MOTORCYCLE PARTS

MOTONE SIDEKICK SLIM (AXLE-MOUNT) SIDE MOUNT NUMBER PLATE KIT (NO TAIL LIGHT VERSION) - US SPEC VERTICAL PLATE

$199.99

Fits any LC 2016 and up Triumph Twin

SIDEKICK SLIM - This is the SLIM version for Vertical Orientation USA Spec License Plates

We have made several versions of this kit - this version includes a license plate light but no tail light, we also have a tail light version

Kits Consists of

Axle Plate Bracket - Forged Stainless Steel (MMU607)
SLIM USA SPEC Side Mount Plate Mount Kit - Laser Cut Aluminium - Black Powder Coat (MMU618)
The Pillbox - our E-Marked Street Legal Micro LED License Plate Light - 6061 Billet Aluminium and 120cm of wiring cable with 3.9mm bullet connector terminals

The Number plate itself mounts to Axle Plate Bracket using counter sunk screws which are provided - the plate has counter sunk holes at various levels so you can set it at a suitable height for the size of your number plate on your bike.

The Pillbox Light is designed to Plug and Play directly into any Motone rear wiring loom plug and play adapters

For Example this one DDM016 for the BOBBER/Speedmaster/Scramber 1200/Speed Twin 1200 EURO4

Or For Street Twin/Speed Twin 900/T100/T120 this one DDM021

Or Speed Twin 1200 EURO5 This one DDM017

MC Part ID: MMU607+MMU618+MLP001

MOTONE SIDEKICK SLIM (AXLE-MOUNT) SIDE MOUNT NUMBER PLATE KIT (NO TAIL LIGHT VERSION) - US SPEC VERTICAL PLATE

MOTONE BILLET RADIATOR GUARD KIT - UNION JACK - BLACK SCRAMBLER 1200 VERSION

$259.99

Motone Rad Guard - Special Version ONLY for the Triumph Scrambler 1200 (all variants X, XE, XC ETC)

Casing precision milled out of 6061T Billet Aluminium and then anodized a matte black.

Rear grill is laser cut out of steel and finished in a black powder coat.

Full assembly comes ready to fit to your bike as a complete kit.

MC PART ID: KNS003

MOTONE BILLET RADIATOR GUARD KIT - UNION JACK - BLACK SCRAMBLER 1200 VERSION

MOTONE FASTBACK CAFE RACER SEAT - BLACK

$699.99

FASTBACK Seat - Available here Black

This is our proper CAFE RACER Seat for your modern Bonneville

24 months in development

Seat works with all known configurations of tail tidies and rear mudguard setups including the stock ones however in our opinion for optimal looks it matches best with a short rear fender or a tail tidy with something like the Gort Light as pictured.

Injection molded ABS seat base - Gloss Black Automotive Paint

Injection molded high density polyurethane foam

This Seat Fits 2016 and up : Street Twin / Speed Twin 900 / Street Cup / Street Scrambler /Scrambler 900 / T100 LC / T120

This Seat is specifically designed for the above frame and will not fit other frames (like the Speed Twin 1200, etc) - but if you nag Motone, they might make a version for your bike as well ;)

MC PART ID: MSM041

MOTONE "THE CLAW" REAR NUMBER PLATE HANGER - TRIUMPH LC - HORIZONTAL PLATE

$339.99

This is the CLAW

Fits using the rear axle adjuster mount point - coupled with bent steel bars which have the number plate hanger aligned in the centre of rear wheel.

It comes with a laser cut plate for the number plate as well as our billet e-marked (lab tested street legal) PILLBOX LED Plate illumination light. This has a 120cm of cable and terminates into Japanese spec 3.9mm Bullets.

The CLAW fits on any Triumph Twin from 2016 to now - we also make plug and play wiring loom adapters for all these bikes depending on which model you have

DDM021: Street Twin, Speed Twin 900, Street Scrambler, Scrambler 900, T100 LC, T120, Speed Twin 1200 EUR4 Only (rwu fork)

DDM016: Bobber, Speedmaster, Scrambler 1200

DDM017: Speed Twin 1200 - EUR5 onwards

MC PART ID: MCB031+MMU604+MLP001

MOTONE "THE CLAW" REAR NUMBER PLATE HANGER - TRIUMPH LC - HORIZONTAL PLATE

MOTONE TAIL TIDY KIT FOR AC TRIUMPH TWINS 2001-2015 - ELDORADO KRACKLE BLACK

$259.99

This kit is a solution to the gigantic factory rear mudguard - Completely changes the look of the bike - for the better.

Kit Consists of :

Eldorado Matte Krackle Black Tail Light - LED
Rear Mudguard/Fender Elimination Tail Tidy - Aluminium Hard Powder Coated Black
Plug and play rear wiring loom adapter harness

Tail tidy Kit fits Without any drilling required. Bolt On.

FITS ALL YEARS HINCKLEY BONNEVILLE T100/SE/SCRAMBLER/THRUXTON : 2001-2015 - Fits both CARB and EFI bikes.

