NEW ARRIVALS

MOTONE MAGNUM FORCE EXHAUST CLAMP NUTS - BRASS

$ 565.00

Magnum Force Forged Brass Exhaust Clamp Stud Nuts

Set Of 4 - Hot Forged Individually out of solid Brass

Will fit all the 2001 to Now Triumph Twins

Street Twin / Street Cup / Street Scrambler / Scrambler 1200 / Thruxton / Speed Twin / Bobber / T100 / T120 / SE / Scrambler 900 / Speed Twin 900 etc

MC PART ID: MMU080

MOTONE MAGNUM FORCE EXHAUST CLAMP NUTS - BRASS

MOTONE NUMBER/LICENSE PLATE "L-CLAMP" BRACKET REAR INDICATOR/TURN SIGNAL MOUNTS

$ 502.00

New License Plate Indicator L-Clamp Brackets

L shaped they clip into the slots that you would normally use to Bolt your Number Plate to the Plate Hanger/Bracket (e.g. Motone Round Tail Light Bracket OR Motone GORT Tail Light Bracket)

Indicator brackets work with

All Aftermarket Indicator out there (8 or 10mm Thread no problem)
Triumph OEM (Factory Original) Type Indicators

Includes blanking plates if not using the OEM holes

Made out of Stainless Steel and Powder Coated in Black

Sold as a pair.

MC PART ID: MMU586

MOTONE NUMBER/LICENSE PLATE "L-CLAMP" BRACKET REAR INDICATOR/TURN SIGNAL MOUNTS

MOTONE HIGH-TAIL CUSTOM MUDGUARD PREDRILLED FOR MOTONE FENDER LIGHT KITS - BLACK ANODISED - LC

$ 4,392.00

This is our High-Tail rear mudguard available here in brushed/Black Anodised finish

The high tail mudguard exits at the top of the frame of your bike - this means that it only works on the T120/T100 when with in conjunction with a custom seat (for example any of the Motone seats like the Viper or the Rattler) but not on the stock seat on the T120/T100 which has an overhang at the rear of the frame.

Street Cup/Street Twin/Street Scrambler stock seats do not have this issue.

Machine rolled out of 5052 Aluminium, Trimmed, Drilled and then Black Anodised - this rear mudguard is bolt-on for your Triumph Bonneville.

This version of the fender comes pre drilled ready to mount any of the Motone Fender Mount Light Kits (Eldorado, Bel Air, Lecter, Cuda, Big Fin etc).

It also has a hole for wiring loom (we recommend our part code DDM012) to pass through

NOTE: Motone Fender Light Kit (e.g. Eldorado Gloss Black or Eldorado Matte Black) number plate bracket, and wiring loom (e.g. DDM012) must be purchased separately. Please click on the links if you'd like to add these to your cart as well.

Fits 2016 and Up

Bonneville T100
Bonneville T120
Street Cup
Street Twin
Street Scrambler
Fender measures 570mm (22.5 inches) long measuring along the circumference from front to back.

180mm in width (7 inches)

To answer a common question - Fitting a High Tail Mudguard negates the need for a separate tail tidy

Please Note SPEED TWIN 900 2025+ has new chassis/frame so this mudguard wont fit (new version coming)

MC PART ID: MTE178

MOTONE HIGH-TAIL CUSTOM MUDGUARD PREDRILLED FOR MOTONE FENDER LIGHT KITS - BLACK ANODISED - LC

MOTONE TRIUMPH TURN SIGNAL WIRING ADAPTER FOR AC BONNIES 2001-2016

$ 377.00

Sold as a pair - these adapters allow Motone and other aftermarket turn signals to be plugged straight into the stock factory loom, no splicing of cables required.

Suitable for use on all the air-cooled (AC) Bonnies from 2001-2016

T100 / Thruxton / Scrambler / SE / Mag Wheel

Alternative version for LC 2016 and up bikes also available here.

Each pair of adapters will work with a pair of turn signals. Therefore, if you're installing four signal lights, order a quantity of two (2) to receive two pairs.

MC PART ID: DDM004

MOTONE TRIUMPH TURN SIGNAL WIRING ADAPTER FOR AC BONNIES 2001-2016

MOTONE T100/T120/STREET TWIN LC PANNIER/LUGGAGE RAILS - PAIR - BLACK

$ 2,133.00

Motone Quality:

Built from 16mm Diameter Grade 304 Stainless Steel Tubing with 1.25mm Wall Thickness
Investment Cast Brackets
Smooth Welds
Black Powder Coat

High Quality Pannier Rails with Investment Cast brackets in type 304 Stainless Steel - Black Powder Coat

Suitable for:

Triumph T100 2017 and up
Triumph T120 2016 and up
Triumph Street Twin 2016 and up
Triumph Street Scrambler 2017 and all further years and up (though obviously LHS only if high pipes)
Triumph Street Cup and all further years and up

Recommend combining with the Kriega DUO-28 Saddlebags to give you storage and turn your daily rider into a touring machine.

MC PART ID: MCB002

MOTONE T100/T120/STREET TWIN LC PANNIER/LUGGAGE RAILS - PAIR - BLACK

MOTONE SKIRMISH MINI RACK/GRAB RAIL ***SLIGHTLY BLEMISHED***

$ 3,764.00 $ 2,259.00 Guardar $ 1,505.00

***NOTE on this version: we have 3 Skirmish racks where the powder coat finish has been blemished in a couple spots during the course of shipping from the manufacturer. Other than the minor cosmetic imperfections, these are good as new and have never been mounted on a motorcycle. Due to the imperfections, we are offering these at a discounted rate. See pictures for noted blemishes circled in red. Each rack has no more than 1 or 2 cosmetic imperfections***

Formed out of 300 Series Stainless Steel and designed to fit on your 2016 and up Triumph Twin

This is the Skirmish! Our handly little Mini Rack/Passenger Grab Rail/In Garage Parking assistant - We made this so if you want to pop out for a quick trip to the shop to grab a 6 pack/coincidentally taking cover from your family well now you have a slightly better excuse - unlike all the other racks we have seen out there we also included a couple of handy latch tie downs position points

The Rail is also useful for parking the bike in confined space as well as for any passenger.

