MOTONE H-BOMB EXHAUST SYSTEM - T120/T100 LC - BLACK

MOTONE "THE SCOUT" LEATHER & WAXED CANVAS TOOL ROLL FULLY LOADED INCL. TOOLS

$169.00

This is THE SCOUT

One of the first major products from the Motone Leatherworks Program - made out of generous genuine veg tanned leather and thick waxed canvas

Besides the roll itself it comes fully loaded with quality tools

Stanley Slip Joint Pliers
Combination Screw Driver - Phillips/Flat Head
Set of Baum Combination Spanners - 6mm 8mm 10mm 12mm 13mm 14mm 16mm
Set of Allen Keys - 3mm 4mm 5mm 6mm 8mm 10mm

The Scout measures up 31x16x5 cm - Fully loaded + Rolled up (12x6x5" inch)

Limited Edition Item

MC Part ID: MMU901

MOTONE "THE SCOUT" LEATHER & WAXED CANVAS TOOL ROLL FULLY LOADED INCL. TOOLS

MOTONE CORTADO KIT W/ ELDORADO TAIL LIGHT FOR LC STREET/SPEED TWIN 900 / SCRAMBLER 900 / T100 / T120 / STREET CUP

$1,098.00

CORTADO NO-WELD - CUSTOM FRAME KIT - LOOP/SEAT/MUDGUARD/LIGHT

Main CORTADO Consists of these parts :

MTE210A - Seat

MTE210B - Steel Rear Loop Fixings

MTE210C - Fender - Gloss Black

MTE210D - Cutting Template

PNT - Frame Touch-Up Paint and Applicator

DDM021 - Plug and Play Rear Loom (Suitable for all tail light/3in1/Indicator Combinations)

PLUS here we are offering it in combination with the ELDORADO Light Assembly and Number Plate

MEL030 - Angle-Adjustable Mudguard ELDORADO Light Bracket

MMU613 - ELDORADO Mudguard Number Plate Bracket

MEL004 - ELDORADO Gloss Tail Light Unit (Includes down facing LEDs for License plate illumination)

Beyond this Kit you will also have to decide where you want to mount your Turn Signals

There are 2 main locations.

A - Hang off the Number Plate Bracket (For this you could use the L-CLAMPS)

B - Mount on the Top Shocks (For this we recommend the Black TRILINE Brackets)

The CORTADO Kit is a No-Weld solution to give your bike a Shorter than stock frame and a custom rear loop - you have to cut the steel frame of your bike using the cutting template provided, you will also need a drill some holes to line the loop up

Instructions are available as well as a video

MC Part ID: MTE210 (MTE210+MTE210A+PNT+DDM021+MEL030+MMU612+MEL004

MOTONE CORTADO KIT W/ ELDORADO TAIL LIGHT FOR LC STREET/SPEED TWIN 900 / SCRAMBLER 900 / T100 / T120 / STREET CUP

MOTONE CORTADO KIT W/ GORT TAIL LIGHT FOR LC STREET/SPEED TWIN 900 / SCRAMBLER 900 / T100 / T120 / STREET CUP

$1,098.00

CORTADO NO-WELD - CUSTOM FRAME KIT - LOOP/SEAT/MUDGUARD/LIGHT

Main CORTADO Consists of these parts :

MTE210A - Seat

MTE210B - Steel Rear Loop Fixings

MTE210C - Fender - Gloss Black

MTE210D - Cutting Template

PNT - Frame Touch-Up Paint and Applicator

DDM021 - Plug and Play Rear Loom (Suitable for all tail light/3in1/Indicator Combinations)

locations.

PLUS here we are offering it in combination with the GORT Light Assembly and Number Plate

MEL033 - Angle-Adjustable Mudguard Gort Light Bracket

MMU613 - Gort Mudguard Number Plate Bracket

MEL526 - Gort Gloss Tail Light Unit (Includes down facing LEDs for License plate illumination)

Beyond this Kit you will also have to decide where you want to mount your Turn Signals

There are 2 main locations:

A - Hang off the Number Plate Bracket (For this you could use the L-CLAMPS)

B - Mount on the Top Shocks (For this we recommend the Black TRILINE Brackets)

The CORTADO Kit is a No-Weld solution to give your bike a Shorter than stock frame and a custom rear loop - you have to cut the steel frame of your bike using the cutting template provided, you will also need a drill some holes to line the loop up

Instructions are available as well as a video

MC Part ID: MTE210+MTE210A+PNT+DDM021+MEL033+MMU613+MEL526

MOTONE CORTADO KIT W/ GORT TAIL LIGHT FOR LC STREET/SPEED TWIN 900 / SCRAMBLER 900 / T100 / T120 / STREET CUP

MOTONE FASTBACK CAFE RACER SEAT - BLACK

$513.00

FASTBACK Seat - Available here Black

This is our proper CAFE RACER Seat for your modern Bonneville

24 months in development

Seat works with all known configurations of tail tidies and rear mudguard setups including the stock ones however in our opinion for optimal looks it matches best with a short rear fender or a tail tidy with something like the Gort Light as pictured.

Injection molded ABS seat base - Gloss Black Automotive Paint

Injection molded high density polyurethane foam

This Seat Fits 2016 and up : Street Twin / Speed Twin 900 / Street Cup / Street Scrambler /Scrambler 900 / T100 LC / T120

This Seat is specifically designed for the above frame and will not fit other frames (like the Speed Twin 1200, etc) - but if you nag Motone, they might make a version for your bike as well ;)

MC PART ID: MSM041

MOTONE STREET TRACKER SEAT - BLACK

$513.00 $439.00 Save $74.00

Street Tracker Seat - Available here Black

Slim cut precision injection molded Base Design with slim style race cushion

THIS IS A FLAT TRACKER Style Seat for your Triumph Twin

Inspired by King Kenny Racing XS650 and the almighty Harley XR750 and far too much time leafing through the pages of Sideburn magazine - we have done a very limited edition production of these seats here. Obviously, as a race-style seat you do not have the same amount of cushioning you would have with one of our regular seats like the Viper so please bear that in mind.

The seat works with all known configurations of tail tidies and rear mudguard setups including the stock ones however in our opinion for optimal looks it matches best with a short rear fender or a tail tidy such as the "Gort" as pictured.

Injection molded ABS seat base - Gloss Black Automotive Paint

Injection-molded high-density polyurethane foam

This Seat Fits 2016 and up :

Street Twin / Speed Twin 900 / Street Cup / Street Scrambler /Scrambler 900 / T100 LC / T120

This Seat is specifically designed for the above frame and will not fit other frames (like the Speed Twin 1200 etc) - but if you nag us we might make a version for your bike as well.

If you have an air-cooled Twin 2001-2015 due to the length of the frame we haven't found a way to make a seat this style look good without chopping the frame so please bear that in mind.

MC PART ID: MSM037

MOTONE KING COBRA RIBBED SEAT FOR TRIUMPH BOBBER - BLACK

$366.00

When the Triumph Bobber first came out the first thing I wanted to change was the seat. If only it was that simple. 3 or 4 years later - this is the result - for safety we made the pan out of 4mm thick Steel which made for some fairly hefty tooling. For comfort we made the foam using a high-density polyurethane injection moulded closed-cell foam. We have done a few different stitch patterns - this one we call the King Cobra.

MC PART ID: MSM029