REV'IT! DIRT SERIES

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, waterproof, lightweight, comfortable, active fit off-road.

The evolution of a DIRT Series modern classic, the Component 2 H2O builds upon this pinnacle adventure jacket’s well-received, feature-driven design approach by making the stand-out details even better and adding another few for good measure.

Form and function in fashionable harmony
Inspired by designs used throughout the outdoor segment, it’s very much form and function in fashionable harmony. Not to say it’s a compromise – more the exact opposite. Its strategically matched, abrasion resistant Cordura® ripstop and PWR|Shell stretch ripstop materials give a hard-wearing, durable look to the Component 2 H2O’s actual tactical and lightweight characteristics. With 100% wind and waterproof, laminated hydratex, CE-level 1 SEESMART armor, and an added pouch to upgrade things with a CE-level 2 SEESOFT back protector, the Component 2 H2O pulls out all the stops.

Get your adventure on
With its removable hood, comfort-boosting neoprene collar, and ample ventilation, the Component 2 H2O is very much ready to hit the road. There’s still everything you need to take to the roads less traveled – or just leave the road altogether. Its active fit adds a casual, outdoor lifestyle feel, while the comfortably sizing has been primarily designed to slip over our Proteus protector jacket for when you’re really looking to get your adventure on.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, waterproof, lightweight, comfortable, active fit off-road.

The evolution of a DIRT Series modern classic, the Component 2 H2O builds upon this pinnacle adventure jacket’s well-received, feature-driven design approach by making the stand-out details even better and adding another few for good measure.

Form and function in fashionable harmony
Inspired by designs used throughout the outdoor segment, it’s very much form and function in fashionable harmony. Not to say it’s a compromise – more the exact opposite. Its strategically matched, abrasion resistant Cordura® ripstop and PWR|Shell stretch ripstop materials give a hard-wearing, durable look to the Component 2 H2O’s actual tactical and lightweight characteristics. With 100% wind and waterproof, laminated hydratex, CE-level 1 SEESMART armor, and an added pouch to upgrade things with a CE-level 2 SEESOFT back protector, the Component 2 H2O pulls out all the stops.

Get your adventure on
With its removable hood, comfort-boosting neoprene collar, and ample ventilation, the Component 2 H2O is very much ready to hit the road. There’s still everything you need to take to the roads less traveled – or just leave the road altogether. Its active fit adds a casual, outdoor lifestyle feel, while the comfortably sizing has been primarily designed to slip over our Proteus protector jacket for when you’re really looking to get your adventure on.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Fully functional aesthetics never looked this good. With a design borrowing heavily from the outdoor scene, the CE-certified motorcycle-ready Blackwater 2 H2O smock is all about looking purposeful as much as being purposeful. Inherent to the smock jacket concept, you put it on over your head, which is made easy with the addition of a side-entrance zipper. Keeping the front clean, and fully weatherproof.

Function-focused, fit for purpose
Regardless of the basic, function-focused approach, the Blackwater 2 H2O advances the motorcycle smock jacket concept with laminated, waterproof hydratex material, beefed-up abrasion resistance with Cordura® ripstop, and PWR|Shell stretch ripstop to secure wearing comfort and stretch.

Ready for pure-blooded adventure
Although it’s looks make intentions clear – it’s a pure-blooded off-road adventure jacket – the Blackwater 2 H2O is packed with CE-level 1 SEESMART protective armor at shoulders and elbows, and there’s a pouch ready to add an optional CE-level 2 SEESOFT back protector, assuring you’re safe when adventures take you across tarmac. When it’s time for serious off-road adventuring, the Blackwater 2 H2O is designed to be worn over our Proteus protector jacket. Just remember to take the standard shoulder and elbow armor out first to keep things fitting safely and comfortably

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, waterproof, knee brace-ready, lightweight off-road pants

Take on any adventure in any weather with our CE-certified and waterproof, active fit, over-the-boot Component H2O hard shell pants. The outer shell is made of the rugged abrasion-resistant CORDURA® ripstop fabric laminated with our waterproof hydratex® membrane. PWR|Shell Ripstop stretch is used on the inside of the legs and upper knees for maximum flexibility and comfort. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle. A removable thermal liner will keep the rider comfortable and warm in lower temperatures. Protection is provided by our removable SEESMART™ CE-level 1 protectors at the hips and knees. Furthermore, the knee construction is designed to work with knee braces or our Scram knee protector sock – with the SEESMART™ protectors first removed, of course. For convenience purposes, the upper legs are equipped with cargo pockets as well as waterproof ventilation zippers to cool the rider down in warm weather. To get the right fit every time, we have equipped these pants with a ratchet waist closure, along with a silicon waistband to keep the pants from sliding down. Adjustment tabs on the calves provide plenty of adjustability to complement any type of motorcycle boots. A grip patch will ensure that the rider will not slide off the seat when it is wet or dry. Additionally, the lower legs are equipped with a special gator that goes over the boot to block out water and mud. Ride long and far with the Component H2O pants.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, over-boot, off-road, lightweight, flexible riding pants

