The Keis unisex heated jacket is hugely versatile: wear it as a heated under layer beneath a motorcycle jacket, or an outer layer when you’re off the bike but need to stay warm. Special high tech heat panels are strategically positioned on the chest, back, arms and collar to battle the cold.
Battle the elements when you’re on your motorbike in style with the Keis J501RP Premium Heated Jacket. It combines the very latest heat generation technology with a lightweight, stylish design, and is designed to be powered directly from your motorcycle’s battery.
The best features of the J501RP Keis premium heated jacket are:
Lighter, thinner construction for a more streamlined fit under your motorcycle jacket.
The very latest Micro Carbon Fibre heat pads for advanced heat radiation, providing an even layer of heat across the targeted chest, back, arms and collar areas.
More leisure pockets and a dedicated heat controller pocket, for increased convenience and ease of use.
Fitment:
Available heated jacket sizes: 46 (90CM/36IN in chest size) to60 (125CM/50IN in chest size).
Measure around the fullest part of your chest, keeping the measuring tape horizontal.
Due to the elasticated side panels you may find you need to order the chest size smaller for a snug fit. A snug fit provides the most efficient transfer of heat from the heated jacket, through your required under layer (e.g. long sleeved t-shirt), to your upper body.
What you get with the J501RP Keis heated jacket:
Keis Premium Heated Jacket J501RP
Keis Vehicle Supply Lead: Each item of Keis heated clothing is supplied with one of these Power Supply Leads. The end of the lead with the red and black battery eyelets is connected directly to the motorcycle battery - make sure to do this carefully.We advise watching the video on how to install the Keis vehicle supply lead to your motorcycle here.
The very latest heat generation technology, using Micro Carbon Fibre for extreme comfort and reliability.
The latest design in breathable lightweight soft shell fabric, with stylish elasticated side panels provide a perfect fit for men and women.
Designed to be worn as an inside layer or stylish outer jacket.
Dedicated zipped pockets for cables and Power Controller to keep things tidy and easy to find.
Convenient lifestyle pockets for increased practicality.
Strategically positioned heat panels on chest, down the back, arms and collar provide extreme warmth.
Complete with all required wiring and full easy to follow instructions.
Available in all Black, with red piping, and complete with motorcycle/vehicle wiring harness.
Current Draw 5.5A. Typical Power 66W.
Please Note:
1. While this heated jacket can be powered by a Keis Portable Battery Pack, this may not be very practical. Why? As the heated jacket draws 5.5Amps of current to heat the many different Micro Carbon Fibre heating elements, the portable battery will only last a very short time and therefore is not the most ideal power source. For example, a 2600 mAh battery running the Keis High Powered J501 Premium Heated Jacket at full power would last around 20 minutes. As such, it is advised that this heated jacket be powered from a vehicle battery connection. 2. Can also be powered via theKeis Cigarette Lighter/DIN Power Supply Lead(available as an optional accessory).
SPECIAL NOTE - You are unable to power this heated garment using a cigarette lighter/DIN power lead on a BMW motorcycle, due to the 5Amp limit to their DIN power socket (the jacket draws 5.5Amps).
Want to know more? Read the Keis Frequently Asked Questions (FAQs) here.
Keis Heated Vests and Jackets Size Guide: Measure around the fullest part of your chest, keeping the measuring tape horizontal. EU sizes in the chart below for "VESTS & JACKETS" represent the measurement around your chest in inches. Select your size based on your chest measurement.
The G601 Heated Motorcycle Gloves are Keis' best-selling motorcycle touring glove.
These heated motorcycle gloves feature 3M Thinsulate™insulation, are designed specifically for motorcycling in cold weather, and are fully certified LEVEL 2 to the new EU PPE Regulation 13594:2015.
These motorcycle gloves would suit the rider who enjoys riding throughout the cold WINTER months
The Keis G601 Heated Motorcycle Gloves have been specially designed to offer exceptional feel of the controls and dexterity, but with the added benefit of a micro carbon fibre heating panel across the back of the hands and over the top of the fingers. These gloves feature a thicker layer of 3M Thinsulate to offer improved warmth distribution throughout the glove, especially across the back of the hand and the fingers, together with hardened knuckle protection.
Features:
Independent, integral heat controller, positioned on the back of the wrist for easy operation when riding- whether you prefer to wear your gloves under or over your jacket sleeve cuffs.
Flexible hard armour across the knuckles, deliver the perfect balance between strong protection and all-day touring comfort
NEW Scaphoid guard, for maximum protection to the palm
Visor Wipe positioned on the left index finger.
3M Thinsulate™and Hipora™ waterproof membrane for premium water and wind protection
Conforms to the latest EuropeanPPE Directive EN 13594:2015, so you can be confident in their protective qualities.Please note: All personal protective equipment in Europe must clearly show whether they comply with the current PPE regulation via a label. A label showing 'CE approval' does not mean they are certified.
The G601 gloves also feature a glove battery pocket built into the glove cuff.This provides the feature of being able to power the gloves via theoptional portable glove batteries(one in each glove cuff battery pocket). SeeKeis Lithium Batteriesfor details.
Options for powering the G601 Heated Motorcycle Gloves:
1) Power these heated motorcycle gloves from the motorcycle or via a glove battery
Using the latest technology in heat generation, the G601 gloves can be powered froma 12V vehicle battery (cables supplied),one of theoptional Battery Packs, or the specially designedGlove Batteries that fit into the cuff pocket of each glove.
a) Powering your heated gloves from a motorcycle power lead:
2) Powering your heated gloves from a Keis heated vest, or heated Bodywarmer
This can be achieved using the Y-lead that comes with the gloves. Alternatively, you can also purchase the 'Glove to Vest/Bodywarmer Power Lead set' which is sold separately here.
