Cleaning & Maintenance

Muc-Off Foam Fresh is a highly effective, easy to use foam cleaner which is ideal for helmet liners or any soft material which comes into contact with the rider. Foam Fresh has an instant foaming action, which gently agitates dirt and grime away from the surface leaving a fresh Citric Burst fragrance. Even the cleanest looking riding gear benefits from this uniquely formulated product. It's awesome for use on pads, gloves, shoes, liners and body armour.

FEATURES

• Highly effective, easy to use foam cleaner which is ideal for helmet liners or any soft material which comes into contact with the rider
• Foam Fresh has an instant foaming action, which gently agitates dirt and grime away from the surface leaving a fresh Citric Burst fragrance
• Even the cleanest looking riding gear benefits from this uniquely formulated product
• Also for use on pads, gloves, shoes, liners and body armor
• Available in 400mL aerosol cans

Got a load of grime, mud or oil build up on your machine’s chain and sprockets? Then reach for our Powersports Drivetrain Cleaner! This product will make light work of the toughest of residue from all drivetrain areas, thanks to its fast and effective biodegradable formula. So there’s no need to worry next time you’re out riding on a muddy or wet day, as we’ve got you covered.

FEATURES

• Biodegradable*
• Can be used on all motorcycles, quads, ATVs and UTVs
• Suitable for standard O, X, Z ring chains
• Water-soluble formula
• Fast and effective grease cutting formula
• Removes all chain oil and wax residue from drivetrain and swingarm
• Safely eliminates drive chain contaminants
• Ideal for use with chain cleaning brushes and chain cleaning devices
• Trigger spray included for easy application
• Deep cleans all drive chain areas in seconds
• Safe on metal components, hard plastic, rubber and seals

*Only contents are readily biodegradable.

PLEASE NOTE: Not recommended for non-factory finishes. For best results always test an inconspicuous area before use. Use with caution on painted surfaces. Do not leave on carbon fibre for longer than instructed. Always ensure parts are fully cooled before using. Store in a cool dry place.

DANGER:  Keep  out  of  reach  of  children.  May  be  fatal  if  swallowed  and  enters  airways.  Causes  skin  irritation.  Causes serious eye irritation. Wear protective gloves/eye protection.  IF  SWALLOWED:  Immediately  call  a  POISON  CENTER/doctor.  IF  IN  EYES:  Rinse  cautiously  with  water  for  several  minutes.  Remove  contact  lenses,  if  present  and easy to do. Continue rinsing. Do NOT induce vomiting. IF ON SKIN: Wash with plenty of water/soap. If eye irritation persists: Get medical advice/attention.

Featuring all five Muc-Off brushes in a handy storage bag:

Our Soft Washing Brush with sintered bristle compound is designed to clean your frame and components while caring for delicate finishes. It’s all new design features a tough, impact resistant handle that won't slip in extreme conditions, an oversized head for fast cleaning of large areas and rubberised impact zones for maximum protection.

Our Detailing Brush is ideal for reaching hard-to-shift dirt on sprockets, hubs and other tight areas such as suspension mounts or fork crowns. It’s new design features a tough, impact resistant handle that won't slip in extreme conditions, durable nylon bristles and rubberized impact zones for maximum protection on delicate finishes.

Our Claw Brush features high quality construction with triple brush heads with tough nylon bristles and an integral scraper for mud de-clogging. It’s ideal for chain, cassette and sprockets, and it’s even 10-speed compatible.

Our Wheel & Component Brush is shaped and contoured specifically to clean rims and spokes with ease. Its unique design features an impact-resistant, dual density handle and durable nylon bristles.

Our Two Prong Brush is ideal for reaching hard-to-shift dirt on spokes, discs, shocks, cranks, linkages and pedals. It’s design features a tough, impact resistant handle that won't slip in extreme conditions and durable nylon bristles. The twin brush heads can be altered and repositioned to reach the tightest of areas.

NB: To maintain performance of all brushes avoid use with boiling water and on hot parts. We recommend using warm water and allowing all hot parts to cool before use.

FEATURES

• Sintered bristle compounds for safe cleaning
• Rubberised impact zones for maximum protection
• Nylon bristles for durability
• Contains Two Prong, Detailing, Soft Washing, Claw and Wheel & Component brushes

WHAT'S INCLUDED?

