MOTORCYCLE PARTS

MC PART ID: ADT004

MC PART ID: ADT005

Windshield with GPS support for Triumph Bonneville T120

Complete with supports and screws, it perfectly fits the style and lines of the front. Made of 4mm thick PMMA (Acrylic).

It mounts very easily and offers excellent aerodynamic protection. The front louver eliminates turbulence, and the support tube doubles as a GPS mount.

Code: 3149DS

MC Part ID: GSS006

Set of Custom Rubber Grips for your Triumph Bike include the full throttle assembly so they are plug and play 

Throttle Inner Machined out of Billet 6061 T6 Aluminium

Outer Rubber Grips with custom molded Union Jack pattern 

SOLD AS A PAIR 

This version is suitable for the 22mm Bar Triumphs so that means all of these from 2016 to today : 

Street Twin / Speed Twin 900 / Speed Twin 1200 / Street Triple / Speed Triple / Thruxton 1200 / Street Scrambler / Scramber 900

MC Part ID: GRP001

Set of Custom Rubber Grips for your Triumph Bike include the full throttle assembly so they are plug and play 

Throttle Inner Machined out of Billet 6061 T6 Aluminium

Outer Rubber Grips with custom molded Union Jack pattern 

SOLD AS A PAIR 

This version is suitable for the Inch Bar Triumphs so that means and of these from 2016 to today : 

T100 / T120 / BOBBER / SPEEDMASTER 1200 

MC Part ID: GRP002

Passenger grip BMW R12 G/S
To refine the end of the seat, we designed a very minimal passenger handle. It provides an excellent handhold for the passenger, aids in securing luggage at the rear of the seat when travelling alone, and is effective for moving or supporting the bike in emergency off-road situations.
Made of highly resistant powder-coated stainless steel, it is very easy to assemble with the kit supplied.
If you don't want to lose your girlfriend... you need this accessory!

NB: the two small original brackets for attaching additional bands mounted under the rear mudguard must be removed, the handle is used for the same purpose.

It is compatible with all our bag frames.

Model Compatibility: R12 G/S

 Code: 5004

Engine protection plate in anodized aluminum, protects the engine and the exhaust manifolds in off-road use.

Made of 3 mm Peraluman light alloy, it is cold formed and embossed with drain holes. Pronounced ribs for extra strength are combined with simplified mounting brackets for a strong and easy setup. It is larger than the original model and is shaped to protect the exhaust manifolds in the front and in the most exposed area of the catalytic converter. It is supplied with screws, anti-vibration rubbers and spacers and is ready for assembly.

Model compatibility: BMW R12 NineT / R12 / R12 G/S

 Code: 1407BL+A21

Pair of Rally footrests for BMW R12 G/S models

If you want to go on an adventurous trip or simply want to have a more secure footrest these footrests are just what you need.
Pair of CNC solid machined footpegs with stainless steel inserts. They greatly improve the boot support when off-road riding, especially when standing, and these footrests can also be adjusted as they can rotate 30 degrees, giving every rider excellent ergonomics.

Compatibility: BMW R12 G/S

Code: 4036

MC PART ID: MTE088+MTE070

Formed out of 300 Series Stainless Steel and designed to fit on your 2016 and up Triumph Twin

This is the Skirmish! Our handly little Mini Rack/Passenger Grab Rail/In Garage Parking assistant - We made this so if you want to pop out for a quick trip to the shop to grab a 6 pack/coincidentally taking cover from your family well now you have a slightly better excuse - unlike all the other racks we have seen out there we also included a couple of handy latch tie downs position points  

The Rail is also useful for parking the bike in confined space as well as for any passenger.

