MOTORCYCLE PARTS

MC PART ID: KNS004

CORTADO NO-WELD - CUSTOM FRAME KIT - LOOP/SEAT/MUDGUARD/LIGHT

Main CORTADO Consists of these parts : 

MTE210A - Seat

MTE210B - Steel Rear Loop Fixings

MTE210C - Fender - Gloss Black

MTE210D - Cutting Template 

PNT - Frame Touch-Up Paint and Applicator 

DDM021 - Plug and Play Rear Loom (Suitable for all tail light/3in1/Indicator Combinations) 

 locations. 

PLUS here we are offering it in combination with the GORT Light Assembly and Number Plate

MEL033 - Angle-Adjustable Mudguard Gort Light Bracket 

MMU613 - Gort Mudguard Number Plate Bracket

MEL526 - Gort Gloss Tail Light Unit (Includes down facing LEDs for License plate illumination) 

Beyond this Kit you will also have to decide where you want to mount your Turn Signals 

There are 2 main locations:

A - Hang off the Number Plate Bracket (For this you could use the L-CLAMPS)

B - Mount on the Top Shocks  (For this we recommend the Black TRILINE Brackets)

The CORTADO Kit is a No-Weld solution to give your bike a Shorter than stock frame and a custom rear loop - you have to cut the steel frame of your bike using the cutting template provided, you will also need a drill some holes to line the loop up

Instructions are available as well as a video 

MC Part ID: MTE210+MTE210A+PNT+DDM021+MEL033+MMU613+MEL526

Gort!

Full SMD-LED circuit board.

Works as Running Light, Brake Light and Number plate illumination through window on underside.

Diecast Aluminium with a Gloss Black Finish 

Fully E-Marked for Homologation.

Wired as follows :

Yellow = RUNNING light

Red = STOP light

Black = Earth

MC PART ID: MEL526

Powder coated Black these brackets are designed to work with the GORT LIGHT 

This will work with the GORT Light on its own - or it also can slide in between the GORT light and the Angle-Adjustable Gort Light Fender Brackets 

Often used in Combination with our Rear Mudguards etc

Also check out the L-CLAMPS if you want to bolt some Indicators to the License Plate bracket 

MC PART ID: MMU613

Suitable for the GORT Light Only 

Includes Rubber Gasket + Stainless Mounting Bolts

Diecast Aluminium with a GLOSS BLACK finish

This is the Adjustable Angle version - useful especially on custom bikes with mudguards not at a fixed angle 

Please Note there is a slide in License Plate Bracket Specific for this Angle-Adjustable Bracket, available here. Gort light in gloss black can also be purchased separately here.

MC Part ID: MEL033

Kit Includes

• Bracket Milled out of Aviation Billet Aluminium with facility for ABS Sensor and Caliper in 12 o'clock position (instead of 6 o'clock stock)
• Braided Lengthened Stainless Steel Brake Line Hose In Stainless Steel 
• Banjos/Bolts/Copper Washers

This bracket can be fit to any of the Street Twin/Speed Twin 900, Street Scrambler 900, Street Cup, T100 and T120 Bikes from 2016 and Up. Note: compatible with Street Twin/Speed Twin 900 up to year 2024 only.

It is compatible with the stock ABS sensor 

Please note - in order to bleed the ABS hose you need to submit the correct command to the ECU on board the bike, to do this besides doing it at a dealer you can do it at home using a suitable OBD2 device that works with either TUNEecu (Android phone or tablet) or DealerTool software 

MC Part ID: MTE060

The Peerless

Formed from High Pressure Die Cast Aluminium and finished in our signature wrinkle powder coat Black 

These are Bolt On Covers that fit over the top of your existing Speedo Dials in minutes

Suitable for

• T120 (All Years)
• T100 LC (All Years 2017-Now) 
• Street Cup (All Years)
• Thruxton 1200/R/RS (All Years)
• Speed Twin 1200 (All Years)

MC Part ID: MMU597

PRESENTED HERE IN POLISHED Finish 

This is our latest creation, the JETSON our Dished Low-profile Gas Cap for your pride and joy 

