REV'IT! SUMMER SALE!

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Waterproof hooded softshell jacket

The Afterburn H2O is the perfect example of a garment that mixes up the Sport and Urban vibe to become the perfect everyday riding motorcycle jacket. The hydratex®|mesh G-liner ensures a dry arrival at your destination, while a detachable thermal liner and ventilation zippers allow for climate control depending on the temperature. Our ultra-thin, yet motorcycle-ready CE-rated SEESMART™ armor comes standard at the shoulders and elbows, and the safety quotient can be upgraded by installing our CE-level 2 SEESOFT™ back protector insert. With two front pockets and an inner pocket, the Afterburn H2O motorcycle jacket allows you to keep your essentials close, and the incorporated connection zipper allows you to zip the motorcycle jacket into virtually any REV’IT! trousers, even our riding jeans when using our Safeway belt.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Waterproof hooded softshell jacket

The Afterburn H2O is the perfect example of a garment that mixes up the Sport and Urban vibe to become the perfect everyday riding motorcycle jacket. The hydratex®|mesh G-liner ensures a dry arrival at your destination, while a detachable thermal liner and ventilation zippers allow for climate control depending on the temperature. Our ultra-thin, yet motorcycle-ready CE-rated SEESMART™ armor comes standard at the shoulders and elbows, and the safety quotient can be upgraded by installing our CE-level 2 SEESOFT™ back protector insert. With two front pockets and an inner pocket, the Afterburn H2O motorcycle jacket allows you to keep your essentials close, and the incorporated connection zipper allows you to zip the motorcycle jacket into virtually any REV’IT! trousers, even our riding jeans when using our Safeway belt.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

The Toronto H2O motorcycle jacket is a technical, high-performance garment that enables you to blend into urban life seamlessly the moment you get off your motorcycle or scooter. You can wear this jacket over your everyday business attire and nobody will even notice you’re wearing protective motorcycle gear.

The Toronto H2O is made of a PWR|Shell 500D 2 and incorporates a hydratex|Mesh G-liner construction to make it waterproof. It also houses our proprietary, comfortable, lightweight, and ventilated SEESMART CE-level 1 armor at the elbows and shoulders. There’s also an insert to accommodate the additional SEESOFT CE-level 2 back protector in case you are looking for an upgrade.

You’ll find enough waterproof pockets to store everything you need on your daily commute, keeping those items important to you dry when the weather doesn’t want to cooperate. Furthermore, an adjustment zipper at the waist and tabs at the cuff make it possible to tailor the fit to your body. Laminated reflection on the back of the detachable hood is added for extra visibility. The full-sleeve detachable thermal liner will keep you warm during colder days but can be removed when it gets warmer outside. The thermal liner is also separately wearable and reversible – inside out, outside in.

Look great and stay dry with the Toronto H2O motorcycle jacket.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Stay casual while you ride with the Parabolica stretch jacket.

For many urban riders, comfort of moto gear ranks pretty highly on the requirements list. Something that allows for freedom of movement, looks great and has a good vibe to it. Well, that sums up the Parabolica motorcycle jacket nicely.

It comes with a clean yet angularly cut construction, handy front pockets, and a fixed hood (complete with a snap button to hold it down when riding). Furthermore, its stretch characteristics give you that flexibility you need in a sport bike fit garment.

Feel good – and look good - out on the road on any of your city rides with the Parabolica motorcycle jacket

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Meet the Afterburn H2O Ladies jacket. Created with a female-specific fit, this Sport-inspired Urban jacket has clean lines, a timeless look, and all the right safety components that help riders stay safe. SEESMART™ CE-rated armor comes standard at the elbows and shoulders, while there’s also an option to upgrade the safety element by adding REV'IT!'s CE-level 2 SEESOFT™ back protector insert. The hydratex®|mesh G-liner ensures a dry arrival at your destination while the climate control comes from the option to take out the thermal liner and open the ventilation zippers. Furthermore, the incorporated connection zipper makes sure you can fasten the Afterburn H2O Ladies jacket onto virtually any REV’IT! trousers, including riding jeans when using one of our Safeway belts. For added convenience and style, the Afterburn H2O Ladies comes with a detachable hood.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

Lightweight. Ventilated. Ready for action. Created using CE-certified fabrics yet inspired by the archetypal MX jersey - but more protective, of course – the Sierra jersey is durable, robust, and perfect for warm-weather adventures. As a part of our DIRT Series collection, we’ve made sure its body is constructed with the strong PWR|Mesh fabric, allowing for optimal ventilation and abrasion resistance. PWR|Stretch ripstop is used on the arms and at the shoulders for increased durability and protection. Because of the Sierra’s active fit, it can easily be worn on top of our body-hugging Proteus protector jacket; which includes CE-level 2 armor at the back, shoulders and elbows and CE-level 1 at the chest. Adding to its already functional form, thumb loops on the cuffs will prevent the sleeves from sliding up when putting it on, and while riding. The chest pocket also features a goggle wiper to help keep the rider’s goggles clean.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Regular fit, super comfortable, timeless riding jeans

Regular fit motorcycle jeans for women

CE-rated SEESMART™ knee protectors included

Cordura® denim offers abrasion resistance

Triple needle stitching and safety stitching 

The Madison Ladies 2 are the perfect jeans for ladies who want the look and feel of their everyday jeans without additional bulk for safety. These Cordura® denim jeans offer abrasion resistance that surpasses the combination of regular denim and aramid, while providing the comfort of a single layer pair of jeans. The comfort seat and mechanical stretch of the material add even more freedom to your ride, ensuring you don't have to stop until you run out of gas. Triple needle stitching and safety stitching demonstrate that these jeans mean business when it comes to offering protection, just like our brand new CE-rated SEESMART™ protectors do. The Madison 2 Ladies comes standard equipped with knee protection, while adding the optional hip protectors is an easy task thanks to the prepared pockets.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

High-waisted motorcycle denim for women

Designed with a female specific fit

Comfortable, flexible, with CE-rated armor

Perfect for on and off the bike

Rev'it's denim collection offers the fit and feel of everyday jeans while providing motorcycle-ready protection, regardless of your preference in washing or fit. The Victoria Ladies SF jeans take on a slim fit, high-waist construction for female riders who want to carry their personal style onto two wheels. Available in black, dark blue, and light blue, the Victoria Ladies can be combined with various styles of jackets without sacrificing continual protection. Stretch Cordura® denim combined with our in-house developed PWR|shield – a highly abrasion-resistant knit - gives you all the comfort of your everyday stretch jeans, and the added benefit of peace of mind in case a ride ends in a less fortunate manner. Adding to the protective aspect, Rev'it! has incorporated their CE-rated SEESMART™ protectors at the hips and knees, which remain unnoticed when riding thanks to their ultra-thin construction, yet make a world of difference in case of a crash. Use the Victoria Ladies jeans in combination with our Safeway belt, and you’ll be able to zip onto virtually any REV’IT! jacket using the short connection zipper.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

High-end style, motorcycle-ready pants for the urban rider.

