NEW FROM REV'IT!

REV'IT! MORGAN JACKET - BLACK

$ 9,561.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Ventilated, high-collar, Heritage-inspired leather jacket

A classic silhouette with an underlying twist. That’s the Morgan jacket. The first of its kind in our Heritage collection. Where Adventure and Heritage meet Combining features we use in one segment into another is not unknown at REV’IT!. So when we took the idea of an inner lining ventilation panel that can be opened and closed – currently used in our Offtrack (Adventure) jacket - and put it into the Morgan, it made total sense. The inside of the jacket is lined with a windstopper material, but open the custom made, lasered ventilation panels, and air can freely flow to the body. That’s also thanks to the perforated full-grain cowhide panels at the front. Keeping it classy With a high collar, a wider-in-the-shoulders and tapered-toward-the-waist fit, and seamlessly integrated slit pockets at the sides, the Morgan jacket ticks all the boxes when it comes to being classy without shouting too loudly. Furthermore, its CE AA classification, included SEESMART elbow and shoulder protection, and safety seams help to keep you looking good and staying protected on the road.

COMFORT FEATURES

Adjustability:
Adjustment strap at waist
Pockets:
Inner pocket

Slit pocket at waist
Lining:
3D mesh

Mesh

Polyester ripstop
Features:
Cuff zipper

Jeans loop

Short connection zipper

Wind collar tab

CLIMATE FEATURES

Insulation:
Detachable thermal body warmer

Internal windblocking window

Wind catcher behind cuff zipper

Wind catcher behind front zipper
Ventilation:
Ventilation panel on center front

PROTECTION FEATURES

Protection:
Prepared for SEESOFT CE-level 2 Insert Back Protector

Safety seams

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
full grain soft cowhide
Visibility:
Reflective label at back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

REV'IT! HUXLEY JACKET - BLACK

$ 9,816.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Classic D-pocket buffalo leather jacket for Heritage-inspired riders.

Drawing inspiration from the past and making it future friendly is what the Heritage collection is all about. In that collection you’ll find the Huxley jacket. An homage to the past with modern-day materials and safety. Focused on the detail Upon first glance, the Huxley jacket is “simple” in terms of looks. We’ve done that for a reason. By keeping the design clean, the focal point can be on the iconic D-pocket positioned at chest. That said, supporting the Huxley in its modern-day appeal is the inclusion of a ventilation panel behind front zipper and behind the action pleat at the back panel, along with a CE AAA classification. Fit to ride Wider in the shoulders and more tapered towards the tummy, the Huxley jacket has a more classic masculine cut to it. And the inclusion of the integrated elastic band at the waist offers a more comfortable fit. Speaking of comfort, the backer against the buffalo leather exterior was added to make sure that even if you’re riding with just a t-shirt underneath, it remains soft against the skin. Furthermore, cooler days are made more bearable thanks to the detachable thermal liner.

COMFORT FEATURES

Adjustability:
Adjustment tab at collar

Adjustment tab at waist
Pockets:
Chest pocket

Inner pocket

Two slit pockets at waist
Features:
Cuff zipper

Expansion pleats at back armhole

Jeans loop

Short connection zipper

Wind collar tab

CLIMATE FEATURES

Insulation:
Detachable thermal liner

Wind catcher behind cuff zipper
Ventilation:
Ventilation panel behind center front zipper

PROTECTION FEATURES

Protection:
Prepared for SEESOFT CE-level 2 Insert Back Protector

Safety seams

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
buffalo leather
Visibility:
Reflective label at back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AAA rating.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

REV'IT! PARALLAX JACKET - BLACK OLIVE

$ 8,923.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Vintage-inspired, full-leather urban sport jacket.

