of touring and adventure riders across the globe. We’ve made sure they combine the ideal balance of protection and ventilation, whether you’re on or off-road. In terms of protection, these gloves keep hands well armored thanks to the inclusion of a TPR hard shell knuckle, a TPR palm slider, TPR finger knuckles, PWR|shield knit at the palm, Temperfoam® finger knuckles, a Temperfoam® thumb knuckle and Temperfoam® underneath the knuckle. Furthermore, ventialtion panels are found at the fingers, thumb and back of the hand. To keep things functional, we’ve included the Connect Finger Tip, a feature that allows riders to operate touchscreens (GPS, smartphones, etc.) without the inconvenience of taking the gloves off. And to make sure you have the perfect fit, the adjustment tab at the cuff is there for your comfort and convenience.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Ventilated, top-spec gloves for touring and adventure riders

Gloves for women who want to ride far!

For touring and off-road adventures

Right balance of protection & ventilation

Designed with a female specific fit 

The Dirt 3 Ladies gloves meet the demands of many serious female touring and adventure riders across the globe, offering an optimal balance between protection and ventilation. Your hands will be well armored thanks to the TPR knuckle, TPR palm slider, and TPR finger knuckles. The incorporated Connect Finger Tip allows for the operation of touchscreen devices without removing the glove, making this adventure-ready package complete. Venture further knowing your hands are protected.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, In-boot, off-road, lightweight, flexible riding pants

Meet the Peninsula. A purpose-built pair of active fit pants for riders who prefer to wear their gear tucked inside their boots instead of over them – as part of our DIRT Series collection. The CE-certified pants are constructed of highly abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch on the inside legs, lower legs, and upper knees. This allows for maximum movement and comfort. Our flexible, lightweight, and removable SEESMART™ CE-level 1 protectors are featured at the hips and knees. And when the SEESMART™ armour is removed from the knees, the pants can be worn over our CE-level 2 Scram knee protectors. The Peninsula is also patterned to accommodate aftermarket knee braces underneath. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle while optimal fit is ensured by the ratchet waist closure while the silicon waistband will keep the pants from sliding down. In warmer temperatures, the long ventilation zippers can be zipped open to cool down the rider. And in terms of keeping your essentials close by, storage is provided by cargo pockets at the upper legs.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, In-boot, off-road, lightweight, flexible riding pants

Meet the Peninsula. A purpose-built pair of active fit pants for riders who prefer to wear their gear tucked inside their boots instead of over them – as part of our DIRT Series collection. The CE-certified pants are constructed of highly abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch on the inside legs, lower legs, and upper knees. This allows for maximum movement and comfort. Our flexible, lightweight, and removable SEESMART™ CE-level 1 protectors are featured at the hips and knees. And when the SEESMART™ armour is removed from the knees, the pants can be worn over our CE-level 2 Scram knee protectors. The Peninsula is also patterned to accommodate aftermarket knee braces underneath. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle while optimal fit is ensured by the ratchet waist closure while the silicon waistband will keep the pants from sliding down. In warmer temperatures, the long ventilation zippers can be zipped open to cool down the rider. And in terms of keeping your essentials close by, storage is provided by cargo pockets at the upper legs.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, In-boot, off-road, lightweight, flexible riding pants

Meet the Peninsula. A purpose-built pair of active fit pants for riders who prefer to wear their gear tucked inside their boots instead of over them – as part of our DIRT Series collection. The CE-certified pants are constructed of highly abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch on the inside legs, lower legs, and upper knees. This allows for maximum movement and comfort. Our flexible, lightweight, and removable SEESMART™ CE-level 1 protectors are featured at the hips and knees. And when the SEESMART™ armour is removed from the knees, the pants can be worn over our CE-level 2 Scram knee protectors. The Peninsula is also patterned to accommodate aftermarket knee braces underneath. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle while optimal fit is ensured by the ratchet waist closure while the silicon waistband will keep the pants from sliding down. In warmer temperatures, the long ventilation zippers can be zipped open to cool down the rider. And in terms of keeping your essentials close by, storage is provided by cargo pockets at the upper legs.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, short-cuffed, lightweight, ventilated off-road/MX gloves