Street Twin / Speed Twin 900
Street Scrambler / Scrambler 900
Street Cup
T100
T120

***NEWLY UPDATED - THIS IS V2.0 OF THE SKIRMISH RACK WHICH FITS MOST KNOWN SEATS***

✅DOES FIT ALL OE STREET TWIN, SPEED TWIN 900, STREET SCRAMBLER, SCRAMBLER 900 SEATS

✅DOES FIT ALL MOTONE AND ALL KNOWN AFTERMARKET SEATS

✅DOES FIT OEM T100/T120 TRIUMPH QUILTED & RIBBED BENCH SEAT

✅ DOES FIT OEM T100/T120 OE "COMFORT" SEAT

If you have a pre 2016 bike we will have a version out for your bike at some point, please don't buy this on the off chance it will fit - the bolt holes are in different positions.

Unfortunately the Speed Twin 1200 has a different subframe so won't fit.

MC PART ID: MCB026

MOTONE SKIRMISH MINI RACK/GRAB RAIL ***SLIGHTLY BLEMISHED***

REV'IT! RITMO GLOVES - NEON YELLOW

$ 2,259.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Semi-ventilated, short-cuffed urban sport gloves

Short, sweet, semi-ventilated, simple, and safe. Those characteristics best describe the Ritmo urban sport gloves. Created for warmer rides, the blend of textile and leather materials strike a balance between protection and keeping hands safe. The right recipe Mix together 3D air mesh and goatskin to help hands achieve not only the freedom they need through flexibility, but the peace of mind that comes with these CE-level 1 gloves. In terms of safety features, TPR finger knuckles which have mesh inside the holes for ventilation properties, SEESOFT foam at the palm patch, and a TPU hard-shell knuckle and palm protector. Mix and match The Ritmo gloves make for an excellent combination with many of the sportive leather and textile jackets from our Urban Sport collection. And because we’ve also included a see-through material on the knuckles (but only on the neon yellow or black-neon red color styles – the other colorways have a solid knuckle), we’ve upped the ante in terms of design details. Try on a pair and experience it for yourself.

COMFORT FEATURES

Adjustability:
Adjustment tab at cuff

Stretch lips at fingers
Closure:
Hook-and-loop closure
Lining:
Tricot liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Grip patch at thumb

Pull tab

Short cuff

PROTECTION FEATURES

Protection:
Memory foam at fingers

Memory foam at palm

Memory foam underneath knuckle protector

SEESOFT at palm

TPR finger knuckles

TPU hard shell knuckle

TPU hard shell palm slider
Outer shell material:
3D air mesh

Corduroy

goatskin drum dyed with WR finish

microfiber e-touch

Neoprene

PU grip

PU (polyurethane) coated fabric

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

MOTONE CUSTOM BILLET INDICATOR TURN SIGNALS - M10 - SET OF 4 - BLACK

$ 4,015.00

Motone Billet Turn Signals

This Sale : 2xPAIRs [4 TURNSIGNALS] - ANODISED BLACK (AMBER BULBS, BOTH AMBER AND CLEAR LENSE INCLUDED)

Each turn signal comes with both a Clear and an Amber lense included in the package so you can assemble it as to your personal preference.

Turn Signal Body and Housing turned out of billet 6061 aluminium.

Osram 12v Amber bulbs included in the package. Lenses 40mm diameter and are e-marked. Thread stem is turned out of 10mm stainless with 30mm of usable length (M10 x 30)

MC PART ID: 2XXNM002B

MOTONE CUSTOM BILLET INDICATOR TURN SIGNALS - M10 - SET OF 4 - BLACK

MOTONE TANTO CHAIN GUARD - WRINKLE BLACK FINISH

$ 1,255.00

Tanto - named after the traditional Japanese short sword

Built out of 304 Series Stainless Steel and supplier here in a Wrinkle Coat Black Finish

To suit your 2016 and up :

Street Twin

Street Scrambler

Street Cup

T100

T120

MC PART ID: CSS006

MOTONE TANTO CHAIN GUARD - WRINKLE BLACK FINISH

MOTONE CUSTOM BRASS DISC BRAKE OIL RESERVOIR MASTER CYLINDER CAP - UNION JACK

$ 1,443.00

Forged out of Solid Brass with Union Jack Flag Design - we have also shot blast the piece after forging and then mirror polished the outside faces to give contrast to the design.

Fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round-shaped reservoirs as fitted to some models with 7/8s bars.

Fits : Bonneville, T100, America, T120, Speedmaster, Thruxton, Bobber

MC PART ID: MMU510

MOTONE CUSTOM BRASS DISC BRAKE OIL RESERVOIR MASTER CYLINDER CAP - UNION JACK

MOTONE INDICATOR/TURN SIGNAL BRACKETS FOR LC TRIUMPHS 10MM - PAIR - BLACK

$ 816.00

Sold as a pair.

CNC Machined out of Billet Aluminium and Anodised Black, these adapters fit directly onto the stock Indicator Mounts to allow you to fit an aftermarket Indicator with a regular 10mm Thread. The final position angle of your indicator is controlled by a stainless grub screw which locks the Indicator light in place.

This version (ADT002) is for Indicators/Turn Signals with 10mm Threads (Such as Motone Billet Indicators, MC PART ID NXM002B)

We also have an alternative version for Indicators with 8mm threads (e.g. Rizoma, Kellerman) which is part ADT002.

