HEATED GEAR

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Heated, female-specific, hard knuckle winter gloves with Thermotronic Heating Technology.

The THERMOTRONIC heating technology system equipped Liberty H2O Ladies motorcycle gloves are female-specific in fit and design, and ready to tackle the worst winter can throw at you – whether it’s wind, water, or cold. The Liberty H2O Ladies motorcycle gloves will keep your digits comfortably warm at 33 degrees Celsius. Leaving the actual heating level up to you, the system features 4 different heating levels (from higher heat to lower heat) that can easily be suited to your own preference. The large button has a colored ring that makes it perfectly easy to spot the heat level you’re on, and switching is a breeze, too. The comfortably thick – yet not so thick you’re robbed of feel – Exkin® Platinum with PrimaLoft Gold ® insulation is there to keep your hands warm and comfortable in the cold. Just keeping your hands warm isn’t enough. That’s why we’ve equipped the outer shell of the motorcycle gloves with flexible soft shell material, as well as leather, and to finish things off the hydratex|Z-liner is up to the task to keep your hands dry, too. Similarly important, the carefully placed reflective logos and striping will aid rider visibility. Rest assured your hands are kept comfortable when temperatures drop, knowing the Liberty H2O Ladies motorcycle gloves are up to the task.

 COMFORT FEATURES

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Hard knuckle winter gloves with Thermotronic REV’IT! Heating Technology.

The heated Liberty H2O motorcycle gloves have been specifically designed to be highly protective, waterproof, and feature our high-tech THERMOTRONIC technology system that is meant to keep your hands at the ideal temperature of around 33 degrees Celsius, regardless of weather influences such as wind, moist and cold. The THERMOTRONIC features 4 different heating levels (from higher heat to lower heat) that can easily be adjusted with the large button on the upper part of the glove. Thanks to the colored ring around the button, it’s very easy to see what level of warmth your motorcycle gloves are providing. The outside of the motorcycle gloves is constructed with a flexible softshell on the upper side, and leather on the inside of the hand. An additional grip patch on the palm further provides more control of the handlebars of your motorcycle. We combined Exkin® Platinum with PrimaLoft Gold ® insulation to keep your hands warm and comfortable in the cold. By using a hard-shell knuckle protector combined with a TPU palm slider, the motorcycle gloves offer a heavy dose of protection in case of a mishap. And since it has an incorporated hydratex|Z-liner construction, 100% waterproofing is guaranteed. Additionally, reflective stripes and logos are added to the top of the hands for increased visibility. And let’s not forget the inclusion of the Connect Finger Tip fabric that allows you to operate touchscreens without removing your hand protection, especially when it’s cold out. Keep your hands comfortable even when temperatures take a dive with the Liberty H2O motorcycle gloves.

The G601 Heated Motorcycle Gloves are Keis' best-selling motorcycle touring glove.

These heated motorcycle gloves feature 3M Thinsulate™ insulation, are designed specifically for motorcycling in cold weather, and are fully certified LEVEL 2 to the new EU PPE Regulation 13594:2015.

These motorcycle gloves would suit the rider who enjoys riding throughout the cold WINTER months

The Keis G601 Heated Motorcycle Gloves have been specially designed to offer exceptional feel of the controls and dexterity, but with the added benefit of a micro carbon fibre heating panel across the back of the hands and over the top of the fingers. These gloves feature a thicker layer of 3M Thinsulate to offer improved warmth distribution throughout the glove, especially across the back of the hand and the fingers, together with hardened knuckle protection.

Features:

• Independent, integral heat controller, positioned on the back of the wrist for easy operation when riding - whether you prefer to wear your gloves under or over your jacket sleeve cuffs.
• Flexible hard armour across the knuckles, deliver the perfect balance between strong protection and all-day touring comfort
• NEW Scaphoid guard, for maximum protection to the palm
• Visor Wipe positioned on the left index finger.
• 3M Thinsulate™ and Hipora™ waterproof membrane for premium water and wind protection
• Conforms to the latest European PPE Directive EN 13594:2015, so you can be confident in their protective qualities. Please note: All personal protective equipment in Europe must clearly show whether they comply with the current PPE regulation via a label. A label showing 'CE approval' does not mean they are certified.  
• The G601 gloves also feature a glove battery pocket built into the glove cuff. This provides the feature of being able to power the gloves via the optional portable glove batteries (one in each glove cuff battery pocket). See Keis Lithium Batteries for details.
• Current Draw 1.6A. Typical Power 19.2W.
• Available in sizes  5 (XXXS), 6 (XXS), 7 (XS), 8 (S), 9 (M), 10 (L), 11 (XL), 12 (XXL), 13 (XXXL).