• Soft Washing Brush
• Detailing Brush
• Claw Brush
• Wheel & Component Brush
• Two Prong Brush

Foam Fresh, Visor Cleaner, Premium Anti-Fog Treatment, Microfibre Cloth and Microfibre Detailing Cloth - all the essentials a rider needs to keep their helmet in top condition throughout the season.

Foam Fresh gently agitates dirt and grime away from the inside of your helmet, whilst our Visor Cleaner makes quick work of dirt, dust, grime, snow, sweat or just about any residue left on your goggles, helmet, or eyewear.

All of this is made effortless with our Premium Microfibre Polishing Cloth, utilising the amazing split-fibre technology that vastly increases surface area absorbency.

Finally, our Anti-Fog Treatment means you won’t be left in a haze helping to give you clear vision even under the toughest riding conditions.

FEATURES

Foam Fresh

• Ideal for helmet liners and soft material
• Instant foaming action
• Agitates dirt and grime away from the surface
• Citric Burst fragrance
• For use on pads, gloves, shoes, liners and body armour

Helmet, Visor & Goggle Cleaner

• Formulated using de-ionised water
• pH neutral formula as recommended by helmet manufacturers
• Free from solvents and harmful chemicals
• 100% biodegradable
• Ideal for motorcycle goggles 
• Ideal for cycling glasses and goggles 
• Ideal for snowboard and ski goggles

Microfibre Cloth

• Designed for delicate finishes
• Premium quality microfibre
• Ideal size for carrying around
• Machine washable

Anti-Fog Treatment

• Intensive anti-mist formula
• Advanced moisture absorption
• Lasts up to 5 days
• Safe on all plastics and glass
• Ideal for mx and ski goggles, Snowboard goggles, helmet visors, glasses & car mirrors

WHAT'S INCLUDED?

Silicon Shine not only leaves your bike looking factory fresh, but it also acts as an amazing friction reducer for suspension parts and reduces dirt adhesion. Spray it onto your fork stanchions and rear shocks to reduce resistance for a silky smooth, World Cup performance.

FEATURES

• Protects and leaves a sparkling shine on metal, plastic & rubber parts.
• Reduces friction on fork stanchions and rear shocks
• Silicon formula prevents grime build up on treated surfaces
• Cuts down on future cleaning and maintenance

Don’t let your bottom end get wet with the new Muc-Off Exhaust Bung! Made from a two-part flexible silicone rubber core and sleeve, it creates an awesome leak-proof seal to prevent water or other contaminants from getting into your exhaust pipe whilst you’re cleaning or maintaining your machine. It’s both 2 and 4-stroke compatible thanks to its removable two-part design.

It’s super easy to twist into place and comes with a handy lanyard to make removal easy!

FEATURES

• 2 and 4-stroke compatible thanks to removable 4 stroke bung sleeve
• Tapered design fits most exhaust diameters
• Silicone rubber core construction is sturdy and durable
• Supplied with lanyard for easy removal and storage
• Prevents water or contaminates entering the exhaust during cleaning
• Protects your engine 

HOW TO

Fingerprints and glossy marks are now a thing of the past. Matt Finish Detailer has been specifically developed for satin matt paints, matt finishes and matt vinyl wraps. The premium-grade formula will leave any matt surface with a streak and gloss-free protective finish that reduces dirt adhesion.

FEATURES

• Quick to use spray developed specifically for matt finishes
• Leaves a non-sticky, streak and gloss-free protective finish
• Available in 250ml
• Carbon Fibre safe
• *Biodegradable

*Only contents are biodegradable.

HOW TO

• Step 1 - Shake bottle vigorously.
• Step 2 - Ensure surface is clean, cool and dry. Now apply Matt Finish Detailer to all matt finishes.
• Step 3 - Wipe with a microfibre cloth and leave to dry.
• Note: Mask braking surfaces before application.

Muc-Off Waterless Wash is a highly advanced, easy-to-use spray that cleans and polishes in seconds without the need for water. It details your whole bike, motorcycle, or car in seconds leaving behind a streak free shine. Its innovative formula is designed to encapsulate any surface dirt to prevent scratching and it's safe to use on Carbon Fibre too.

Use it to remove light contaminants in between major washes.

FEATURES

• Cleans and polishes in one application
• No need for water!
• Long lasts lustre
• No residual dust or streaks
• Non-sticky
• Powder free
• Suitable to use on bicycles, motorcycles, cars & R.V's
• Safe to use on Carbon Fibre

HOW TO

1. Shake the bottle vigorously to activate formula.
2. Spray onto the surface and leave for a time to penetrate the light contaminants.
3. Now gently wipe the area with a clean, dry microfiber cloth. With each wipe fold the cloth to a clean side.
4. Using another clean microfiber cloth buff all areas to leave a showroom shine.
5. Do not use on heavy grit/grime or stubborn contaminants as this will inevitably lead to surface scratching.
6. Always use microfiber cloths as they trap the dirt away from the surface.

