MOTORCYCLE PARTS

Union Jack Clutch/Primary Side Engine Cover/Badge suitable for all the 900 and 1200cc Triumph Twins from 2016 to now.

Motone Quality - High Pressure Precision Die Cast and finished in black to match the engine paint. 

Precision fit part - Bolt on - Fit at home 

Fits all the new twins : Street Twin, Street Cup, Street Scrambler, T100, T120, Scrambler 1200, Speed Twin, Bobber, Speedmaster

Motone Quality - HIGH PRESSURE PRECISION DIE CAST

This cover is for the ACG (What was once known as the "Points" Cover on the Vintage Meriden Triumphs) - The smaller of the two round engine covers.  Clutch Side Badges/Covers are also available.  

Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today: Street Twin, Street Cup, Street Scrambler, Scrambler 1200, Bonneville Bobber, T100 , T120, Thruxton, Speedmaster, Speed Twin

MC PART ID: MMU502

MC PART ID: MMU501

MC PART ID: OTS016

Motone Billet Turn Signals

This Sale : 2xPAIRs [4 TURNSIGNALS] - ANODISED BLACK (AMBER BULBS, BOTH AMBER AND CLEAR LENSE INCLUDED)

Each turn signal comes with both a Clear and an Amber lense included in the package so you can assemble it as to your personal preference. 

Turn Signal Body and Housing turned out of billet 6061 aluminium. 

Osram 12v Amber bulbs included in the package.  Lenses 40mm diameter and are e-marked. Thread stem is turned out of 10mm stainless with 30mm of usable length (M10 x 30)

MC PART ID: 2XXNM002B

1. TURN SIGNAL (INDICATORS)
2. BRAKE LIGHT
3. RUNNING LIGHT (TAIL LIGHT)

• ECE R148 - LAB TESTED FULLY COMPLIANT ROAD LEGAL
• CUSTOM PCB 
• FULL METAL JACKET - ALUMINIUM HOUSING
• ORSAM SMD LED
• BRAIDED CABLES TERMINATING IN 3.9MM BULLET CONNECTORS
• WATERPROOF
• RUBBER BOOT CABLE TIDY 
• INPUT: DC 12v

• Indicator Light Power: 1.2W 
• Running Light Power: 0.5W 
• Brake Light Power: 1.2W 
• Indicator Brightness: 77 Cd
• Running Light Brightness: 9 Cd
• Brake Light Brightness: 50 cd
• PMMA LENS (TIR Optical Lense tech)
• SIZE W 18 x H 44 x D 25.5 mm
• MOUNTED ONTO A M8 THREAD 

• RED - BRAKE LIGHT
• YELLOW - INDICATOR
• BROWN - RUNNING LIGHT
• BLACK - EARTH NEUTRAL 

Combine with various Motone brackets and adapters to fit anywhere on your bike: 

• Brackets for front of bike:
• Billet Adapter Brackets mount M8 Indicators such as the PICO direct to stock Triumph Indicator position (2016 and up bikes)
• Clampit Brackets to mount to front fork 41mm (other sizes also coming)
• Boomerang Bracket - fits on the bottom yoke suitable for the Street Twin/Speed Twin 900 
• Brackets for rear of bike:
• V2 Shock Mount Brackets to mount to rear shock
• Under Seat Brackets LC Triumph - Use the bolt holes under the rear of the seat to fit Indicators towards rear of frame - Liquid Cooled Bonneville so 2016 to 2025+)
• Under Seat Brackets AC Triumph - Under seat brackets for the aircooled (2001-2015) Bonnevilles
• Triline Brackets to mount to Rear Shock
• Ajax - Designed specifically for the Triumph Bobber these brackets allow you to fit signals onto the rear of the bike using the airbox bolts
• Number Plate Brackets - Adapter Brackets that allow the lights to be fit direct to your rear number plate bracket without needing to drill any holes etc 

