MOTORCYCLE PARTS

Gort!

Full SMD-LED circuit board.

Works as Running Light, Brake Light and Number plate illumination through window on underside.

Diecast Aluminium with a Gloss Black Finish 

Fully E-Marked for Homologation.

Wired as follows :

Yellow = RUNNING light

Red = STOP light

Black = Earth

MC PART ID: MEL526

Kit Includes

• Bracket Milled out of Aviation Billet Aluminium with facility for ABS Sensor and Caliper in 12 o'clock position (instead of 6 o'clock stock)
• Braided Lengthened Stainless Steel Brake Line Hose In Stainless Steel 
• Banjos/Bolts/Copper Washers

This bracket can be fit to any of the Street Twin/Speed Twin 900, Street Scrambler 900, Street Cup, T100 and T120 Bikes from 2016 and Up. 

It is compatible with the stock ABS sensor 

Please note - in order to bleed the ABS hose you need to submit the correct command to the ECU on board the bike, to do this besides doing it at a dealer you can do it at home using a suitable OBD2 device that works with either TUNEecu (Android phone or tablet) or DealerTool software 

MC Part ID: MTE060

The Peerless

Formed from High Pressure Die Cast Aluminium and finished in our signature wrinkle powder coat Black 

These are Bolt On Covers that fit over the top of your existing Speedo Dials in minutes

Suitable for

• T120 (All Years)
• T100 LC (All Years 2017-Now) 
• Street Cup (All Years)
• Thruxton 1200/R/RS (All Years)
• Speed Twin 1200 (All Years)

MC Part ID: MMU575

The Peerless

Formed from High Pressure Die Cast Aluminium and finished in our signature wrinkle powder coat Black 

These are Bolt On Covers that fit over the top of your existing Speedo Dials in minutes

Suitable for

• T120 (All Years)
• T100 LC (All Years 2017-Now) 
• Street Cup (All Years)
• Thruxton 1200/R/RS (All Years)
• Speed Twin 1200 (All Years)

MC Part ID: MMU597

PRESENTED HERE IN  POLISHED Finish 

This is our latest creation, the JETSON our Dished Low-profile Gas Cap for your pride and joy 

The JETSON is actually works as both a VENTED and NON-VENTED Gas Cap as it can be assembled with the Vents open or closed, which means besides working on any modern Triumph Twin its also works on custom choppers, Harley Tanks as well as the BMW R18

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for grip

FITS ALL YEARS BONNEVILLE THRUXTON, AMERICA, T100, SPEEDMASTER, SE, SCRAMBLER, BOBBER, STREET TWIN, STREET CUP, STREET SCRAMBLER, T120 : 2001 to TODAY

TRIUMPHS WITH STOCK FAUX-MONZAS (SPEED TWIN 1200/SCRAMBLER 1200/THRUXTON 1200) we would recommend the BIllet Gas Cap NXS006 and the Adapter Ring instead rather than this one

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018,SPORTSTER, 48, IRON ETC

MC PART ID: MMU654

Developed to alleviate the issue of not being able to fit the front mudguard when you fit an oversized front tyre

THE ELEVATOR

Its of critical importance to your safety that you factor in tyre expansion under speed when fitting this item - modern type radial tyres will only expand a few mm - vintage style cross ply tyres can well expand over 15mm under speed and load so bare this in mind before fitting 

We have designed in 4 points of height adjustable on the bracket (rather than a sliding adjustment again for safety reasons) 

If in doubt go higher than you think required 

Made out of Steel and Painted in Black - it also includes hose clips - one of which is optional for if have a dual disc front fork like the T120 

Designed to fit 2016 and Up 

• T100 LC
• T120 
• Street Twin / Speed Twin 900
• Street Scrambler / Scrambler 900

It may work on some other models which we will update here after testing

MC Part ID: MTE211

The Speed Cuff

Formed from Hot Forged Billet Brass and then Polished (you can easily take the shine off if you prefer that look)  

These are Bolt On Covers that fit over the top of your existing Speedo Dials in minutes

