HELMETS ON SALE!

Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE R22.05 motorcycle standards—the European test protocol recognized by leading helmet makers and independent safety labs as the toughest in the world.

Technical Details

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy during frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components

The SeventyFive is a tribute to the stylish icon of the 70’S. The helmet is a play on the design of the Racer model and the name comes from the year when the company was born. The helmet has slotted air vents to increase ventilation and it has 3 snaps to allow for fitment of DMD's snap-on visor. It has a space large enough to accommodate most goggles. This model is also compatible with DMD's new SeventyFive Goggle  and with the DMD Ghost goggles.

TECHNICAL DETAILS

• Carbon kevlar shell
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing then permit to air dry whenever possible to prevent heat damage.

The SeventyFive is a tribute to the stylish icon of the 70’S. The helmet is a play on the design of the Racer model and the name comes from the year when the company was born. The helmet has slotted air vents to increase ventilation and it has 3 snaps to allow for fitment of DMD's snap-on visor. It has a space large enough to accommodate most goggles. This model is also compatible with DMD's new SeventyFive Goggle  and with the DMD Ghost goggles.

TECHNICAL DETAILS

• Carbon kevlar shell
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing then permit to air dry whenever possible to prevent heat damage.

The SeventyFive is a tribute to the stylish icon of the 70’S. The helmet is a play on the design of the Racer model and the name comes from the year when the company was born. The helmet has slotted air vents to increase ventilation and it has 3 snaps to allow for fitment of DMD's snap-on visor. It has a space large enough to accommodate most goggles. This model is also compatible with DMD's new SeventyFive Goggle  and with the DMD Ghost goggles.

The Oro Collection takes the SeventyFive line up and kicks it up a few notches incorporating a carbon kevlar shell, Italian leather trim and an inner lining made of leather and Shalimar. It is the result of the perfect union of the best Italian leather and DMD craftsmen’s skilled hands.

TECHNICAL DETAILS

• Carbon kevlar shell
• Italian leather trim
• Inner lining made of leather and Shalimar, removable and washable.
• Padded chin strap with Double D-ring closure
• ECE Homologation
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing then permit to air dry whenever possible to prevent heat damage.

The SeventyFive is a tribute to the stylish icon of the 70’S. The helmet is a play on the design of the Racer model and the name comes from the year when the company was born. The helmet has slotted air vents to increase ventilation and it has 3 snaps to allow for fitment of DMD's snap-on visor. It has a space large enough to accommodate most goggles. This model is also compatible with DMD's new SeventyFive Goggle  and with the DMD Ghost goggles.

The Oro Collection takes the SeventyFive line up and kicks it up a few notches incorporating a carbon kevlar shell, Italian leather trim and an inner lining made of leather and Shalimar. It is the result of the perfect union of the best Italian leather and DMD craftsmen’s skilled hands.

TECHNICAL DETAILS

• Carbon kevlar shell
• Italian leather trim
• Inner lining made of leather and Shalimar, removable and washable.
• Padded chin strap with Double D-ring closure
• ECE Homologation
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing then permit to air dry whenever possible to prevent heat damage.

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its plush inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet fashionable and stylish with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then permit to air dry whenever possible to prevent heat damage.

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its plush inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet fashionable and stylish with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing;  then permit to air dry whenever possible to prevent heat damage.

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its plush inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet fashionable and stylish with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then permit to air dry whenever possible to prevent heat damage.

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its plush inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet fashionable and stylish with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then permit to air dry whenever possible to prevent heat damage.

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its fabulous inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet fashionable and stylish with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature; never use heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner by hand washing, then permit to air dry whenever possible to prevent heat damage.

SX.100: URBAN MEETS SOUL

Thanks to many hours spent in Aerodynamic studies and wind-tunnel tests the SX.100’s special shape allows a relatively lightweight helmet, with a sporty design that optimizes both stability and soundproofing at high speed.

SPECIFICATIONS

• ATR/PC shell
• One shell size: XS-XXL
• PC Lexan shield with X-SWIFT Quick Release System:  Quick release visor mechanism; makes changing visors extremely simple and quicker than ever (less than 8 seconds) and tool free
• Visor prepared for Pinlock
• Outstanding eye port:  SX.100 eye port is extremely wide and offers an increased feeling of openness inside the helmet, a sense of freedom ideal for all urban conditions. The visor is an optical class 1 anti-scratch and prepared for the use with a Pinlock Fog-Free lens.
• Inner sunvisor
• Micro-metric buckle
• X-MART Dry Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Anti-noise cheek pads
• Removable neck roll
• Chin Wind stopper
• 2 inlet and 2 outlet air-vents (Air Dynamic System)
• Visor ventilation system
• Removable breath guard
• Aerodynamic rim
• Prepared for NEXX Intercom system X-COM
• Weight: 1525 grs +/- 50 grs
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

SX.100R: URBAN MEETS SPORT

LIGHTWEIGHT THERMOPLASTIC HELMET: Thanks to many hours spent in Aerodynamic studies and wind-tunnel tests the SX.100R’s special shape allows a relatively lightweight helmet, with a sporty design that optimizes both stability and soundproofing at high speed. 