The best way to describe the Parallax is a sportive, vintage, hybrid-style jacket. Taking a retro-inspired leather and making sure you can ride into the future with it. Complete with a CE AA classification. Visual performance Much of what drives the Parallax jacket is how it looks. It’s about visual performance. We use a highly abrasion-resistant cow leather – along with artificial nubuk - for its outer shell construction; giving it that distressed look from the get-go. Yet, over time, will become more worn-in and mold to the contours of your body. Street performance A good-looking jacket would be nothing in our lineup without the street cred to back it up. Included is interior armor at the shoulders and elbows, along with TPU external hard parts at the shoulders. Making the Parallax jacket more than just a one-season use jacket is the inclusion of the detachable body warmer and the wind catcher behind the front zipper.

COMFORT FEATURES

Adjustability:
Adjustment strap at waist
Pockets:
Inner napoleon pocket

Slit pocket at waist

Three inner pockets
Lining:
Mesh
Features:
Comfort cuffs

Cuff zipper

Jeans loop

Long connection zipper

Short connection zipper

Soft edge at collar

Stretchable cuff

Stretch at armholes

Stretch at inside arms

Stretch at shoulders

Stretch at waist

CLIMATE FEATURES

Insulation:
Detachable thermal body warmer

Wind catcher behind cuff zipper

Wind catcher behind front zipper
Ventilation:
Perforation on upper front

PROTECTION FEATURES

Protection:
Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector

Prepared for SEESOFT CE-level 2 Insert Back Protector

Safety seams

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors

TPU protection at shoulder
Outer shell material:
Artificial nubuck

cowhide

Polyester stretch
Visibility:
Laminated reflection on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

REV'IT! PARALLAX JACKET - BROWN

$ 8,923.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Vintage-inspired, full-leather urban sport jacket.

The best way to describe the Parallax is a sportive, vintage, hybrid-style jacket. Taking a retro-inspired leather and making sure you can ride into the future with it. Complete with a CE AA classification. Visual performance Much of what drives the Parallax jacket is how it looks. It’s about visual performance. We use a highly abrasion-resistant cow leather – along with artificial nubuk - for its outer shell construction; giving it that distressed look from the get-go. Yet, over time, will become more worn-in and mold to the contours of your body. Street performance A good-looking jacket would be nothing in our lineup without the street cred to back it up. Included is interior armor at the shoulders and elbows, along with TPU external hard parts at the shoulders. Making the Parallax jacket more than just a one-season use jacket is the inclusion of the detachable body warmer and the wind catcher behind the front zipper.

COMFORT FEATURES

Adjustability:
Adjustment strap at waist
Pockets:
Inner napoleon pocket

Slit pocket at waist

Three inner pockets
Lining:
Mesh
Features:
Comfort cuffs

Cuff zipper

Jeans loop

Long connection zipper

Short connection zipper

Soft edge at collar

Stretchable cuff

Stretch at armholes

Stretch at inside arms

Stretch at shoulders

Stretch at waist

CLIMATE FEATURES

Insulation:
Detachable thermal body warmer

Wind catcher behind cuff zipper

Wind catcher behind front zipper
Ventilation:
Perforation on upper front

PROTECTION FEATURES

Protection:
Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector

Prepared for SEESOFT CE-level 2 Insert Back Protector

Safety seams

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors

TPU protection at shoulder
Outer shell material:
Artificial nubuck

cowhide

Polyester stretch
Visibility:
Laminated reflection on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

MOTONE VINTAGE HOT FORGED BRASS CHAIN ADJUSTER

$ 1,211.00

To make these adjuster blocks we decided to return to the manufacturing process of a bygone era to produce the kit, namely Hot Forged Brass.

To produce a truly individual product the chain adjusters are hand-polished to reveal the facets of the forging process.

