MOTORCYCLE PARTS

MOTONE NAUTILUS EXHAUST SYSTEM - TRIUMPH BOBBER / SPEEDMASTER

8.777,00 kr

Motone Nautilus Exhaust System - Full Exhaust System for your Triumph Bobber or Speedmaster

Tig-Welded out of 300 Series Stainless Steel Pie-cuts the Nautilus is a full system for your Triumph Bobber or Speedmaster - this system replaces the stock cat and has a H-Pipe connector between both headers (no x-pipe or additional parts required to fit)

We also include some inline dB killers as standard - these can easily be removed for extra volume - leaving them in allows you for a more subtle getaway whilst the engine is at low revs for those who have to bundle out of the bedroom window ay 5am hoping to make for a stealthy getaway

Fitment:

2017+ Triumph Bobber
2018+ Triumph Speedmaster

Notes:

If you're replacing your exhaust system, we also recommend replacing the copper exhaust gaskets at the same time. You can add the exhaust gaskets to your cart here.
Enhance the look of your new exhaust system with the Motone Finned Exhaust clamps. You can add these to your order by clicking here.

MC PART ID: MTE192

MOTONE NAUTILUS EXHAUST SYSTEM - TRIUMPH BOBBER / SPEEDMASTER

MOTONE NAUTILUS EXHAUST SYSTEM - SPEED TWIN/THRUXTON 1200

8.777,00 kr

Motone Nautilus Exhaust System - Speed Twin/Thruxton 1200

Replaces complete exhaust system in your bike including the cat - a cross over pipe is integral to the design providing a H-Pipe type distribution of torque

Baffles are included in the main body of the pipes to modulate the sound to keep it below ear bleeding - still loud not insane

Pipes are built using a system of tig welded pie-cuts of 300 Series Stainless Steel

Bolt-On for all variants of the Speed Twin 1200 and Thruxton 1200, including:

Speed Twin 1200 Eur 4
Speed Twin 1200 Eur 5
Thruxton 1200
Thruxton R
Thruxton RS
Thruxton TFC

Note: If you're replacing your exhaust system, we also recommend replacing the copper exhaust gaskets at the same time. You can add the exhaust gaskets to your cart here.

MC PART ID: MTE195

MOTONE NAUTILUS EXHAUST SYSTEM - SPEED TWIN/THRUXTON 1200

MOTONE NAUTILUS EXHAUST SYSTEM - T100/T120 LC

8.777,00 kr

Motone Nautilus Exhaust System - Full Exhaust System for your Triumph Bonneville T100 or T120

Replaces complete exhaust system in your bike including the cat - a cross over pipe is integral to the design providing a H-Pipe type distribution of torque

Baffles are included in the main body of the pipes to modulate the sound to keep it below ear bleeding - still loud not insane

Pipes are built using a system of tig welded pie-cuts of 300 Series Stainless Steel

This system fits the T120/T100 Liquid Cooled Platform so thats any year T120 (from 2016 to today) including Eur 4 and Eur 5 updates

And also the T100 LC so any T100 2017 to now

Notes:

If you're replacing your exhaust system, we also recommend replacing the copper exhaust gaskets at the same time. You can add the exhaust gaskets to your cart here.
Enhance the look of your new exhaust system with the Motone Finned Exhaust clamps. You can add these to your order by clicking here.

MC PART ID: MTE193

MOTONE NAUTILUS EXHAUST SYSTEM - T100/T120 LC

MOTONE COPPER EXHAUST RING GASKETS

95,00 kr

Suitable for use on all Liquid Cooled Triumph Bonneville 900 and 1200 cc Motors 2016 and up including:

Triumph Bonneville T100
Triumph Bonneville T120
Street Twin
Street Cup
Street Scrambler
Speed Twin
Bobber
Speedmaster
Scrambler 1200

MC PART ID: ENG303

MOTONE SPEED DIAMOND SEAT FOR TRIUMPH SPEED TWIN 1200 - BLACK

2.372,00 kr

This is the MOTONE SPEED DIAMOND SEAT:

INJECTION MOLDED BASE
INJECTION MOLDED HIGH DENSITY POLYEURETHENE FOAM for max comfort
DIAMOND STITCH PATTERN

ONLY FITS SPEED TWIN 1200 (ALL VARIANTS 2019 to NOW, both EUR4 and EUR5 variants)

See separate listing for the "Blackadder" seat that fits other Triumph LC models including the Bonneville T100 / T120 / Street Scrambler / Street Twin/Speed Twin 900 which have a different subframe

MC PART ID: MSM034

MOTONE SPEED DIAMOND SEAT FOR TRIUMPH SPEED TWIN 1200 - BLACK

MOTONE STREET TRACKER SEAT - BLACK

2.847,00 kr

Street Tracker Seat - Available here Black

Slim cut precision injection molded Base Design with slim style race cushion

THIS IS A FLAT TRACKER Style Seat for your Triumph Twin

Inspired by King Kenny Racing XS650 and the almighty Harley XR750 and far too much time leafing through the pages of Sideburn magazine - we have done a very limited edition production of these seats here. Obviously, as a race-style seat you do not have the same amount of cushioning you would have with one of our regular seats like the Viper so please bear that in mind.

The seat works with all known configurations of tail tidies and rear mudguard setups including the stock ones however in our opinion for optimal looks it matches best with a short rear fender or a tail tidy such as the "Gort" as pictured.

Injection molded ABS seat base - Gloss Black Automotive Paint

Injection-molded high-density polyurethane foam

This Seat Fits 2016 and up :

Street Twin / Speed Twin 900 / Street Cup / Street Scrambler /Scrambler 900 / T100 LC / T120

This Seat is specifically designed for the above frame and will not fit other frames (like the Speed Twin 1200 etc) - but if you nag us we might make a version for your bike as well.

If you have an air-cooled Twin 2001-2015 due to the length of the frame we haven't found a way to make a seat this style look good without chopping the frame so please bear that in mind.

MC PART ID: MSM037

MOTONE "THE BLACKADDER" LOW PROFILE SKINNY DIAMOND STITCH SEAT - BLACK

2.372,00 kr

The BLACKADDER - Available here Black

Slim cut low profile bench seat - the idea with this seat was to keep it as neat and trimmed back to the proportions of the frame as possible whilst maintaining optimal comfort - this stitch pattern is inspired by our ever popular Mamba Seat for the previous generation Bonnevilles - by popular request - now available for the liquid cooled bikes

Injection molded ABS seat base

Injection molded high density high comfort polyurethane foam

This Seat Fits 2016 and up :

Street Twin / Street Cup / Street Scrambler / T100 / T120

If you have a bike that is earlier than 2016 check out the Mamba or the Krait instead

MC PART ID: MSM028

MOTONE "THE BLACKADDER" LOW PROFILE SKINNY DIAMOND STITCH SEAT - TOBACCO BROWN

2.372,00 kr

The BLACKADDER - Available here in Tobacco Brown

Slim cut low profile bench seat - the idea with this seat was to keep it as neat and trimmed back to the proportions of the frame as possible whilst maintaining optimal comfort - this stitch pattern is inspired by our ever popular Mamba Seat for the previous generation Bonnevilles - by popular request - now available for the liquid cooled bikes

Injection molded ABS seat base

Injection molded high density high comfort polyurethane foam

This Seat Fits 2016 and up :

Street Twin / Street Cup / Street Scrambler / T100 / T120 / Speed Twin 900 / Scrambler 900

If you have a bike that is earlier than 2016 check out the Mamba or the Krait instead

If you have a Speed Twin 1200 Check out the Speed Diamond

MC PART ID: MSM036

MOTONE "THE VIPER" LOW PROFILE SKINNY RIBBED SEAT - BLACK

2.372,00 kr

The Viper - Available here Black

Slim cut low profile bench seat - the idea with this seat was to keep it as neat and trimmed back to the proportions of the frame as possible whilst maintaining optimal comfort

Injection molded ABS seat base

Injection molded high density high comfort polyurethane foam

This Seat Fits 2016 and up: Street Twin / Street Cup / Street Scrambler / T100 / T120