Take the short-cuffed, DIRT Series, Massif gloves out with you on your next off-road adventure and enjoy the comfort and freedom of this pair snug-fitting hand protection. Ideal for warmer weather, the rider’s hands remain cool thanks to a constant flow of cool air streaming through the PWR|Stretch mesh material on the upper side of the gloves. These CE-certified and well-ventilated gloves are also equipped with a neoprene cuff; making sure that no sand or water will enter during a ride on the trails. In the armor department, the Massif gloves have flexible TPR knuckle protector shields the knuckles and fingers. Giving riders the grip they’re after comes from the included Clarino fabric, which ensures a strong hold on the handlebars.

Adjustability

• Stretch at fingers
• Stretch at thumb
• Stretch fabric on back of hand

Closure

• Hook-and-loop closure
• Wrist strap

Lining:No liner

Features

• Grip patch at the palm
• A grip patch is made with a texturized pattern to deliver a superb grip performance.
• Pull tab: fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
• Short cuff

Protection

• EVA foam palm slider
• No knuckle
• PWR|Shield at palm: PWR|Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance levels.
• Temperfoam® thumb knuckle

Outer shell material

• Clarino®
• Neoprene: Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
• PWR|Stretch mesh

CERTIFICATION

• These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 rating.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, short-cuffed, lightweight, ventilated off-road/MX gloves

Take the short-cuffed, DIRT Series, Massif gloves out with you on your next off-road adventure and enjoy the comfort and freedom of this pair snug-fitting hand protection. Ideal for warmer weather, the rider’s hands remain cool thanks to a constant flow of cool air streaming through the PWR|Stretch mesh material on the upper side of the gloves. These CE-certified and well-ventilated gloves are also equipped with a neoprene cuff; making sure that no sand or water will enter during a ride on the trails. In the armor department, the Massif gloves have flexible TPR knuckle protector shields the knuckles and fingers. Giving riders the grip they’re after comes from the included Clarino fabric, which ensures a strong hold on the handlebars.

Adjustability

• Stretch at fingers
• Stretch at thumb
• Stretch fabric on back of hand

Closure

• Hook-and-loop closure
• Wrist strap

Lining:No liner

Features

• Grip patch at the palm
• A grip patch is made with a texturized pattern to deliver a superb grip performance.
• Pull tab: fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
• Short cuff

Protection

• EVA foam palm slider
• No knuckle
• PWR|Shield at palm: PWR|Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance levels.
• Temperfoam® thumb knuckle

Outer shell material

• Clarino®
• Neoprene: Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
• PWR|Stretch mesh

CERTIFICATION

• These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 rating.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

CE-certified, ventilated, mesh off-road/MX jacket

 NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, Windbreaking, softshell, off-road riding jacket with removable sleeves

The Continent WB jacket is a tactical, high-tech, adventure-ready jacket as part of our DIRT Series, but there’s much more to it than meets the eye. Engineered with serious adventure riding in mind, the Continent WB is made to adapt as conditions change.

For when the going gets rough
Designed and certified to be good to go, with SEESMART protection in charge of keeping your elbows and shoulders out of harm’s way and an insert pocket for a SEESOFT back protector, there’s also the possibility of removing the standard protection and slipping the Continent WB jacket over our CE-level 1 and Level 2 certified Proteus protector jacket for when the going gets rough.

Purposeful beyond looks and feel
Similarly, the full-stretch, softshell design looks and feels purposeful, but that’s before unzipping the sleeves for even more riding mobility and ventilation. Because the Continent WB is very much an in-between jacket, the removable sleeves are mated to the shoulders, as a comfortable double layer up top that comes off altogether, turning this mid-range temperature jacket into a full-blown, body-warming off-road riding vest in a matter of moments.

