MOTORCYCLE PARTS

Laser cut out of steel and powder coated Black these brackets are designed to work with the bolt spacing on any of our Round tail lights (Eldorado, Bel Air, Miller, Lecter, Cuda, etc) 

You can use this bracket anywhere on the bike: it also is designed to slide in between our fender light bracket and our tail lights in an assembly (e.g. Eldorado fender light kit) so you can mount a plate with them, with the down facing lights on the tail light illuminating the plate. 

Often used in Combination with our Rear Mudguards such as the Motone High-Tail Custom Mudguard.

NOTE: Motone Fender Light Kit (e.g. Eldorado) and wiring loom (e.g. DDM012) must be purchased separately. Please click on the links if you'd like to add these to your cart as well.

MC PART ID: PTS012

Bolt-On Kit for Speed Twin 1200 and 1200 RS

Motone kit allows you to tidy up and reconfigure the rear end for a much tighter/neater look.

Its made out of both mild steel and sheet aluminium and we use a Delrin rubber which we have CNC milled so you can remount your existing license plate illumination light. 

Depending on year of your bike you may end up with some extra bolts surplus to requirements

MC PART ID: CBS005

MC PART ID: MMU600+DDM019+MEL021

This new version is compatible with the Liquid cooled bikes and can be fitted either on the Left or Right side of the bike (so its possible to purchase 2 of the kits to fit one on either side of the bike).

Designed to fit and tested on the Street Twin, Street Cup, Street Scrambler, T100, T120, Thruxton R, Thruxton, Speed Twin

May also fit more models

MC PART ID: MMU072

Hot Forged out of Solid Brass Billets, machined and then Polished these fork top caps are easy enough to swap out and add some brass to your bike - they are also designed to fit well with The Boss our brass Yoke Nut

This particular listing is for the 47mm Fork Bobber Black, which is also the fork used on the Speedmaster from 2021 On 

For Speedmasters from 2002-2016 you need part MMU512 ,  for the 41mm Liquid Cooled Speedmasters 2018-2020 You need part MMU514

MC PART ID: MMU516

Machined out of CZ121 Brass Billet - Yoke Nut is suitable for use on all the 2016 and Up Triumph Twin Motorcycles 

Also known as Triple Tree Nut / Steering Stem Nut and Top Yoke Nut 

Fits the following Liquid Cooled (LC) Triumph Bikes:

• Street Twin (Speed Twin 900)
• Speed Twin
• Street Scrambler (Scrambler 900)
• Street Cup
• Bobber
• Speedmaster
• Thruxton
• Scrambler 1200
• T100
• T120

Please note if you have a 2001-2015 Bonnie check out MMU069 instead

MC PART ID: MMU068

MC PART ID: MMU012

MC PART ID: MMU009

MC PART ID: MMU016

MC PART ID: MMU548

MC PART ID: MMU549

MC PART ID: MMU021

MC PART ID: MMU032

MC PART ID: MMU022

Forged out of Solid Brass with 1970s inspired Finned top

Fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars.

Fits:

• Bonneville, T100, America, T120, Speedmaster, Thruxton, Bobber

MC PART ID: MMU511

CNC Cut from billet aviation 6061-T6 aluminum - fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars.

Some models it will fit include Bonneville, T100, America, T120, Speedmaster, Thruxton.

MC PART ID: SNG215

High Pressure Die Cast aluminium with domed ribbed Union Jack design

Top face is mirror polished

Fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars.

Fits: Bonneville, T100, America, T120, Speedmaster, Thruxton, Bobber

MC PART ID: MMU074

We recommend to use thread locker when fitting this and many other parts to your motorcycle.

NOTE: Does NOT fit Scrambler 1200, Speed Twin 1200, or Thruxton 1200 R/RS

MC PART ID: GSS005

MC PART ID: GSS004

Double sided Moto Bar Pad fits on Biltwell Moto Bars and other crossbar-equipped handlebars. 8.25” long, 2” OD and a ¾” foam core pad will go a long way towards keeping your teeth in your mouth.

The VANS x CULT MOTORCYCLE waffle grip is finally here...

CULT's long-lasting collaboration with VANS has just gotten better... The best grip in the industry has now made it to motorcycles... Available in both 7/8" and 1" in a variety of colors... They feature the classic Vans waffle sole pattern with a domed center section for improved comfort and vibration dampening... The grip was designed by Cult and sent to ODI for production. Using their proprietary rubber compound, we have created a grip that we hope will become as much of a classic as a pair of Vans. 