Fitment:

Suitable for Street Twin, T100, T120, Thruxton, Bobber, Street Cup, Street Scrambler, Speed Twin

These also work with Street Triple and Speed Triple and other modern Triumph motorcycles

MC PART ID: ADT003

MOTONE INDICATOR/TURN SIGNAL BRACKETS FOR LC TRIUMPHS 10MM - PAIR - BLACK

MOTONE INFINITY GAS CAP - BRASS RIPPLED TOP - ALUMINIUM THREAD

$ 1,757.00

Custom lathed out of Brass and aviation grade 6061t Aluminum.

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap in brass have been knurled for extra grip - the lower threaded part of the cap in aluminum has a spring-bound valve system centrally located in the middle of the bung.

This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.

It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.

FITS ALL YEARS TRIUMPH BONNEVILLE FAMILY BIKES FROM 2001 to 2025 INCLUDING T100, T120, STREET CUP, STREET SCRAMBLER, BOBBER, SPEEDMASTER, THRUXTON 900, SCRAMBLER, SE, AMERICA.

Note: only suitable for Street Twin/Speed Twin 900 and Speed Twin 1200 up to 2024.

** NOT SUITABLE FOR 2025 TRIUMPH SPEED TWIN 900/1200 NOR ANY OF THE 2026+ TRIUMPH MODELS, CURRENTLY UNDER DEVELOPMENT **

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THES BIKES (IN BLACK OR POLISH)

FITS ALL HARLEY DAVIDSON WITH SCREW IN CAPS 1983-2018 SPORTSTER, 48, IRON, ETC

MC PART ID: NXS001

MOTONE INFINITY GAS CAP - BRASS RIPPLED TOP - ALUMINIUM THREAD

MOTONE VINTAGE HOT FORGED BRASS CHAIN ADJUSTER

$ 1,192.00

To make these adjuster blocks we decided to return to the manufacturing process of a bygone era to produce the kit, namely Hot Forged Brass.

To produce a truly individual product the chain adjusters are hand-polished to reveal the facets of the forging process.

A thick Grade 304 Stainless Boss also included

Suitable for use on all the liquid cooled Twins including:

Street Twin (Speed Twin 900)
Street Scrambler (Scrambler 900)
Street Cup
Bobber
T100
T120
Thruxton 1200/R/RS
Scrambler 1200
Speedmaster
Speed Twin 1200

MC PART ID: MMU066

MOTONE VINTAGE HOT FORGED BRASS CHAIN ADJUSTER

MOTONE TPS CARB/THROTTLE BODY COVER - PAIR - UNION JACK - BLACK/CONTRAST POLISH

$ 1,443.00

Sold as a pair. Made using the same technology as the original equipment manufacturing process, high pressure die cast.

Suitable for any of the 1200 twins.

Fits : T120, Thruxton R, Thruxton S, Bobber, Speedmaster

Sold here in Black finish with Contrast Hand Polished Extremities

The covers come with 6 brass bolts similar to those found on the original monobloc Amal carbs, which were of course the inspiration for the look of the throttle body that Triumph has employed on these motors - fitment of the brass bolts is optional - you can also reuse your stock silver bolts.

MC PART ID: MMU009

MOTONE TPS CARB/THROTTLE BODY COVER - PAIR - UNION JACK - BLACK/CONTRAST POLISH

MOTONE DISC BRAKE OIL RESERVOIR MASTER CYLINDER CAP - UNION JACK - BRASS & BLACK

$ 1,443.00

Forged out of Solid Brass with Union Jack Flag Design - Contrast with Black lower faces

Fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars.

Fits :

Bonneville, T100, America, T120, Speedmaster, Thruxton, Bobber

MC PART ID: MMU092

MOTONE DISC BRAKE OIL RESERVOIR MASTER CYLINDER CAP - UNION JACK - BRASS & BLACK

MOTONE CUTLASS CHAIN GUARD FOR TRIUMPH BOBBER - GLOSS BLACK

$ 2,510.00

This is the CUTLASS our new Chain Guard for the Triumph Bobber and Speedmaster 1200

It's a proper full-length chain guard not a strange imitation of one that seems to have become popular of late on the aftermarket, presumably because its alot easier to make a little one than a proper one

Made out of Steel and finished in Gloss Black - Bolt-On for your Bike

MC PART ID: MTE206

MOTONE CUTLASS CHAIN GUARD FOR TRIUMPH BOBBER - GLOSS BLACK

MOTONE PICO LED INDICATOR TURN SIGNALS - PAIR - BLACK - M8

$ 2,761.00

MOTONE PICO LED T/S : TURN SIGNAL / INDICATORS

SOLD HERE : PAIR [2 TURN SIGNALS]

ECE R50 - LAB TESTED FULLY COMPLIANT ROAD LEGAL
CUSTOM PCB
FULL METAL JACKET - ALUMINIUM HOUSING
ORSAM SMD LED
BRAIDED CABLES TERMINATING IN 3.9MM BULLET CONNECTORS
WATERPROOF
RUBBER BOOT CABLE TIDY
PMMA LENS
SIZE W 18 x H 44 x D 25.5 mm
MOUNTED ONTO A M8 THREAD

Combine with various Motone brackets and adapters to fit anywhere on your bike:

Brackets for front of bike:

Billet Adapter Brackets mount M8 Indicators such as the PICO direct to stock Triumph Indicator position (2016 and up bikes)
Clampit Brackets to mount to front fork 41mm (other sizes also coming)
Boomerang Bracket - fits on the bottom yoke suitable for the Street Twin/Speed Twin 900

Brackets for rear of bike:

V2 Shock Mount Brackets to mount to rear shock
Under Seat Brackets LC Triumph - Use the bolt holes under the rear of the seat to fit Indicators towards rear of frame - Liquid Cooled Bonneville so 2016 to 2025+)
Under Seat Brackets AC Triumph - Under seat brackets for the aircooled (2001-2015) Bonnevilles
Triline Brackets to mount to Rear Shock
Ajax - Designed specifically for the Triumph Bobber these brackets allow you to fit signals onto the rear of the bike using the airbox bolts
Number Plate Brackets - Adapter Brackets that allow the lights to be fit direct to your rear number plate bracket without needing to drill any holes etc

Wiring Adapters

Please note if you have one of our tail tidies or rear loom adapters they would already terminate in a 3.9mm Bullet so plug and play from there on.

