GIFTS OVER $200

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

GORE-TEX touring jacket for all-season adventure riding

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, In-boot, off-road, lightweight, flexible riding pants

Meet the Peninsula. A purpose-built pair of active fit pants for riders who prefer to wear their gear tucked inside their boots instead of over them – as part of our DIRT Series collection. The CE-certified pants are constructed of highly abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch on the inside legs, lower legs, and upper knees. This allows for maximum movement and comfort. Our flexible, lightweight, and removable SEESMART™ CE-level 1 protectors are featured at the hips and knees. And when the SEESMART™ armour is removed from the knees, the pants can be worn over our CE-level 2 Scram knee protectors. The Peninsula is also patterned to accommodate aftermarket knee braces underneath. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle while optimal fit is ensured by the ratchet waist closure while the silicon waistband will keep the pants from sliding down. In warmer temperatures, the long ventilation zippers can be zipped open to cool down the rider. And in terms of keeping your essentials close by, storage is provided by cargo pockets at the upper legs.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, In-boot, off-road, lightweight, flexible riding pants

Meet the Peninsula. A purpose-built pair of active fit pants for riders who prefer to wear their gear tucked inside their boots instead of over them – as part of our DIRT Series collection. The CE-certified pants are constructed of highly abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch on the inside legs, lower legs, and upper knees. This allows for maximum movement and comfort. Our flexible, lightweight, and removable SEESMART™ CE-level 1 protectors are featured at the hips and knees. And when the SEESMART™ armour is removed from the knees, the pants can be worn over our CE-level 2 Scram knee protectors. The Peninsula is also patterned to accommodate aftermarket knee braces underneath. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle while optimal fit is ensured by the ratchet waist closure while the silicon waistband will keep the pants from sliding down. In warmer temperatures, the long ventilation zippers can be zipped open to cool down the rider. And in terms of keeping your essentials close by, storage is provided by cargo pockets at the upper legs.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Versatile all-season jacket for adventure riding

Adventure will take you wherever it may, but you still want to feel in control, even on unknown roads and through uncharted terrains. That’s why your motorcycle jacket should be a versatile companion – making your every mile safe, comfortable, and composed. So, if you’re looking for an all-season all-rounder, the Offtrack 2 H2O’s for you. Now you’re dressed to be in control of every adventure. Versatile line-up Confidence-inspiring design puts the focus on your unfolding adventure. When it’s hot out in the wild, well-proportioned VCS|Aquadefence panels increase airflow, while zippers on the forearms and back ventilate your upper body. Should the temperature drop, just zip the detachable thermal liner into the PWR|Shell, PWR|Ripstop outer. And in adverse weather, switch to the hydratex liner to stay dry. The thermal liner & removable waterproof liner are both separate wearable stand-alone jackets. The waterproof liner is also wearable over the top of the outer shell jacket, making the 100% waterproof WL the outermost layer for extreme wet weather conditions. One jacket, three modes; all the versatility. Explore safe Knowing your jacket is keeping you safe helps you enjoy the thrill of adventure riding – that’s the thinking behind the Offtrack H2O jacket. It’s also why it’s equipped with SEEFLEX CE-rated protection at the shoulders and elbows, plus the option of SEESOFT protectors for your back and chest.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

MOTO 3. NOT RETRO. ORIGINAL.

The iconic legend has returned! When the original Moto-3 was created back in the late 70s it was a product ahead of its time. Quickly becoming the industry standard in performance and style, today's Moto-3 is everything it was style-wise, with the added benefits of modern saftey and production advancements. From the fiberglass composite shell to the EPS-lined chin bar, we left no detail unpolished. The solid colors use the original style terrycloth liner, which is removable and washable.

MOTO 3. NOT RETRO. ORIGINAL.

The iconic legend has returned! When the original Moto-3 was created back in the late 70s it was a product ahead of its time. Quickly becoming the industry standard in performance and style, today's Moto-3 is everything it was style-wise, with the added benefits of modern saftey and production advancements. From the fiberglass composite shell to the EPS-lined chin bar, we left no detail unpolished. The solid colors use the original style terrycloth liner, which is removable and washable.

MOTO 3. NOT RETRO. ORIGINAL.

The iconic legend has returned! When the original Moto-3 was created back in the late 70s it was a product ahead of its time. Quickly becoming the industry standard in performance and style, today's Moto-3 is everything it was style-wise, with the added benefits of modern saftey and production advancements. From the fiberglass composite shell to the EPS-lined chin bar, we left no detail unpolished. The solid colors use the original style terrycloth liner, which is removable and washable.

 ALL-TERRAIN EXPLORER

From the roughest singletrack to urban blacktop, the MX-9 Adventure Mips gets you there safely in style. We've taken our MX-9 and added even more capability with an integrated anti-fog, anti-scratch Transitions faceshield. The shield flips up and leaves enough room for goggles in extreme conditions, or it can be removed completely. Conversely, the adjustable visor can be removed for a stealth street look. Mips protection, Velocity Flow ventilation, and a removable, washable, anti-microbial liner round out a highly adaptable package. Photochromic Shield Included.

SPECS

IMPACT MANAGEMENT
MIPS®

SHIELD TYPE
TRANSITIONS ADAPTIVE CLICKRELEASE SHIELD INCLUDED

VISOR
TWO-POINT ADJUSTABLE VISOR WITH AIR-INTAKE VENTS

VENTILATION
VELOCITY FLOW VENTILATION SYSTEM FOR MAXIMUM COOLING

FIT SYSTEM
3 SHELL AND EPS SIZES FOR A PERSONALIZED FIT

PRODUCT WEIGHT
1698G +/- 50G (SIZE M)

CERTIFICATION
DOT (US)
ECE (EU)

ANTI-FOG COATING
NUTRAFOG II ANTI-FOG, ANTI-SCRATCH AND UV PROTECTION

MOTO 3. NOT RETRO. ORIGINAL.