MC PART ID: CBS-T-002+MEL021+DDM002

MOTONE TAIL TIDY KIT FOR AC TRIUMPH TWINS 2001-2015 - ELDORADO KRACKLE BLACK

MOTONE ICON LED T/S INDICATOR TURN SIGNALS - PAIR - BLACK - M8

$259.99

MOTONE ICON LED T/S : TURN SIGNAL / INDICATORS

SOLD HERE : PAIR [2 TURNSIGNALS]

ECE R148 - LAB TESTED FULLY COMPLIANT ROAD LEGAL
CUSTOM PCB
FULL METAL JACKET - ALUMINIUM HOUSING
ORSAM SMD LED
BRAIDED CABLES TERMINATING IN 3.9MM BULLET CONNECTORS
WATERPROOF
RUBBER BOOT CABLE TIDY
INPUT : DC 13.5v
Power : 2.7 W Indicator
PMMA LENS
SIZE W 44 x H 87.5 x D 6r.6 mm
MOUNTED ONTO A M8 THREAD

Combine with various brackets and adapters we make to fit anywhere on your bike we are working on more options all the time

Brackets for front of bike:

Billet Adapter Brackets mount M8 Indicators such as the PICO direct to stock Triumph Indicator position (2016 and up bikes)
Clampit Brackets to mount to front fork 41mm (other sizes also coming)
Boomerang Bracket - fits on the bottom yoke suitable for the Street Twin/Speed Twin 900

Brackets for rear of bike:

V2 Shock Mount Brackets to mount to rear shock
Under Seat Brackets LC Triumph - Use the bolt holes under the rear of the seat to fit Indicators towards rear of frame - Liquid Cooled Bonneville so 2016 to 2025+)
Under Seat Brackets AC Triumph - Under seat brackets for the aircooled (2001-2015) Bonnevilles
Triline Brackets to mount to Rear Shock
Ajax - Designed specifically for the Triumph Bobber these brackets allow you to fit signals onto the rear of the bike using the airbox bolts
Number Plate Brackets - Adapter Brackets that allow the lights to be fit direct to your rear number plate bracket without needing to drill any holes etc

Wiring Adapters

Please note if you have one of our tail tidies or rear loom adapters they would already terminate in a 3.9mm Bullet so plug and play from there one

DDM011: Wiring Adapter to Convert to OE Triumph Wiring Plugs (2016 to 2025+)
DDM004: Wiring Adapter to Convert to OE Triumph 2001-2015
DDM014 Wiring Adapter for Royal Enfield 650
DDM005 Wiring Adapter for Royal Enfield Meteor/Hunter 350

MC PART ID: MFX001

MOTONE ICON LED T/S INDICATOR TURN SIGNALS - PAIR - BLACK - M8

MOTONE X-PIPE LITE CAT-DELETE EXHAUST SYSTEM LC

$219.99

This x-pipe is designed to be fit in place of the stock catalytic converter at the base of your bike, unleashing the power your engine was naturally designed to produce.

THIS IS THE LITE VERSION - NO EXTRA BRACKETS FOR REFITTING ORIGINAL COVERS

Suitable for both the 900 and 1200cc powerplant you can expect large gains for minimal effort.

Suitable for all the Euro 4 Triumph Twin range 2016 and up except the Street Scrambler which of course has the high pipes.

Fits Eur4: T100 LC, T120, Street Twin, Street Cup, Thruxton R, Thruxton S, Bobber, Speedmaster

Fits Eur 5: Bobber/Speedmaster except 2025 Bobber TFC

Please note it will not fit Eur5 T100/t120/Speed Twin with the link pipes welded to the cat (at least not without new link pipes as well)

We do make link pipe kits for most of those models (xpipe plus link pipes called xpipe plus)

PLEASE NOTE - the following EURO 5 BIKES (Solid from year 2021 on) have link pipes welded to the stock cat which means to remove cat you have to replace not only the cat but the link pipes (and mufflers) as well.

2021 and UP : STREET TWIN/T100/T120/THRUXTON RS/SPEED TWIN - NEED NEW VERSION

HOWEVER If you have a BOBBER or SPEEDMASTER you can still run the stock mufflers with the X-Pipe no problem as the link pipes are not welded to the cat on any year, with the exception of the 2025 Bobber TFC.

TO BE CLEAR : MOTONE XPIPE DESIGN FITS ALL YEARS BOBBER AND SPEEDMASTER, except the 2025 Bobber TFC which has the cat welded to the mid pipes. As such, if you have a 2025 TFC Bobber, this x-pipe will NOT work.

MC PART ID: MTE120

MOTONE X-PIPE LITE CAT-DELETE EXHAUST SYSTEM LC

MOTONE VOYAGER REAR RACK - FOR TRIUMPH BOBBER / INDIAN SCOUT / HARLEY / BMW R18 - BLACK

$219.99

Formed out of Type 304 Stainless Steel and Powder Coated Black

Touring rack including all the lugs and mounting points as pictured

Comes with hardware/fixings and rubbers

Remove your stock mudguard and drill in 4 places to fit.