The SX.100R is equipped with a double-blade air spoiler at the rear, designed to optimize aerodynamic performance and reduce turbulence at high speeds.

SPECIFICATIONS

• ATR/PC shell
• One shell size: XS-XXL
• PC Lexan shield with X-SWIFT Quick Release System:
• Quick release visor mechanism; makes changing visors extremely simple and quicker than ever (less than 8 seconds) and tool free
• Visor prepared for Pinlock
• Outstanding eye port: SX.100 eye port is extremely wide and offers an increased feeling of openness inside the helmet, a sense of freedom ideal for all urban conditions. The visor is an optical class 1 anti-scratch and prepared for the use with a Pinlock Fog-Free lens.
• Inner sunvisor
• Micro-metric buckle
• X-MART Dry Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Anti-noise cheek pads
• Removable neck roll
• Chin Wind stopper
• 2 inlet and 2 outlet air-vents (Air Dynamic System)
• Visor ventilation system
• Removable breath guard
• Aerodynamic rim
• Rear spoiler for optimized aerodynamic performance
• Prepared for NEXX Intercom system X-COM
• Weight: 1525 grs +/- 50 grs
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell sizes: 2 (XS-M | L-XXL)
• PC Lexan Shield
• Prepared for the use of Raleri Anti-Fog system
• Double-D ring buckle
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin Wind stopper (optional accessory; not included)
• Peak included
• Chin Ventilation

SPECIFICATIONS

• Weight: 1350 grs +/- 50 grs
• Shell sizes: 2 (XS-M | L-XXL)
• Homologation: ECE/22-05, DOT e NBR-7471:2001

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell sizes: 2 (XS-M | L-XXL)
• PC Lexan Shield
• Prepared for the use of Raleri Anti-Fog system
• Double-D ring buckle
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin Wind stopper (optional accessory; not included)
• Peak and visor included
• Chin Ventilation

SPECIFICATIONS

• Weight: 1350 grs +/- 50 grs
• Shell sizes: 2 (XS-M | L-XXL)
• Homologation: ECE/22-05, DOT e NBR-7471:2001

OLD SCHOOL RACING. PREMIUM MATERIALS.

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 2 (XS-M | L-XXL)
• PC Lexan flat shield
• Prepared for the use of Raleri Anti-Fog system
• Double-D ring buckle
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin wind stopper
• Chin Ventilation with adjustable position open/close

SPECIFICATIONS

• Weight: 1350grs +/- 50 grs
• Shell Sizes: 2 (XS-M | L-XXL)
• Homologation: ECE/22-05,DOT e NBR-7471:2001

OLD SCHOOL RACING. PREMIUM MATERIALS.

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 2 (XS-M | L-XXL)
• PC Lexan flat shield
• Prepared for the use of Raleri Anti-Fog system
• Double-D ring buckle
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin wind stopper
• Chin Ventilation with adjustable position open/close

SPECIFICATIONS

• Weight: 1350grs +/- 50 grs
• Shell Sizes: 2 (XS-M | L-XXL)
• Homologation: ECE/22-05,DOT e NBR-7471:2001

OLD SCHOOL RACING. PREMIUM MATERIALS.

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 2 (XS-M | L-XXL)
• PC Lexan flat shield
• Prepared for the use of Raleri Anti-Fog system
• Double-D ring buckle
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin wind stopper
• Chin Ventilation with adjustable position open/close

SPECIFICATIONS

• Weight: 1350grs +/- 50 grs
• Shell Sizes: 2 (XS-M | L-XXL)
• Homologation: ECE/22-05,DOT e NBR-7471:2001

OLD SCHOOL RACING. PREMIUM MATERIALS.

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 2 (XS-M | L-XXL)
• PC Lexan flat shield
• Prepared for the use of Raleri Anti-Fog system
• Double-D ring buckle
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin wind stopper
• Chin Ventilation with adjustable position open/close

SPECIFICATIONS

• Weight: 1350grs +/- 50 grs
• Shell Sizes: 2 (XS-M | L-XXL)
• Homologation: ECE/22-05,DOT e NBR-7471:2001

OLD SCHOOL RACING. PREMIUM MATERIALS.

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 2 (XS-M | L-XXL)
• PC Lexan flat shield
• Prepared for the use of Raleri Anti-Fog system
• Double-D ring buckle
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin wind stopper
• Chin Ventilation with adjustable position open/close

SPECIFICATIONS

• Weight: 1350grs +/- 50 grs
• Shell Sizes: 2 (XS-M | L-XXL)
• Homologation: ECE/22-05,DOT e NBR-7471:2001

OLD SCHOOL RACING. PREMIUM MATERIALS.

