HELMETS ON SALE!

Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE R22.05 motorcycle standards—the European test protocol recognized by leading helmet makers and independent safety labs as the toughest in the world.

Technical Details

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy during frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components

Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE R22.05 motorcycle standards—the European test protocol recognized by leading helmet makers and independent safety labs as the toughest in the world.

Technical Details

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy during frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components

Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE R22.05 motorcycle standards—the European test protocol recognized by leading helmet makers and independent safety labs as the toughest in the world.

Technical Details

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy during frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components

The new ECE-certified Gringo S boasts fit, finish and safety technology identical to its no-frills full-face sibling, but features a flip-up face shield for added safety and riding comfort.

Technical Details

• Injection-molded ABS plastic outer shell is rugged yet lightweight
• Three-piece Expanded Polystyrene (EPS) safety shell dissipates impact loads and enhances helmet structure for safety without compromising comfort
• Molded urethane chin bar pad dissipates energy from frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• CE-certified, injection-molded polycarbonate shield has anti-fog and anti-scratch treatments for safety and durability
• Built in recesses for various aftermarket audio & comms systems

Helmet Fitment

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. ECE-certified helmets fit more snugly than similar US DOT-compliant models to meet Europe's stricter standards for impact attenuation. NOTE: Biltwell offers accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Our ECE-certified Gringo S boasts fit, finish and safety technology identical to its full-face sibling, but features a CE-certified flip-up face shield for added safety and riding comfort.

Technical Details

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy from frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
• Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow 
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components

Our ECE-certified Gringo S boasts fit, finish and safety technology identical to its full-face sibling, but features a CE-certified flip-up face shield for added safety and riding comfort.

Technical Details

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy from frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
• Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow 
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components

Progressively styled and rigorously tested, Biltwell's finest ECE-certified helmet is a top choice for high-performance riders. Comes standard with an injection molded anti-fog clear face shield.

Technical Details

• Injection-molded ABS plastic outer shell is rugged yet lightweight
• Three-piece Expanded Polystyrene (EPS) safety shell dissipates impact loads and fortifies helmet structure without compromising comfort
• Molded urethane chin bar pad features front and side vents for cooling airflow
• CE-certified polycarbonate shield is anti-fog and anti-scratch for safety and durability
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Built in recesses for various aftermarket audio & comms systems

Progressively styled and rigorously tested, Biltwell's finest ECE-certified helmet is a top choice for high-performance riders. Comes standard with an injection molded anti-fog clear face shield.

Technical Details

• Injection-molded ABS plastic outer shell is rugged yet lightweight
• Three-piece Expanded Polystyrene (EPS) safety shell dissipates impact loads and fortifies helmet structure without compromising comfort
• Molded urethane chin bar pad features front and side vents for cooling airflow
• CE-certified polycarbonate shield is anti-fog and anti-scratch for safety and durability
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Built in recesses for various aftermarket audio & comms systems

Progressively styled and rigorously tested, Biltwell's finest ECE-certified helmet is a top choice for high-performance riders. Comes standard with an injection molded anti-fog clear face shield.

Technical Details

• Injection-molded ABS plastic outer shell is rugged yet lightweight
• Three-piece Expanded Polystyrene (EPS) safety shell dissipates impact loads and fortifies helmet structure without compromising comfort
• Molded urethane chin bar pad features front and side vents for cooling airflow
• CE-certified polycarbonate shield is anti-fog and anti-scratch for safety and durability
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Built in recesses for various aftermarket audio & comms systems

Meet the RIVALE, the latest addition to the DMD family. With such an essential design it’s easy to forget there’s real innovation and technology within. Thanks to the new tri compound fiber, DMD have achieved a super compact helmet with all the modern security standards and a comfortable fit. A full-face helmet that recalls the roaring years of Motorsport. Made in Italy, with passion.

TECHNICAL DETAILS

• Full-face helmet made of tri compound fiber (carbon-kevlar-fibreglass)
  
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation
• PIN visor closure
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then leave to air dry.

Meet the RIVALE, the latest addition to the DMD family. With such an essential design it’s easy to forget there’s real innovation and technology within. Thanks to the new tri compound fiber, DMD has achieved a super compact helmet with all the modern security standards and a comfortable fit. A full-face helmet that recalls the roaring years of Motorsport. Made in Italy, with passion.