Options for powering the G601 Heated Motorcycle Gloves:

1) Power these heated motorcycle gloves from the motorcycle or via a glove battery

• Using the latest technology in heat generation, the G601 gloves can be powered from a 12V vehicle battery (cables supplied), one of the optional Battery Packs, or the specially designed Glove Batteries that fit into the cuff pocket of each glove.

a) Powering your heated gloves from a motorcycle power lead: 

• Click here to view video.

b) Powering your heated gloves from an optional single Portable Battery Pack

• Click here to view video.

c) Powering your heated gloves from the optional Keis Glove Battery Set

• Click here to view video.

2) Powering your heated gloves from a Keis heated vest, or heated Bodywarmer

• This can be achieved using the Y-lead that comes with the gloves. Alternatively, you can also purchase the 'Glove to Vest/Bodywarmer Power Lead set' which is sold separately here.
• Click here to view video.

3) Powering your Keis Heated Motorcycle Gloves from a Keis Heated Jacket.

• Note: You may need a connection adaptor if you are wishing to connect a pre-2020 garment to a post-2020 garment.
• Click here to view video.

How to Determine which size you'll need:

Example: if the widest part of your dominant hand, when measured around the hand and excluding the thumb, equals 9 inches, you would be glove size 9 - M. 

Note: Keis recommend that you purchase one size larger than your measured glove size, for best comfort, especially if you're in between sizes. E.g. if your measurement is just over 9", rather than choosing glove size 9 - M, choose glove size 10 - L for best comfort.

- Glove size 5 - XXXS
- Glove size 6 - XXS
- Glove size 7 - XS
- Glove size 8 - S
- Glove size 9 - M
- Glove size 10 - L
- Glove size 11 - XL
- Glove size 12 - XXL
- Glove size 13 - XXXL

Included with these motorcycle gloves are: 

• G601 Premium Heated Armoured Gloves
• Glove Y Lead
• Motorcycle Connection Lead
• Instructions
• The G601 heated motorcycle gloves feature the 'Male Power Plug' to connect to your chosen power source. What does the 'Male Power Plug' look like on these gloves? See image below.

See here for the 2021 Keis Apparel Heated Clothing Instructions Manual

To watch a video on how to connect a Keis heated garment to your motorcycle click here.

Cleaning guidelines:

• Our recommended method for cleaning both our leather and fabric outer gloves is to wipe the outside of the gloves with a cloth moistened with a solution prepared from S100 Technical Fabric and Leather Wash.
• Repeat, rinsing and wringing out the cloth regularly in clean solution until the gloves appear clean.
• Wipe over with a cloth moistened in plain water and allow to dry thoroughly at room temperature.
• Finally apply S100 reproofing Spray for Fabric and Leather.  We do not recommend immersion in water or washing in a washing machine.

The Keis unisex heated jacket is hugely versatile: wear it as a heated under layer beneath a motorcycle jacket, or an outer layer when you’re off the bike but need to stay warm. Special high tech heat panels are strategically positioned on the chest, back, arms and collar to battle the cold. 

Battle the elements when you’re on your motorbike in style with the Keis J501RP Premium Heated Jacket. It combines the very latest heat generation technology with a lightweight, stylish design, and is designed to be powered directly from your motorcycle’s battery.

The best features of the J501RP Keis premium heated jacket are:

• Lighter, thinner construction for a more streamlined fit under your motorcycle jacket.
• The very latest Micro Carbon Fibre heat pads for advanced heat radiation, providing an even layer of heat across the targeted chest, back, arms and collar areas.
• More leisure pockets and a dedicated heat controller pocket, for increased convenience and ease of use.