Wiring Adapters

• Please note if you have one of our tail tidies or rear loom adapters they would already terminate in a 3.9mm Bullet so plug and play from there on
• Each Light Unit has 4 Wires that terminate in a standard Japanese spec 3.9mm Bullet - The Red wire is the Brake Light, the Yellow wire is the Running Light, the Brown Wire is the Indicator Light and the Black is the Earth/Neutral
• We have a Wiring Loom adapter for the Triumph Bobber / Scrambler 1200 that can be run directly with these MULTI 3in1 Indicators available here part code DDM016  

MOTONE PICO LED T/S : TURN SIGNAL / INDICATORS

SOLD HERE : PAIR [2 TURN SIGNALS]

• ECE R50 - LAB TESTED FULLY COMPLIANT ROAD LEGAL
• CUSTOM PCB 
• FULL METAL JACKET - ALUMINIUM HOUSING
• ORSAM SMD LED
• BRAIDED CABLES TERMINATING IN 3.9MM BULLET CONNECTORS
• WATERPROOF
• RUBBER BOOT CABLE TIDY 
• PMMA LENS
• SIZE W 18 x H 44 x D 25.5 mm
• MOUNTED ONTO A M8 THREAD 

Combine with various Motone brackets and adapters to fit anywhere on your bike: 

• Brackets for front of bike:
• Billet Adapter Brackets mount M8 Indicators such as the PICO direct to stock Triumph Indicator position (2016 and up bikes)
• Clampit Brackets to mount to front fork 41mm (other sizes also coming)
• Boomerang Bracket - fits on the bottom yoke suitable for the Street Twin/Speed Twin 900 
• Brackets for rear of bike:
• V2 Shock Mount Brackets to mount to rear shock
• Under Seat Brackets LC Triumph - Use the bolt holes under the rear of the seat to fit Indicators towards rear of frame - Liquid Cooled Bonneville so 2016 to 2025+)
• Under Seat Brackets AC Triumph - Under seat brackets for the aircooled (2001-2015) Bonnevilles
• Triline Brackets to mount to Rear Shock
• Ajax - Designed specifically for the Triumph Bobber these brackets allow you to fit signals onto the rear of the bike using the airbox bolts
• Number Plate Brackets - Adapter Brackets that allow the lights to be fit direct to your rear number plate bracket without needing to drill any holes etc 

Wiring Adapters

Please note if you have one of our tail tidies or rear loom adapters they would already terminate in a 3.9mm Bullet so plug and play from there on.

• DDM011: Wiring Adapter to Convert to OE Triumph Wiring Plugs (2016 to 2025+)
• DDM004: Wiring Adapter to Convert to OE Triumph 2001-2015
• DDM014: Wiring Adapter for Royal Enfield 650
• DDM005: Wiring Adapter for Royal Enfield Meteor/Hunter 350

Sold as a pair - these adapters allow Motone and other aftermarket turn signals to be plugged straight into the stock factory loom, no splicing of cables required.

Suitable for use on all the liquid-cooled (LC) Bonnies from 2016 and up:

Street Twin, T100, T120, Bobber, Street Cup, Thruxton S, Thruxton R

Each pair of adapters will work with a pair of turn signals. Therefore, if you're installing four signal lights, order a quantity of two (2) to receive two pairs.

Sold as a pair. 

These are the Ajax the latest edition of our Triline Indicator Brackets specifically designed for the Triumph Bobber

Having seen various adaptations on the road utilizing some of our existing turn signal brackets plus various spacers etc we thought we would design a specific version for the Bobber, especially with our upcoming Icon and Pico turn signals which also come in a 3in1 form (Brake/Running/Turn Signal) 

These brackets fit using the existing air box screws at the rear of the frame and provide a mounting point where you can fit any 8 or 10mm Turn signal or Indicator.

They are also spaced horizontally so that the legal (UK/EU) distance between left and right signals is maintained

We have formed these out of high pressure die-cast aluminum and they come with stainless bolts and fixings 

Sold as a Set of 2 pieces (1 Left and 1 Right sided piece)

Sold as a pair. 

These are the latest brackets we have made allowing you to fit indicators to the rear of your bike using the 2 bolt holes on either side at the top of your frame.