MC PART ID: MSM025

MOTONE "THE VIPER" LOW PROFILE SKINNY RIBBED SEAT - RARE EARTH LT. BROWN

2.372,00 kr

The Viper - Available here in Rare Earth Light Brown

Slim cut low profile bench seat - the idea with this seat was to keep it as neat and trimmed back to the proportions of the frame as possible whilst maintaining optimal comfort

Injection molded ABS seat base

Injection molded high density high comfort polyurethane foam

This Seat Fits 2016 and up: Street Twin / Street Cup / Street Scrambler / T100 / T120

Note: while pictures of the seat shown on the Bike are of the version for the air-cooled Bonneville, the pictures are intended to give you an idea of what it would look like on your bike liquid-cooled Bonneville as this seat is intended for the liquid-cooled Bonnevilles mentioned above.

MC PART ID: MSM032

MOTONE "THE VIPER" LOW PROFILE SKINNY RIBBED SEAT - TOBACCO BROWN

2.372,00 kr

The Viper - Dark Tobacco Brown

Slim cut low profile bench seat - the idea with this seat was to keep it as neat and trimmed back to the proportions of the frame as possible whilst maintaining optimal comfort

Injection molded ABS seat base

Injection molded high density high comfort polyurethane foam

This Seat Fits 2016 and up: Street Twin / Street Cup / Street Scrambler / T100 / T120

MC PART ID: MSM026

MOTONE KING COBRA RIBBED SEAT FOR TRIUMPH BOBBER - BLACK

2.372,00 kr

When the Triumph Bobber first came out the first thing I wanted to change was the seat. If only it was that simple. 3 or 4 years later - this is the result - for safety we made the pan out of 4mm thick Steel which made for some fairly hefty tooling. For comfort we made the foam using a high-density polyurethane injection moulded closed-cell foam. We have done a few different stitch patterns - this one we call the King Cobra.

MC PART ID: MSM029

MOTONE KING COBRA RIBBED SEAT FOR TRIUMPH BOBBER - BLACK

RIZOMA HEADLIGHT GUARD FOR BMW R 1250 GS 2021-22 - ZBW064B

2.175,00 kr

Rizoma has, thanks to the rapid attachment/release system, designed its headlight guard to strike the right balance between practicality, looks, and function. The guard protects the GS headlight while the one-piece rim and high-quality PLEXIGLASS® provide outstanding protection. Caution: headlight guard ZBW064 has been developed for off-road use. Rad!

RIZOMA HEADLIGHT GUARD FOR BMW R 1250 GS 2021-22 - ZBW064B

UNIT GARAGE DARK SMOKE WINDSHIELD WITH GPS SUPPORT FOR TRIUMPH 1200 XC-XE

2.064,00 kr

Windshield with GPS support for Triumph 1200 XE-XC
Complete with supports and screws, it perfectly fits the style and lines of the front. Made of 4mm thick PMMA (Acrylic). It mounts very easily and offers excellent aerodynamic protection. The front louver eliminates turbulence, and the support tube doubles as a GPS mount.

Code: 3105DS

UNIT GARAGE DARK SMOKE WINDSHIELD WITH GPS SUPPORT FOR TRIUMPH 1200 XC-XE

UNIT GARAGE CLEAR WINDSHIELD WITH GPS SUPPORT FOR TRIUMPH T120

2.064,00 kr

Windshield with GPS support for Triumph Bonneville T120
Complete with supports and screws, it perfectly fits the style and lines of the front. Made of 4mm thick PMMA (Acrylic)
It mounts very easily and offers excellent aerodynamic protection. The front louver eliminates turbulence, and the support tube doubles as a GPS mount.

Code: 3149TR

UNIT GARAGE CLEAR WINDSHIELD WITH GPS SUPPORT FOR TRIUMPH T120

UNIT GARAGE WINDSHIELD WITH GPS SUPPORT FOR NINET SCRAMBLER-PURE

2.064,00 kr

Windshield with GPS support for ninet Scrambler-Pure
Complete with supports and screws, it is perfectly in style with the lines of the front. Made of 4mm thick PMMA (Acrylic). It mounts very easily and offers excellent aerodynamic protection. The front louver eliminates turbulence, and the support tube doubles as a GPS mount.
Colours: choose the colour in the list: (transparent, dark smoke, yellow).

