Riding Gear

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell sizes: 2 (XS-M | L-XXL)
• PC Lexan Shield
• Prepared for the use of Raleri Anti-Fog system
• Double-D ring buckle
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin Wind stopper (optional accessory; not included)
• Peak included
• Chin Ventilation

SPECIFICATIONS

• Weight: 1350 grs +/- 50 grs
• Shell sizes: 2 (XS-M | L-XXL)
• Homologation: ECE/22-05, DOT e NBR-7471:2001

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Developed for the rider looking for durability and quality with a hint of heritage look and feel.

 The Portland motorcycle shoes are high-quality leather boots with a sturdy appearance. They pair perfectly with your protective riding jeans and a leather jacket yet don’t take away from your fashionable looks when walking the streets. These shoes take you back to the future; combining styling from the past (archetype inspired “worker boots”) with tomorrow’s protection.

Hand-stitched details and a small reflective piece at the heel show that traditional styling and modern details go hand-in-hand when creating your next favorite pair of shoes. And to make them ride-ready, we’ve included a leather shift pad when you’re taking on the urban jungle.

Reinforced heel and toe cups and thermoformed cups on both sides of the ankle ensure armor is incorporated invisibly to offer protection that is up to the CE requirements. A true boot in appearance, the Portland are as tough as Urban motorcycle shoes get without becoming uncomfortable thanks to the OrthoLite® insole.

The Portland motorcycle shoes tick all the boxes if you’re looking for an understated look with premium protection and functionality in disguise

A stunning pattern inspired by indigenous peoples.

Keep wind and road debris off your face and look good doing it with Age of Glory neck tubes/gaiters.

• 100% Polyester
• Stretch and soft touch

We wanted to offer a pair of leather gloves with a different look, a little more radical, with a racing style but keeping in mind, that it would be worn on the daily. The gloves needed to have character and be original but meet certification standards. It was a tough challenge to face, but we’re happy with the result and we think you'll agree.

The Details:

• Leather outer
• Wrist straps for adjustment
• Palm & sides reinforced
• Rubber pad on palm
• CE certified gloves (EN13594:2015 norm)

Goldtop England's '76 Cafe Racer leather motorcycle jacket is quite simply, a timeless piece of café racer riding apparel! Based upon the original Goldtop 1976 Scuftuf design, this jacket comes hand-waxed, racing green aniline cowhide, with tan suede trim throughout, and Stainless Steel buckles & poppers. This jacket has comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for an optional back protector.

Available in sizes 38" to 52", and as these are hand-waxed jackets, the colour may vary slightly from jacket to jacket! Note: sizes 50 and 52 are special order and as such carry an additional $100 charge already included in the price shown as compared to standard sizes.

PRODUCT INFO

• CE "AAA" Approved Protective Garment to EN 17092:2020
• 1.4mm thickness aniline cowhide leather
• CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
• Optional Knox Micro-lock Compact back protector can be purchased here
• Quilted panels on both the shoulders and elbows
• Industrial grade hand-polished centre zip with AERO pull
• Trademark Goldtop champagne quilted lining
• 2 Zipped external pockets and
• 2 Interior chest pockets
• Adjustable cuffs with ball zips
• Stainless Steel adjustable waist buckles and collar snap
• Suede leather trim inside collar, cuffs and zip guard
• Dropped back

• 100% Ultra-fine Merino Wool
• For patterned variants, mouthpiece made from 73% Cotton, 23% Polyamide, 4% Elastane
• Designed for wearing underneath helmet
• Two sizes available - measure around head to gauge fit - most men will need Large
• Can be worn as either full balaclava or just neck tube / snood

• 73% Cotton, 23% Polyamide, 4% Elastane
• Double tubed with ultra-fine stitching along each checker for enhanced shape retention & fit when worn over face
• 2-Way stretch across the width for perfect grip and fit
• Measure around head to gauge fit - most men will require size Large
• Made in England

• 73% Cotton, 23% Polyamide, 4% Elastane
• Double tubed with ultra-fine stitching along each checker for enhanced shape retention & fit when worn over face
• 2-Way stretch across the width for perfect grip and fit
• Measure around head to gauge fit - most men will require size Large
• Made in England

Made of full-grain goatskin leather, the Helstons Kustom gloves have unique designs printed on the back of each colour of gloves. Typical of the world of motorcycling and tattooing, these flexible gloves are very comfortable thanks to the stretch fabric inserts as well as perforated leather between the fingers. Available in 3 colours: black, beige and gold, each model has its own silkscreen design. Helstons has opted for thinner, lighter-weight materials for this short-cuff glove, perfect for Summer.

