MOTORCYCLE PARTS

Fits any LC 2016 and up Triumph Twin 

SIDEKICK SLIM - This is the SLIM version for Vertical Orientation USA Spec License Plates 

We have made several versions of this kit - this version includes a license plate light but no tail light, we also have a tail light version

Kits Consists of

• Axle Plate Bracket - Forged Stainless Steel (MMU607)
• SLIM USA SPEC Side Mount Plate Mount Kit - Laser Cut Aluminium - Black Powder Coat (MMU618)
• The Pillbox - our E-Marked Street Legal Micro LED License Plate Light - 6061 Billet Aluminium and 120cm of wiring cable with 3.9mm bullet connector terminals 

The Number plate itself mounts to Axle Plate Bracket using counter sunk screws which are provided - the plate has counter sunk holes at various levels so you can set it at a suitable height for the size of your number plate on your bike. 

The Pillbox Light is designed to Plug and Play directly into any Motone rear wiring loom plug and play adapters

For Example this one DDM016 for the BOBBER/Speedmaster/Scramber 1200/Speed Twin 1200 EURO4 

Or For Street Twin/Speed Twin 900/T100/T120 this one DDM021

Or Speed Twin 1200 EURO5 This one DDM017

MC Part ID: MMU607+MMU618+MLP001

Motone Rad Guard - Special Version ONLY for the Triumph Scrambler 1200 (all variants X, XE, XC ETC) 

Casing precision milled out of 6061T Billet Aluminium and then anodized a matte black.

Rear grill is laser cut out of steel and finished in a black powder coat.  

Full assembly comes ready to fit to your bike as a complete kit. 

FASTBACK Seat  - Available here Black

This is our proper CAFE RACER Seat for your modern Bonneville

24 months in development 

Seat works with all known configurations of tail tidies and rear mudguard setups including the stock ones however in our opinion for optimal looks it matches best with a short rear fender or a tail tidy with something like the Gort Light as pictured. 

Injection molded ABS seat base - Gloss Black Automotive Paint

Injection molded high density polyurethane foam 

This Seat Fits 2016 and up : Street Twin / Speed Twin 900 / Street Cup / Street Scrambler  /Scrambler 900 / T100 LC / T120

This Seat is specifically designed for the above frame and will not fit other frames (like the Speed Twin 1200, etc) - but if you nag Motone, they might make a version for your bike as well ;)

MOTONE ICON LED T/S : TURN SIGNAL / INDICATORS

SOLD HERE : PAIR [2 TURNSIGNALS]

• ECE R148 - LAB TESTED FULLY COMPLIANT ROAD LEGAL
• CUSTOM PCB 
• FULL METAL JACKET - ALUMINIUM HOUSING
• ORSAM SMD LED
• BRAIDED CABLES TERMINATING IN 3.9MM BULLET CONNECTORS
• WATERPROOF
• RUBBER BOOT CABLE TIDY 
• INPUT : DC 13.5v
• Power : 2.7 W Indicator
• PMMA LENS
• SIZE W 44 x H 87.5 x D 6r.6 mm
• MOUNTED ONTO A M8 THREAD 

Combine with various brackets and adapters we make to fit anywhere on your bike we are working on more options all the time 

• Brackets for front of bike:
• Billet Adapter Brackets mount M8 Indicators such as the PICO direct to stock Triumph Indicator position (2016 and up bikes)
• Clampit Brackets to mount to front fork 41mm (other sizes also coming)
• Boomerang Bracket - fits on the bottom yoke suitable for the Street Twin/Speed Twin 900 
• Brackets for rear of bike:
• V2 Shock Mount Brackets to mount to rear shock
• Under Seat Brackets LC Triumph - Use the bolt holes under the rear of the seat to fit Indicators towards rear of frame - Liquid Cooled Bonneville so 2016 to 2025+)
• Under Seat Brackets AC Triumph - Under seat brackets for the aircooled (2001-2015) Bonnevilles
• Triline Brackets to mount to Rear Shock
• Ajax - Designed specifically for the Triumph Bobber these brackets allow you to fit signals onto the rear of the bike using the airbox bolts
• Number Plate Brackets - Adapter Brackets that allow the lights to be fit direct to your rear number plate bracket without needing to drill any holes etc 