These are meant to slide on like any other standard rubber grip... A throttle tube is required for these grips to work on your MC... Grip does not include a built-in throttle tube... Each set comes with two grips, one grip with a small inside diameter to slide over the handlebar and another grip with a larger inside diameter that slides over the throttle side...125mm length. Sold in pairs. Made in the USA by ODI... 

The universal rubber grip for handlebars with 1 inch or 22 mm (7/8 inch) tube diameter.

The mo.grip soft is a universal rubber grip for handlebars with a 1 inch or 22 mm (7/8 inch) tube diameter with an attractive look.

Its dimensions and grip profile are just as characteristic as the mo.grip aluminum grip.

Like the aluminum grip, it fits perfectly with the mo.blaze disc or mo.blaze cone handlebar end blinker and, together with the mo.switch mini, creates an extremely harmonious handlebar design.

Technical Data:

• Inner diameter (22mm): left 22 mm / right 24.5 mm (throttle grip)
• Inner diameter (1 inch): left 25.4 mm / right 27.5 mm (throttle grip)
• Outer diameter: 35 mm
• Width: 123 mm

What's Included?

1 pair of rubber grips mo.grip soft

RIZOMA CLUTCH LEVER 3D BLACK

Features:

• Machined from billet aluminum
• 3D machining
• Light weight and aerodynamic
• Extreme grip and wide adjustment
• Articulated joint to prevent breakage
• Interchangeable colored ring kit
• Rizoma Part Numbers: LCJ801B & LCJ803B

***Note: contact us or visit the Rizoma website to determine the part number that fits your bike: http://www.rizoma.com/universal/brake-clutch-levers/leve-3d/en

RIZOMA BRAKE LEVER 3D BLACK

Features:

• Machined from billet aluminum
• 3D machining
• Light weight and aerodynamic
• Extreme grip and wide adjustment
• Articulated joint to prevent breakage
• Interchangeable colored ring kit
• Rizoma part number LBJ100B

***Note: contact us or visit the Rizoma website to determine the part number that fits your bike: http://www.rizoma.com/universal/brake-clutch-levers/leve-3d/en

The Rizoma Proguard Lever Protection System is a protection device designed for either the brake and clutch levers. Designed and developed for racing, the Proguard System is a practical application even on the street. They afford perfect aerodynamic efficacy and lever protection in the event of unintentional contact. The kit includes 1 x M6x40 UNI5931 screw. Weight: 184 g. Rizoma part number LP010B. Note: The mounting of the protector requires the use of adapters. See listing for RIZOMA PROGUARD MOUNTING ADAPTOR - LP310B

Rizoma fluid reservoir adapters provide the most appropriate mounting solution when replacing an OEM reservoir with a Rizoma one.

Technical Info

• The kit includes mounting plate and fixings required for assembly.
• Not compatible with fluid reservoirs CT015, CT017, CT115.
• Mounting Instructions

Rizoma Spy-R Bar End Mirror 57mm Black - BS185B

The Spy-R is a low profile bar end mirror that can mounted at any orientation. Above, below, in front of or behind the handlebar. In addition to superb adjustability and styling, the Spy-R Mirrors feature a convex, antiglare lens that ensures a wide and clear field of view. 

Features:

• Billet aluminium construction
  
• Convex, antiglare glass
  
• Biposition design
  
• Ample angle and position adjustment
• Sold individually as a single black 57mm mirror - if you need a mirror for both the right and left sides, add a quantity of 2 to your cart. If you require the mirror in a different size or color, please contact us.
  
• Note: A Rizoma end mirror mount/Proguard Adapter is required for installation and must be purchased separately. If only one mirror will be installed, Rizoma recommends that the Rizoma Single Bar End for Finishing, available separately, be installed on the opposite side to maintain visual symmetry. To determine which mirror mount is required to fit on your bike, please contact us or visit the Rizoma website to enter your year, make and model of bike: http://www.rizoma.com/universal/mirrors/spy-r-bs185-bs285-bs294/en
  