Details:

• Goat leather
• Short cuff
• Stretch fabric between the fingers
• Integrated touch function on the index finger
• Waterproof and breathable membrane
• Palm reinforced with aramid fibers for abrasion resistance
• Hook & loop wrist closure 
• Product tested and compliant with the CE level 1 standard

Bell Bullitt Flat Face Shield

The DMD Solo Rider brown leather jacket is a classic motorbike jacket suitable for every kind of bike.

This jacket is full of details including the quilted patches applied both on the shoulders and sleeves recalling the style of jackets used in motorbike races of the 1920s.

Not only does it look fantastic, the Solo Rider is a properly protective motorcycle jacket with homologation, certified CE AA (EN 17092-3:2020), and includes certified protectors in the shoulders and elbows with an option to purchase a back protector separately. 

Protection

• Protective and homologated motorcycle jacket
• CE certification: AA (EN 17092-3: 2020)
• Predisposition for certified protectors on shoulders and elbows (protectors included).
• Lightweight, ultra-flexible and ventilated protectors
• Predisposition for back protection (special pocket) (Back protector is NOT included but can be purchased separately here)

 Features

• Made of real leather. Color: Brown
• Stand up collar with press studs closure
• Front zip and press studs closure
• 4 press studs closure front pockets
• Quilted patches applied both on shoulders and sleeves
• Zip closure vest pocket
• Zip closure and press studs closure at cuffs
• Vintage design inner lining
• Specialist dry clean only
• MADE IN ITALY

Since DMD jackets are made of genuine leather, any imperfections are not to be considered as defects, but as a peculiarity of the garment.

Model in the last image is 1.83 m wearing size L

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

The Dominator 3 GTX gloves were developed for around-the-world riding. They’re perfectly suited for all weather types you may encounter out on or off-road. That’s because of the use of GORE-TEX with Gore grip technology, making sure your hands stay warmer when it's cold and drier when you perspire.

The outer shell is made from various leather types, all chosen on the levels of safety and comfort they provide. Beside the TPU hard shell protectors on the thumb, fingers, and palm, these gloves are equipped with dual comp protectors that have been perforated to allow airflow to enter the gloves, keeping your hands cool and comfortable.

Whether you’re caught in the rain, in the desert heat, or anything in between, the Dominator 3 GTX gloves have your hands covered.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, short-cuffed, lightweight, ventilated off-road/MX gloves

Take the short-cuffed, DIRT Series, Massif gloves out with you on your next off-road adventure and enjoy the comfort and freedom of this pair snug-fitting hand protection. Ideal for warmer weather, the rider’s hands remain cool thanks to a constant flow of cool air streaming through the PWR|Stretch mesh material on the upper side of the gloves. These CE-certified and well-ventilated gloves are also equipped with a neoprene cuff; making sure that no sand or water will enter during a ride on the trails. In the armor department, the Massif gloves have flexible TPR knuckle protector shields the knuckles and fingers. Giving riders the grip they’re after comes from the included Clarino fabric, which ensures a strong hold on the handlebars.

Adjustability

• Stretch at fingers
• Stretch at thumb
• Stretch fabric on back of hand

Closure

• Hook-and-loop closure
• Wrist strap

Lining:No liner

Features

• Grip patch at the palm
• A grip patch is made with a texturized pattern to deliver a superb grip performance.
• Pull tab: fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
• Short cuff

Protection

• EVA foam palm slider
• No knuckle
• PWR|Shield at palm: PWR|Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance levels.
• Temperfoam® thumb knuckle

Outer shell material

• Clarino®
• Neoprene: Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
• PWR|Stretch mesh

CERTIFICATION

• These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 rating.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, short-cuffed, lightweight, ventilated off-road/MX gloves

Take the short-cuffed, DIRT Series, Massif gloves out with you on your next off-road adventure and enjoy the comfort and freedom of this pair snug-fitting hand protection. Ideal for warmer weather, the rider’s hands remain cool thanks to a constant flow of cool air streaming through the PWR|Stretch mesh material on the upper side of the gloves. These CE-certified and well-ventilated gloves are also equipped with a neoprene cuff; making sure that no sand or water will enter during a ride on the trails. In the armor department, the Massif gloves have flexible TPR knuckle protector shields the knuckles and fingers. Giving riders the grip they’re after comes from the included Clarino fabric, which ensures a strong hold on the handlebars.