The iconic legend has returned! When the original Moto-3 was created back in the late 70s it was a product ahead of its time. Quickly becoming the industry standard in performance and style, today's Moto-3 is everything it was style-wise, with the added benefits of modern saftey and production advancements. From the fiberglass composite shell to the EPS-lined chin bar, we left no detail unpolished. The solid colors use the original style terrycloth liner, which is removable and washable.

MODERN CLASSIC

The Bullitt is an iconic product, a helmet rooted in a storied past mixed with a style and design that could best be described as "retro-future." Inspired by the legendary Bell Star helmets of the '60s and '70s but speaking a modern design language, the Bullitt became an instant classic the moment it hit the streets. We use only the highest-quality ingredients, right down to the last stitch of its genuine leather interior, to create this functional work of art. Available in fiberglass composite and featuring many shield options to further customize this one-of-a-kind helmet. No matter what, how, or where you ride, the Bullitt is in a class by itself. Includes Clear faceshield.

MODERN CLASSIC

The Bullitt is an iconic product, a helmet rooted in a storied past mixed with a style and design that could best be described as "retro-future." Inspired by the legendary Bell Star helmets of the '60s and '70s but speaking a modern design language, the Bullitt became an instant classic the moment it hit the streets. We use only the highest-quality ingredients, right down to the last stitch of its genuine leather interior, to create this functional work of art. Available in fiberglass composite and featuring many shield options to further customize this one-of-a-kind helmet. No matter what, how, or where you ride, the Bullitt is in a class by itself. Includes Clear faceshield.

 NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Versatile all-season jacket for adventure riding

Adventure will take you wherever it may, but you still want to feel in control, even on unknown roads and through uncharted terrains. That’s why your motorcycle jacket should be a versatile companion – making your every mile safe, comfortable, and composed. So, if you’re looking for an all-season all-rounder, the Offtrack 2 H2O’s for you. Now you’re dressed to be in control of every adventure. Versatile line-up Confidence-inspiring design puts the focus on your unfolding adventure. When it’s hot out in the wild, well-proportioned VCS|Aquadefence panels increase airflow, while zippers on the forearms and back ventilate your upper body. Should the temperature drop, just zip the detachable thermal liner into the PWR|Shell, PWR|Ripstop outer. And in adverse weather, switch to the hydratex liner to stay dry. The thermal liner & removable waterproof liner are both separate wearable stand-alone jackets. The waterproof liner is also wearable over the top of the outer shell jacket, making the 100% waterproof WL the outermost layer for extreme wet weather conditions. One jacket, three modes; all the versatility. Explore safe Knowing your jacket is keeping you safe helps you enjoy the thrill of adventure riding – that’s the thinking behind the Offtrack H2O jacket. It’s also why it’s equipped with SEEFLEX CE-rated protection at the shoulders and elbows, plus the option of SEESOFT protectors for your back and chest.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

 NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Multi-season, softshell pants with hydratex waterproof liner.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Versatile all-season pants for adventure riding.

You might be venturing into the unknown, but one thing’s for sure – you’ll need the right pants. And the Offtrack 2 H20 pants give you all-round comfort, wherever adventure takes you. Lightweight and versatile like their matching jacket, the zip-in thermal and waterproof liners equip you for unpredictable conditions, while SEEFLEX and SEESOFT CE-rated armor protects your knees and hips. Ready, steady, H2O VCS|Aquadefence gives you ventilation on demand. Open the panels for airflow or snap them shut using FidLock® magnetic fasteners combining locking strength with easy, one-handed operation. When closed, a clever rain gutter repels every drop of water. Plus, for full-body coverage on the longest and wettest of rides, short and long zippers will attach to any compatible REV’IT! Jacket – the obvious option being the Jacket Outback 2 H2O for the complete Outback look. Materials in the mix Different day, same pants – all thanks to ingenious textiles. The outer shell is form-fitting, long-lasting, wax-coated, 600-denier polyester, cowhide guards your inner-knee contact points, and stretch panels accommodate your different riding positions. Two cargo pockets on the upper legs provide ample capacity with easy access, while reflective elements add eye-catching details to the front, sides, and rear.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Skateboard scene-inspired, suede sneakers with SEESOFT protection

At the intersection where motorcycle riders and skateboarders meet, all the signs point to the Kick. The harmonious design of these motorcycle sneakers incorporates innovations in performance from both worlds to construct these highly capable high-tops. With features like the squared-off soles for edge-to-edge grip and the inconspicuous reinforcement for impact resistance shoes could be right up your street.

Different strokes
As anyone who’s ever been a rider or a skater would concur – and speak from experience – things often don’t go to plan. If it all kicks off, the SEESOFT ankle disc protection that’s built into these shoes steps in, with its injected ankle disc armor safeguarding your high-risk zones – it ups the impact resistance without compromising your comfort due to its contouring curves.

Back to the future
Design is about understanding the challenges we face and then engineering solutions. With all eyes on the future, REV’IT! is committed to developing products that minimize our carbon footprint and preserve our planet’s precious resources. So, the hybrid foam footbed comprises 20% recycled materials, yet it offers the exact same rebound and damping performance as previous designs. It’s also good to know we’ve used a polyurethane alternative on the upper, while the suede is oiled and waxed for long-lasting durability

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Skateboard scene-inspired, suede sneakers with SEESOFT protection

At the intersection where motorcycle riders and skateboarders meet, all the signs point to the Kick. The harmonious design of these motorcycle sneakers incorporates innovations in performance from both worlds to construct these highly capable high-tops. With features like the squared-off soles for edge-to-edge grip and the inconspicuous reinforcement for impact resistance shoes could be right up your street.