DDM011: Wiring Adapter to Convert to OE Triumph Wiring Plugs (2016 to 2025+)
DDM004: Wiring Adapter to Convert to OE Triumph 2001-2015
DDM014: Wiring Adapter for Royal Enfield 650
DDM005: Wiring Adapter for Royal Enfield Meteor/Hunter 350

MC PART ID: MFX003

MOTONE PICO LED INDICATOR TURN SIGNALS - PAIR - BLACK - M8

MOTONE JETSON DISHED LOW PROFILE FUEL GAS CAP - BILLET ALUMINIUM - BLACK

$ 1,631.00

This is our latest creation, the JETSON our Dished Low-profile Gas Cap for your pride and joy

The JETSON actually works as both a VENTED and NON-VENTED Gas Cap as it can be assembled with the Vents open or closed, which means besides working on any modern Triumph Twin its also works on custom choppers, Harley Tanks as well as the BMW R18

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for extra grip - the lower threaded part of the cap has a spring-bound valve system centrally located in the middle of the bung.

FITS ALL YEARS BONNEVILLE THRUXTON, AMERICA, T100, SPEEDMASTER, SE, SCRAMBLER, BOBBER, STREET CUP, STREET SCRAMBLER, T120 : 2001 to TODAY. Only suitable for Street Twin/Speed Twin 900 and Speed Twin 1200 up to 2024.

** NOT SUITABLE FOR 2025 TRIUMPH SPEED TWIN 900/1200 NOR ANY OF THE 2026+ TRIUMPH MODELS, CURRENTLY UNDER DEVELOPMENT **

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018,SPORTSTER, 48, IRON ETC

MC PART ID: MMU653

GOLDTOP PREMIUM COTTON NECK TUBE - RED & WHITE CHECKER

$ 628.00

73% Cotton, 23% Polyamide, 4% Elastane
Double tubed with ultra-fine stitching along each checker for enhanced shape retention & fit when worn over face
2-Way stretch across the width for perfect grip and fit
Measure around head to gauge fit - most men will require size Large
Made in England

GOLDTOP PREMIUM COTTON NECK TUBE - RED & WHITE CHECKER

GOLDTOP PREMIUM COTTON NECK TUBE - GREEN & WHITE CHECKER

$ 628.00

73% Cotton, 23% Polyamide, 4% Elastane
Double tubed with ultra-fine stitching along each checker for enhanced shape retention & fit when worn over face
2-Way stretch across the width for perfect grip and fit
Measure around head to gauge fit - most men will require size Large
Made in England

GOLDTOP PREMIUM COTTON NECK TUBE - GREEN & WHITE CHECKER

MOTONE TELSTAR LOW PROFILE FUEL GAS CAP - BILLET ALUMINIUM - BLACK

$ 1,631.00

This is our latest creation, the TELSTAR Low-profile Gas Cap

The TELSTAR actually works as both a VENTED and NON-VENTED Gas Cap as it can be assembled with the Vents open or closed, which means besides working on any modern Triumph Twin its also works on custom choppers, Harley Tanks as well as the BMW R18

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for grip

FITS ALL YEARS BONNEVILLE THRUXTON, AMERICA, T100, SPEEDMASTER, SE, SCRAMBLER, BOBBER, STREET CUP, STREET SCRAMBLER, T120 : 2001 to 2025. Only suitable for Street Twin/Speed Twin 900 and Speed Twin 1200 up to 2024.

** NOT SUITABLE FOR 2025 TRIUMPH SPEED TWIN 900/1200 NOR ANY OF THE 2026+ TRIUMPH MODELS, CURRENTLY UNDER DEVELOPMENT **

TRIUMPHS WITH STOCK FAUX-MONZAS (SPEED TWIN 1200/SCRAMBLER 1200/THRUXTON 1200) we would recommend the Billet Gas Cap NXS006 and the Adapter Ring (BLACK or POLISHED) instead rather than this one

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018,SPORTSTER, 48, IRON ETC

MC PART ID: MMU656

MOTONE CUSTOM FUEL GAS CAP - BILLET ALUMINIUM - SPUN SATIN FINISH

$ 1,631.00

Custom lathed out of aviation grade 6061t Aluminum.

This sale is for the complete new cap fully assembled and ready to fit on your bike. This version has spun Satin Finish.

Sides of the top cap knurled for extra grip - the lower threaded part of the cap has a spring-bound valve system centrally located in the middle of the bung.

This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.

It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.

FITS ALL YEARS TRIUMPH BONNEVILLE FAMILY BIKES FROM 2001 to 2025 INCLUDING T100, T120, STREET CUP, STREET SCRAMBLER, BOBBER, SPEEDMASTER, THRUXTON 900, SCRAMBLER, SE, AMERICA.

Note: only suitable for Street Twin/Speed Twin 900 and Speed Twin 1200 up to 2024.