Adjustability

• Stretch at fingers
• Stretch at thumb
• Stretch fabric on back of hand

Closure

• Hook-and-loop closure
• Wrist strap

Lining:No liner

Features

• Grip patch at the palm
• A grip patch is made with a texturized pattern to deliver a superb grip performance.
• Pull tab: fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
• Short cuff

Protection

• EVA foam palm slider
• No knuckle
• PWR|Shield at palm: PWR|Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance levels.
• Temperfoam® thumb knuckle

Outer shell material

• Clarino®
• Neoprene: Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
• PWR|Stretch mesh

CERTIFICATION

• These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 rating.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Ultra-thin, lightweight and ventilated hip and elbow protectors with CE-level 1 rating.

Product Information

SEESMART™
With outer shell technologies increasingly enabling us to create stylish yet abrasion resistant riding gear, internal protectors have been the one limiting aspect that is constant across all motorcycling segments. The SEESMART™ concept changes everything. Specifically developed for use in motorcycle gear, SEESMART™ offers the highest level of flexibility while passing the EN1621-1:2012 CE-level 1 impact tests, also in hot (T+) conditions. This development brings us another step closer to our goal of providing the ultimate motorcycle gear in every segment. This product is delivered as a set of 2 protectors (left and right).

Certification

This protection is certified according to the EN 1621-1 Standard, published in 2012 and has achieved level 1, T+ rating. For more details about certification click here.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Short-cuffed, fully ventilated, mesh urban sport gloves

Like the Spectrum gloves set a new standard in terms of comfort for spring, fall and (urban) winter use, the Kinetic gloves redefine the standard when it comes to summer gloves. The graphic designs range from muted ton-sur-ton colorways to more vibrant variants. That’s why these gloves will appeal to both adventure bike riders as well as urban sport riders, and everything in between. By incorporating a new type of lightweight, high-quality knitting technology, we have managed to not only create a completely different look but – even more importantly – a pair of gloves with a unique feel. This technology is only suitable for summer gloves and simply takes airflow to the next level. Besides airflow, everything about this glove screams comfort. With a neoprene cuff and stretch at the fingers and back hand, it will be no problem to comfortably enjoy a full day of hot weather riding. And make no mistake, these gloves are fully certified according to the latest CE motorcycle gloves standard. The injected, flexible knuckle protection element and Temperfoam® shock absorbing insert panels add to the overall safety and comfort level of the wearer. Also, here, the Connect Finger Tip feature allows you to keep your gloves on when using any type of touchscreen device.

Adjustability

• Adjustment strap at wrist: The hook-and-loop adjustment strap at the wrist allows for optimum adjustability and fit when using our gloves. Find the ideal tightness and comfort every time it is used.
• Stretch at fingers
• Stretch fabric on back of hand

Closure

• Hook-and-loop closure

Lining

• Tricot liner: Thanks to its unique close knit weave pattern Tricot is smooth on one side, while sporting texture on the other side. This makes it sturdy and soft—ideal to use in a comfortable and durable liner that will hold its shape for a very long time.

Features

• Connect Finger Tip: Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
• Grip panel at palm: This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.
• Pull tab: Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
• Short cuff

Protection

• Injected flex knuckle: This knuckle protection is injected in the upper material which makes it very flexible and abrasion resistant. Due to its structure it ventilates very well while keeping you safe.
• PWR|Shield at palm: PWR|Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance levels. This product is equipped with PWR|Shield at the palm.
• Temperfoam® finger knuckles: The self-contouring foam is used in areas where mobility and fit are a must, like the finger knuckles. Temperfoam® comes in a solid version as well as a perforated version.
• Temperfoam® knuckle
• Temperfoam® palm slider
• Temperfoam® thumb knuckle

• Automan stretch: Another type of stretch fabric, Automan is used to maintain protection while riding, but with a form-fitting and elastic silhouette that maximizes comfort.
• Connect finger tip fabric: Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
• Goatskin with WR finish: Tanned leather made from goatskin is considered extremely durable, and is often used for gloves and other products that require a soft hide. Goatskin with a WR finish has undergone a process that makes it water-repellent and soil-resistant. The WR coating is bonded to the fabric at the molecular level, enhancing the material's natural water-repellence and soil-resistance, without altering how the fabric looks, feels, or breathes.
• neoprene: Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
• PWR|Knit: PWR|knit is created through a unique technique that uses 100% high-performance polyamide yarns which are knitted together. The result is a cut, tear, and abrasion resistant fabric that feels extremely comfortable and soft.

