NEW ARRIVALS

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Protective, everyday, Regular Fit jeans that echo your fashion sense.

We updated the level of stretch in the Lombard 3 RF motorcycle jeans to preserve the high level of comfort you experience when you wear them. The protection is there, but it will remain virtually unnoticed when you’re riding, regardless of your riding position.

The stretch ensures that the jeans don’t wrinkle when you get off. These features make the Lombard 3 your ideal partner on a day that you’re riding, but also when you want to look like you’re not wearing motorcycle gear off your bike.

A blue or black wash is available. Regardless of the hue, riders can’t lose! They can be worn with almost everything. The included knee protector pockets are adjustable to two different heights, in order to have your armor at the correct place regardless of your leg length.

Dress them up, or dress them down. The Lombard 3 RF motorcycle jeans are a perfect everyday pair of riding denim for the versatile urbanite.

• Outside: 100% cowhide tested leather
• Interior reinforcements: CE approved moulded Elastopan Impact material
• Lining: 100% polyester
• knuckle and finger protections in CE approved moulded Elastopan Impact material.
• very versatile glove, ideal for spring, summer and autumn temperatures.
• cowhide tested against abrasion
• index touch finger
• Velcro closure on wrist
• Lycra flap for comfort of closure at wrist
• leather gradually softens and adapts to the morphology of the hand in a few hours of use.
• Original HOLYFREEDOM® design. HolyFreedom® bestsellers!
• For the fit, carefully consult the size chart 

• Outside: 100% cowhide tested leather
• Interior reinforcements: CE approved moulded Elastopan Impact material
• Lining: 100% polyester
• knuckle and finger protections in CE approved moulded Elastopan Impact material.
• very versatile glove, ideal for spring, summer and autumn temperatures.
• cowhide tested against abrasion
• index touch finger
• Velcro closure on wrist
• Lycra flap for comfort of closure at wrist
• leather gradually softens and adapts to the morphology of the hand in a few hours of use.
• Original HOLYFREEDOM® design. HolyFreedom® bestsellers!
• For the fit, carefully consult the size chart 

Italian outfit Holy Freedom has been producing quality motorcycle tube scarfs for years and has a wide range of designs and materials to suit any occasion.

If you ride a motorcycle, there are plenty of good reasons to wear a tube scarf/neck gaiter: 

• Whether you wear a full face or open face helmet tube scarfs can make a huge difference to your level of comfort by helping to keep the cold off the neck and face.
• It can be worn in many ways such as a balaclava, neck warmer, and headband.
• Ideal for all sports: motorcycling, running, tennis, cycling, beach volleyball, skiing, snowboarding, climbing, and others.
• Constructed without any seams to offer improved comfort and the benefit of increased elasticity for a multitude of fitment styles.
• An antibacterial treatment also means they’ll stay smelling fresh for longer.

What is Primaloft?

Primaloft is a synthetic microfiber with excellent thermal insulation properties. Originally developed for the United States Army it has the combined insulating benefits of both down and wool. Primaloft is able to retain body heat in all conditions, even when it’s soaking wet.

The Holy Freedom Primaloft tube scarfs are a lighter weight alternative to the Holy Freedom Polar range.

Italian outfit Holy Freedom has been producing quality motorcycle tube scarfs for years and has a wide range of designs and materials to suit any occasion.

Thanks to the pandemic the world’s going crazy for face masks, but if you ride a motorcycle, there are plenty of other good reasons to wear a tube scarf: 

• Whether you wear a full face or open face helmet tube scarfs can make a huge difference to your level of comfort by helping to keep the cold off the neck and face.
• It can be worn in many ways such as a balaclava, neck warmer, and headband.
• Ideal for all sports: motorcycling, running, tennis, cycling, beach volleyball, skiing, snowboarding, climbing, and others.
• Constructed without any seams to offer improved comfort and the benefit of increased elasticity for a multitude of fitment styles.
• An antibacterial treatment also means they’ll stay smelling fresh for longer.
• Superior stretch
• Moisture management
• Lightweight
• Stops the wind

• 73% Cotton, 23% Polyamide, 4% Elastane
• Double tubed with ultra-fine stitching along each checker for enhanced shape retention & fit when worn over face
• 2-Way stretch across the width for perfect grip and fit
• Measure around head to gauge fit - most men will require size Large
• Made in England

• 73% Cotton, 23% Polyamide, 4% Elastane
• Double tubed with ultra-fine stitching along each checker for enhanced shape retention & fit when worn over face
• 2-Way stretch across the width for perfect grip and fit
• Measure around head to gauge fit - most men will require size Large
• Made in England