The JETSON is actually works as both a VENTED and NON-VENTED Gas Cap as it can be assembled with the Vents open or closed, which means besides working on any modern Triumph Twin its also works on custom choppers, Harley Tanks as well as the BMW R18

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for grip

FITS ALL YEARS BONNEVILLE THRUXTON, AMERICA, T100, SPEEDMASTER, SE, SCRAMBLER, BOBBER, STREET CUP, STREET SCRAMBLER, T120 : 2001 to 2025. Note: Only suitable for Street Twin/Speed Twin 900 and Speed Twin 1200 up to 2024.

** NOT SUITABLE FOR 2025 TRIUMPH SPEED TWIN 900/1200 NOR ANY OF THE 2026+ TRIUMPH MODELS, CURRENTLY UNDER DEVELOPMENT **

TRIUMPHS WITH STOCK FAUX-MONZAS (SPEED TWIN 1200/SCRAMBLER 1200/THRUXTON 1200) we would recommend the Billet Gas Cap NXS006 and the Adapter Ring (BLACK or POLISHED) instead rather than this one

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018,SPORTSTER, 48, IRON ETC

MC PART ID: MMU654

The Speed Cuff

Formed from Hot Forged Billet Brass and then Polished (you can easily take the shine off if you prefer that look)  

These are Bolt On Covers that fit over the top of your existing Speedo Dials in minutes

Suitable for

• T120 (All Years)
• T100 (All Years 2017-Now) 
• Street Cup (All Years)
• Thruxton 1200/R/RS (All Years)
• Speed Twin (All Years)

MC Part ID: MMU582

Hot Forged out of Solid Brass, Machined and then Mirror Polished - The Guvnors are designed to complement the Brass Boss Yoke Nut

Please Check Specific Bike Model and Year before purchasing as these as they vary per bike.

This version is for

• T120
• Speed Twin
• Thruxton 1200,
• Speedmaster 1200 (2018-2020) with 41mm Fork
• T100 2019-PRESENT 
• Street Twin "late"
• Street Scrambler "late"

By "Late" we mean: 2019 to Present "late" model Street Twin (vin over 914974 and Street Scrambler (vin over 914974) - Bikes with the regulator located in front of the radiator not under the yoke. 

We also make these parts for other Triumph Twins as below : 

For Air Cooled Triumph Twins (2001-2015), Early (2016-2018) Street Twin and Street Scrambler, Triumph Bobbers with Single Disc, please see Part MMU512

For 47mm Fork Bobber (Bobber Black 2018-Present) and Speedmaster (2021-Present) See Part MMU516

MC Part ID: MMU514

Motone Saturn V Exhaust for 2017-2024 Triumph Bobber/Speedmaster

Compatible with Triumph Bobber and Speedmaster from 2017 to 2024.

Built Like a Rocket!

New for Version 2.0

• We have now added a step change in the diametre of the link pipes to allow for a smooter transition under the heat shield between the muffler and the link pipes
• Removable dB Killers included as standard - you leave these in or remove depending what level of volume you after 

Formed out of 300 Series Stainless Steel with CNC Machined 6061 Aluminium End Caps - Available here in Brushed Finish

contains all the parts you need to connect to your Triumph Bobber or Speedmaster Motorcycle.

Kit Contains :

2 x Mufflers with Billet End Caps

2 x Muffler to Xpipe Link Pipes

2 x Graphite Exhaust Gaskets

2 x Jubilee Clamps

Muffler and Link-Pipe System connects directly to your Cat or X-Pipe 

The silencers include removable baffles (made from perforated tubes and wadding material - to remove them you need to remove the silencers from the bike, undo the fixing bolt and push the baffle out from the inside).

Richer sound - with the catalyst in place the noise level is one notch higher than stock and with a more "throaty" sound (more like an older Twin). With the catalyst removed/bypassed the noise level goes up again but remain civilised.