CERTIFICATION

• These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating. For more details about certification click here.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Comfortable, highly breathable, laminated waterproof touring boots

The Quest OutDry Ladies Boots highlight our goal to offer serious touring products to everyone, male or female. They are built with rugged materials and quality components that last. The special Vibram® Mile sole offers safety, control and comfort both on and off your bike. A breathable OutDry® waterproof barrier is laminated directly to the outer shell, which means water won’t enter and the boot itself does not pick up water. We installed a reinforced zipper for long lasting performance, and the 3D mesh lining and the elastic inserts at the calf and ankle contribute to the overall feeling of comfort that you’ll find in these boots. 

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, In-boot, off-road, lightweight, flexible riding pants

Meet the Peninsula. A purpose-built pair of active fit pants for riders who prefer to wear their gear tucked inside their boots instead of over them – as part of our DIRT Series collection. The CE-certified pants are constructed of highly abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch on the inside legs, lower legs, and upper knees. This allows for maximum movement and comfort. Our flexible, lightweight, and removable SEESMART™ CE-level 1 protectors are featured at the hips and knees. And when the SEESMART™ armour is removed from the knees, the pants can be worn over our CE-level 2 Scram knee protectors. The Peninsula is also patterned to accommodate aftermarket knee braces underneath. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle while optimal fit is ensured by the ratchet waist closure while the silicon waistband will keep the pants from sliding down. In warmer temperatures, the long ventilation zippers can be zipped open to cool down the rider. And in terms of keeping your essentials close by, storage is provided by cargo pockets at the upper legs.

ALL-TERRAIN EXPLORER

From the roughest singletrack to urban blacktop, the MX-9 Adventure MIPS gets you there safely in style. Bell have taken their MX-9 and added even more capability with an integrated anti-fog, anti-scratch clear faceshield. The shield flips up and leaves enough room for goggles in extreme conditions, or it can be removed completely. Conversely, the adjustable visor can be removed for a stealth street look. MIPS protection, Velocity Flow ventilation, and a removable, washable, anti-microbial liner round out a highly adaptable package.

Italian outfit Holy Freedom has been producing quality motorcycle tube scarfs for years and has a wide range of designs and materials to suit any occasion.

If you ride a motorcycle, there are plenty of good reasons to wear a tube scarf/neck gaiter: 

• Whether you wear a full face or open face helmet tube scarfs can make a huge difference to your level of comfort by helping to keep the cold off the neck and face.
• It can be worn in many ways such as a balaclava, neck warmer, and headband.
• Ideal for all sports: motorcycling, running, tennis, cycling, beach volleyball, skiing, snowboarding, climbing, and others.
• Constructed without any seams to offer improved comfort and the benefit of increased elasticity for a multitude of fitment styles.
• An antibacterial treatment also means they’ll stay smelling fresh for longer.

What is Primaloft?

Primaloft is a synthetic microfiber with excellent thermal insulation properties. Originally developed for the United States Army it has the combined insulating benefits of both down and wool. Primaloft is able to retain body heat in all conditions, even when it’s soaking wet.

The Holy Freedom Primaloft tube scarfs are a lighter weight alternative to the Holy Freedom Polar range.

Italian outfit Holy Freedom has been producing quality motorcycle tube scarfs for years and has a wide range of designs and materials to suit any occasion.

If you ride a motorcycle, there are plenty of good reasons to wear a tube scarf/neck gaiter: 

• Whether you wear a full face or open face helmet tube scarfs can make a huge difference to your level of comfort by helping to keep the cold off the neck and face.
• It can be worn in many ways such as a balaclava, neck warmer, and headband.
• Ideal for all sports: motorcycling, running, tennis, cycling, beach volleyball, skiing, snowboarding, climbing, and others.
• Constructed without any seams to offer improved comfort and the benefit of increased elasticity for a multitude of fitment styles.
• An antibacterial treatment also means they’ll stay smelling fresh for longer.

What is Primaloft?

Primaloft is a synthetic microfiber with excellent thermal insulation properties. Originally developed for the United States Army it has the combined insulating benefits of both down and wool. Primaloft is able to retain body heat in all conditions, even when it’s soaking wet.

The Holy Freedom Primaloft tube scarfs are a lighter weight alternative to the Holy Freedom Polar range.

Italian outfit Holy Freedom has been producing quality motorcycle tube scarfs for years and has a wide range of designs and materials to suit any occasion.

Thanks to the pandemic the world’s going crazy for face masks, but if you ride a motorcycle, there are plenty of other good reasons to wear a tube scarf: 

• Whether you wear a full face or open face helmet tube scarfs can make a huge difference to your level of comfort by helping to keep the cold off the neck and face.
• It can be worn in many ways such as a balaclava, neck warmer, and headband.
• Ideal for all sports: motorcycling, running, tennis, cycling, beach volleyball, skiing, snowboarding, climbing, and others.
• Constructed without any seams to offer improved comfort and the benefit of increased elasticity for a multitude of fitment styles.
• An antibacterial treatment also means they’ll stay smelling fresh for longer.
• Superior stretch
• Moisture management
• Lightweight
• Stops the wind

Snap-on shield for the DMD Racer Helmet. Available in clear and smoke.