Different strokes
As anyone who’s ever been a rider or a skater would concur – and speak from experience – things often don’t go to plan. If it all kicks off, the SEESOFT ankle disc protection that’s built into these shoes steps in, with its injected ankle disc armor safeguarding your high-risk zones – it ups the impact resistance without compromising your comfort due to its contouring curves.

Back to the future
Design is about understanding the challenges we face and then engineering solutions. With all eyes on the future, REV’IT! is committed to developing products that minimize our carbon footprint and preserve our planet’s precious resources. So, the hybrid foam footbed comprises 20% recycled materials, yet it offers the exact same rebound and damping performance as previous designs. It’s also good to know we’ve used a polyurethane alternative on the upper, while the suede is oiled and waxed for long-lasting durability

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

GORE-TEX sports sneakers that mix casual style with serious performance.

Suede leather that’s been oiled and waxed adorn the outer of the Krait GTX. But be careful not to take this casual look and care-free appearance on face value. First off, there’s GORE-TEX waterproofing that shrugs off wet weather. Then alongside the suede, PWR|Mesh is busy optimizing airflow. And TPU overlays shield your foot at the lace. Suddenly, laid-back starts to look quite sporty and sophisticated. Sneaky performers The sneaker-like design might not scream motorcycle-ready. Fact is that these mid-cut boots subtly get on with performing every single day. They’re ready to ride anytime with the 100% waterproof yet remarkably breathable GORE-TEX membrane that will keep you dry while letting your feet breathe. Rain or shine, warm or cold – the Krait GTX is poised, never phased. Effortless all-rounder With understated looks, there’s all-day comfort. These boots feel great from the moment you put them on. And they inspire confidence – with reinforced high-risk zones at the toes and heels. Plus, there are practical touches – pull tabs make wearing them as easy as their style. So, without even looking like you’re even trying, you’ve got performance, protection, and practicality in one casual package.

COMFORT FEATURES
Closure:
Laces
Lining:
3D mesh
Features:
Extra pair of laces in different color
Gusseted tongue construction
Ortholite insole X40 hybrid

CLIMATE FEATURES
Waterproofing:
GORE-TEX membrane Vision 3L

PROTECTION FEATURES
Protection:
Reinforced heel
Reinforced toe
SEESOFT ankle discs
Outer shell material:
Oiled and waxed suede
PWR|Mesh
Seamless TPU film

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

GORE-TEX sports shoes that combining casual style with serious performance.

 The first thing you’ll notice is suede leather – oiled, waxed, and wrapping the toe, heel, and ankle of the Krait GTX Ladies shoes. But don’t be taken in by the care-free looks. First, there’s GORE-TEX waterproofing for poised protection from wet weather, alongside the suede, PWR|Mesh busy optimizing airflow. And the TPU overlay is shielding your foot at the laces. Suddenly, laid-back starts to look seriously sporty and sophisticated.

Contrasting stories
The sneaker-like design might not scream motorcycle-ready. Fact is that these mid-cut beauties subtly get on with performing every single day. They’re ready to ride anytime with the 100% waterproof yet remarkably breathable GORE-TEX membrane that will keep you dry while letting your feet breathe. Rain or shine, warm or cold – Krait GTX is poised, never phased.

Don’t try too hard
Wearing the Krait GTX Ladies, you don’t need to try too hard. Along with understated style, there’s all-day comfort and effective performance, plus many practical touches. Like the reinforced higher-risk zones at the toes and heels, and the CE-rated SEESOFT ankle disc. Or the pull tab that makes putting these shoes on as easy as their style – you’ve got effortless performance, protection, and practicality in one casual package

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Waterproof, mid-cut boots with PWR|Mesh for multi-season riding

Breccia GTX boots are a blend of motorcycle-specific performance and outdoor styling. Our blueprint is the array of REV’IT! footwear we’ve designed for sportive and adventure touring. You can feel that expertise in every rugged inch of the Breccia GTX boots. And you can experience it in the moments when GORE-TEX Performance Comfort laminate keeps you dry, the PWR|Mesh cools your feet, TPU resists scuffs, and CE-rated SEESOFT ankle disc keeps you safe.

Close comfort
Look closely and you’ll notice these boots employ the BOA® Fit System with M4 dial at the laces. You simply turn the dial for micro-adjustment – push in to engage, twist to tighten, and pull for fast release. So, even when it’s wet and cold, with your gloves on, you can still dial up or down to your preferred fit in a few ticks. Their durability means year after year, you twist again like you did last summer.

Walking the walk
These boots were made for riding… and walking… and climbing up a hill to watch the sun go down – get the picture? OrthoLite® insoles cushion your every step. The chunky outsole creates more stability with its wide footprint combined with an EVA foam midsole, Breccia GTX boots guarantee grip and traction when and where you need it most – both on the motorcycle and when you venture off road by foot.

COMFORT FEATURES
Closure:
Boa® M4 Platform
Lining:
3D mesh
Features:
Gusseted tongue construction
Ortholite® insole Eco-LT Hybrid
Rubber gear shift pad

CLIMATE FEATURES
Waterproofing:
GORE-TEX membrane Vision 3L

PROTECTION FEATURES
Protection:
Reinforced heel
Reinforced toe
SEESOFT ankle discs
Outer shell material:
Artificial Leather
PWR|Mesh
Seamless TPU film

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada

All-season jacket with PWR|Shell and Cordura®

Applying a modern twist to the enduring Denver design – the inspiration to make this jacket as iconic as the original. A four-pocket look might be ubiquitous, but we’ve made it unique: aesthetic detailing, a host of safety features, and a high-performance technical spec that sets REV’IT! apparel apart from the crowd.