Enjoy endless off-road exploration on two wheels with our CE-certified and splash proof, active fit over-the-boot Continent hard shell pants – as part of our DIRT Series collection. On the inside of the legs and upper knees, the Continent has been engineered with the rugged abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch for maximum flexibility and comfort. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle. Protection is provided by our removable SEESMART™ CE-level 1 protectors at the hips and knees. Furthermore, the knee construction is designed to work with knee braces or our Scram knee protectors – with the SEESMART™ protectors first removed, of course. For convenience purposes, the upper legs are equipped with cargo pockets for added storage options, and ventilation zippers to cool the rider down. For the right fit, we’ve included a ratchet waist closure, along with a silicon waistband to keep the pants from sliding down. Additionally, the lower legs are equipped with a special gator that goes over the boot to block out water and mud.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, over-boot, off-road, lightweight, flexible riding pants

Enjoy endless off-road exploration on two wheels with our CE-certified and splash proof, active fit over-the-boot Continent hard shell pants – as part of our DIRT Series collection. On the inside of the legs and upper knees, the Continent has been engineered with the rugged abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch for maximum flexibility and comfort. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle. Protection is provided by our removable SEESMART™ CE-level 1 protectors at the hips and knees. Furthermore, the knee construction is designed to work with knee braces or our Scram knee protectors – with the SEESMART™ protectors first removed, of course. For convenience purposes, the upper legs are equipped with cargo pockets for added storage options, and ventilation zippers to cool the rider down. For the right fit, we’ve included a ratchet waist closure, along with a silicon waistband to keep the pants from sliding down. Additionally, the lower legs are equipped with a special gator that goes over the boot to block out water and mud.

 NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, Windbreaking, softshell, off-road riding jacket with removable sleeves

The Continent WB jacket is a tactical, high-tech, adventure-ready jacket as part of our DIRT Series, but there’s much more to it than meets the eye. Engineered with serious adventure riding in mind, the Continent WB is made to adapt as conditions change.

For when the going gets rough
Designed and certified to be good to go, with SEESMART protection in charge of keeping your elbows and shoulders out of harm’s way and an insert pocket for a SEESOFT back protector, there’s also the possibility of removing the standard protection and slipping the Continent WB jacket over our CE-level 1 and Level 2 certified Proteus protector jacket for when the going gets rough.

Purposeful beyond looks and feel
Similarly, the full-stretch, softshell design looks and feels purposeful, but that’s before unzipping the sleeves for even more riding mobility and ventilation. Because the Continent WB is very much an in-between jacket, the removable sleeves are mated to the shoulders, as a comfortable double layer up top that comes off altogether, turning this mid-range temperature jacket into a full-blown, body-warming off-road riding vest in a matter of moments.
COMFORT FEATURES
Adjustability:
Adjustment drawcord at hem
Adjustment tab at cuffs
Pockets:
Inner pocket
Slit pocket at back
Two slit pockets on front
Features:
Detachable sleeves
Elastic key cord in pocket
CLIMATE FEATURES
Ventilation:
Perforation on upper front
PROTECTION FEATURES
Protection:
Prepared for SEESOFT™ CE-level 2 Insert Back Protector
SEESMART CE-level 1 Elbow Protectors
SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
CORDURA® 750D ripstop
Visibility:
Laminated reflection at upper arms
Laminated reflection on back
Laminated reflective logo on back
CERTIFICATION
This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating. For more details about certification click here.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, waterproof, lightweight, comfortable, active fit off-road jacket

Meet the pinnacle product of REV'IT'S DIRT Series off-road collection: The Component Jacket. It’s the go-to, full-zippered jacket for the off-road rider that needs a CE-certified, lightweight, comfortable, active-fitting, and waterproof garment for all adventures on the trails. The hard shell construction is made from a flexible & waterproof stretch ripstop fabric, along with Cordura® ripstop at the shoulders & arms for increased abrasion resistance. REVIT's open-structured SEESMART™ CE-level 1 protectors found at the shoulders & elbows provide the rider’s necessary armor, plus you can add the REV'IT! Slingshot Back Protector. Alternatively, the CE-level 1 elbow and shoulder protectors can be easily removed if the rider wants to *upgrade their protection by wearing REVIT's body-hugging Proteus protector jacket (with CE-level 1 & 2 protectors) underneath. Ventilation zippers at the lower & upper arms keep riders cool while a detachable hood/storm collar keeps the rider dry off the bike and can be stored in the back pocket when taken off/not in use.