TECHNICAL DETAILS

• Full-face helmet made of tri compound fiber (carbon-kevlar-fibreglass)
  
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation
• PIN visor closure
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then leave to air dry.

Meet the RIVALE, the latest addition to the DMD family. With such an essential design it’s easy to forget there’s real innovation and technology within. Thanks to the new tri compound fiber, DMD have achieved a super compact helmet with all the modern security standards and a comfortable fit. A full-face helmet that recalls the roaring years of Motorsport. Made in Italy, with passion.

TECHNICAL DETAILS

• Full-face helmet made of tri compound fiber (carbon-kevlar-fibreglass)
  
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation
• PIN visor closure
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then leave to air dry.

The SeventyFive is a tribute to the stylish icon of the 70’S. The helmet is a play on the design of the Racer model and the name comes from the year when the company was born. The helmet has slotted air vents to increase ventilation and it has 3 snaps to allow for fitment of DMD's snap-on visor. It has a space large enough to accommodate most goggles. This model is also compatible with DMD's new SeventyFive Goggle  and with the DMD Ghost goggles.

TECHNICAL DETAILS

• Carbon kevlar shell
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing then permit to air dry whenever possible to prevent heat damage.

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its plush inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet fashionable and stylish with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing;  then permit to air dry whenever possible to prevent heat damage.

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its plush inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet fashionable and stylish with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then permit to air dry whenever possible to prevent heat damage.

The V10 goes beyond the vintage look with new-age features such as a lightweight fiberglass shell, aerodynamic performance, emergency tabs for extra safety, detachable and washable interior, and easy bolts for a quick visor replacement. This helmet is Bluetooth compatible with Smart HJC.

INCLUDED IN THE BOX

• PINLOCK DKS476
• * V10 does not come with a smoke shield included in the box. If you'd like to purchase an accessory shield please click here.

VISOR

• HJ-41 ANTI-FOG PINLOCK® READY VISOR
• HJ-41 MIRRORED ANTI-FOG PINLOCK® READY VISOR

REPLACEMENT PARTS

• PEAK VISOR
• CHIN CURTAIN
• CHEEK PADS
• HEADLINER

LOCKING SYSTEM

• DOUBLE-D RING

FIBERGLASS SHELL

The Advanced Fiberglass Composite Shell is designed to be lightweight with a superior fit and comfort, using CAD technology.

STANDARD DOT & STANDARD ECE 22.06

Meets or exceeds ECE 22.06 approved. Testing includes energy attenuation, penetration resistance, chin strap structural integrity and labeling requirements for on-road motorcycle helmets 

Meets or exceeds DOT FMVSS 218 approved.

Testing includes energy attenuation, penetration resistance, chin strap structural integrity, and labeling requirements for on-road motorcycle helmets

HJC EASY BOLT

Quick visor replacement with safe and easy visor screws that do not require tools.

SMART HJC

SMART HJC 20B and 10B Bluetooth communication system co-developed with SENA tailored specially for HJC helmets. SMART HJC can be installed on HJC's various models and due to the compact size and aerodynamic design of the Bluetooth unit, it enhances the overall look and aerodynamic design of the shell.

*All SMART HJC devices are sold separately. If you'd like to purchase the Smart HJC 20B comm unit for your HJC V10 helmet, please click here.

3 YEAR WARRANTY

The warranty is applicable to manufacturers' defects for up to 3 years from the date of purchase or 5 years from the date of manufacturing (whichever comes first).

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell sizes: 2 (XS-M | L-XXL)
• PC Lexan Shield
• Prepared for the use of Raleri Anti-Fog system
• Double-D ring buckle
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin Wind stopper (optional accessory; not included)
• Peak included
• Chin Ventilation

SPECIFICATIONS

• Weight: 1350 grs +/- 50 grs
• Shell sizes: 2 (XS-M | L-XXL)
• Homologation: ECE/22-05, DOT e NBR-7471:2001

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell sizes: 2 (XS-M | L-XXL)
• PC Lexan Shield
• Prepared for the use of Raleri Anti-Fog system
• Double-D ring buckle
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin Wind stopper (optional accessory; not included)
• Peak included
• Chin Ventilation

SPECIFICATIONS

• Weight: 1350 grs +/- 50 grs
• Shell sizes: 2 (XS-M | L-XXL)
• Homologation: ECE/22-05, DOT e NBR-7471:2001