** NOT SUITABLE FOR 2025 TRIUMPH SPEED TWIN 900/1200 NOR ANY OF THE 2026+ TRIUMPH MODELS, CURRENTLY UNDER DEVELOPMENT **

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THES BIKES (IN BLACK OR POLISH)

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018 PRESENT SPORTSTER, 48, IRON ETC

MC PART ID: NXS010

MOTONE CUSTOM FUEL GAS CAP - BILLET ALUMINIUM - SPUN SATIN FINISH

MOTONE INDICATOR/TURN SIGNAL BRACKETS FOR LC TRIUMPHS 8MM - PAIR - BLACK

$ 816.00

Sold as a pair.

CNC Machined out of Billet Aluminium and Anodised Black, these adapters fit directly onto the stock Indicator Mounts to allow you to fit an aftermarket Indicator with a regular 8mm Thread. The final position angle of your indicator is controlled by a stainless grub screw which locks the Indicator light in place.

This version (ADT002) is for Indicators/Turn Signals with 8mm Threads (Such as Rizoma / Kellermann etc)

We also have an alternative version for Indicators with 10mm threads (e.g. Motone Billet Indicators) which is part ADT003.

Fitment:

Suitable for Street Twin, T100, T120, Thruxton, Bobber, Street Cup, Street Scrambler, Speed Twin

These also work with Street Triple and Speed Triple and other modern Triumph motorcycles

MC PART ID: ADT002

MOTONE INDICATOR/TURN SIGNAL BRACKETS FOR LC TRIUMPHS 8MM - PAIR - BLACK

MOTONE REAR WIRING LOOM - PLUG AND PLAY - BOBBER/SPEEDMASTER

$ 941.00

Plug and Play Rear wiring Loom - this connects directly into the rear harness plug of your bike and allows you to fit after market Taillights, Indicators, Accessories etc. without having to chop into the stock loom

This Loom our part code DDM016 fits:

All Years Triumph Bobber
All Years Speedmaster 1200

Note that his loom contains a resistor to stop the issue of causing the engine warning light to come on when fitting aftermarket Tail lights.

Wired as Follows:

Orange - R - is RHS Indicator
Brown - L - is LHS Indicator
As part of the T (Tail light) Section we have YELLOW as the Running Light, RED as the Brake Light as well as associated Earths for each of the above

The Tail light connectors all have double spades in the case that you are running for example our Pico 3in1 Rear lights which means you essentially have 2 tail lights (one on each side)

There is also a spare A Auxiliary Wire in Green which has its own earth, you can either use this to power an external device or you can use it to power a Number Plate Illumination Light if you are running a side mount plate kit which doesn't have a tail light with a license plate illumination light section of its own.

And remember the top 3 electrical faults are 1 Bad Earth, 2 Bad Earth, 3 Bad Earth. Always check fuse box - and for belt and braces you may want to disconnect first battery before plugging in new parts.

Note: while Motone's website says this loom will work for the Triumph Scrambler 1200, if you intend on installing 3in1 signal lights, you will need to add an inline 37 ohm 2 watt resistor to the brake light wire on the 3in1 indicator to allow the brake light to function properly. Otherwise, when you apply the brake, it will remain the same brightness as the running light and will appear as if the brake light isn't working. As such, we don't recommend purchasing this harness for your 1200 scrambler unless you are prepared to install an inline resistor and are knowledgeable about such installation.

MC PART ID: DDM016

MOTONE REAR WIRING LOOM - PLUG AND PLAY - BOBBER/SPEEDMASTER

MOTONE BLACK BILLET RING ADAPTER FOR FITTING GAS CAPS TO SPEED TWIN / THRUXTON / SCRAMBLER 1200

$ 565.00

This is the BLACK version of the Motone Billet Ring Adapter for fitting gas caps to Speed Twin 1200 / Thruxton 1200 / Scrambler 1200

If you have tried to swap your fuel cap out from the stock "monza" on your Thruxton 1200/Speed Twin 1200/Scrambler 1200 tank you will have found that you have been left with a strange notched ridge that is welded into the top of the tank.

Up until now your only choice was either ignore it or grind it off.

We have machined these snap-fit ring adapters out of billet to take care of this problem for you.

This sale is for the ring adapter piece only. These are CNC machined out of 6061- T6 aluminium - wrinkle Black Powder Coat

Suitable for use in combination with any Motone Monza or Billet Gas Cap

MC PART ID: MMU555

MOTONE BLACK BILLET RING ADAPTER FOR FITTING GAS CAPS TO SPEED TWIN / THRUXTON / SCRAMBLER 1200

MOTONE SPEED TWIN/THRUXTON 1200 LC PANNIER/LUGGAGE RAILS - PAIR - BLACK

$ 2,133.00

Motone Quality :

Built from 16mm Diameter Grade 304 Stainless Steel Tubing with 1.25mm Wall Thickness
Investment Cast Brackets
Smooth Welds
Black Powder Coat

High Quality Pannier Rails with Investment Cast brackets in type 304 Stainless Steel - Black Powder Coat

Suitable for:

Thruxton 1200 R/S/RS - all Variants
Speed Twin 1200 - all Variants

Recommend combining with the Kriega DUO-28 Saddlebags to give you storage and turn your daily rider into a touring machine.

MC PART ID: MCB010

MOTONE SPEED TWIN/THRUXTON 1200 LC PANNIER/LUGGAGE RAILS - PAIR - BLACK

MOTONE AC PANNIER/LUGGAGE RAILS - PAIR - BLACK

$ 2,133.00

Sold as Pair

Motone Quality :

Built from 16mm Diametre Grade 304 Stainless Steel Tubing with 1.25mm Wall Thickness
Smooth Welds
Powder Coat BLACK Finish

High Quality Pannier Rails built in 304 Stainless Steel

Suitable for

Bonneville T100 CARB 2001-2008

Bonneville T100 EFI 2009-2016

Bonneville Mag Wheel 2009-2015

Scrambler CARB 2006-2008

Scrambler EFI 2009-2016

Thruxton CARB 2004-2008

Thruxton EFI 2009-2016

Recommend combining with the Kriega DUO-28 Saddlebags to give you storage and turn your daily rider into a touring machine.