The Thorium TF motorcycle pants are inspired by the sporty tech wear that you see more and more in the urban environment. The style of these pants accentuate the aesthetics of your “dark side” when wearing other items from our DARK Collection. Next to the expressive tapered silhouette, these pants have a high-end look and feel. They are here to make a bold fashion statement and won’t apologize for it.

The Thorium is unique in its own right and super comfortable. You’ll likely forget that you’re wearing a CE-certified riding garment. But make no mistake, the Thorium TF pants are protective and offer unsurpassed tear and abrasion resistance. The inside of the leg has blue reflective tape so this will add an extra touch of detail to your look.

The black hue and tapered fit is so easy to combine with all the tech wear inspired gear in your closet. Stand out and show your dark side with the Thorium TF motorcycle pants.

For the riders out there who like their shoes to be both comfortable and protective.

These fashionable Ginza 3 motorcycle shoes have the potential to match with almost anything in your motorcycle wardrobe, whether you wear them on the bike or not. The Ginza 3 shoes have an improved fit and easier break-in period for those in love with this style. As you wear them, the leather will mold to your feet, creating an increasingly personalized fit over time.

A thermoformed heel and toe cup is combined with injected ankle cups on both sides of the ankle are all incorporated in a beautiful leather outer shell that is put together to meet and exceed CE standards. The OrthoLite® insole is there to provide comfort, whether it’s on longer rides or a casual stroll down the sidewalk.

Multiple color options all yield the same result: optimal comfort and motorcycle-ready protection to those who love to own one shoe that does it all. That’s the Ginza 3.

Developed for the rider looking for durability and quality with a hint of heritage look and feel.

With the Portland Ladies motorcycle shoes, we created a sturdy but female-focused product for riders looking for durability and quality. The Portland Ladies shoes take the form and details of a traditional worker-style boot. Then, hand-stitched details and a small reflective piece at the heel show that traditional styling and modern details go hand-in-hand when looking your next favorite pair of shoes; matching almost anything in your wardrobe.

The thermoformed heel and toe cups, as well as the injected ankle cups that - together with a strong exterior - create the resumé of safety features that measure up to CE requirements for protective footwear. Thanks to the OrthoLite® insole, the Portland Ladies will become the shoes of choice for female riders, both on and off the bike. Furthermore, they have been created with a female fit to offer optimal proportions.

Lace up with both style and safety with the Portland Ladies motorcycle shoes

Developed for the rider looking for durability and quality with a hint of heritage look and feel.

With the Portland Ladies motorcycle shoes, we created a sturdy but female-focused product for riders looking for durability and quality. The Portland Ladies shoes take the form and details of a traditional worker-style boot. Then, hand-stitched details and a small reflective piece at the heel show that traditional styling and modern details go hand-in-hand when looking your next favorite pair of shoes; matching almost anything in your wardrobe.

The thermoformed heel and toe cups, as well as the injected ankle cups that - together with a strong exterior - create the resumé of safety features that measure up to CE requirements for protective footwear. Thanks to the OrthoLite® insole, the Portland Ladies will become the shoes of choice for female riders, both on and off the bike. Furthermore, they have been created with a female fit to offer optimal proportions.

Lace up with both style and safety with the Portland Ladies motorcycle shoes

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Comfortable, highly breathable, laminated waterproof touring boots

The Quest OutDry Ladies Boots highlight our goal to offer serious touring products to everyone, male or female. They are built with rugged materials and quality components that last. The special Vibram® Mile sole offers safety, control and comfort both on and off your bike. A breathable OutDry® waterproof barrier is laminated directly to the outer shell, which means water won’t enter and the boot itself does not pick up water. We installed a reinforced zipper for long lasting performance, and the 3D mesh lining and the elastic inserts at the calf and ankle contribute to the overall feeling of comfort that you’ll find in these boots. 

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

The perfect glove for summer riding

Leather wrapped hard-shell knuckle protection

Excellent freedom of movement due to stretch

PWR|shield knit added for extra safety

The perfect blend of style and function, this short, fully perforated leather summer glove incorporates a variety of protective features. Made from supple yet durable goat skin, the Monster 2 glove offers comfort, while TPR finger knuckle protectors and a leather-wrapped hard-shell knuckle provide adequate impact protection. Stretch areas ensure excellent freedom of movement.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Long-cuffed, comfortable, multi-purpose waterproof winter gloves

All weather protection for a competitive price

Comfortable and protective on and off the bike

100% waterproof hydratex®|Z-liner membrane

Warm and comfortable lining

There’s beauty in simplicity and the Upton H2O Ladies gloves combine both in a sleek and elegant package. They’ve been designed to adapt to various weather conditions and keep your hands warm when you feel like going for a ride despite ominous weather.

Engineered with the female-specific fitting pattern, they provide ultimate comfort when you slip a pair on.

Making them so warm is the inclusion of THERMOLITE® insulation. This way, your hands stay toasty but you don’t lose out on grip on your handlebars. Additionally, a high loft fur lining adds to the overall comfort of the gloves.

In terms of keeping your hands dry when it starts to rain, we have you covered. We’ve included a hydratex®|Z-liner membrane to make sure your waterproofing needs are met. 

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

The Nitric 3 H2O Rain jacket has been designed as a classic overcoat. It can be worn over any leather or textile jacket, overshirt, or any other protective motorcycle clothing. The robust hydratex|Lite outer shell is 100% waterproof while remaining breathable. An included mesh lining further reinforces the jacket’s durability and its longevity. There’s sufficient waterproof storage on the outside of the jacket, provided by two big front pockets.

