MOTORCYCLE PARTS

Suitable for use on all Liquid Cooled Triumph Bonneville 900 and 1200 cc Motors 2016 and up including:

• Triumph Bonneville T100
• Triumph Bonneville T120
• Street Twin
• Street Cup
• Street Scrambler
• Speed Twin
• Bobber
• Speedmaster
• Scrambler 1200 

VERSION 2.0 - INVESTMENT CAST STAINLESS STEEL

Big Fin Exhaust Clamps for LC Triumph Twins - Supplied here finished in Black with Polished fin outer edges! 

Inspired by the Webco finned cooling parts of the 1970s these are bolt on replacement for your stock clamps 

These fit all the 900 and 1200 cc Triumph Twins except the Thruxton/Speed Twin 1200 which have a link pipe on the stock headers at the exhaust port that gets in the way.

These fit 2016 and UP: Street Twin/Speed Twin 900, Street Cup, Street Scrambler, Speedmaster, Bobber, T100, T120

Street Tracker Seat  - Available here Black

Slim cut precision injection molded Base Design with slim style race cushion

THIS IS A FLAT TRACKER Style Seat for your Triumph Twin

Inspired by King Kenny Racing XS650 and the almighty Harley XR750 and far too much time leafing through the pages of Sideburn magazine - we have done a very limited edition production of these seats here.   Obviously, as a race-style seat you do not have the same amount of cushioning you would have with one of our regular seats like the Viper so please bear that in mind.

The seat works with all known configurations of tail tidies and rear mudguard setups including the stock ones however in our opinion for optimal looks it matches best with a short rear fender or a tail tidy such as the "Gort" as pictured. 

Injection molded ABS seat base - Gloss Black Automotive Paint

Injection-molded high-density polyurethane foam 

This Seat Fits 2016 and up : 

Street Twin / Street Cup / Street Scrambler / T100 / T120 / Speed Twin 900 (up to 2024) / Scrambler 900 

Please Note SPEED TWIN 900 2025+ has new chassis/frame so this seat wont fit (new version coming)

This Seat is specifically designed for the above frame and will not fit other frames (like the Speed Twin 1200 etc) - but if you nag us we might make a version for your bike as well.  

If you have an air-cooled Twin 2001-2015 due to the length of the frame we haven't found a way to make a seat this style look good without chopping the frame so please bear that in mind.

The BLACKADDER - Available here in Tobacco Brown

Slim cut low profile bench seat - the idea with this seat was to keep it as neat and trimmed back to the proportions of the frame as possible whilst maintaining optimal comfort - this stitch pattern is inspired by our ever popular Mamba Seat for the previous generation Bonnevilles - by popular request - now available for the liquid cooled bikes

Injection molded ABS seat base

Injection molded high density high comfort polyurethane foam 

This Seat Fits 2016 and up : 

Street Twin / Street Cup / Street Scrambler / T100 / T120 / Speed Twin 900 (up to 2024) / Scrambler 900 

Please Note SPEED TWIN 900 2025+ has new chassis/frame so this seat wont fit (new version coming)

If you have a bike that is earlier than 2016 check out the Mamba or the Krait instead 

If you have a Speed Twin 1200 Check out the Speed Diamond

The Viper - Available here in Rare Earth Light Brown

Slim cut low profile bench seat - the idea with this seat was to keep it as neat and trimmed back to the proportions of the frame as possible whilst maintaining optimal comfort

Injection molded ABS seat base

Injection molded high density high comfort polyurethane foam 

This Seat Fits 2016 and up : 

Street Twin / Street Cup / Street Scrambler / T100 / T120 / Speed Twin 900 (up to 2024) / Scrambler 900 

Please Note SPEED TWIN 900 2025+ has new chassis/frame so this seat wont fit (new version coming)

Note: while pictures of the seat shown on the Bike are of the version for the air-cooled Bonneville, the pictures are intended to give you an idea of what it would look like on your bike liquid-cooled Bonneville as this seat is intended for the liquid-cooled Bonnevilles mentioned above. 

The Viper - Dark Tobacco Brown

Slim cut low profile bench seat - the idea with this seat was to keep it as neat and trimmed back to the proportions of the frame as possible whilst maintaining optimal comfort

Injection molded ABS seat base

Injection molded high density high comfort polyurethane foam 

This Seat Fits 2016 and up : 

Street Twin / Street Cup / Street Scrambler / T100 / T120 / Speed Twin 900 (up to 2024) / Scrambler 900 

Please Note SPEED TWIN 900 2025+ has new chassis/frame so this seat wont fit (new version coming)

When the Triumph Bobber first came out the first thing I wanted to change was the seat. If only it was that simple. 3 or 4 years later - this is the result - for safety we made the pan out of 4mm thick Steel which made for some fairly hefty tooling. For comfort we made the foam using a high-density polyurethane injection moulded closed-cell foam. We have done a few different stitch patterns - this one we call the King Cobra. 