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell sizes: 2 (XS-M | L-XXL)
• PC Lexan Shield
• Prepared for the use of Raleri Anti-Fog system
• Double-D ring buckle
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin Wind stopper (optional accessory; not included)
• Peak included
• Chin Ventilation

SPECIFICATIONS

• Weight: 1350 grs +/- 50 grs
• Shell sizes: 2 (XS-M | L-XXL)
• Homologation: ECE/22-05, DOT e NBR-7471:2001

X.G200: CLASSY NOSTALGIA MEETS OFF-ROAD PERFORMANCE

SPECIFICATIONS

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 2 (XS-M | L-XXL)
• Double-D ring buckle
• X.MART DRY fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Peak, with 2 adjustable positions
• Chin ventilation
• Top ventilation

AVAILABLE SIZES

• Weight: 1250 grs +/- 50 grs
• Shell Sizes: 2 (XS-M | L-XXL)
• Homologations: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

X.G200: CLASSY NOSTALGIA MEETS OFF-ROAD PERFORMANCE

SPECIFICATIONS

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 2 (XS-M | L-XXL)
• Double-D ring buckle
• X.MART DRY fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Peak, with 2 adjustable positions
• Chin ventilation
• Top ventilation

AVAILABLE SIZES

• Weight: 1250 grs +/- 50 grs
• Shell Sizes: 2 (XS-M | L-XXL)
• Homologations: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

X.G200: CLASSY NOSTALGIA MEETS OFF-ROAD PERFORMANCE

SPECIFICATIONS

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 2 (XS-M | L-XXL)
• Double-D ring buckle
• X.MART DRY fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Peak, with 2 adjustable positions
• Chin ventilation
• Top ventilation

AVAILABLE SIZES

• Weight: 1250 grs +/- 50 grs
• Shell Sizes: 2 (XS-M | L-XXL)
• Homologations: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

X.VILIBY: MADE FOR THE CITY

SPECIFICATIONS

• X-MATRIX Shell (multiaxial fiberglass, 3D organic fibers, special
  aramid fibers and carbon reinforcement)
• DOT FMVSS 218 (ECE/22-05 COMPLIANT)
• Morfofit –ergonomic fitting of the cheek pads
• Easy to operate mask button and with involuntarily opening safety mechanism
• Special developed rubber sealing around the mask and the shield
  for optimum Acoustic Isolation
• PC Lexan Shield Clear with Anti-Fog position and central lock
• X-SWIFT Quick Release visor mechanism
• Visor with recessed cavity for Pinlock
• X.MART DRY Fabrics - Soft anti-sweat and anti-allergic fabric inner lining
• NEXX X.COM 2 Intercom system prepared, with “Plug&Play” easy setup
• Removable Action Camera support on top and side
  

AVAILABLE SIZES

• Weight: Carbon: 1400 g +/- 50 g
• 3 Shell sizes: XXS-S; M-L; XL-XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

THE ULTIMATE ADVENTURE HELMET. GO WILD.

New ventilation system, offers a new three position upper vent for optimal air intake; the dual-side intakes have a new positioning / angle that favors more fresh air and re-designed to allow better handling and grip with winter gloves.

New Chin ventilation intake draws more fresh air into the mouth area.

The EPS liner has been modified, adding more air channels to allow the extra air to pass over the head and out of the helmet.

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 3 (XXS-S | M-L | XL-XXXL)
• PC Lexan shield clear with Anti-Fog position and Super Lock
• X-Lock Quick Release System
• Visor with recessed cavity for Pinlock
• Panoramic Eye Port; - Inner Sunvisor
• Double D-Ring buckle
• Cheek Pads with emergency strap system V2
• Night vision – reflectors
• Special chin shape to reduce breast injury risk from frontal impacts
• X.MART DRY fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin wind stopper
• Aerodynamic shell & rim
• Air Dynamic System - 3 inlets and 2 outlets air-vents
• Chin ventilation
• NEXX X.COM Intercom system prepared
• Aerodynamic Peak, with adjustable multi-position system
• Peak extensor
• Action camera support top and sides
• Quick Strap System prepared

SPECIFICATIONS

• Weight: 1775 grs +/- 50 grs
• 3 shell sizes: XXS-S; M-L; XL-XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

THE ULTIMATE ADVENTURE HELMET. GO WILD.