PRODUCT CARE

The DMD visors are anti-scratch. The shields are very strong and durable, but they can get damaged.

Take care not to expose your shield to any chemicals. Visor cleaning should be done only with warm water, mild soap and a micro fiber cloth.

Meta Evo Gloves: Comfort and Protection for Motorcyclists

Want to ride in style without compromising on safety? The Meta Evo Gloves offer the perfect combination: comfort, protection, and security. These short gloves made of perforated goat leather are designed to accompany you everywhere. Take the handlebars, your hands are in good hands.

Ride with the Racer Meta Evo Gloves and experience the thrill of hitting the road with gloves that truly keep up with your pace. Ready to shift into high gear? Take advantage now and gear up!

FEATURES :

• Perforated goat leather: breathability and fit.
• Goat leather and PU spandex palm: agility and control.
• Pre-shaped metacarpal protection, D3O reinforcement, and finger reinforcements: enhanced safety.
• Touchscreen-compatible index: screen-friendly.
• CE KP1 certified.

Crafted from custom British Millerain 8oz. ultracore waxed cotton, our classic MA1 Brecon motorcycle bomber comes with D3O shoulder and elbow armour as standard and an internal pocket for an optional back protector (D3O Viper or Stealth recommended). Functional detail includes internal trouser loops and sleeve adjusters to hold armour in place, a silicon hip stud protects your tank, and a fold back collar loop provides further functionality. With two side pockets, the placket rain gutter helps keep you dry and there’s a classic check lining and woven logo arm patch.

BENEFITS

• D3O Armour: Fitted with protective, removable armour by D3O
• AA Rated: CE AA rated for middle-level protection for more severe impacts and abrasions, suitable for highway and tour riding.
• Ultracore Waxed Cotton: 8oz. Ultracore Bonneville is exclusive to Belstaff, and is lighter and more durable than classic waxed cotton.

DETAILS

• A classic MA1 bomber jacket, in waxed cotton with AA protection
• Belstaff exclusive finish Ultracore waxed cotton
• Zipped back protector pocket (D3O Viper or Ghost recommended)
• Belstaff woven logo patch on left arm
• Sleeve adjusters to hold armour in place
• Stud fastening internal trouser loops
• Silicone stud at hip to prevent tank scratch
• Placket rain gutter to prevent water ingress
• Two side entry pockets
• Signature checked cotton lining
• Fold back loop at collar
• Shell: 52% Cotton, 48% Polyester. Waterproof Membrane: 100% Polyester, Coated Polyurethane. Body Lining: 100% Cotton. Sleeve Lining: 100% Polyamide. Rib: 97% Polyester, 3% Spandex. Filling: 100% Polyester
• Certification: AA
• Protection: D3O Tri-ventilation level 1 (Elbow/Shoulder)
• Product ref:105541OLIGR

CARE

• Do not wash, bleach, tumble dry, iron, dry clean or use biological cleaning products
• Clean in professional care centre.
• Remove intermediate protectors before washing.
• Dry away from heat sources
• Sponge clean soiled areas with lukewarm water and mild soap.
• Remove soap with a brush and cold water.
• Rewax regularly to keep the garment waterproof and make it last longer

SIZE & FIT

• Cut for a relaxed fit
• Model wears a size L
• Model measures: Height: 6'2", Chest: 42", Waist: 32"

NOTE: ECE 22.06 certified helmets do not accept face shields from previous generation Gringo models. Replacement shields in chrome mirror and dark smoke tints are available.

Technical Details

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Helmet Fitment

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model. 

NOTE: Biltwell offers accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

The Racer Meta 4 is a sporty short motorcycle glove made entirely of perforated goat leather. The many perforations give it excellent ventilation. Its shell and its silicone and foam reinforcements on the fingers ensure very good protection. The palm has a D3O® pad and a tactile index finger.

Features:

• Perforated goat leather
• Premium leather palm
• Mesh lining
• Hard knuckle protection
• D3O® pad on palm
• Silicone and foam reinforcements on the fingers
• Tactile index finger / touch tip
• Short cuff
• Regular women's fit

The jet Retro Olive Gold helmet is part of the DMD jet Retro helmet collection. The shell is single-color, made in the color olive: this choice gives the helmet a refined and elegant look.
Small and compact, the jet Retro Olive helmet will embellish your look in the saddle, whatever bike you have: Custom, Vintage, Cafe Racer or scooter.