Voyager Universal Rack works with a bunch of different spec rear Mudguards/fenders

As the lugs are rubber mounted there is some tolerance in them for fixing to different diameter fenders - typically this would fit on a fender that is around a tyre for a 15 or 16 inch diameter wheel - Triumph Bobber, Indian Scout Bobber, Typical Harleys as well as custom Japanese chops etc.

Also fits well on the R18 BMW

MC PART ID: MMU540

MOTONE VOYAGER REAR RACK - FOR TRIUMPH BOBBER / INDIAN SCOUT / HARLEY / BMW R18 - BLACK

MOTONE CLUTCH (LHS) COVER/BADGE - RIBBED - BLACK/POLISH CONTRAST FINISH

$89.99

Motone Quality - High Pressure Die Cast Engine Clutch Side Engine Cover

Ribbed Design with polished fins - Black paint on lower face to match the factory black used throughout the bike

Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today: Street Twin, Street Cup, Street Scrambler, Scrambler 1200, Bonneville Bobber, T100 , T120, Thruxton, Speedmaster, Speed Twin

MC PART ID: MMU036

MOTONE POINTS ACG COVER/BADGE - RIBBED - BLACK/POLISH CONTRAST FINISH

$89.99

Motone Quality - HIGH PRESSURE PRECISION DIE CAST

This cover is for the ACG (What was once known as the "Points" Cover on the Vintage Meriden Triumphs) - The smaller of the two round engine covers. Clutch Side Badges/Covers are also available.

Wrinkle Black Paint with Contrast Mirror Polished Outer Surface

Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today: Street Twin, Street Cup, Street Scrambler, Scrambler 1200, Bonneville Bobber, T100 , T120, Thruxton, Speedmaster, Speed Twin

MC PART ID: MMU026

MOTONE MAGNUM FORCE EXHAUST CLAMP NUTS - BRASS

$44.99

Magnum Force Forged Brass Exhaust Clamp Stud Nuts

Set Of 4 - Hot Forged Individually out of solid Brass

Will fit all the 2001 to Now Triumph Twins

Street Twin / Street Cup / Street Scrambler / Scrambler 1200 / Thruxton / Speed Twin / Bobber / T100 / T120 / SE / Scrambler 900 / Speed Twin 900 etc

MC PART ID: MMU080

MOTONE MAGNUM FORCE EXHAUST CLAMP NUTS - BRASS

MOTONE T120/T100 "JUPITER-2" EXHAUST TIP KIT - BRASS

$219.99

Exhaust Tips and Adapter Bracket kit for 2016 and up Triumph T100 and T120 Motorsickles - We Call these the Jupiter-2 and this is the BRASS version

Remove you stock mufflers and replace with these Solid Brass Forged Tips - including Stainless steel adapter brackets and hardware

MC PART ID: MMU529

MOTONE T120/T100 "JUPITER-2" EXHAUST TIP KIT - BRASS

MOTONE BILLET RADIATOR GUARD KIT 400 - UNION JACK - BLACK

$259.99

Motone Rad Guard for all Liquid Cooled Triumph 400 Singles

Casing precision milled out of 6061T Billet Aluminium and then anodised a matte black.

Rear grill is laser cut out of steel and finished in a black powder coat.

Full assembly comes ready to fit to your bike as a complete kit.

Good for all the 400cc Triumphs

MC PART ID: KNS004

MOTONE BILLET RADIATOR GUARD KIT 400 - UNION JACK - BLACK

MOTONE "THE GUVNORS" - FORK TOP CAPS FOR LATE STREET TWIN & STREET SCRAMBLER, ALL T120 - BRASS

$169.99

Hot Forged out of Solid Brass, Machined and then Mirror Polished - The Guvnors are designed to complement the Brass Boss Yoke Nut

Please Check Specific Bike Model and Year before purchasing as these as they vary per bike.

This version is for

T120
Speed Twin
Thruxton 1200,
Speedmaster 1200 (2018-2020) with 41mm Fork
T100 2019-PRESENT
Street Twin "late"
Street Scrambler "late"

By "Late" we mean: 2019 to Present "late" model Street Twin (vin over 914974 and Street Scrambler (vin over 914974) - Bikes with the regulator located in front of the radiator not under the yoke.