Goldtop England's Flat Tracker Jacket has us wanting to get sideways! This version of the Flat Tracker gets the Summer treatment, featuring perforated leather along the arms and chest for increased breathability in warm weather, with a seamless transition to non-perforated leather on the torso for a very sleek and dare we say, sexy-looking jacket indeed. It also features a removable inner gilet/vest allowing you to customize your climate control. A jacket for modern-day riders who appreciate a subtle nod to the more traditional designs of the 1960s and 1970s! Beautifully crafted from 1.4mm Aniline Cowhide with diamond double stitching, all hand finished with traditional ball zips, Stainless Steel fastenings, and a light tan suede collar and black suede trim inside the cuffs. This jacket comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for a Knox back protector (optional upgrade).

PRODUCT INFO

• 1.4mm thickness black aniline cowhide leather with perforated panels for better airflow in warm weather
• Trademark Goldtop gold plain lining with a removable quilted gilet
• CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
• Optional Knox Micro-lock Compact back protector can be purchased here
• Double-stitched quilting across the collar and shoulders
• Industrial grade hand-polished centre zip with AERO pull
• 4 Zipped external pockets
• 2 Interior chest pockets
• Adjustable cuffs with ball zips
• Stainless Steel adjustable waist buckles and collar snap
• Light tan suede leather trim inside collar, black suede leather trim inside cuffs and zip guard
• Dropped back

Note: the pictures of the model in the images show the version with the split-seam front. This version is with the seamless front.

MC PART ID: MFX003

MC PART ID: MRR005

MC PART ID: MMU587

Plug and Play Rear wiring Loom - this connects directly into the rear harness plug of your bike and allows you to fit after market Taillights, Indicators, Accessories etc without having to chop into the stock loom

This Loom our part code DDM016 fits:

• All Years Triumph Bobber
• All Years Speedmaster 1200
• All Years Scrambler 1200 

Note that his loom contains a resistor to stop the issue of causing the engine warning light to come on when fitting aftermarket Tail lights.

Wired as Follows:

• Orange - R - is RHS Indicator
• Brown - L - is LHS Indicator
• As part of the T (Tail light) Section we have YELLOW as the Running Light, RED as the Brake Light as well as associated Earths for each of the above

The Tail light connectors all have double spades in the case that you are running for example our Pico 3in1 Rear lights which means you essentially have 2 tail lights (one on each side) 

There is also a spare A Auxiliary Wire in Green which has its own earth, you can either use this to power an external device or you can use it to power a Number Plate Illumination Light if you are running a side mount plate kit which doesnt have a tail light with a license plate illumination light section of its own. 

And remember the top 3 electrical faults are 1 Bad Earth, 2 Bad Earth, 3 Bad Earth.  Always check fuse box - and for belt and braces you may want to disconnect first battery before plugging in new parts. 

MC PART ID: DDM016

MC PART ID: MMU055 

MC PART ID: MMU058 

• Vintage Goggle suitable for every kind of bike including bobbers, scramblers, brat trackers, cafe racers, and old motocross bikes.
• The frame is soft but also compact and fits most helmets.
• The system of filters and foam is innovative and completely covered by COOLMAX.
• The elastic strap is interchangeable thanks to the Velcro closing and there is a silicon strip on the back to keep it from shifting on your helmet. You can purchase additional/replacement straps here.
• The light-sensitive lens is photochromic, making it suitable for any kind of light and temperature.
• BONUS: these goggles are capable of fitting over glasses!

• Vintage Goggle suitable for every kind of bike including bobbers, scramblers, brat trackers, cafe racers, and old motocross bikes.
• The frame is soft but also compact and fits most helmets.
• The system of filters and foam is innovative and completely covered by COOLMAX.
• The elastic strap is interchangeable thanks to the Velcro closing and there is a silicon strip on the back to keep it from shifting on your helmet. You can purchase additional/replacement straps here.
• The light-sensitive lens is photochromic, making it suitable for any kind of light and temperature.
• BONUS: these goggles are capable of fitting over glasses!

• Vintage Goggle suitable for every kind of bike including bobbers, brat trackers, scramblers, cafe racers, and old motocross bikes.
• The frame is soft but also compact and fits most helmets.
• The system of filters and foam is innovative and completely covered by COOLMAX.
• The elastic strap is interchangeable thanks to the Velcro closing and there is a silicon strip on the back to keep it from shifting on your helmet. You can purchase additional/replacement straps here.
• The light-sensitive lens is photochromic, making it suitable for any kind of light and temperature.
• BONUS: these goggles are capable of fitting over glasses!