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 2 (XS-M | L-XXL)
• PC Lexan flat shield
• Prepared for the use of Raleri Anti-Fog system
• Double-D ring buckle
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin wind stopper
• Chin Ventilation with adjustable position open/close

SPECIFICATIONS

• Weight: 1350grs +/- 50 grs
• Shell Sizes: 2 (XS-M | L-XXL)
• Homologation: ECE/22-05,DOT e NBR-7471:2001

OLD SCHOOL RACING. PREMIUM MATERIALS.

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 2 (XS-M | L-XXL)
• PC Lexan flat shield
• Prepared for the use of Raleri Anti-Fog system
• Double-D ring buckle
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin wind stopper
• Chin Ventilation with adjustable position open/close

SPECIFICATIONS

• Weight: 1350grs +/- 50 grs
• Shell Sizes: 2 (XS-M | L-XXL)
• Homologation: ECE/22-05,DOT e NBR-7471:2001

SPECIFICATIONS

• X-MATRIX Shell (multiaxial fiberglass, 3D organic fibers, special aramid fibers and carbon reinforcement)
• DOT FMVSS 218
• X.MART DRY fabrics
• Removable lining 
• Chin Wind stopper
• Double-D ring buckle
• Rotative Clear Shield, prepared for Anti Fog Lens
• Chin Ventilation
• Ergo Padding System
• Weight: 1200grs + - 50grs

AVAILABLE SIZES

• 2 SHELL SIZES - XS - M  |  L-XXL

X.G200: CLASSY NOSTALGIA MEETS OFF-ROAD PERFORMANCE

SPECIFICATIONS

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 2 (XS-M | L-XXL)
• Double-D ring buckle
• X.MART DRY fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Peak, with 2 adjustable positions
• Chin ventilation
• Top ventilation

AVAILABLE SIZES

• Weight: 1250 grs +/- 50 grs
• Shell Sizes: 2 (XS-M | L-XXL)
• Homologations: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

X.G200: CLASSY NOSTALGIA MEETS OFF-ROAD PERFORMANCE

SPECIFICATIONS

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 2 (XS-M | L-XXL)
• Double-D ring buckle
• X.MART DRY fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Peak, with 2 adjustable positions
• Chin ventilation
• Top ventilation

AVAILABLE SIZES

• Weight: 1250 grs +/- 50 grs
• Shell Sizes: 2 (XS-M | L-XXL)
• Homologations: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

X.G200: CLASSY NOSTALGIA MEETS OFF-ROAD PERFORMANCE

SPECIFICATIONS

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 2 (XS-M | L-XXL)
• Double-D ring buckle
• X.MART DRY fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Peak, with 2 adjustable positions
• Chin ventilation
• Top ventilation

AVAILABLE SIZES

• Weight: 1250 grs +/- 50 grs
• Shell Sizes: 2 (XS-M | L-XXL)
• Homologations: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

X.R3R: MADE TO WIN

Race ready: Uncompromisingly sporty, with an impressive design and the ultimate technology developed from modern motorsports. The new X.R3R is built for the most demanding conditions on the racetrack. A winner.

Feel fast, then be fast: In motorcycle racing, speed is the key and aerodynamics play a critical role – as that extra kilometer per hour could mean the difference between winning and losing. Aerodynamically optimized, the X.R3R lightweight shell design not only reduces air resistance but also optimizes the air mass flow for cooling the interior.

ECE 22-06 HOMOLOGATED

Welcome to a new era of safety.

The X.R3R comes with the new ECE 22-06 homologation which includes new tests performed at higher speed, with more impact locations and improved impact-absorption capacity and additional requirements for features such as retractable chin pieces and visors.

The X.R3R will be also submitted to the FIM Racing Homologation Programme which is required for competing at the international level, including MotoGP – for 2022.

SPECIFICATIONS

• X-MATRIX 2 Shell (multiaxial fiberglass, 3D organic fibers, special aramid fibers and carbon reinforcement)
• 3 Shell Sizes: XXS-XS | S-M | L-XL-XXL
• Double lock safety system:  The double visor lock safety system prevents unexpected sudden opening of the visor shield and can be easily opened while wearing gloves.
• Visor Recoil quick release system:  The Recoil Visor System with its spring-loaded base side plates auto-adjusts and pull the shield back against the dual-lip window beading for a perfect airtight seal.
• Double rubber sealing profile around the visor: the  X.R3R comprehensive soundproofing concept includes Vortex generators in chin area to reduce aerodynamic drag and lift and a double rubber sealing profile around the visor, configured to improve sound insulation.
• Anti-Vibration rubber visor plates - p erfect for helping to reduce noise levels and canceling the transmission of vibrations to the adjacent structures of the visor.
• Visor with recessed cavity for Pinlock
• Panoramic eye port:  Featuring a 225º horizontal field, an 85º vertical visual field, the 2-dimensional shape visor, made of unbreakable PC Lexan, optical class I and anti-scratch, is prepared for the application of tear-offs. Vision can make better & faster decisions on the track. This is the reason why we have developed X-Sensus Vision, our philosophy behind the eye port of all our helmets, which ensures both Focused Vision and Peripheral Vision – with opening angles 15% beyond the standard requirements.
• MotoGP Standard Double D-Ring buckle with X-Lock magnetic button closure
• Removable Chinstrap covers
• Night vision – reflectors
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• Adaptive Crown fit system, removable and washable
• Cheek Pads with adaptive sizes
• Cheek Pads with Emergency Strap System
• Chin wind stopper
• Aerodynamic shell
• Racing spoiler concept
• Rear spoiler extension
• Aerodynamic trim
• Air dynamic system - 6 inlet and 4 outlet air-vents
• Air Cumbs cooling chamber
• Chin speed-flow ventilation system
• Removable breath guard
• Weight: 1500 grs +/- 50 grs
• Homologation: ECE/22-06, DOT FMVSS 218 e NBR-7471:2001