We also make these parts for other Triumph Twins as below :

For Air Cooled Triumph Twins (2001-2015), Early (2016-2018) Street Twin and Street Scrambler, Triumph Bobbers with Single Disc, please see Part MMU512

For 47mm Fork Bobber (Bobber Black 2018-Present) and Speedmaster (2021-Present) See Part MMU516

MC Part ID: MMU514

MOTONE "THE GUVNORS" - FORK TOP CAPS FOR LATE STREET TWIN & STREET SCRAMBLER, ALL T120 - BRASS

MOTONE CLUTCH (LHS) COVER/BADGE - UNION JACK - SOLID BRASS

$134.99

Motone Quality - Hot Forged in Solid Brass

Union Flag Motif

This cover is for the CLUTCH side (the larger round badge on the left hand side of the bike)

Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today

Street Twin
Street Cup
Street Scrambler
Scrambler 1200
Bonneville Bobber
T100
T120
Thruxton
Speedmaster
Speed Twin

MC PART ID: MMU539

MOTONE CLUTCH (LHS) COVER/BADGE - RIBBED - BLACK

$89.99

Ribbed Clutch/Primary Side Engine Cover/Badge suitable for all the 900 and 1200cc Triumph Twins from 2016 to now.

Motone Quality - High Pressure Precision Die Cast and finished in a wrinkle black to match the engine paint.

We took inspiration from the 1960s US Triumph tuning company Webco (who in turn were inspired by Mangus and others before them) to create this new range of finned engine parts. Unlike the vintage Triumph-aftermarket companies who generally employed a low grade kind of sandcasting at Motone we employ only high spec precision high pressure die casting - this means we can control the perfect size of our product every time and dont have to worry about porousity and shrinkage and things like that which you would when doing sand cast. Thats how come Motone die cast parts are the best out there.

Precision fit part - Bolt on - Fit at home

Fits all the new twins : Street Twin, Street Cup, Street Scrambler, T100, T120, Scrambler 1200, Speed Twin, Bobber, Speedmaster

MC PART ID: MMU037

MOTONE TPS CARB/THROTTLE BODY COVER - PAIR - RIBBED - BLACK

$109.99

Sold as a pair. Made using the same technology as the original equipment manufacturing process, high pressure die cast.

Suitable for any of the 1200 twins.

Fits : T120, Thruxton R, Thruxton S, Bobber, Speedmaster

Sold here in Black finish

The covers come with 6 brass bolts similar to those found on the original monobloc Amal carbs, which were of course the inspiration for the look of the throttle body that Triumph has employed on these motors - fitment of the brass bolts is optional - you can also reuse your stock silver bolts.

MC PART ID: MMU017

MOTONE TPS CARB/THROTTLE BODY COVER - PAIR - RIBBED - BLACK

MOTONE SHOCK MOUNT FINISHING KIT - BRASS

$74.99

Turned out of Billet Brass

A simple yet elegant solution to improve the look on the top and bottom shock mounts over the factory Triumph setup.

Includes all stainless bolts.

Available here BRASS as pictured.

Fits T100 / T120 / Street Twin / Thruxton / Scrambler - All Years 2001-Now

MC PART ID: OTS008

MOTONE SHOCK MOUNT FINISHING KIT - BRASS

MOTONE CUSTOM MUDGUARD PREDRILLED FOR FENDER MOUNT LIGHT KITS - LC - BLACK

$339.99

Machine rolled out of 5052 Aluminium, Trimmed, Drilled and then Black Anodised - this rear mudguard is bolt-on for your Triumph Bonneville.

This version of the fender comes pre drilled ready to mount any of the Motone Fender Mount Light Kits (Eldorado, Bel Air, Lecter, Cuda, Big Fin etc)

It also has a hole for wiring loom (we recommend our part code DDM012) to pass through

Fits 2016 and Up

Bonneville T100
Bonneville T120
Street Cup
Street Twin
Street Scrambler

Fender measures 570mm (22.5 inches) long measuring along the circumference from front to back.

180mm in width (7 inches)

MC PART ID: MTE151

MOTONE CUSTOM MUDGUARD PREDRILLED FOR FENDER MOUNT LIGHT KITS - LC - BLACK

MOTONE T120/T100 "JUPITER-2" EXHAUST TIP KIT - POLISHED

$169.99

Exhaust Tips and Adapter Bracket kit for 2016 and up Triumph T100 and T120 Motorsickles: We call these the Jupiter-2.

Remove your stock mufflers and replace with these High Pressure Die Cast Tips - Finished in POLISHED FINISH
- including Stainless steel adapter brackets and hardware

MC PART ID: MMU531

MOTONE T120/T100 "JUPITER-2" EXHAUST TIP KIT - POLISHED

MOTONE TURN SIGNAL WIRING ADAPTER - TRIUMPH 400 / RE HIMALAYAN / METEOR / HUNTER

$29.99

Sold as a Pair for a set of 2 Indicators this converts the proprietary plug used in your bike to a more standard "Japanese style" 3.9mm Bullet Connector (as used on most aftermarket indicators including Motone)

Fits Royal Enfield - Himalayan - the Meteor and the Hunter

Fits TRIUMPH 400 FRONT ONLY - Speed 400 / Scrambler 400 X

MC PART ID: DDM005

MOTONE TURN SIGNAL WIRING ADAPTER - TRIUMPH 400 / RE HIMALAYAN / METEOR / HUNTER

MOTONE ELDORADO TAIL LIGHT + FENDER MOUNT KIT - MATTE KRACKLE BLACK

$149.99

Works as Running Light, Brake Light and Number plate illumination through window on underside. Designed to look good on all kinds of cafe racers, hot rods, bobbers etc.