*Make sure the included SEESMART™ armor is removed before upgrading the protection otherwise the ideal fit won’t be achieved & discomfort may ensue.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, waterproof, lightweight, comfortable, active fit off-road jacket

Meet the pinnacle product of REV'IT'S DIRT Series off-road collection: The Component Jacket. It’s the go-to, full-zippered jacket for the off-road rider that needs a CE-certified, lightweight, comfortable, active-fitting, and waterproof garment for all adventures on the trails. The hard shell construction is made from a flexible & waterproof stretch ripstop fabric, along with Cordura® ripstop at the shoulders & arms for increased abrasion resistance. REVIT's open-structured SEESMART™ CE-level 1 protectors found at the shoulders & elbows provide the rider’s necessary armor, plus you can add the REV'IT! Slingshot Back Protector. Alternatively, the CE-level 1 elbow and shoulder protectors can be easily removed if the rider wants to *upgrade their protection by wearing REVIT's body-hugging Proteus protector jacket (with CE-level 1 & 2 protectors) underneath. Ventilation zippers at the lower & upper arms keep riders cool while a detachable hood/storm collar keeps the rider dry off the bike and can be stored in the back pocket when taken off/not in use.

*Make sure the included SEESMART™ armor is removed before upgrading the protection otherwise the ideal fit won’t be achieved & discomfort may ensue.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, In-boot, off-road, lightweight, flexible riding pants

Meet the Peninsula. A purpose-built pair of active fit pants for riders who prefer to wear their gear tucked inside their boots instead of over them – as part of our DIRT Series collection. The CE-certified pants are constructed of highly abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch on the inside legs, lower legs, and upper knees. This allows for maximum movement and comfort. Our flexible, lightweight, and removable SEESMART™ CE-level 1 protectors are featured at the hips and knees. And when the SEESMART™ armour is removed from the knees, the pants can be worn over our CE-level 2 Scram knee protectors. The Peninsula is also patterned to accommodate aftermarket knee braces underneath. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle while optimal fit is ensured by the ratchet waist closure while the silicon waistband will keep the pants from sliding down. In warmer temperatures, the long ventilation zippers can be zipped open to cool down the rider. And in terms of keeping your essentials close by, storage is provided by cargo pockets at the upper legs.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, In-boot, off-road, lightweight, flexible riding pants

Meet the Peninsula. A purpose-built pair of active fit pants for riders who prefer to wear their gear tucked inside their boots instead of over them – as part of our DIRT Series collection. The CE-certified pants are constructed of highly abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch on the inside legs, lower legs, and upper knees. This allows for maximum movement and comfort. Our flexible, lightweight, and removable SEESMART™ CE-level 1 protectors are featured at the hips and knees. And when the SEESMART™ armour is removed from the knees, the pants can be worn over our CE-level 2 Scram knee protectors. The Peninsula is also patterned to accommodate aftermarket knee braces underneath. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle while optimal fit is ensured by the ratchet waist closure while the silicon waistband will keep the pants from sliding down. In warmer temperatures, the long ventilation zippers can be zipped open to cool down the rider. And in terms of keeping your essentials close by, storage is provided by cargo pockets at the upper legs.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, In-boot, off-road, lightweight, flexible riding pants

Meet the Peninsula. A purpose-built pair of active fit pants for riders who prefer to wear their gear tucked inside their boots instead of over them – as part of our DIRT Series collection. The CE-certified pants are constructed of highly abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch on the inside legs, lower legs, and upper knees. This allows for maximum movement and comfort. Our flexible, lightweight, and removable SEESMART™ CE-level 1 protectors are featured at the hips and knees. And when the SEESMART™ armour is removed from the knees, the pants can be worn over our CE-level 2 Scram knee protectors. The Peninsula is also patterned to accommodate aftermarket knee braces underneath. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle while optimal fit is ensured by the ratchet waist closure while the silicon waistband will keep the pants from sliding down. In warmer temperatures, the long ventilation zippers can be zipped open to cool down the rider. And in terms of keeping your essentials close by, storage is provided by cargo pockets at the upper legs.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, waterproof, hooded, lightweight, active fit motorcycle smock