RIZOMA SPY ARM MIRROR 80MM BLACK - BS303B

• Convex and Antiglare Glass
  
• Machined from billet aluminum
  
• 3D machining
  
• Usable with 22mm (7/8) and 25.4 mm (1 Inch) handlebars
  
• Available in black - for other colors please contact us
  
• Sold individualy
• Note: Rizoma Spy Arm Mirrors may require adapters to fit your bike. Please contact us or visit the Rizoma website to determine the adapters required for your year, make and model of bike: http://www.rizoma.com/universal/mirrors/spyarm/en
  

TRILINE/ TYPE S / PAIR OF BAR END MIRRORS (2 PCS)

• Stealth Triline Design
• 80mm Mirror Head
• 6061-T6 Billet Aluminium Body
• BLACK ANODISED MATTE FINISH
• Hard Scratch Resistant Automotive Glass
• R1400 Convex Reflective Glass
• Billet Adapters for both 22mm (7/8s) and 25.4mm (Inch) Handlebars

Motone Billet Mirrors available either as single mirrors or in pairs in size variants :

• Type S (Small 80mm)
• Type R (Regular 100mm - Emarked) 

***This listing is for the Type S (80 mm size) mirrors and are sold as a pair.***

All Motone Billet Mirrors use real automotive glass components in our mirror products due in part to the scratch resistant nature of the engineered Glass surface - polished aluminium for reflective surface cannot hold up to same level of scratch resistance - and the other key advantage of using engineered glass means we are able to achieve a R1400 lever of reflection (much wider angle than flat aluminium/non automotive glass).

MC PART ID: 2XMRR003 

SOLD PER PIECE! Please order 2 mirrors for a set.

The small and reduced handlebar end mirror can be mounted above or below the handlebars. The angle of the mirror arm can be individually selected.

Our glassless mirror series mo.view is unique in the world. The special feature of our mirrors is the patented mirror surface, which is worked directly from the metal of the body. The aluminum itself is the mirror surface.

The mirror body itself becomes very thin and light, creating a weightless design with no rim or frame. The convex mirror surface is manufactured by flycutting using diamond tools on ultra-precision machines in Berlin. It is then made resistant to oxidation, corrosion and abrasion by a complex plasma coating in a vacuum.

The mirror body, mirror arm and the clamp for the handlebar end are milled from solid aluminum on CNC-machined from solid aluminium and anodized to a high quality. All screws are made of stainless steel. The precise ball joint enables the
convenient and very stable adjustment of the mirror. Glass breakage or glass falling out is simply not possible.

The handlebar end mirror can be mounted above or below the handlebar. The small arm can be swiveled. The mirror is suitable for the right and left side. Mounting is directly on the handlebar end (22 mm and 1 inch) or if the grips and fittings can not be moved, using the mo.view bar adapter.

Cleaning: Use a mild cleaning agent and a microfiber cloth to remove
dirt, dust and other residues from the surface of the mirrors.
remove. Avoid abrasive cleaning agents that could damage the surface.
surface.

Technical Data:

• Mirror body diameter: 75 mm
• Thickness of the mirror body without ball head: 4 mm
• Length of the mirror arm: 61 mm
• Clamp diameter: can be used for 22 mm and 1 inch handlebars
• Clamp width: 8 mm
• Weight: 86 g

What's Included?

• 1x mo.view spy mirror (without ECE marking) with arm
• 1x clamp
• QR code for mounting and operating instructions

SOLD PER PIECE! Please order 2 mirrors for a set.

The handlebar end mirror with swivel mirror arm and defined detent angles is perfect for narrow passages or space problems in the garage. The mirror can be mounted above or below the handlebar.

Our glassless mirror series mo.view is unique in the world. The special feature of our mirrors is the patented mirror surface, which is worked directly from the metal of the body. The aluminum itself is the mirror surface.

The mirror body itself becomes very thin and light, creating a weightless design with no rim or frame. The convex mirror surface is manufactured by flycutting using diamond tools on ultra-precision machines in Berlin. It is then made resistant to oxidation, corrosion and abrasion by a complex plasma coating in a vacuum.

The mirror body, mirror arm and the clamp for the handlebar end are milled from solid aluminum and CNC-machined from solid aluminium and anodized to a high quality. All screws are made of stainless steel. The precise ball joint allows the mirror to be adjusted comfortably and very stably. Glass breakage or glass falling out is simply not possible.

As a special feature, the mirrors of the flip series have a pivoting mirror arm with defined detent angles at 45° intervals. This allows the mirror to be tilted upwards if required without changing the setting of the mirror.