Fitment:

Available heated jacket sizes: 46 (90CM/36IN in chest size) to 60 (125CM/50IN in chest size). 

Measure around the fullest part of your chest, keeping the measuring tape horizontal.

Due to the elasticated side panels you may find you need to order the chest size smaller for a snug fit. A snug fit provides the most efficient transfer of heat from the heated jacket, through your required under layer (e.g. long sleeved t-shirt), to your upper body.

What you get with the J501RP Keis heated jacket: 

• Keis Premium Heated Jacket J501RP
• Keis Vehicle Supply Lead: Each item of Keis heated clothing is supplied with one of these Power Supply Leads. The end of the lead with the red and black battery eyelets is connected directly to the motorcycle battery - make sure to do this carefully. We advise watching the video on how to install the Keis vehicle supply lead to your motorcycle here.
• Instructions: See here for the 2020 Keis Apparel Heated Clothing Instructions Manual 

Features:

• The very latest heat generation technology, using Micro Carbon Fibre for extreme comfort and reliability.
• The latest design in breathable lightweight soft shell fabric, with stylish elasticated side panels provide a perfect fit for men and women.
• Designed to be worn as an inside layer or stylish outer jacket.
• Dedicated zipped pockets for cables and Power Controller to keep things tidy and easy to find.
• Convenient lifestyle pockets for increased practicality.
• Strategically positioned heat panels on chest, down the back, arms and collar provide extreme warmth.
• Complete with all required wiring and full easy to follow instructions.
• Available in all Black, with red piping, and complete with motorcycle/vehicle wiring harness.
• Current Draw 5.5A. Typical Power 66W.

Please Note:

1. While this heated jacket can be powered by a Keis Portable Battery Pack, this may not be very practical. Why? As the heated jacket draws 5.5Amps of current to heat the many different Micro Carbon Fibre heating elements, the portable battery will only last a very short time and therefore is not the most ideal power source. For example, a 2600 mAh battery running the Keis High Powered J501 Premium Heated Jacket at full power would last around 20 minutes. As such, it is advised that this heated jacket be powered from a vehicle battery connection.
2. Can also be powered via the Keis Cigarette Lighter/DIN Power Supply Lead (available as an optional accessory).

SPECIAL NOTE - You are unable to power this heated garment using a cigarette lighter/DIN power lead on a BMW motorcycle, due to the 5Amp limit to their DIN power socket (the jacket draws 5.5Amps).

See here for the 2020 Keis Apparel Heated Clothing Instructions Manual 

Want to know more? Read the Keis Frequently Asked Questions (FAQs) here.

Stay warm whilst motorcycling, hiking or riding, with the Keis Heated Vest - Premium V501RP

The Keis range of heated vests, for men and women, have heat panels on the chest, back and collar to provide some serious warmth. The latest in breathable, lightweight, soft fabrics come as standard, with elasticated side panels for a perfect fit. We especially love the dedicated zipped pockets that house the cables and controller to keep things tidy and easy to find.

For decades Keis have been at the forefront of the heated clothing market, helping to drive new ideas and technologies. Gone are the chunky cables and primitive heating elements of old – today, Keis is leading the way, reaching new levels of heat and comfort. Their Premium V501RP Heated Vest combines the very latest heat generation technology with a super lightweight, stylish design.  

What will you get in your Keis heated vest, model V501RP?

• Lighter, thinner construction for a more streamlined fit under your motorcycle jacket.
• The very latest Micro Carbon Fibre heat pads for advanced heat radiation, providing an even layer of heat across the targeted chest and back areas.
• More leisure pockets and a dedicated Heat Controller pocket, for increased convenience and ease of use.

Fitment:

The Keis Heated Premium Vest is available in sizes 46 (90CM/36IN in chest size) to 60 (125CM/50IN in chest size). Measure around the fullest part of your chest, keeping the measuring tape horizontal.

Please Note: Due to the elasticated side panels you may find you need to order the chest size smaller for a snug fit. A snug fit provides the most efficient transfer of heat from the Keis Heated Vest, through your t-shirt, to your upper body.