The reflective prints on the front, back, and arms provide visibility during heavy downpours or night time riding. And the adjustability straps on the waist and arms ensure that it has a more tailored fit over your motorcycle jacket. When the weather clears up it is very easy to take off and pack up tightly into a compact bag that is supplied with the jacket.

Put on the Nitric 3 H2O rain jacket if it is raining or take it with you when the weather is unpredictable, it will make sure you get to your destination dry and comfortable.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Stripped-down, no-nonsense, lightweight over-the-jacket rain jacket for all riders.

Year-round riding means that, chances are, at some point you’ll end up riding in the rain. The Cyclone 3 H2O could be your 'day saver.’ This ultra-lightweight rain jacket with comes with our hydratex |Lite outer shell and is 100% waterproof. It easily fits over any riding jacket in case you find yourself caught in a downpour. You can adjust it to have a more tailored fit to your body thanks to the adjustment straps on the arms and wrists.

Laminated reflection is found on the upper arms, as well as the shield logos at chest and back to make sure you are visible even in the most adverse conditions – whether that’s in the dark of the night or in a storm. Thanks to its compact profile, it folds neatly into its own carrying package for transportation when not in use.

Don’t leave home without a back-up plan, the Cyclone 3 H2O rain jacket will keep you dry and comfortable in case of bad weather.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Short-cuffed, fully ventilated, mesh urban sport gloves

Like the Spectrum gloves set a new standard in terms of comfort for spring, fall and (urban) winter use, the Kinetic gloves redefine the standard when it comes to summer gloves. The graphic designs range from muted ton-sur-ton colorways to more vibrant variants. That’s why these gloves will appeal to both adventure bike riders as well as urban sport riders, and everything in between. By incorporating a new type of lightweight, high-quality knitting technology, we have managed to not only create a completely different look but – even more importantly – a pair of gloves with a unique feel. This technology is only suitable for summer gloves and simply takes airflow to the next level. Besides airflow, everything about this glove screams comfort. With a neoprene cuff and stretch at the fingers and back hand, it will be no problem to comfortably enjoy a full day of hot weather riding. And make no mistake, these gloves are fully certified according to the latest CE motorcycle gloves standard. The injected, flexible knuckle protection element and Temperfoam® shock absorbing insert panels add to the overall safety and comfort level of the wearer. Also, here, the Connect Finger Tip feature allows you to keep your gloves on when using any type of touchscreen device.

Adjustability

• Adjustment strap at wrist: The hook-and-loop adjustment strap at the wrist allows for optimum adjustability and fit when using our gloves. Find the ideal tightness and comfort every time it is used.
• Stretch at fingers
• Stretch fabric on back of hand

Closure

• Hook-and-loop closure

Lining

• Tricot liner: Thanks to its unique close knit weave pattern Tricot is smooth on one side, while sporting texture on the other side. This makes it sturdy and soft—ideal to use in a comfortable and durable liner that will hold its shape for a very long time.

Features

• Connect Finger Tip: Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
• Grip panel at palm: This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.
• Pull tab: Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
• Short cuff

Protection

• Injected flex knuckle: This knuckle protection is injected in the upper material which makes it very flexible and abrasion resistant. Due to its structure it ventilates very well while keeping you safe.
• PWR|Shield at palm: PWR|Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance levels. This product is equipped with PWR|Shield at the palm.
• Temperfoam® finger knuckles: The self-contouring foam is used in areas where mobility and fit are a must, like the finger knuckles. Temperfoam® comes in a solid version as well as a perforated version.
• Temperfoam® knuckle
• Temperfoam® palm slider
• Temperfoam® thumb knuckle

• Automan stretch: Another type of stretch fabric, Automan is used to maintain protection while riding, but with a form-fitting and elastic silhouette that maximizes comfort.
• Connect finger tip fabric: Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
• Goatskin with WR finish: Tanned leather made from goatskin is considered extremely durable, and is often used for gloves and other products that require a soft hide. Goatskin with a WR finish has undergone a process that makes it water-repellent and soil-resistant. The WR coating is bonded to the fabric at the molecular level, enhancing the material's natural water-repellence and soil-resistance, without altering how the fabric looks, feels, or breathes.
• neoprene: Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
• PWR|Knit: PWR|knit is created through a unique technique that uses 100% high-performance polyamide yarns which are knitted together. The result is a cut, tear, and abrasion resistant fabric that feels extremely comfortable and soft.

CERTIFICATION

• These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating. For more details about certification click here.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Ventilated, top-spec gloves for touring and adventure riders

Gloves for women who want to ride far!

For touring and off-road adventures

Right balance of protection & ventilation

Designed with a female specific fit 

The Dirt 3 Ladies gloves meet the demands of many serious female touring and adventure riders across the globe, offering an optimal balance between protection and ventilation. Your hands will be well armored thanks to the TPR knuckle, TPR palm slider, and TPR finger knuckles. The incorporated Connect Finger Tip allows for the operation of touchscreen devices without removing the glove, making this adventure-ready package complete. Venture further knowing your hands are protected.

Short-cuffed, lightweight and ventilated adventure riding gloves with hard knuckle

For serious touring and adventure riders

Loaded with safety technology

Perfect balance of protection and ventilation

Connect Finger Tip for touchscreen operation

Our Dirt 3 gloves have been created to meet the serious demands of touring and adventure riders across the globe. We’ve made sure they combine the ideal balance of protection and ventilation, whether you’re on or off-road. In terms of protection, these gloves keep hands well armored thanks to the inclusion of a TPR hard shell knuckle, a TPR palm slider, TPR finger knuckles, PWR|shield knit at the palm, Temperfoam® finger knuckles, a Temperfoam® thumb knuckle and Temperfoam® underneath the knuckle. Furthermore, ventialtion panels are found at the fingers, thumb and back of the hand. To keep things functional, we’ve included the Connect Finger Tip, a feature that allows riders to operate touchscreens (GPS, smartphones, etc.) without the inconvenience of taking the gloves off. And to make sure you have the perfect fit, the adjustment tab at the cuff is there for your comfort and convenience.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Thin, effective, undergloves for summer or winter use for additional warmth.