MC PART ID: MCB008

MOTONE AC PANNIER/LUGGAGE RAILS - PAIR - BLACK

MOTONE THE ZEPHYR - T120 INTAKE COVERS / THROTTLE BODY TRIM - BLACK

$ 1,443.00

The Zephyr - Metal Intake Covers in Black Suitable for your T120 Motorcycle

Fits all years Triumph T120 from 2016 to Today

Formed out of High Pressure Die Cast Aluminium

Sold as a Set with both Left and Right pieces included and finished in our signature wrinkle powder Black

These are a bolt on piece and can be fit at home in minutes

MC PART ID: MMU578

MOTONE THE ZEPHYR - T120 INTAKE COVERS / THROTTLE BODY TRIM - BLACK

MOTONE STAINLESS FRANKEN BOBBINS - PADDOCK STAND FIXING KIT

$ 1,255.00

Stainless Steel Bobbins suitable for use on Triumph Bobber and Triumph Speedmaster

Franken Bobbins

They come with a polished stainless boss as well as stainless M8 Bolts which are 50mm Long

The Franken Bobbins can also be used on most any bike that has facility to take a Bobbin supported by a M8 Bolt

Includes : Triumph Bobber, Triumph Speedmaster, Triumph Scrambler 1200, Triumph Thruxton 1200, Triumph Speed Twin 1200, Royal Enfield Interceptor, Triumph Speed Triple, Street Triple

MC PART ID: MMU081

MOTONE STAINLESS FRANKEN BOBBINS - PADDOCK STAND FIXING KIT

MOTONE SHOCK MOUNT INDICATOR BRACKETS V2 FOR ALL INDICATORS - PAIR - BLACK

$ 628.00

Sold as a pair.

New Shock mount 2.0 Indicator brackets will work on many different types, makes, and models of bikes with capability to mount

Pretty much Any known Aftermarket Indicator out there (8 or 10mm Thread no problem)
Triumph OEM (Factory Original) Type Indicators

Can be fit on outside or inside of Shock depending on the type of shock you have.

Includes blanking plates if not using the OEM holes.

Each bracket can be fit on either side of the bike

Made out of Stainless Steel and Powder Coated in Black

MC PART ID: MMU585

MOTONE SHOCK MOUNT INDICATOR BRACKETS V2 FOR ALL INDICATORS - PAIR - BLACK

MOTONE TITAN BOLTS - TITANIUM BRAKE ROTOR BOLTS x 14 PCS - NATURAL FINISH - LC - FULL SET (DUAL FRONT DISC + REAR DISC)

$ 2,133.00

Part of our Titanium series - each bolt is individually precision machined out of billet GR5 Grade Titanium

ALL MOTONE TITAN BOLTS COME PRELOADED WITH THREADLOCKER - READY TO FIT

Available here in a set of 14 Bolts - so thats enough for your full Bike (dual front and single rotor rear) 2016-to-today Triumph Twin

Available here in Natural Titanium finish

BOLT SPEC : M81.25x30

Also available in PVD Black, as well as sets of 9 for single front disc twins and also available in a different spec for the older aircooled bikes

MC PART ID: SHN006

MOTONE TITAN BOLTS - TITANIUM BRAKE ROTOR BOLTS x 14 PCS - NATURAL FINISH - LC - FULL SET (DUAL FRONT DISC + REAR DISC)

MOTONE BOBBER/SPEEDMASTER LC PANNIER/LUGGAGE RAILS - PAIR - BLACK

$ 2,133.00

Motone Quality :

Built from 16mm Diameter Grade 304 Stainless Steel Tubing with 1.25mm Wall Thickness
Investment Cast Brackets
Smooth Welds
Powder Coat Black Finish

High Quality Pannier Rails with Investment Cast brackets in type 304 Stainless Steel - BLACK

Suitable for:

Triumph Bonneville Bobber
Triumph Bonneville Bobber Black
Triumph Bonneville Speedmaster 1200

You may wish to combine with the Kriega DUO-28 Saddlebags to give you storage and turn your daily rider into a touring machine.

MC PART ID: MCB004

MOTONE BOBBER/SPEEDMASTER LC PANNIER/LUGGAGE RAILS - PAIR - BLACK

MOTONE BILLET DISC BRAKE OIL RESERVOIR MASTER CYLINDER CAP - MODERN LOGO - BLACK

$ 1,004.00

CNC Cut from billet aviation 6061-T6 aluminum - fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars.

Some models it will fit include Bonneville, T100, America, T120, Speedmaster, Thruxton.

MC PART ID: SNG217

MOTONE DEFENDER MKII (BOBBER) SUMP GUARD - BLACK

$ 3,764.00

Deep Drawn from type 5052 Aluminium Sheet - the Motone Defender Sump Guard

Hand Brushed and then Anodised Black

Designed and Built to Last - there is a lot of junk out there

DEFENDER MKII Suitable for all years TRIUMPH BOBBER 1200 (Both the Bobber Black, Standard Bobber, Single Disc Bobber etc).

This part will not fit with factory forward controls therefore won't work with the Speedmaster 1200 which has forward controls on most common variants

MC PART ID: MTE182

MOTONE DEFENDER MKII (BOBBER) SUMP GUARD - BLACK

MOTONE SHOCK MOUNT FINISHING KIT - BRASS

$ 941.00

Turned out of Billet Brass

A simple yet elegant solution to improve the look on the top and bottom shock mounts over the factory Triumph setup.

Includes all stainless bolts.

Available here BRASS as pictured.