Diecast Aluminium with a Black Finish
Fully E-Marked for Homologation.
Full SMD-LED circuit board.
Wired as follows:

Yellow = RUNNING light
Red = STOP light
Black = Earth

Sold here as kit which includes matching cast Rear Fender Mount Bracket, Rubber Gasket and Stainless Bolts.

Can be combined with Motone rear fenders (e.g. high-tail custom mudguard) and license/number plate brackets (e.g. round light bracket). Requires a wiring loom which can be purchased separately (e.g. DDM012).

MC PART ID: MEL021+MEL022

MOTONE ELDORADO TAIL LIGHT + FENDER MOUNT KIT - MATTE KRACKLE BLACK

MOTONE FORTYNINER UNDERBELLY STYLING KIT - GLOSS BLACK

$289.99

Inspired by Colin Chapmans Lotus Type 49 Nose Cone this is the FORTYNINER - Underbelly/Airscoop Styling Kit for your modern classic - Injection Molded ABS and Painted Automotive Gloss Black with aluminum Mesh

FORTYNINER Suitable for 2016 and Up Modern Classic Triumph motorcycles

Street Cup

Street Twin

Street Scrambler

Speed Twin 900/1200

Thruxton 1200/R/RS

T100

T120

MC PART ID: MTE217

MOTONE FORTYNINER UNDERBELLY STYLING KIT - GLOSS BLACK

MOTONE "THE VIPER" MKII (DOUBLE STITCH) LOW PROFILE SKINNY RIBBED SEAT - BLACK

$499.99

The Viper Mk.II (Double Stitch) - Available here Black

Slim cut low profile bench seat - the idea with this seat was to keep it as neat and trimmed back to the proportions of the frame as possible whilst maintaining optimal comfort

Injection molded ABS seat base

Injection molded high density high comfort polyurethane foam

This Seat Fits 2016 and up :

Street Twin / Street Cup / Street Scrambler / T100 / T120 / Speed Twin 900 (up to 2024) / Scrambler 900

Please Note SPEED TWIN 900 2025+ has new chassis/frame so this seat wont fit (new version coming)

If you have a bike that is earlier than 2016 check out the Krait

MC PART ID: MSM038

MOTONE RANGER FOOT PEGS - FULL RIDER SET & PASSENGER PEGS FOR LC TRIUMPHS - BLACK

$279.99

Ranger Foot Pegs - Investment Cast Grade 304 Stainless finished in Black Powder

Full Set for both Rider and Passenger

Suitable for 2016 to NOW

Street Twin / Street Cup / Street Scrambler / T100 / T120 / Speed Twin / Thruxton

MC PART ID: MMU500

MOTONE RANGER FOOT PEGS - FULL RIDER SET & PASSENGER PEGS FOR LC TRIUMPHS - BLACK

MOTONE INDICATOR/TURN SIGNAL BRACKETS FOR TRIUMPH 400 - FRONT ONLY - 8MM

$64.99

Sold as a pair.

CNC Machined out of Billet Aluminium and Anodised Black

These adapters fit directly onto the stock Indicator Mounts to allow you to fit an aftermarket Indicator with a regular 8mm Thread.

The final position angle of your indicator is controlled by a stainless grub screw which locks the Indicator light in place.

This version is for Indicators with 8mm Threads (Such as our ICON and PICO indicators as well as many others)

This product for Indicators/Turn Signals with 8mm Threads.

This is Specific fitment for the TRIUMPH 400 (400X, Speed 400, etc) - FRONT Indicators Only - Different version for rear - See ADT005 for rear version

MC PART ID: ADT004

MOTONE INDICATOR/TURN SIGNAL BRACKETS FOR TRIUMPH 400 - FRONT ONLY - 8MM

MOTONE INDICATOR/TURN SIGNAL BRACKETS FOR TRIUMPH 400 - REAR ONLY - 8MM

$64.99

Sold as a pair.

CNC Machined out of Billet Aluminium and Anodised Black

These adapters fit directly onto the stock Indicator Mounts to allow you to fit an aftermarket Indicator with a regular 8mm Thread.

The final position angle of your indicator is controlled by a stainless grub screw which locks the Indicator light in place.

This version is for Indicators with 8mm Threads (Such as our ICON and PICO indicators as well as many others)

This product for Indicators/Turn Signals with 8mm Threads.