Wiring Adapters

Please note if you have one of our tail tidies or rear loom adapters they would already terminate in a 3.9mm Bullet so plug and play from there one

• DDM011: Wiring Adapter to Convert to OE Triumph Wiring Plugs (2016 to 2025+)
• DDM004: Wiring Adapter to Convert to OE Triumph 2001-2015
  
• DDM014 Wiring Adapter for Royal Enfield 650
• DDM005 Wiring Adapter for Royal Enfield Meteor/Hunter 350

Motone Quality - High Pressure Die Cast Engine Clutch Side Engine Cover

Ribbed Design with polished fins - Black paint on lower face to match the factory black used throughout the bike

Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today: Street Twin, Street Cup, Street Scrambler, Scrambler 1200, Bonneville Bobber, T100 , T120, Thruxton, Speedmaster, Speed Twin

Motone Quality - HIGH PRESSURE PRECISION DIE CAST

This cover is for the ACG (What was once known as the "Points" Cover on the Vintage Meriden Triumphs) - The smaller of the two round engine covers.  Clutch Side Badges/Covers are also available. 

Wrinkle Black Paint with Contrast Mirror Polished Outer Surface 

Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today: Street Twin, Street Cup, Street Scrambler, Scrambler 1200, Bonneville Bobber, T100 , T120, Thruxton, Speedmaster, Speed Twin

Motone Rad Guard for all Liquid Cooled Triumph 400 Singles

Casing precision milled out of 6061T Billet Aluminium and then anodised a matte black.

Rear grill is laser cut out of steel and finished in a black powder coat.  

Full assembly comes ready to fit to your bike as a complete kit. 

Good for all the 400cc Triumphs

Motone Quality - Hot Forged in Solid Brass 

Union Flag Motif

This cover is for the CLUTCH side (the larger round badge on the left hand side of the bike)

Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today

• Street Twin
• Street Cup
• Street Scrambler
• Scrambler 1200
• Bonneville Bobber
• T100
• T120
• Thruxton
• Speedmaster
• Speed Twin

Motone Quality - HIGH PRESSURE PRECISION DIE CAST

This cover is for the ACG (What was once known as the "Points" Cover on the Vintage Meriden Triumphs) - The smaller of the two round engine covers.  Clutch Side Badges/Covers are also available.  

Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today: Street Twin, Street Cup, Street Scrambler, Scrambler 1200, Bonneville Bobber, T100 , T120, Thruxton, Speedmaster, Speed Twin

Ribbed Clutch/Primary Side Engine Cover/Badge suitable for all the 900 and 1200cc Triumph Twins from 2016 to now.

Motone Quality - High Pressure Precision Die Cast and finished in a wrinkle black to match the engine paint. 

We took inspiration from the 1960s US Triumph tuning company Webco (who in turn were inspired by Mangus and others before them) to create this new range of finned engine parts.  Unlike the vintage Triumph-aftermarket companies who generally employed a low grade kind of sandcasting at Motone we employ only high spec precision high pressure die casting - this means we can control the perfect size of our product every time and dont have to worry about porousity and shrinkage and things like that which you would when doing sand cast.  Thats how come Motone die cast parts are the best out there. 

Precision fit part - Bolt on - Fit at home 

Fits all the new twins : Street Twin, Street Cup, Street Scrambler, T100, T120, Scrambler 1200, Speed Twin, Bobber, Speedmaster

Sold as a pair.  Made using the same technology as the original equipment manufacturing process, high pressure die cast.  

Suitable for any of the 1200 twins.