NB: It is compatible with the original instrument

UNIT GARAGE WINDSHIELD WITH GPS SUPPORT FOR NINET SCRAMBLER-PURE

BEELINE MOTO CARRY CASE

72,00 kr

Beeline Moto Case

This zippered EVA hard case has a soft, padded interior with room for your Beeline Moto and charging cable. Thanks to the handy carabiner, you can easily attach it to your belt, bag, or backpack and always have your Beeline Moto at hand.

Features:

The padded, soft inner lining provides protection from scratches and shocks
Convenient carabiner for individual attachment
Full-length zipper for easy removal

Contents:

1x Beeline Moto case

MOTONE DEFENDER MKII (BOBBER) SUMP GUARD - BLACK

1.376,00 kr

Deep Drawn from type 5052 Aluminium Sheet - the Motone Defender Sump Guard

Hand Brushed and then Anodised Black

Designed and Built to Last - there is a lot of junk out there

DEFENDER MKII Suitable for all years TRIUMPH BOBBER 1200 (Both the Bobber Black, Standard Bobber, Single Disc Bobber etc).

This part will not fit with factory forward controls therefore won't work with the Speedmaster 1200 which has forward controls on most common variants

MC PART ID: MTE182

MOTONE DEFENDER MKII (BOBBER) SUMP GUARD - BLACK

MOTONE BILLET RADIATOR GUARD KIT - UNION JACK - BLACK WIDE (BOBBER / SPEEDMASTER)

1.234,00 kr

Motone Rad Guard for Wider Rads of the Liquid Cooled Triumph Bobber and Speedmaster only

Casing precision milled out of 6061T Billet Aluminium and then anodised a matte black.

Rear grill is laser cut out of steel and finished in a black powder coat.

Full assembly comes ready to fit to your bike as a complete kit.

MC PART ID: KNS002

MOTONE BILLET RADIATOR GUARD KIT - UNION JACK - BLACK WIDE (BOBBER / SPEEDMASTER)

MOTONE BILLET RADIATOR GUARD KIT - UNION JACK - BLACK

1.234,00 kr

Motone Rad Guard for all Liquid Cooled Triumph Twins.

Casing precision milled out of 6061T Billet Aluminium and then anodised a matte black.

Rear grill is laser cut out of steel and finished in a black powder coat.

Full assembly comes ready to fit to your bike as a complete kit.

Good for all the liquid cooled bikes :

Street Twin, Street Cup, Street Scrambler, Thruxton, Thruxton R, T100 LC, T120

Please note although this will fit the Bobber and the Speedmaster which have a slightly wider Rad there is also a specific wider version for those bikes - please see part KNS002

MC PART ID: KNS001

MOTONE BILLET RADIATOR GUARD KIT - UNION JACK - BLACK

MOTONE CUSTOM FUEL GAS CAP - BILLET ALUMINIUM - BLACK

617,00 kr

Custom lathed out of aviation grade 6061t Aluminum.

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for extra grip - the lower threaded part of the cap has a spring-bound valve system centrally located in the middle of the bung.

This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.

It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.

Some models it will fit include Bonneville, T100, America, Speedmaster, Thruxton. It will also fit on all post 1983 Harleys with regular right hand thread

FITS ALL YEARS BONNEVILLE THRUXTON, AMERICA, T100, SPEEDMASTER, SE, SCRAMBLER, BOBBER, STREET TWIN, STREET CUP, STREET SCRAMBLER, T120: 2001-2018 Present - Fits both CARB and EFI bikes.