This is Specific fitment for the TRIUMPH 400 (400X, Speed 400, etc) - REAR Indicators Only - Different version for Front - See ADT004 for front version

MC PART ID: ADT005

MOTONE INDICATOR/TURN SIGNAL BRACKETS FOR TRIUMPH 400 - REAR ONLY - 8MM

MOTONE RANGER FOOT PEGS - RIDER SET FOR TRIUMPH BOBBER - BRASS

$339.99

HOT FORGED OUT OF BRASS

These are the Rangers - Now available for your Triumph Bobber

These will not fit the Speedmaster if you are running forward controls (if you have moved the pegs back to Bobber mid position then they will fit ok)

All good with all years Triumph Bobber

LIMITED Availability

MC PART ID: MMU581

MOTONE RANGER FOOT PEGS - RIDER SET FOR TRIUMPH BOBBER - BRASS

MOTONE MONZA CAP KIT FOR TRIUMPH & HD - BRUSHED

$184.99

Supplied here with cap in BRUSHED finish

Kit Suitable for

Triumph Twins 2001-2015 (T100, Thruxton, SE, Scrambler)
Triumph Twins 2016-Present (Bobber, T100, T120, Street Cup, Street Twin etc)
Harley Davidson 1983 and Up (Sportster, Dyna, etc)
Moto Guzzi V7
Royal Enfield Classic (with screw top type filler bung)

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THESE BIKES (IN BLACK OR POLISH)

Monza cap built by Motone using modern HIGH PRESSURE DIE CAST technology

Triumph/HD Fuel tank adapter kit CNC formed out of billet aviation grade aluminium

INSTRUCTIONS HERE

MC PART ID: NMX003+NMX013

MOTONE MONZA CAP KIT FOR TRIUMPH & HD - BRUSHED

MOTONE UP-AND-OVER RISER KIT FOR ONE INCH BARS - CLEAR ANODISED

$259.99

Bolt on Replacement for the Stock Riser Clamp assembly which works on any of the Triumph Bonneville family which have one inch bars.

We originally designed the Up-And-Over Kit to give you a one inch rise and a one inch pull back over standard bar position. This is about as far as you can take the stock bars without having to install longer cables.

Easy to fit at home with basic tools.

Fits : T100 (all years aircooled and liquid cooled), T120, Speedmaster (air and liquid cooled models), Bobber, Thruxton EFI, America

MC PART ID: MTE088+MTE070

MOTONE UP-AND-OVER RISER KIT FOR ONE INCH BARS - CLEAR ANODISED

MOTONE SKIRMISH MINI RACK/GRAB RAIL - POLISHED

$299.99

Formed out of 300 Series Stainless Steel and designed to fit on your 2016 and up Triumph Twin

This is the Skirmish! Our handly little Mini Rack/Passenger Grab Rail/In Garage Parking assistant - We made this so if you want to pop out for a quick trip to the shop to grab a 6 pack/coincidentally taking cover from your family well now you have a slightly better excuse - unlike all the other racks we have seen out there we also included a couple of handy latch tie downs position points

The Rail is also useful for parking the bike in confined space as well as for any passenger.

Street Twin / Speed Twin 900
Street Scrambler / Scrambler 900
Street Cup
T100
T120

***NEWLY UPDATED - THIS IS V2.0 OF THE SKIRMISH RACK WHICH FITS MOST KNOWN SEATS***

✅DOES FIT ALL OE STREET TWIN, SPEED TWIN 900, STREET SCRAMBLER, SCRAMBLER 900 SEATS

✅DOES FIT ALL MOTONE AND ALL KNOWN AFTERMARKET SEATS

✅DOES FIT OEM T100/T120 TRIUMPH QUILTED & RIBBED BENCH SEAT

✅ DOES FIT OEM T100/T120 OE "COMFORT" SEAT

If you have a pre 2016 bike we will have a version out for your bike at some point, please don't buy this on the off chance it will fit - the bolt holes are in different positions.

Unfortunately the Speed Twin 1200 has a different subframe so won't fit.

MC PART ID: MCB025

MOTONE SKIRMISH MINI RACK/GRAB RAIL - POLISHED

MOTONE MONZA CAP KIT FOR TRIUMPH & HD - BLACK

$184.99

Supplied here with cap in BLACK

Kit Suitable for

Triumph Twins 2001-2015 (T100, Thruxton, SE, Scrambler)
Triumph Twins 2016-Present (Bobber, T100, T120, Street Cup, Street Twin etc)
Harley Davidson 1983 and Up (Sportster, Dyna, etc)
Moto Guzzi V7
Royal Enfield Classic (with screw top type filler bung)

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THESE BIKES (IN BLACK OR POLISH)

Monza cap built by Motone using modern HIGH PRESSURE DIE CAST technology

Triumph/HD Fuel tank adapter kit CNC formed out of billet aviation grade aluminium

INSTRUCTIONS HERE

MC PART ID: NMX003+NMX014

MOTONE MONZA CAP KIT FOR TRIUMPH & HD - BLACK

MOTONE MICROBLADE ALUMINIUM SCREEN GLOSS BLACK FINISH

$319.99

Drawn out of sheet 5052 Aluminium and then GLOSS BLACK finished.

