DMD VINTAGE: COMPACT, LIGHT & RETRO COOL

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its plush inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet fashionable and stylish with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing;  then permit to air dry whenever possible to prevent heat damage.

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its plush inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet fashionable and stylish with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then permit to air dry whenever possible to prevent heat damage.

Meet the RIVALE, the latest addition to the DMD family. With such an essential design it’s easy to forget there’s real innovation and technology within. Thanks to the new tri compound fiber, DMD have achieved a super compact helmet with all the modern security standards and a comfortable fit. A full-face helmet that recalls the roaring years of Motorsport. Made in Italy, with passion.

Each helmet comes with a clear visor. Dark Smoke accessory visors can be purchased separately here.

TECHNICAL DETAILS

• Full-face helmet made of tri compound fiber (carbon-kevlar-fibreglass)
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation meets the new 22.06 standard 
• PIN visor closure
• Pinlock anti-fog insert lens included in the box
• Helmet weight: 1200 g +/- 50
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then leave to air dry.

Meet the RIVALE, the latest addition to the DMD family. With such an essential design it’s easy to forget there’s real innovation and technology within. Thanks to the new tri compound fiber, DMD have achieved a super compact helmet with all the modern security standards and a comfortable fit. A full-face helmet that recalls the roaring years of Motorsport. Made in Italy, with passion.

Each helmet comes with a clear visor. Dark Smoke accessory visors can be purchased separately here.

TECHNICAL DETAILS

• Full-face helmet made of tri compound fiber (carbon-kevlar-fibreglass)
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation meets the new 22.06 standard
• PIN visor closure
• Pinlock anti-fog insert lens included in the box
• Helmet weight: 1200 g +/- 50
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then leave to air dry.

The jet Retro Rainbow helmet is simple yet striking thanks to the glitter finish that complements a monochrome silver base. The fit is comfortable and meets all modern safety requirements. Suitable for those who like simple lines and an essential design on their motorcycle.

KEY FEATURES

Simple but impressive: glitter gives a special note where simplicity meets perfection.

Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.

Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell

TECHNICAL DETAILS:

• Helmet weight: 900 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
• Shell 2: L - 58 cm
• Shell 3: XL - 59/60 cm; XXL - 61 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

The jet Retro Rainbow Green helmet is simple yet striking thanks to the glitter finish that complements a monochrome green base. The fit is comfortable and meets all modern safety requirements. Suitable for those who like simple lines and an essential design on their motorcycle.

KEY FEATURES

Simple but impressive: glitter gives a special note where simplicity meets perfection.

Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.

Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell

TECHNICAL DETAILS:

• Helmet weight: 900 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
• Shell 2: L - 58 cm
• Shell 3: XL - 59/60 cm; XXL - 61 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

The jet Retro Rainbow Violet helmet is simple yet striking thanks to the glitter finish that complements a monochrome purple base. The fit is comfortable and meets all modern safety requirements. Suitable for those who like simple lines and an essential design on their motorcycle.

KEY FEATURES

Simple but impressive: glitter gives a special note where simplicity meets perfection.

Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.

Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell

TECHNICAL DETAILS:

• Helmet weight: 900 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
• Shell 2: L - 58 cm
• Shell 3: XL - 59/60 cm; XXL - 61 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

The jet Retro Deep Green helmet is part of the single-color range and comes in a shiny green finish. Safe, comfortable, and compact in size, it fits perfectly on any type of motorcycle, be it Custom, Vintage, or Cafe Racer.

KEY FEATURES

Simple but impressive: glitter gives a special note where simplicity meets perfection.

Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.

Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell

TECHNICAL DETAILS:

• Helmet weight: 900 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
• Shell 2: L - 58 cm
• Shell 3: XL - 59/60 cm; XXL - 61 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

Meet the RIVALE, the latest addition to the DMD family. With such an essential design it’s easy to forget there’s real innovation and technology within. Thanks to the new tri compound fiber, DMD have achieved a super compact helmet with all the modern security standards and a comfortable fit. A full-face helmet that recalls the roaring years of Motorsport. Made in Italy, with passion.