Rethinking storage With so many pocket designs to choose from, it would have been all too easy to stray from the classic look. Instead, we played with position and convenience. Like gusseting the right upper stash pocket on a 20-degree slant for even easier access while you ride. On the left, a zipped Napoleon pocket provides sleek, secure storage, and all Denver’s pocket inners and zips are waterproof.

Refining protection PWR|Shell and CORDURA® Ripstop textiles join forces to boost abrasion resistance at the shoulders and arms. This all-season jacket has your back – there’s all the high-spec REV’IT! protection you’d expect: SEESMART CE-rated shoulder and elbow pads, and an insert for an optional SEESOFT back protector.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada

All-season jacket with PWR|Shell and Cordura®

Applying a modern twist to the enduring Denver design – the inspiration to make this jacket as iconic as the original. A four-pocket look might be ubiquitous, but we’ve made it unique: aesthetic detailing, a host of safety features, and a high-performance technical spec that sets REV’IT! apparel apart from the crowd.

Rethinking storage With so many pocket designs to choose from, it would have been all too easy to stray from the classic look. Instead, we played with position and convenience. Like gusseting the right upper stash pocket on a 20-degree slant for even easier access while you ride. On the left, a zipped Napoleon pocket provides sleek, secure storage, and all Denver’s pocket inners and zips are waterproof.

Refining protection PWR|Shell and CORDURA® Ripstop textiles join forces to boost abrasion resistance at the shoulders and arms. This all-season jacket has your back – there’s all the high-spec REV’IT! protection you’d expect: SEESMART CE-rated shoulder and elbow pads, and an insert for an optional SEESOFT back protector.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: A $75 handling fee is applied to shipping cost due to this item being oversize/overweight.

The Spooled Rear Stand lifts spool-equipped bikes. It is width adjustable to fit virtually all spool-equipped sportbikes. The Pit Bull rear motorcycle stand was designed as a modular platform which allows SS, Standard, 999, and GP top supports to be used interchangeably. Sold complete with top supports. Spools sold separately.  

NOTE: Use a Fully Adjustable Spooled Rear for a 2nd gen Busa as well as Ninja 1000 or ZX14R models with stock fender as that stand will clear the low hanging rear fender on these bikes. If you have a fender eliminator installed on those bikes, you may use this motorcycle stand on any of those bikes.

As of November 2022, all of our rear stands come standard with the 16" removable handle.  

If you're not sure which stand is right for your bike, check out our bike specific navigation, view all motorcycle stands or simply contact us and ask!  Pit Bull stands are known for our distinctive gold and red finish and are not available in other colors.

FITTING NOTES:

Handle Length: Fixed handle: 12", Removable handle: 16"
Width Adjustability: 10.5"-14.75", (Narrow/Vintage Version: 8"-11.25")
Height from ground, supports: 13-1/8"

NOTE: Stand will not work on '15+ Versys 650 or Vulcan S models with stock fender. Use the F0043-000, Forward Handle Spooled Rear in this case.

Instructions can be found here.

Can't decide between tan and black? No problem! Get the best of both worlds with the black & tan tinted Knox Maska for Biltwell Gringo and Gringo S helmets.

THE DEPICTED HELMET IS NOT INCLUDED.

The visor is constructed from high-strength polycarbonate, which is coated with anti-fog and anti-scratch coatings. Its precise fitment on the helmet protects the rider from road debris and enhances the overall sound insulation. The Maska's design allows the rider to easily change the visor based on the riding conditions within seconds. 

The elastic strap is crafted from synthetic leather, which offers a premium feel but most importantly increased durability. The rider can match the visor with a variety of different straps based on his/her personal preferences. The strap's universal design makes it compatible with all of the Maska visors.

Technical Specs:

The SeventyFive is a tribute to the stylish icon of the 70’S. The helmet is a play on the design of the Racer model and the name comes from the year when the company was born. The helmet has slotted air vents to increase ventilation and it has 3 snaps to allow for fitment of DMD's snap-on visor. It has a space large enough to accommodate most goggles. This model is also compatible with DMD's new SeventyFive Goggle  and with the DMD Ghost goggles.

The Oro Collection takes the SeventyFive line up and kicks it up a few notches incorporating a carbon kevlar shell, Italian leather trim and an inner lining made of leather and Shalimar. It is the result of the perfect union of the best Italian leather and DMD craftsmen’s skilled hands.

TECHNICAL DETAILS

• Carbon kevlar shell
• Italian leather trim
• Inner lining made of leather and Shalimar, removable and washable.
• Padded chin strap with Double D-ring closure
• ECE Homologation
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing then permit to air dry whenever possible to prevent heat damage.

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its plush inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet fashionable and stylish with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then permit to air dry whenever possible to prevent heat damage.

The G601 Heated Motorcycle Gloves are Keis' best-selling motorcycle touring glove.

These heated motorcycle gloves feature 3M Thinsulate™ insulation, are designed specifically for motorcycling in cold weather, and are fully certified LEVEL 2 to the new EU PPE Regulation 13594:2015.

These motorcycle gloves would suit the rider who enjoys riding throughout the cold WINTER months

The Keis G601 Heated Motorcycle Gloves have been specially designed to offer exceptional feel of the controls and dexterity, but with the added benefit of a micro carbon fibre heating panel across the back of the hands and over the top of the fingers. These gloves feature a thicker layer of 3M Thinsulate to offer improved warmth distribution throughout the glove, especially across the back of the hand and the fingers, together with hardened knuckle protection.