COMFORT FEATURES
Adjustability:
Adjustment drawcord at hem
Adjustment tab at cuffs
Pockets:
Inner pocket
Slit pocket at back
Two slit pockets on front
Features:
Detachable sleeves
Elastic key cord in pocket

CLIMATE FEATURES
Ventilation:
Perforation on upper front

PROTECTION FEATURES
Protection:
Prepared for SEESOFT™ CE-level 2 Insert Back Protector
SEESMART CE-level 1 Elbow Protectors
SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
CORDURA® 750D ripstop
Visibility:
Laminated reflection at upper arms
Laminated reflection on back
Laminated reflective logo on back

CERTIFICATION
This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating. For more details about certification click here.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

 NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, Windbreaking, softshell, off-road riding jacket with removable sleeves

The Continent WB jacket is a tactical, high-tech, adventure-ready jacket as part of our DIRT Series, but there’s much more to it than meets the eye. Engineered with serious adventure riding in mind, the Continent WB is made to adapt as conditions change.

For when the going gets rough
Designed and certified to be good to go, with SEESMART protection in charge of keeping your elbows and shoulders out of harm’s way and an insert pocket for a SEESOFT back protector, there’s also the possibility of removing the standard protection and slipping the Continent WB jacket over our CE-level 1 and Level 2 certified Proteus protector jacket for when the going gets rough.

Purposeful beyond looks and feel
Similarly, the full-stretch, softshell design looks and feels purposeful, but that’s before unzipping the sleeves for even more riding mobility and ventilation. Because the Continent WB is very much an in-between jacket, the removable sleeves are mated to the shoulders, as a comfortable double layer up top that comes off altogether, turning this mid-range temperature jacket into a full-blown, body-warming off-road riding vest in a matter of moments.

COMFORT FEATURES
Adjustability:
Adjustment drawcord at hem
Adjustment tab at cuffs
Pockets:
Inner pocket
Slit pocket at back
Two slit pockets on front
Features:
Detachable sleeves
Elastic key cord in pocket

CLIMATE FEATURES
Ventilation:
Perforation on upper front

PROTECTION FEATURES
Protection:
Prepared for SEESOFT™ CE-level 2 Insert Back Protector
SEESMART CE-level 1 Elbow Protectors
SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
CORDURA® 750D ripstop
Visibility:
Laminated reflection at upper arms
Laminated reflection on back
Laminated reflective logo on back

CERTIFICATION
This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating. For more details about certification click here.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, over-boot, off-road, lightweight, flexible riding pants

Enjoy endless off-road exploration on two wheels with our CE-certified and splash proof, active fit over-the-boot Continent hard shell pants – as part of our DIRT Series collection. On the inside of the legs and upper knees, the Continent has been engineered with the rugged abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch for maximum flexibility and comfort. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle. Protection is provided by our removable SEESMART™ CE-level 1 protectors at the hips and knees. Furthermore, the knee construction is designed to work with knee braces or our Scram knee protectors – with the SEESMART™ protectors first removed, of course. For convenience purposes, the upper legs are equipped with cargo pockets for added storage options, and ventilation zippers to cool the rider down. For the right fit, we’ve included a ratchet waist closure, along with a silicon waistband to keep the pants from sliding down. Additionally, the lower legs are equipped with a special gator that goes over the boot to block out water and mud.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, over-boot, off-road, lightweight, flexible riding pants

Enjoy endless off-road exploration on two wheels with our CE-certified and splash proof, active fit over-the-boot Continent hard shell pants – as part of our DIRT Series collection. On the inside of the legs and upper knees, the Continent has been engineered with the rugged abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch for maximum flexibility and comfort. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle. Protection is provided by our removable SEESMART™ CE-level 1 protectors at the hips and knees. Furthermore, the knee construction is designed to work with knee braces or our Scram knee protectors – with the SEESMART™ protectors first removed, of course. For convenience purposes, the upper legs are equipped with cargo pockets for added storage options, and ventilation zippers to cool the rider down. For the right fit, we’ve included a ratchet waist closure, along with a silicon waistband to keep the pants from sliding down. Additionally, the lower legs are equipped with a special gator that goes over the boot to block out water and mud.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, leather/textile mix, ventilated off-road gloves