Each helmet comes with a clear visor. Dark Smoke accessory visors can be purchased separately here.

TECHNICAL DETAILS

• Full-face helmet made of tri compound fiber (carbon-kevlar-fibreglass)
  
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation meets the new 22.06 standard
  
• PIN visor closure
• Pinlock anti-fog insert lens included in the box
• Helmet weight: 1200 g +/- 50
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then leave to air dry.

Meet the RIVALE, the latest addition to the DMD family. With such an essential design it’s easy to forget there’s real innovation and technology within. Thanks to the new tri compound fiber, DMD has achieved a super compact helmet with all the modern security standards and a comfortable fit. A full-face helmet that recalls the roaring years of Motorsport. Made in Italy, with passion.

Each helmet comes with a clear visor. Dark Smoke accessory visors can be purchased separately here.

TECHNICAL DETAILS

• Full-face helmet made of tri compound fiber (carbon-kevlar-fibreglass)
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation meets the new 22.06 standard
• PIN visor closure
• Pinlock anti-fog insert lens included in the box
• Helmet weight: 1200 g +/- 50
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then leave to air dry.

Meet the RIVALE, the latest addition to the DMD family. With such an essential design it’s easy to forget there’s real innovation and technology within. Thanks to the new tri compound fiber, DMD have achieved a super compact helmet with all the modern security standards and a comfortable fit. A full-face helmet that recalls the roaring years of Motorsport. Made in Italy, with passion.

Each helmet comes with a clear visor. Dark Smoke accessory visors can be purchased separately here.

TECHNICAL DETAILS

• Full-face helmet made of tri compound fiber (carbon-kevlar-fibreglass)
  
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation meets the new 22.06 standard
  
• PIN visor closure
• Pinlock anti-fog insert lens included in the box
• Helmet weight: 1200 g +/- 50
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then leave to air dry.

SEVENTYSEVEN MOTORCYCLE HELMETS

Clear or Dark Smoke accessory goggles can be purchased separately here.

WHY CHOOSE SEVENTYSEVEN FULL-FACE MOTORCYCLE HELMETS?

Seventyseven full-face helmets feature an exclusive shell made from carbon kevlar, which feels lightweight yet remains highly impact-resistant. The modern design allows every rider to relive the thrill of 1970s racing. By reimagining the traditional look, we’ve transformed these helmets into genuine fashion accessories, crafted to suit any style and complete your look—without ever compromising on safety or comfort.

The style of Seventyseven DMD full-face helmets pairs perfectly with Custom, Vintage, Café Racer, Harley Davidson, Triumph, BMW, Honda, Guzzi, and Indian motorcycles.

To choose the right size, follow the sizing guide found in each product page and find the measurement that matches your head size. Remember, the helmet’s interior can be adjusted for size if the shell size remains the same.

A FEW USEFUL TIPS FOR EVERY MOTORCYCLIST:

All Seventyseven full-face helmets are equipped with a double D-ring closure to ensure maximum safety. Every helmet in the collection also features a retractable inner sun visor.

Explore full-face helmets in all available styles: basic, graphic, or metallic. Ride with confidence and style wearing a full-face helmet from the Seventyseven collection.

FEATURES

The Seventyseven helmet is entirely made of Carbon Kevlar. It features two shells to ensure maximum comfort; it is highly durable yet lightweight, an essential characteristic for motorcyclists. The ability to distribute impacts across the shell, combined with a robust yet flexible casing, makes the helmet highly resistant without adding weight. It has a retractable internal sun visor, making it practical, comfortable, and safe. The interior padding is fully removable and washable. The strap features a double D-ring closure for total safety. It is ECE approved.
Helmet weight: 1,050 g +/- 50

How to clean the helmet

The full-face Seventyseven helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and the EPS.

To clean the interior of the helmet, on the other hand, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

Key Features

Essential: essential lines and vintage design finish the full-face Seventyseven Cream helmet.
Safe and protective: it absorbs shock, cushioning even the hardest blows. Both exterior and interior materials are made with this intent.