Features:

• Independent, integral heat controller, positioned on the back of the wrist for easy operation when riding - whether you prefer to wear your gloves under or over your jacket sleeve cuffs.
• Flexible hard armour across the knuckles, deliver the perfect balance between strong protection and all-day touring comfort
• NEW Scaphoid guard, for maximum protection to the palm
• Visor Wipe positioned on the left index finger.
• 3M Thinsulate™ and Hipora™ waterproof membrane for premium water and wind protection
• Conforms to the latest European PPE Directive EN 13594:2015, so you can be confident in their protective qualities. Please note: All personal protective equipment in Europe must clearly show whether they comply with the current PPE regulation via a label. A label showing 'CE approval' does not mean they are certified.  
• The G601 gloves also feature a glove battery pocket built into the glove cuff. This provides the feature of being able to power the gloves via the optional portable glove batteries (one in each glove cuff battery pocket). See Keis Lithium Batteries for details.
• Current Draw 1.6A. Typical Power 19.2W.
• Available in sizes  5 (XXXS), 6 (XXS), 7 (XS), 8 (S), 9 (M), 10 (L), 11 (XL), 12 (XXL), 13 (XXXL).

Options for powering the G601 Heated Motorcycle Gloves:

1) Power these heated motorcycle gloves from the motorcycle or via a glove battery

• Using the latest technology in heat generation, the G601 gloves can be powered from a 12V vehicle battery (cables supplied), one of the optional Battery Packs, or the specially designed Glove Batteries that fit into the cuff pocket of each glove.

a) Powering your heated gloves from a motorcycle power lead: 

• Click here to view video.

b) Powering your heated gloves from an optional single Portable Battery Pack

• Click here to view video.

c) Powering your heated gloves from the optional Keis Glove Battery Set

• Click here to view video.

2) Powering your heated gloves from a Keis heated vest, or heated Bodywarmer

• This can be achieved using the Y-lead that comes with the gloves. Alternatively, you can also purchase the 'Glove to Vest/Bodywarmer Power Lead set' which is sold separately here.
• Click here to view video.

3) Powering your Keis Heated Motorcycle Gloves from a Keis Heated Jacket.

• Note: You may need a connection adaptor if you are wishing to connect a pre-2020 garment to a post-2020 garment.
• Click here to view video.

How to Determine which size you'll need:

Example: if the widest part of your dominant hand, when measured around the hand and excluding the thumb, equals 9 inches, you would be glove size 9 - M. 

Note: Keis recommend that you purchase one size larger than your measured glove size, for best comfort, especially if you're in between sizes. E.g. if your measurement is just over 9", rather than choosing glove size 9 - M, choose glove size 10 - L for best comfort.

- Glove size 5 - XXXS
- Glove size 6 - XXS
- Glove size 7 - XS
- Glove size 8 - S
- Glove size 9 - M
- Glove size 10 - L
- Glove size 11 - XL
- Glove size 12 - XXL
- Glove size 13 - XXXL

Included with these motorcycle gloves are: 

• G601 Premium Heated Armoured Gloves
• Glove Y Lead
• Motorcycle Connection Lead
• Instructions
• The G601 heated motorcycle gloves feature the 'Male Power Plug' to connect to your chosen power source. What does the 'Male Power Plug' look like on these gloves? See image below.

See here for the 2021 Keis Apparel Heated Clothing Instructions Manual

To watch a video on how to connect a Keis heated garment to your motorcycle click here.

Cleaning guidelines:

• Our recommended method for cleaning both our leather and fabric outer gloves is to wipe the outside of the gloves with a cloth moistened with a solution prepared from S100 Technical Fabric and Leather Wash.
• Repeat, rinsing and wringing out the cloth regularly in clean solution until the gloves appear clean.
• Wipe over with a cloth moistened in plain water and allow to dry thoroughly at room temperature.
• Finally apply S100 reproofing Spray for Fabric and Leather.  We do not recommend immersion in water or washing in a washing machine.

MC PART ID: MSM033

The SeventyFive is a tribute to the stylish icon of the 70’S. The helmet is a play on the design of the Racer model and the name comes from the year when the company was born. The helmet has slotted air vents to increase ventilation and it has 3 snaps to allow for fitment of DMD's snap-on visor. It has a space large enough to accommodate most goggles. This model is also compatible with DMD's new SeventyFive Goggle  and with the DMD Ghost goggles.

TECHNICAL DETAILS

• Carbon kevlar shell
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing then permit to air dry whenever possible to prevent heat damage.

The TCX Drifter Waterproof Boots are protective and flexible, well-rounded adventure touring boots designed to handle everything your ADV bike was born to do. The integrity of the leather upper is formative enough to flex for walking and shifting comfort, but formidable enough to meet the demands of the trail. With malleolus inserts, calf and shift reinforcements, aluminum buckles and polyurethane shin plates, the waterproof-lined TCX Drifter Boots are prepared for off-road adventure. The lug sole achieves grip in any terrain, wet or dry, so your footing will never falter in the TCX Drifter WP Boots.