The Goldtop 75% merino wool socks have a luxurious feel and are perfect for those long glorious days on the bike. These cosy socks come in three sizes so you can be sure you get a pair that fit and aren't just "One size fits all"

PRODUCT INFO

• 75% Merino wool, 15% Polyester, 10% Nylon, 5% Elastic
• Terry loop weave

The Goldtop 80% wool seaboot sock will definitely keep you warm, on or off of the bike! These traditional fishermans socks are extra long at 24" from tip to to toe and come in three sizes so you can be sure you get a pair that fit and aren't just "One size fits all"

PRODUCT INFO

• Made in England
• 80% Aran wool, 20% Nylon fibre
• Off white/Ecru/Cream colour

Towner Riding Boot

Torsten Hallman was a Swedish motocross racer from 1959 to 1971. He is considered one of the greatest racers of all time and was an integral part of bringing motocross racing to the United States. He founded an off-road racing apparel company which is still seen on motocross tracks all over the world today.

• Full Grain Leather Upper Chassis
• Classic Welt Outsole with Shallow Lugs
• Quick-Dry Polyester Interior Lining
• Custom Hallman Branded Insole
• D3O® Ankle Padding
• Oil and slip-resistance
• Fits true to size

• The Turnstone is engineered with an innovative retention system to keep the boot securely in place with a customized fit, and this is achieved via an innovative internal hidden lace system that the user can adjust and tighten properly by activating the adjustable tab on the back of the boot
• The Turnstone is a protective boot; the protective ankle discs are integrated into the elastic side and the lateral and medial side have been engineered in different heights in order to better cover the malleolus
• A dual density ankle medial and external cup protects the malleolus area against impact, with a reinforced heel counter and toe box for additional strength
• The classic elasticated entrance is easy to use and promotes comfort in any situation
• High quality bovine leather
• Innovative hidden retention system
• Alpinestars ride and walk comfort

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Hot Forged out of Solid Brass Billets, machined and then Polished these fork top caps are easy enough to swap out and add some brass to your bike - they are also designed to fit well with The Boss our brass Yoke Nut

This particular listing is for the 47mm Fork Bobber Black, which is also the fork used on the Speedmaster from 2021 On 

For Speedmasters from 2002-2016 you need part MMU512 ,  for the 41mm Liquid Cooled Speedmasters 2018-2020 You need part MMU514

MC PART ID: MMU516

To make these adjuster blocks we decided to return to the manufacturing process of a bygone era to produce the kit, namely Hot Forged Brass.  

To produce a truly individual product the chain adjusters are hand-polished to reveal the facets of the forging process.

A thick Grade 304 Stainless Boss also included

Suitable for use on all the liquid cooled Twins including: 

• Street Twin (Speed Twin 900)
• Street Scrambler (Scrambler 900)
• Street Cup
• Bobber
• T100
• T120
• Thruxton 1200/R/RS
• Scrambler 1200
• Speedmaster
• Speed Twin 1200

MC PART ID: MMU066

Machined out of CZ121 Brass Billet - Yoke Nut is suitable for use on all the 2016 and Up Triumph Twin Motorcycles 

Also known as Triple Tree Nut / Steering Stem Nut and Top Yoke Nut 

Fits the following Liquid Cooled (LC) Triumph Bikes:

• Street Twin (Speed Twin 900)
• Speed Twin
• Street Scrambler (Scrambler 900)
• Street Cup
• Bobber
• Speedmaster
• Thruxton
• Scrambler 1200
• T100
• T120

Please note if you have a 2001-2015 Bonnie check out MMU069 instead

MC PART ID: MMU068

MC PART ID: MSM036

Custom lathed out of aviation grade 6061t Aluminum.

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for extra grip - the lower threaded part of the cap has a spring-bound valve system centrally located in the middle of the bung.

This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.

It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.

Some models it will fit include Bonneville, T100, America, Speedmaster, Thruxton. It will also fit on all post 1983 Harleys with regular right hand thread

FITS ALL YEARS TRIUMPH BONNEVILLE FAMILY BIKES FROM 2001 to NOW

INCLUDING T100, T120, STREET TWIN, STREET CUP, STREET SCRAMBLER, BOBBER, SPEEDMASTER, THRUXTON 900, SCRAMBLER, SE, AMERICA

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THES BIKES (IN BLACK OR POLISH)

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018 PRESENT SPORTSTER, 48, IRON ETC

MC PART ID: NXS003

MC PART ID: MMU067 

MC PART ID: MMU551 

MC PART ID: MMU607+MMU604+MLP001

MC PART ID: MMU621-F

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Cargo pocket style casual riding jeans

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada. 

