GIFTS OVER $200

It's not always easy to find a great vintage looking pant that is also comfortable to wear while riding your motorcycle. Inspired by the vintage racing leather pants of the 70’s, Age of Glory's DESERT PANT is the pant for your everyday adventures, both urban and off-road.

Enjoy freedom of movement and excellent protection with Kevlar fabric in critical areas and removable protectors on the knees.

The Details:

• Stretch Twill cotton 12oz
• Dupont© Kevlar fabric inside the pant on the buttocks, hips and knees
• Quilted pads on the hips
• Nubuck pads inside the legs on the knee area
• Removable knee protectors included (CE – EN1621-1)
• Zippers at the bottom of the legs, on the back
• Light quilting on lower parts of the legs
• Comfort gussets on the top of the knees and back (below the waist) areas

The long-awaited Holy Freedom riding boots have arrived! An exceptional motorcycle boot with a vintage design, the Terminator boots are CE-approved, made of leather and TPU, with a rubber outsole. Put them on and go for a little ripsky with these great-looking protective motorcycle boots. Available here in the high version for extra shin protection for any spontaneous off-road riding that might pique your interest.

Specifications

• Full grain leather upper will age beautifully
• 100% polyester lining
• EVA midsole - EVA is a foam in the midsoles that provides great shock absorption when you walk or run.
• Rubber outsole
• Waterproof
• Shaft height: 33cm
• PVC 5NO inner ankle protection
• Side technical tension strap; two position gray steel buckle with black plastic straps
• Large hook and loop strap for calf closure adjustment
• Internally reinforced toe section
• Rubber outsole with black bottom inserts provides perfect grip and high comfort
• Tab in the upper part helps with putting on the boot
• It comes with the original cotton taslan laces.
• The eyelets are made of metal with antique finish
• HolyFreedom® embossing

Introducing the Sergeant 2 Pants, highly functional riding trousers that not only look like they can take a beating, but that can perform too. The 2nd generation of Fuel's highly popular Sergeant Pants keeps the same look but with a much-improved fit. These fit much more true-to-size than the original Sergeant's. In addition, the knee armour can be adjusted up or down if needed. Quilting and suede panels give the Sergeant 2 a style of their own. This new version also comes with the FUEL 3CORE fabric, produced with leading-edge tri-core technology.

What is Fuel 3CORE Fabric?

Technology is changing and growing fast. This is why after two years of development, we developed the FUEL 3CORE fabric, to guarantee customer satisfaction and improve our products.

Fuel 3CORE fabric is produced with leading-edge tri-core technology: a new revolutionary technology resulting in a lighter fabric with significantly improved performance in both strength and comfort. The Fuel 3CORE single layer is an abrasion-resistant fabric with bi-stretch exclusively developed for our products, so you can leave the main road safer, lighter, and even more comfortable.

The Knox Maska fits Biltwell Gringo, Gringo S, and Gringo SV helmets.

THE DEPICTED HELMET IS NOT INCLUDED.

The visor is constructed from high-strength polycarbonate, which is coated with anti-fog and anti-scratch coatings. Its precise fitment on the helmet protects the rider from road debris and enhances the overall sound insulation. The Maska's design allows the rider to easily change the visor based on the riding conditions within seconds. 

The elastic strap is crafted from synthetic leather, which offers a premium feel but most importantly increased durability. The rider can match the visor with a variety of different straps based on his/her personal preferences. The strap's universal design makes it compatible with all of the Maska visors.

Technical Specs:

Goldtop's Bobber Jacket is a retro, classic 1970s style leather motorcycle jacket revived for modern-day riders. Featuring an asymmetric main zip, this double-breasted jacket provides protection through Knox's state of the art Micro-lock armour. It comes equipped with CE Level 1 armour in the shoulders and elbows and a pocket for an optional back protector. The jacket is manufactured from hand-selected, 1.4mm thick aniline cowhides which have each been hand-waxed, making each finished article unique, with a patina that ages beautifully with both time and wear. The whole jacket is finished by hand with a soft red suede trim inside the collar and cuffs, prestige quality zips throughout, and all additional metalware being made from high-quality polished Stainless Steel.

This jacket boasts a CE "AAA" level of protection, the highest most protective level it could possibly achieve. 

Available in sizes 38" to 52". Is your size not currently available on our site? No problem; we do special orders! Contact us at info@strathmoto.com and let us know what you need. Note: sizes 50 and 52 are special order and as such carry an additional $100 charge already included in the price shown as compared to standard sizes.