So far known to fit - T100, T120 all years , Thruxton 900, Thruxton 1200, Speed Twin 1200 19-20, Royal Enfield Interceptor, Speed 400, Scrambler 400X, Scrambler 1200 X / XE / XC

Note: Does NOT fit street twin / speed twin 900 / Speed Twin 1200 21+

Different version coming for Speed Twin and Street Twin

MC PART ID: MTE187

MOTONE MICROBLADE ALUMINIUM SCREEN GLOSS BLACK FINISH

MOTONE TELSTAR LOW PROFILE FUEL GAS CAP - BILLET ALUMINIUM - BLACK

$129.99

This is our latest creation, the TELSTAR Low-profile Gas Cap

The TELSTAR actually works as both a VENTED and NON-VENTED Gas Cap as it can be assembled with the Vents open or closed, which means besides working on any modern Triumph Twin its also works on custom choppers, Harley Tanks as well as the BMW R18

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for grip

FITS ALL YEARS BONNEVILLE THRUXTON, AMERICA, T100, SPEEDMASTER, SE, SCRAMBLER, BOBBER, STREET TWIN, STREET CUP, STREET SCRAMBLER, T120 : 2001 to TODAY

TRIUMPHS WITH STOCK FAUX-MONZAS (SPEED TWIN 1200/SCRAMBLER 1200/THRUXTON 1200) we would recommend the Billet Gas Cap NXS006 and the Adapter Ring instead rather than this one

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018,SPORTSTER, 48, IRON ETC

MC PART ID: MMU656

MOTONE TELSTAR LOW PROFILE FUEL GAS CAP - BILLET ALUMINIUM - BLACK/CONTRAST POLISHED

$129.99

This is our latest creation, the TELSTAR Low-profile Gas Cap

The TELSTAR actually works as both a VENTED and NON-VENTED Gas Cap as it can be assembled with the Vents open or closed, which means besides working on any modern Triumph Twin its also works on custom choppers, Harley Tanks as well as the BMW R18

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for grip

FITS ALL YEARS BONNEVILLE THRUXTON, AMERICA, T100, SPEEDMASTER, SE, SCRAMBLER, BOBBER, STREET TWIN, STREET CUP, STREET SCRAMBLER, T120 : 2001 to TODAY

TRIUMPHS WITH STOCK FAUX-MONZAS (SPEED TWIN 1200/SCRAMBLER 1200/THRUXTON 1200) we would recommend the Billet Gas Cap NXS006 and the Adapter Ring instead rather than this one

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018,SPORTSTER, 48, IRON ETC

MC PART ID: MMU658

MOTONE TELSTAR LOW PROFILE FUEL GAS CAP - BILLET ALUMINIUM - POLISHED

$129.99

This is our latest creation, the TELSTAR Low-profile Gas Cap

The TELSTAR actually works as both a VENTED and NON-VENTED Gas Cap as it can be assembled with the Vents open or closed, which means besides working on any modern Triumph Twin its also works on custom choppers, Harley Tanks as well as the BMW R18

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for grip

FITS ALL YEARS BONNEVILLE THRUXTON, AMERICA, T100, SPEEDMASTER, SE, SCRAMBLER, BOBBER, STREET TWIN, STREET CUP, STREET SCRAMBLER, T120 : 2001 to TODAY

TRIUMPHS WITH STOCK FAUX-MONZAS (SPEED TWIN 1200/SCRAMBLER 1200/THRUXTON 1200) we would recommend the Billet Gas Cap NXS006 and the Adapter Ring instead rather than this one

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018,SPORTSTER, 48, IRON ETC

MC PART ID: MMU657

MOTONE FINNED EXHAUST CLAMPS - LC - SOLID BRASS LTD EDITION

$259.99

VERSION 2.0 - INVESTMENT CAST LIMITED EDITION BRASS EDITION!

By popular demand we are making a small limited run of our Big Fin clamps in Solid Brass finish - They are hand polished and only available in very limited batches

These fit all the 900 and 1200 cc Triumph Twins except the stock headers on Thruxton 1200 /Speed Twin 1200 which have a link pipe at the exhaust port which gets in the way. (if you have an aftermarket exhaust system then likely they will fit even on the Thrux/Sp1200)

These fit

2016 and UP : Speed Twin 900, Street Twin, Street Cup, Street Scrambler, Scrambler 900, Speedmaster, Bobber, T100, T120, Scrambler 1200

MC PART ID: MMU533

MOTONE FINNED EXHAUST CLAMPS - LC - SOLID BRASS LTD EDITION

MOTONE BILLET DISC BRAKE OIL RESERVOIR MASTER CYLINDER CAP - MODERN LOGO - BLACK

$79.99

CNC Cut from billet aviation 6061-T6 aluminum - fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars.

Some models it will fit include Bonneville, T100, America, T120, Speedmaster, Thruxton.

MC PART ID: SNG217

MOTONE BILLET DISC BRAKE OIL RESERVOIR MASTER CYLINDER CAP - MODERN LOGO - POLISHED

$79.99

CNC Cut from billet aviation 6061-T6 aluminum - fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars.

Some models it will fit include Bonneville, T100, America, T120, Speedmaster, Thruxton.