The Muc-Off Motorcycle Care Kit is the essential one-stop kit for moto care and maintenance, containing all the basic elements you need to keep your motorbike looking box-fresh for longer!

FEATURES

Motorcycle Cleaner

• Safe on all parts and surfaces including carbon fibre
• Will not harm seals, cables, brake pads or rotors
• Safe on anodized metal
• Alkaline based and free from CFCs, solvents or acids
• Nano Tech Formula cleans on a molecular level
• Biodegradable
• How to:
  • Step 1 - Rinse motorbike thoroughly before applying Nano Tech Motorcycle Cleaner.
  • Step 2 - Spray Nano Tech Bike Cleaner onto the entire motorbike including components and leave for 3-5 minutes. Do not let it dry or apply in direct sunlight.
  • Step 3 - Agitate any stubborn grime with a brush or sponge.
  • Step 4 - Rinse entire bike thoroughly with fresh, clean water.

Motorcycle Protectant

• High-performance formula leaves dry, non-sticky protective film
• For use after washing to drive out excess water
• Prevent dirt adhesion
• Makes an ideal winter protectant
• Quick and easy to use

Microcell Sponge

• Bike friendly size
• Expands after opening
• Ergonomic design

If you are looking for an all-round motorcycle protectant for your motorbike - then this is it! Helps prevent dirt adhesion between washes. Motorcycle Protectant has been developed so it can be used all over your motorbike, and has an after wash corrosion inhibitor which drives out moisture and leaves a non-sticky protective layer smelling of fresh Vanilla!

It’s safe to be used on the frame, chain, metal parts, plastics, rubber and of course the paintwork itself.

FEATURES

• High performance formula leaves dry, non-sticky protective film
• For use after washing to drive out excess water
• Prevent dirt adhesion
• Makes an ideal winter protectant
• Quick and easy to use
  

HOW TO

After washing your bike with Muc-Off bike cleaner, shake can vigorously and apply Motorcycle Protectant to disperse remaining moisture. Wipe off any excess fluid and leave to dry.

Note: Mask braking surfaces before application.

Let’s not beat around the bush, you want a high quality polish and protectant that delivers a deep and luxurious shine for your bike, motorcycle & cars bodywork, Muc-Off Wunder Shine is the product for that job. Not only does our Wunder Shine give you amazing reflective results – but it also covers the treated areas with a microscopic protective layer against atmospheric pollutants, thanks to it’s Fluoro Polymer Technology!

Our luxurious polish also includes Carnauba Wax as well as other highly advanced ingredients so that your paintwork is treated with love and respect. So if you want your paint finish to gleam like new, make the water bead away furiously and make the car easier to clean next time, Muc-Off Wunder Shine is the product for you.

FEATURES

• Removes imperfections and fills minor scratches
• Flouro Polymer technology creates a microscopic layer of protection
• Repels water and atmospheric pollutants
• Reduces washing and maintenance time
• Silicon oils allow easy application and incredible depth of shine
• Will not leave a powdery white residue
• Safe on paintwork, clear coat, carbon fibre, chrome, met

HOW TO

The Goldtop "Black Stuff" within this bottle has been specially formulated to soften, condition and preserve all Goldtop BLACK leather products. Goldtop "Black Stuff" is an especially pigmented black leather dye that also nourishes and revives old tired leathers. Each bottle comes with a sponge tip at the top of the bottle for easy application, and so whether reviving a vintage jacket, or removing a scratch or scuff, you'll be sure to get the job done with a bottle of Goldtop's "Black Stuff"!

Suitable for use on all black leather motorcycle clothing, equestrian equipment and footwear.

The Goldtop Vintage Oil has been specially formulated to soften, condition and preserve all Goldtop Aniline leather products. Goldtop Vintage Oil will also darken lighter shades of leather, adding to both the character and patina of the leather. This makes it perfect for use on any of Goldtop's tan leather gloves to give them that vintage and rustic, golden look. Vintage oil gives a bit of a lighter touch than waxes and greases.