Fits T100 / T120 / Street Twin / Thruxton / Scrambler - All Years 2001-Now

MC PART ID: OTS008

MOTONE SHOCK MOUNT FINISHING KIT - BRASS

MOTONE GORT LED TAIL LIGHT - GLOSS BLACK

$ 1,443.00

Gort!

Full SMD-LED circuit board.

Works as Running Light, Brake Light and Number plate illumination through window on underside.

Diecast Aluminium with a Gloss Black Finish

Fully E-Marked for Homologation.

Wired as follows :

Yellow = RUNNING light

Red = STOP light

Black = Earth

MC PART ID: MEL526

MOTONE GORT LED TAIL LIGHT - GLOSS BLACK

MOTONE T120/T100 "JUPITER-2" EXHAUST TIP KIT - BRASS

$ 2,761.00

Exhaust Tips and Adapter Bracket kit for 2016 and up Triumph T100 and T120 Motorsickles - We Call these the Jupiter-2 and this is the BRASS version

Remove you stock mufflers and replace with these Solid Brass Forged Tips - including Stainless steel adapter brackets and hardware.

MC PART ID: MMU529

MOTONE T120/T100 "JUPITER-2" EXHAUST TIP KIT - BRASS

MOTONE TWISTER CLUTCH CABLE ADJUSTER - BRASS - M8x1.25x18

$ 816.00

Part of our BRASS range of components. This is the TWISTER - BRASSY edition

Precision machined out of Billet C36000 Brass - these Clutch Cable adjusters fit all Triumphs and replace the stock units that are prone to rusting up.

Running an an M8 Thread they likely will also fit other Makes and Models of bikes as well

MC PART ID: SHN003

MOTONE TWISTER CLUTCH CABLE ADJUSTER - BRASS - M8x1.25x18

MOTONE PARABOLA ENGINE OIL FILLER CAP - DISHED - BRASS

$ 941.00

First of our new series of Dished Custom Parts - the PARABOLA - BRASSY EDITION

Engine Oil Filler Cap

Lathe Turned out of in BRASS
Fitted with oil resistant O-Ring seal

FITS ALL YEARS HINCKLEY BONNEVILLE

T100 / T120 / STREET TWIN / SPEED TWIN / STREET CUP / THRUXTON / BOBBER / SPEEDMASTER / STREET SCRAMBLER / SCRAMBLER 1200 / SE

FITS ALL 790/865/900/1200 Twins 2001-Today

MC PART ID: MMU620

MOTONE PARABOLA ENGINE OIL FILLER CAP - DISHED - BRASS

MOTONE PICO LED 3-IN-1 BRAKE LIGHT/TAILLIGHT/INDICATOR TURN SIGNALS - PAIR - BLACK - M8

$ 3,263.00

MOTONE PICOMULTI LED 3in1 :

TURN SIGNAL (INDICATORS)
BRAKE LIGHT
RUNNING LIGHT (TAIL LIGHT)

SOLD HERE: PAIR [2 LIGHTS]

ECE R148 - LAB TESTED FULLY COMPLIANT ROAD LEGAL
CUSTOM PCB
FULL METAL JACKET - ALUMINIUM HOUSING
ORSAM SMD LED
BRAIDED CABLES TERMINATING IN 3.9MM BULLET CONNECTORS
WATERPROOF
RUBBER BOOT CABLE TIDY
INPUT: DC 12v

SPECS

Indicator Light Power: 1.2W
Running Light Power: 0.5W
Brake Light Power: 1.2W
Indicator Brightness: 77 Cd
Running Light Brightness: 9 Cd
Brake Light Brightness: 50 cd
PMMA LENS (TIR Optical Lense tech)
SIZE W 18 x H 44 x D 25.5 mm
MOUNTED ONTO A M8 THREAD

There are 4 Wires exiting each Light Unit - Functionality is as follows:

RED - BRAKE LIGHT
YELLOW - INDICATOR
BROWN - RUNNING LIGHT
BLACK - EARTH NEUTRAL

Combine with various Motone brackets and adapters to fit anywhere on your bike:

Brackets for front of bike:

Billet Adapter Brackets mount M8 Indicators such as the PICO direct to stock Triumph Indicator position (2016 and up bikes)
Clampit Brackets to mount to front fork 41mm (other sizes also coming)
Boomerang Bracket - fits on the bottom yoke suitable for the Street Twin/Speed Twin 900

Brackets for rear of bike:

V2 Shock Mount Brackets to mount to rear shock
Under Seat Brackets LC Triumph - Use the bolt holes under the rear of the seat to fit Indicators towards rear of frame - Liquid Cooled Bonneville so 2016 to 2025+)
Under Seat Brackets AC Triumph - Under seat brackets for the aircooled (2001-2015) Bonnevilles
Triline Brackets to mount to Rear Shock
Ajax - Designed specifically for the Triumph Bobber these brackets allow you to fit signals onto the rear of the bike using the airbox bolts
Number Plate Brackets - Adapter Brackets that allow the lights to be fit direct to your rear number plate bracket without needing to drill any holes etc

Wiring Adapters

Please note if you have one of our tail tidies or rear loom adapters they would already terminate in a 3.9mm Bullet so plug and play from there on
Each Light Unit has 4 Wires that terminate in a standard Japanese spec 3.9mm Bullet - The Red wire is the Brake Light, the Yellow wire is the Running Light, the Brown Wire is the Indicator Light and the Black is the Earth/Neutral
We have a Wiring Loom adapter for the Triumph Bobber / Scrambler 1200 that can be run directly with these MULTI 3in1 Indicators available here part code DDM016

MC PART ID: MFX004

MOTONE PICO LED 3-IN-1 BRAKE LIGHT/TAILLIGHT/INDICATOR TURN SIGNALS - PAIR - BLACK - M8

MOTONE FINNED EXHAUST CLAMPS - LC - BLACK/CONTRAST POLISHED FINS

$ 2,635.00

VERSION 2.0 - INVESTMENT CAST STAINLESS STEEL

Big Fin Exhaust Clamps for LC Triumph Twins - Supplied here finished in Black with Polished fin outer edges!

