MOTORCYCLE PARTS

Motone Quality - HIGH PRESSURE PRECISION DIE CAST

This cover is for the ACG (What was once known as the "Points" Cover on the Vintage Meriden Triumphs) - The smaller of the two round engine covers.  Clutch Side Badges/Covers are also available. 

Wrinkle Black Paint with Contrast Mirror Polished Outer Surface 

Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today: Street Twin, Street Cup, Street Scrambler, Scrambler 1200, Bonneville Bobber, T100 , T120, Thruxton, Speedmaster, Speed Twin

Motone Quality - High Pressure Die Cast Engine Clutch Side Engine Cover

Union Jack Design with polished fins - Black paint on lower face to match the factory black used throughout the bike

Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today: Street Twin, Street Cup, Street Scrambler, Scrambler 1200, Bonneville Bobber, T100 , T120, Thruxton, Speedmaster, Speed Twin

Union Jack Clutch/Primary Side Engine Cover/Badge suitable for all the 900 and 1200cc Triumph Twins from 2016 to now.

Motone Quality - High Pressure Precision Die Cast and finished in black to match the engine paint. 

Precision fit part - Bolt on - Fit at home 

Fits all the new twins : Street Twin, Street Cup, Street Scrambler, T100, T120, Scrambler 1200, Speed Twin, Bobber, Speedmaster

Motone Quality - HIGH PRESSURE PRECISION DIE CAST

This cover is for the ACG (What was once known as the "Points" Cover on the Vintage Meriden Triumphs) - The smaller of the two round engine covers.  Clutch Side Badges/Covers are also available.  

Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today: Street Twin, Street Cup, Street Scrambler, Scrambler 1200, Bonneville Bobber, T100 , T120, Thruxton, Speedmaster, Speed Twin

These are the Exacta Mounts - designed for the situation where you want to fit a bar end mirror to your handlebar but you have no free space at the end of the bar to clamp the mirror.

SOLD IN PAIRS (2 pcs)

These brackets slide up inside your hollow bar with a design that expands tight when the bolt is screwed down providing a solid Mount for the bar end mirror of your choice (we might have some that can help you there - check out the TRILINE or TURISMO) 

For this reason they will work in any handle bar so long as the internal tube is clear. Please make sure this is the case before ordering!

MC PART ID: MMU502

MC PART ID: OTS016

1. TURN SIGNAL (INDICATORS)
2. BRAKE LIGHT
3. RUNNING LIGHT (TAIL LIGHT)

SOLD HERE: PAIR [2 LIGHTS]

• ECE R148 - LAB TESTED FULLY COMPLIANT ROAD LEGAL
• CUSTOM PCB 
• SMOKED LENS
• FULL METAL JACKET - ALUMINIUM HOUSING
• ORSAM SMD LED
• BRAIDED CABLES TERMINATING IN 3.9MM BULLET CONNECTORS
• WATERPROOF
• RUBBER BOOT CABLE TIDY 
• INPUT: DC 13.5 V

• SPECS

  • Indicator Light Power : 3.4 W 
  • Running Light Power : 2.0 W 
  • Brake Light Power: 4.7 W 
  • PMMA LENS (TIR Optical Lense tech)
  • SIZE W 44 x H 87.5 x D 6.6 mm
  • MOUNTED ONTO A M8 THREAD 

• There are 4 Wires exiting each Light Unit - Functionality is as follows:

  RED - BRAKE LIGHT

  YELLOW - INDICATOR 

  BROWN - RUNNING LIGHT

  BLACK - EARTH NEUTRAL 

• Brackets for front of bike:
• Billet Adapter Brackets mount M8 Indicators such as the PICO direct to stock Triumph Indicator position (2016 and up bikes)
• Clampit Brackets to mount to front fork 41mm (other sizes also coming)
• Boomerang Bracket - fits on the bottom yoke suitable for the Street Twin/Speed Twin 900 
• Brackets for rear of bike:
• V2 Shock Mount Brackets to mount to rear shock
• Under Seat Brackets LC Triumph - Use the bolt holes under the rear of the seat to fit Indicators towards rear of frame - Liquid Cooled Bonneville so 2016 to 2025+)
• Under Seat Brackets AC Triumph - Under seat brackets for the aircooled (2001-2015) Bonnevilles
• Triline Brackets to mount to Rear Shock
• Ajax - Designed specifically for the Triumph Bobber these brackets allow you to fit signals onto the rear of the bike using the airbox bolts
• Number Plate Brackets - Adapter Brackets that allow the lights to be fit direct to your rear number plate bracket without needing to drill any holes etc 