Tapered Fit, fashionable, and road-ready motorcycle denim.

The Moto 2 TF (tapered fit) motorcycle jeans combine the best of both worlds. They’re motorcycle-ready, while at the same time, are spot-on when it comes to contemporary fashion trends. They feel comfortable at the waist and thigh area, while from the knee down the model tapers, becoming narrower as they reach the ankle.

Taking the fit of a leather motorcycle pants as starting point, these jeans are the perfect companion for longer rides if you like a more sportive look. The secret lies in strategically positioned stretch lips that allow for full freedom of movement on the bike and add to the Moto 2’s all-round style.

A dark grey wash is used and, therefore, easy to combine with any leather or textile jacket. Adjust the knee protection to one of the two the heights you find most comfortable. Furthermore, reflection at the turn up makes it possible to be more visible when you roll up the legs.

Long or short rides, leather or textile jacket, the Moto 2 TF motorcycle jeans are up for the challenge.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Skinny Fit, protective jeans tailored to the urban riding experience.

We use 12.5 oz. CORDURA® DENIM coupled with medium blue wash so they can be combined with almost any color and type of jacket, hoody, or sweater you feel like wearing. Finish with a pair of riding sneakers and you’re good to go. You can wear these on days where you are hopping on and off continually, without changing all the time.

The Carlin SK motorcycle jeans are just that versatile. Go ahead, take them for a spin

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Protective, everyday, Regular Fit jeans that echo your fashion sense.

We updated the level of stretch in the Lombard 3 RF motorcycle jeans to preserve the high level of comfort you experience when you wear them. The protection is there, but it will remain virtually unnoticed when you’re riding, regardless of your riding position.

The stretch ensures that the jeans don’t wrinkle when you get off. These features make the Lombard 3 your ideal partner on a day that you’re riding, but also when you want to look like you’re not wearing motorcycle gear off your bike.

A blue or black wash is available. Regardless of the hue, riders can’t lose! They can be worn with almost everything. The included knee protector pockets are adjustable to two different heights, in order to have your armor at the correct place regardless of your leg length.

Dress them up, or dress them down. The Lombard 3 RF motorcycle jeans are a perfect everyday pair of riding denim for the versatile urbanite.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

***NOTE on this version: the powder coat finish has slightly been blemished in spots during the course of shipping from the manufacturer. Other than the minor cosmetic imperfections, these are good as new and have never been mounted on a motorcycle. Due to the imperfections, we are offering these at a discounted rate. See pictures for noted blemishes circled in red***

Formed out of 300 Series Stainless Steel and designed to fit on your 2016 and up Triumph Twin

This is the Skirmish: Motone's handy little Mini Rack/Passenger Grab Rail/In Garage Parking assistant. Motone made this so if you want to pop out for a quick trip to the shop to grab a 6 pack/coincidentally take cover from your family, well now you have a slightly better excuse. Unlike all the other racks we have seen out there, Motone also included a couple of handy latch tie-down position points.  

The Rail is also useful for parking the bike in a confined space as well as for any passenger.

Compatible Triumph Models:

• Street Twin / Speed Twin 900 
• Street Scrambler / Scrambler 900
• Street Cup
• T100 - *IMPORTANT* - please note fitment conditions below before purchasing as the Skirmish rack does NOT fit the Triumph OEM T100/T120 comfort seat.
• T120 - *IMPORTANT* - please note fitment conditions below before purchasing as the Skirmish rack does NOT fit the Triumph OEM T100/T120 comfort seat.

❌  DOES NOT FIT OEM T100/T120 "COMFORT" SEAT

✅DOES FIT ALL OEM STREET TWIN, SPEED TWIN 900, STREET SCRAMBLER, SCRAMBLER 900 SEATS

✅DOES FIT ALL MOTONE AND ALL KNOWN AFTERMARKET SEATS

✅DOES FIT OEM T100/T120 TRIUMPH QUILTED & RIBBED BENCH SEAT

If you have a pre-2016 bike, Motone will have a version out for your bike at some point, please don't buy this on the off chance it will fit - the bolt holes are in different positions.  