Suitable for

• T120 (All Years)
• T100 (All Years 2017-Now) 
• Street Cup (All Years)
• Thruxton 1200/R/RS (All Years)
• Speed Twin (All Years)

MC Part ID: MMU582

Sold as a Pair

Ballista valve stem caps - formed using the same traditional forging techniques used by Michelin in the 1950s to add some class to your Motorcycle (or even car/hot rod etc wheel

These are Sold as a Pair and available here in brass finish

MC Part ID: MMU071

MC PART ID: MMU095

MC PART ID: MMU538

MC PART ID: MMU539

MC PART ID: MMU509

Tail Tidy Plate 2.0 with Storage Tray and Motone ELDORADO Tail Light Integrated - SOLID BRASS

Our latest iteration of the kit comes with modular removable Indicator bracket which means that for those who want to mount the signals elsewhere its even easier.

Suitable for Liquid Cooled Triumph Twins from 2016 and up

Namely - Street Twin / Street Cup / Street Scrambler / T100 / T120

Plug and play wiring loom as follows 

Our Adapter comes both colour and letter coded with each function banded together and labelled for easy use.

It also utilises all 6 of the stock loom plugs giving you an extra live connector to run any auxiliary devices 

T : Tail light - 

RED - BRAKE Light

YELLOW - RUNNING Light

BLACK - Earth

L : Left Indicator/Turn Signal

BROWN - LHS Signal

BLACK - Earth

R : Right Indicator/Turn Signal

ORANGE - RHS Signal

BLACK - Earth

A : Auxiliary Live

GREEN - AUX

BLACK - Earth  

Note : 6-Way loom connector hermetically sealed to prevent water ingress

MC PART ID: CBS004+MEL520+DDM012

MC PART ID: MMU027

MC PART ID: MMU037

MC PART ID: MMU017

Give your Triumph Bonneville T120 and Bobber a classic look with bar end mirror mount/sliders.

• Works as a bar end mirror mount and slider to protect your bike from damage during a accident. 
• Fits Triumph Bonneville, Bonneville Bobber, Street Scrambler, Street Twin and Thruxton.
• Easy installation.
• 7/8" diameter mirror mounting area for all Joker Machine and many other brands of bar end mirrors.
• Available in hard black anodize or raw aluminum silver finishes.
• Sold individually (not in pairs)
• Made in the USA

Fits

• Triumph Bobber 2017-UP
• Triumph Bobber Black 2018-UP
• Triumph Bonneville T100 2016-UP
• Triumph Bonneville T120 2016-UP
• Triumph Street Scrambler 2017-2018
• Triumph Street Twin 2016-2017
• Triumph Thruxton 1200 2016-UP
• Triumph Thruxton 1200 R 2017-UP

MC Part Numbers:

• Silver: 09-300-7
• Black: 09-300-7B

Fills the empty hole left when converting to aftermarket and/or bar end mirrors - threaded internally so you can tighten them up and then forgotten about them unlike "push-in" versions which will just as easily push-out

BODY : Aviation 6061T Anodised Black
BOLT/WASHER : Stainless

FITS 2016 and UP (liquid cooled) T100 and T120 and BOBBER and SPEEDMASTER

ALTERNATIVE VERSION FOR 2001-2015 (air cooled) T100 also available

Exhaust Tips and Adapter Bracket kit for 2016 and up Triumph T100 and T120 Motorsickles: We call these the Jupiter-2.

Remove your stock mufflers and replace with these High Pressure Die Cast Tips - Finished in POLISHED FINISH
- including Stainless steel adapter brackets and hardware 

MC PART ID: MMU531

MC PART ID: DDM005

Formed out of 300 Series Stainless Steel and designed to fit on your 2016 and up Triumph Twin

We designed this Grab Rail as a low profile option initially for those that wanted to use a grab rail and a custom rear fender/tail tidy together, after several design iterations we finalised on this shape as being the lowest profile rail that works with many known seats out there as well as a lift in the rear to clear any lights. 

The Rail is also useful for parking the bike in confined space as well as for any passenger.