• Street Twin / Speed Twin 900 
• Street Scrambler / Scrambler 900
• Street Cup
• T100
• T120

***NEWLY UPDATED - THIS IS V2.0 OF THE SKIRMISH RACK WHICH FITS MOST KNOWN SEATS***

✅DOES FIT ALL OE STREET TWIN, SPEED TWIN 900, STREET SCRAMBLER, SCRAMBLER 900 SEATS

✅DOES FIT ALL MOTONE AND ALL KNOWN AFTERMARKET SEATS

✅DOES FIT OEM T100/T120 TRIUMPH QUILTED & RIBBED BENCH SEAT

✅ DOES  FIT OEM T100/T120 OE "COMFORT" SEAT

If you have a pre 2016 bike we will have a version out for your bike at some point, please don't buy this on the off chance it will fit - the bolt holes are in different positions.  

Unfortunately the Speed Twin 1200 has a different subframe so won't fit.

MC PART ID: MCB025

Supplied here with cap in BLACK

Kit Suitable for

• Triumph Twins 2001-2015 (T100, Thruxton, SE, Scrambler)
• Triumph Twins 2016-Present (Bobber, T100, T120, Street Cup, Street Twin etc)
• Harley Davidson 1983 and Up (Sportster, Dyna, etc)
• Moto Guzzi V7
• Royal Enfield Classic (with screw top type filler bung)

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THESE BIKES (IN BLACK OR POLISH)

Monza cap built by Motone using modern HIGH PRESSURE DIE CAST technology 

Triumph/HD Fuel tank adapter kit CNC formed out of billet aviation grade aluminium 

INSTRUCTIONS HERE

MC PART ID: NMX003+NMX014

Drawn out of sheet 5052 Aluminium and then GLOSS BLACK finished.

New product so far known to fit - T100,  T120 all years , Thruxton 900, Thruxton 1200, Scrambler 1200

Different version coming for Speed Twin and Street Twin

MC PART ID: MTE187

Supplied here with cap in our signature Krackle Black

Kit Suitable for

• Triumph Twins 2001-2015 (T100, Thruxton, SE, Scrambler)
• Triumph Twins 2016-Present (Bobber, T100, T120, Street Cup, Street Twin etc)
• Harley Davidson 1983 and Up (Sportster, Dyna, etc)
• Moto Guzzi V7
• Royal Enfield Classic (with screw top type filler bung)

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THESE BIKES (IN BLACK OR POLISH)

Monza cap built by Motone using modern HIGH PRESSURE DIE CAST technology 

Triumph/HD Fuel tank adapter kit CNC formed out of billet aviation grade aluminium 

INSTRUCTIONS HERE

MC PART ID: NMX018+NMX003

MC PART ID: MMU504

Bracket Only

Replaces the Stock Rear Light Cluster on the Stock Rear Fender of the Triumph Bobber - for use with round Motone Lights (Eldorado/Bel Air/Lecter/Cuda) with or without a Number Plate Bracket (PTS012).

MC PART ID: MEL025

Full SMD-LED circuit board.

Works as Running Light, Brake Light and Number plate illumination through window on underside.

Diecast Aluminium with a Black Finish 

Designed to look good on all kinds of cafe racers, hot rods, bobbers etc.

Fully E-Marked for Homologation.

Wired as follows :

Yellow = RUNNING light

Red = STOP light

Black = Earth

MC PART ID: MEL004

Leather cover to replace the original one (rubber interior not included)

Code: 2713

This is our latest creation, the TELSTAR Low-profile Gas Cap

The TELSTAR actually works as both a VENTED and NON-VENTED Gas Cap as it can be assembled with the Vents open or closed, which means besides working on any modern Triumph Twin its also works on custom choppers, Harley Tanks as well as the BMW R18

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for grip

FITS ALL YEARS BONNEVILLE THRUXTON, AMERICA, T100, SPEEDMASTER, SE, SCRAMBLER, BOBBER, STREET TWIN, STREET CUP, STREET SCRAMBLER, T120 : 2001 to TODAY

TRIUMPHS WITH STOCK FAUX-MONZAS (SPEED TWIN 1200/SCRAMBLER 1200/THRUXTON 1200) we would recommend the Billet Gas Cap NXS006 and the Adapter Ring instead rather than this one

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018,SPORTSTER, 48, IRON ETC

MC PART ID: MMU656

The Craig Bars - Named after Craig, because if he had a set of these fitted to his bike when he dropped it he wouldnt written if off.