TECHNICAL DETAILS

• Full-face helmet made entirely of carbon-kevlar
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation meets the new 22.06 standard
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then leave to air dry.

This graphic on the Jet Retro helmet is a collaboration between DMD and the iconic Chupa Chups brand. An iconic helmet that blends DMD’s creativity and craftsmanship with the playful and bold spirit of Chupa Chups.

Finished with glossy paint.

KEY FEATURES

Simple but impressive: glitter gives a special note where simplicity meets perfection.

Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.

Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell

TECHNICAL DETAILS:

• Helmet weight: 900 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
• Shell 2: L - 58 cm
• Shell 3: XL - 59/60 cm; XXL - 61 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

The SeventyFive is a tribute to the stylish icon of the 70’S. The helmet is a play on the design of the Racer model and the name comes from the year when the company was born. The helmet has slotted air vents to increase ventilation and it has 3 snaps to allow for fitment of DMD's snap-on visor. It has a space large enough to accommodate most goggles. This model is also compatible with DMD's new SeventyFive Goggle  and with the DMD Ghost goggles.

The Oro Collection takes the SeventyFive line up and kicks it up a few notches incorporating a carbon kevlar shell, Italian leather trim and an inner lining made of leather and Shalimar. It is the result of the perfect union of the best Italian leather and DMD craftsmen’s skilled hands.

TECHNICAL DETAILS

• Carbon kevlar shell
• Italian leather trim
• Inner lining made of leather and Shalimar, removable and washable.
• Padded chin strap with Double D-ring closure
• ECE Homologation
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing then permit to air dry whenever possible to prevent heat damage.

The P1 Matt Black helmet is a matte black demi-jet model. Minimalist and essential, it easily matches any type of motorcycle and style.
The compact shell ensures comfort and practicality for urban use. Certified ECE 22.06.

KEY FEATURES

The P1 Demi-Jet helmet is made entirely of fiberglass, a lightweight and durable material. It is available in two different shells for a comfortable and precise fit. Includes an integrated visor. The interior lining is fully removable and washable to ensure hygiene and comfort. The strap closes with a double D-ring system, providing safety while riding. The helmet is certified according to the European ECE 22.06 standard. Helmet weight: 1000 g +/- 50.

TECHNICAL DETAILS:

• Helmet weight: 1000 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Two different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 56 cm; M - 58 cm
• Shell 2: L - 59 cm; XL - 60 cm; XXL - 61 cm
  
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet P1 helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

The jet Retro Cipria helmet adds an elegant touch to the jet Retro collection.
It is sleek, small, safe and comfortable. The single-color pink hue, makes it unique and unmistakable. Compact in size, it fits perfectly on any type of motorcycle or scooter.

KEY FEATURES

Simple but impressive: gives a touch of elegance to your look.

Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.

Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell

TECHNICAL DETAILS:

• Helmet weight: 900 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
• Shell 2: L - 58 cm
• Shell 3: XL - 59/60 cm; XXL - 61 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

The jet Retro Ocra helmet is part of the DMD Retro helmet collection. The shell is single-color, made in the color ocra: this choice gives the helmet a refined and elegant look.

Small and compact, the jet Retro Gold helmet will embellish your look in the saddle, whatever bike you have: Custom, Vintage, Cafe Racer or scooter.

Matt finish.

KEY FEATURES

Precious: the simplicity of a single-color helmet with a bright and elegant hue.

Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.

Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell

TECHNICAL DETAILS:

• Helmet weight: 900 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
• Shell 2: L - 58 cm
• Shell 3: XL - 59/60 cm; XXL - 61 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

The jet Retro Olive Gold helmet is part of the DMD jet Retro helmet collection. The shell is single-color, made in the color olive: this choice gives the helmet a refined and elegant look.
Small and compact, the jet Retro Olive helmet will embellish your look in the saddle, whatever bike you have: Custom, Vintage, Cafe Racer or scooter.