PRODUCT INFO

• 1.4mm Aniline cowhide leather
• CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
• Optional Knox Micro-lock Compact back protector can be purchased here
• Double-stitched diamond quilting on shoulders and lower back panel
• Traditional off-centre slanted zip
• 1 Exterior vertical breast pocket
• 2 Exterior side pockets with ball zips
• 2 Interior breast pockets
• Single adjustable Stainless Steel waist buckles 
• Industrial grade hand-polished centre zip with AERO puller
• Trademark Goldtop gold quilted lining
• Red suede leather trim in collar & cuffs

MODERN CLASSIC

The Bullitt is an iconic product, a helmet rooted in a storied past mixed with a style and design that could best be described as "retro-future." Inspired by the legendary Bell Star helmets of the '60s and '70s but speaking a modern design language, the Bullitt became an instant classic the moment it hit the streets. We use only the highest-quality ingredients, right down to the last stitch of its genuine leather interior, to create this functional work of art. Available in fiberglass composite and featuring many shield options to further customize this one-of-a-kind helmet. No matter what, how, or where you ride, the Bullitt is in a class by itself. Includes Clear faceshield.

MODERN CLASSIC

The Bullitt is an iconic product, a helmet rooted in a storied past mixed with a style and design that could best be described as "retro-future." Inspired by the legendary Bell Star helmets of the '60s and '70s but speaking a modern design language, the Bullitt became an instant classic the moment it hit the streets. We use only the highest-quality ingredients, right down to the last stitch of its genuine leather interior, to create this functional work of art. Available in fiberglass composite and featuring many shield options to further customize this one-of-a-kind helmet. No matter what, how, or where you ride, the Bullitt is in a class by itself. Includes Clear faceshield.

It's not always easy to find a great vintage looking pant that is also comfortable to wear while riding your motorcycle. Inspired by the vintage racing leather pants of the 70’s, Age of Glory's DESERT PANT is the pant for your everyday adventures, both urban and off-road.

Enjoy freedom of movement and excellent protection with Kevlar fabric in critical areas and removable protectors on the knees.

The Details:

• Stretch Twill cotton 12oz
• Dupont© Kevlar fabric inside the pant on the buttocks, hips and knees
• Quilted pads on the hips
• Nubuck pads inside the legs on the knee area
• Removable knee protectors included (CE – EN1621-1)
• Zippers at the bottom of the legs, on the back
• Light quilting on lower parts of the legs
• Comfort gussets on the top of the knees and back (below the waist) areas

MOTO 3. NOT RETRO. ORIGINAL.

The iconic legend has returned! When the original Moto-3 was created back in the late 70s it was a product ahead of its time. Quickly becoming the industry standard in performance and style, today's Moto-3 is everything it was style-wise, with the added benefits of modern saftey and production advancements. From the fiberglass composite shell to the EPS-lined chin bar, we left no detail unpolished. The solid colors use the original style terrycloth liner, which is removable and washable.

ALL-TERRAIN EXPLORER

From the roughest singletrack to urban blacktop, the MX-9 Adventure MIPS gets you there safely in style. Bell have taken their MX-9 and added even more capability with an integrated anti-fog, anti-scratch clear faceshield. The shield flips up and leaves enough room for goggles in extreme conditions, or it can be removed completely. Conversely, the adjustable visor can be removed for a stealth street look. MIPS protection, Velocity Flow ventilation, and a removable, washable, anti-microbial liner round out a highly adaptable package.

ALL-TERRAIN EXPLORER

From the roughest singletrack to urban blacktop, the MX-9 Adventure MIPS gets you there safely in style. Bell have taken their MX-9 and added even more capability with an integrated anti-fog, anti-scratch clear faceshield. The shield flips up and leaves enough room for goggles in extreme conditions, or it can be removed completely. Conversely, the adjustable visor can be removed for a stealth street look. MIPS protection, Velocity Flow ventilation, and a removable, washable, anti-microbial liner round out a highly adaptable package.

The DMD Solo Rider brown leather jacket is a classic motorbike jacket suitable for every kind of bike.

This jacket is full of details including the quilted patches applied both on the shoulders and sleeves recalling the style of jackets used in motorbike races of the 1920s.

Not only does it look fantastic, the Solo Rider is a properly protective motorcycle jacket with homologation, certified CE AA (EN 17092-3:2020), and includes certified protectors in the shoulders and elbows with an option to purchase a back protector separately. 