The Baret GTX INFINIUM™ motorcycle undergloves with included GORE-TEX INFINIUM™ WINDSTOPPER® technology offer riders warmth and comfort without sacrificing feel or control. They provide an extra line of defense against the elements and have four-way stretch for ultimate freedom of movement and versatility.

These motorcycle gloves are contoured to the anatomy of your hands and are designed to be used under your Summer or warm-weather hand protection. They also give you the flexibility to keep wearing your favorite pair of motorcycle gloves in the Winter or during those early morning rides when it’s still cold outside. The slim and snug cuff construction will not move while riding and there is a reflective logo at the back of the hand.

And an additional layer of warmth without the bulk with the Baret GTX INFINIUM™ motorcycle undergloves

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

Although the Sand 4 gloves have been designed to create a perfect match with the Sand 4 H2O outfit, these gloves are bound to become the go-to gloves for a large audience of adventure riders across the globe. This pair of hand protection has been specifically designed and engineered for summer use, providing optimal grip, breathability, and ventilation. To make sure your hands stay cool and dry during hot summer rides, the gloves are constructed of strong and abrasion-resistant mesh stretch fabrics combined with a high-tech TPR knuckle protector that is designed to direct the airflow into the glove and onto the hands of the rider. Multiple perforation holes on the outside and inside increase the breathability even more. For additional protection, we added TPR protectors on the fingers and thumbs; providing a high level of protection without compromising comfort or flexibility. A TPR palm slider ensures a controlled slide in case of an unfortunate mishap. The gloves can easily be put on thanks to the handy pull tab on the cuff and then secured with the hook-and-loop wrist strap. Adjusting your route during your journey is a breeze thanks to the integrated Connect Finger Tip which makes it possible to control your touchscreen device while leaving your gloves on. Enjoy the summer breeze with the Sand 4 gloves.

Features

Connect Finger Tip
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.

Grip panel at palm
This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.

Outside stitching
The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.

Pull tab
Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone

Regular cuff

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

Although the Sand 4 gloves have been designed to create a perfect match with the Sand 4 H2O outfit, these gloves are bound to become the go-to gloves for a large audience of adventure riders across the globe. This pair of hand protection has been specifically designed and engineered for summer use, providing optimal grip, breathability, and ventilation. To make sure your hands stay cool and dry during hot summer rides, the gloves are constructed of strong and abrasion-resistant mesh stretch fabrics combined with a high-tech TPR knuckle protector that is designed to direct the airflow into the glove and onto the hands of the rider. Multiple perforation holes on the outside and inside increase the breathability even more. For additional protection, we added TPR protectors on the fingers and thumbs; providing a high level of protection without compromising comfort or flexibility. A TPR palm slider ensures a controlled slide in case of an unfortunate mishap. The gloves can easily be put on thanks to the handy pull tab on the cuff and then secured with the hook-and-loop wrist strap. Adjusting your route during your journey is a breeze thanks to the integrated Connect Finger Tip which makes it possible to control your touchscreen device while leaving your gloves on. Enjoy the summer breeze with the Sand 4 gloves.

Features

Connect Finger Tip
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.

Grip panel at palm
This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.

Outside stitching
The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.

Pull tab
Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone

Regular cuff

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

For many years, the Sand outfit has been the go-to choice for female riders looking for a rugged and versatile jacket and pants combination that is fully prepared to take on any challenging adventure on or off-road. Hot, wet, or cold weather will not stop you from reaching your destination, wherever the road may lead you. The Sand 4 H2O Ladies is the ultimate women’s adventure riding jacket. The tough yet lightweight, abrasion-resistant outer shell is engineered to last a multitude of around-the-world trips and is designed to provide excellent freedom of movement for the most demanding and technical riding situations. For maximum impact protection, the Sand 4 H2O Ladies includes our award-winning, industry-leading SEEFLEX™ CE-level 2 protectors at the shoulders and elbows. It also comes prepared for the optional and equally impressive SEESOFT™ CE-level 2 insert back protector. You’re ready to tackle any challenge with this jacket. When we say the Sand 4 H2O Ladies jacket is versatile, we mean that it is prepared for any climate you might encounter, and that it allows you to configurate it in the best possible way to ensure maximum comfort. Every layer is removable and separately wearable, from the waterproof hydratex® membrane to the insulated winter lining. Changing seasons or weather conditions won’t deter you from getting on your bike, you’re ready for it all. Multiple adjustment straps and tabs on the arms, and variable height adjustment straps at the waist will ensure the perfect fit to your body with or without the liners installed. If you are looking for airflow, this jacket has plenty of options that allow you to regulate the amount of wind that blows towards your body. The main front zipper can be zipped open to reveal a mesh ventilation panel that enables cool air to travel into the jacket. At the front, we have 2 ventilation panels which can be held open by a special tab connected to a press button on the outside of the jacket. With all 3 front ventilation panels open, in combination with the 2 rear-vent zippers, they will create an incredible amount of airflow through the entire jacket. Combined with the multiple ventilation zippers running across the arms, this jacket will keep you cool and comfortable in higher temperatures. The 2 front pockets, big rear pocket and 2 inner pockets provide ample storage space so you can bring all your essentials along for the ride, and keep them close. The back pocket is even large enough to store the liners when not in use. All the outside pockets can be closed with zippers to make sure you will not lose your valuable possessions during the ride. Durable, versatile and practical. The highest specifications regarding tear, cut and abrasion resistance and top-notch impact armor. The Sand 4 H2O Ladies jacket has it all and is ready for your next ride around the world.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

Although the Sand 4 Ladies gloves have been designed to create a perfect match with the Sand 4 H2O Ladies outfit, these gloves are bound to become the go-to gloves for a large audience of female adventure riders across the globe. These are not just smaller versions of the men’s model, but have been specifically designed using our female-specific fit glove pattern. These gloves have been specifically designed and engineered for summer use, providing optimal grip, breathability, and ventilation. To make sure your hands stay cool and dry during hot summer rides, the gloves are constructed of strong and abrasion-resistant mesh stretch fabrics combined with a high-tech TPR knuckle protector that is designed to direct the airflow into the glove and onto the hands of the rider. Multiple perforation holes on the outside and inside increase the breathability even more. For additional protection, we added TPR protectors on the fingers and thumbs; providing a high level of protection without compromising on comfort or flexibility. A TPR palm slider ensures a controlled slide in case of an unfortunate mishap. The gloves can easily be put on thanks to the handy pull tab on the cuff and then secured with the hook-and-loop wrist strap. Adjusting your route during your journey is a breeze thanks to the integrated Connect Finger Tip which makes it possible to control your touchscreen device while leaving your gloves on. Enjoy the summer breeze with the Sand 4 Ladies gloves.