What’s Included with your V501RP heated vest: 

• Keis V501RP Premium Heated Vest
• Keis Vehicle Supply Loom: Each item of Keis heated clothing is supplied with one of these Power Supply Leads. The end of the lead with the red and black battery eyelets is connected directly to the motorcycle battery - make sure to do this carefully. We advise watching the video on how to install the Keis vehicle supply lead to your motorcycle here.
• Instructions: See here for the 2020 Keis Apparel Heated Clothing Instructions Manual

Convenient power options for your heated vest

This is a Dual-Power garment, and as such can be powered via the supplied vehicle wiring harness or via a Keis portable battery pack. Keis battery packs are optional extras that can be purchased separately here. This garment can be used with an optional Heat Controller to select three different heat settings.

Features:

• The very latest heat generation technology, using Micro Carbon Fibre for extreme comfort and reliability.
• The latest design in breathable lightweight softshell fabric, with stylish elasticated side panels that provide a perfect fit for men and women.
• Dedicated zipped pockets for cables and optional Heat Controller to keep things tidy and easy to find.
• Convenient lifestyle pockets for increased practicality.
• Strategically positioned heat panels on chest and down the back for maximum effect.
• Flexible 12v Dual-Power for use anywhere anytime. (Batteries sold as an optional extra)
• Complete with all required wiring and full easy to follow instructions
• Available in all Black, with stylish red piping running down the front, and complete with motorcycle/vehicle wiring harness.
• Current Draw 1.5A.  Typical Power 18W.

See here for the 2020 Keis Apparel Heated Clothing Instructions Manual

Want to know more? Read the Keis Frequently Asked Questions (FAQs) here.

Keis heated clothing Bluetooth power controller

NEW FOR 2021/2022. JUST ARRIVED!

POWER CONTROLLER USING THE KEIS iCONTROL APP. This Keis BLUETOOTH Power Controller is suitable for all Keis Heated Jackets, Bodywarmers, and Vests, and other Keis heated garments that do not feature a built-in power controller.

Water-resistant (Ingress Protection Rating: IP65) power controller (sometimes referred to as 'heat controller') with current overload protection.

Besides being able to connect to the downloadable Keis iControl mobile App, our Bluetooth Power Controller is also 'constant' power controller, which intelligently smooths out any small input voltage and current fluctuation, and enables you to reliably control the power setting of any Keis heated garment up to a current draw of 10A.

Key features of the Keis heated clothing Bluetooth Power Controller:

• Download the free Keis iControl application on the Google Play store or Apple App Store.
• Constant power controller.
  
• Three heat settings with LED indicator: 33% (green), 66% (amber), and 100% (red).
• Water resistant (Ingress Protection Rating: IP65)
• 10A Current overload protection.

Download the Keis Heat (Power) Controller User Instructions.

Download the application onto your mobile phone:

Android:
https://play.google.com/store/apps/details?id=com.propagation.keis

iOS:
https://apps.apple.com/dk/app/keis-icontrol/id1545312710

Please Note: The Keis Heat Power Controller cannot be used in series with any other integral (as in the Keis heated motorcycle gloves) or external Controller.

Part Number: W54-370889

Keis heated clothing power controller

Water-resistant (Ingress Protection Rating: IP65) power controller (sometimes referred to as 'heat controller') with current overload protection.

For the ultimate flexibility, Keis new Power Controller is a 'constant' power controller, which intelligently smooths out any small input voltage and current fluctuation, and enables you to reliably control the power setting of any Keis heated garment up to a current draw of 10A.

Key features of the Keis heated clothing Power Controller:

• Constant power controller.
• Three heat settings with LED indicator: 33% (green), 66% (amber), and 100% (red).
• Water resistant (Ingress Protection Rating: IP65)
• 10A Current overload protection.

Download the Keis Heat (Power) Controller User Instructions. 

Please Note: The Keis Heat Power Controller cannot be used in series with any other integral (as in the Keis heated motorcycle gloves) or external Controller.

Part number: W54-371220

• Provides quick and simple connection to a vehicle battery (such as a motorcycle)
• Integral fuse protection
• Complete with Fuse Pack for multiple garments.
• 120cm long
• 6mm battery eyelet connection.

Part Number: W54-370070

Please Note: Avoid routing the power supply lead in such a ways as to make direct contact with hot surfaces, like your motorcycle engine and exhaust.