New ventilation system, offers a new three position upper vent for optimal air intake; the dual-side intakes have a new positioning / angle that favors more fresh air and re-designed to allow better handling and grip with winter gloves.

New Chin ventilation intake draws more fresh air into the mouth area.

The EPS liner has been modified, adding more air channels to allow the extra air to pass over the head and out of the helmet.

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 3 (XXS-S | M-L | XL-XXXL)
• PC Lexan shield clear with Anti-Fog position and Super Lock
• X-Lock Quick Release System
• Visor with recessed cavity for Pinlock
• Panoramic Eye Port; - Inner Sunvisor
• Double D-Ring buckle
• Cheek Pads with emergency strap system V2
• Night vision – reflectors
• Special chin shape to reduce breast injury risk from frontal impacts
• X.MART DRY fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin wind stopper
• Aerodynamic shell & rim
• Air Dynamic System - 3 inlets and 2 outlets air-vents
• Chin ventilation
• NEXX X.COM Intercom system prepared
• Aerodynamic Peak, with adjustable multi-position system
• Peak extensor
• Action camera support top and sides
• Quick Strap System prepared

SPECIFICATIONS

• Weight: 1775 grs +/- 50 grs
• 3 shell sizes: XXS-S; M-L; XL-XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

THE ULTIMATE ADVENTURE HELMET. GO WILD.

New ventilation system, offers a new three position upper vent for optimal air intake; the dual-side intakes have a new positioning / angle that favors more fresh air and re-designed to allow better handling and grip with winter gloves.

New Chin ventilation intake draws more fresh air into the mouth area.

The EPS liner has been modified, adding more air channels to allow the extra air to pass over the head and out of the helmet.

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 3 (XXS-S | M-L | XL-XXXL)
• PC Lexan shield clear with Anti-Fog position and Super Lock
• X-Lock Quick Release System
• Visor with recessed cavity for Pinlock
• Panoramic Eye Port; - Inner Sunvisor
• Double D-Ring buckle
• Cheek Pads with emergency strap system V2
• Night vision – reflectors
• Special chin shape to reduce breast injury risk from frontal impacts
• X.MART DRY fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin wind stopper
• Aerodynamic shell & rim
• Air Dynamic System - 3 inlets and 2 outlets air-vents
• Chin ventilation
• NEXX X.COM Intercom system prepared
• Aerodynamic Peak, with adjustable multi-position system
• Peak extensor
• Action camera support top and sides
• Quick Strap System prepared

SPECIFICATIONS

• Weight: 1775 grs +/- 50 grs
• 3 shell sizes: XXS-S; M-L; XL-XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

THE ULTIMATE ADVENTURE HELMET. NOW LIGHTER. GO WILD.

Welcome to the new X-PRO CARBON fiber – a new technology that allows an even lighter carbon shell, with only 1450 grams! 

The X.WED2 marries the comfort of a touring helmet with the ventilation of a dirt helmet to bring you the ultimate ADV lid. Big bikes like to go fast but sometimes the terrain requires calculated and strategic low-speed prowess. In these conditions, the X.WED2 truly shines. With double, the air inlet ventilation in comparison to its predecessor, the X.WED2 does everything it can to keep you cool when you need to keep your cool. At highway speeds, head checks are more of a breeze because the peak has been engineered to catch less of the breeze. A drop-down internal sun visor enables a smooth transition from sunny morning jaunts to dimly-lit evening excursions. 

FEATURES

• X-PRO Carbon Shell
• Shell Sizes: 3 (XXS-S | M-L | XL-XXXL)
• PC Lexan shield clear with Anti-Fog position and Super Lock
• X-Lock Quick Release System
• Visor with a recessed cavity for Pinlock
• Panoramic Eye Port; - Inner Sun visor
• SV Dust Guard – for protection for the sun visor - Double D-Ring buckle
• Removable Chinstrap covers - Cheek Pads with emergency strap system V2
• Cheek Pads also include straps of the new X-HIDRO system - Night vision – reflectors
• Special chin shape to reduce breast injury risk from frontal impacts
• X.MART DRY fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin wind stopper
• Aerodynamic shell & rim
• Air Dynamic System - 3 inlets and 2 outlets air-vents
• Chin ventilation
• NEXX X.COM Intercom system prepared
• Aerodynamic Peak, with adjustable multi-position system
• Peak extensor
• Top Action camera support

SPECIFICATIONS

• Weight: 1450 g +/- 50 g
• 3 shell sizes: XXS-S; M-L; XL-XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

THE ULTIMATE ADVENTURE HELMET. NOW LIGHTER. GO WILD.