Wiring Adapters

• Please note if you have one of our tail tidies or rear loom adapters they would already terminate in a 3.9mm Bullet so plug and play from there on
  
• Each Light Unit has 4 Wires that terminate in a standard Japanese spec 3.9mm Bullet - The Red wire is the Brake Light, the Yellow wire is the Running Light, the Brown Wire is the Indicator Light and the Black is the Earth/Neutral
• We have a Wiring Loom adapter for the Triumph Bobber / Scrambler 1200 that can be run directly with these MULTI 3in1 Indicators available here part code DDM016  
• If you have a 2016 to now T100/T120/Street Scrambler/Street Twin/Speed Twin 900/Speed Twin 1200 Eur4 they all use DDM021 

1. TURN SIGNAL (INDICATORS)
2. BRAKE LIGHT
3. RUNNING LIGHT (TAIL LIGHT)

• ECE R148 - LAB TESTED FULLY COMPLIANT ROAD LEGAL
• CUSTOM PCB 
• FULL METAL JACKET - ALUMINIUM HOUSING
• ORSAM SMD LED
• BRAIDED CABLES TERMINATING IN 3.9MM BULLET CONNECTORS
• WATERPROOF
• RUBBER BOOT CABLE TIDY 
• INPUT: DC 12v

• Indicator Light Power: 1.2W 
• Running Light Power: 0.5W 
• Brake Light Power: 1.2W 
• Indicator Brightness: 77 Cd
• Running Light Brightness: 9 Cd
• Brake Light Brightness: 50 cd
• PMMA LENS (TIR Optical Lense tech)
• SIZE W 18 x H 44 x D 25.5 mm
• MOUNTED ONTO A M8 THREAD 

• RED - BRAKE LIGHT
• YELLOW - INDICATOR
• BROWN - RUNNING LIGHT
• BLACK - EARTH NEUTRAL 

Combine with various Motone brackets and adapters to fit anywhere on your bike: 

• Brackets for front of bike:
• Billet Adapter Brackets mount M8 Indicators such as the PICO direct to stock Triumph Indicator position (2016 and up bikes)
• Clampit Brackets to mount to front fork 41mm (other sizes also coming)
• Boomerang Bracket - fits on the bottom yoke suitable for the Street Twin/Speed Twin 900 
• Brackets for rear of bike:
• V2 Shock Mount Brackets to mount to rear shock
• Under Seat Brackets LC Triumph - Use the bolt holes under the rear of the seat to fit Indicators towards rear of frame - Liquid Cooled Bonneville so 2016 to 2025+)
• Under Seat Brackets AC Triumph - Under seat brackets for the aircooled (2001-2015) Bonnevilles
• Triline Brackets to mount to Rear Shock
• Ajax - Designed specifically for the Triumph Bobber these brackets allow you to fit signals onto the rear of the bike using the airbox bolts
• Number Plate Brackets - Adapter Brackets that allow the lights to be fit direct to your rear number plate bracket without needing to drill any holes etc 

Wiring Adapters

• Please note if you have one of our tail tidies or rear loom adapters they would already terminate in a 3.9mm Bullet so plug and play from there on
• Each Light Unit has 4 Wires that terminate in a standard Japanese spec 3.9mm Bullet - The Red wire is the Brake Light, the Yellow wire is the Running Light, the Brown Wire is the Indicator Light and the Black is the Earth/Neutral
• We have a Wiring Loom adapter for the Triumph Bobber / Scrambler 1200 that can be run directly with these MULTI 3in1 Indicators available here part code DDM016  

MOTONE PICO LED T/S : TURN SIGNAL / INDICATORS

SOLD HERE : PAIR [2 TURN SIGNALS]

• ECE R50 - LAB TESTED FULLY COMPLIANT ROAD LEGAL
• CUSTOM PCB 
• FULL METAL JACKET - ALUMINIUM HOUSING
• ORSAM SMD LED
• BRAIDED CABLES TERMINATING IN 3.9MM BULLET CONNECTORS
• WATERPROOF
• RUBBER BOOT CABLE TIDY 
• PMMA LENS
• SIZE W 18 x H 44 x D 25.5 mm
• MOUNTED ONTO A M8 THREAD 

Combine with various Motone brackets and adapters to fit anywhere on your bike: 