Protection

• Protective and homologated motorcycle jacket
• CE certification: AA (EN 17092-3: 2020)
• Predisposition for certified protectors on shoulders and elbows (protectors included).
• Lightweight, ultra-flexible and ventilated protectors
• Predisposition for back protection (special pocket) (Back protector is NOT included but can be purchased separately here)

 Features

• Made of real leather. Color: Brown
• Stand up collar with press studs closure
• Front zip and press studs closure
• 4 press studs closure front pockets
• Quilted patches applied both on shoulders and sleeves
• Zip closure vest pocket
• Zip closure and press studs closure at cuffs
• Vintage design inner lining
• Specialist dry clean only
• MADE IN ITALY

Since DMD jackets are made of genuine leather, any imperfections are not to be considered as defects, but as a peculiarity of the garment.

Model in the last image is 1.83 m wearing size L

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its plush inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet fashionable and stylish with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then permit to air dry whenever possible to prevent heat damage.

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its plush inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet fashionable and stylish with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing;  then permit to air dry whenever possible to prevent heat damage.

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its fabulous inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet fashionable and stylish with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then permit to air dry whenever possible to prevent heat damage.

Fitment note: our customers usually find these fit on the small side so you may wish to consider sizing up from what you normally wear.

Introducing the new and upgraded Fuel “Division 2” jacket. A 1950s-inspired design that combines the classic looks of yesteryear with all the benefits of modern technology.

Made using tough military canvas with a water and dirt repellent treatment, and detailed with supple suede in high-use areas. Improved pattern with longer arm length for a more comfortable fit, and a waterproof lining for riding in rainy conditions. 

Three large waterproof pockets and one waterproof document pocket. A brown corduroy collar for a greater feel and style, with a high-quality neck closure using traditional leather and brass fittings.

A zip-out black liner creates insulation during the winter but can be removed in the warmer months for optimum year-round comfort. Zipped ventilation openings on the sleeves and across the shoulder at the rear create all-important airflow on that dusty track to nowhere.

Vintage style with no compromise, supplied with smooth ways CE level 2 body armor at the elbow, shoulder, and spine. Can you hear the call of the wild? 

Tech Specs

• 100% Cotton canvas black colored outer shell
• Cow Suede Leather
• Cotton blend Polyester fabric Burgundy color inner
• 125g Thermo liner (removable)
• Waterproof membrane
• Reinforced with Kevlar in impact areas
• Includes Smoothways CE level 2 body armor at elbows, shoulders, and spine
• Waxed cotton for water resistance

Fitment note: our customers usually find these fit on the small side so you may wish to consider sizing up from what you normally wear.

Introducing the new and upgraded Fuel “Division 2” jacket. A 1950s-inspired design that combines the classic looks of yesteryear with all the benefits of modern technology.

Made using tough military canvas with a water and dirt repellent treatment, and detailed with supple suede in high-use areas. Improved pattern with longer arm length for a more comfortable fit, and a waterproof lining for riding in rainy conditions. 

Three large waterproof pockets and one waterproof document pocket. A brown corduroy collar for a greater feel and style, with a high-quality neck closure using traditional leather and brass fittings.

A zip-out black liner creates insulation during the winter but can be removed in the warmer months for optimum year-round comfort. Zipped ventilation openings on the sleeves and across the shoulder at the rear create all-important airflow on that dusty track to nowhere.

Vintage style with no compromise, supplied with smooth ways CE level 2 body armor at the elbow, shoulder, and spine. Can you hear the call of the wild? 

Tech Specs

• 100% Cotton canvas dark green colored outer shell
• Cow Suede Leather
• Cotton blend Polyester fabric Burgundy color inner
• 125g Thermo liner (removable)
• Waterproof membrane
• Reinforced with Kevlar in impact areas
• Includes Smoothways CE level 2 body armor at elbows, shoulders, and spine
• Waxed cotton for water resistance

Introducing the Sergeant 2 Pants, highly functional riding trousers that not only look like they can take a beating, but that can perform too. The 2nd generation of Fuel's highly popular Sergeant Pants keeps the same look but with a much-improved fit. These fit much more true-to-size than the original Sergeant's. In addition, the knee armour can be adjusted up or down if needed. Quilting and suede panels give the Sergeant 2 a style of their own. This new version also comes with the FUEL 3CORE fabric, produced with leading-edge tri-core technology.

What is Fuel 3CORE Fabric?

Technology is changing and growing fast. This is why after two years of development, we developed the FUEL 3CORE fabric, to guarantee customer satisfaction and improve our products.

Fuel 3CORE fabric is produced with leading-edge tri-core technology: a new revolutionary technology resulting in a lighter fabric with significantly improved performance in both strength and comfort. The Fuel 3CORE single layer is an abrasion-resistant fabric with bi-stretch exclusively developed for our products, so you can leave the main road safer, lighter, and even more comfortable.