• Street Twin
• Street Scrambler
• Street Cup
• T100
• T120

PLEASE NOTE : Does not fit with the stock T100/T120 Seat from Triumph 

Known to fit : All Known Street Twin Seats including stock, Motone, and other aftermarket seats, Stock seat on Street Scrambler etc 

If you have a pre 2016 bike we will have a version out for your bike at some point, please dont buy this on the off chance it will fit - the bolt holes are in different positions 

MC Part ID: MCB021

Works as Running Light, Brake Light and Number plate illumination through window on underside. Designed to look good on all kinds of cafe racers, hot rods, bobbers etc.

• Diecast Aluminium with a Black Finish 
• Fully E-Marked for Homologation.
• Full SMD-LED circuit board.
• Wired as follows:
• Yellow = RUNNING light
• Red = STOP light
• Black = Earth

Sold here as kit which includes matching cast Rear Fender Mount Bracket, Rubber Gasket and Stainless Bolts.

Can be combined with Motone rear fenders (e.g. high-tail custom mudguard) and license/number plate brackets (e.g. round light bracket). Requires a wiring loom which can be purchased separately (e.g. DDM012).

MC PART ID: MEL021+MEL022

SUITABLE FOR ALL EURO 4, EURO 5, and EURO 5+ Bikes 2016-Onwards

Saturn V - Muffler Kit for 2016 and UP

T100 and T120 Triumph Bonnevilles

2 x Stainless Steel Slip-On Mufflers with CNC Machined Billet End Caps

Polished Version

The silencers include removable baffles (made from perforated tubes and wadding material - to remove them you need to remove the silencers from the bike, undo the fixing bolt and push the baffle out from the inside).

Richer sound - with the catalyst in place the noise level is one notch higher than stock and with a more "throaty" sound (more like an older Twin). With the catalyst removed/bypassed the noise level goes up again but remain civilised.

MC Part ID: MTE160

MC PART ID: MTE217

MC PART ID: MSM038

The Jetson - PRESENTED HERE IN POLISHED BRASS Finish 

This is our latest creation, the JETSON our Dished Low-profile Gas Cap for your pride and joy 

The JETSON is actually works as both a VENTED and NON-VENTED Gas Cap as it can be assembled with the Vents open or closed, which means besides working on any modern Triumph Twin its also works on custom choppers, Harley Tanks as well as the BMW R18

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for grip

FITS ALL YEARS BONNEVILLE THRUXTON, AMERICA, T100, SPEEDMASTER, SE, SCRAMBLER, BOBBER, STREET TWIN, STREET CUP, STREET SCRAMBLER, T120 : 2001 to TODAY

TRIUMPHS WITH STOCK FAUX-MONZAS (SPEED TWIN 1200/SCRAMBLER 1200/THRUXTON 1200) we would recommend the BIllet Gas Cap NXS006 and the Adapter Ring instead rather than this one

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018,SPORTSTER, 48, IRON ETC

MC PART ID:MMU655

MC PART ID: ADT004

MC PART ID: ADT005

Windshield with GPS support for Triumph Bonneville T120

Complete with supports and screws, it perfectly fits the style and lines of the front. Made of 4mm thick PMMA (Acrylic).

It mounts very easily and offers excellent aerodynamic protection. The front louver eliminates turbulence, and the support tube doubles as a GPS mount.

Code: 3149DS

MC Part ID: GSS006

The Duckbill

Precision Injection Molded ABS and finished in high quality automotive Gloss Black.

Good for all 2016 and up (Liquid Cooled) Bonneville, T100, T120, Street Scrambler, Street Cup, Street Twin

Will not fit Bobber or Thruxton R

Alternative version for pre 2016 Twins also available.

MC PART ID: MTE118

Set of Custom Rubber Grips for your Triumph Bike include the full throttle assembly so they are plug and play 

Throttle Inner Machined out of Billet 6061 T6 Aluminium

Outer Rubber Grips with custom molded Union Jack pattern 

SOLD AS A PAIR 

This version is suitable for the 22mm Bar Triumphs so that means all of these from 2016 to today : 

Street Twin / Speed Twin 900 / Speed Twin 1200 / Street Triple / Speed Triple / Thruxton 1200 / Street Scrambler / Scramber 900

MC Part ID: GRP001