• Brackets for front of bike:
• Billet Adapter Brackets mount M8 Indicators such as the PICO direct to stock Triumph Indicator position (2016 and up bikes)
• Clampit Brackets to mount to front fork 41mm (other sizes also coming)
• Boomerang Bracket - fits on the bottom yoke suitable for the Street Twin/Speed Twin 900 
• Brackets for rear of bike:
• V2 Shock Mount Brackets to mount to rear shock
• Under Seat Brackets LC Triumph - Use the bolt holes under the rear of the seat to fit Indicators towards rear of frame - Liquid Cooled Bonneville so 2016 to 2025+)
• Under Seat Brackets AC Triumph - Under seat brackets for the aircooled (2001-2015) Bonnevilles
• Triline Brackets to mount to Rear Shock
• Ajax - Designed specifically for the Triumph Bobber these brackets allow you to fit signals onto the rear of the bike using the airbox bolts
• Number Plate Brackets - Adapter Brackets that allow the lights to be fit direct to your rear number plate bracket without needing to drill any holes etc 

Wiring Adapters

Please note if you have one of our tail tidies or rear loom adapters they would already terminate in a 3.9mm Bullet so plug and play from there on.

• DDM011: Wiring Adapter to Convert to OE Triumph Wiring Plugs (2016 to 2025+)
• DDM004: Wiring Adapter to Convert to OE Triumph 2001-2015
• DDM014: Wiring Adapter for Royal Enfield 650
• DDM005: Wiring Adapter for Royal Enfield Meteor/Hunter 350

Sold as a pair - these adapters allow Motone and other aftermarket turn signals to be plugged straight into the stock factory loom, no splicing of cables required.

Suitable for use on all the liquid-cooled (LC) Bonnies from 2016 and up:

Street Twin, T100, T120, Bobber, Street Cup, Thruxton S, Thruxton R

Each pair of adapters will work with a pair of turn signals. Therefore, if you're installing four signal lights, order a quantity of two (2) to receive two pairs.

 Custom CNC milled from aviation grade billet 6061t aluminium.

Includes all stainless fixings/washers.

Available here Anodised Black

Fits in front fork assembly either behind or in place of regulator below the headlight.

You do not have to relocate the regulator to fit this part.  

SUITABLE FOR USE WITH AFTERMARKET INDICATORS WITH 8-10mm THREADS

FITS LC (LIQUID COOLED) BONNEVILLE T100/T120/STREET TWIN/STREET CUP : 2016/2017 & UP

Sold as a pair. 

These are the Ajax the latest edition of our Triline Indicator Brackets specifically designed for the Triumph Bobber

Having seen various adaptations on the road utilizing some of our existing turn signal brackets plus various spacers etc we thought we would design a specific version for the Bobber, especially with our upcoming Icon and Pico turn signals which also come in a 3in1 form (Brake/Running/Turn Signal) 

These brackets fit using the existing air box screws at the rear of the frame and provide a mounting point where you can fit any 8 or 10mm Turn signal or Indicator.

They are also spaced horizontally so that the legal (UK/EU) distance between left and right signals is maintained

We have formed these out of high pressure die-cast aluminum and they come with stainless bolts and fixings 

Sold as a pair. 

These are the latest brackets we have made allowing you to fit indicators to the rear of your bike using the 2 bolt holes on either side at the top of your frame.

These can be run in various combinations with our parts, depending on the rear mudguard of your bike and which make indicators you have and the length of threads they run

As is we have designed the holes to bolt on using any 

• Indicators with 8mm Threads
• Indicators with 10mm Threads
• OEM Triumph LED Indicators

As well as the above if you have a high and wide rear fender and want to fit with indicators that have particularly long threads, or you simply want to space your indicators out wider apart then you can fit this part in combination with our Billet Indicator Adapters ADT002 (for 8mm Indicators), or ADT003 (for 10mm Indicators)

Fits

• Street Twin
• Street Cup
• Street Scrambler
• T100 LC
• T120
• Thruxton 1200
• Speed Twin

Note if you have another accessory using these holes already it may still be possible to fit them both concurrently - use some washers under the seat latch to raise it up a few mm in this instance

Ladies and Gentlemen these are the Clampits  - SOLD AS A PAIR 

Built out of High Pressure Die Cast Aluminium (we also have a similar version in Aluminum for you Americans) these clamps wrap around your fork - in this case any 41mm fork - and you can bolt on your Indicator - they will work with Indicators that have 8 or 10mm sized threads (so any of the ones we make and most all of the ones out in the world) 

Depending on your bike and the overall look you are going for you may wish to position your indicators at the front or rear side of the fork - these work either way around. 