A VERSATILE GO-ANYWHERE DO-ANYTHING OFF-ROAD MODULAR HELMET

The Nexx X.VILIJORD sits comfortably at the premium-level of NEXX’s helmet range. Designed to be versatile and simple, focused on what matters the most to demanding motorcycle Adventure riders. While most motorcycle helmets often cater to either paved or off-road exploration, the X.VILIJORD bridges the gap.

A BREATH OF FRESH AIR

Breathe deeply, naturally and in fullness. The generous Air Dynamic System ventilation, featuring two air intakes and two outlets, allows the constant renewal of fresh air inside the helmet.

KEEP YOUR HEAD WARM ON THOSE COLD DAYS

A specially developed Winter Membrane offers better control over air flow. It can be disabled by folding it to the back part of the inner liner, in case of extreme weather changes.

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 3 (XXS-S | M-L | XL-XXXL)
• Off Road Peak, aerodynamic and light; designed to provide additional direct air intake and reduce buffeting and vibration at high speed
• Adjustable and removable peak extensor for best sunlight protection
• Aerodynamic design, developed to minimize fatigue on long trips, with the mask closed or open
• Winter Membrane to reduce cool air flow on cold days
• Off road chin ventilation designed for optimal use in dust and mud environments
• Morfofit –ergonomic fitting of the cheek pads
• Easy to operate mask button and with involuntarily opening safety mechanism
• 360º Super Locker with double pivot for maximum mask safety when raised
• Special developed rubber sealing around the mask and the shield for optimum Acoustic Isolation
• PC Lexan Shield Clear with Anti-Fog position and central lock
• X-SWIFT Quick Release visor mechanism
• Visor with recessed cavity for Pinlock
• Panoramic Eye Port
• Integrated Sun Visor with Ergonomic Button Mechanism
• Micro-Metric buckle stainless steel
• Night vision – reflectors on the side, front and back of the helmet
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Easy Fit for wearing eye glasses
• Air Dynamic System - 2 inlet and 2 outlet air-vents
• Removable Breath Guard
• NEXX X.COM 2 Intercom system prepared, with “Plug & Play” easy setup
• Removable Action Camera support on top and side
• Doubly certified as both a Full Face and Jet Helmet

SPECIFICATIONS

• Weight: 1800 grs +/- 50 grs
• Sizes: XXS to XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

A VERSATILE GO-ANYWHERE DO-ANYTHING OFF-ROAD MODULAR HELMET

The Nexx X.VILIJORD sits comfortably at the premium-level of NEXX’s helmet range. Designed to be versatile and simple, focused on what matters the most to demanding motorcycle Adventure riders. While most motorcycle helmets often cater to either paved or off-road exploration, the X.VILIJORD bridges the gap.

A BREATH OF FRESH AIR

Breathe deeply, naturally and in fullness. The generous Air Dynamic System ventilation, featuring two air intakes and two outlets, allows the constant renewal of fresh air inside the helmet.

KEEP YOUR HEAD WARM ON THOSE COLD DAYS

A specially developed Winter Membrane offers better control over air flow. It can be disabled by folding it to the back part of the inner liner, in case of extreme weather changes.

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 3 (XXS-S | M-L | XL-XXXL)
• Off Road Peak, aerodynamic and light; designed to provide additional direct air intake and reduce buffeting and vibration at high speed
• Adjustable and removable peak extensor for best sunlight protection
• Aerodynamic design, developed to minimize fatigue on long trips, with the mask closed or open
• Winter Membrane to reduce cool air flow on cold days
• Off road chin ventilation designed for optimal use in dust and mud environments
• Morfofit –ergonomic fitting of the cheek pads
• Easy to operate mask button and with involuntarily opening safety mechanism
• 360º Super Locker with double pivot for maximum mask safety when raised
• Special developed rubber sealing around the mask and the shield for optimum Acoustic Isolation
• PC Lexan Shield Clear with Anti-Fog position and central lock
• X-SWIFT Quick Release visor mechanism
• Visor with recessed cavity for Pinlock
• Panoramic Eye Port
• Integrated Sun Visor with Ergonomic Button Mechanism
• Micro-Metric buckle stainless steel
• Night vision – reflectors on the side, front and back of the helmet
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Easy Fit for wearing eye glasses
• Air Dynamic System - 2 inlet and 2 outlet air-vents
• Removable Breath Guard
• NEXX X.COM 2 Intercom system prepared, with “Plug & Play” easy setup
• Removable Action Camera support on top and side
• Doubly certified as both a Full Face and Jet Helmet