Welcome to the new X-PRO CARBON fiber – a new technology that allows an even lighter carbon shell, with only 1450 grams! 

FEATURES

• X-PRO Carbon Shell
• Shell Sizes: 3 (XXS-S | M-L | XL-XXXL)
• PC Lexan shield clear with Anti-Fog position and Super Lock
• X-Lock Quick Release System
• Visor with recessed cavity for Pinlock
• Panoramic Eye Port; - Inner Sun visor
• SV Dust Guard – for protection for the sun visor - Double D-Ring buckle
• Removable Chinstrap covers - Cheek Pads with emergency strap system V2
• Cheek Pads also include straps of the new X-HIDRO system - Night vision – reflectors
• Special chin shape to reduce breast injury risk from frontal impacts
• X.MART DRY fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin wind stopper
• Aerodynamic shell & rim
• Air Dynamic System - 3 inlets and 2 outlets air-vents
• Chin ventilation
• NEXX X.COM Intercom system prepared
• Aerodynamic Peak, with adjustable multi-position system
• Peak extensor
• Top Action camera support

SPECIFICATIONS

• Weight: 1450 grs +/- 50 grs
• 3 shell sizes: XXS-S; M-L; XL-XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

X.WRL: THE NEW ADV-INSPIRED RALLY HELMET DESIGNED FOR LIMITLESS ADVENTURE

Extremely light, comfortable and with impressive ventilation the new X.WRL (Wild Rally) is the ideal choice for those looking for a helmet for more technical and difficult terrain incursions and that can easily accommodate off-road goggles.

FEATURES

• Lighter than ever with the X-PRO Carbon Shell:  All X.WRL models are molded with the brand new X-PRO CARBON technology, which provides an incredible weight of just 1250 grams. Engineered for elite motorcyclists who demand a light-weight helmet, the new X-PRO carbon with 3K carbon fabrics is 10% lighter than other carbon shells and offers higher stiffness and ultimate strength. Everything you’d expect from one of the most advanced carbon fiber helmet technologies ever.
• Comfort comes first: the New X.WRL comes in 3 aerodynamic shell sizes (XXS-S | M-L | XL-XXXL) and 4 EPS liner size fit options to combine more compact dimensions with outstanding fit and comfort. With high-performance fabrics, refined materials and thoughtful details that will surprise you, the X.WRL interior is designed for total comfort and convenience. All liner parts, including the neck roll are removable and washable to make post-adventure cleanups simple, fast and painless. Plus, soft-touch X-Mart Dry fabrics help you to stay cool – featuring a drying rate twice as fast as normal cotton. Plus, the inner lining is made of soft anti-sweat and anti-allergic fabric.
• Neck Brace fit:  The new shell design helps to reduce weight and makes the fit compatible with the use of a neck brace.
• Two visors included and option to purchase a Transitions smart light visor: a clear visor and an Iridium Red visor for road use are both included in the box and prepared for Pinlock use. The panoramic eye port allows for an excellent field of view. Available as an optional accessory to be purchased separately, Transitions® smart light visors automatically adapt to the ideal hue in any light condition, staying clear at night and smoky when exposed to strong light, providing a safe and comfortable ride, at night or any time of day.
• Integrated Goggle Strap Holder:  One of the unique features of the X.WRL is the Goggle Strap holder integrated in the back of the helmet, allowing a better placement of off-road goggles which remain attached to the helmet when not in use.
• New Peak & Visor Button:  The new visor and peak closing button is designed to withstand the most extreme conditions, with a new shape and swivelling screw-shaped fitting, which can be easily placed or removed with no tools or with the help of a simple coin.
• Double D-Ring buckle with X-LOCK magnetic button:  All the X.WRL range helmets include a double-D Ring with the new X-LOCK magnetic button to facilitate final fastening of the chinstrap.
• Removable Chinstrap covers:  The new removable chinstrap covers that can be removed and washed, with great ease, for cleaning mud or dust after more extreme incursions.
• Cheek Pads with emergency strap system V2:  Built into each cheek pad, the Emergency Strap System V2 allows easier and gentle access to an injured rider’s head by trained medical personnel should the need arise.
• Get quick access to water: The new cheek pads with the X-HIDRO system include smart straps that allow you to attach the tube and the mouthpiece of hydration bladders. Simple to install, the cheek pads with X-HIDRO straps are included as standard in all X.WRL helmets.
• Night vision – reflectors
• Special chin shape to reduce breast injury risk from frontal impacts
• Fantastic ventilation featuring the Brow Ventilation System:  Extra vents in the eyebrow area allow increased airflow directly to the forehead and around the head. The vents have been designed to be easy to operate even with winter gloves. Also included are a chin vent and the Air Dynamic System - 5 inlets and 2 outlet air-vents
• Universal Intercom system prepared
• Aerodynamic Peak, with adjustable multi-position system
• Peak extensor:  For Highway or Off-road use, adjustable in movement and no tools required.
• Top Action camera support:  A removable support can be easily inserted in the top of the peak.