Grain leather upper with pull-up finishing; microfibre front and rear padded area. Rear reflex insert. Ergonomic stretch upper collar to keep outside dirt and debris

Details:

• UPPER: Full- Grain leather upper with pull-up finishing; microfibre front and rear padded area. Rear reflex insert. Ergonomic stretch upper collar to keep dirt and debris on the outside where it belongs
• LINING: T-DRY waterproof membrane
• REINFORCEMENTS: Ergonomic polyurethane shin plate and malleolus, reinforced toe and heel; leather shift pad
• CLOSURE: 3 adjustable aluminium ALU6060 buckles, ergonomic design
• FOOTBED: OrthoLite® footbed with long term cushioning and high level of breathability
• SOLE: Rubber outsole with deep lugs to offer a superior traction on any terrain. "Ideal" stitching construction technique

The Finer Details:

• The "Ideal" construction technique is a craft-based construction process that guarantees comfort, hard-wearing resistance and flexibility for footwear thanks to a totally traditional production process. The leather upper, prepared with the outer edges bonded and pressed onto a dedicated midsole, is stitched vertically. The yarn is dipped in a purpose-designed boiler full of melted tar to ensure total waterproofness. The result is top quality, durable footwear.
• OrthLite Footbed: Long-term cushioning:
• OrthoLite® foam compresses less than 5% of its thickness over the lifetime of the footbed, so the cushioning, fit, comfort and performance never change.
• High level breathability: the open-cells of the OrthoLite® foam allow air to circulate in and around the footbed, moving moisture away and keeping feet cooler and drier.

MC PART ID: MTE182

This DMD Waxed Cotton Vest is an authentic Vintage look garment, essential for any motorcycle enthusiast. This short model is full of details like cross pockets for easy rider access. Wear it over a hoody, shirt or jacket.

 Features

• Made of waxed cotton, water repellent and windproof
• Color: Olive Green
• Frontal zip closure
• Cross zip closure pockets for easy access
• Zip closure vest pocket
• Vintage design inner lining
• Specialist dry clean only
• MADE IN ITALY

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Stay casual while you ride with the Parabolica stretch jacket.

For many urban riders, comfort of moto gear ranks pretty highly on the requirements list. Something that allows for freedom of movement, looks great and has a good vibe to it. Well, that sums up the Parabolica motorcycle jacket nicely.

It comes with a clean yet angularly cut construction, handy front pockets, and a fixed hood (complete with a snap button to hold it down when riding). Furthermore, its stretch characteristics give you that flexibility you need in a sport bike fit garment.

Feel good – and look good - out on the road on any of your city rides with the Parabolica motorcycle jacket

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

PREMIUM TECH FOR YOUR SHOEI HELMET

Communication by SENA, protection by SHOEI, and SOUND BY Harman Kardon. The SRL-EXT was custom designed for one of SHOEI’s most beloved helmets, the RF-1400. The compact SRL-EXT offers both Mesh and Bluetooth intercom plus smartphone connectivity for music, GPS, phone calls, and more. SRL-EXT users will experience premium SOUND BY Harman Kardon audio inside of their SHOEI RF-1400. The SRL-EXT offers premium features including:

• SOUND BY Harman Kardon speakers and mic
• Designed specifically to fit the SHOEI RF-1400
• Bluetooth 5
• Mesh Intercom™
• 4-way Bluetooth® Intercom
• Digital Assistant Access
• Advanced Noise Control™

This is the RIALTO - we really spent alot of time on this one

Custom Rear Fender for the Triumph Bobber 

Made out of Steel and finished in Gloss Black - Bolt On including the two struts (fender stays) as pictured - with all the OEM fixing positions including chain guard 

MC PART ID: MTE189

Meet the RIVALE, the latest addition to the DMD family. With such an essential design it’s easy to forget there’s real innovation and technology within. Thanks to the new tri compound fiber, DMD have achieved a super compact helmet with all the modern security standards and a comfortable fit. A full-face helmet that recalls the roaring years of Motorsport. Made in Italy, with passion.

TECHNICAL DETAILS

• Full-face helmet made of tri compound fiber (carbon-kevlar-fibreglass)
  
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation
• PIN visor closure
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then leave to air dry.

• Exclusive Cordura Cotton Outer 12oz With Water Repellent Finish
• 3-IN-1 Interchangeable WP and Thermal Liners
• High-Quality YKK® Zippers Used Throughout
• D3O® LP1 Shoulder And Elbow Protectors Pre-Fitted
• D3O® Viper Stealth Back Protector Pre-Fitted
• D3O® Chest Protectors Pre-Fitted
• CE EN17092 Level ‘AA'
• Two Large Front Cargo Waterproof Pockets
• One Large Rear Cargo Pocket
• Outer Bicep Stash Pocket
• Internal Storage Pockets
• Merlin-Branded Snap Studs
• Bicep, Forearm, Cuff, Waist And Hem Adjustment Points
• Large Mesh Panels For Improved Breathability
• Jacket-To-Jean Connecting Zipper (Short And Long Options)
• Sculpted Front Hem
• Zipped Hem Opening
• Euro Hoop Connecting Strap

Merlin Edale Cotec Jacket
Joining the ‘Tech Wax’ Heritage Collection, the Edale waxed cotton motorcycle jacket is a great option for riders looking for a retro-styled wax jacket that will see them through the winter. Constructed from 8oz Cotec, this Halley Stevensons-Merlin collaboration fabric is exclusive to us, and is stronger, lighter and more breathable than traditional waxed cotton. Edale makes use of Outlast temperature regulating technology within the thermal liner, which can be zipped out if necessary. It’s the details that count – brass-finished Merlin-branded press studs and quality YKK zippers adorn the outside of the jacket, and the inner lining features colour-matched Marton Mills tartan. Available in sizes S-4XL.