The Caliber gloves (as part of the DIRT Series collection) feel perfectly at home on or off-road. Why? Because this snug-fitting pair of hand protectors combine the best of both leather and mesh. In order to keep your hands safe, these CE-certified gloves incorporate PWR|Shield fabric at the palm for maximum abrasion resistance. The top of the gloves are constructed with well-ventilated PWR|Stretch mesh and flexible TPR protection is found on the fingers and knuckles. This combination – along with stretch in all the right places - provides optimal freedom of movement and the armor necessary to keep your hands safe whether riding on the asphalt or exploring off the beaten path. Additionally, the comfortable neoprene cuff will keep dust and water out of the gloves.

Adjustability

• Stretch at fingers
• Stretch at thumb
• Stretch fabric on back of hand

Closure

• Hook-and-loop closure
• Wrist strap

Lining

• Tri-fleece liner: This polyester tricot fabric is used for glove lining, and brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp.

Features

• Connect Finger Tip: Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
• Grip patch at palm: A grip patch is made with a texturized pattern to deliver a superb grip performance.
• Outside stitching: The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.
• Pull tab: Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
• Regular cuff

• Ventilation: Ventilation holes

Protection

• Injected ventilated flex knuckle: This knuckle protection is injected in the upper material which makes it very flexible and abrasion resistant. Due to its structure it ventilates very well while keeping you safe.
• Outseam stitching by Guterman: Marketing calls it PWR yarn
• PWR|Shield at palm: PWR|Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance levels. This product is equipped with PWR|Shield at the palm.
• Temperfoam® knuckle
• Temperfoam® palm slider
• Temperfoam® thumb knuckle
• TPR finger knuckles

Outer shell material

• Connect finger tip fabric: Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
• Corduroy
• Goatskin: Tanned leather made from goatskin is considered extremely durable, and is often used for gloves and other products that require a soft hide.
• Neoprene: Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
• PWR|Stretch mesh

Certification

• These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating. For more details about certification click here.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

The Toronto H2O motorcycle jacket is a technical, high-performance garment that enables you to blend into urban life seamlessly the moment you get off your motorcycle or scooter. You can wear this jacket over your everyday business attire and nobody will even notice you’re wearing protective motorcycle gear.

The Toronto H2O is made of a PWR|Shell 500D 2 and incorporates a hydratex|Mesh G-liner construction to make it waterproof. It also houses our proprietary, comfortable, lightweight, and ventilated SEESMART CE-level 1 armor at the elbows and shoulders. There’s also an insert to accommodate the additional SEESOFT CE-level 2 back protector in case you are looking for an upgrade.

You’ll find enough waterproof pockets to store everything you need on your daily commute, keeping those items important to you dry when the weather doesn’t want to cooperate. Furthermore, an adjustment zipper at the waist and tabs at the cuff make it possible to tailor the fit to your body. Laminated reflection on the back of the detachable hood is added for extra visibility. The full-sleeve detachable thermal liner will keep you warm during colder days but can be removed when it gets warmer outside. The thermal liner is also separately wearable and reversible – inside out, outside in.