Features

Connect Finger Tip
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.

Grip panel at palm
This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.

Outside stitching
The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.

Pull tab
Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone

Regular cuff

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada. 

Waterproof overpants for commuting and touring.

A top-spec, waterproof, CORIUM+® laminated leather/textile jacket for multi-season on-road touring.

The Valve H2O is our fully loaded touring jacket prepared for asphalt adventures in any season. Thanks to the combination of waterproof CORIUM+® leather on the arms and the breathable 3L CORIUM+® textile laminate on the body of the motorcycle jacket, you are always fully protected from the elements. A detachable thermal liner will keep you warm while riding in colder temperatures. And to improve your comfort level even more, we added a detachable storm collar to keep away the wind and rain from your neck.

When the temperatures start to rise while riding, you can easily direct cool air to your upper body with the help of our VCS|Aquadefence ventilation system. Just open up the flaps on the chest and secure them with the magnetic Fidlock® system. All of this can be done with one hand while riding. By opening the ventilation zippers on the back, the warm air from inside the jacket can easily escape, helping to keep your upper body at the ideal temperature.

Rain or shine, cold or warm, it doesn’t really matter. The Valve H2O motorcycle jacket will get you to your destination in comfort.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

Top-spec, waterproof, CORIUM+® laminated leather/textile pants for multi-season on-road touring.

Take on any asphalt adventure in any weather with the high-tech and versatile Valve H2O motorcycle pants. We took our time when it came to the design of the Valve H2O pants; to make sure they were created and suitable for all-season riding. Thanks to the combination of waterproof CORIUM+® leather on the hips, knees, and rear and the breathable 3L hydratex waterproof laminate on the body of the pants, you are always fully protected from bad weather.

A detachable thermal liner will keep you warm while riding in colder temperatures. On warmer days you can easily direct cool air to your upper legs with the help of our VCS|Aquadefence system. Just open up the flaps on the legs and secure them with the magnetic Fidlock® system. All of this can be done with one hand, with gloves on, while riding. Don’t compromise comfort and protection during your next touring adventure.

The Valve H2O motorcycle pants will keep fully protected from the elements during every minute of your adventure tour ride, and help to keep you safe at the same time.

Classic D-pocket buffalo leather jacket for Heritage-inspired riders.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada

Protective riding chinos for the fashionable urban rider.

Comfort is an important feature no matter what you’re wearing so we added the Dean SF to our riding motorcycle trousers collection. We took all the characteristics of a normal chino (including a slim fit) and developed this into 100% motorcycle-ready pair of pants. Pants that you’ll enjoy wearing even if you don’t throw your leg over a bike.

Don’t be deceived by their casual looks though, these trousers are made out of our signature CORDURA® fabric. They offer unsurpassed tear and abrasion resistance to help keep you safe on the road. The inside of the leg also has blue reflective tape; adding a nice touch of detail to your look. They come in a lighter or darker neutral color so they can easily be combined with almost any item from your wardrobe.

Stylish chinos plus motorcycle-ready protection = the Dean SF motorcycle trousers.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada

Protective, worker-inspired pants for the fashionable urban rider.

In the current fashion market, denim brands are again widely adopting colored pants. The Davis TF motorcycle jeans are easy to combine with different kinds of jackets (whether textile or leather) and complete your look if you’re in the market for something more diverse and interesting.

These pants have nice details, for example, square pocketing, knee patches, and stitched pockets on the waistline. So you’ll have the archetype elements from the past, but with a fit that follows today’s fashion.

Stand out and wear your style with pride with the Davis TF motorcycle jeans

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, leather/textile mix, ventilated off-road gloves

The Caliber gloves (as part of the DIRT Series collection) feel perfectly at home on or off-road. Why? Because this snug-fitting pair of hand protectors combine the best of both leather and mesh. In order to keep your hands safe, these CE-certified gloves incorporate PWR|Shield fabric at the palm for maximum abrasion resistance. The top of the gloves are constructed with well-ventilated PWR|Stretch mesh and flexible TPR protection is found on the fingers and knuckles. This combination – along with stretch in all the right places - provides optimal freedom of movement and the armor necessary to keep your hands safe whether riding on the asphalt or exploring off the beaten path. Additionally, the comfortable neoprene cuff will keep dust and water out of the gloves.

Adjustability

• Stretch at fingers
• Stretch at thumb
• Stretch fabric on back of hand

Closure

• Hook-and-loop closure
• Wrist strap

Lining

• Tri-fleece liner: This polyester tricot fabric is used for glove lining, and brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp.

Features

• Connect Finger Tip: Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
• Grip patch at palm: A grip patch is made with a texturized pattern to deliver a superb grip performance.
• Outside stitching: The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.
• Pull tab: Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
• Regular cuff

• Ventilation: Ventilation holes

Protection

• Injected ventilated flex knuckle: This knuckle protection is injected in the upper material which makes it very flexible and abrasion resistant. Due to its structure it ventilates very well while keeping you safe.
• Outseam stitching by Guterman: Marketing calls it PWR yarn
• PWR|Shield at palm: PWR|Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance levels. This product is equipped with PWR|Shield at the palm.
• Temperfoam® knuckle
• Temperfoam® palm slider
• Temperfoam® thumb knuckle
• TPR finger knuckles

Outer shell material

• Connect finger tip fabric: Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
• Corduroy
• Goatskin: Tanned leather made from goatskin is considered extremely durable, and is often used for gloves and other products that require a soft hide.
• Neoprene: Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
• PWR|Stretch mesh

Certification

• These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating. For more details about certification click here.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Multi-season leather jacket with high standards of protection

Skinny Fit, regular waist, protective jeans for the fashionable urban female rider.

For the Marley Ladies SK motorcycle jeans, we managed to keep a sleek and slender silhouette without compromising safety features. Wearing this pair of riding denim will likely confuse onlookers. They’ll be wondering whether you’re in streetwear or fashionable protective clothing. The answer is the latter!