Introducing the Sergeant 2 Pants, highly functional riding trousers that not only look like they can take a beating, but that can perform too. The 2nd generation of Fuel's highly popular Sergeant Pants keeps the same look but with a much-improved fit. These fit much more true-to-size than the original Sergeant's. In addition, the knee armour can be adjusted up or down if needed. Quilting and suede panels give the Sergeant 2 a style of their own. This new version also comes with the FUEL 3CORE fabric, produced with leading-edge tri-core technology.

What is Fuel 3CORE Fabric?

Technology is changing and growing fast. This is why after two years of development, we developed the FUEL 3CORE fabric, to guarantee customer satisfaction and improve our products.

Fuel 3CORE fabric is produced with leading-edge tri-core technology: a new revolutionary technology resulting in a lighter fabric with significantly improved performance in both strength and comfort. The Fuel 3CORE single layer is an abrasion-resistant fabric with bi-stretch exclusively developed for our products, so you can leave the main road safer, lighter, and even more comfortable.

Shopping for someone else but not sure what to give them? Give them the gift of choice with a Strath Moto gift card.

Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees. You can redeem them online by entering the code received at checkout. Alternatively, they can also be redeemed in-store - just present your gift card to us at time of purchase. Easy peasy.

Goldtop England's '76 Cafe Racer leather motorcycle jacket is quite simply, a timeless piece of café racer riding apparel! Based upon the original Goldtop 1976 Scuftuf design, this jacket features black aniline cowhide, with red suede trim throughout, and Stainless Steel buckles & poppers. This jacket has comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for a Knox back protector (optional upgrade).

Note: sizes 50 and 52 are special order and as such carry an additional $100 charge already included in the price shown as compared to standard sizes.

PRODUCT INFO

• CE "AAA" Approved Protective Garment to EN 17092:2020
• 1.4mm thickness black aniline cowhide leather
• CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
• Optional Knox Micro-lock Compact back protector can be purchased here
• Quilted panels on both the shoulders and elbows
• Industrial grade hand-polished centre zip with AERO pull
• Trademark Goldtop gold quilted lining
• 2 Zipped external pockets and
• 2 Interior chest pockets
• Adjustable cuffs with ball zips
• Stainless Steel adjustable waist buckles and collar snap
• Red suede leather trim inside collar, black suede leather trim inside cuffs and zip guard
• Dropped back

Goldtop England's '76 Cafe Racer leather motorcycle jacket is quite simply, a timeless piece of café racer riding apparel! Based upon the original Goldtop 1976 Scuftuf design, this jacket comes hand-waxed, racing green aniline cowhide, with tan suede trim throughout, and Stainless Steel buckles & poppers. This jacket has comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for an optional back protector.

Available in sizes 38" to 52", and as these are hand-waxed jackets, the colour may vary slightly from jacket to jacket! Note: sizes 50 and 52 are special order and as such carry an additional $100 charge already included in the price shown as compared to standard sizes.

PRODUCT INFO

• CE "AAA" Approved Protective Garment to EN 17092:2020
• 1.4mm thickness aniline cowhide leather
• CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
• Optional Knox Micro-lock Compact back protector can be purchased here
• Quilted panels on both the shoulders and elbows
• Industrial grade hand-polished centre zip with AERO pull
• Trademark Goldtop champagne quilted lining
• 2 Zipped external pockets and
• 2 Interior chest pockets
• Adjustable cuffs with ball zips
• Stainless Steel adjustable waist buckles and collar snap
• Suede leather trim inside collar, cuffs and zip guard
• Dropped back

Goldtop England's '76 Cafe Racer leather motorcycle jacket is quite simply, a timeless piece of café racer riding apparel! Based upon the original Goldtop 1976 Scuftuf design, this jacket now comes hand-waxed, midnight blue aniline cowhide, with tan suede trim throughout, and Stainless Steel buckles & poppers. This jacket has comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for an optional back protector. 

Available in sizes 38" to 48", and as these are hand-waxed jackets, the colour may vary slightly from jacket to jacket!

PRODUCT INFO

• CE "AAA" Approved Protective Garment to EN 17092:2020
• 1.4mm thickness aniline cowhide leather
• CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
• Optional Knox Micro-lock Compact back protector can be purchased here
• Quilted panels on both the shoulders and elbows
• Industrial grade hand-polished centre zip with AERO pull
• Trademark Goldtop red quilted lining
• 2 Zipped external pockets and
• 2 Interior chest pockets
• Adjustable cuffs with ball zips
• Stainless Steel adjustable waist buckles and collar snap
• Suede leather trim inside collar, cuffs and zip guard
• Dropped back

Goldtop England's '76 Cafe Racer leather motorcycle jacket is quite simply, a timeless piece of café racer riding apparel! Based upon the original Goldtop 1976 Scuftuf design, this jacket now comes hand-waxed, brown aniline cowhide, with brown suede trim throughout, and Stainless Steel buckles & poppers. This jacket has comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for an optional back protector. 