SPECIFICATIONS

• Weight: 1800 grs +/- 50 grs
• Sizes: XXS to XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

A VERSATILE GO-ANYWHERE DO-ANYTHING OFF-ROAD MODULAR HELMET

The Nexx X.VILIJORD sits comfortably at the premium-level of NEXX’s helmet range. Designed to be versatile and simple, focused on what matters the most to demanding motorcycle Adventure riders. While most motorcycle helmets often cater to either paved or off-road exploration, the X.VILIJORD bridges the gap.

A BREATH OF FRESH AIR

Breathe deeply, naturally and in fullness. The generous Air Dynamic System ventilation, featuring two air intakes and two outlets, allows the constant renewal of fresh air inside the helmet.

KEEP YOUR HEAD WARM ON THOSE COLD DAYS

A specially developed Winter Membrane offers better control over air flow. It can be disabled by folding it to the back part of the inner liner, in case of extreme weather changes.

FEATURES

• Carbon Fiber Shell
• Shell Sizes: 3 (XXS-S | M-L | XL-XXXL)
• Off Road Peak, aerodynamic and light; designed to provide additional direct air intake and reduce buffeting and vibration at high speed
• Adjustable and removable peak extensor for best sunlight protection
• Aerodynamic design, developed to minimize fatigue on long trips, with the mask closed or open
• Winter Membrane to reduce cool air flow on cold days
• Off road chin ventilation designed for optimal use in dust and mud environments
• Morfofit – ergonomic fitting of the cheek pads
• Easy to operate mask button and with involuntarily opening safety mechanism
• 360º Super Locker with double pivot for maximum mask safety when raised
• Special developed rubber sealing around the mask and the shield for optimum Acoustic Isolation
• PC Lexan Shield Clear with Anti-Fog position and central lock
• X-SWIFT Quick Release visor mechanism
• Visor with recessed cavity for Pinlock
• Panoramic Eye Port
• Integrated Sun Visor with Ergonomic Button Mechanism
• Micro-Metric buckle stainless steel
• Night vision – reflectors on the side, front and back of the helmet
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Easy Fit for wearing eye glasses
• Air Dynamic System - 2 inlet and 2 outlet air-vents
• Removable Breath Guard
• NEXX X.COM 2 Intercom system prepared, with “Plug & Play” easy setup
• Removable Action Camera support on top and side
• Doubly certified as both a Full Face and Jet Helmet

SPECIFICATIONS

• Weight: 1700 grs +/- 50 grs
• Sizes: XXS to XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

THE ULTIMATE ADVENTURE HELMET. GO WILD.

New ventilation system, offers a new three position upper vent for optimal air intake; the dual-side intakes have a new positioning / angle that favors more fresh air and re-designed to allow better handling and grip with winter gloves.

New Chin ventilation intake draws more fresh air into the mouth area.

The EPS liner has been modified, adding more air channels to allow the extra air to pass over the head and out of the helmet.

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 3 (XXS-S | M-L | XL-XXXL)
• PC Lexan shield clear with Anti-Fog position and Super Lock
• X-Lock Quick Release System
• Visor with recessed cavity for Pinlock (sold separately)
• Panoramic Eye Port
• Inner Sunvisor
• Double D-Ring buckle
• Cheek Pads with emergency strap system V2
• Night vision – reflectors
• Special chin shape to reduce breast injury risk from frontal impacts
• X.MART DRY fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin wind stopper
• Aerodynamic shell & rim
• Air Dynamic System - 3 inlets and 2 outlets air-vents
• Chin ventilation
• NEXX X.COM Intercom system prepared
• Aerodynamic Peak, with adjustable multi-position system
• Peak extensor
• Action camera support top and sides
• Quick Strap System prepared

SPECIFICATIONS

• Weight: 1775 grs +/- 50 grs
• 3 shell sizes: XXS-S; M-L; XL-XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

X.WRL: THE NEW ADV-INSPIRED RALLY HELMET DESIGNED FOR LIMITLESS ADVENTURE

Extremely light, comfortable and with impressive ventilation the new X.WRL (Wild Rally) is the ideal choice for those looking for a helmet for more technical and difficult terrain incursions and that can easily accommodate off-road goggles.