The CE-certified and waterproof Blackwater smock is a fresh face in the realm of off-roading and a member of the DIRT Series collection. With a design inspired by the outdoor world, it offers increased freedom of movement thanks to the functional active fit and the absence of a front zipper. The PWR|Shell stretch ripstop fabric outer shell, alongside the CORDURA® ripstop fabric at the lower arms, allows for a high level of abrasion resistance. REVIT's open-structured SEESMART™ CE-level 1 protectors found at the shoulders & elbows provide the rider’s necessary armor, plus you can add the REV'IT! Slingshot Back Protector. Alternatively, the CE-level 1 elbow and shoulder protectors can be easily removed if the rider wants to *upgrade their protection by wearing REVIT's body-hugging Proteus protector jacket (with CE-level 1 & 2 protectors) underneath.  Stay cool in the warm by opening the ventilation zippers at the upper arm & back. The hood will keep the rider dry when off the bike and can easily be stored in the back pocket when not in use.

*Make sure the included SEESMART™ armor is removed before upgrading the protection otherwise the ideal fit won’t be achieved & discomfort may ensue.

Adjustability

• Adjustment drawcord at hem
• Adjustment tab at cuffs

Pockets

• Waterproof slit pocket at waist

Features

• Adjustment drawcord at hood
• Detachable hood: The zip-on hood can be easily removed from the coat.
• Easy entrance zipper at side seam

Waterproofing

• Hydratex®|3L: A 3-layer construction; the hydratex®|3L membrane has a layer of protective tricot laminated on each side of the membrane. This results in a waterproof and breathable membrane that is also very durable.

Insulation: none

Ventilation

• Zippers on upper arms
• Zipper at upper back

Protection

• SEESMART™ CE-level 1 Elbow Protectors
• SEESMART™ CE-level 1 Shoulder Protectors

Outer shell material

• 3L CORDURA® 750D ripstop: A three-layer CORDURA® with ripstop properties.
• PWR|Shell ripstop stretch: Durability and great abrasion resistance are the defining characteristics of PWR|Shell, thanks to its special ripstop weaving. Thick reinforcement threads are interwoven at regular intervals into the fabric in a crosshatch pattern known as ripstop.

Visibility

• Laminated reflection on back: Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
• Laminated reflection on hood: Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
• Laminated reflective logo on back: This product has a reflective logo at the back of the hand to help riders who are on the road be seen in low light, inclement weather, and at night.

Certification

• This garment is certified according to the FprEN 17092 Standard, published in 2019 and has achieved A rating. For more details about certification click here.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

CE-certified, ventilated, mesh off-road/MX jacket

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

CE-certified, ventilated, mesh off-road/MX jacket

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

PRODUCT DESCRIPTION

Purpose-built, active-fitting pants with loads of mesh ventilation, designed to be tucked into your boots instead of over them, the Territory pants are on the more hardcore end of the DIRT Series spectrum. Made to beat the heat out on the trails, there’s equally very little to them, and a lot going on at the same time.

For when the adventure heat is on
With a construction that has fortifying Cordura® ripstop fabric where needed and grippy, embossed leather at crucial contact points, but other than that the Territory is pretty much entirely made of durable, ballistic PWR|Shell Mesh to keep you cool when the adventure heat is on. Relying on SEESMART hip and knee armor with CE-level 1 approval, you’re taken care of in case of a spill, but plethora of stretch panels throughout not only improve fitting comfort, but also maintain it when you wear the Territory pants with our CE-level 2 Scram knee protectors or aftermarket braces.

Hardcore design meets practical use
Its hardcore, off-road design approach shouldn’t rule out practical use, so we added a gripping silicone to the waist and made sure you have two slit pockets that will always come in handy when you’re out exploring.

COMFORT FEATURES
Adjustability:
Adjustment strap at waist
Pockets:
Slit pocket at hip
Lining:
Mesh
Features:
grip panel at seat
Grip panel at seat
Stretch at calf
Stretch at crotch
Stretch at knees

CLIMATE FEATURES
Ventilation:
Perforation on upper front
Ventilation panels on back
Ventilation panels on upper legs

PROTECTION FEATURES
Protection:
SEESMART CE-level 1 Hip Protectors
SEESMART CE-level 1 Knee Protectors
Outer shell material:
CORDURA® 750D ripstop
Monaco performance cowhide
PWR|Shell mesh
PWR|Shell ripstop stretch
Sure grip
Visibility:
Laminated reflective logo on back
CERTIFICATION
This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating. For more details about certification click here.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, over-boot, off-road, lightweight, flexible riding pants