Materials

Exclusive Halley Stevensons® Collaborative Technical Wax Fabric - Cotec®
Reissa® Active Waterproof and Breathable Membrane
Outlast®'s Award Winning Temperature Regulating Liner (Removable)
Fixed cotton Lining
British Marton Mills® Tartan Liner Trim
YKK® Zippers Used Throughout
Antique Hardware

Protection

D3O® Tri-vented LP1 CE EN1621 Level 1 Shoulder and Elbow Armour Pre-fitted (Removable)
D3O® Viper Large Back Armour Pocket
CE EN17092 AA

Pockets

Four Patch Pockets Closed By Flap and Stud
Inside Facing Jet Pocket
Off Set Rear Glove Storage Pocket
Internal Pockets

Features

Ventilation Front and Back
Side Entry Hand Warmer Pockets
Draw Cord Waist Adjustment
Adjustable Collar
Short YKK® Jacket To Trouser Connecting Zip
Euro Jacket To Jean Connector Hoop

Caring for your Edale Cotec jacket

To care for your jacket, begin by lightly brushing off any dirt or soil, and use a cold damp cloth if necessary to wipe down the jacket. Clean it in this way regularly to maintain its appearance, but don’t be too harsh as the wax will be removed. You can re-wax the jacket with our Merlin Wax Cotton Tin when it loses its waxed finish and water begins to soak into the cotton rather than bead off. Please do not machine wash, tumble dry or use hot water on your jacket. Full care information can be found in our dedicated care guide: Merlin Wash & Care.

Merlin Perton Cotec Jacket

Part of the Merlin Tech Wax Heritage line-up, Perton offers an alternative to riders who want the wax cotton look without the waxy feel. It’s constructed from Cotec, which is a Merlin-exclusive fabric developed in collaboration with Halley Stevensons. It provides the look and protection of wax cotton minus the waxy handle, but is also lighter and more breathable for better performance in warmer climates. Perton also features a Reissa waterproof membrane and a thermal lining with Outlast temperature-regulating technology. D3O® tri-vented armour sits at the shoulders and elbows, and there’s a pocket for an optional D3O® Viper back protector if required.

Materials

Exclusive Halley Stevensons® Collaborative Technical Wax Fabric - Cotec®
Reissa® Active Waterproof and Breathable Membrane
Outlast®'s Award Winning Temperature Regulating Liner (Removable)
Fixed cotton Lining
British Marton Mills® Tartan Liner Trim
YKK® Zippers Used Throughout
Antique Hardware

Protection

D3O® Tri-vented LP1 CE EN1621 Level 1 Shoulder and Elbow Armour Pre-fitted (Removable)
D3O® Viper Large Back Armour Pocket
CE EN17092 AA

Pockets

Two Chest Pockets Closed By Flap and Stud
Two Side Pockets With Zips
Inside Facing Jet Pocket
Internal Pockets

Features

Ventilation Front and Back
Adjustable Collar
Short YKK® Jacket To Trouser Connecting Zip
Euro Jacket To Jean Connector Hoop

Caring for your Perton Cotec jacket

To care for your jacket, begin by lightly brushing off any dirt or soil, and use a cold damp cloth if necessary to wipe down the jacket. Clean it in this way regularly to maintain its appearance, but don’t be too harsh as the wax will be removed. You can re-wax the jacket with our Merlin Wax Cotton Tin when it loses its waxed finish and water begins to soak into the cotton rather than bead off. Please do not machine wash, tumble dry or use hot water on your jacket. Full care information can be found in our dedicated care guide: Merlin Wash & Care.

Merlin Sherpa Riding Jacket

Everyone wants to look good both on and off the bike – and that’s exactly what our Leisure Moto Collection is designed for. The newest addition, the Sherpa jacket, combines the best of high-street fashion with protective motorcycle clothing. Sherpa offers unrivalled protection through a 220gsm Kevlar® lining, D3O®’s flexible Ghost shoulder and elbow armour and a pocket for a Viper Stealth back protector.

Materials

12.5oz Active Stretch Denim Cotton
220gsm DuPont™ Kevlar® Shoulder and Elbow Reinforcement
Black Sherpa Lining In Torso and Collar
Fixed Mesh Lining In Sleeves

Protection

D3O® Ghost Shoulder and Elbow Protectors Pre-Fitted
D3O® Viper Back Protector Pocket
CE EN17092 Level ‘AA’

Pockets

YKK® Zipped Side Entry Pockets
Front Chest Pockets With Merlin Branded Snap Studs

Features

Snap Down Collar
Expanding Rear Shoulder Panels For Improved Riding Comfort
Snap Down Collar
Adjustable Hem
Jacket-To-Jean Connecting Zipper
Euro Hoop Connecting Strap

Caring for your Sherpa jacket
To care for your jacket, remove all armour from the shoulders, elbows and back and also any removable inner liners. Use a lint-free brush or cloth to really get into any especially dirty areas, then hand-wash the jacket with a mild or diluted detergent in lukewarm water. Full care information can be found in the dedicated care guide here: Merlin Wash & Care.

Merlin Yuri Down Jacket
Introducing a new line for Merlin, the Yuri jacket acts as the perfect, packable mid-layer. Constructed from a mini-ripstop nylon outer with a durable water repellent outer treatment, Yuri can be worn both under a bike jacket as an additional thermal lining or on its own. Its mid-length cut ensures it sits perfectly underneath a protective motorcycle jacket, while elastic cuffs and a shorter collar make sure the insulated layer stays in place while riding.