MC Part ID: MTE154

Windshield with GPS support for Triumph  Bonneville T100 (2017 until now)
Complete with supports and screws, it perfectly fits the style and lines of the front. Made of 4mm thick PMMA (Acrylic)
It mounts very easily and offers excellent aerodynamic protection. The front louver eliminates turbulence, and the support tube doubles as a GPS mount.
Colours: Transparent, dark smoke, yellow

NB: Sticker cod.3136 optional. If you'd like to add a Unit Garage windshield sticker to the windshield, click here.

Code: 1012TR

Sold as a Pair

Ballista valve stem caps - formed using the same traditional forging techniques used by Michelin in the 1950s to add some class to your Motorcycle (or even car/hot rod etc wheel

These are Sold as a Pair and available here in brass finish

MC Part ID: MMU071

MC PART ID: MMU095

MC PART ID: MMU538

MC PART ID: MMU539

MC PART ID: MMU509

MC PART ID: MMU027

 Ribbed Clutch/Primary Side Engine Cover/Badge suitable for all the 900 and 1200cc Triumph Twins from 2016 to now.

MC PART ID: MMU037

MC PART ID: MMU017

Machine rolled out of 5052 Aluminium, Trimmed, Drilled and then Black Anodised - this rear mudguard is bolt-on for your Triumph Bonneville.

This version of the fender comes pre drilled ready to mount any of the Motone Fender Mount Light Kits (Eldorado, Bel Air, Lecter, Cuda, Big Fin etc), which are sold separately.

It also has a hole for wiring loom (we recommend our part code DDM012, sold separately) to pass through 

Fits 2016 and Up 

• Bonneville T100
• Bonneville T120
• Street Cup
• Street Twin
• Street Scrambler

Fender measures 570mm (22.5 inches) long measuring along the circumference from front to back.

180mm in width (7 inches)

MC PART ID: MTE151

Machine rolled out of 5052 Aluminium, Trimmed, Drilled - this front mudguard is bolt-on for your Triumph Bonneville with spoked rims/wire wheels.

Available here in a vertically brushed finished and then Anodised in Black

Good for 2001-2016 (Air Cooled) Bonneville, T100, Scrambler, Thruxton.

Not for mag wheel

MC Part ID: MTE115

Windshield XL with GPS support for Triumph 1200 XE-XC
Made of 4mm thick PMMA (Acrylic)
In this larger version we have further implemented aerodynamic protection. The front vent eliminates turbulence and the upper part is wider and more protective.

If you'd like to add a Unit Garage windshield sticker to the windshield, click here.

Code: 3105XL_TR

Give your Triumph Bonneville T120 and Bobber a classic look with bar end mirror mount/sliders.

• Works as a bar end mirror mount and slider to protect your bike from damage during a accident. 
• Fits Triumph Bonneville, Bonneville Bobber, Street Scrambler, Street Twin and Thruxton.
• Easy installation.
• 7/8" diameter mirror mounting area for all Joker Machine and many other brands of bar end mirrors.
• Available in hard black anodize or raw aluminum silver finishes.
• Sold individually (not in pairs)
• Made in the USA

Fits

• Triumph Bobber 2017-UP
• Triumph Bobber Black 2018-UP
• Triumph Bonneville T100 2016-UP
• Triumph Bonneville T120 2016-UP
• Triumph Street Scrambler 2017-2018
• Triumph Street Twin 2016-2017
• Triumph Thruxton 1200 2016-UP
• Triumph Thruxton 1200 R 2017-UP

MC Part Numbers:

• Silver: 09-300-7
• Black: 09-300-7B

Fills the empty hole left when converting to aftermarket and/or bar end mirrors - threaded internally so you can tighten them up and then forgotten about them unlike "push-in" versions which will just as easily push-out

BODY : Aviation 6061T Anodised Black
BOLT/WASHER : Stainless

FITS 2016 and UP (liquid cooled) T100 and T120 and BOBBER and SPEEDMASTER

ALTERNATIVE VERSION FOR 2001-2015 (air cooled) T100 also available

MC PART ID: OTS018

Exhaust Tips and Adapter Bracket kit for 2016 and up Triumph T100 and T120 Motorsickles: We call these the Jupiter-2.