Fits :   T120, Thruxton R, Thruxton S, Bobber, Speedmaster

Sold here in Black finish

The covers come with 6 brass bolts similar to those found on the original monobloc Amal carbs, which were of course the inspiration for the look of the throttle body that Triumph has employed on these motors - fitment of the brass bolts is optional - you can also reuse your stock silver bolts. 

Sold as a Pair for a set of 2 Indicators this converts the proprietary plug used in your bike to a more standard "Japanese style" 3.9mm Bullet Connector (as used on most aftermarket indicators including Motone) 

Fits Royal Enfield -  Himalayan - the Meteor and the Hunter 

Fits TRIUMPH 400 FRONT ONLY - Speed 400 / Scrambler 400 X

Inspired by Colin Chapmans Lotus Type 49 Nose Cone this is the FORTYNINER - Underbelly/Airscoop Styling Kit for your modern classic - Injection Molded ABS and Painted Automotive Gloss Black with aluminum Mesh 

FORTYNINER Suitable for 2016 and Up Modern Classic Triumph motorcycles 

Street Cup

Street Twin

Street Scrambler

Speed Twin 900/1200

Thruxton 1200/R/RS

T100

T120

The Viper Mk.II (Double Stitch) - Available here Black

Slim cut low profile bench seat - the idea with this seat was to keep it as neat and trimmed back to the proportions of the frame as possible whilst maintaining optimal comfort

Injection molded ABS seat base

Injection molded high density high comfort polyurethane foam 

This Seat Fits 2016 and up : 

Street Twin / Street Cup / Street Scrambler / T100 / T120

If you have a bike that is earlier than 2016 check out the Krait

MC PART ID: MMU500

Sold as a pair. 

CNC Machined out of Billet Aluminium and Anodised Black 

These adapters  fit directly onto the stock Indicator Mounts to allow you to fit an aftermarket Indicator with a regular 8mm Thread.

The final position angle of your indicator is controlled by a stainless grub screw which locks the Indicator light in place.

This version is for Indicators with 8mm Threads (Such as our ICON and PICO indicators as well as many others)

This product for Indicators/Turn Signals with 8mm Threads. 

This is Specific fitment for the TRIUMPH 400 (400X, Speed 400, etc) - FRONT Indicators Only - Different version for rear - See ADT005 for rear version

Sold as a pair. 

CNC Machined out of Billet Aluminium and Anodised Black 

These adapters  fit directly onto the stock Indicator Mounts to allow you to fit an aftermarket Indicator with a regular 8mm Thread.

The final position angle of your indicator is controlled by a stainless grub screw which locks the Indicator light in place.

This version is for Indicators with 8mm Threads (Such as our ICON and PICO indicators as well as many others)

This product for Indicators/Turn Signals with 8mm Threads. 

This is Specific fitment for the TRIUMPH 400 (400X, Speed 400, etc) - REAR Indicators Only - Different version for Front - See ADT004 for front version

MC PART ID: MMU581

Bolt on Replacement for the Stock Riser Clamp assembly which works on any of the Triumph Bonneville family which have one inch bars.

We originally designed the Up-And-Over Kit to give you a one inch rise and a one inch pull back over standard bar position.  This is about as far as you can take the stock bars without having to install longer cables.

Easy to fit at home with basic tools. 

Fits : T100 (all years aircooled and liquid cooled), T120, Speedmaster (air and liquid cooled models), Bobber, Thruxton EFI, America  

Version 2.0 - Investment Cast Stainless Steel 

Big Fin Exhaust Clamps for LC Triumph Twins - Supplied here in BLACK finish

Inspired by the Webco finned cooling parts of the 1970s these are bolt on replacement for your stock clamps 

These fit all the 900 and 1200 cc Triumph Twins except the Thruxton/Speed Twin 1200 

These fit

2016 and UP : Street Twin, Street Cup, Street Scrambler, Speedmaster, Bobber, T100, T120, Speed Twin 900, Scrambler 900