Available in sizes 38" to 52", and as these are hand-waxed jackets, the colour may vary slightly from jacket to jacket! Note: sizes 50 and 52 are special order and as such carry an additional $100 charge already included in the price shown as compared to standard sizes.

PRODUCT INFO

• CE "AAA" Approved Protective Garment to EN 17092:2020
• 1.4mm thickness aniline cowhide leather
• CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
• Optional Knox Micro-lock Compact back protector can be purchased here
• Quilted panels on both the shoulders and elbows
• Industrial grade hand-polished centre zip with AERO pull
• Trademark Goldtop gold quilted lining
• 2 Zipped external pockets and
• 2 Interior chest pockets
• Adjustable cuffs with ball zips
• Stainless Steel adjustable waist buckles and collar snap
• Suede leather trim inside collar, cuffs and zip guard
• Dropped back

Goldtop's Bobber Jacket is a retro, classic 1970s style leather motorcycle jacket revived for modern-day riders. Featuring an asymmetric main zip, this double-breasted jacket provides protection through Knox's state of the art Micro-lock armour. It comes equipped with CE Level 1 armour in the shoulders and elbows and a pocket for an optional back protector. The jacket is manufactured from hand-selected, 1.4mm thick aniline cowhides which have each been hand-waxed, making each finished article unique, with a patina that ages beautifully with both time and wear. The whole jacket is finished by hand with a soft tan suede trim, prestige quality zips throughout, and all additional metalware being made from high-quality polished Stainless Steel.

This jacket boasts a CE "AAA" level of protection, the highest most protective level it could possibly achieve. 

Available in sizes 38" to 48". Is your size not currently available on our site? No problem; we do special orders! Contact us at info@strathmoto.com and let us know what you need.

PRODUCT INFO

• 1.4mm Aniline cowhide leather
• CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
• Optional Knox Micro-lock Compact back protector can be purchased here
• Double-stitched diamond quilting on shoulders and lower back panel
• Traditional off-centre slanted zip
• 1 Exterior vertical breast pocket
• 2 Exterior side pockets with ball zips
• 2 Interior breast pockets
• Single adjustable Stainless Steel waist buckles 
• Industrial grade hand-polished centre zip with AERO puller
• Trademark Goldtop champagne quilted lining
• Tan suede leather trim in collar & cuffs

Goldtop's Bobber Jacket is a retro, classic 1970s style leather motorcycle jacket revived for modern-day riders. Featuring an asymmetric main zip, this double-breasted jacket provides protection through Knox's state of the art Micro-lock armour. It comes equipped with CE Level 1 armour in the shoulders and elbows and a pocket for an optional back protector. The jacket is manufactured from hand-selected, 1.4mm thick aniline cowhides which have each been hand-waxed, making each finished article unique, with a patina that ages beautifully with both time and wear. The whole jacket is finished by hand with a soft tan suede trim, prestige quality zips throughout, and all additional metalware being made from high-quality polished Stainless Steel.

This jacket boasts a CE "AAA" level of protection, the highest most protective level it could possibly achieve. 

Available in sizes 38" to 48". Is your size not currently available on our site? No problem; we do special orders! Contact us at info@strathmoto.com and let us know what you need.

PRODUCT INFO

• 1.4mm Aniline cowhide leather
• CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
• Optional Knox Micro-lock Compact back protector can be purchased here
• Double-stitched diamond quilting on shoulders and lower back panel
• Traditional off-centre slanted zip
• 1 Exterior vertical breast pocket
• 2 Exterior side pockets with ball zips
• 2 Interior breast pockets
• Single adjustable Stainless Steel waist buckles 
• Industrial grade hand-polished centre zip with AERO puller
• Trademark Goldtop quilted lining - champagne colour
• Tan suede leather trim in collar & cuffs

The Bobber Motorcycle Jacket

Goldtop's Bobber Jacket is a retro, classic 1970s style leather motorcycle jacket revived for modern-day riders. Featuring an asymmetric main zip, this double-breasted jacket provides protection through Knox's state of the art Micro-lock armour. It comes equipped with CE Level 1 armour in the shoulders and elbows and a pocket for an optional back protector. The jacket is manufactured from hand-selected, 1.4mm thick aniline cowhides which have each been hand-waxed, making each finished article unique, with a patina that ages beautifully with both time and wear. The whole jacket is finished by hand with a soft tan suede trim, prestige quality zips throughout, and all additional metalware being made from high-quality polished Stainless Steel.