For narrow passages, space problems in the garage or for transportation extremely practical. The locking mechanism is very stable and cannot be adjusted accidentally. The mirror does not vibrate even at high speeds when fitted correctly.

The mirror can be mounted either above or below the handlebars and is suitable suitable for the right and left side. It is mounted directly on the handlebar end (22 mm and 1 inch) or, if the grips and fittings cannot be moved, using a mo.view bar adapter.

Technical Data:

• Mirror body diameter: 75 mm
• Thickness of the mirror body without ball head: 4 mm
• Length of the mirror arm: 61 mm
• Clamp diameter: can be used for 22 mm and 1 inch handlebars
• Clamp width: 12 mm
• Weight: 110 g

What's Included?

• 1x mo.view spy flip mirror with arm
• 1x clamp
• QR code for mounting and operating instructions

Each specific mirror adapter is specially made for the corresponding motorcycle model to ensure the best possible fit on the handlebar, combining practicality and comfort without compromising the minimalist visual impact.

To determine whether this part will fit your bike, please visit the Rizoma site and select your make and model and year of bike: https://www.rizoma.com/en/bs819.html?moto=12331

Each specific mirror adapter is specially made for the corresponding motorcycle model to ensure the best possible fit on the handlebar. To ensure continuity of design, the lathed steel adapter matches the lines of the mirror, combining practicality and comfort without compromising on looks.

• The Kit includes: Stud M10x1.25/M6
• To be used with Rizoma One mirror
• Sold each

To determine whether this part will fit your bike, please visit the Rizoma site and select your make and model and year of bike: https://www.rizoma.com/en/bs814.html?moto=12331

Each specific mirror adapter is specially made for the corresponding motorcycle model to ensure the best possible fit on the handlebar. To ensure continuity of design, the lathed steel adapter matches the lines of the mirror, combining practicality and comfort without compromising on looks.

The Kit includes: Stud M10x1.25/M10x1.25 + Stud M10x1.25/M10x1.25-SX + Stud M10x1.25/M10 + Stud M10x1.25/M8 + Stud M10x1.25/M8SX and washers required for assembly.

To determine whether this part will fit your bike, please visit the Rizoma site and select your make and model and year of bike: https://www.rizoma.com/en/bs_adapt_direct.html?moto=12331

Each specific mirror adapter is specially made for the corresponding motorcycle model to ensure the best possible fit on the handlebar, combining practicality and comfort without compromising the minimalist visual impact.

The Kit includes: Screws M6x60, M5x55, M5x40 and washer.

To determine whether this part will fit your bike, please visit the Rizoma site and select your make and model and year of bike: https://www.rizoma.com/en/bs814.html?moto=12331

Simple items but ones with a significant visual impact, these anodized aluminum bar-end plugs offer outstanding color and design. Rizoma provides unique styling, ensuring every detail makes an impact. Rizoma bar-end plugs are also supplied with different adapters to fit original handlebars or other types.

WEIGHT (ea.): 0.034 kg
Compatible with handlebars with an internal diameter of 13 - 18 mm and M6 thread.
The Kit includes: Screws M6x30 - M6x60.

To determine whether this part will fit your bike, please visit the Rizoma site and select your make and model and year of bike: https://www.rizoma.com/en/bs819.html?moto=12331

The universal mirror adapter for bar-end mirrors has been created to ensure Rizoma mirrors will attach to any motorcycle with handlebars with an external diameter of 22 mm and an internal diameter of 13.5 - 20 mm.

It follows the lines of the mirror smoothly, guaranteeing continuity of design and leaving nothing to chance. Also made from billet aluminum for long-lasting strength.

WEIGHT (ea.): 0.046 - 0.048 kg

The Kit includes: Screws M6x40 + M6x35, single bar-end plug, expansion sleeve Ø 13,5 mm, expansion sleeve Ø 17 mm and washers required for assembly.

Sold individually. If you need to mount a mirror on both the right and left sides of the bike, please order two (2).

Rizoma LP310B Adapter for Rizoma Bar End Mirror / Proguard Lever Guard - '13-'15 Triumph Speed Triple/R 1050, '07-'12 Street Triple

•  Each adaptor should be used for one side only; therefore if you want to install on both the right and left, you should add 2 adaptors (quantity 2) to the cart

Formed out of 300 Series Stainless Steel and designed to fit on your 2016 and up Triumph Twin

This is the Skirmish! Our handly little Mini Rack/Passenger Grab Rail/In Garage Parking assistant - We made this so if you want to pop out for a quick trip to the shop to grab a 6 pack/coincidentally taking cover from your family well now you have a slightly better excuse - unlike all the other racks we have seen out there we also included a couple of handy latch tie downs position points  

The Rail is also useful for parking the bike in confined space as well as for any passenger.