Use this power lead to power your Keis heated clothing from your motorcycle cigarette or DIN socket 

• Provides quick and simple connection to a vehicle via the cigarette lighter socket, or twist and remove the ‘red’ end section to adapt for a DIN socket connection.
• Integral fuse protection.
• 10A maximum loading (NOTE: not suitable for all applications. E.g. BMW DIN sockets)
• 60 cm Long
• Complete with Fuse Pack.

Part Number: W54-370032

NEW - JUST ARRIVED

New heated thin mid-layer garment designed from the ground up, using specially designed textiles and an enhanced heating system.

This new Heated Bodywarmer has been designed to deliver maximum comfort and superior heating efficiency - featuring UltraFlex technology. This B601RP bodywarmer features a much thinner material structure than the alternative soft-shell V501RP heated vest and B501WRP ladies heated bodywarmer - being designed to fit between the wearer's base-layer and their outer motorcycle jacket when there is not a lot of space to accommodate a mid-layer heated garment. The unique UltraFlex material also provides generous elastic 4-way stretch, moulding the garment to the wearer’s body contours for a snug fit, without restricting movement.

Keis developed UltraFlex specifically for motorcycle mid-layers, so that riders can enjoy riding safely in colder environments. The fabric is lightweight, breathable, and wicks away moisture, keeping riders comfortable and dry, while the Keis heating panels deliver warmth to strategically positioned areas of the body.

The unisex Keis UltraFlex Heated Bodywarmer delivers 41W (3.4A) of power to heat panels in the chest, back, and collar.

What makes the B601RP Keis UltraFlex Heated Jacket unique:

• This heated bodywarmer incorporates the next-generation heating and textile technology for heated garments - featuring UltraFlex technology.
• The very latest Micro Carbon Fibre heat pads for advanced heat radiation, providing an even layer of heat across the chest, back, and collar areas.
• The B601RP UltraFlex heated bodywarmer features power output sockets in both arm pits, and built into the inside waist band. This allows the user to connect and power a pair of Keis heated gloves (using the vest-to-glove power leads), and/or a Keis heated trouser, socks, or boot insoles. Add these additional heated garments to your jacket, to build your luxurious fully integrated heated solution.

What you get with the B601RP UltraFlex Keis heated jacket:

• Keis UltraFlex Heated Bodywarmer B601RP
• Keis Vehicle Supply Lead
• Instructions

Fitment notes: Due to the elasticated side panels you may find you may experience a snug fit. A snug fit provides the most efficient transfer of heat from the heated jacket, through your required under layer (e.g. long sleeved t-shirt), to your upper body.

FEATURES

• The very latest heat generation technology, using Micro Carbon Fibre for extreme comfort and reliability.
• The unique UltraFlex material provides generous elastic 4-way stretch, moulding the garment to the wearer’s body contours for a snug fit, without restricting movement.
• The fabric is lightweight, breathable, and wicks away moisture, keeping riders comfortable and dry.
• Designed to be worn as an inside mid-layer.
• Dedicated zipped pockets for cables to keep things tidy and easy to find.
• The bodywarmer features power output sockets in the arm pits. This provides the user the ability to make use of the optional vest-to-glove power leads, to power a pair of Keis heated gloves directly from the bodywarmer.
• Convenient lifestyle pockets for increased practicality.
• Strategically positioned heat panels on chest, down the back and collar provide extreme warmth.
• Complete with all required wiring and full easy to follow instructions.
• Available in all Black, with red piping, and complete with motorcycle/vehicle wiring harness. Please note: It is recommended that this high-powered bodywarmer is powered via the supplied vehicle power lead, and not from a Keis Portable Battery. The reason for this is that due to the current draw, the portable battery will only be capable of powering the bodywarmer for a short period of time.
• Current Draw 3.4A. Typical Power 41W. Please note: This may vary, depending on the size of the garment.

*Please note: This may vary, depending on the size of the garment.

The Keis B601RP Premium Heated Vest features a Lifetime Warranty on all heating panels.