SPECIFICATIONS

• Weight: 1250 grs +/- 50 grs - X-PRO CARBON
• 3 shell sizes: XXS-S; M-L; XL-XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

X.WRL: THE NEW ADV-INSPIRED RALLY HELMET DESIGNED FOR LIMITLESS ADVENTURE

Extremely light, comfortable and with impressive ventilation the new X.WRL (Wild Rally) is the ideal choice for those looking for a helmet for more technical and difficult terrain incursions and that can easily accommodate off-road goggles.

FEATURES

• Lighter than ever with the X-PRO Carbon Shell:  All X.WRL models are molded with the brand new X-PRO CARBON technology, which provides an incredible weight of just 1250 grams. Engineered for elite motorcyclists who demand a light-weight helmet, the new X-PRO carbon with 3K carbon fabrics is 10% lighter than other carbon shells and offers higher stiffness and ultimate strength. Everything you’d expect from one of the most advanced carbon fiber helmet technologies ever.
• Comfort comes first: the New X.WRL comes in 3 aerodynamic shell sizes (XXS-S | M-L | XL-XXXL) and 4 EPS liner size fit options to combine more compact dimensions with outstanding fit and comfort. With high-performance fabrics, refined materials and thoughtful details that will surprise you, the X.WRL interior is designed for total comfort and convenience. All liner parts, including the neck roll are removable and washable to make post-adventure cleanups simple, fast and painless. Plus, soft-touch X-Mart Dry fabrics help you to stay cool – featuring a drying rate twice as fast as normal cotton. Plus, the inner lining is made of soft anti-sweat and anti-allergic fabric.
• Neck Brace fit:  The new shell design helps to reduce weight and makes the fit compatible with the use of a neck brace.
• Two visors included and option to purchase a Transitions smart light visor: a clear visor and an Iridium Red visor for road use are both included in the box and prepared for Pinlock use. The panoramic eye port allows for an excellent field of view. Available as an optional accessory to be purchased separately, Transitions® smart light visors automatically adapt to the ideal hue in any light condition, staying clear at night and smoky when exposed to strong light, providing a safe and comfortable ride, at night or any time of day.
• Integrated Goggle Strap Holder:  One of the unique features of the X.WRL is the Goggle Strap holder integrated in the back of the helmet, allowing a better placement of off-road goggles which remain attached to the helmet when not in use.
• New Peak & Visor Button:  The new visor and peak closing button is designed to withstand the most extreme conditions, with a new shape and swivelling screw-shaped fitting, which can be easily placed or removed with no tools or with the help of a simple coin.
• Double D-Ring buckle with X-LOCK magnetic button:  All the X.WRL range helmets include a double-D Ring with the new X-LOCK magnetic button to facilitate final fastening of the chinstrap.
• Removable Chinstrap covers:  The new removable chinstrap covers that can be removed and washed, with great ease, for cleaning mud or dust after more extreme incursions.
• Cheek Pads with emergency strap system V2:  Built into each cheek pad, the Emergency Strap System V2 allows easier and gentle access to an injured rider’s head by trained medical personnel should the need arise.
• Get quick access to water: The new cheek pads with the X-HIDRO system include smart straps that allow you to attach the tube and the mouthpiece of hydration bladders. Simple to install, the cheek pads with X-HIDRO straps are included as standard in all X.WRL helmets.
• Night vision – reflectors
• Special chin shape to reduce breast injury risk from frontal impacts
• Fantastic ventilation featuring the Brow Ventilation System:  Extra vents in the eyebrow area allow increased airflow directly to the forehead and around the head. The vents have been designed to be easy to operate even with winter gloves. Also included are a chin vent and the Air Dynamic System - 5 inlets and 2 outlet air-vents
• Universal Intercom system prepared
• Aerodynamic Peak, with adjustable multi-position system
• Peak extensor:  For Highway or Off-road use, adjustable in movement and no tools required.
• Top Action camera support:  A removable support can be easily inserted in the top of the peak.