Other versions for other fork sizes are also in development 

Common Bikes with 41mm Forks Include - Triumph Bonneville, T100, T120, Street Twin, Scrambler 900, Mag Wheel, Royal Enfield Interceptor, new Honda CB350, and many more 

Sold as a pair. 

Motone TRILINE Turn Signal / Indicator brackets in a BLACK finish.  Sold as a pair with 2 x M8x30mm stainless mounting bolts

The brackets are designed to mount flush on the top eyelets of the rear shocks.  At the other end of the bracket there is a hole which will take the bolt from your turn signal (suitable for any size 8mm or 10mm thread - both work fine)

They fit many makes of motorcycle - we supply here with a bolt that is suitable for use on a lot of shocks including all of the modern Triumph twins.

FITS ALL YEARS HINKLEY BONNEVILLE T100/SE/SCRAMBLER/THRUXTON/STREET CUP/T120  : 2001-Present 

For non Triumph use please note - The supplied bolts have 30mm of thread, the stock bolts on the triumph twins have 20mm, so if you are using on a non-triumph or custom application please measure whatever bolts your shocks are currently using and add an extra 10mm to the length and thats how long bolts you will need. 

MC PART ID: MMU005

Sold as a pair. 

CNC Machined out of Billet Aluminium and Anodised Black, these adapters fit directly onto the stock Indicator Mounts to allow you to fit an aftermarket Indicator with a regular 10mm Thread. The final position angle of your indicator is controlled by a stainless grub screw which locks the Indicator light in place.

This version (ADT002) is for Indicators/Turn Signals with 10mm Threads (Such as Motone Billet Indicators, MC PART ID NXM002B)

We also have an alternative version for Indicators with 8mm threads (e.g. Rizoma, Kellerman) which is part ADT002.

Fitment:

Suitable for Street Twin, T100, T120, Thruxton, Bobber, Street Cup, Street Scrambler, Speed Twin 

These also work with Street Triple and Speed Triple and other modern Triumph motorcycles

Sold as a pair. 

CNC Machined out of Billet Aluminium and Anodised Black, these adapters fit directly onto the stock Indicator Mounts to allow you to fit an aftermarket Indicator with a regular 8mm Thread. The final position angle of your indicator is controlled by a stainless grub screw which locks the Indicator light in place.

This version (ADT002) is for Indicators/Turn Signals with 8mm Threads (Such as Rizoma / Kellermann etc)

We also have an alternative version for Indicators with 10mm threads (e.g. Motone Billet Indicators) which is part ADT003.

Fitment:

Suitable for Street Twin, T100, T120, Thruxton, Bobber, Street Cup, Street Scrambler, Speed Twin 

These also work with Street Triple and Speed Triple and other modern Triumph motorcycles

Sold as a pair. 

New Shock mount 2.0 Indicator brackets will work on many different types, makes, and models of bikes with capability to mount 

• Pretty much Any known Aftermarket Indicator out there  (8 or 10mm Thread no problem)
• Triumph OEM (Factory Original) Type Indicators 

Can be fit on outside or inside of Shock depending on the type of shock you have.

Includes blanking plates if not using the OEM holes.  

Each bracket can be fit on either side of the bike 

Made out of Stainless Steel and Powder Coated in Black

New License Plate Indicator L-Clamp Brackets

L shaped they clip into the slots that you would normally use to Bolt your Number Plate to the Plate Hanger/Bracket (e.g. Motone Round Tail Light Bracket OR Motone GORT Tail Light Bracket)

Indicator brackets work with

• All Aftermarket Indicator out there  (8 or 10mm Thread no problem)
• Triumph OEM (Factory Original) Type Indicators 

Includes blanking plates if not using the OEM holes

Made out of Stainless Steel and Powder Coated in Black

Sold as a pair.

This is the MOTONE SPEED VIPER SEAT MK.II  :

• INJECTION MOLDED BASE
• INJECTION MOLDED HIGH DENSITY POLYEURETHENE FOAM for max comfort
• RIBBED DOUBLE STITCH PATTERN (See Mk.I for Single Stitch)

ONLY FITS SPEED TWIN 1200 (ALL VARIANTS 2019 to NOW, both EUR4 and EUR5 variants)

We have other seats for other bikes including the Speed Twin 900 which has a different subframe.