This jacket boasts a CE "AAA" level of protection, the highest most protective level it could possibly achieve. 

Available in sizes 38" to 52". Is your size not currently available on our site? No problem; we do special orders! Contact us at info@strathmoto.com and let us know what you need. Note: sizes 50 and 52 are special order and as such carry an additional $100 charge already included in the price shown as compared to standard sizes.

PRODUCT INFO

• 1.4mm Aniline cowhide leather
• CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
• Optional Knox Micro-lock Compact back protector can be purchased here
• Double-stitched diamond quilting on shoulders and lower back panel
• Traditional off-centre slanted zip
• 1 Exterior vertical breast pocket
• 2 Exterior side pockets with ball zips
• 2 Interior breast pockets
• Single adjustable Stainless Steel waist buckles 
• Industrial grade hand-polished centre zip with AERO puller
• Trademark Goldtop gold quilted lining
• Brown suede leather trim inside collar, cuffs, and zip guard
• Dropped back

The long-awaited Holy Freedom riding boots have arrived! An exceptional motorcycle boot with a vintage design, the Night Hawk boots are CE-approved, made of leather and TPU, with a rubber outsole. Put them on and go for a little ripsky with these great-looking protective motorcycle boots. Available here in the standard height version.

Specifications

• Split leather upper
• 100% polyester lining
• EVA midsole - EVA is a foam in the midsoles that provides great shock absorption when you walk or run.
• Rubber outsole
• Shaft height: 25cm
• PVC 5NO inner ankle protection
• Side technical tension strap; two position gray steel buckle with black plastic straps
• Large hook and loop strap for calf closure adjustment
• Internally reinforced toe section
• Rubber outsole with black bottom inserts provides perfect grip and high comfort
• Tab in the upper part helps to put on the boot
• It comes with the original cotton taslan laces.
• The eyelets are made of metal with antique finish
• HolyFreedom® embossing
• Care: Natural leather oils and foam leather cleaner

The long-awaited Holy Freedom riding boots have arrived! An exceptional motorcycle boot with a vintage design, the Night Hawk boots are CE-approved, made of leather and TPU, with a rubber outsole. Put them on and go for a little ripsky with these great-looking protective motorcycle boots. Available here in the high version for extra shin protection for any spontaneous off-road riding that might pique your interest.

Specifications

• Split leather upper
• 100% polyester lining
• EVA midsole - EVA is a foam in the midsoles that provides great shock absorption when you walk or run.
• Rubber outsole
• Shaft height: 33cm
• Leather ages beautifully (Full grain leather)
• PVC 5NO inner ankle protection
• Side technical tension strap; two position gray steel buckle with black plastic straps
• Large hook and loop strap for calf closure adjustment
• Internally reinforced toe section
• Rubber outsole with black bottom inserts provides perfect grip and high comfort
• Tab in the upper part helps to put on the boot
• It comes with the original cotton taslan laces.
• The eyelets are made of metal with antique finish
• HolyFreedom® embossing
• Care: Natural leather oils and foam leather cleaner

Presenting the beautifully designed Holy Freedom Quattro waxed cotton jacket with leather detail, completely CE certified. It's built for life on a motorcycle, but feel free to use it how you like. The clean and timeless design combined with natural materials make it perfect for custom bikes, cafe racers and touring.

FEATURES

• Fully CE certified waxed cotton canvas protective motorcycle jacket
• Classic 4 pocket design with natural materials and waxing treatments make it perfect for custom bikes, cafe racers and touring.
• Totally waterproof
• Neck, external shoulder reinforcements, wrists and pockets flaps are in cowhide leather.
• Outer: 80% waxed canvas cotton, 20% cowhide leather (for borders and details)
• Inner lining: 60% cotton, 40% silk
• Inner sleeve lining is made of 100% silk in red colour.
• Inner lining in cotton with signature HolyFreedom® checkered pattern.
• All external patches are HolyFreedom® originals.
• It is supplied with elbow and shoulder CE AA protectors.
• It is also equipped with a pocket for the insertion of a back protector.
• All the zips supplied are YKK
• Front main zip has fabric flap inside.
• Main zip is covered by a flap with snap buttons.
• Wrist closure with zips and snaps.
• Snap buttons are of a metallic Holy Freedom® original design.
• The jacket has a total of 7 external and 3 internal pockets.
• Waist is adjustable thanks to an internal elastic regulator
• All constructions details are personally tested by the Holy Freedom® team.

• For fitting, please consult the size guide, and don’t hesitate to contact us, if you've any questions.