A thick Grade 304 Stainless Boss also included

Suitable for use on all the liquid cooled Twins including:

Street Twin (Speed Twin 900)
Street Scrambler (Scrambler 900)
Street Cup
Bobber
T100
T120
Thruxton 1200/R/RS
Scrambler 1200
Speedmaster
Speed Twin 1200

MC PART ID: MMU066

MOTONE VINTAGE HOT FORGED BRASS CHAIN ADJUSTER

MOTONE "THE BOSS" - TOP YOKE/STEERING STEM NUT FOR LC TRIUMPHS - BRASS

$ 956.00

Machined out of CZ121 Brass Billet - Yoke Nut is suitable for use on all the 2016 and Up Triumph Twin Motorcycles

Also known as Triple Tree Nut / Steering Stem Nut and Top Yoke Nut

Fits the following Liquid Cooled (LC) Triumph Bikes:

Street Twin (Speed Twin 900)
Speed Twin
Street Scrambler (Scrambler 900)
Street Cup
Bobber
Speedmaster
Thruxton
Scrambler 1200
T100
T120

Please note if you have a 2001-2015 Bonnie check out MMU069 instead

MC PART ID: MMU068

MOTONE "THE BOSS" - TOP YOKE/STEERING STEM NUT FOR LC TRIUMPHS - BRASS

MOTONE "THE GUVNORS" - FORK TOP CAPS FOR BOBBER/SPEEDMASTER W/ 47MM FORK - BRASS

$ 2,167.00

Hot Forged out of Solid Brass Billets, machined and then Polished these fork top caps are easy enough to swap out and add some brass to your bike - they are also designed to fit well with The Boss our brass Yoke Nut

This particular listing is for the 47mm Fork Bobber Black, which is also the fork used on the Speedmaster from 2021 On

For Speedmasters from 2002-2016 you need part MMU512 , for the 41mm Liquid Cooled Speedmasters 2018-2020 You need part MMU514

MC PART ID: MMU516

MOTONE "THE GUVNORS" - FORK TOP CAPS FOR BOBBER/SPEEDMASTER W/ 47MM FORK - BRASS

REV'IT! NUCLEUS PROTECTOR JACKET

$ 4,589.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight, CE Certified protector jacket to be worn stand-alone or under a jacket.

CE AA rated jacket
Strong and abrasion resistant mesh
SEEFLEX CE-level 2 on shoulders and elbows

This is not your average protector jacket; this is the Nucleus. Made to protect with high levels of CE certified protection, made to look understated and smart, the Nucleus protector jacket can be worn as a stand-alone jacket or serve as a tactical, protective base to wear under any jacket, jersey, hoody, or sweatshirt. Constructed from abrasion-resistant and comfortable 3D air mesh and polyester stretch fabric, the slim-fitting Nucleus takes protective motorcycle gear back to its core. Those core characteristics involve CE-level 2 protectors for the shoulders, elbows, and back with CE-level 1 SEESOFT providing split, chest protector duty. The low-cut collar and the single chest pocket underline the intent to wear the Nucleus as a base, covering things up with a garment of choice. Whether that’s a DIRT Series off-road jacket or your favorite casual jacket or even a sweater, the Proteus will have you covered, looking your best and most comfortable.

COMFORT FEATURES

Pockets: Slit pocket at chest
Features:

External hang loop
Short connection zipper
Stretchable cuff

CLIMATE FEATURES

Ventilation: Fully ventilated mesh

PROTECTION FEATURES

Protection:

SEEFLEX CE-level 2 Elbow Protectors
SEEFLEX CE-level 2 Shoulder Protectors
SEESOFT AIR CE Level 2 on back
SEESOFT at ribcage
SEESOFT CE-level 1 Divided Chest Protectors
Thumb loops

Outer shell material:

3D air mesh
Polyester stretch

Visibility:

Laminated reflective logo on back
Laminated reflective logo on chest

CERTIFICATION
This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

GOLDTOP T-SHIRT NO. 6 - BLACK - SIZE M, XL

$ 765.00

Goldtop T-Shirt No. 6

Goldtop's No. 6 tee features the classic Goldtop spinning top logo, a motorcycle wheel highlighting their connection to everyone's favourite pastime, crossed checker-union jack flags proudly highlighting their British heritage, and the year in which Goldtop was established, i.e., 1951. Sure to be a staple item in your casual moto gear wardrobe, you just can't go wrong with this classic black tee. Comfortable wearing, it is made of 100% combed cotton with the Goldtop logo embroidered on the left sleeve. Sweet as!

