MOTOGADGET MO.BLAZE ADAPTER FOR BMW R9T - BLACK

mo.view METAL MIRROR

Motogadget now exclusively presents its glassless mirror series mo.view. The special feature of this motorcycle mirror is the patented mirror surface, which is worked directly into the metal of the body. The Aluminium itself is the mirror surface!

A weightless design without edge and frame is possible and the mirror body itself becomes very thin and light.

Shattered glass or glass that has fallen-out of its housing are simply not possible!

The convex mirror surface is produced in flycutting by means of diamond tools on ultra-precision machines. It is then made resistant to oxidation, corrosion, and abrasion by a complex plasma coating process in a vacuum.

The mirror body, mirror arm, and the clamp for the handlebar end are milled on CNC machines from solid aluminium and anodized to a high quality. All screws are made of stainless steel. The precise ball joint allows a comfortable and very stable adjustment of the mirror.

mo.view spy

The handle bar end mirror mo.view spy is very small, reduced, and fits perfectly to our bar end indicators and the grip mo.grip, as well as the push button, controls mo.switch and mo.switch mini. It can be mounted above or below the handlebars. The mirror is suitable for the right and left sides. It is mounted directly on the handlebar end or - if you cannot move your grips and controls - with the mo.view bar adapter. 

Note

The size of the mirror surface of the mo.view spy does not correspond to the EU law. Therefore it is not approved according to ECE.

This sale is for EACH mirror. If you'd like a mirror for both sides, order two mirrrors. 

Specifications and features

Dimensions

• Diameter of mirror body: 75 mm
• Thickness of the mirror body without ball head: 4 mm
• Length of the stem: 61 mm
• Inner diameter of the clamp: for 22 mm and 1 inch handlebar
• Clamping width: 8 mm
• Weight: 86 g

INCLUDES 

• Rearview mirror mo.view blade with stem and clamp, manual

bar adapter uni disc/cone

Please note: one package contains 2 adapters.

The bar adapter uni disc/cone allows the mounting of all mo.view handlebar end mirrors in combination with the mo.blaze handlebar end indicators without moving the grips and controls on the handlebars. It creates a clamping surface for the handlebar end mirror outside the steering tube and at the same time allows the mounting of the handlebar end indicators. Whether for the mo.view blade, mo.view spy, mo.view flight, mo.view cafe, mo.view road, mo.view pace, mo.view cruise or mo.view street.

It is CNC machined from billet aluminum and black anodized. The clamping in the handlebar end is done by tightening an M6 screw inside the adapter, whereby the clamping pieces are widened and a stable assembly becomes possible. Then the mirror clamp on the adapter is tightened and the handlebar end indicator is clamped at the same time.

The bar adapter uni disc/cone comes with two clamps for the left and right side of the handlebar. They fit perfectly to our grips mo.grip as well as the push buttons mo.switch basic and mo.switch mini.

They are mounted directly in the handlebar end (22 mm, 7/8 and 1 inch) with a free inside diameter of 12 to 21 mm and a length of 90 mm.

mo.blaze disc by Motogadget – a turn signal for handlebar end installation in a trend-setting design.

The mo.blaze disc is the latest generation of turn signal lights. The characteristic feature of the LED turn signal is the transparent light-emitting disc on a compact aluminium base providing the harmonious finish of the handlebar end.

This is already the third generation of our turn signals using the motogadget TranzLight-Technology® (TLT, patent pending). This progressive approach to development is not limited to the miniaturization of turn signal casings. Furthermore, it creates new lighting concepts directly through a crystal-like plastic body. Only the precision of CAD calculations and state-of-the-art manufacturing processes allow this new design and its performance opportunities.

The luminous flux required for the TranzLight technology is generated by the intensiLED® procedure developed by Motogadget. It consists of three important pillars:

Specifically selected, high output LED with maximum efficiency and 7W total output and a service life of more than 50,000 hours.

IC controlled constant power source with 330 kHz pulses.

Special collimator optics, that precisely bundles the emission light from the LED into the plastic body.

The subtle aluminium casing is used for the secure mount of the plastic body only and includes the electronic control system and high-end LEDs. Traditionally, the casing is machined using CNC technology, available with an anodized black or mirror polish surface and furnished with an elegant finish of laser inscriptions.

The turn signal for handlebar end installation has a very low construction height and, due to the transparent disc, the mo.blaze shows up with a very neutral and subtle look. That's why the mo.blaze is the perfect match to many styles and all types of motorbikes.

Like any other conventional LED turn signal, the turn signal kit can be operated with load resistors or any of our load independent flasher relays (mo.flash, mo.wave, mo.stop, mo.relay+).

The mo.blaze disc has E mark and front turn signal approval.

The price is per EACH turn signal. Always make sure to order a complete set consisting of the left and right side turn signal assembly.

Please note: one package contains 2 adapters.

The bar adapt. BMW M12 disc allows the mounting of all mo.view handlebar end mirrors on BMW handlebars with M12 thread, in combination with the mo.blaze handlebar end indicators, without moving the grips and controls on the handlebars.
It creates a clamping surface for the handlebar end mirror outside the steering tube. Whether for the mo.view blade, mo.view spy, mo.view flight, mo.view cafe, mo.view road, mo.view pace, mo.view cruise or mo.view street.

It is CNC machined from billet aluminum and black anodized.
The installation in the handlebar end is done by screwing the M12 thread into the handlebar. Then the handlebar end mirror is clamped on the adapter. This also clamps the handlebar end indicator in the adapter.

The bar adapt. BMW M12 disc comes with two thread pieces for the left and right side of the handlebar. They fit perfectly to our grips mo.grip.

The mounting is done directly in the thread M12 of the BMW handlebar.

The mo.blaze tens1 from motogadget is one of the smallest turn signals for front and rear in the world.

Its tiny dimensions and reduced design make it almost disappear on the vehicle. As soon as it lights up, it is extremely bright thanks to IntensiLED® Technology and definitely can no longer be overlooked.

At the same time, the additional lateral beam angle ensures the best visibility and safety.

The turn signal has ECE approval as a front and rear direction blinker. The aluminum housing is CNC machined and available in black anodized or mirror polished finish.

The turn signal can be operated like any usual LED flasher with load resistors or all our load-independent flasher relays (mo.flash, mo.wave, mo.stop, mo.relay+).

Benefits

• extremely small aluminum housing
• ECE approval, no registration or similar necessary
• increased visibility and safety due to additional lateral beam angle
• highest luminosity by most modern high power LED technology (IntensiLED®)
• electronic voltage processing by 330kHz clocked, IC controlled constant current source and safe electronic protection
• the mounting thread is standard M8. Therefore no mounting adapter or special heat sink nut necessary

Included

• single turn signal mo.blaze tens1 with thread M8
• nut M8
• 2 push-lock cable connectors
• installation instructions

This sale is for EACH turn signal. Please order two turn signals for use as a pair, or four turn signals for front and rear.

Please note: one package contains 2 adapters

The bar adapter Triumph M6 allows the mounting of all mo.view handlebar end mirrors on Triumph handlebars with M6 thread.

The adapter closes the handlebar end with an aluminum cap. The handlebar end mirrors can be clamped on the handlebar end.

It is CNC machined from billet aluminum and anodized black.
Mounting on the handlebar end is done by screwing the M6 thread into the handlebar.

The bar adapter Triumph M6 is supplied with two threaded pieces for the left and right side of the handlebar.

It is mounted directly in the thread M6 of the Triumph handlebar.