Presenting the beautifully designed Holy Freedom Quattro waxed cotton jacket with leather detail, completely CE certified. It's built for life on a motorcycle, but feel free to use it how you like. The clean and timeless design combined with natural materials make it perfect for custom bikes, cafe racers and touring.

FEATURES

• Fully CE certified waxed cotton canvas protective motorcycle jacket
• Classic 4 pocket design with natural materials and waxing treatments make it perfect for custom bikes, cafe racers and touring.
• Totally waterproof
• Neck, external shoulder reinforcements, wrists and pockets flaps are in cowhide leather.
• Outer: 80% waxed canvas cotton, 20% cowhide leather (for borders and details)
• Inner lining: 60% cotton, 40% silk
• Inner sleeve lining is made of 100% silk in red colour.
• Inner lining in cotton with signature HolyFreedom® checkered pattern.
• All external patches are HolyFreedom® originals.
• It is supplied with elbow and shoulder CE AA protectors.
• It is also equipped with a pocket for the insertion of a back protector.
• All the zips supplied are YKK
• Front main zip has fabric flap inside.
• Main zip is covered by a flap with snap buttons.
• Wrist closure with zips and snaps.
• Snap buttons are of a metallic Holy Freedom® original design.
• The jacket has a total of 7 external and 3 internal pockets.
• Waist is adjustable thanks to an internal elastic regulator
• All constructions details are personally tested by the Holy Freedom® team.

• For fitting, please consult the size guide, and don’t hesitate to contact us, if you've any questions.

The long-awaited Holy Freedom riding boots have arrived! An exceptional motorcycle boot with a vintage design, the Terminator boots are CE-approved, waterproof, made of leather and TPU, with a rubber outsole. Put them on and go for a little ripsky with these great-looking protective motorcycle boots.

Specifications

• Brown full grain leather upper will age beautifully with time
• 100% polyester lining
• EVA midsole - EVA is a foam in the midsoles that provides great shock absorption when you walk or run.
• Rubber outsole
• Waterproof
• Shaft height: 25cm
• PVC 5NO inner ankle protection
• Side technical tension strap; two position gray steel buckle with black plastic straps
• Large hook and loop strap for calf closure adjustment
• Internally reinforced toe section
• Rubber outsole with black bottom inserts provides perfect grip and high comfort
• Tab in the upper part helps with putting on the boot
• It comes with the original cotton taslan laces.
• The eyelets are made of metal with antique finish
• HolyFreedom® embossing
• Care: Natural leather oils and foam leather cleaner

J501 Heated Jacket

The J501 is a jacket mid-layer with Micro Carbon Fibre heated panels in the sleeves and across the chest and back alongside a heated collar. KEIS jackets include Far Infrared technology, which imitates sunshine warmth.

Sizes shown include the chest measurement in both centimeters and inches when measured around the widest part of the chest. If in between sizes, go with the larger size.

URBAN MESSENGER BAG

Virtually indestructible Nylon-6 Platform, lighter than alloy and without fatigue issues, it‘s machined with optional attachment points enabling you to set-up the bike to suit your adventure. 

• Mount a single OS-32 or OS-22 SOFT PANNIER or a single 1.75 Rotopax™ fuel or water container.

• Mount a OS-6 or OS-12 ADVENTURE PACK with single or double 1 gallon Rotopax™ fuel/water containers.

TUBE FIT - all 16 - 20mm standard hoop pannier frames including TOURATECH, HEPCO & BECKER, GIVI, KTM, RALLYRAID PRODUCTS, SHIFT MANUFACTURING & METAL MULE 

• 10mm Nylon-6 construction.
• CNC machined.
• Includes fitting kit for 16mm - 20mm hoop frames.
• Universal design, fits left or right side.

PRICED PER SINGLE PLATFORM

PLATFORM DIMENSIONS
390(w) x 300(h) x 10(d)mm
15.3"(w) x 11.8"(h) x 0.3"(d)

TOTAL WEIGHT
1200g  / 42oz

PRODUCT CODE
KOSPT-3

The OS-22 soft pannier has all the same design features as the OS-32 soft pannier except for a 40mm slimmer profile. Designed to pair up with an OS-32 for bikes with off-centre pannier frames or to be used as a pair of OS-22s if you just desire a narrow profile to your bike.

The structured box shape allows for effortless packing and load control. The 100% waterproof roll-top closure and removable white liner guarantee pack contents remain protected from the elements.

Mounting and dismounting OS-SOFT PANNIERS to the bike takes less than a minute with two quick release straps and buckles. The same straps compress the pack firmly in position. No extra tie-down straps are required.