100% Combed cotton (responsibly manufactured)
Screen printed for bold clear colours
Goldtop logo embroidered onto left sleeve

GOLDTOP T-SHIRT SIZE GUIDE

All measurements are of the garment when laid flat.

GOLDTOP T-SHIRT NO. 6 - BLACK - SIZE M, XL

GOLDTOP HEAVYWEIGHT SWEATSHIRT - BLACK

$ 1,530.00

Goldtop Heavyweight Sweatshirt

Just like the name says, this sweatshirt is a heavyweight contender and sure to be a staple item in your casual moto gear wardrobe. Comfortable wearing, it features ribbed elasticated sides for a great fit and features Goldtop's simple, yet elegant classic logo with the year they were established embroidered on the left chest & Goldtop motif embroidered on the left cuff. Dig it!

80% Cotton, 20% Polyester
400GSM Heavy-weight brushed back fabric, spun especially for us, to their own exact specification & requirements
Sweatshirt is black in colour with tone-on-tone embroidered chest logo & Goldtop motif embroidered on left cuff
Ribbed for your pleasure ;) with elasticated sides providing for a comfortable stylish fit

To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear something underneath, we would always recommend upsizing. Below is a rough guide to sweater sizing for each size, which are all based on the same general fit. All sizes below are in inches.

KNOX MICROLOCK COMPACT BACK ARMOUR FOR GOLDTOP JACKETS - MENS

$ 956.00

*NEW* KNOX MICROLOCK COMPACT BACK PROTECTOR

NEW Micro-Lock Compact is the thinnest and lightest advanced protection from Knox. The new range of Micro-Lock Compact replacement armour has sizes to cover shoulder, elbow, hips, knees and back as well as Level 1 and 2 performance options.

KEY FEATURES

THINNER – Up to 60% thinner, low profile and more streamlined than before.
LIGHTER – On performance levels 1 and 2.
STRONG – A tough, durable Honeycomb structure, inspired by nature.
AIR FLOW – Radically improved ventilation and breathability.
SMART – Micro-Lock smart technology, soft to touch but locks when impacted, reducing energy transmission.
SOFT – Supple and tactile with excellent form recovery for all day comfort.
UNBROKEN PERFORMANCE – Patented “Flex and Adapt” side closure system that is ergonomically designed to ensure uninterrupted impact performance in use.
ERGONOMIC DESIGN – “Flex and Adapt” system ensures perfect integration in a garment with no unattractive bunching or folding
SECURE – 3d shape fits securely. Engineered for unrestricted ease of movement with the body and to form a 3D shape with excellent form recovery.
STABLE DEPENDABLE PERFORMANCE – Consistent performance across the entire surface area.
SMOOTH – Aesthetically smooth chamfered edges on every protector.
CONFIDENCE INSPRING- The result of 40 years of specialist garment and protector engineering from Knox.
CHOICE – A comprehensive collection of 11 shapes to cover limbs and 2 sizes of back protector. Includes new shapes for the coccyx and thigh.
Part No. 501

KNOX MICROLOCK COMPACT BACK ARMOUR FOR GOLDTOP JACKETS - MENS

REV'IT! FINISH TUBE - BLACK-BLUE

$ 421.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Premium, insulated, full-length tube

Definitely not your average tube, the Finish is made to protect one of the most exposed parts of your body with very stretchy fabric and an elongated design to assure ideal coverage and comfort. The invitingly soft fleece lining prevents heat dissipation while the durable outer fabric blocks the wind from penetrating. The cold of Fall and Winter might be on its way, but with the Finish tube there’s no reason you shouldn’t be on your way either.