Dont be a Craig : We have designed these to be the best bars on the market - with the 2 interconnecting cross bars, plus the highly buttressed welding on the mounting brackets these are proper hardcore compared to some of the more "dresser" bars you might see on the market . Built to Survive.  

25MM O/D SS TUBING

BLACK VERSION

v2 fits the following models:

• Bobber
• T120 T100 Lc
• Speed Twin 900
• Speed Twin 1200
• Thruxton 1200
• Street Twin 

MC Part ID: MCB018

These clamps precision machined out of billet aluminum and sold as a pair allow you to mount your M8 Indicator or Rear Lights to any 16mm frame tube or strut 

In this case 16mm is the same diameter as used on the stock Triumph Bobber Fender Struts 

MC Part ID: PXN016

Part of our new series of rear Light Clamps

These clamps work an any 13mm diameter rail or Strut - such as found on our Triumph Bobber RIALTO Rear mudguard guard 

MC Part ID: PXN013

This is our latest creation, the TELSTAR Low-profile Gas Cap

The TELSTAR actually works as both a VENTED and NON-VENTED Gas Cap as it can be assembled with the Vents open or closed, which means besides working on any modern Triumph Twin its also works on custom choppers, Harley Tanks as well as the BMW R18

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for grip

FITS ALL YEARS BONNEVILLE THRUXTON, AMERICA, T100, SPEEDMASTER, SE, SCRAMBLER, BOBBER, STREET TWIN, STREET CUP, STREET SCRAMBLER, T120 : 2001 to TODAY

TRIUMPHS WITH STOCK FAUX-MONZAS (SPEED TWIN 1200/SCRAMBLER 1200/THRUXTON 1200) we would recommend the Billet Gas Cap NXS006 and the Adapter Ring instead rather than this one

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018,SPORTSTER, 48, IRON ETC

MC PART ID: MMU658

This is our latest creation, the TELSTAR Low-profile Gas Cap

The TELSTAR actually works as both a VENTED and NON-VENTED Gas Cap as it can be assembled with the Vents open or closed, which means besides working on any modern Triumph Twin its also works on custom choppers, Harley Tanks as well as the BMW R18

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for grip

FITS ALL YEARS BONNEVILLE THRUXTON, AMERICA, T100, SPEEDMASTER, SE, SCRAMBLER, BOBBER, STREET TWIN, STREET CUP, STREET SCRAMBLER, T120 : 2001 to TODAY

TRIUMPHS WITH STOCK FAUX-MONZAS (SPEED TWIN 1200/SCRAMBLER 1200/THRUXTON 1200) we would recommend the Billet Gas Cap NXS006 and the Adapter Ring instead rather than this one

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018,SPORTSTER, 48, IRON ETC

MC PART ID: MMU657

MC PART ID: MMU533

CNC Cut from billet aviation 6061-T6 aluminum - fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars.

Some models it will fit include Bonneville, T100, America, T120, Speedmaster, Thruxton.

MC PART ID: SNG217

CNC Cut from billet aviation 6061-T6 aluminum - fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars.

Some models it will fit include Bonneville, T100, America, T120, Speedmaster, Thruxton.

MC PART ID: SNG216

CNC Cut from billet aviation 6061-T6 aluminum - fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars.

Some models it will fit include Bonneville, T100, America, T120, Speedmaster, Thruxton.

MC PART ID: SNG220

CNC Cut from billet aviation 6061-T6 aluminum - fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars.

Some models it will fit include Bonneville, T100, America, T120, Speedmaster, Thruxton.

MC PART ID: SNG206

MC PART ID: SHN002