Keis Apparel are designed to be reliable and durable, so much so that you can safely wash your heated garment. All Keis heating elements enjoy aLifetime Warranty.
How to Determine which size you'll need:
Example: if the widest part of your dominant hand, when measured around the hand and excluding the thumb, equals 9 inches, you would be glove size 9 - M.
Note:Keis recommend that you purchase one size larger than your measured glove size, for best comfort, especially if you're in between sizes. E.g. if your measurement is just over 9", rather than choosing glove size 9 - M, choose glove size 10 - L for best comfort.
The G601 heated motorcycle gloves feature the 'Male Power Plug' to connect to your chosen power source. What does the 'Male Power Plug' look like on these gloves? See image below.
If you wish to connect your G601 Heated Motorcycle Gloves to the power output plugs found within the sleeves of your pre-2020 Keis heated jacket, you will require the appropriate set of adaptors –Female to Female Power Connection Adaptor - Pair.
These adaptors are not necessary to connect your post-2020 Keis heated jacket to your G601 Keis heated motorcycle gloves, as the post-2020 garments use a power output socket (not a plug, like earlier jackets).
To watch a video on how to connect a Keis heated garment to your motorcycle click here.
Cleaning guidelines:
Our recommended method for cleaning both our leather and fabric outer gloves is to wipe the outside of the gloves with a cloth moistened with a solution prepared from S100 Technical Fabric and Leather Wash.
Repeat, rinsing and wringing out the cloth regularly in clean solution until the gloves appear clean.
Wipe over with a cloth moistened in plain water and allow to dry thoroughly at room temperature.
Finally apply S100 reproofing Spray for Fabric and Leather. We do not recommend immersion in water or washing in a washing machine.
Stay warm whilst motorcycling, hiking or riding, with the Keis Heated Vest - Premium V501RP
The Keis range of heated vests, for men and women, have heat panels on the chest, back and collar to provide some serious warmth. The latest in breathable, lightweight, soft fabrics come as standard, with elasticated side panels for a perfect fit. We especially love the dedicated zipped pockets that house the cables and controller to keep things tidy and easy to find.
For decades Keis have been at the forefront of the heated clothing market, helping to drive new ideas and technologies. Gone are the chunky cables and primitive heating elements of old – today, Keis is leading the way, reaching new levels of heat and comfort. Their Premium V501RP Heated Vest combines the very latest heat generation technology with a super lightweight, stylish design.
What will you get in your Keis heated vest, model V501RP?
Lighter, thinner construction for a more streamlined fit under your motorcycle jacket.
The very latest Micro Carbon Fibre heat pads for advanced heat radiation, providing an even layer of heat across the targeted chest and back areas.
More leisure pockets and a dedicated Heat Controllerpocket, for increased convenience and ease of use.
Fitment:
The Keis Heated Premium Vest is available in sizes 46 (90CM/36IN in chest size) to 60 (125CM/50IN in chest size). Measure around the fullest part of your chest, keeping the measuring tape horizontal.
Please Note: Due to the elasticated side panels you may find you need to order the chest size smaller for a snug fit. A snug fit provides the most efficient transfer of heat from the Keis Heated Vest, through your t-shirt, to your upper body.
What’s Included with your V501RP heated vest:
Keis V501RP Premium Heated Vest
Keis Vehicle Supply Loom: Each item of Keis heated clothing is supplied with one of these Power Supply Leads. The end of the lead with the red and black battery eyelets is connected directly to the motorcycle battery - make sure to do this carefully.We advise watching the video on how to install the Keis vehicle supply lead to your motorcycle here.
Want to know more? Read the Keis Frequently Asked Questions (FAQs) here.
Keis Heated Vests and Jackets Size Guide: Measure around the fullest part of your chest, keeping the measuring tape horizontal. EU sizes in the chart below for "VESTS & JACKETS" represent the measurement around your chest in inches. Select your size based on your chest measurement.
POWER CONTROLLER USING THE KEIS iCONTROL APP. This Keis BLUETOOTH Power Controller is suitable for all Keis Heated Jackets, Bodywarmers, and Vests, and other Keis heated garments that do not feature a built-in power controller.
Water-resistant (Ingress Protection Rating: IP65) power controller (sometimes referred to as 'heat controller') with current overload protection.
Besides being able to connect to the downloadable Keis iControl mobile App, our Bluetooth Power Controller is also 'constant' power controller, which intelligently smooths out any small input voltage and current fluctuation, and enables you to reliably control the power setting of any Keis heated garment up to a current draw of 10A.
Key features of the Keis heated clothing Bluetooth Power Controller:
Download the free Keis iControl application on the Google Play store or Apple App Store.
Constant power controller.
Three heat settings with LED indicator: 33% (green), 66% (amber), and 100% (red).
Please Note: The Keis Heat Power Controller cannot be used in series with any other integral (as in the Keis heated motorcycle gloves) or external Controller.
Part Number: W54-370889
KEIS ON/OFF SWITCH
Regular price
$17.00
Save $-17.00
Simple on off switch for users that require basic control of their Keis heated clothing or garments. Use this to quickly and easily switch your Keis heated garment on or off as you require.
Part Number: W54-370124
KEIS CIGARETTE LIGHTER / DIN POWER SUPPLY LEAD
Regular price
$27.00
Save $-27.00
Use this power lead to power your Keis heated clothing from your motorcycle cigarette or DIN socket
Provides quick and simple connection to a vehicle via the cigarette lighter socket, or twist and remove the ‘red’ end section to adapt for a DIN socket connection.
Integral fuse protection.
10A maximum loading (NOTE: not suitable for all applications. E.g. BMW DIN sockets)