KEY FEATURES

Precious: the simplicity of a single-color helmet with a bright and elegant hue.

Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.

Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell

TECHNICAL DETAILS:

• Helmet weight: 900 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
• Shell 2: L - 58 cm
• Shell 3: XL - 59/60 cm; XXL - 61 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

The jet Retro Ocra helmet is part of the DMD Retro helmet collection. The shell is single-color, made in the color ocra: this choice gives the helmet a refined and elegant look.

Small and compact, the jet Retro Gold helmet will embellish your look in the saddle, whatever bike you have: Custom, Vintage, Cafe Racer or scooter.

Matt finish.

KEY FEATURES

Precious: the simplicity of a single-color helmet with a bright and elegant hue.

Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.

Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell

TECHNICAL DETAILS:

• Helmet weight: 900 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
• Shell 2: L - 58 cm
• Shell 3: XL - 59/60 cm; XXL - 61 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

D3O Viper Air L2 Back Protector

Mitigate Fear. Prevent Injury. D3O’s materials are designed to absorb and dissipate energy in response to blunt force impact. 

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Waterproof high-top urban sneakers

When you prefer sneakers over sturdy, protective motorcycle boots, look no further than the Delta H2O Ladies shoes. They’re made for motorcycle-loving sneakerheads or sneaker-loving petrol heads. These riding trainers provide a casual look but that doesn’t mean you have to sacrifice safety or function for style. The Delta H2O Ladies tick all the boxes. They are waterproof, thanks to the incorporation of our hydratex® waterproof membrane, they are highly protective thanks to the thermoformed heel and toe cups, and an injected ankle cup, and they are very comfortable thanks to the OrthoLite® X40 insole. On top of that, for nighttime visibility, you will find reflective elements on the tongue and on the back. Our designers developed these sneakers based on the female fit patterning, resulting in a sneaker that offers a more elegant and sophisticated appearance. On the inside, the sole has a slight lift in the heel which is a much sought after feature by female riders. The Delta H2O Ladies shoes enable you to ride in a casual style, comfortably, and safe in any weather.

Features

• Extra pair of laces in different color
• OrthoLite® X40™ foam insole
• Padded tongue
• Slip-resistant sole
• Closure: Laces
• Lining: Soft mesh lining
• Waterproofing
• hydratex®|Z-liner: A waterproof layer is laminated onto a carrier to construct the REV’IT! hydratex®|Z-liner membrane. The carrier, in turn, protects the membrane against wear-and-tear damage, and the seams of the membrane are taped to ensure waterproofing. The Z- liner is constructed between the lining and the outer shell. The REV’IT! hydratex®|Z-liner membrane is used in garments that demand a high level of all-weather protection.
• Protection:
• Injected ankle cup
• Reinforced side panel
• Reinforced ankle
• Reinforced heel
• Reinforced toe
• Thermoformed heel cup: The heel of the boot is reinforced for added safety. The rider won't notice it while wearing as the hard plastic has been heated to mold it into the perfect shape. The reinforced heel cup also contributes to a better posture of the foot.
• Thermoformed toecap
• Outer shell material
• Reinforced denim
• Oiled suede
• Visibility: Reflection at heel
  
• Certification: These shoes are certified according to the EN 13634 Standard, published in 2017 and have achieved level 1 | 1 | 1| 1 rating. For more details about certification click here.

Merlin Heritage Collection

The Merlin Heritage Collection seamlessly blends classic styling with modern protection to create a versatile selection of motorcycle clothing. We use a range of different market-leading materials, including Halley Stevensons® Waxed Cotton, D3O® armour and Reissa® waterproofing to ensure the highest quality. Our heritage collection also expands into leather garments for retro riders who want the old-school looks minus the signature feel of waxed cotton. Combining the best of British-made motorcycle clothing, our Heritage line offers a wide variety for both men and women.

Merlin Hixon II Leather Jacket

The original Hixon jacket was first released in 2016 and was a staple of the Merlin collection for many years. As part of the Hixon refresh we have kept the well-received super soft and supple leather and added in a number of new improvements. The first of these upgrades includes D3O® armour which sits in the shoulders and elbows. Hixon II then has a revised fit with a slightly longer length, new design details and crucially includes more ventilation – with three back vents and two chest ventilation points added.