SPECIFICATIONS

• Weight: 1250 grs +/- 50 grs - X-PRO CARBON
• 3 shell sizes: XXS-S; M-L; XL-XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

X.WRL: THE NEW ADV-INSPIRED RALLY HELMET DESIGNED FOR LIMITLESS ADVENTURE

Extremely light, comfortable and with impressive ventilation the new X.WRL (Wild Rally) is the ideal choice for those looking for a helmet for more technical and difficult terrain incursions and that can easily accommodate off-road goggles.

FEATURES

• Lighter than ever with the X-PRO Carbon Shell:  All X.WRL models are molded with the brand new X-PRO CARBON technology, which provides an incredible weight of just 1250 grams. Engineered for elite motorcyclists who demand a light-weight helmet, the new X-PRO carbon with 3K carbon fabrics is 10% lighter than other carbon shells and offers higher stiffness and ultimate strength. Everything you’d expect from one of the most advanced carbon fiber helmet technologies ever.
• Comfort comes first: the New X.WRL comes in 3 aerodynamic shell sizes (XXS-S | M-L | XL-XXXL) and 4 EPS liner size fit options to combine more compact dimensions with outstanding fit and comfort. With high-performance fabrics, refined materials and thoughtful details that will surprise you, the X.WRL interior is designed for total comfort and convenience. All liner parts, including the neck roll are removable and washable to make post-adventure cleanups simple, fast and painless. Plus, soft-touch X-Mart Dry fabrics help you to stay cool – featuring a drying rate twice as fast as normal cotton. Plus, the inner lining is made of soft anti-sweat and anti-allergic fabric.
• Neck Brace fit:  The new shell design helps to reduce weight and makes the fit compatible with the use of a neck brace.
• Two visors included and option to purchase a Transitions smart light visor: a clear visor and an Iridium Red visor for road use are both included in the box and prepared for Pinlock use. The panoramic eye port allows for an excellent field of view. Available as an optional accessory to be purchased separately, Transitions® smart light visors automatically adapt to the ideal hue in any light condition, staying clear at night and smoky when exposed to strong light, providing a safe and comfortable ride, at night or any time of day.
• Integrated Goggle Strap Holder:  One of the unique features of the X.WRL is the Goggle Strap holder integrated in the back of the helmet, allowing a better placement of off-road goggles which remain attached to the helmet when not in use.
• New Peak & Visor Button:  The new visor and peak closing button is designed to withstand the most extreme conditions, with a new shape and swivelling screw-shaped fitting, which can be easily placed or removed with no tools or with the help of a simple coin.
• Double D-Ring buckle with X-LOCK magnetic button:  All the X.WRL range helmets include a double-D Ring with the new X-LOCK magnetic button to facilitate final fastening of the chinstrap.
• Removable Chinstrap covers:  The new removable chinstrap covers that can be removed and washed, with great ease, for cleaning mud or dust after more extreme incursions.
• Cheek Pads with emergency strap system V2:  Built into each cheek pad, the Emergency Strap System V2 allows easier and gentle access to an injured rider’s head by trained medical personnel should the need arise.
• Get quick access to water: The new cheek pads with the X-HIDRO system include smart straps that allow you to attach the tube and the mouthpiece of hydration bladders. Simple to install, the cheek pads with X-HIDRO straps are included as standard in all X.WRL helmets.
• Night vision – reflectors
• Special chin shape to reduce breast injury risk from frontal impacts
• Fantastic ventilation featuring the Brow Ventilation System:  Extra vents in the eyebrow area allow increased airflow directly to the forehead and around the head. The vents have been designed to be easy to operate even with winter gloves. Also included are a chin vent and the Air Dynamic System - 5 inlets and 2 outlet air-vents
• Universal Intercom system prepared
• Aerodynamic Peak, with adjustable multi-position system
• Peak extensor:  For Highway or Off-road use, adjustable in movement and no tools required.
• Top Action camera support:  A removable support can be easily inserted in the top of the peak.