Enjoy endless off-road exploration on two wheels with our CE-certified and splash proof, active fit over-the-boot Continent hard shell pants – as part of our DIRT Series collection. On the inside of the legs and upper knees, the Continent has been engineered with the rugged abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch for maximum flexibility and comfort. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle. Protection is provided by our removable SEESMART™ CE-level 1 protectors at the hips and knees. Furthermore, the knee construction is designed to work with knee braces or our Scram knee protectors – with the SEESMART™ protectors first removed, of course. For convenience purposes, the upper legs are equipped with cargo pockets for added storage options, and ventilation zippers to cool the rider down. For the right fit, we’ve included a ratchet waist closure, along with a silicon waistband to keep the pants from sliding down. Additionally, the lower legs are equipped with a special gator that goes over the boot to block out water and mud.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight, breathable protector underjacket/jersey jacket

REV'ITs lightweight & breathable Proteus protector jacket functions as an upgrade for the DIRT Series collection, which is worn under the jersey or various jackets we offer. Ideal stretch, ventilation, & armor allow you to ride protected on the trails less travelled. It’s constructed with a combination of densely woven Hicom mesh on the shoulders, a 2-way spandex mesh body, and PWR|Stretch mesh on the inner area of the sleeves. This combination provides optimal support, airflow, and flexibility. Furthermore, it features our award-winning SEEFLEX™ CE-level 2 protection at the shoulders and elbows. It is also equipped with a SEESOFT™ CE-level 2 back protector and SEESOFT™ CE-level 1 protectors at the chest. Thumb loops at the cuffs along with the stretch cuff will make sure the sleeves won’t slide when you’re putting it on or during riding.

Lining: 3D mesh
Features

• Integrated kidney belt
• Stretchable cuff
• Stretch at back
• Stretch at front
• Stretch at inside arms
• Thumb loops
• Outer shell material: Mesh/Stretch mesh

Protection

• 3D mesh protector pockets
• SEEFLEX™ CE-level 2 Elbow Protectors: Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX™ protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX™ protectors easily surpass the new norm without sacrificing wearer comfort.
• SEEFLEX™ CE-level 2 Shoulder Protectors: Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX™ protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX™ protectors easily surpass the new norm without sacrificing wearer comfort.
• SEESOFT™ at ribcage
• SEESOFT™ CE-level 1 Divided Chest Protectors
• SEESOFT™ CE-level 2 Back Protector: The SEESOFT™ CE-Level 2 back protector insert is designed to absorb variable impacts without compromising on comfort, ventilation or freedom of movement.

Certification

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved CU rating. For more details about certification click here.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight. Ventilated. Ready for action. Created using CE-certified fabrics yet inspired by the archetypal MX jersey - but more protective, of course – the Sierra jersey is durable, robust, and perfect for warm-weather adventures. As a part of our DIRT Series collection, we’ve made sure its body is constructed with the strong PWR|Mesh fabric, allowing for optimal ventilation and abrasion resistance. PWR|Stretch ripstop is used on the arms and at the shoulders for increased durability and protection. Because of the Sierra’s active fit, it can easily be worn on top of our body-hugging Proteus protector jacket; which includes CE-level 2 armor at the back, shoulders and elbows and CE-level 1 at the chest. Adding to its already functional form, thumb loops on the cuffs will prevent the sleeves from sliding up when putting it on, and while riding. The chest pocket also features a goggle wiper to help keep the rider’s goggles clean.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight. Ventilated. Ready for action. Created using CE-certified fabrics yet inspired by the archetypal MX jersey - but more protective, of course – the Sierra jersey is durable, robust, and perfect for warm-weather adventures. As a part of our DIRT Series collection, we’ve made sure its body is constructed with the strong PWR|Mesh fabric, allowing for optimal ventilation and abrasion resistance. PWR|Stretch ripstop is used on the arms and at the shoulders for increased durability and protection. Because of the Sierra’s active fit, it can easily be worn on top of our body-hugging Proteus protector jacket; which includes CE-level 2 armor at the back, shoulders and elbows and CE-level 1 at the chest. Adding to its already functional form, thumb loops on the cuffs will prevent the sleeves from sliding up when putting it on, and while riding. The chest pocket also features a goggle wiper to help keep the rider’s goggles clean.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