MC PART ID: SNG216

MOTONE BILLET DISC BRAKE OIL RESERVOIR MASTER CYLINDER CAP - MODERN CLASSIC LOGO - POLISHED

$79.99

CNC Cut from billet aviation 6061-T6 aluminum - fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars.

Some models it will fit include Bonneville, T100, America, T120, Speedmaster, Thruxton.

MC PART ID: SNG220

MOTONE BILLET DISC BRAKE OIL RESERVOIR MASTER CYLINDER CAP - UNION JACK - POLISHED

$79.99

CNC Cut from billet aviation 6061-T6 aluminum - fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars.

Some models it will fit include Bonneville, T100, America, T120, Speedmaster, Thruxton.

MC PART ID: SNG206

MOTONE BILLET DISC BRAKE OIL RESERVOIR MASTER CYLINDER CAP - UNION JACK - POLISHED

MOTONE TWISTER TITANIUM CLUTCH CABLE ADJUSTER - BLACK - M8x1.25x18

$64.99

Part of our Titanium range of components. This is the TWISTER

Precision machined out of Billet GR5 Titanium - these Clutch Cable adjusters fit all Triumphs and replace the stock units that are prone to rusting up. Finished here in Physical Vapour Deposition BLACK

Running an an M8 Thread they likely will also fit other Makes and Models of bikes as well

MC PART ID: SHN002

MOTONE TWISTER TITANIUM CLUTCH CABLE ADJUSTER - BLACK - M8x1.25x18

MOTONE RANGER FOOT PEGS - FULL RIDER SET & PASSENGER PEGS FOR LC TRIUMPHS - POLISHED

$279.99

Ranger Foot Pegs - Cast in Stainless Steel which has been polished.

Full Set for both Rider and Passenger

Suitable for 2016 to NOW

Street Twin / Street Cup / Street Scrambler / T100 / T120 / Speed Twin / Thruxton

MC PART ID: MMU522

MOTONE RANGER FOOT PEGS - FULL RIDER SET & PASSENGER PEGS FOR LC TRIUMPHS - POLISHED

MOTONE TPS CARB/THROTTLE BODY COVER - PAIR - RIBBED/FINNED - BRASS

$139.99

Sold as a pair. Made in small volume using old school hot forged brass

Available when in stock, when out of stock buy button will be replaced by an option to leave your email address

Suitable for any of the 1200 twins.

Fits : T120, Thruxton R, Thruxton S, Bobber, Speedmaster, Scrambler 1200

MC PART ID: MMU508

MOTONE TPS CARB/THROTTLE BODY COVER - PAIR - RIBBED/FINNED - BRASS

MOTONE GORT LED TAIL LIGHT - KRACKLE MATTE BLACK

$114.99

Gort!

Full SMD-LED circuit board.

Works as Running Light, Brake Light and Number plate illumination through window on underside.

Diecast Aluminium with a Gloss Black Finish

Fully E-Marked for Homologation.

Wired as follows :

Yellow = RUNNING light

Red = STOP light

Black = Earth

MC PART ID: MEL525

MOTONE GORT LED TAIL LIGHT - KRACKLE MATTE BLACK

MOTONE HELMET LOCK - TRIUMPH BOBBER/SPEEDMASTER

$89.99

This is the latest version of our popular helmet lock kit - with a specific cast bracket to fit on your TRIUMPH BOBBER (or late model Speedmaster)

Fits all years Triumph Bobber 2017-2026+

Designed to fit on the stock airbox lugs - the kit works both on a completely stock bike or in conjunction with AJAX rear light/signal brackets which also use the same mounting point.

Can be fit at the same time as our pannier rails

Kit comes with 2 Keys

MC PART ID: MMU667+MMU520

MOTONE HELMET LOCK - TRIUMPH BOBBER/SPEEDMASTER

MOTONE IGNITION RELOCATION KIT - BRACKET & LOOM - FOR LC T100, T120, AND 2016-2024 STREET TWIN/SPEED TWIN 900

$139.99

Ignition Relocation kit

Known to fit

Street Twin 900
Speed Twin 900 Up to 2024
T100 LC
T120

May fit more models we are testing soon and will update page

Kit consists of a forged aluminium bracket that fits on top of the Sprocket Cover which allows you to relocate your ignition unit down from the yoke

It also includes a plug and play loom that replicates the plugs in the Ignition barrel to give you the flex to get it into the new position

MC PART ID: MMU593+DDM015

MOTONE IGNITION RELOCATION KIT - BRACKET & LOOM - FOR LC T100, T120, AND 2016-2024 STREET TWIN/SPEED TWIN 900

MOTONE TWISTER CLUTCH CABLE ADJUSTER - BRASS - M8x1.25x18

$64.99

Part of our BRASS range of components. This is the TWISTER - BRASSY edition

Precision machined out of Billet C36000 Brass - these Clutch Cable adjusters fit all Triumphs and replace the stock units that are prone to rusting up.

Running an an M8 Thread they likely will also fit other Makes and Models of bikes as well

MC PART ID: SHN003