• Vintage Oil
• 100% Natural product
• Darkens lighter leathers

• Soft-tempered crush washers are designed specifically to compress in fluid sealing applications.
• Most OEMs recommend replacement at each oil or coolant change

• M14x22mm Drain Plug Compression Washers: Aluminum Crush Washer - these will suit most Triumphs

If you need an oil filter for your Triumph motorcycle, check out these Hiflo Oil Filters for most Triumphs

100% Synthetic Ester based motorcycle lubricant for high performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial fitted with 4-stroke engines, integrated or non-integrated gearbox, wet or dry clutch, engines meeting Euro 2 or Euro 3 emission regulation, fitted with exhaust gas after treatment systems: catalytic converters, air injection into exhaust pipe. 

Types of Use

High performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial…fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2, 3, 4 or 5 emission regulation, fitted with exhaust gas after treatment systems : catalytic converters, air injection into exhaust pipe...

Other uses: street bikes without catalytic converters, scooters, ATV’s, UTV’s…

100% Synthetic Ester based motorcycle lubricant for high performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial fitted with 4-stroke engines, integrated or non-integrated gearbox, wet or dry clutch, engines meeting Euro 2 or Euro 3 emission regulation, fitted with exhaust gas after treatment systems: catalytic converters, air injection into exhaust pipe. 

Types of Use

High performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial…fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2, 3, 4 or 5 emission regulation, fitted with exhaust gas after treatment systems : catalytic converters, air injection into exhaust pipe...

Other uses: street bikes without catalytic converters, scooters, ATV’s, UTV’s…

100% Synthetic Ester based motorcycle lubricant for high performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial fitted with 4-stroke engines, integrated or non-integrated gearbox, wet or dry clutch, engines meeting Euro 2 or Euro 3 emission regulation, fitted with exhaust gas after treatment systems: catalytic converters, air injection into exhaust pipe. 

Types of Use

High performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial…fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2, 3, 4 or 5 emission regulation, fitted with exhaust gas after treatment systems : catalytic converters, air injection into exhaust pipe...

Other uses: street bikes without catalytic converters, scooters, ATV’s, UTV’s…

100% Synthetic Ester based motorcycle lubricant for high performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial fitted with 4-stroke engines, integrated or non-integrated gearbox, wet or dry clutch, engines meeting Euro 2 or Euro 3 emission regulation, fitted with exhaust gas after treatment systems: catalytic converters, air injection into exhaust pipe. 

Types of Use

High performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial…fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2, 3, 4 or 5 emission regulation, fitted with exhaust gas after treatment systems : catalytic converters, air injection into exhaust pipe...

Other uses: street bikes without catalytic converters, scooters, ATV’s, UTV’s…

Converts a Hybrid Headlift stand to be able to lift from the bottom of the forks. See notes below for additional fitment information.

NOTE: This will not convert our Newfront (F0031-000) model to be able to lift from the forks. It will only work with the 2012+ Hybrid Front Stand.

NOTE: The Forklift Stand is not recommended for 2012 DL650 Vstrom or FJR1300 motorcycles with ABS equipped. Must disconnect ABS sensor (5mm hex bolt) on late-model Hayabusas. '15+ Yamaha R1, FZ-10, MT-10, and '17+ R6 models with ABS will require the ABS Left Swivel (sold separately). '17+ GSXR1000 and '16+ Suzuki Hayabusa models will require the ABS Right Swivels (sold separately). If your bike is not listed, no ABS fitting issues have been reported.

Description

• Intensive anti-mist formula
• Advanced moisture absorption
• Lasts up to five days
• Safe on all plastics and glass
• Ideal for goggles, helmet visors, glasses and mirrors
• Available in 32mL spray bottles

Say goodbye to bug splatters and tar stains with our powerful yet safe Bug and Tar Remover - the ultimate solution for removing stubborn insect residue and road grime from your motorcycle or vehicle's exterior.

Formulated with cutting-edge technology, our Bug and Tar Remover is specially designed to break down and dissolve tough deposits of bugs, tar, tree sap, and other road grime. It is a fast-acting and effective solution that saves you time and effort in maintaining your vehicle's appearance.

FEATURES

• Fast acting, powerful formula is tough on removing bugs and tar yet gentle on your motorcycle/vehicles finish
• Readily Biodegradable
• Active agent derived from a renewable source
• Safe to use on hard surfaces including paint, metal, chrome, hard plastics & glass*.
• Spray on formula is easy to use

*We recommend testing a small, inconspicuous area first to ensure compatibility with your specific vehicle's finish. Not suitable for prolonged contact with rubber.