2600mAh portable battery for Keis heated clothing, with a multinational charger (for UK/EU/US wall plug sockets)

You can either power your Keis Heated Vest or Keis Heated Bodywarmer via the supplied vehicle power loom (such as powering your garment from a motorcycle), or use any of the provided Keis Portable Batteries.

These have been specially designed to produce an even stream of 12V of power throughout the battery's life, while adhering to the highest level of safety.

When not powering your garment from the supplied vehicle battery lead, the Keis 2600mAh Battery is a recommended portable battery for powering one heated garment.

When you have a need to power two of our Dual Power heated garments, we advise using the larger Keis 5200mAh Battery with increased capacity. If you wish to power more than two Dual Power garments at the same time, power should be drawn from your vehicle/motorcycle battery, via the power supply lead provided. Heated jackets should not be powered from any portable battery.

Available with a wall plug charger, for UK, EU, and US electrical wall sockets.

HOW LONG DO THE PORTABLE LI-ION BATTERY PACKS LAST? Go to our FAQs page where you'll find the answer

Part number: W54-371992

Keis heated clothing - Gloves battery set (pair), can be used as an optional means to power the Keis motorcycle heated gloves, models: G301, G601, and G701.

This Includes two male-female adaptors, two batteries and a multinational charger in the box.

Some models of Keis heated motorcycle gloves feature a battery pocket within the glove cuffs. The G301, G601, and G701 gloves can be powered via a pair of Keis Glove Batteries, each with a 2000mAh capacity (total battery set charge capacity is an impressive 4000mAh).

PELASE NOTE: Use this battery for any gloves purchased after 2020 which feature a Male style connector on the end. These do NOT work with the G801. For the G801 and pre-2020 models use the 'pre-2020' version of this battery.

Part number: W54-371596

The Keis Ladies Heated Bodywarmer uses the technology of the Keis heated vest, with an added heated collar

The Heated Ladies Bodywarmer - Premium B501WRP includes all the heat generation technology of the V501 Premium Heated Vest, but has been uniquely styled with a woman’s shape in mind – plus it has a toasty-warm heated collar.

What’s Included with your B501WRP ladies heated bodywarmer: 

• Keis B501WRP Premium Heated Ladies Bodywarmer
• Keis Vehicle Supply Loom
• Instructions: See here for the Keis Apparel Heated Clothing Instructions Manual

AVAILABLE IN LADIES SIZE 6 TO 20

• Ladies 6 - XXS
• Ladies 8 - XS
• Ladies 10 - S
• Ladies 12 - M
• Ladies 14 - L
• Ladies 16 - XL
• Ladies 18 - XXL
• Ladies 20 - XXXL
• Size guide can be found here

FEATURES

• A specially designed/tailored ladies bodywarmer, with elasticated side panels to provide a comfortable fit and stylish appearance.
• A heated collar, plus heated front and back panels, this garment makes use of the latest Micro Carbon-fibre heat generation technology for efficient warmth and great battery longevity.
• Built-in power connections (under each arm area, and into the inside waist) allow for the quick and easy optional integration of Keis heated gloves, trousers and insoles.
• Motorcycle fused power cable - connecting to your bike's battery and providing a convenient power plug which you can plug the heated bodywarmer into once on the bike.

*Please note: This may vary, depending on the size of the garment.

The Keis B501WRP Premium Heated Ladies Bodywarmer features a Lifetime Warranty on all heating panels.

What is Dual Power?

The garment features Dual-Power compatibles, i.e. this garment can be powered via a supplied motorcycle power lead, or from an optional Keis portable battery pack. Allowing for use on or off the motorcycle.

Please Note:  Keis portable battery packs are optional extras. Can be used with an optional Power Controller to select three different heat settings. 

Convenient power options for your heated vest

This is a Dual-Power garment, and as such can be powered via the supplied vehicle wiring harness or via a Keis portable battery pack. Keis portable battery packs are optional extras. This garment can be used with an optional Heat Controller to select three different heat settings.

Connecting the supplied motorcycle power lead is quick and easy.

The B501WRP Premium Heated Ladies Bodywarmer can also be powered from an optional Keis portable battery pack. The 2600mAh battery, or larger 5200mAh battery, allows for the bodywarmer to generated luxurious warmth while off the bike.

WARRANTY