The stretch material offers flexibility and makes them comfortable when going on longer rides. Furthermore, these skinny jeans are style-centric and very rich when it comes to details. They’re considered to be the “skinniest” Skinny Fit motorcycle jeans that we offer in our women’s denim lineup.

The Marley Ladies comes in a medium blue wash and can be combined with a plethora of different colored shoes or jackets, depending on your personal preference. The regular waist offers enough protection around the back and backside and offers a feminine silhouette.

For women looking for a true Skinny Fit riding denim with all the right protective features in a sleek package, look no further than the Marley Ladies SK motorcycle jeans.

 NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Durable and seamlessly adjustable webbed belt

Don’t get caught with your pants down. It’s possibly dangerous and it is definitely uncomfortable. And with the Heron belt it’s also entirely preventable. Made to complement our new belt loops-equipped Adventure Travel pant, the Heron belt has a durable polyamide strap and an alloy buckle, and is designed to be lightweight with ease of use built in. The Heron webbed belt allows you to get perfect fit every time you put it on. Infinite adjustability Belts shouldn’t be too tight and of course not too loose either. It’s the exact reason why the webbed belt design has been a staple in the armed forces and the outdoor scene for decades. You get infinite adjustability without being limited by the notches you find on the more traditional belt designs. Strapping things up is a seamless affair. A strategically broad strap helps keep your pants up with the just right amount of tension, giving you security and comfort without unnecessary constriction. Because who wants to worry about something as utilitarian as a belt? Just know that with the Heron, you don’t have to.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight, rugged, minimalistic 15L waterproof backpack riding backpack.

Developed together with luggage experts, Kriega, the Stack 15L H2O backpack is ready to take on any journey to any destination. The easy access waterproof roll-top main body offers 15 litres of space for your personal items. The ripstop main compartment also has a small internal zip-access pocket for convenient access to your most valuable items like a phone or wallet. Behind the waterproof liner of the main compartment, you’re able to add a 3.75L Hydration Reservoir (sold separately) to keep you hydrated while riding or at your destination.

The Stack 15L H2O features the innovative Kriega Quadloc-Lite™ harness, which transfers weight from the shoulders to the chest and upper body, providing all-day riding comfort, even with the backpack fully loaded. The removable waist strap offers even more stability when riding. To prevent unwanted friction and heat generation on your back, it comes with an air-mesh back panel for additional rider comfort.

With the clean-looking Stack 15L H2O backpack, you can take your essentials along for the ride while keeping them protected from the elements. No matter what you carry, you are not compromising your comfort while traveling from A to B.

• Dimensions: 480(h) x 240(w) x 140(d) mm / 18.8"(h) x 9.4"(w) x 5.5"(d)
• Volume: 15 Litres (970 cu in) total capacity
• Weight: 1346 grams

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Comfortable, easy on/off, adjustable, CE-certified neck brace

Protect your neck with the Segur neck brace. Wearing a neck brace has been proven to significantly reduce neck injuries by protecting the cervical vertebrae of the spine against the force of an impact. Our Segur neck brace helps to reduce possible neck injuries caused by hyper-flexion, hyper-extension, axial load, shear load, lateral hyper-flexion and whiplash by limiting rotation and transferring excessive load from the neck to the rest of the body. Its lightweight and versatile construction comes with various useful features for rider security and protection. It is fully adjustable, and to ensure maximum comfort, the size of the neck brace can be changed with the side adjustment system. The lateral profile and chest fitment can be adjusted by mounting the supplied EVA foam padding. Because of the low-profile back section, it doesn’t interfere with the rider’s helmet. The Segur can also be easily opened and closed with the high-quality metal front fastening system. The adjustable back column of this neck brace is foldable so takes up much less space when not in use. The neck brace comes with a storage bag for its protection when it’s not being used or for during transport. The Segur conveniently attaches to a selection of REV'IT! jackets with the dedicated connection kit that comes in the package. Or it can be worn on its own with the supplied harness. Stay safe out there!

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

The right line of defence is needed to protect a rider from the elements, allowing them to keep moving forward despite what the weather is doing. We have the ideal solution for off-road riders: The Barrier rain smock. As part of our DIRT Series collection, the Barrier blocks rain, wind, and mud to keep those wearing it dry and comfortable. Furthermore, the lightweight Hydratex®|Lite rain smock is fully waterproof thanks to the PU-coated ripstop fabric. But the Barrier’s versatility doesn’t stop there. On days where weather patterns fluctuate frequently, this active-fitting smock can easily be taken off or put on without the removal of your helmet thanks to its extra-long zipper. When packing it away, store it in the included compact bag that comes with the jacket. It’s as easy as that.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

• Insulated, long-leg base layer
• Breathable 
• Insulating / Keeps you warm
• Direct-to-skin

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

CE-certified, ventilated, mesh off-road/MX jacket

 NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, Windbreaking, softshell, off-road riding jacket with removable sleeves

The Continent WB jacket is a tactical, high-tech, adventure-ready jacket as part of our DIRT Series, but there’s much more to it than meets the eye. Engineered with serious adventure riding in mind, the Continent WB is made to adapt as conditions change.

For when the going gets rough
Designed and certified to be good to go, with SEESMART protection in charge of keeping your elbows and shoulders out of harm’s way and an insert pocket for a SEESOFT back protector, there’s also the possibility of removing the standard protection and slipping the Continent WB jacket over our CE-level 1 and Level 2 certified Proteus protector jacket for when the going gets rough.

Purposeful beyond looks and feel
Similarly, the full-stretch, softshell design looks and feels purposeful, but that’s before unzipping the sleeves for even more riding mobility and ventilation. Because the Continent WB is very much an in-between jacket, the removable sleeves are mated to the shoulders, as a comfortable double layer up top that comes off altogether, turning this mid-range temperature jacket into a full-blown, body-warming off-road riding vest in a matter of moments.