Look great and stay dry with the Toronto H2O motorcycle jacket.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Waterproof hooded softshell jacket

The Afterburn H2O is the perfect example of a garment that mixes up the Sport and Urban vibe to become the perfect everyday riding motorcycle jacket. The hydratex®|mesh G-liner ensures a dry arrival at your destination, while a detachable thermal liner and ventilation zippers allow for climate control depending on the temperature. Our ultra-thin, yet motorcycle-ready CE-rated SEESMART™ armor comes standard at the shoulders and elbows, and the safety quotient can be upgraded by installing our CE-level 2 SEESOFT™ back protector insert. With two front pockets and an inner pocket, the Afterburn H2O motorcycle jacket allows you to keep your essentials close, and the incorporated connection zipper allows you to zip the motorcycle jacket into virtually any REV’IT! trousers, even our riding jeans when using our Safeway belt.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Waterproof hooded softshell jacket

The Afterburn H2O is the perfect example of a garment that mixes up the Sport and Urban vibe to become the perfect everyday riding motorcycle jacket. The hydratex®|mesh G-liner ensures a dry arrival at your destination, while a detachable thermal liner and ventilation zippers allow for climate control depending on the temperature. Our ultra-thin, yet motorcycle-ready CE-rated SEESMART™ armor comes standard at the shoulders and elbows, and the safety quotient can be upgraded by installing our CE-level 2 SEESOFT™ back protector insert. With two front pockets and an inner pocket, the Afterburn H2O motorcycle jacket allows you to keep your essentials close, and the incorporated connection zipper allows you to zip the motorcycle jacket into virtually any REV’IT! trousers, even our riding jeans when using our Safeway belt.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Meet the Afterburn H2O Ladies jacket. Created with a female-specific fit, this Sport-inspired Urban jacket has clean lines, a timeless look, and all the right safety components that help riders stay safe. SEESMART™ CE-rated armor comes standard at the elbows and shoulders, while there’s also an option to upgrade the safety element by adding REV'IT!'s CE-level 2 SEESOFT™ back protector insert. The hydratex®|mesh G-liner ensures a dry arrival at your destination while the climate control comes from the option to take out the thermal liner and open the ventilation zippers. Furthermore, the incorporated connection zipper makes sure you can fasten the Afterburn H2O Ladies jacket onto virtually any REV’IT! trousers, including riding jeans when using one of our Safeway belts. For added convenience and style, the Afterburn H2O Ladies comes with a detachable hood.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Stay casual while you ride with the Parabolica stretch jacket.

For many urban riders, comfort of moto gear ranks pretty highly on the requirements list. Something that allows for freedom of movement, looks great and has a good vibe to it. Well, that sums up the Parabolica motorcycle jacket nicely.

It comes with a clean yet angularly cut construction, handy front pockets, and a fixed hood (complete with a snap button to hold it down when riding). Furthermore, its stretch characteristics give you that flexibility you need in a sport bike fit garment.

Feel good – and look good - out on the road on any of your city rides with the Parabolica motorcycle jacket

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Graphic-oriented softshell jacket for urban sport riders

Product description
What better way to express yourself than through bold, graphic prints on your riding jacket That’s exactly what the Saros WB was created for. The same jacket with three different illustrative print choices allows you to be your best (and protected self) out on the road. Tech fashion in practice The hooded Saros WB jacket is meant to look more like veritable streetwear rather than PPE. The 3L softshell contributes to this dynamic. That said, it’s totally ready to take on the road thanks to the inclusion of inner SEESMART elbow and shoulder protection, along with a CE AA classification. Furthermore, WB stands for wind barrier. While the jacket itself is windproof - not waterproof – the inner membrane does help to prevent water pickup. Three ways to express your style Each Saros WB jacket comes with the same safety features but a different look to them. And instead of just changing up the colors, we offer them three different prints. There’s the non-traditional camo green variation, a tonal mélange grey, and one that has names of various places famous racetracks are in.

Comfort features
Pockets:
Inner pocket
Two stash pockets at front
Lining:
3D mesh
Mesh
Features:
Adjustment drawcord at hood
Button fixation for hood
Fixed hood
Jeans loop
Knitted cuff
Short connection zipper

Climate features
Insulation:
WindBarrier®
Wind catcher behind front zipper
Protection features

Protection:
Prepared for SEESOFT CE-level 2 Insert Back Protector
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
SEESMART CE-level 1 Elbow Protectors
SEESMART CE-level 1 Shoulder Protectors
Thumb loops
Outer shell material:
Softshell 3L
Visibility:
Laminated reflection at front
Laminated reflection on hood

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Sportswear-inspired, casual hoody for urban sport riders

Want to add a back protector to your hoody? Click here to determine which size you'll need and to add to your shopping cart.