REV'IT! FINISH TUBE - BLACK-GREY

$ 421.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Premium, insulated, full-length tube

Definitely not your average tube, the Finish is made to protect one of the most exposed parts of your body with very stretchy fabric and an elongated design to assure ideal coverage and comfort. The invitingly soft fleece lining prevents heat dissipation while the durable outer fabric blocks the wind from penetrating. The cold of Fall and Winter might be on its way, but with the Finish tube there’s no reason you shouldn’t be on your way either.

REV'IT! THERMIC LL WINTER PANTS

$ 1,530.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Insulated, long-leg base layer
Breathable
Insulating / Keeps you warm
Direct-to-skin

The laws of thermodynamics dictate that heat will always move to colder areas. Well, not anymore, because with the Thermic LL base layer, we’re fighting physics with physics. Engineered with hypoallergenic Dryarn® fabric in very specific, strategically placed knitting patterns, our R&D managed to create base layer pants that actively insulate body heat. Meanwhile, perspiration is wicked away, absorbed by the fabric, and allowed to evaporate away from the skin, preventing the moisture from conducting between the cold outside and the heat inside. Even the elasticated waistband and bottom hems are designed so the base layer comfortably wraps around the waist and ankles, preventing heat from escaping. Much more than just underwear By effectively trapping body heat, your body is less strained to keep your body temperature up by burning calories and consuming energy. The energy you could be putting to good use in staying sharp and staying focused, proving the Thermic LL base layer pants are much more than just simple underwear.

REV'IT! THERMIC LS WINTER SHIRT

$ 2,422.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Insulated, long sleeve base layer
Breathable

Insulating / Keeps you warm

Direct-to-skin
The laws of thermodynamics dictate that heat will always move to colder areas. Well, not anymore. With the Thermic LS long sleeve base layer, we’re fighting physics with physics. Engineered with hypoallergenic Dryarn® fabric in very specific, strategically placed knitting patterns, our R&D managed to create a long sleeve base layer shirt that actively insulates body heat. Meanwhile perspiration is wicked away, absorbed by the fabric, and allowed to evaporate away from the skin, preventing the moisture from conducting between the cold outside and the heat inside. Even the raised elasticated collar is designed so the base layer comfortably wraps around the neck, preventing rising heat from leaving your core. Much more than just underwear By effectively trapping body heat, your body is less strained to keep your body temperature up by burning calories and consuming energy. Energy you could be putting to good use to stay sharp and focused, proving the Thermic LS base layer shirt is much more than just simple underwear.

REV'IT! AIRBORNE 2 LL SUMMER PANTS

$ 1,148.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Moisture-wicking and heat-regulating, long leg base layer

Moisture-managing
Breathable
Direct-to-skin

Whatever you do, don’t call it underwear. Our Airborne LS 2 base layer pants are so much more than just that. Made with incredibly stretchy, hypoallergenic Dryarn®, soft-to-the-touch fabric and constructed using 3D round knitting for comfort-assuring, minimal seaming, the Airborne LS 2 puts base back into base layer. These form-fitted, long leg pants are truly the foundation of any road-ready outfit. Keep you feeling cool and fresh By engineering specific fabric structures into the Airborne LS 2’s design, perspiration is wicked away and allowed to evaporate effectively and quickly, to keep you feeling cool and fresh however demanding conditions might get. On top of its heat-regulating properties, the Airborne LS 2 base layer also prevents your top layer pants from sticking to your skin. That makes taking your gear off after a long day’s riding in high temperatures much easier. Throwing your base layer in the washing machine is also a great deal simpler than washing your motorcycle pants. So, your favorite riding pants keep feeling fresh for longer.