Inspired by the Webco finned cooling parts of the 1970s these are bolt on replacement for your stock clamps

These fit all the 900 and 1200 cc Triumph Twins except the Thruxton/Speed Twin 1200 which have a link pipe on the stock headers at the exhaust port that gets in the way.

These fit 2016 and UP: Street Twin/Speed Twin 900, Street Cup, Street Scrambler, Speedmaster, Bobber, T100, T120

MC PART ID: MMU505

MOTONE FINNED EXHAUST CLAMPS - LC - BLACK/CONTRAST POLISHED FINS

MOTONE TITAN BOLTS - TITANIUM BRAKE ROTOR BOLTS x 14 PCS - BLACK FINISH - LC - FULL SET (DUAL FRONT DISC + REAR DISC)

$ 2,133.00

Part of our Titanium series - each bolt is individually precision machined out of billet GR5 Grade Titanium

ALL MOTONE TITAN BOLTS COME PRELOADED WITH THREADLOCKER - READY TO FIT

Available here in a set of 14 Bolts - so thats enough for your full Bike (dual front and single rotor rear) 2016-to-today Triumph Twin

Available here in BLACK

BOLT SPEC : M81.25x30

Also available in natural, as well as sets of 9 for single front disc twins and also available in a different spec for the older aircooled bikes

MC PART ID: SHN009

MOTONE TITAN BOLTS - TITANIUM BRAKE ROTOR BOLTS x 14 PCS - BLACK FINISH - LC - FULL SET (DUAL FRONT DISC + REAR DISC)

MOTONE TITAN BOLTS - TITANIUM BRAKE ROTOR BOLTS x 9 PCS - NATURAL FINISH - LC - FULL SET (SINGLE FRONT DISC + REAR DISC)

$ 1,443.00

Part of our Titanium series - each bolt is individually precision machined out of billet GR5 Grade Titanium

ALL MOTONE TITAN BOLTS COME PRELOADED WITH THREADLOCKER - READY TO FIT

Available here in a set of 9 Bolts - so thats enough for your full Bike a single front disc 2016-to-today Triumph Twin

Available here in Natural Titanium finish

BOLT SPEC : M81.25x30

Also available in PVD black, as well as sets of 14 for dual front disc twins and also available in a different spec for the older aircooled bikes

MC PART ID: SHN005

MOTONE TITAN BOLTS - TITANIUM BRAKE ROTOR BOLTS x 9 PCS - NATURAL FINISH - LC - FULL SET (SINGLE FRONT DISC + REAR DISC)

MOTONE TITAN BOLTS - TITANIUM BRAKE ROTOR BOLTS x 9 PCS - BLACK FINISH - LC - FULL SET (SINGLE FRONT DISC + REAR DISC)

$ 1,443.00

Part of our Titanium series - each bolt is individually precision machined out of billet GR5 Grade Titanium

ALL MOTONE TITAN BOLTS COME PRELOADED WITH THREADLOCKER - READY TO FIT

Available here in a set of 9 Bolts - so thats enough for your full Bike a single front disc 2016-to-today Triumph Twin

Available here in PVD BLACK

BOLT SPEC : M81.25x30

Also available in Natural finish, as well as sets of 14 for dual front disc twins and also available in a different spec for the older aircooled bikes

MC PART ID: SHN008

MOTONE TITAN BOLTS - TITANIUM BRAKE ROTOR BOLTS x 9 PCS - BLACK FINISH - LC - FULL SET (SINGLE FRONT DISC + REAR DISC)

MOTONE SIDEKICK (AXLE-MOUNT) SIDE MOUNT NUMBER PLATE KIT (NO TAIL LIGHT VERSION) - HORIZONTAL PLATE

$ 2,510.00

Designed Primarily for the Bobber/Speedmaster - will test and update for other models shortly

Motone have made 2 versions of this kit - this version includes a license plate light but no tail light. There is also a tail light version available that we can order for you if desired.

Kits Consists of

Axle Plate Bracket - Forged Stainless Steel (MMU607)
Side Mount Plate Mount Kit - Laser Cut Aluminium - Black Powder Coat (MMU604)
The Pillbox - our E-Marked Street Legal Micro LED License Plate Light - 6061 Billet Aluminium and 120cm of wiring cable with 3.9mm bullet connector terminals

The Number plate itself mounts to Axle Plate Bracket using counter sunk screws which are provided - the plate has counter sunk holes at various levels so you can set it at a suitable height for the size of your number plate on your bike.

The Pillbox Light is designed to Plug and Play directly into any Motone rear wiring loom plug and play adapters

For Example this one DDM016 for the BOBBER/Speedmaster/Scramber 1200/Speed Twin 1200 Eur4

MC PART ID: MMU607+MMU604+MLP001

MOTONE SIDEKICK (AXLE-MOUNT) SIDE MOUNT NUMBER PLATE KIT (NO TAIL LIGHT VERSION) - HORIZONTAL PLATE

MOTONE POINTS ACG COVER/BADGE - UNION JACK - BLACK/POLISH CONTRAST FINISH

$ 1,130.00

Motone Quality - HIGH PRESSURE PRECISION DIE CAST

This cover is for the ACG (What was once known as the "Points" Cover on the Vintage Meriden Triumphs) - The smaller of the two round engine covers. Clutch Side Badges/Covers are also available.

Wrinkle Black Paint with Contrast Mirror Polished Outer Surface

Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today: Street Twin, Street Cup, Street Scrambler, Scrambler 1200, Bonneville Bobber, T100 , T120, Thruxton, Speedmaster, Speed Twin

MC PART ID: MMU021