SPECIFICATIONS

• Weight: 1250 grs +/- 50 grs - X-PRO CARBON
• 3 shell sizes: XXS-S; M-L; XL-XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

X.WRL: THE NEW ADV-INSPIRED RALLY HELMET DESIGNED FOR LIMITLESS ADVENTURE

Extremely light, comfortable and with impressive ventilation the new X.WRL (Wild Rally) is the ideal choice for those looking for a helmet for more technical and difficult terrain incursions and that can easily accommodate off-road goggles.

FEATURES

• Lighter than ever with the X-PRO Carbon Shell:  All X.WRL models are molded with the brand new X-PRO CARBON technology, which provides an incredible weight of just 1250 grams. Engineered for elite motorcyclists who demand a light-weight helmet, the new X-PRO carbon with 3K carbon fabrics is 10% lighter than other carbon shells and offers higher stiffness and ultimate strength. Everything you’d expect from one of the most advanced carbon fiber helmet technologies ever.
• Comfort comes first: the New X.WRL comes in 3 aerodynamic shell sizes (XXS-S | M-L | XL-XXXL) and 4 EPS liner size fit options to combine more compact dimensions with outstanding fit and comfort. With high-performance fabrics, refined materials and thoughtful details that will surprise you, the X.WRL interior is designed for total comfort and convenience. All liner parts, including the neck roll are removable and washable to make post-adventure cleanups simple, fast and painless. Plus, soft-touch X-Mart Dry fabrics help you to stay cool – featuring a drying rate twice as fast as normal cotton. Plus, the inner lining is made of soft anti-sweat and anti-allergic fabric.
• Neck Brace fit:  The new shell design helps to reduce weight and makes the fit compatible with the use of a neck brace.
• Two visors included and option to purchase a Transitions smart light visor: a clear visor and an Iridium Red visor for road use are both included in the box and prepared for Pinlock use. The panoramic eye port allows for an excellent field of view. Available as an optional accessory to be purchased separately, Transitions® smart light visors automatically adapt to the ideal hue in any light condition, staying clear at night and smoky when exposed to strong light, providing a safe and comfortable ride, at night or any time of day.
• Integrated Goggle Strap Holder:  One of the unique features of the X.WRL is the Goggle Strap holder integrated in the back of the helmet, allowing a better placement of off-road goggles which remain attached to the helmet when not in use.
• New Peak & Visor Button:  The new visor and peak closing button is designed to withstand the most extreme conditions, with a new shape and swivelling screw-shaped fitting, which can be easily placed or removed with no tools or with the help of a simple coin.
• Double D-Ring buckle with X-LOCK magnetic button:  All the X.WRL range helmets include a double-D Ring with the new X-LOCK magnetic button to facilitate final fastening of the chinstrap.
• Removable Chinstrap covers:  The new removable chinstrap covers that can be removed and washed, with great ease, for cleaning mud or dust after more extreme incursions.
• Cheek Pads with emergency strap system V2:  Built into each cheek pad, the Emergency Strap System V2 allows easier and gentle access to an injured rider’s head by trained medical personnel should the need arise.
• Get quick access to water: The new cheek pads with the X-HIDRO system include smart straps that allow you to attach the tube and the mouthpiece of hydration bladders. Simple to install, the cheek pads with X-HIDRO straps are included as standard in all X.WRL helmets.
• Night vision – reflectors
• Special chin shape to reduce breast injury risk from frontal impacts
• Fantastic ventilation featuring the Brow Ventilation System:  Extra vents in the eyebrow area allow increased airflow directly to the forehead and around the head. The vents have been designed to be easy to operate even with winter gloves. Also included are a chin vent and the Air Dynamic System - 5 inlets and 2 outlet air-vents
• Universal Intercom system prepared
• Aerodynamic Peak, with adjustable multi-position system
• Peak extensor:  For Highway or Off-road use, adjustable in movement and no tools required.
• Top Action camera support:  A removable support can be easily inserted in the top of the peak.

SPECIFICATIONS

• Weight: 1250 grs +/- 50 grs - X-PRO CARBON
• 3 shell sizes: XXS-S; M-L; XL-XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001