COMFORT FEATURES
Adjustability:
Adjustment drawcord at hem
Adjustment tab at cuffs
Pockets:
Inner pocket
Slit pocket at back
Two slit pockets on front
Features:
Detachable sleeves
Elastic key cord in pocket

CLIMATE FEATURES
Ventilation:
Perforation on upper front

PROTECTION FEATURES
Protection:
Prepared for SEESOFT™ CE-level 2 Insert Back Protector
SEESMART CE-level 1 Elbow Protectors
SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
CORDURA® 750D ripstop
Visibility:
Laminated reflection at upper arms
Laminated reflection on back
Laminated reflective logo on back

CERTIFICATION
This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating. For more details about certification click here.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

 NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, Windbreaking, softshell, off-road riding jacket with removable sleeves

The Continent WB jacket is a tactical, high-tech, adventure-ready jacket as part of our DIRT Series, but there’s much more to it than meets the eye. Engineered with serious adventure riding in mind, the Continent WB is made to adapt as conditions change.

For when the going gets rough
Designed and certified to be good to go, with SEESMART protection in charge of keeping your elbows and shoulders out of harm’s way and an insert pocket for a SEESOFT back protector, there’s also the possibility of removing the standard protection and slipping the Continent WB jacket over our CE-level 1 and Level 2 certified Proteus protector jacket for when the going gets rough.

Purposeful beyond looks and feel
Similarly, the full-stretch, softshell design looks and feels purposeful, but that’s before unzipping the sleeves for even more riding mobility and ventilation. Because the Continent WB is very much an in-between jacket, the removable sleeves are mated to the shoulders, as a comfortable double layer up top that comes off altogether, turning this mid-range temperature jacket into a full-blown, body-warming off-road riding vest in a matter of moments.

COMFORT FEATURES
Adjustability:
Adjustment drawcord at hem
Adjustment tab at cuffs
Pockets:
Inner pocket
Slit pocket at back
Two slit pockets on front
Features:
Detachable sleeves
Elastic key cord in pocket

CLIMATE FEATURES
Ventilation:
Perforation on upper front

PROTECTION FEATURES
Protection:
Prepared for SEESOFT™ CE-level 2 Insert Back Protector
SEESMART CE-level 1 Elbow Protectors
SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
CORDURA® 750D ripstop
Visibility:
Laminated reflection at upper arms
Laminated reflection on back
Laminated reflective logo on back

CERTIFICATION
This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating. For more details about certification click here.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, over-boot, off-road, lightweight, flexible riding pants

Enjoy endless off-road exploration on two wheels with our CE-certified and splash proof, active fit over-the-boot Continent hard shell pants – as part of our DIRT Series collection. On the inside of the legs and upper knees, the Continent has been engineered with the rugged abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch for maximum flexibility and comfort. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle. Protection is provided by our removable SEESMART™ CE-level 1 protectors at the hips and knees. Furthermore, the knee construction is designed to work with knee braces or our Scram knee protectors – with the SEESMART™ protectors first removed, of course. For convenience purposes, the upper legs are equipped with cargo pockets for added storage options, and ventilation zippers to cool the rider down. For the right fit, we’ve included a ratchet waist closure, along with a silicon waistband to keep the pants from sliding down. Additionally, the lower legs are equipped with a special gator that goes over the boot to block out water and mud.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, over-boot, off-road, lightweight, flexible riding pants

Enjoy endless off-road exploration on two wheels with our CE-certified and splash proof, active fit over-the-boot Continent hard shell pants – as part of our DIRT Series collection. On the inside of the legs and upper knees, the Continent has been engineered with the rugged abrasion-resistant Cordura® ripstop fabric combined with PWR|Shell ripstop stretch for maximum flexibility and comfort. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle. Protection is provided by our removable SEESMART™ CE-level 1 protectors at the hips and knees. Furthermore, the knee construction is designed to work with knee braces or our Scram knee protectors – with the SEESMART™ protectors first removed, of course. For convenience purposes, the upper legs are equipped with cargo pockets for added storage options, and ventilation zippers to cool the rider down. For the right fit, we’ve included a ratchet waist closure, along with a silicon waistband to keep the pants from sliding down. Additionally, the lower legs are equipped with a special gator that goes over the boot to block out water and mud.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, waterproof, knee brace-ready, lightweight off-road pants

Take on any adventure in any weather with our CE-certified and waterproof, active fit, over-the-boot Component H2O hard shell pants. The outer shell is made of the rugged abrasion-resistant CORDURA® ripstop fabric laminated with our waterproof hydratex® membrane. PWR|Shell Ripstop stretch is used on the inside of the legs and upper knees for maximum flexibility and comfort. Soft leather panels on the lower inside legs provide extra grip when standing on the motorcycle. A removable thermal liner will keep the rider comfortable and warm in lower temperatures. Protection is provided by our removable SEESMART™ CE-level 1 protectors at the hips and knees. Furthermore, the knee construction is designed to work with knee braces or our Scram knee protector sock – with the SEESMART™ protectors first removed, of course. For convenience purposes, the upper legs are equipped with cargo pockets as well as waterproof ventilation zippers to cool the rider down in warm weather. To get the right fit every time, we have equipped these pants with a ratchet waist closure, along with a silicon waistband to keep the pants from sliding down. Adjustment tabs on the calves provide plenty of adjustability to complement any type of motorcycle boots. A grip patch will ensure that the rider will not slide off the seat when it is wet or dry. Additionally, the lower legs are equipped with a special gator that goes over the boot to block out water and mud. Ride long and far with the Component H2O pants.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, waterproof, lightweight, comfortable, active fit off-road.

The evolution of a DIRT Series modern classic, the Component 2 H2O builds upon this pinnacle adventure jacket’s well-received, feature-driven design approach by making the stand-out details even better and adding another few for good measure.

Form and function in fashionable harmony
Inspired by designs used throughout the outdoor segment, it’s very much form and function in fashionable harmony. Not to say it’s a compromise – more the exact opposite. Its strategically matched, abrasion resistant Cordura® ripstop and PWR|Shell stretch ripstop materials give a hard-wearing, durable look to the Component 2 H2O’s actual tactical and lightweight characteristics. With 100% wind and waterproof, laminated hydratex, CE-level 1 SEESMART armor, and an added pouch to upgrade things with a CE-level 2 SEESOFT back protector, the Component 2 H2O pulls out all the stops.