HOW TO

Application:

1. Before using Bug and Tar Remover, ensure all surfaces are cool and out of direct sunlight. Now thoroughly wash and dry the surface to be treated. This will ensure that any dirt, debris, or grime on the surface of the vehicle does not interfere with the effectiveness of the product or cause scratching when buffing.
2. Once the vehicle is clean and dry, shake the bottle to activate the formula, now spray on to the desired area* and allow it to penetrate the bug or tar for 1-2 minutes. For more stubborn baked-on contaminants, you may need to leave the product on for up to 5 minutes. (Do not leave for longer than this or apply in direct sunlight).
3. After the product has had time to work its magic, wipe away the residue with a clean, dry, microfiber cloth. Be sure to use a separate cloth for each area of the vehicle to prevent cross-contamination of the bug and tar residue.
4. Follow by protecting with one of our protective sprays or polishes.

*We recommend testing a small, inconspicuous area first to ensure compatibility with your specific vehicle's finish. Not suitable for prolonged contact with rubber or for use on helmets/helmet visors.

Store in a cool dry place out of reach of children.

Keep your precious steed in tip-top condition with the Muc-Off Harsh Condition Barrier. With a state-of-the-art thin film coating, it’ll make light work of rust and corrosion. It’s the perfect upgrade for winter months, or to keep your bike looking fresh all year long – as you’ll have 12 months of protection.

HCB-1 is suitable to use on all bicycles, e-bikes, motorcycles, e-moto bikes, UTVs, ATVs, quads, side-by-sides, snowmobiles, jet skis and other watercraft – just check around your weapon of choice and look out for signs of corrosion and apply.

This innovative product is a must-have. It’ll keep moisture out, creating a durable anticorrosive layer of protection on your bike’s frame, chain, metal parts, plastics and paintwork. And on parts that have already got some rust showing, it’ll get rid of it altogether.

To make it super easy to check that you’re protected, we’ve added a UV dye. With a UV light* you can check it’s correctly in place and ready to protect your bicycle, e-bike or motorcycle. So you can get out there and enjoy the ride, no matter what the weather.

*UV light sold separately

ANTI-CORROSION POWER

FEATURES

• Quick and easy to apply
• Dissolves existing rust
• 300+ hours salt spray to ASTM B-117
• Thin transparent film
• Strong capillary action allows the product to get into tight cracks and crevices
• Contains UV application dye to ensure complete protection
• Resistant to hot, cold and salt-water
• Ideal for use in harsh environments
• Creates a self-healing barrier, active for up to 12 months
• Safe to use on electrical components, paintwork and most rigid plastic trim
• Contains no wax silicon, Teflon or water
• Perfect for bicycles, e-bikes and motorcycles

HOW TO

1. Thoroughly wash and dry the surface before applying. It’s a good idea to test a small area for surface compatibility before complete coverage.
2. Before using, make sure the surface you are spraying on is cool and out of direct sunlight.
3. Shake the can to activate the formula. You can use the extension straw for a more precise application.
4. Apply a thin, even film of spray on the surface you want to protect* and allow it to dry completely. You may need to wait up to 24 hours to allow it cure, which will offer the best protection.
5. Check to make sure the coverage is even using the UV torch (sold separately)

*Just remember not to apply Harsh Condition Barrier to tyre treads and braking surfaces.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Washing and cleaning is an important part of the maintenance of technical fabrics. Our Bio-based Textile Wash Detergent helps maintain the fabric’s water-repellent finish (DWR) as well as breathability, without leaving chemical residue. It’s also effective in cold water and ideal to use as prep before reproofing with BioCare waterproofing products. Shaping a sustainable future for riding Its very concentrated bio-based makeup of 15-30% soap, 5-15% non-ionic surfactants, 1-5% anionic surfactants, <1% preservatives (2-phenoxyethanol), and enzymes makes the textile wash readily biodegradable.

500ML

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

To prolong the life to your favorite REV’IT! jacket, boots, or shoes, this bio-based, universal leather and footwear cleaner efficiently removes dirt and stains. From leather as well as other sensitive natural materials like wool. Also safe to use with waterproof items with membrane technology and ideal to use as prep before reproofing with BioCare waterproofing products. Shaping a sustainable future for riding Our bio-based leather care cleaner is fully plant-derived and consists solely of readily biodegradable ingredients - free from synthetic preservatives. Always follow the care instructions on labels of your products on how to properly care for them along with the instructions on the label of the care cleaner for the best results.