Unfortunately the Speed Twin 1200 has a different subframe so won't fit - but Motone may do a version.

MC PART ID: MCB026

MC PART ID: MSM028

MC PART ID: KNS002

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Semi-ventilated, short-cuffed urban sport gloves

MC PART ID: PTS011

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Protective, everyday, Regular Fit jeans that echo your fashion sense.

We updated the level of stretch in the Lombard 3 RF motorcycle jeans to preserve the high level of comfort you experience when you wear them. The protection is there, but it will remain virtually unnoticed when you’re riding, regardless of your riding position.

The stretch ensures that the jeans don’t wrinkle when you get off. These features make the Lombard 3 your ideal partner on a day that you’re riding, but also when you want to look like you’re not wearing motorcycle gear off your bike.

A blue or black wash is available. Regardless of the hue, riders can’t lose! They can be worn with almost everything. The included knee protector pockets are adjustable to two different heights, in order to have your armor at the correct place regardless of your leg length.

Dress them up, or dress them down. The Lombard 3 RF motorcycle jeans are a perfect everyday pair of riding denim for the versatile urbanite.

MC PART ID: ENG303

MC PART ID: MMU016

MC PART ID: MMU022

MC PART ID: MMU012

TRIUMPH SCRAMBLER 1200 XC-XE PLATE HOLDER HIGH

The stock rear plastic on the Scrambler 1200 bothered us, so we made this high mount plate holder to fix it and the end result is fantastic: once mounted it is one with the rest of the bike. Made of steel tube painted black with epoxy powders. It is supplied complete with a removable and height-sliding LED license plate light, a protective casing to close the lower area of the mudguard to replace the original plastic, screws, and vibration dampers. It is very simply fixed to the frame and allows you to significantly change the character and style of the bike at the rear by shortening and raising the number plate. Complete with all necessary mounting hardware, it is compatible with all Unit Garage pannier racks or luggage racks.

Code: 3148 

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

Although the Sand 4 gloves have been designed to create a perfect match with the Sand 4 H2O outfit, these gloves are bound to become the go-to gloves for a large audience of adventure riders across the globe. This pair of hand protection has been specifically designed and engineered for summer use, providing optimal grip, breathability, and ventilation. To make sure your hands stay cool and dry during hot summer rides, the gloves are constructed of strong and abrasion-resistant mesh stretch fabrics combined with a high-tech TPR knuckle protector that is designed to direct the airflow into the glove and onto the hands of the rider. Multiple perforation holes on the outside and inside increase the breathability even more. For additional protection, we added TPR protectors on the fingers and thumbs; providing a high level of protection without compromising comfort or flexibility. A TPR palm slider ensures a controlled slide in case of an unfortunate mishap. The gloves can easily be put on thanks to the handy pull tab on the cuff and then secured with the hook-and-loop wrist strap. Adjusting your route during your journey is a breeze thanks to the integrated Connect Finger Tip which makes it possible to control your touchscreen device while leaving your gloves on. Enjoy the summer breeze with the Sand 4 gloves.

Features

Connect Finger Tip
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.

Grip panel at palm
This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.

Outside stitching
The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.

Pull tab
Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone

Regular cuff

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Style-centric, boyfriend-fit women’s riding jeans

PRODUCT DESCRIPTION

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

Although the Sand 4 gloves have been designed to create a perfect match with the Sand 4 H2O outfit, these gloves are bound to become the go-to gloves for a large audience of adventure riders across the globe. This pair of hand protection has been specifically designed and engineered for summer use, providing optimal grip, breathability, and ventilation. To make sure your hands stay cool and dry during hot summer rides, the gloves are constructed of strong and abrasion-resistant mesh stretch fabrics combined with a high-tech TPR knuckle protector that is designed to direct the airflow into the glove and onto the hands of the rider. Multiple perforation holes on the outside and inside increase the breathability even more. For additional protection, we added TPR protectors on the fingers and thumbs; providing a high level of protection without compromising comfort or flexibility. A TPR palm slider ensures a controlled slide in case of an unfortunate mishap. The gloves can easily be put on thanks to the handy pull tab on the cuff and then secured with the hook-and-loop wrist strap. Adjusting your route during your journey is a breeze thanks to the integrated Connect Finger Tip which makes it possible to control your touchscreen device while leaving your gloves on. Enjoy the summer breeze with the Sand 4 gloves.

Features

Connect Finger Tip
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.

Grip panel at palm
This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.

Outside stitching
The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.

Pull tab
Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone

Regular cuff

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.