Caring for your Hixon II jacket

Because of the ‘naked’ leather finish of Hixon II, we would recommend purchasing an aniline leather cleaner and an aniline leather guard. You can also buy aniline moisturiser to restore moisture to the Hixon at longer intervals. Please test any new cleaners on an inconspicuous area of the jacket first. View our full wash and care guide here: Merlin Wash & Care.

D3O Diablo™ L2 HIP Protectors

D3O Diablo™ L2 SHOULDER Protectors

WRAITH MOTORCYCLE GLOVES

Conforming to Standard Motone Construction Norms meaning : Only Premium Materials 

• Cow Nubuck Leather - the first premium leather hyde we have worked in conjunction with our tannery to produce to our spec specific to us here - designed to have a soft feel, matte style look, and to develop a patina over time 
• We have also employed some soft Goat Analine leather on the palm areas
• Hidden composite knuckle protectors sewn into the gloves
• Accordion panels at wrists and fingers for improved digit dexterity
• Adjustable Cuff Strap with Buttons
• Finger Ventilation
• EVA Rubber across Palm area for improved comfort
• Touchscreen Compatible for Navigation of catching Pokemon with gloves on

WRAITH FITS SNUG - WE RECOMMEND IF IN DOUBT TO SIZE UP

The SeventyFive is a tribute to the stylish icon of the 70’S. The helmet is a play on the design of the Racer model and the name comes from the year when the company was born. The helmet has slotted air vents to increase ventilation and it has 3 snaps to allow for fitment of DMD's snap-on visor. It has a space large enough to accommodate most goggles. This model is also compatible with DMD's new SeventyFive Goggle  and with the DMD Ghost goggles.

The Oro Collection takes the SeventyFive line up and kicks it up a few notches incorporating a carbon kevlar shell, Italian leather trim and an inner lining made of leather and Shalimar. It is the result of the perfect union of the best Italian leather and DMD craftsmen’s skilled hands.

TECHNICAL DETAILS

• Carbon kevlar shell
• Italian leather trim
• Inner lining made of leather and Shalimar, removable and washable.
• Padded chin strap with Double D-ring closure
• ECE Homologation
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing then permit to air dry whenever possible to prevent heat damage.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Multi-season, multi-purpose textile jacket for the adventure-hungry traveler.

Experience la passione italiana with the Sidi Mid Adventure 2 Gore Boot. Crafted for the adventurous spirit, this boot combines Italian craftsmanship with every day comfort and durability. Perfect for navigating diverse terrains with ease and style, it's your essential companion for both wet and dry journeys. The mid version is a shorter, more pratical version of the Adventure 2 gore. While the non-slip rubber outsole provides optimum grip and total control in all situations and terrain, the micro-adjustable buckle system ensures total comfort. Versatile and untiring, the special Gore fabric is a bonus for the best possible exploration, even in rain and muddy conditions.

Velcro and Replaceable Buckle System

PRODUCT BENEFITS

• Ready for any adventure: featuring SCRATCH-RESISTANT MICROFIBER/SUEDE
• Individual fitting and adjustment: IMPACT RESISTANT DURABLE BUCKLES
• Unmacthed grip, stability and comfort: ADVENTURE SOLE
• Shielded: integrated protections
• Long range comfort: supreme comfort is a must when touring in the unknown. Adventures sometimes have no respect for our fatigue, so we engineered our boot to be the most comfortable structure a pro dual rider will want to wear.
• Offroad control: specially designed to be unbeatable on dirt roads, the boot has all the mechanisms to control the unexpected and protect the foot.
• Control: a rubber sole with grip, designed to give riding feeling, safety and stability.

THE JD/ONE SUNPEAKS

ONE HELMET – 1000 WAYS TO MAKE IT YOURS 

Discover versatility and style – discover JD/ONE Sun Peaks

Looking for a sun peak with maximum functionality and individuality? If so, our Sun Peaks are an ideal accessory for your JD/ONE helmet. The variety of colours and designs available means you can design your JD/ONE just the way you want it. Choose from six different colours and find the combination that matches your style.

JD/ONE Sun Peaks are available in two lengths: Our compact and stylish Short Peak is ideal for a minimalist look, whereas our Long Peak comes with integrated air vents giving you sufficient aerodynamics while also shielding your eyes from the sun.

Good to know: Our Sun Peaks come with their own unique fastening mechanism. They use the same screw fastening mechanism as our visors so you can wear either a visor or a Sun Peak, but not both at the same time. This gives you easy adjustment depending on your requirements and driving style.

The screws also come in a variety of colours for you to customise the look of your helmet. You have a selection of eight different colours to cruise your style.