Get your adventure on
With its removable hood, comfort-boosting neoprene collar, and ample ventilation, the Component 2 H2O is very much ready to hit the road. There’s still everything you need to take to the roads less traveled – or just leave the road altogether. Its active fit adds a casual, outdoor lifestyle feel, while the comfortably sizing has been primarily designed to slip over our Proteus protector jacket for when you’re really looking to get your adventure on.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, waterproof, lightweight, comfortable, active fit off-road.

The evolution of a DIRT Series modern classic, the Component 2 H2O builds upon this pinnacle adventure jacket’s well-received, feature-driven design approach by making the stand-out details even better and adding another few for good measure.

Form and function in fashionable harmony
Inspired by designs used throughout the outdoor segment, it’s very much form and function in fashionable harmony. Not to say it’s a compromise – more the exact opposite. Its strategically matched, abrasion resistant Cordura® ripstop and PWR|Shell stretch ripstop materials give a hard-wearing, durable look to the Component 2 H2O’s actual tactical and lightweight characteristics. With 100% wind and waterproof, laminated hydratex, CE-level 1 SEESMART armor, and an added pouch to upgrade things with a CE-level 2 SEESOFT back protector, the Component 2 H2O pulls out all the stops.

Get your adventure on
With its removable hood, comfort-boosting neoprene collar, and ample ventilation, the Component 2 H2O is very much ready to hit the road. There’s still everything you need to take to the roads less traveled – or just leave the road altogether. Its active fit adds a casual, outdoor lifestyle feel, while the comfortably sizing has been primarily designed to slip over our Proteus protector jacket for when you’re really looking to get your adventure on.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Fully functional aesthetics never looked this good. With a design borrowing heavily from the outdoor scene, the CE-certified motorcycle-ready Blackwater 2 H2O smock is all about looking purposeful as much as being purposeful. Inherent to the smock jacket concept, you put it on over your head, which is made easy with the addition of a side-entrance zipper. Keeping the front clean, and fully weatherproof.

Function-focused, fit for purpose
Regardless of the basic, function-focused approach, the Blackwater 2 H2O advances the motorcycle smock jacket concept with laminated, waterproof hydratex material, beefed-up abrasion resistance with Cordura® ripstop, and PWR|Shell stretch ripstop to secure wearing comfort and stretch.

Ready for pure-blooded adventure
Although it’s looks make intentions clear – it’s a pure-blooded off-road adventure jacket – the Blackwater 2 H2O is packed with CE-level 1 SEESMART protective armor at shoulders and elbows, and there’s a pouch ready to add an optional CE-level 2 SEESOFT back protector, assuring you’re safe when adventures take you across tarmac. When it’s time for serious off-road adventuring, the Blackwater 2 H2O is designed to be worn over our Proteus protector jacket. Just remember to take the standard shoulder and elbow armor out first to keep things fitting safely and comfortably.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Fully functional aesthetics never looked this good. With a design borrowing heavily from the outdoor scene, the CE-certified motorcycle-ready Blackwater 2 H2O smock is all about looking purposeful as much as being purposeful. Inherent to the smock jacket concept, you put it on over your head, which is made easy with the addition of a side-entrance zipper. Keeping the front clean, and fully weatherproof.

Function-focused, fit for purpose
Regardless of the basic, function-focused approach, the Blackwater 2 H2O advances the motorcycle smock jacket concept with laminated, waterproof hydratex material, beefed-up abrasion resistance with Cordura® ripstop, and PWR|Shell stretch ripstop to secure wearing comfort and stretch.

Ready for pure-blooded adventure
Although it’s looks make intentions clear – it’s a pure-blooded off-road adventure jacket – the Blackwater 2 H2O is packed with CE-level 1 SEESMART protective armor at shoulders and elbows, and there’s a pouch ready to add an optional CE-level 2 SEESOFT back protector, assuring you’re safe when adventures take you across tarmac. When it’s time for serious off-road adventuring, the Blackwater 2 H2O is designed to be worn over our Proteus protector jacket. Just remember to take the standard shoulder and elbow armor out first to keep things fitting safely and comfortably.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Leather bomber jacket with high levels of protection

The Travon’s timeless styling honors the heritage and historic journey of an undisputed design classic. Bomber jackets were originally designed to keep WWI pilots warm in breezy, open-air cockpits, but by 1927 had evolved into the classic we know and love – rib-knitted collar, waistband, and cuffs adding extra wind proofing and insulation. This new detailing also shaped the flattering bomber silhouette that’s reflected in the new REV’IT! Travon. Authentic crossover To date the lightest jacket we’ve ever made, the Travon features technology originally engineered for touring and adventure riding. In a sense, it’s a crossover – not that you’d know from its authentic bomber outline. We didn’t want technical innovation to detract from the esthetics: front-zipped and armpit ventilation outlets, SEESMART CE-rated armor at the shoulders and elbows, and an insert for a SEESOFT Type RV back protector take nothing away from this jacket’s iconic styling. Fashion that functions Remixing a classic began by creating a head-turning design that guarantees you look the part – whether you’re out riding or just out and about. But it’s on a ride where you’ll fully get to appreciate just how well it performs: the single-layer stretch lining moves with you, tabs at the collar and waist personalize the fit, plus, the jacket attaches easily to your pants via a double jeans loop.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

Ventilated leather gloves for tactile summer touring

The Offtrack 2 gloves live for the summer and love the breeze as the season varies. Primed for hot, humid weather, these gloves offer extreme levels of ventilation with a lightweight feel. Engineered for versatility, even the knuckle protectors are dual purpose: to defend, and guide air into the body of the glove – everything you need to get into your flow. Strength through stretch In the summer, it’s your gloves that take the heat, so a mix of tactile materials ensure a ventilated construction that’s strong and snug in fit without being stifling thanks to PWR|Shell – a 500-denier polyester stretch renowned for its flexible, durable properties – around each finger, and TPU jacquard knit at the knuckles and cuffs – a knit that naturally breathes when you flex your fingers. Make some memories When adventure takes you off the beaten track, you know you’re in for a ride you won’t forget. The Offtrack 2 are with you all the way – plush, impact-absorbing memory foam is stitched into fingers, thumbs, and palms, it’s even under the polyurethane-injected knuckle protectors. Plus, when your hands are still buzzing near the end of a gnarly trail, a pull tab at the cuffs will let the air out as you finish your ride.