The right line of defence is needed to protect a rider from the elements, allowing them to keep moving forward despite what the weather is doing. We have the ideal solution for off-road riders: The Barrier rain smock. As part of our DIRT Series collection, the Barrier blocks rain, wind, and mud to keep those wearing it dry and comfortable. Furthermore, the lightweight Hydratex®|Lite rain smock is fully waterproof thanks to the PU-coated ripstop fabric. But the Barrier’s versatility doesn’t stop there. On days where weather patterns fluctuate frequently, this active-fitting smock can easily be taken off or put on without the removal of your helmet thanks to its extra-long zipper. When packing it away, store it in the included compact bag that comes with the jacket. It’s as easy as that.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight. Ventilated. Ready for action. Created using CE-certified fabrics yet inspired by the archetypal MX jersey - but more protective, of course – the Sierra jersey is durable, robust, and perfect for warm-weather adventures. As a part of our DIRT Series collection, we’ve made sure its body is constructed with the strong PWR|Mesh fabric, allowing for optimal ventilation and abrasion resistance. PWR|Stretch ripstop is used on the arms and at the shoulders for increased durability and protection. Because of the Sierra’s active fit, it can easily be worn on top of our body-hugging Proteus protector jacket; which includes CE-level 2 armor at the back, shoulders and elbows and CE-level 1 at the chest. Adding to its already functional form, thumb loops on the cuffs will prevent the sleeves from sliding up when putting it on, and while riding. The chest pocket also features a goggle wiper to help keep the rider’s goggles clean.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

 Ventilated leather gloves for tactile summer touring

The Offtrack 2 gloves live for the summer and love the breeze as the season varies. Primed for hot, humid weather, these gloves offer extreme levels of ventilation with a lightweight feel. Engineered for versatility, even the knuckle protectors are dual purpose: to defend, and guide air into the body of the glove – everything you need to get into your flow. Strength through stretch In the summer, it’s your gloves that take the heat, so a mix of tactile materials ensure a ventilated construction that’s strong and snug in fit without being stifling thanks to PWR|Shell – a 500-denier polyester stretch renowned for its flexible, durable properties – around each finger, and TPU jacquard knit at the knuckles and cuffs – a knit that naturally breathes when you flex your fingers. Make some memories When adventure takes you off the beaten track, you know you’re in for a ride you won’t forget. The Offtrack 2 are with you all the way – plush, impact-absorbing memory foam is stitched into fingers, thumbs, and palms, it’s even under the polyurethane-injected knuckle protectors. Plus, when your hands are still buzzing near the end of a gnarly trail, a pull tab at the cuffs will let the air out as you finish your ride.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

 Ventilated leather gloves for tactile summer touring

The Offtrack 2 gloves live for the summer and love the breeze as the season varies. Primed for hot, humid weather, these gloves offer extreme levels of ventilation with a lightweight feel. Engineered for versatility, even the knuckle protectors are dual purpose: to defend, and guide air into the body of the glove – everything you need to get into your flow. Strength through stretch In the summer, it’s your gloves that take the heat, so a mix of tactile materials ensure a ventilated construction that’s strong and snug in fit without being stifling thanks to PWR|Shell – a 500-denier polyester stretch renowned for its flexible, durable properties – around each finger, and TPU jacquard knit at the knuckles and cuffs – a knit that naturally breathes when you flex your fingers. Make some memories When adventure takes you off the beaten track, you know you’re in for a ride you won’t forget. The Offtrack 2 are with you all the way – plush, impact-absorbing memory foam is stitched into fingers, thumbs, and palms, it’s even under the polyurethane-injected knuckle protectors. Plus, when your hands are still buzzing near the end of a gnarly trail, a pull tab at the cuffs will let the air out as you finish your ride.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, leather/textile mix, ventilated off-road gloves

The Caliber gloves (as part of the DIRT Series collection) feel perfectly at home on or off-road. Why? Because this snug-fitting pair of hand protectors combine the best of both leather and mesh. In order to keep your hands safe, these CE-certified gloves incorporate PWR|Shield fabric at the palm for maximum abrasion resistance. The top of the gloves are constructed with well-ventilated PWR|Stretch mesh and flexible TPR protection is found on the fingers and knuckles. This combination – along with stretch in all the right places - provides optimal freedom of movement and the armor necessary to keep your hands safe whether riding on the asphalt or exploring off the beaten path. Additionally, the comfortable neoprene cuff will keep dust and water out of the gloves.

Adjustability

• Stretch at fingers
• Stretch at thumb
• Stretch fabric on back of hand

Closure

• Hook-and-loop closure
• Wrist strap

Lining

• Tri-fleece liner: This polyester tricot fabric is used for glove lining, and brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp.