300ML

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Regular maintenance of your leather REV’IT! products optimize their performance and helps to ensure a long life. This care product is an effective multifunctional water-repellent wax that moisturizes, protects, and polishes leather. It maintains the leather’s breathability and extends your favorite jacket or shoes’ lifespan. Shaping a sustainable future for riding This leather care wax solely relies on 100% bio-based and readily biodegradable ingredients. Follow the instructions on the leather care wax packaging for how to use this product properly.

100ML

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

The maintenance of textile garments requires special attention, especially when they contain waterproof and breathable membranes. This spray-on restores and improves the water repellency (DWR) of technical motorcycle garments. Developed to be safe to use with waterproof membranes like GORE-TEX and suitable for fabrics like polyester, polyamide, wool, down, and blends. Maintains the material’s breathability, color, and fabric feel very well to keep your favorite gear in top shape for longer. Shaping a sustainable future for riding This product is made with bio-based ingredients, is biodegradable, and is free from fluorocarbons (PFC/PFAS), fossil-based polymers, and synthetic waxes. Always follow the care instructions on garment labels on how to properly care for them, along with the instructions on the label of the textile waterproofing spray.

500ML

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

To keep your waterproof textile garments performing at their best, adding a waterproofing wash-in to their maintenance routine is essential. This wash-in restores and improves the water repellency (DWR) of technical motorcycle garments. Developed to be safe to use with waterproof membranes like GORE-TEX and suitable for fabrics like polyester, polyamide, wool, down, and blends. It also helps to maintain the material’s breathability, color, and fabric feel to keep your favorite gear in top shape for longer. Shaping a sustainable future for riding This product is made with bio-based ingredients, is biodegradable, and is free of fluorocarbons like PFAS and PFC. It’s based simply on water, silicon organic polymers, natural fatty acids, and surfactants to make it readily biodegradable according to OECD 301F. Always follow the wash and care instructions on garment labels on how to properly care for them, along with the instructions on the label of the textile waterproofing wash-in.

500ML

Get ready to kick your bike care into high gear with the Motorcycle Chain Care Kit.

This all-in-one grime fighting trio will leave your drivetrain smoother than a slow jam. Packed with our Motorcycle Chain Cleaner, All-Weather Chain Lube, and a Motorcycle Chain Brush, this kit comes with everything you've need to blast dirt and grime to oblivion and keep your chain in top-notch condition, no matter what the weather throws at you.

Included in the kit is our Motorcycle Chain Cleaner, our powerful, readily biodegradable formula that rapidly cuts through oil, grease, and dirt with ease, ensuring a deep clean that penetrates the chain; our Motorcycle Chain Brush which is designed to reach every nook and cranny of the chain, making drivetrain maintenance an effortless task; and our All-Weather Chain Lube which has been specially formulated to provide long-lasting protection, ensuring peak performance in all conditions - from dusty trails to rainy commutes.

Biodegradable Motorcycle Chain Cleaner

Muc-Off ‘Biodegradable Motorcycle Chain Cleaner’ has been specifically formulated to rapidly remove dirt, grease lube and heavy chain grime using advanced solvents. Its unique formula breaks down oil and grease to leave the entire chain sparkling clean and contaminant free. Suitable for Standard O, X and Z-Ring chains.

• Quickly and safely remove dirt
• Rapid Grease shedding formula
• Leave the entire chain sparkling clean and contaminant free

All-Weather Chain Lube

Muc-Off ‘All-Weather Chain Lube’, a state of the art motorcycle chain lubricant means longer intervals between applications, with greater protection for your chain! Suitable for all weather on/off-road riding, its high performance synthetic formulation offers maximum protection the ceramic additives increase component life and maximise horsepower.

• Synthetic formulation for maximum protection
• Ceramic additives increase component life
• Contains UV over spray dye

Motorcycle Chain Brush

The multi-faceted, ergonomically-shaped 'Muc-Off Chain Brush' is designed to clean all sides of the chain at the same time and in between links and rollers, minimising the need for future repair or replacement. It's tough nylon bristles break down dirt on even the filthiest chains. Suitable for most chain sizes.

• Quickly and safely remove dirt
• Rapid Grease shedding formula
• Leave the entire chain sparkling clean and contaminant free

Project Green

• Project Green is our never-ending commitment to deliver a multitude of environmentally-focussed improvements across our business. We love the planet we ride on, it’s our playground, and we’re driven to protect it for everyone.
• This product has a Project Green credential; meaning that it’s either biodegradable, refillable, reusable, or all three!