Simple installation: Attaching your Sun Peak to your helmet is quick and easy using our tried-and-true Multi-Lock system. Just click it in, fasten the screw, and you’re good to go.

Made for Riding - John Doe.

Specifications:

• JD/One Multi-Lock system      
• JD/ONE customisation kit
• Available in 6 colors depending on length
• Sunshade function for a clear view ahead
• Long Peak: Aerodynamic air vents

THE JD/ONE SUNPEAKS

ONE HELMET – 1000 WAYS TO MAKE IT YOURS 

Discover versatility and style – discover JD/ONE Sun Peaks

Looking for a sun peak with maximum functionality and individuality? If so, our Sun Peaks are an ideal accessory for your JD/ONE helmet. The variety of colours and designs available means you can design your JD/ONE just the way you want it. Choose from six different colours and find the combination that matches your style.

JD/ONE Sun Peaks are available in two lengths: Our compact and stylish Short Peak is ideal for a minimalist look, whereas our Long Peak comes with integrated air vents giving you sufficient aerodynamics while also shielding your eyes from the sun.

Good to know: Our Sun Peaks come with their own unique fastening mechanism. They use the same screw fastening mechanism as our visors so you can wear either a visor or a Sun Peak, but not both at the same time. This gives you easy adjustment depending on your requirements and driving style.

The screws also come in a variety of colours for you to customise the look of your helmet. You have a selection of eight different colours to cruise your style.

Simple installation: Attaching your Sun Peak to your helmet is quick and easy using our tried-and-true Multi-Lock system. Just click it in, fasten the screw, and you’re good to go.

Made for Riding - John Doe.

Specifications:

• JD/One Multi-Lock system      
• JD/ONE customisation kit
• Available in 6 colors depending on length
• Sunshade function for a clear view ahead
• Long Peak: Aerodynamic air vents

Our JD/One Helmet gives you no end of possibilities for customisation to match your look. The helmet comes in a retro 70s design without compromising on safety and comfort. Whether you’re into speeding along the highways, planning an off-road adventure, or aiming for that old-school look, this helmet goes with every motorbiking style. Our newly developed Multi-Lock system makes it easy to attach accessories such as a visor, sun peak, or blanking panel. This lets you customise your helmet exactly the way you want it. Discover a world of accessories for JD/One helmets.

A thousand ways to customise your JD/One Helmet

These helmets are certified according to ECE 22.06 and DOT FMVSS No. 218 test procedures. We’ve been able to design an extremely compact helmet shell in advanced composite fibreglass that’s strong enough to satisfy this rigorous level of testing. Our JD/One helmets benefit from state-of-the-art manufacturing processes and technologies coupled with timeless design. We have developed a separate helmet shell for each helmet size to ensure maximum comfort; only sizes XS and S share the same outer shell. This will make it easier for you find the JD/One helmet that fits your head and your style. The internal vent system is adjustable to multiple levels at the front and back of the helmet; it cools the air around your head as you ride, safely routing moisture and heat out of the helmet. 

As you’d expect, your JD/One helmet comes with anti-fog/scratch visor coating, emergency quick-release system (EQRS), double-D fastening, and replaceable and adjustable inner lining as standard.

Made for Riding – John Doe.

Specifications:

• JD/One customisation system
• Shell in plastic-reinforced fibreglass (FRP) and carbon composite
• Certified according to ECE 22.06 (EU) and DOT FMVSS No. 218 (US)
• Multi-part EPS system with varying shock absorption rates
• Extra-large field of view
• Ventilation system at the front/back, adjustable to multiple levels
• JD/One visor anti-fog, anti-scratch, UV block (clear and tinted versions)
• Weight 1,450g +/- 50g (FRP, size M)
• Prepared for communications/speakers - purchase a comm system of your choice (e.g., Cardo, Sena) separately
• Replaceable inner lining and cheek pads, washable
• Cheek pads available in various sizes, inter-compatible (15,20,25,30,35,40 mm)
• Emergency quick-release system (EQRS)
• Suitable for glasses wearers
• Inner padding in quick-dry antibacterial fabric
• Outer shells in 4 sizes (XS-S/M/L/XL)
• Double D-ring fastening system

What’s in the box:

• One helmet
• Two visors – one clear, one tinted
• One visor cover

Optional accessories: 

• JD/One goggles
• JD/One sun peak, long
• JD/One sun peak, short
• JD/One CNC screw for visors
• JD/One CNC screw for sun peaks
• JD/One inner padding
• JD/One cheek pads
• JD/One ECE visor
• JD/One racing only visor
• JD/One visor washer
• JD/One visor cover
• JD/One visor mechanis