These can be run in various combinations with our parts, depending on the rear mudguard of your bike and which make indicators you have and the length of threads they run

As is we have designed the holes to bolt on using any 

• Indicators with 8mm Threads
• Indicators with 10mm Threads
• OEM Triumph LED Indicators

As well as the above if you have a high and wide rear fender and want to fit with indicators that have particularly long threads, or you simply want to space your indicators out wider apart then you can fit this part in combination with our Billet Indicator Adapters ADT002 (for 8mm Indicators), or ADT003 (for 10mm Indicators)

Fits

• Street Twin
• Street Cup
• Street Scrambler
• T100 LC
• T120
• Thruxton 1200
• Speed Twin

Note if you have another accessory using these holes already it may still be possible to fit them both concurrently - use some washers under the seat latch to raise it up a few mm in this instance

Ladies and Gentlemen these are the Clampits  - SOLD AS A PAIR 

Built out of High Pressure Die Cast Aluminium (we also have a similar version in Aluminum for you Americans) these clamps wrap around your fork - in this case any 41mm fork - and you can bolt on your Indicator - they will work with Indicators that have 8 or 10mm sized threads (so any of the ones we make and most all of the ones out in the world) 

Depending on your bike and the overall look you are going for you may wish to position your indicators at the front or rear side of the fork - these work either way around. 

Other versions for other fork sizes are also in development 

Common Bikes with 41mm Forks Include - Triumph Bonneville, T100, T120, Street Twin, Scrambler 900, Mag Wheel, Royal Enfield Interceptor, new Honda CB350, and many more 

Custom CNC milled from aviation grade billet 6061t aluminium. 

Includes a custom-turned billet nut which slides down over the thread of your turn signal stem.

The clamps are designed primarily to be used with Motone indicators which run on a M8 stainless bolt

Available here Anodised Black PAIR

FITS BOBBER BLACK (47mm fork)

FITS ALL BIKES WITH 47MM FORKS

ALSO INCLUDES M8 SLEEVED SLEEVED BOLTS

Sold as a pair. 

Motone TRILINE Turn Signal / Indicator brackets in a BLACK finish.  Sold as a pair with 2 x M8x30mm stainless mounting bolts

The brackets are designed to mount flush on the top eyelets of the rear shocks.  At the other end of the bracket there is a hole which will take the bolt from your turn signal (suitable for any size 8mm or 10mm thread - both work fine)

They fit many makes of motorcycle - we supply here with a bolt that is suitable for use on a lot of shocks including all of the modern Triumph twins.

FITS ALL YEARS HINKLEY BONNEVILLE T100/SE/SCRAMBLER/THRUXTON/STREET CUP/T120/SPEED TWIN 1200: 2001-Present 

For non Triumph use please note - The supplied bolts have 30mm of thread, the stock bolts on the triumph twins have 20mm, so if you are using on a non-triumph or custom application please measure whatever bolts your shocks are currently using and add an extra 10mm to the length and thats how long bolts you will need. 

MC PART ID: MMU005

Sold as a pair. 

CNC Machined out of Billet Aluminium and Anodised Black, these adapters fit directly onto the stock Indicator Mounts to allow you to fit an aftermarket Indicator with a regular 10mm Thread. The final position angle of your indicator is controlled by a stainless grub screw which locks the Indicator light in place.

This version (ADT002) is for Indicators/Turn Signals with 10mm Threads (Such as Motone Billet Indicators, MC PART ID NXM002B)

We also have an alternative version for Indicators with 8mm threads (e.g. Rizoma, Kellerman) which is part ADT002.

Fitment:

Suitable for Street Twin, T100, T120, Thruxton, Bobber, Street Cup, Street Scrambler, Speed Twin 

These also work with Street Triple and Speed Triple and other modern Triumph motorcycles

Sold as a pair. 

CNC Machined out of Billet Aluminium and Anodised Black, these adapters fit directly onto the stock Indicator Mounts to allow you to fit an aftermarket Indicator with a regular 8mm Thread. The final position angle of your indicator is controlled by a stainless grub screw which locks the Indicator light in place.