Constructed from the highest quality materials including ultra-abrasion resistant Hypalon + 1000D Cordura®, with Kevlar® webbing and aircraft grade alloy buckles.

Offering two easy fit options, either traditional 'over the seat' saddlebag format using OS-STRAPS or as a single pannier by hooking-on to a specially designed OS-PLATFORM.
(both sold separately)

PRICED PER SINGLE PANNIER

FEATURES

The OS-22 is the base for various add-on options with 16 “hook-on” points. Choose either 6 or 12 litre OS-PACKS to mount on the top and/or front or back, to build up a bespoke luggage system to suit your type or trip length.

A reinforced handle assists carrying heavy loads off the bike. Plus an optional OS-SHOULDER STRAP can be hooked on to convert to a shoulder bag.

A security cable block provides a solid mounting point to cable-lock the pack to the bike frame to stop the opportunist thief.

Hi-Vis details front and rear add an extra safety element for low light riding.

 TECH-SPECS

• 100% waterproof liner
• Roll-top closure
• HYPALON + 1000D Cordura®
• Reinforced carry handle
• Aircraft grade alloy buckles
• KEVLAR® webbing
• Security cable block
• Hi-Vis details
• 16 hook-on points
• Shoulder strap loops

FITTING OPTIONS

The OS-22 requires pannier frames to be fitted to the bike. 
These are model specific, available as accessories from bike manufacturers or other aftermarket suppliers. 

Once fitted there are 2 options to fit the OS-22
1. Traditional ‘over the seat’ saddlebag format, using OS-STRAPS
2. Fixing a specially designed OS-PLATFORM to the frame and mounting the OS-22 to the platform.

DIMENSIONS
400(h) x 420(w) x 150(d) mm
15.7”(h) x 16.5”(w) x 5.9”(d)

WEIGHT
2600g - 91.7oz

VOLUME
22 litres (1340cu in)

PRODUCT CODE
KOS22

DOWNLOAD FITTING GUIDE .pdf HERE

Serious 'adventure' motorcycle travel demands serious adventure luggage and the New KRIEGA OVERLANDER-SYSTEM (OS) sets a new standard.

The OS-32 soft pannier is at the core of the range and shares many of the features of traditional ADV hard luggage with the added benefits of durability and safety for riding in demanding environments where there will be the inevitable scrape with the terrain.

The structured box shape allows for effortless packing and load control. The 100% waterproof roll-top closure and removable white liner guarantee pack contents remain protected from the elements.

Mounting and dismounting OS-SOFT PANNIERS to the bike takes less than a minute with two quick release straps and buckles. The same straps compress the pack firmly in position. No extra tie-down straps are required.

Constructed from the highest quality materials including ultra-abrasion resistant Hypalon™ + 1000D Cordura®, with Kevlar® webbing and aircraft grade alloy buckles.

Offering two easy fit options, either traditional 'over the seat' saddlebag format using OS-STRAPS or as a single pannier by hooking-on to a specially designed OS-PLATFORM.
(both sold separately)

PRICED PER SINGLE PANNIER

FEATURES

The OS-32 is the base for various add-on options with 16 “hook-on” points. Choose either 6 or 12 litre OS-PACKS to mount on the top and/or front or back, to build up a bespoke luggage system to suit your type or trip length.

A reinforced handle assists carrying heavy loads off the bike. Plus an optional OS-SHOULDER STRAP can be hooked on to convert to a shoulder bag.

A security cable block provides a solid mounting point to cable-lock the pack to the bike frame to stop the opportunist thief.

Hi-Vis details front and rear add an extra safety element for low light riding.

 TECH-SPECS

• 100% waterproof liner
• Roll-top closure
• HYPALON™+ 1000D Cordura®
• Reinforced carry handle
• Aircraft grade alloy buckles
• KEVLAR® webbing
• Security cable block
• Hi-Vis details
• 16 hook-on points
• Shoulder strap loops

FITTING OPTIONS

The OS-32 requires pannier frames to be fitted to the bike. 
These are model specific, available as accessories from bike manufacturers or other aftermarket suppliers. 

Once fitted there are 2 options to fit the OS-32
1. Traditional ‘over the seat’ saddlebag format, using OS-STRAPS
2. Fixing a specially designed OS-PLATFORM to the frame and mounting the OS-32 to the platform.

DIMENSIONS
400(h) x 420(w) x 190(d) mm
15.7(h) x 16.5(w) x 7.5(d) ins.

WEIGHT
2600g - 91.7oz

VOLUME
32 litres (1942 cu in)

PRODUCT CODE
KOS32

DOWNLOAD FITTING GUIDE .pdf HERE