As the stock Triumph Street Twin is designed from the factory with a one piece Headlight and Speedo bracket assembly if you want to swap out the headlight brackets for something a little more subtle - or mount the light at a different orientation you'll also need a bracket to mount the speedo again.

We have seen other attempts at speedo brackets on the market, with various compromises - often cut from simple flat aluminium plate which will pick up the road vibrations causing at best inaccurate read outs at speed and at worst failing after a year or so of use.

The motone speedo bracket is structurally braced for strength as well as being manufactured using high pressure die casting.  There is no other aftermarket component supplier you will find using these kind of techniques to make parts for your Triumph. 

Deep Drawn from type 5052 Aluminium Sheet - the Motone Defender Sump Guard

Hand Brushed and then Anodised Black 

Designed and Built to Last - there is a lot of junk out there 

DEFENDER MKII Suitable for all years TRIUMPH BOBBER 1200 (Both the Bobber Black, Standard Bobber, Single Disc Bobber etc).

This part will not fit with factory forward controls therefore won't work with the Speedmaster 1200 which has forward controls on most common variants 

Motone Rad Guard for Wider Rads of the Liquid Cooled Triumph Bobber and Speedmaster only

Casing precision milled out of 6061T Billet Aluminium and then anodised a matte black.

Rear grill is laser cut out of steel and finished in a black powder coat.  

Full assembly comes ready to fit to your bike as a complete kit.

Motone Rad Guard for all Liquid Cooled Triumph Twins.

Casing precision milled out of 6061T Billet Aluminium and then anodised a matte black.

Rear grill is laser cut out of steel and finished in a black powder coat.  

Full assembly comes ready to fit to your bike as a complete kit. 

Good for all the liquid cooled bikes :

Street Twin, Street Cup, Street Scrambler, Thruxton, Thruxton R, Speed Twin 1200/RS, T100 LC, T120

Please note although this will fit the Bobber and the Speedmaster which have a slightly wider Rad there is also a specific wider version for those bikes - please see part KNS002

• Lathe Turned out of in BRASS
• Fitted with oil resistant O-Ring seal 

• Cast in Solid CZ122 Brass 
• CNC Machined thread
• Fitted with oil resistant O-Ring seal 
  
• Can be tightened by hand or with hex head

The Zephyr - Metal Intake Covers in Black Suitable for your T120 Motorcycle

Fits all years Triumph T120 from 2016 to Today

Formed out of High Pressure Die Cast Aluminium 

Sold as a Set with both Left and Right pieces included and finished in our signature wrinkle powder Black 

These are a bolt on piece and can be fit at home in minutes 

The Beltane Leather Battery Strap in Black Suitable for your LC TRIUMPH BOBBER or SPEEDMASTER Motorcycle

Fits all years LC Triumph BOBBER and SPEEDMASTER 1200

Premium Grade Leather - Stitched Back - Brass fittings and Stainless Clip

These are a bolt-on piece and can be fit at home in minutes 

Custom Ribbed side panels for Triumph Street Twin

High quality precision injection molded ABS.

Ribs aligned specifically with the fin angle on the stock cylinders

Aluminium mesh on panel indents  

GLOSS BLACK AUTOMOTIVE PAINT FINISH

Known to fit Street Cup and Street Twin 

Sold as a pair.

Custom Ribbed side panels for Triumph Bonneville Bobber / Speedmaster 1200

High quality precision injection molded ABS.

Ribs aligned specifically with the fin angle on the stock cylinders

Aluminium mesh on panel indents  

GLOSS BLACK AUTOMOTIVE PAINT FINISH

Sold as a pair.