KEY FEATURES

Precious: the simplicity of a single-color helmet with a bright and elegant hue.

Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.

Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell

TECHNICAL DETAILS:

• Helmet weight: 900 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
• Shell 2: L - 58 cm
• Shell 3: XL - 59/60 cm; XXL - 61 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

The jet Retro Matte Black helmet is part of the DMD jet Retro helmet collection. The shell is single-color, made in the color black with a matte finish: this gives the helmet a simple, yet elegant and classic look.

Small and compact, the jet Retro helmet will embellish your look in the saddle, whatever bike you have: Custom, Vintage, Cafe Racer or scooter.

KEY FEATURES

Universal: fits every style of motorcycle and rider.

Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.

Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell

TECHNICAL DETAILS:

• Helmet weight: 900 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
• Shell 2: L - 58 cm
• Shell 3: XL - 59/60 cm; XXL - 61 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

Meet the RIVALE, the latest addition to the DMD family. With such an essential design it’s easy to forget there’s real innovation and technology within. Thanks to the new tri compound fiber, DMD have achieved a super compact helmet with all the modern security standards and a comfortable fit. A full-face helmet that recalls the roaring years of Motorsport. Made in Italy, with passion.

Each helmet comes with a clear visor. Dark Smoke accessory visors can be purchased separately here.

TECHNICAL DETAILS

• Full-face helmet made of tri compound fiber (carbon-kevlar-fibreglass)
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation meets the new 22.06 standard 
• PIN visor closure
• Pinlock anti-fog insert lens included in the box
• Helmet weight: 1200 g +/- 50
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then leave to air dry.

The full-face Rivale Panther helmet features bold, custom-inspired graphics.
The glossy black base serves as a background for a high-contrast white illustration with floral details and tattoo-inspired lines, creating a strong and unmistakable look. The graphics extend along the shell and are completed with dynamic elements on the lower chin bar, emphasizing the sporty profile of the helmet. Designed to provide protection and comfort, the Panther combines style and functionality in a full-face helmet ideal for those who want to stand out without compromising safety.

Made with glossy paint.

Made in Italy, with passion.

Each helmet comes with a clear visor. Dark Smoke accessory visors can be purchased separately here.

TECHNICAL DETAILS

• Full-face helmet made of tri compound fiber (carbon-kevlar-fibreglass)
  
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation meets the new 22.06 standard
  
• PIN visor closure
• Pinlock anti-fog insert lens included in the box
• Helmet weight: 1200 g +/- 50
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then leave to air dry.

The P1 cream helmet is a demi-jet model. Minimalist and essential, it easily matches any type of motorcycle and style. The compact shell ensures comfort and practicality for urban use. Certified ECE 22.06.

KEY FEATURES

The P1 Demi-Jet helmet is made entirely of fiberglass, a lightweight and durable material. It is available in two different shells for a comfortable and precise fit. Includes an integrated visor. The interior lining is fully removable and washable to ensure hygiene and comfort. The strap closes with a double D-ring system, providing safety while riding. The helmet is certified according to the European ECE 22.06 standard. Helmet weight: 1000 g +/- 50.

TECHNICAL DETAILS:

• Helmet weight: 1000 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Two different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 56 cm;

• M - 58 cm
• Shell 2:

• L - 59 cm; XL - 60 cm; XXL - 61 cm
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet P1 helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

The jet Retro Stars helmet combines a retro aesthetic with iconic, instantly recognizable graphics. The matte black base is enhanced with gold stars across the shell, creating a bold yet elegant contrast. Perfect for those who want an essential helmet with strong personality and a high-impact graphic detail. The paint features a matte finish.

The jet Retro Stars helmet is made entirely of fiberglass. It has three shells to ensure you maximum comfort; it is very durable yet lightweight-an essential feature for motorcycle riders. It features buttons integrated with the shell to allow you to mount visors. The interior is completely removable and washable. The strap has a double ring closure to ensure total safety. It comes complete with ECE 22.06 approval. Helmet weight: 900 gr +/- 50.