FEATURES

• Lighter than ever with the X-PRO Carbon Shell:  All X.WRL models are molded with the brand new X-PRO CARBON technology, which provides an incredible weight of just 1250 grams. Engineered for elite motorcyclists who demand a light-weight helmet, the new X-PRO carbon with 3K carbon fabrics is 10% lighter than other carbon shells and offers higher stiffness and ultimate strength. Everything you’d expect from one of the most advanced carbon fiber helmet technologies ever.
• Comfort comes first: the New X.WRL comes in 3 aerodynamic shell sizes (XXS-S | M-L | XL-XXXL) and 4 EPS liner size fit options to combine more compact dimensions with outstanding fit and comfort. With high-performance fabrics, refined materials and thoughtful details that will surprise you, the X.WRL interior is designed for total comfort and convenience. All liner parts, including the neck roll are removable and washable to make post-adventure cleanups simple, fast and painless. Plus, soft-touch X-Mart Dry fabrics help you to stay cool – featuring a drying rate twice as fast as normal cotton. Plus, the inner lining is made of soft anti-sweat and anti-allergic fabric.
• Neck Brace fit:  The new shell design helps to reduce weight and makes the fit compatible with the use of a neck brace.
• Two visors included and option to purchase a Transitions smart light visor: a clear visor and an Iridium Red visor for road use are both included in the box and prepared for Pinlock use. The panoramic eye port allows for an excellent field of view. Available as an optional accessory to be purchased separately, Transitions® smart light visors automatically adapt to the ideal hue in any light condition, staying clear at night and smoky when exposed to strong light, providing a safe and comfortable ride, at night or any time of day.
• Integrated Goggle Strap Holder:  One of the unique features of the X.WRL is the Goggle Strap holder integrated in the back of the helmet, allowing a better placement of off-road goggles which remain attached to the helmet when not in use.
• New Peak & Visor Button:  The new visor and peak closing button is designed to withstand the most extreme conditions, with a new shape and swivelling screw-shaped fitting, which can be easily placed or removed with no tools or with the help of a simple coin.
• Double D-Ring buckle with X-LOCK magnetic button:  All the X.WRL range helmets include a double-D Ring with the new X-LOCK magnetic button to facilitate final fastening of the chinstrap.
• Removable Chinstrap covers:  The new removable chinstrap covers that can be removed and washed, with great ease, for cleaning mud or dust after more extreme incursions.
• Cheek Pads with emergency strap system V2:  Built into each cheek pad, the Emergency Strap System V2 allows easier and gentle access to an injured rider’s head by trained medical personnel should the need arise.
• Get quick access to water: The new cheek pads with the X-HIDRO system include smart straps that allow you to attach the tube and the mouthpiece of hydration bladders. Simple to install, the cheek pads with X-HIDRO straps are included as standard in all X.WRL helmets.
• Night vision – reflectors
• Special chin shape to reduce breast injury risk from frontal impacts
• Fantastic ventilation featuring the Brow Ventilation System:  Extra vents in the eyebrow area allow increased airflow directly to the forehead and around the head. The vents have been designed to be easy to operate even with winter gloves. Also included are a chin vent and the Air Dynamic System - 5 inlets and 2 outlet air-vents
• Universal Intercom system prepared
• Aerodynamic Peak, with adjustable multi-position system
• Peak extensor:  For Highway or Off-road use, adjustable in movement and no tools required.
• Top Action camera support:  A removable support can be easily inserted in the top of the peak.

SPECIFICATIONS

• Weight: 1250 grs +/- 50 grs - X-PRO CARBON
• 3 shell sizes: XXS-S; M-L; XL-XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

X.WRL: THE NEW ADV-INSPIRED RALLY HELMET DESIGNED FOR LIMITLESS ADVENTURE

Extremely light, comfortable and with impressive ventilation the new X.WRL (Wild Rally) is the ideal choice for those looking for a helmet for more technical and difficult terrain incursions and that can easily accommodate off-road goggles.