The Zephyr - Metal Intake Covers in Black Suitable for your THRUXTON 1200 or TRIUMPH BOBBER Motorcycle

Fits all years Triumph THRUXTON 1200 (S/R/RS) and BOBBER and SPEEDMASTER 1200

Formed out of High-Pressure Die Cast Aluminium 

Sold as a Set with both Left and Right pieces included and finished in our signature wrinkle powder Black 

These are a bolt-on piece and can be fit at home in minutes 

This is Motone's new Kit for mounting the number plate onto the Side of your Bike

This specific version of the Kit is tailored to fit the liquid-cooled Triumph T100 / T120 / Street Twin / Street Cup / Street Scrambler 

It may well fit some other models (Speed Twin Eur4 /Thruxton Eur 4) but Motone need to do some experiments first and will update

Kit consists of the Sidewinder Lit Edition - an Eldorado Light in matching Krackle Black, and an extended Plug and Play Loom adapter

The Loom adapter is designed to work with Motone or aftermarket Indicators (i.e. they terminate in a 3.9mm Bullet connector) 

Designed Primarily for the Bobber/Speedmaster - will test and update for other models shortly

Motone have made 2 versions of this kit - this version includes a license plate light but no tail light. There is also a tail light version available that we can order for you if desired.

Kits Consists of

• Axle Plate Bracket - Forged Stainless Steel (MMU607)
• Side Mount Plate Mount Kit - Laser Cut Aluminium - Black Powder Coat (MMU604)
• The Pillbox - our E-Marked Street Legal Micro LED License Plate Light - 6061 Billet Aluminium and 120cm of wiring cable with 3.9mm bullet connector terminals 

The Number plate itself mounts to Axle Plate Bracket using counter sunk screws which are provided - the plate has counter sunk holes at various levels so you can set it at a suitable height for the size of your number plate on your bike. 

The Pillbox Light is designed to Plug and Play directly into any Motone rear wiring loom plug and play adapters

For Example this one DDM016 for the BOBBER/Speedmaster/Scramber 1200/Speed Twin 1200 Eur4 

Sold as a pair.  Made using the same technology as the original equipment manufacturing process, high pressure die cast.  

Suitable for any of the 1200 twins.

Fits :   T120, Thruxton R, Thruxton S, Bobber, Speedmaster

Sold here in Black finish

The covers come with 6 brass bolts similar to those found on the original monobloc Amal carbs, which were of course the inspiration for the look of the throttle body that Triumph has employed on these motors - fitment of the brass bolts is optional - you can also reuse your stock silver bolts. 

Sold as a pair.  Made using the same technology as the original equipment manufacturing process, high pressure die cast.  

Suitable for any of the 1200 twins.

Fits :   T120, Thruxton R, Thruxton S, Bobber, Speedmaster

Sold here in Black finish with Contrast Hand Polished Extremities 

The covers come with 6 brass bolts similar to those found on the original monobloc Amal carbs, which were of course the inspiration for the look of the throttle body that Triumph has employed on these motors - fitment of the brass bolts is optional - you can also reuse your stock silver bolts. 

Sold as a pair.  Made using the same technology as the original equipment manufacturing process, high-pressure die cast.  

Suitable for any of the 1200 twins.

Fits: T120, Thruxton R, Thruxton S, Bobber, Speedmaster, Scrambler 1200

Sold here in Black finish with Polished Fins! 

The covers come with 6 brass bolts similar to those found on the original monobloc Amal carbs, which were of course the inspiration for the look of the throttle body that Triumph has employed on these motors - fitment of the brass bolts is optional - you can also reuse your stock silver bolts. 

SOLID BRASS ENGINE BADGE - 2 Tone - BLACK and BRASS

Krackle Black and Polished Brass

This cover is for the ACG (What was once known as the "Points" Cover on the Vintage Meriden Triumphs) - The smaller of the two round engine covers. Clutch Side Badges/Covers are also available.

Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today

• Street Twin
• Street Cup
• Street Scrambler
• Scrambler 1200
• Bonneville Bobber
• T100
• T120
• Thruxton
• Speedmaster
• Speed Twin

SOLID BRASS ENGINE BADGE - 2Tone Brass & Black Finish : Krackle Black with Polished Brass Top Face

This cover is for the CLUTCH side (the larger round badge on the left hand side of the bike)

Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today

• Street Twin
• Street Cup
• Street Scrambler
• Scrambler 1200
• Bonneville Bobber
• T100
• T120
• Thruxton
• Speedmaster
• Speed Twin

Motone Quality - HIGH PRESSURE PRECISION DIE CAST

This cover is for the ACG (What was once known as the "Points" Cover on the Vintage Meriden Triumphs) - The smaller of the two round engine covers.  Clutch Side Badges/Covers are also available. 

Wrinkle Black Paint with Contrast Mirror Polished Outer Surface 

Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today: Street Twin, Street Cup, Street Scrambler, Scrambler 1200, Bonneville Bobber, T100 , T120, Thruxton, Speedmaster, Speed Twin