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018 PRESENT SPORTSTER, 48, IRON ETC

MC PART ID: NXS006

MOTONE CUSTOM FUEL GAS CAP - BILLET ALUMINIUM - BLACK

MOTONE BLACKJACK UNION JACK MONZA CAP KIT FOR TRIUMPH & HD - CONTRAST POLISHED

949,00 kr

Supplied here with cap in Black Finish with Polished Fins

Kit Suitable for

Triumph Twins 2001-2015 (T100, Thruxton, SE, Scrambler)
Triumph Twins 2016-Present (Bobber, T100, T120, Street Cup, Street Twin etc)
Harley Davidson 1983 and Up (Sportster, Dyna, etc)
Moto Guzzi V7
Royal Enfield Classic (with screw top type filler bung)

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THESE BIKES (IN BLACK OR POLISH)

Monza cap built by Motone using modern HIGH PRESSURE DIE CAST technology

Triumph/HD Fuel tank adapter kit CNC formed out of billet aviation-grade aluminium

INSTRUCTIONS HERE

MC PART ID: NMX019+NMX003

MOTONE BLACKJACK UNION JACK MONZA CAP KIT FOR TRIUMPH & HD - CONTRAST POLISHED

MOTONE CUSTOM SOLID BRASS MONZA CAP KIT - LIMITED RUN

1.186,00 kr

We have handmade and polished a very short run of these caps.

Get them while they are hot - not for long

Kit Suitable for

Triumph Twins 2001-2015 (T100, Thruxton, SE, Scrambler)
Triumph Twins 2016-Present (Bobber, T100, T120, Street Cup, Street Twin etc)
Harley Davidson 1983 and Up (Sportster, Dyna, etc)
Moto Guzzi V7
Royal Enfield Classic (with screw top type filler bung)

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THES BIKES (IN BLACK OR POLISH)

Triumph/HD Fuel tank adapter kit CNC formed out of billet aviation grade aluminium

INSTRUCTIONS HERE

MC PART ID: NMX020+NMX003

MOTONE CUSTOM SOLID BRASS MONZA CAP KIT - LIMITED RUN

MOTONE CUSTOM FUEL GAS CAP - BILLET ALUMINIUM - SPUN SATIN FINISH

617,00 kr

Custom lathed out of aviation grade 6061t Aluminum.

This sale is for the complete new cap fully assembled and ready to fit on your bike. This version has spun Satin Finish.

Sides of the top cap knurled for extra grip - the lower threaded part of the cap has a spring-bound valve system centrally located in the middle of the bung.

This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.

It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.

FITS ALL YEARS TRIUMPH BONNEVILLE FAMILY BIKES FROM 2001 to NOW INCLUDING T100, T120, STREET TWIN, STREET CUP, STREET SCRAMBLER, BOBBER, SPEEDMASTER, THRUXTON 900, SCRAMBLER, SE, AMERICA

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THES BIKES (IN BLACK OR POLISH)

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018 PRESENT SPORTSTER, 48, IRON ETC

MC PART ID: NXS010

MOTONE CUSTOM FUEL GAS CAP - BILLET ALUMINIUM - SPUN SATIN FINISH

MOTONE CUSTOM FUEL GAS CAP - BILLET BRASS & ALUMINIUM

665,00 kr

Custom lathed out of aviation grade 6061t Aluminum.

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for extra grip - the lower threaded part of the cap has a spring-bound valve system centrally located in the middle of the bung.

This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.

It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.

Some models it will fit include Bonneville, T100, America, Speedmaster, Thruxton. It will also fit on all post 1983 Harleys with regular right hand thread

FITS ALL YEARS TRIUMPH BONNEVILLE FAMILY BIKES FROM 2001 to NOW

INCLUDING T100, T120, STREET TWIN, STREET CUP, STREET SCRAMBLER, BOBBER, SPEEDMASTER, THRUXTON 900, SCRAMBLER, SE, AMERICA

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THES BIKES (IN BLACK OR POLISH)

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018 PRESENT SPORTSTER, 48, IRON ETC

MC PART ID: NXS003

MOTONE CUSTOM FUEL GAS CAP - BILLET BRASS & ALUMINIUM

MOTONE CUSTOM FUEL GAS CAP - BILLET BRASS & ALUMINIUM - SPUN SATIN FINISH

665,00 kr

Custom turned on a lathe out of aviation grade Brass and 6061t Aluminum.