What's Included

• All-Weather Chain Lube - 400ml
• Motorcycle Chain Cleaner - 400ml
• Motorcycle Chain Brush

May we introduce our high performance, state of the art motorcycle chain lubricant – the ceramic-based Muc-Off All-Weather Chain Lube.

After years of research and development, we identified that there were some big differences with what riders want and need from a chain lubricant. After all, Racing motorcycles, touring motorcycles and off-road machines are all going to have different chain lube requirements. Muc-Off All-Weather Chain Lube is the first of its kind and is set to revolutionise chain efficiency and performance for all motorcycles covering longer distances and is ideal for tourers or commuters as you can go far longer between reapplication intervals. Our unique water repellent, ceramic, non-fling formula penetrates deep into the chain link. This creates a durable protective coating which will guard your chain against corrosion and metal to metal wear, in all weather conditions. An added benefit to our unique formula is that it includes a UV Dye, which means you can accurately see the lubricants specific coverage when using a UV Torch. This also allows you to wipe away any overspray that may have otherwise gone undetected.

All-Weather Chain Lube means longer intervals between applications, with greater protection for your chain!

FEATURES

• Suitable for standard, O, X and Z-Ring chains.
• For long distance all weather on/off-road riding.
• High performance synthetic formulation for maximum protection.
• Ceramic additives increase component life and maximise horsepower.
• Contains UV over spray dye
  

Muc-Off Motorcycle Chain Cleaner has been specifically formulated to quickly and safely remove dirt, lube and heavy chain grime using advanced solvents. Its unique biodegradable formula breaks down oil and grease to leave the entire chain sparkling clean and contaminant free. Now with Watermelon fragrance!

DANGER: Extremely flammable aerosol. Pressurised container. May burst if heated. Keep out of reach of children.

FEATURES

• Rapid Grease shedding formula
• Water Soluble and Biodegradable*
• Suitable for Standard O, X and Z-Ring chains
• Safe on rubber, metal and carbon fibre components

*Only contents are biodegradable.

HOW TO

1. Thoroughly rinse drive chain area before application
2. Apply Bio Chain Cleaner to drive chain area
3. Agitate grime with a brush or sponge

PROJECT GREEN

Project Green is our never-ending commitment to deliver a multitude of environmentally-focussed improvements across our business. We love the planet we ride on, it’s our playground, and we’re driven to protect it for everyone.

This product has a Project Green credential; meaning that it’s either biodegradable, refillable, reusable, or all three!

We all know the dangers of using the wrong tools for the job of cleaning, unsightly swirls in the paintwork, degrading the finish over time. We developed the 2 in 1 Microfibre Wash Mitt to get around this problem, it’s pink (of course), extra plush and fluffy and will see off sponges as a thing of the past –  no more trapping grit and damaging your paintwork from here on in.

A  fast way to give your machine the ultimate finish without the swirl marks and say goodbye to bugs. Specially designed to give an unbeatable finish without the risk of swirl marks. This 2-in-1 wash mitt uses split fibre technology to increase its cleaning surface area and care for a  bike’s delicate finishes.  On one side the microfibre technology helps to break up dirt into minuscule particles and keep them away from the surface while you clean. While on the other, a waffle design gets rid of more stubborn deposits like bugs, tar, or any other grime that’s tougher to remove.

Simply, it’s now easier than ever to get your machine ready to rock in record time.

FEATURES

• Large surface area for easy cleaning: 19cm width x 21cm length
• Machine washable at 40°C
• Unique 2-in-1 design: Chenille microfiber wash mitt front and waffle bug remover design reverse
• Gives a scratch-free, lint-free and swirl-free finish
• Chenille technology – disintegrate dirt into miniscule particles
• Ultra-fine microfibre – premium quality, super soft microfibre has been designed to clean delicate finishes
• Tight elastic cuff for maximum control

HOW TO

1. Spray on our Nano Tech Bike Cleaner or Snow Foam either onto the area to be cleaned or directly onto the gloves
2. Use the waffle-design side to remove stubborn dirt and bugs
3. Then use the microfibre mitt side to gett scrubbing! Safe to use all-over your bike 
4. When you're done, wash with warm water or they are machine washable at 40°

NOTE: A $75 handling fee is applied to shipping cost due to this item being oversize/overweight.

