MOLECULE ANTI-FOG improves visibility and is designed specifically to inhibit fog causing moisture on the interior of shields. Apply to the inside surface of visors, goggles or wind screens to guard against distortion.
Caution: Not for use with Stilo visor.
PIT BULL SPOOLED REAR MOTORCYCLE STAND - F0003A-000
NOTE: A $75 handling fee is applied to shipping cost due to this item being oversize/overweight.
The Spooled Rear Stand lifts spool-equipped bikes. It is width adjustable to fit virtually all spool-equipped sportbikes. The Pit Bull rear motorcycle stand was designed as a modular platform which allows SS, Standard, 999, and GP top supports to be used interchangeably. Sold complete with top supports. Spools sold separately.
NOTE: Use a Fully Adjustable Spooled Rear for a 2nd gen Busa as well as Ninja 1000 or ZX14R models with stock fender as that stand will clear the low hanging rear fender on these bikes. If you have a fender eliminator installed on those bikes, you may use this motorcycle stand on any of those bikes.
As of November 2022, all of our rear stands come standard with the 16" removable handle.
If you're not sure which stand is right for your bike, check out our bike specific navigation, view all motorcycle stands or simply contact us and ask! Pit Bull stands are known for our distinctive gold and red finish and are not available in other colors.
FITTING NOTES:
Handle Length: Fixed handle: 12", Removable handle: 16"
Width Adjustability: 10.5"-14.75", (Narrow/Vintage Version: 8"-11.25")
Height from ground, supports: 13-1/8"
NOTE: Stand will not work on '15+ Versys 650 or Vulcan S models with stock fender. Use the F0043-000, Forward Handle Spooled Rear in this case.
Instructions can be found here.
PIT BULL SS REAR MOTORCYCLE STAND W/ REMOVABLE HANDLE - F0028A-000
NOTE: A $75 handling fee is applied to shipping cost due to this item being oversize/overweight.
The SS Rear Stand can be used as a Standard or Spooled Rear Stand by flipping the top supports over. It is width adjustable to fit most modern sport bikes. The Pit Bull rear motorcycle stand was designed as a modular platform which allows SS, Standard, 999, and GP top supports to be used interchangeably. Sold complete with top supports. Spools sold separately. Pit Bull stands are known for their distinctive gold and red finish and are not available in other colors.
To see if this stand will fit your make and model of bike, please visit the Pit Bull website and enter your make and model in the drop-down menu, which will return all products that will work for your motorcycle.
NOTE: Use a Busa Rear for '09 & up Busa as well as Ninja 1000 or ZX14R models with stock fender as that stand will clear the low hanging rear fender on these bikes. If you have a fender eliminator installed on those bikes, you may use this motorcycle stand on any of those bikes.
FITTING NOTES
Handle Length: Normal handle: 12"
Width Adjustability: 10.5"-15" in spooled form, 10"-14.5" in non-spooled form
Height from ground, supports: 13-1/8"
NOTE: Stand will not work on '15+ Versys 650 or Vulcan S models with stock fender. Use the F0043-000, Forward Handle Spooled Rear in this case.
Will not work on 2nd generation Hayabusa, ZX14R, Ninja 1000, or Vulcan 650 with stock rear fender. Not ideal for ZRX1100 or ZRX1200. Use the Busa Rear for those models.
INSTRUCTIONS: click here
PIT BULL HYBRID ONE ARM REAR STAND FOR TRIUMPH SINGLE-SIDED SWING ARM (2PINS) - F0099-310
NOTE: A $75 handling fee is applied to shipping cost due to this item being oversize/overweight.
Pitbull's new Hybrid One Armed features a removable handle that allows you to use the stand with the handle going either forward or toward the rear of the bike. The handle can be installed going either to the front or back on the drive side, but only to the rear on the non-drive side of most motorcycles.
When installed on the drive side, it allows wheel removal; when installed on the non-drive side, it allows easy sprocket removal. It offers great leverage and stability and the ball bearing head makes it easy to spin the wheel for chain oiling.
Sold complete. This part number DOES include LEFT and RIGHT side pins. (Pins are also interchangeable to fit other bikes.)
Fits Triumph Single Sided Swingarms.*
*Does NOT fit the Triumph Explorer 1200
Instructions:
PIT BULL HYBRID DUAL LIFT - MOTORCYCLE FRONT STAND W/ REMOVABLE HANDLE - F0100A-200
NOTE: A $75 handling fee is applied to shipping cost due to this item being oversize/overweight.
Our Hybrid Dual Lift Stand is based upon a modular design and can be easily converted to lift from the forks OR the lower triple tree by simply swapping out a few parts (included with the Dual Lift) in a matter of seconds.
The Hybrid Dual Lift Front features 7 indexable height adjustments, which is very desirable when removing the forks on your motorcycle or even when lifting a bike with uneven forks from underneath the forks.
The Hybrid Dual Lift Front Stand is available with an optional removable handle or you can choose the extended removable handle for maximum leverage. Pit Bull stands are known for our distinctive gold and red finish and are not available in other colors.
PIT BULL FULLY ADJUSTABLE REAR STAND - SPOOLED - F0082A-000
NOTE: A $75 handling fee is applied to shipping cost due to this item being oversize/overweight.
Fully Adjustable Rear Stand - height adjustable 10.75" - 13.75", width adjustable 9.625" - 15.25" with support plates to fit spooled motorcycles.
This stand was designed for use with late-model bikes that have low hanging stock rear fenders and have not had a fender eliminator kit installed (like the 2nd gen Hayabusa, ZX14, ZX14R, Ninja 1000). This stand is also ideal for Kawasaki ZRX motorcycles to give better leverage when lifting than you would get with a traditional stand. The '16+ Triumph Thruxton 1200 also benefits from using this stand due to a significant increase in leverage.
This stand has height AND width adjustability and is available exclusively with a removable handle. If you would like to order the support plates to lift non-spooled bikes, just let us know and we can order them in for you. See them here for reference.
PIT BULL SPOOLED FORWARD HANDLE REAR MOTORCYCLE STAND - F0043A-000
NOTE: A $75 handling fee is applied to shipping cost due to this item being oversize/overweight.
The Spooled Forward Handle Rear lifts spool-equipped bikes. It is width adjustable to fit virtually all sport bikes. It is also height adjustable to set clearance under rear wheel. Same as Standard Forward Handle Rear except for interchangeable top supports. Sold complete with top supports.
Advantages to the forward handle stands: a)user can hold bike's handgrip when getting stand into place, b)no part of stand is behind bike, and c) lower bar of stand helps align axle when installing rear wheel.
NOTE: Not recommended for Moto Guzzi, Buell XB Series, Vintage or 125GP machines.
NOTE ABOUT REMOVABLE HANDLE: As of Winter 2022, this stand only comes with a removable handle. This is primarily beneficial for storage and/or shipping. This handle is not removable while the stand is in use but has become a favorite among customers who need this stand to store flat when not in use. This is also a very handy option for international shipping as it will be able to go in a flat box.
FITTING NOTES
Width Adjustability: 9-7/8" - 15-1/2"
Height from Ground: 12-3/4" - 15-1/2"
For instructions for use, click here.