FEATURES

• Lighter than ever with the X-PRO Carbon Shell:  All X.WRL models are molded with the brand new X-PRO CARBON technology, which provides an incredible weight of just 1250 grams. Engineered for elite motorcyclists who demand a light-weight helmet, the new X-PRO carbon with 3K carbon fabrics is 10% lighter than other carbon shells and offers higher stiffness and ultimate strength. Everything you’d expect from one of the most advanced carbon fiber helmet technologies ever.
• Comfort comes first: the New X.WRL comes in 3 aerodynamic shell sizes (XXS-S | M-L | XL-XXXL) and 4 EPS liner size fit options to combine more compact dimensions with outstanding fit and comfort. With high-performance fabrics, refined materials and thoughtful details that will surprise you, the X.WRL interior is designed for total comfort and convenience. All liner parts, including the neck roll are removable and washable to make post-adventure cleanups simple, fast and painless. Plus, soft-touch X-Mart Dry fabrics help you to stay cool – featuring a drying rate twice as fast as normal cotton. Plus, the inner lining is made of soft anti-sweat and anti-allergic fabric.
• Neck Brace fit:  The new shell design helps to reduce weight and makes the fit compatible with the use of a neck brace.
• Two visors included and option to purchase a Transitions smart light visor: a clear visor and an Iridium Red visor for road use are both included in the box and prepared for Pinlock use. The panoramic eye port allows for an excellent field of view. Available as an optional accessory to be purchased separately, Transitions® smart light visors automatically adapt to the ideal hue in any light condition, staying clear at night and smoky when exposed to strong light, providing a safe and comfortable ride, at night or any time of day.
• Integrated Goggle Strap Holder:  One of the unique features of the X.WRL is the Goggle Strap holder integrated in the back of the helmet, allowing a better placement of off-road goggles which remain attached to the helmet when not in use.
• New Peak & Visor Button:  The new visor and peak closing button is designed to withstand the most extreme conditions, with a new shape and swivelling screw-shaped fitting, which can be easily placed or removed with no tools or with the help of a simple coin.
• Double D-Ring buckle with X-LOCK magnetic button:  All the X.WRL range helmets include a double-D Ring with the new X-LOCK magnetic button to facilitate final fastening of the chinstrap.
• Removable Chinstrap covers:  The new removable chinstrap covers that can be removed and washed, with great ease, for cleaning mud or dust after more extreme incursions.
• Cheek Pads with emergency strap system V2:  Built into each cheek pad, the Emergency Strap System V2 allows easier and gentle access to an injured rider’s head by trained medical personnel should the need arise.
• Get quick access to water: The new cheek pads with the X-HIDRO system include smart straps that allow you to attach the tube and the mouthpiece of hydration bladders. Simple to install, the cheek pads with X-HIDRO straps are included as standard in all X.WRL helmets.
• Night vision – reflectors
• Special chin shape to reduce breast injury risk from frontal impacts
• Fantastic ventilation featuring the Brow Ventilation System:  Extra vents in the eyebrow area allow increased airflow directly to the forehead and around the head. The vents have been designed to be easy to operate even with winter gloves. Also included are a chin vent and the Air Dynamic System - 5 inlets and 2 outlet air-vents
• Universal Intercom system prepared
• Aerodynamic Peak, with adjustable multi-position system
• Peak extensor:  For Highway or Off-road use, adjustable in movement and no tools required.
• Top Action camera support:  A removable support can be easily inserted in the top of the peak.

SPECIFICATIONS

• Weight: 1250 grs +/- 50 grs - X-PRO CARBON
• 3 shell sizes: XXS-S; M-L; XL-XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

X.WRL: THE NEW ADV-INSPIRED RALLY HELMET DESIGNED FOR LIMITLESS ADVENTURE

Extremely light, comfortable and with impressive ventilation the new X.WRL (Wild Rally) is the ideal choice for those looking for a helmet for more technical and difficult terrain incursions and that can easily accommodate off-road goggles.

FEATURES

• Lighter than ever with the X-PRO Carbon Shell:  All X.WRL models are molded with the brand new X-PRO CARBON technology, which provides an incredible weight of just 1250 grams. Engineered for elite motorcyclists who demand a light-weight helmet, the new X-PRO carbon with 3K carbon fabrics is 10% lighter than other carbon shells and offers higher stiffness and ultimate strength. Everything you’d expect from one of the most advanced carbon fiber helmet technologies ever.
• Comfort comes first: the New X.WRL comes in 3 aerodynamic shell sizes (XXS-S | M-L | XL-XXXL) and 4 EPS liner size fit options to combine more compact dimensions with outstanding fit and comfort. With high-performance fabrics, refined materials and thoughtful details that will surprise you, the X.WRL interior is designed for total comfort and convenience. All liner parts, including the neck roll are removable and washable to make post-adventure cleanups simple, fast and painless. Plus, soft-touch X-Mart Dry fabrics help you to stay cool – featuring a drying rate twice as fast as normal cotton. Plus, the inner lining is made of soft anti-sweat and anti-allergic fabric.
• Neck Brace fit:  The new shell design helps to reduce weight and makes the fit compatible with the use of a neck brace.
• Two visors included and option to purchase a Transitions smart light visor: a clear visor and an Iridium Red visor for road use are both included in the box and prepared for Pinlock use. The panoramic eye port allows for an excellent field of view. Available as an optional accessory to be purchased separately, Transitions® smart light visors automatically adapt to the ideal hue in any light condition, staying clear at night and smoky when exposed to strong light, providing a safe and comfortable ride, at night or any time of day.
• Integrated Goggle Strap Holder:  One of the unique features of the X.WRL is the Goggle Strap holder integrated in the back of the helmet, allowing a better placement of off-road goggles which remain attached to the helmet when not in use.
• New Peak & Visor Button:  The new visor and peak closing button is designed to withstand the most extreme conditions, with a new shape and swivelling screw-shaped fitting, which can be easily placed or removed with no tools or with the help of a simple coin.
• Double D-Ring buckle with X-LOCK magnetic button:  All the X.WRL range helmets include a double-D Ring with the new X-LOCK magnetic button to facilitate final fastening of the chinstrap.
• Removable Chinstrap covers:  The new removable chinstrap covers that can be removed and washed, with great ease, for cleaning mud or dust after more extreme incursions.
• Cheek Pads with emergency strap system V2:  Built into each cheek pad, the Emergency Strap System V2 allows easier and gentle access to an injured rider’s head by trained medical personnel should the need arise.
• Get quick access to water: The new cheek pads with the X-HIDRO system include smart straps that allow you to attach the tube and the mouthpiece of hydration bladders. Simple to install, the cheek pads with X-HIDRO straps are included as standard in all X.WRL helmets.
• Night vision – reflectors
• Special chin shape to reduce breast injury risk from frontal impacts
• Fantastic ventilation featuring the Brow Ventilation System:  Extra vents in the eyebrow area allow increased airflow directly to the forehead and around the head. The vents have been designed to be easy to operate even with winter gloves. Also included are a chin vent and the Air Dynamic System - 5 inlets and 2 outlet air-vents
• Universal Intercom system prepared
• Aerodynamic Peak, with adjustable multi-position system
• Peak extensor:  For Highway or Off-road use, adjustable in movement and no tools required.
• Top Action camera support:  A removable support can be easily inserted in the top of the peak.