Fuel’s “Rally 2” trail gloves are your perfect ride companions. They are made using 75% leather, mixed with other technical fabrics to achieve a comfortable and safe finish. 

The Rally 2 Gloves have been carefully designed and expertly crafted to cater to the needs of touring and adventure enthusiasts.

Tech specs:

• Outer shell: 75% Cowhide & suede leather, 25% Nylon Spandex
• Lining 100% polyester
• Integrated PVC knuckle armor
• CE Level 1 Certification
• Cuff with an accordion stretch panel for better comfort
• Palm of the hand perforated for better ventilation
• Finger touch screen
• Cuff with velcro to fasten

Introducing the Astrail Gloves, the ultimate addition to the Astrail Line of equipment for dual sport riders. These gloves are designed to provide maximum protection and comfort during your on and off-road adventures, making them an essential piece of equipment for any rider.

• Genuine leather palm construction
• Rubber protection in fingers
• Touchscreen compatible
• Nylon stretch
• Suede
• CE Certified

Introducing the Astrail Gloves, the ultimate addition to the Astrail Line of equipment for dual sport riders. These gloves are designed to provide maximum protection and comfort during your on and off-road adventures, making them an essential piece of equipment for any rider.

• Genuine leather palm construction
• Rubber protection in fingers
• Touchscreen compatible
• Nylon stretch
• Suede
• CE Certified

• Exclusive Cordura Cotton Outer 12oz With Water Repellent Finish
• 3-IN-1 Interchangeable WP and Thermal Liners
• High-Quality YKK® Zippers Used Throughout
• D3O® LP1 Shoulder And Elbow Protectors Pre-Fitted
• D3O® Viper Stealth Back Protector Pre-Fitted
• D3O® Chest Protectors Pre-Fitted
• CE EN17092 Level ‘AA'
• Two Large Front Cargo Waterproof Pockets
• One Large Rear Cargo Pocket
• Outer Bicep Stash Pocket
• Internal Storage Pockets
• Merlin-Branded Snap Studs
• Bicep, Forearm, Cuff, Waist And Hem Adjustment Points
• Large Mesh Panels For Improved Breathability
• Jacket-To-Jean Connecting Zipper (Short And Long Options)
• Sculpted Front Hem
• Zipped Hem Opening
• Euro Hoop Connecting Strap

Merlin Sayan D3O® Laminated Jacket
As part of the growing laminate range within the Explorer Collection, Sayan arrives as a timeless classic with leather overlays to the shoulders and elbows in a classic British four-pocket style. Designed and tested with adventure in mind, this is a lightweight, durable and versatile option for those looking to go that bit further. Five-piece D3O® is pre-fitted to the garment with pockets for additional chest protectors. Sayan is available in three colour options – black, khaki or olive green.

Materials

AquaSeal+ Waterproof and Breathable Laminated Tape Seamed Outer Shell
Leather Reinforcement Panels To Shoulders and Elbows
Antibacterial Inner Mesh Lining
YKK® Waterproof Zippers
Zip Out 125gsm Thermal Lining

Protection

D3O® LP1 Shoulder And Elbow Protectors Pre-Fitted
D3O® Viper Stealth Back Protector Pre-Fitted
D3O® Chest Protector Pockets
CE EN17092 Level ‘AA’

Pockets

Two Large Chest Cargo Pockets
Two Large Lower Cargo Pockets
Large Rear Cargo Pocket
Coin/Toll Pocket To Arm
Nelson Pocket Behind Storm Flap
Patch Pocket On Removable Thermal
One Zipped And One Snap Closure Pocket On Fixed Lining