Bolt on Replacement for the Stock Riser Clamp assembly which works on any of the Triumph Bonneville family on which you want to run Fat Bars (that is to say bars which are 28.6mm dia in the centre and taper to regular 22mm on the ends).

We originally designed the Up-And-Over Kit to give you a one inch rise and a one inch pull back over standard bar position.  This is about as far as you can take the stock bars without having to install longer cables.

Easy to fit at home with basic tools. 

Note this will work with the Stock bars on the Street Scrambler or the Scrambler 1200 or the Speed Twin 1200 Eur 4 which all have Fat Bars out of the box, it will also work when converting other bikes into using Fat Bars

note that if you have Eur 5 Speed Twin 1200 (with upside down forks) these wont fit but we have a new version coming 

These are the LAMPREY - Precision Cast in Aluminium to match the exact contours on the underside of the stock Triumph BOBBER Seat Base - they also allow the wiring to be nicely hidden o the wires can exit towards the front of the seat

They are designed to work with our PICO or ICON signal lights of the 3in1 Variation (Indicator, Brake, Running Lights) though in fact you can also mount other brand Lights should you wish to - the hole is designed for a M8 Thread

Sold as a Set of 2 pieces (1 Left and 1 Right sided piece)

This version - BRUSHED to match stock seat 

These are the LAMPREY - Precision Cast in Aluminium to match the exact contours on the underside of the stock Triumph BOBBER Seat Base - they also allow the wiring to be nicely hidden o the wires can exit towards the front of the seat

They are designed to work with our PICO or ICON signal lights of the 3in1 Variation (Indicator, Brake, Running Lights) though in fact you can also mount other brand Lights should you wish to - the hole is designed for a M8 Thread

Sold as a Set of 2 pieces (1 Left and 1 Right sided piece)

This version - BLACK

Fits any LC 2016 and up Triumph Twin 

SIDEKICK SLIM - This is the SLIM version for Vertical Orientation USA Spec License Plates 

We have made several versions of this kit - this version includes a license plate light but no tail light, we also have a tail light version

Kits Consists of

• Axle Plate Bracket - Forged Stainless Steel (MMU607)
• SLIM USA SPEC Side Mount Plate Mount Kit - Laser Cut Aluminium - Black Powder Coat (MMU618)
• The Pillbox - our E-Marked Street Legal Micro LED License Plate Light - 6061 Billet Aluminium and 120cm of wiring cable with 3.9mm bullet connector terminals 

The Number plate itself mounts to Axle Plate Bracket using counter sunk screws which are provided - the plate has counter sunk holes at various levels so you can set it at a suitable height for the size of your number plate on your bike. 

The Pillbox Light is designed to Plug and Play directly into any Motone rear wiring loom plug and play adapters

For Example this one DDM016 for the BOBBER/Speedmaster/Scramber 1200/Speed Twin 1200 EURO4 

Or For Street Twin/Speed Twin 900/T100/T120 this one DDM021

Or Speed Twin 1200 EURO5 This one DDM017

MC Part ID: MMU607+MMU618+MLP001

Fits any LC 2016 and up Triumph Twin 

Sold here is the axle plate bracket ONLY (circled in red in the product image), made of forged stainless steel and powder-coated black. You can fit your own plate to the bracket if you have one and attach the pillbox plate illumination light (MLP001) - sold separately - if you wish.

MC Part ID: MMU607

Motone Rad Guard - Special Version ONLY for the Triumph Scrambler 1200 (all variants X, XE, XC ETC) 

Casing precision milled out of 6061T Billet Aluminium and then anodized a matte black.

Rear grill is laser cut out of steel and finished in a black powder coat.  

Full assembly comes ready to fit to your bike as a complete kit. 

FASTBACK Seat  - Available here Black

This is our proper CAFE RACER Seat for your modern Bonneville

24 months in development 

Seat works with all known configurations of tail tidies and rear mudguard setups including the stock ones however in our opinion for optimal looks it matches best with a short rear fender or a tail tidy with something like the Gort Light as pictured. 

Injection molded ABS seat base - Gloss Black Automotive Paint

Injection molded high density polyurethane foam 

This Seat Fits 2016 and up : Street Twin / Speed Twin 900 / Street Cup / Street Scrambler  /Scrambler 900 / T100 LC / T120

This Seat is specifically designed for the above frame and will not fit other frames (like the Speed Twin 1200, etc) - but if you nag Motone, they might make a version for your bike as well ;)