This version (ADT002) is for Indicators/Turn Signals with 8mm Threads (Such as Rizoma / Kellermann etc)

We also have an alternative version for Indicators with 10mm threads (e.g. Motone Billet Indicators) which is part ADT003.

Fitment:

Suitable for Street Twin, T100, T120, Thruxton, Bobber, Street Cup, Street Scrambler, Speed Twin 

These also work with Street Triple and Speed Triple and other modern Triumph motorcycles

Sold as a pair. 

New Shock mount 2.0 Indicator brackets will work on many different types, makes, and models of bikes with capability to mount 

• Pretty much Any known Aftermarket Indicator out there  (8 or 10mm Thread no problem)
• Triumph OEM (Factory Original) Type Indicators 

Can be fit on outside or inside of Shock depending on the type of shock you have.

Includes blanking plates if not using the OEM holes.  

Each bracket can be fit on either side of the bike 

Made out of Stainless Steel and Powder Coated in Black

New License Plate Indicator L-Clamp Brackets

L shaped they clip into the slots that you would normally use to Bolt your Number Plate to the Plate Hanger/Bracket (e.g. Motone Round Tail Light Bracket OR Motone GORT Tail Light Bracket)

Indicator brackets work with

• All Aftermarket Indicator out there  (8 or 10mm Thread no problem)
• Triumph OEM (Factory Original) Type Indicators 

Includes blanking plates if not using the OEM holes

Made out of Stainless Steel and Powder Coated in Black

Sold as a pair.

MC PART ID: MSM031

This is the MOTONE SPEED VIPER SEAT MK.II  :

• INJECTION MOLDED BASE
• INJECTION MOLDED HIGH DENSITY POLYEURETHENE FOAM for max comfort
• RIBBED DOUBLE STITCH PATTERN (See Mk.I for Single Stitch)

ONLY FITS SPEED TWIN 1200 (ALL VARIANTS 2019 to NOW, both EUR4 and EUR5 variants)

We have other seats for other bikes including the Speed Twin 900 which has a different subframe.

The Beltane Leather Battery Strap in Brown Suitable for your LC TRIUMPH BOBBER or SPEEDMASTER Motorcycle

Fits all years LC Triumph BOBBER and SPEEDMASTER 1200

Premium Grade Leather - Stitched Back - Brass fittings and Stainless Clip

These are a bolt-on piece and can be fit at home in minutes 

These are the LAMPREY - Precision Cast in Aluminium to match the exact contours on the underside of the stock Triumph BOBBER Seat Base - they also allow the wiring to be nicely hidden so the wires can exit towards the front of the seat

They are designed to work with our PICO or ICON signal lights of the 3in1 Variation (Indicator, Brake, Running Lights) though in fact you can also mount other brand Lights should you wish to - the hole is designed for a M8 Thread

Sold as a Set of 2 pieces (1 Left and 1 Right sided piece)

This version - BRUSHED to match stock seat 

These are the LAMPREY - Precision Cast in Aluminium to match the exact contours on the underside of the stock Triumph BOBBER Seat Base - they also allow the wiring to be nicely hidden so the wires can exit towards the front of the seat

They are designed to work with our PICO or ICON signal lights of the 3in1 Variation (Indicator, Brake, Running Lights) though in fact you can also mount other brand Lights should you wish to - the hole is designed for a M8 Thread

Sold as a Set of 2 pieces (1 Left and 1 Right sided piece)

This version - BLACK

Sold as a pair - these adapters allow Motone and other aftermarket turn signals to be plugged straight into the stock factory loom, no splicing of cables required.

Suitable for use on all the air-cooled (AC) Bonnies from 2001-2016

T100 / Thruxton / Scrambler / SE / Mag Wheel

Alternative version for LC 2016 and up bikes also available here.

Each pair of adapters will work with a pair of turn signals. Therefore, if you're installing four signal lights, order a quantity of two (2) to receive two pairs.