Remove your stock mufflers and replace with these High Pressure Die Cast Tips - Finished in POLISHED FINISH
- including Stainless steel adapter brackets and hardware 

MC PART ID: MMU531

MC PART ID: DDM005

Formed out of 300 Series Stainless Steel and designed to fit on your 2016 and up Triumph Twin

We designed this Grab Rail as a low profile option initially for those that wanted to use a grab rail and a custom rear fender/tail tidy together, after several design iterations we finalised on this shape as being the lowest profile rail that works with many known seats out there as well as a lift in the rear to clear any lights. 

The Rail is also useful for parking the bike in confined space as well as for any passenger.

• Street Twin
• Street Scrambler
• Street Cup
• T100
• T120

PLEASE NOTE : Does not fit with the stock T100/T120 Seat from Triumph 

Known to fit : All Known Street Twin Seats including stock, Motone, and other aftermarket seats, Stock seat on Street Scrambler etc 

If you have a pre 2016 bike we will have a version out for your bike at some point, please don't buy this on the off chance it will fit - the bolt holes are in different positions 

MC Part ID: MCB021

Works as Running Light, Brake Light and Number plate illumination through window on underside. Designed to look good on all kinds of cafe racers, hot rods, bobbers etc.

• Diecast Aluminium with a Black Finish 
• Fully E-Marked for Homologation.
• Full SMD-LED circuit board.
• Wired as follows:
• Yellow = RUNNING light
• Red = STOP light
• Black = Earth

Sold here as kit which includes matching cast Rear Fender Mount Bracket, Rubber Gasket and Stainless Bolts.

Can be combined with Motone rear fenders (e.g. high-tail custom mudguard) and license/number plate brackets (e.g. round light bracket). Requires a wiring loom which can be purchased separately (e.g. DDM012).

MC PART ID: MEL021+MEL022

Saturn V - Muffler Kit for 2016 - 2024 T100/T120

Suitable for Bonneville T100/T120 EURO 4 and EURO 5 versions 1996-2024. Does NOT fit EURO 5+ versions produced from 2025 onwards.

T100 and T120 Triumph Bonnevilles

2 x Stainless Steel Slip-On Mufflers with CNC Machined Billet End Caps

Polished Version

The silencers include removable baffles (made from perforated tubes and wadding material - to remove them you need to remove the silencers from the bike, undo the fixing bolt and push the baffle out from the inside).

Richer sound - with the catalyst in place the noise level is one notch higher than stock and with a more "throaty" sound (more like an older Twin). With the catalyst removed/bypassed the noise level goes up again but remain civilised.

MC Part ID: MTE160

The Jetson - PRESENTED HERE IN POLISHED BRASS Finish 

This is our latest creation, the JETSON our Dished Low-profile Gas Cap for your pride and joy 

The JETSON is actually works as both a VENTED and NON-VENTED Gas Cap as it can be assembled with the Vents open or closed, which means besides working on any modern Triumph Twin its also works on custom choppers, Harley Tanks as well as the BMW R18

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for grip

FITS ALL YEARS BONNEVILLE THRUXTON, AMERICA, T100, SPEEDMASTER, SE, SCRAMBLER, BOBBER, STREET CUP, STREET SCRAMBLER, T120 : 2001 to 2025. Only Suitable for Street Twin/Speed Twin 900 and Speed Twin 1200 up to 2024.

** NOT SUITABLE FOR 2025 TRIUMPH SPEED TWIN 900/1200 NOR ANY OF THE 2026+ TRIUMPH MODELS, CURRENTLY UNDER DEVELOPMENT **

TRIUMPHS WITH STOCK FAUX-MONZAS (SPEED TWIN 1200/SCRAMBLER 1200/THRUXTON 1200) we would recommend the Billet Gas Cap NXS006 and the Adapter Ring (BLACK or POLISHED) instead rather than this one

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018,SPORTSTER, 48, IRON ETC

MC PART ID:MMU655

MC PART ID: ADT004

MC PART ID: ADT005