Features

Neoprene Soft Trim Collar and Cuff Edges
Brushed Collar With Snap Stud Back Fold
Chest Vents, Bicep Vents and Rear Ventilation Points
Cuff, Forearm, Bicep, Hem and Waist Size Adjustment Points
Double Layer Front Storm Flap
Merlin Branded Metal Snap Studs
Short and Long YKK® Jacket-to-Jean Connecting Zippers

Caring for your Sayan jacket

To care for your jacket, remove all armour from the shoulders, elbows and back and also any removable inner liners. Use a lint-free brush or cloth to really get into any especially dirty areas, then hand-wash the jacket with a mild or diluted detergent in lukewarm water. Full care information can be found in the dedicated care guide here: Merlin Wash & Care.

Merlin Condor® Laminated Trouser

Perfectly matching with the Solitude and Sayan laminated jackets, the Condor trouser can connect up with the long or short zippers, and has the same high quality AquaSeal+ laminate outer shell. Adjustment points at the waist and calf help riders achieve a personalised fit, while YKK® waterproof zippers open to allow better airflow on those warm rides. A long length zipper with gusset features at the ankle to easily slide over bulkier adventure-style boots.

Materials

AquaSeal+ Waterproof and Breathable Laminated Tape Seamed Outer Shell
AquaSeal+ Waterproof and Breathable Reinforcement Panels
Leather Inside Calf Panel
Antibacterial Inner Mesh Lining
YKK® Waterproof Thigh Zippers
Zip Out 125gsm Thermal Lining
Elasticated Boot Seal To The Ankle

Protection

D3O® LP1 Knee And Hip Protectors Pre-Fitted
CE EN17092 Level ‘AA’

Pockets

Two Large Thigh Pockets

Features

Double Waist Snap With YKK® Fly Zipper
Two Velcro Waist Size Adjustment Points
Long Thigh Ventilation Point
Pre-Curved Knee For Better Riding Fit
Calf and Ankle Velcro Size Adjustment Points
Merlin Branded Metal Snap Studs
Short and Long YKK Jacket-to-Jean Connecting Zippers

Caring for your Condor Trousers
To care for your trousers, remove all armour and also any removable inner liners, if applicable. Use a lint-free brush or cloth to really get into any especially dirty areas, then hand-wash with a mild or diluted detergent in cool water. Full care information can be found in the dedicated care guide here: Merlin Wash & Care or in the product label.

The DMD Solo Rider brown leather jacket is a classic motorbike jacket suitable for every kind of bike.

This jacket is full of details including the quilted patches applied both on the shoulders and sleeves recalling the style of jackets used in motorbike races of the 1920s.

Not only does it look fantastic, the Solo Rider is a properly protective motorcycle jacket with homologation, certified CE AA (EN 17092-3:2020), and includes certified protectors in the shoulders and elbows with an option to purchase a back protector separately. 

Protection

• Protective and homologated motorcycle jacket
• CE certification: AA (EN 17092-3: 2020)
• Predisposition for certified protectors on shoulders and elbows (protectors included).
• Lightweight, ultra-flexible and ventilated protectors
• Predisposition for back protection (special pocket) (Back protector is NOT included but can be purchased separately here)

 Features

• Made of real leather. Color: Brown
• Stand up collar with press studs closure
• Front zip and press studs closure
• 4 press studs closure front pockets
• Quilted patches applied both on shoulders and sleeves
• Zip closure vest pocket
• Zip closure and press studs closure at cuffs
• Vintage design inner lining
• Specialist dry clean only
• MADE IN ITALY

Since DMD jackets are made of genuine leather, any imperfections are not to be considered as defects, but as a peculiarity of the garment.

Model in the last image is 1.83 m wearing size L

Please consult the size chart. As with most Fuel items, these tend to fit on the small side. If you're in between sizes, better to select the larger size.