Features

• Connect Finger Tip: Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
• Grip patch at palm: A grip patch is made with a texturized pattern to deliver a superb grip performance.
• Outside stitching: The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.
• Pull tab: Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
• Regular cuff

• Ventilation: Ventilation holes

Protection

• Injected ventilated flex knuckle: This knuckle protection is injected in the upper material which makes it very flexible and abrasion resistant. Due to its structure it ventilates very well while keeping you safe.
• Outseam stitching by Guterman: Marketing calls it PWR yarn
• PWR|Shield at palm: PWR|Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance levels. This product is equipped with PWR|Shield at the palm.
• Temperfoam® knuckle
• Temperfoam® palm slider
• Temperfoam® thumb knuckle
• TPR finger knuckles

Outer shell material

• Connect finger tip fabric: Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
• Corduroy
• Goatskin: Tanned leather made from goatskin is considered extremely durable, and is often used for gloves and other products that require a soft hide.
• Neoprene: Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
• PWR|Stretch mesh

Certification

• These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating. For more details about certification click here.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

The Slingshot back protector is a lightweight and comfortable protection upgrade that completely covers the back of the rider and offers the highest level of armor. It features our flexible and well-ventilated SEESOFT™ CE-level 2 RV protector which performs consistently in hot or cold conditions. The Slingshot is constructed with a combination of Hicom mesh on the outside and a highly breathable 3D mesh on the inside, preventing a build-up of perspiration on the rider’s back. In order to keep the casing/harness that holds the SEESOFT™ RV protector in place fresh and clean, simply remove the SEESOFT™ protector and wash it by following the wash and care instructions. To give riders the perfect fit, the Slingshot can be adjusted at the hips and at the shoulders, ensuring the right parts remain shielded in the event of an unfortunate mishap. Furthermore, a connection strap between the shoulder straps makes sure that the protector stays in place and doesn’t shift during active riding.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

The highest level of knee protection we provide is through our Scram knee protector socks. What makes them unique is that they feature our well-ventilated and award-winning SEEFLEX™ CE-level 2 protectors. The breathable and lightweight mesh protector sock contains our long RV12 SEEFLEX™ armor that covers both the knee and the upper part of the shin while extending into the boot of the rider leaving no part of the lower leg unprotected - when worn in conjunction with taller boots. One adjustment strap can be found above the knee and one at the calf, to ensure a perfect and comfortable fit. Both our Continent and Peninsula pants – as part of our DIRT Series collection - have a knee construction designed to work with our Scram knee protectors.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, short-cuffed, lightweight, ventilated off-road/MX gloves

Take the short-cuffed, DIRT Series, Massif gloves out with you on your next off-road adventure and enjoy the comfort and freedom of this pair snug-fitting hand protection. Ideal for warmer weather, the rider’s hands remain cool thanks to a constant flow of cool air streaming through the PWR|Stretch mesh material on the upper side of the gloves. These CE-certified and well-ventilated gloves are also equipped with a neoprene cuff; making sure that no sand or water will enter during a ride on the trails. In the armor department, the Massif gloves have flexible TPR knuckle protector shields the knuckles and fingers. Giving riders the grip they’re after comes from the included Clarino fabric, which ensures a strong hold on the handlebars.

Adjustability

• Stretch at fingers
• Stretch at thumb
• Stretch fabric on back of hand

Closure

• Hook-and-loop closure
• Wrist strap

Lining:No liner

Features

• Grip patch at the palm
• A grip patch is made with a texturized pattern to deliver a superb grip performance.
• Pull tab: fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
• Short cuff

Protection

• EVA foam palm slider
• No knuckle
• PWR|Shield at palm: PWR|Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance levels.
• Temperfoam® thumb knuckle

Outer shell material

• Clarino®
• Neoprene: Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
• PWR|Stretch mesh

CERTIFICATION

• These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 rating.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, short-cuffed, lightweight, ventilated off-road/MX gloves

Take the short-cuffed, DIRT Series, Massif gloves out with you on your next off-road adventure and enjoy the comfort and freedom of this pair snug-fitting hand protection. Ideal for warmer weather, the rider’s hands remain cool thanks to a constant flow of cool air streaming through the PWR|Stretch mesh material on the upper side of the gloves. These CE-certified and well-ventilated gloves are also equipped with a neoprene cuff; making sure that no sand or water will enter during a ride on the trails. In the armor department, the Massif gloves have flexible TPR knuckle protector shields the knuckles and fingers. Giving riders the grip they’re after comes from the included Clarino fabric, which ensures a strong hold on the handlebars.