KEY FEATURES

Simple but impressive: glitter gives a special note where simplicity meets perfection.

Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.

Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell

TECHNICAL DETAILS:

• Helmet weight: 900 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
• Shell 2: L - 58 cm
• Shell 3: XL - 59/60 cm; XXL - 61 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

SEVENTYSEVEN MOTORCYCLE HELMETS

Clear or Dark Smoke accessory goggles can be purchased separately here.

WHY CHOOSE SEVENTYSEVEN FULL-FACE MOTORCYCLE HELMETS?

Seventyseven full-face helmets feature an exclusive shell made from carbon kevlar, which feels lightweight yet remains highly impact-resistant. The modern design allows every rider to relive the thrill of 1970s racing. By reimagining the traditional look, we’ve transformed these helmets into genuine fashion accessories, crafted to suit any style and complete your look—without ever compromising on safety or comfort.

The style of Seventyseven DMD full-face helmets pairs perfectly with Custom, Vintage, Café Racer, Harley Davidson, Triumph, BMW, Honda, Guzzi, and Indian motorcycles.

To choose the right size, follow the sizing guide found in each product page and find the measurement that matches your head size. Remember, the helmet’s interior can be adjusted for size if the shell size remains the same.

A FEW USEFUL TIPS FOR EVERY MOTORCYCLIST:

All Seventyseven full-face helmets are equipped with a double D-ring closure to ensure maximum safety. Every helmet in the collection also features a retractable inner sun visor.

Explore full-face helmets in all available styles: basic, graphic, or metallic. Ride with confidence and style wearing a full-face helmet from the Seventyseven collection.

FEATURES

The Seventyseven Cream helmet is entirely made of Carbon Kevlar. It features two shells to ensure maximum comfort; it is highly durable yet lightweight, an essential characteristic for motorcyclists. The ability to distribute impacts across the shell, combined with a robust yet flexible casing, makes the helmet highly resistant without adding weight. It has a retractable internal sun visor, making it practical, comfortable, and safe. The interior padding is fully removable and washable. The strap features a double D-ring closure for total safety. It is ECE approved.
Helmet weight: 1,050 g +/- 50

How to clean the helmet

The full-face Seventyseven Cream helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and the EPS.

To clean the interior of the helmet, on the other hand, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.

Key Features

Essential: essential lines and vintage design finish the full-face Seventyseven Cream helmet.
Safe and protective: it absorbs shock, cushioning even the hardest blows. Both exterior and interior materials are made with this intent.

TECHNICAL DETAILS

• Full-face helmet made entirely of carbon-kevlar
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation meets the new 22.06 standard
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then leave to air dry.

The jet Retro Tigre helmet is made entirely of fiberglass. It has three shells, to guarantee you maximum comfort; it is very durable, but at the same time lightweight: an essential feature for motorcycle riders. It features buttons integrated with the shell to allow you to mount visors. The interior is fully removable and washable. The strap has a double ring closure to ensure total safety. It comes complete with ECE 22.06 approval. 

Helmet weight: 900 gr +/- 50.

KEY FEATURES

Safe and protective: absorbs shocks, cushioning even the hardest blows. Both outer and inner materials are made with this in mind. Meets the latest ECE 22.06 standard.

Does the helmet give a “big head” effect? No, the strength of DMD helmets is precisely the compact size of the shell

TECHNICAL DETAILS:

• Helmet weight: 900 gr +/- 50.
• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm; M - 56/57 cm
• Shell 2: L - 58 cm
• Shell 3: XL - 59/60 cm; XXL - 61 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE 22.06 Homologation

PRODUCT CARE

• The jet Retro helmet is made of materials that could be damaged if cleaned with common solvents on the market. Therefore, we recommend using a sponge or cloth and moistening the surface of the shell with warm water and mild soap.
• Let it dry at room temperature, without exposing it to overly aggressive heat sources, so as not to damage the shell, interior and EPS.
• To clean the interior of the helmet, hand washing is recommended, dabbing it with a washcloth. Again, let it dry at room temperature.