Our new Hybrid One Armed features a removable handle which allows you to use the stand with the handle going either forward or toward the rear of the bike. The handle can be installed going either to the front or back on the drive side, but on BMW bikes, you cannot use this stand on the non-drive side of the motorcycle.

When installed on the drive side, it allows wheel removal. It offers solid leverage and stability and the ball bearing head makes it easy to spin the wheel for cleaning and maintenance.

Sold complete, but pins are interchangeable to fit other bikes.

Fits '13-'23 BMW R9T, R1200, K1300, depending on hub version. BMW changed the hub I.D. ever-so-slightly in '13 for some models but made the same change in '18 on other models. See fitting notes for exact years. We recommend the F0109-450 for the R1250 models due to the need for additional leverage. This stand will fit the R1250 as well as the pin is the same size, but leverage will be very poor.

Also fits R12 / R12 NINET / R 12 G/S

Does not fit: Any 1600 models or the newer R18 models(exhaust blocks access)

Steel inner pin with aluminum outer sleeve for lighter weight on large diameter pin. This pin is slightly larger than the original B pin that was used on the earlier '05+ BMW's. This size hub was scaled in by BMW starting in 2013, but not all 13+ models will use it.

Please see product fitting notes and/or our PDF fitting chart for more info. If you're not sure which hub you have, measure your hub with calipers and call us. We cannot provide dimensions on our products, but we can tell you which pin you'll need for your hub if you provide a measurement.

Instructions

Looking for an all round wonder spray? Look no further! Muc-Off MO-94 covers all the bases with it's incredible formula that quickly and effectively penetrates moisture, lubricates moving parts and leaves a long lasting protective film. MO-94 prevents dirt adhesion and also drives out excess water to keep rust and corrosion at bay. MO-94 isn’t just for bikes, motorcycles or cars. Nope. It works on just about anything. Whether you’ve got a squeaky door hinge, a rusty lock or a bolt that you just can’t turn, MO-94 is all you need.

*Just remember not to apply MO-94 to your bike’s tyre treads and braking surfaces!

FEATURES

• Free seized parts
• Disperses moisture to prevent rust and corrosion
• Provides light lubrication for moving parts
• Reduces metal to metal contact
• Prevents dirt adhesion
• Cuts down on friction to improve component efficiency
• Weight - 400g
• Biodegradable*

*Contents only.

HOW TO

1. Apply Disc Brake Covers to prevent over-spray and contaminating your discs and pads
2. Spray MO-94 over the desired area for treatment
3. You can use the pink directional straw for smaller, harder to reach parts
4. Allow area to dry
5. Wipe away any excess using a microfibre cloth

Reaching those hard-to-hit, fiddly areas when cleaning not only takes time but also means there is no guarantee that you’ve hit those all-important areas as thoroughly as possible.

‘We’ve got this’ said our Development Team!

Hello high-pressure. Keep your chain fresher than ever with our advanced Dry Chain Degreaser. It makes light work of oil build-up, grease and grime, without the need for rinsing. Its unique dry ‘zero residue’ formula means that after cleaning, it evaporates to leave the area clean as a whistle, with no residue.

It rips right through the toughest grime, including waterproof grease and chain lube. And we all know that a clean chain is a reliable chain, so you can get back to doing what you do best.

With its heavy-duty formula and high-pressure turbo spray, our Quick Drying Degreaser makes light work of oil build up. Eliminating grease and grime, it cuts through thick build up and is suitable for all purposes including gears and components.

HIGHLIGHTS

• No rinse heavy duty formula
• Can be used on chains, gears, mechs and individual components
• Works on the toughest waterproof grease and chain wax

FEATURES

• New high-pressure turbo spray
• Easily cuts through tough grease in seconds
• No rinse, heavy duty formula
• Can be used on chains, gears, mechs and individual components
• Works on the toughest waterproof grease and chain wax
• Safe on O, X and Z-rings

HOW TO

1. Use in a well-ventilated area.
2. Then use a brush or a rag to agitate any stubborn sections of grime.
3. Then your chain will be clean and ready for lubrication or protective treatments.
4. If you’re unsure of surface compatibility or if your bike has non factory finishes test a small area before use.
5. Store in a cool dry place.

• Stabilizes ethanol and gasoline mixtures
• Helps prevent oxidation and corrosion
• Recommended for premix or ethanol/gasoline blends
• Six- to eight-month protection
• Provides quick, easy start-ups after storage
• Available in 16-fluid ounce bottles
• Made in the U.S.A.