Adjustability

• Stretch at fingers
• Stretch at thumb
• Stretch fabric on back of hand

Closure

• Hook-and-loop closure
• Wrist strap

Lining:No liner

Features

• Grip patch at the palm
• A grip patch is made with a texturized pattern to deliver a superb grip performance.
• Pull tab: fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
• Short cuff

Protection

• EVA foam palm slider
• No knuckle
• PWR|Shield at palm: PWR|Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance levels.
• Temperfoam® thumb knuckle

Outer shell material

• Clarino®
• Neoprene: Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
• PWR|Stretch mesh

CERTIFICATION

• These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 rating.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, short-cuffed, lightweight, ventilated off-road/MX gloves

Take the short-cuffed, DIRT Series, Massif gloves out with you on your next off-road adventure and enjoy the comfort and freedom of this pair snug-fitting hand protection. Ideal for warmer weather, the rider’s hands remain cool thanks to a constant flow of cool air streaming through the PWR|Stretch mesh material on the upper side of the gloves. These CE-certified and well-ventilated gloves are also equipped with a neoprene cuff; making sure that no sand or water will enter during a ride on the trails. In the armor department, the Massif gloves have flexible TPR knuckle protector shields the knuckles and fingers. Giving riders the grip they’re after comes from the included Clarino fabric, which ensures a strong hold on the handlebars.

Adjustability

• Stretch at fingers
• Stretch at thumb
• Stretch fabric on back of hand

Closure

• Hook-and-loop closure
• Wrist strap

Lining:No liner

Features

• Grip patch at the palm
• A grip patch is made with a texturized pattern to deliver a superb grip performance.
• Pull tab: fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
• Short cuff

Protection

• EVA foam palm slider
• No knuckle
• PWR|Shield at palm: PWR|Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance levels.
• Temperfoam® thumb knuckle

Outer shell material

• Clarino®
• Neoprene: Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
• PWR|Stretch mesh

CERTIFICATION

• These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 rating.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, short-cuffed, lightweight, ventilated off-road/MX gloves

Take the short-cuffed, DIRT Series, Massif gloves out with you on your next off-road adventure and enjoy the comfort and freedom of this pair snug-fitting hand protection. Ideal for warmer weather, the rider’s hands remain cool thanks to a constant flow of cool air streaming through the PWR|Stretch mesh material on the upper side of the gloves. These CE-certified and well-ventilated gloves are also equipped with a neoprene cuff; making sure that no sand or water will enter during a ride on the trails. In the armor department, the Massif gloves have flexible TPR knuckle protector shields the knuckles and fingers. Giving riders the grip they’re after comes from the included Clarino fabric, which ensures a strong hold on the handlebars.

Adjustability

• Stretch at fingers
• Stretch at thumb
• Stretch fabric on back of hand

Closure

• Hook-and-loop closure
• Wrist strap

Lining:No liner

Features

• Grip patch at the palm
• A grip patch is made with a texturized pattern to deliver a superb grip performance.
• Pull tab: fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
• Short cuff

Protection

• EVA foam palm slider
• No knuckle
• PWR|Shield at palm: PWR|Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance levels.
• Temperfoam® thumb knuckle

Outer shell material

• Clarino®
• Neoprene: Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
• PWR|Stretch mesh

CERTIFICATION

• These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 rating.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, short-cuffed, lightweight, ventilated off-road/MX gloves

Take the short-cuffed, DIRT Series, Massif gloves out with you on your next off-road adventure and enjoy the comfort and freedom of this pair snug-fitting hand protection. Ideal for warmer weather, the rider’s hands remain cool thanks to a constant flow of cool air streaming through the PWR|Stretch mesh material on the upper side of the gloves. These CE-certified and well-ventilated gloves are also equipped with a neoprene cuff; making sure that no sand or water will enter during a ride on the trails. In the armor department, the Massif gloves have flexible TPR knuckle protector shields the knuckles and fingers. Giving riders the grip they’re after comes from the included Clarino fabric, which ensures a strong hold on the handlebars.

Adjustability

• Stretch at fingers
• Stretch at thumb
• Stretch fabric on back of hand

Closure

• Hook-and-loop closure
• Wrist strap

Lining:No liner

Features

• Grip patch at the palm
• A grip patch is made with a texturized pattern to deliver a superb grip performance.
• Pull tab: fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
• Short cuff

Protection

• EVA foam palm slider
• No knuckle
• PWR|Shield at palm: PWR|Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance levels.
• Temperfoam® thumb knuckle

Outer shell material

• Clarino®
• Neoprene: Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
• PWR|Stretch mesh

CERTIFICATION

• These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 rating.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

COMFORT FEATURES

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.