SPECIFICATIONS

• Weight: 1250 grs +/- 50 grs - X-PRO CARBON
• 3 shell sizes: XXS-S; M-L; XL-XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

X.WRL: THE NEW ADV-INSPIRED RALLY HELMET DESIGNED FOR LIMITLESS ADVENTURE

Extremely light, comfortable and with impressive ventilation the new X.WRL (Wild Rally) is the ideal choice for those looking for a helmet for more technical and difficult terrain incursions and that can easily accommodate off-road goggles.

FEATURES

• Lighter than ever with the X-PRO Carbon Shell:  All X.WRL models are molded with the brand new X-PRO CARBON technology, which provides an incredible weight of just 1250 grams. Engineered for elite motorcyclists who demand a light-weight helmet, the new X-PRO carbon with 3K carbon fabrics is 10% lighter than other carbon shells and offers higher stiffness and ultimate strength. Everything you’d expect from one of the most advanced carbon fiber helmet technologies ever.
• Comfort comes first: the New X.WRL comes in 3 aerodynamic shell sizes (XXS-S | M-L | XL-XXXL) and 4 EPS liner size fit options to combine more compact dimensions with outstanding fit and comfort. With high-performance fabrics, refined materials and thoughtful details that will surprise you, the X.WRL interior is designed for total comfort and convenience. All liner parts, including the neck roll are removable and washable to make post-adventure cleanups simple, fast and painless. Plus, soft-touch X-Mart Dry fabrics help you to stay cool – featuring a drying rate twice as fast as normal cotton. Plus, the inner lining is made of soft anti-sweat and anti-allergic fabric.
• Neck Brace fit:  The new shell design helps to reduce weight and makes the fit compatible with the use of a neck brace.
• Two visors included and option to purchase a Transitions smart light visor: a clear visor and an Iridium Red visor for road use are both included in the box and prepared for Pinlock use. The panoramic eye port allows for an excellent field of view. Available as an optional accessory to be purchased separately, Transitions® smart light visors automatically adapt to the ideal hue in any light condition, staying clear at night and smoky when exposed to strong light, providing a safe and comfortable ride, at night or any time of day.
• Integrated Goggle Strap Holder:  One of the unique features of the X.WRL is the Goggle Strap holder integrated in the back of the helmet, allowing a better placement of off-road goggles which remain attached to the helmet when not in use.
• New Peak & Visor Button:  The new visor and peak closing button is designed to withstand the most extreme conditions, with a new shape and swivelling screw-shaped fitting, which can be easily placed or removed with no tools or with the help of a simple coin.
• Double D-Ring buckle with X-LOCK magnetic button:  All the X.WRL range helmets include a double-D Ring with the new X-LOCK magnetic button to facilitate final fastening of the chinstrap.
• Removable Chinstrap covers:  The new removable chinstrap covers that can be removed and washed, with great ease, for cleaning mud or dust after more extreme incursions.
• Cheek Pads with emergency strap system V2:  Built into each cheek pad, the Emergency Strap System V2 allows easier and gentle access to an injured rider’s head by trained medical personnel should the need arise.
• Get quick access to water: The new cheek pads with the X-HIDRO system include smart straps that allow you to attach the tube and the mouthpiece of hydration bladders. Simple to install, the cheek pads with X-HIDRO straps are included as standard in all X.WRL helmets.
• Night vision – reflectors
• Special chin shape to reduce breast injury risk from frontal impacts
• Fantastic ventilation featuring the Brow Ventilation System:  Extra vents in the eyebrow area allow increased airflow directly to the forehead and around the head. The vents have been designed to be easy to operate even with winter gloves. Also included are a chin vent and the Air Dynamic System - 5 inlets and 2 outlet air-vents
• Universal Intercom system prepared
• Aerodynamic Peak, with adjustable multi-position system
• Peak extensor:  For Highway or Off-road use, adjustable in movement and no tools required.
• Top Action camera support:  A removable support can be easily inserted in the top of the peak.

SPECIFICATIONS

• Weight: 1250 grs +/- 50 grs - X-PRO CARBON
• 3 shell sizes: XXS-S; M-L; XL-XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001