Materials

Mini ripstop nylon outer shell
Durable water repellent treatment
White duck fill (90/10 down-feather ratio)
650 power fill warmth retention
Nylon 20D plain weave lining
Nylon elastic cuffs

Pockets

Two lower side entry pockets
One internal pocket
Integrated pack/storage pocket on chest
Features

Mid-layer solution which easily packs away
Shorter riding collar with Merlin-branded snap stud
Mid-length to be layered under garments
Brushed tricot soft pocket and collar linings

Merlin Sayan D3O® Laminated Jacket
As part of the growing laminate range within the Explorer Collection, Sayan arrives as a timeless classic with leather overlays to the shoulders and elbows in a classic British four-pocket style. Designed and tested with adventure in mind, this is a lightweight, durable and versatile option for those looking to go that bit further. Five-piece D3O® is pre-fitted to the garment with pockets for additional chest protectors. Sayan is available in three colour options – black, khaki or olive green.

Materials

AquaSeal+ Waterproof and Breathable Laminated Tape Seamed Outer Shell
Leather Reinforcement Panels To Shoulders and Elbows
Antibacterial Inner Mesh Lining
YKK® Waterproof Zippers
Zip Out 125gsm Thermal Lining

Protection

D3O® LP1 Shoulder And Elbow Protectors Pre-Fitted
D3O® Viper Stealth Back Protector Pre-Fitted
D3O® Chest Protector Pockets
CE EN17092 Level ‘AA’

Pockets

Two Large Chest Cargo Pockets
Two Large Lower Cargo Pockets
Large Rear Cargo Pocket
Coin/Toll Pocket To Arm
Nelson Pocket Behind Storm Flap
Patch Pocket On Removable Thermal
One Zipped And One Snap Closure Pocket On Fixed Lining

Features

Neoprene Soft Trim Collar and Cuff Edges
Brushed Collar With Snap Stud Back Fold
Chest Vents, Bicep Vents and Rear Ventilation Points
Cuff, Forearm, Bicep, Hem and Waist Size Adjustment Points
Double Layer Front Storm Flap
Merlin Branded Metal Snap Studs
Short and Long YKK® Jacket-to-Jean Connecting Zippers

Caring for your Sayan jacket

To care for your jacket, remove all armour from the shoulders, elbows and back and also any removable inner liners. Use a lint-free brush or cloth to really get into any especially dirty areas, then hand-wash the jacket with a mild or diluted detergent in lukewarm water. Full care information can be found in the dedicated care guide here: Merlin Wash & Care.

Merlin Outlaw D3O® Explorer Smock
Sustainable and stylish, the Merlin Outlaw D3O® Smock is a different take on the traditional motorcycle jacket. Making a move towards using more sustainable materials in garment construction, Outlaw is made from 100% organic Halley Stevensons® ripstop cotton with a fluorocarbon-free water-repellent finish. Backed by a highly waterproof and breathable Humax waterproof membrane, five-piece D3O® armour to the shoulders, elbows and back and a detachable draw-cord hood, Outlaw looks just as at home on the trail as it does in the city.

Materials

100% Organic Halley Stevensons® Ripstop Cotton Outer
45% Less CO2e And 50% Less Water Usage During Production
Fluorocarbon Free Water Repellent Treatment Finish
Texland Humax Waterproof And Breathable Membrane
Premium Close-Knit Mesh
YKK® Zippers Used Throughout

Protection

D3O® LP1 Shoulder And Elbow Protectors Pre-Fitted
D3O® Viper Stealth Back Protector Pre-Fitted
D3O® CP1 L1 Chest Protector Pockets
CE EN17092 Level ‘A’
Pockets

Large Multifunctional Zipped Pockets To Front Chest With Ventilation
Top And Side Loading With Zippers And Snap Closure

Features

Versatile Over-The-Head Smock/Anorak Design With Side Opening Zipper
Detachable Draw Cord Three Panel Hood
Double Fold Back Collar For Summer Riding
Jacket-To-Jean Connecting Zipper
Euro Hoop Connecting Strap

Caring for your Outlaw jacket

To care for your jacket, remove all armour from the shoulders, elbows and back and also any removable inner liners. Use a lint-free brush or cloth to really get into any especially dirty areas, then hand-wash the jacket with a mild or diluted detergent in lukewarm water.

Merlin Outlaw D3O® Explorer Smock
Sustainable and stylish, the Merlin Outlaw D3O® Smock is a different take on the traditional motorcycle jacket. Making a move towards using more sustainable materials in garment construction, Outlaw is made from 100% organic Halley Stevensons® ripstop cotton with a fluorocarbon-free water-repellent finish. Backed by a highly waterproof and breathable Humax waterproof membrane, five-piece D3O® armour to the shoulders, elbows and back and a detachable draw-cord hood, Outlaw looks just as at home on the trail as it does in the city.

Materials

100% Organic Halley Stevensons® Ripstop Cotton Outer
45% Less CO2e And 50% Less Water Usage During Production
Fluorocarbon Free Water Repellent Treatment Finish
Texland Humax Waterproof And Breathable Membrane
Premium Close-Knit Mesh
YKK® Zippers Used Throughout

Protection

D3O® LP1 Shoulder And Elbow Protectors Pre-Fitted
D3O® Viper Stealth Back Protector Pre-Fitted
D3O® CP1 L1 Chest Protector Pockets
CE EN17092 Level ‘A’
Pockets

Large Multifunctional Zipped Pockets To Front Chest With Ventilation
Top And Side Loading With Zippers And Snap Closure

Features

Versatile Over-The-Head Smock/Anorak Design With Side Opening Zipper
Detachable Draw Cord Three Panel Hood
Double Fold Back Collar For Summer Riding
Jacket-To-Jean Connecting Zipper
Euro Hoop Connecting Strap

Caring for your Outlaw jacket

To care for your jacket, remove all armour from the shoulders, elbows and back and also any removable inner liners. Use a lint-free brush or cloth to really get into any especially dirty areas, then hand-wash the jacket with a mild or diluted detergent in lukewarm water.