You may also like
REV'IT! SEESOFT RV BACK PROTECTOR
Regular price
$69.99
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
The SEESOFT™ CE-Level 2 back protector insert is designed to absorb variable impacts without compromising on comfort, ventilation or freedom of movement. The highly impact-resistant blend of Nitrille and Polynorbornene rubber results in a memory foam that is multi-impact rated and CE certified to the highest level (EN 1621-2:2003 - level 2).
In the case of severe angular impact, the individual Memory foam layers will shift relative to one another, resulting in impact dispersion over a larger effective surface area, and therefore minimizing the energy that is transmitted to the spine and back.
By applying a multiple-layer concept, REV’IT! has developed a flexible back protector insert that performs consistently in all conditions.
Use the chart below to determine which size back protector you need for your jacket.
Size 03 - Compatible Jackets:
- Textile jackets size XS
- Ladies' textile jackets sizes 34-36
- Ladies' leather jackets sizes 34-44
- Men's leather jackets sizes 46-48
Size 04 - Compatible Jackets:
- Textile jackets sizes S-M
- Ladies' textile jackets sizes 38-44
- Ladies' leather jackets sizes 46-48
- Men's leather jackets sizes 50-54
Size 05 - Compatible Jackets:
- Textile jackets sizes L-XXL
- Ladies' textile jackets sizes 46-48
- Men's leather jackets sizes 56-58
Size 06 - Compatible Jackets:
- Textile jackets size 3XL (XYL) - 6XL
- Men's leather jackets sizes 60-62
REV'IT! SEESOFT AIR BACK PROTECTOR
Regular price
$84.99
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Extra-ventilated, CE-level 2 back protector for additional rider protection.
The SEESOFT Air is our extra ventilated CE-level 2 back protector insert that is designed to absorb variable impacts without compromising comfort, ventilation, or freedom of movement. By increasing the number and the frequency ventilation holes (there are more holes and they are bigger!) in the back protector insert, body heat and evaporated perspiration can easily escape, helping the rider cool down quicker or to keep things dry when riding in higher temperatures.
The highly impact-resistant blend of Nitrile and Polynorbornene rubber results in a memory foam that is multi-impact rated and CE certified to the highest level. In the case of severe angular impact, the individual memory foam layers will shift relative to one another, resulting in impact dispersion over a larger effective surface area, and therefore minimizing the energy that is transmitted to the spine and back. By applying a multiple-layer concept, REV’IT! has developed a flexible back protector insert that performs consistently in all conditions.
Use the chart below to determine which size back protector you need for your jacket.
Size 03 - Compatible Jackets:
- Textile jackets size XS
- Ladies' textile jackets sizes 34-36
- Ladies' leather jackets sizes 34-44
- Men's leather jackets sizes 46-48
Size 04 - Compatible Jackets:
- Textile jackets sizes S-M
- Ladies' textile jackets sizes 38-44
- Ladies' leather jackets sizes 46-48
- Men's leather jackets sizes 50-54
Size 05 - Compatible Jackets:
- Textile jackets sizes L-XXL
- Ladies' textile jackets sizes 46-48
- Men's leather jackets sizes 56-58
Size 06 - Compatible Jackets:
- Textile jackets size 3XL (XYL) - 6XL
- Men's leather jackets sizes 60-62
REV'IT! CALIBER GLOVES-DARK NAVY
Regular price
$139.99
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
DIRT Series, leather/textile mix, ventilated off-road gloves
The Caliber gloves (as part of the DIRT Series collection) feel perfectly at home on or off-road. Why? Because this snug-fitting pair of hand protectors combine the best of both leather and mesh. In order to keep your hands safe, these CE-certified gloves incorporate PWR|Shield fabric at the palm for maximum abrasion resistance. The top of the gloves are constructed with well-ventilated PWR|Stretch mesh and flexible TPR protection is found on the fingers and knuckles. This combination – along with stretch in all the right places - provides optimal freedom of movement and the armor necessary to keep your hands safe whether riding on the asphalt or exploring off the beaten path. Additionally, the comfortable neoprene cuff will keep dust and water out of the gloves.
Adjustability
- Stretch at fingers
- Stretch at thumb
- Stretch fabric on back of hand
Closure
- Hook-and-loop closure
- Wrist strap
Lining
- Tri-fleece liner: This polyester tricot fabric is used for glove lining, and brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp.
Features
- Connect Finger Tip: Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
- Grip patch at palm: A grip patch is made with a texturized pattern to deliver a superb grip performance.
- Outside stitching: The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.
- Pull tab: Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
- Regular cuff
-
Ventilation: Ventilation holes
Protection
- Injected ventilated flex knuckle: This knuckle protection is injected in the upper material which makes it very flexible and abrasion resistant. Due to its structure it ventilates very well while keeping you safe.
- Outseam stitching by Guterman: Marketing calls it PWR yarn
- PWR|Shield at palm: PWR|Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance levels. This product is equipped with PWR|Shield at the palm.
- Temperfoam® knuckle
- Temperfoam® palm slider
- Temperfoam® thumb knuckle
- TPR finger knuckles
Outer shell material
- Connect finger tip fabric: Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
- Corduroy
- Goatskin: Tanned leather made from goatskin is considered extremely durable, and is often used for gloves and other products that require a soft hide.
- Neoprene: Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
- PWR|Stretch mesh
Certification
- These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating. For more details about certification click here.
REV'IT! LOMBARD 3 RF (REGULAR FIT) JEANS - DARK BLUE USED
Regular price
$319.99
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Protective, everyday, Regular Fit jeans that echo your fashion sense.
We updated the level of stretch in the Lombard 3 RF motorcycle jeans to preserve the high level of comfort you experience when you wear them. The protection is there, but it will remain virtually unnoticed when you’re riding, regardless of your riding position.
The stretch ensures that the jeans don’t wrinkle when you get off. These features make the Lombard 3 your ideal partner on a day that you’re riding, but also when you want to look like you’re not wearing motorcycle gear off your bike.
A blue or black wash is available. Regardless of the hue, riders can’t lose! They can be worn with almost everything. The included knee protector pockets are adjustable to two different heights, in order to have your armor at the correct place regardless of your leg length.
Dress them up, or dress them down. The Lombard 3 RF motorcycle jeans are a perfect everyday pair of riding denim for the versatile urbanite.