• Street Twin / Speed Twin 900 
• Street Scrambler / Scrambler 900
• Street Cup
• T100
• T120

***NEWLY UPDATED - THIS IS V2.0 OF THE SKIRMISH RACK WHICH FITS MOST KNOWN SEATS***

✅DOES FIT ALL OE STREET TWIN, SPEED TWIN 900, STREET SCRAMBLER, SCRAMBLER 900 SEATS

✅DOES FIT ALL MOTONE AND ALL KNOWN AFTERMARKET SEATS

✅DOES FIT OEM T100/T120 TRIUMPH QUILTED & RIBBED BENCH SEAT

✅ DOES  FIT OEM T100/T120 OE "COMFORT" SEAT

If you have a pre 2016 bike we will have a version out for your bike at some point, please don't buy this on the off chance it will fit - the bolt holes are in different positions.  

Unfortunately the Speed Twin 1200 has a different subframe so won't fit.

MC PART ID: MCB026

Formed out of 300 Series Stainless Steel and designed to fit on your 2016 and up Triumph Twin

The Grand Tourer Rack is more capable for longer sojourns into the countryside than the Motone Skirmish Mini Rack: as well as mounting under the frame, it also uses the shock bolt mounts for extra brace to carry a bit more weight.

The main loading area of the rack also has a couple of tie down brackets welded on so you can actually strap your bags up tight.

The Rail is also useful for parking the bike in a confined space as well as for any passenger.

Compatible Triumph Models:

• Street Twin / Speed Twin 900 
• Street Scrambler / Scrambler 900
• Street Cup
• T100
• T120

✅DOES FIT ALL OE STREET TWIN, SPEED TWIN 900, STREET SCRAMBLER, SCRAMBLER 900 SEATS

✅DOES FIT ALL MOTONE AND ALL KNOWN AFTERMARKET SEATS

✅DOES FIT OEM T100/T120 TRIUMPH QUILTED & RIBBED BENCH SEAT

✅ DOES FIT OEM T100/T120 "COMFORT" SEAT

If you have a pre-2016 bike, Motone will have a version out for your bike at some point, please don't buy this on the off chance it will fit - the bolt holes are in different positions.  

Unfortunately the Speed Twin 1200 has a different subframe so won't fit - but Motone may do a version.

MC PART ID: MCB024

Motone Quality :

• Built from 16mm Diameter Grade 304 Stainless Steel Tubing with 1.25mm Wall Thickness
• Investment Cast Brackets
• Smooth Welds
• Powder Coat Black Finish

High Quality Pannier Rails with Investment Cast brackets in type 304 Stainless Steel - BLACK

Suitable for:

• Triumph Bonneville Bobber
• Triumph Bonneville Bobber Black
• Triumph Bonneville Speedmaster 1200

You may wish to combine with the Kriega DUO-28 Saddlebags to give you storage and turn your daily rider into a touring machine.

MC PART ID: MCB004

Motone Quality:

• Built from 16mm Diameter Grade 304 Stainless Steel Tubing with 1.25mm Wall Thickness
• Investment Cast Brackets
• Smooth Welds
• Black Powder Coat 

High Quality Pannier Rails with Investment Cast brackets in type 304 Stainless Steel - Black Powder Coat

Suitable for:

• Triumph T100 2017 and up
• Triumph T120 2016 and up
• Triumph Street Twin 2016 and up
• Triumph Street Scrambler 2017  and all further years and up (though obviously LHS only if high pipes)
• Triumph Street Cup  and all further years and up

Recommend combining with the Kriega DUO-28 Saddlebags to give you storage and turn your daily rider into a touring machine.

MC PART ID: MCB002

Provides an alternative mounting location for the front straps on an OS-BASE KTM 790/890 & HUSQVARNA NORDEN 901 when the rear footrests are removed. 

FEATURES

• Ultra durable CNC machined Nylon-6

• High impact resistance

• Uses standard fitting hardware

 WEIGHT
85g / 3oz per pair

PRODUCT CODE
KOSFEKH