REV'IT! AIRBORNE 2 LS SUMMER SHIRT

$ 1,912.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Moisture-wicking and heat-regulating, long sleeve base layer

Moisture-managing
Breathable
Direct-to-skin

Whatever you do, don’t call it underwear. Our Airborne LS 2 long sleeve base layer shirt is so much more than just that. Made with incredibly stretchy, hypoallergenic Dryarn®, soft-to-the-touch fabric and constructed using 3D round knitting for comfort-assuring, minimal seaming, the Airborne LS 2 puts base back into base layer. The form-fitted, long sleeve shirt truly is the foundation of any road-ready outfit. Keep you feeling cool and fresh By engineering specific fabric structures into the Airborne LS 2’s design, perspiration is wicked away and allowed to evaporate effectively and quickly, to keep you feeling cool and fresh however demanding conditions might get. On top of its heat-regulating properties, the Airborne LS 2 base layer also prevents your top layer jacket from sticking to your skin. That makes taking your gear off after a long day’s riding in high temperatures much easier. Throwing your base layer in the washing machine is also a great deal simpler than washing your jacket. So, your favorite riding jacket keeps feeling fresh for longer.

STRATH MOTO FLYING WHEEL TEE - FOREST GREEN

$ 638.00

BRAND NEW FOR 2023/204 - FLYING WHEEL TEE

We teamed up with Flannel Foxes to create our new "Flying Wheel" Hoody made right here in Canada! The wings featured on the flying wheel are a nod to a classic wing logo and the tee features the address of our shop established in our hometown of Edmonton in May 2019. Put it on, hop on your bike, and fly down the road!

Details:

Unisex (Women may want to size down)
Machine Washable
50/50 Ring Spun Poly/Cotton
Knit, dyed, cut, sewed and printed in Canada.
Canadian 9oz/USA 6 oz

All measurements below are taken in inches with the shirt laid flat.

	S	M	L	XL	XXL
Chest (A)	18	20	22	24	26
Body Length (B)	28	29	30	31	32
Sleeve Length (C)	7.5	8	8.5	9	9.5

STRATH MOTO FLYING WHEEL TEE - FOREST GREEN

STRATH MOTO DUNES LONG SLEEVE TEE - WHITE

$ 829.00

We teamed up with Flannel Foxes on our new "Dunes" longsleeve tee to bring out some '90s Dakar Vibes! These are proudly made right here in Canada. Get inspired to ride!

Details:

Unisex (Women may want to size down)
Machine Washable
50/50 Ring Spun Poly/Cotton
Knit, dyed, cut, sewed and printed in Canada.
Canadian 9oz/USA 6 oz

All measurements below are taken in inches with the shirt laid flat.

	S	M	L	XL	XXL
Chest (A)	18	20	22	24	26
Body Length (B)	28	29	30	31	32
Sleeve Length (C)	7.5	8	8.5	9	9.5

STRATH MOTO DUNES LONG SLEEVE TEE - WHITE

STRATH MOTO RACING TEAM TEE - BLACK

$ 638.00

We teamed up with Flannel Foxes to create our new "Racing Team" tee proudly made right here in Canada! The wing featured on the front is a nod to a classic wing logo and the back features the address of our shop established in our hometown of Edmonton in May 2019. Put it on, hop on your bike, and chase down that checkered flag!

Details:

Unisex (Women may want to size down)
Machine Washable
50/50 Ring Spun Poly/Cotton
Knit, dyed, cut, sewed and printed in Canada.
Canadian 9oz/USA 6 oz

All measurements below are taken in inches with the shirt laid flat.

	S	M	L	XL	XXL
Chest (A)	18	20	22	24	26
Body Length (B)	28	29	30	31	32
Sleeve Length (C)	7.5	8	8.5	9	9.5

STRATH MOTO RACING TEAM TEE - MUSTARD

$ 638.00

We teamed up with Flannel Foxes to create our new "Racing Team" tee proudly made right here in Canada! The wing featured on the front is a nod to a classic wing logo and the back features the address of our shop established in our hometown of Edmonton in May 2019. Put it on, hop on your bike, and chase down that checkered flag!

Details:

Unisex (Women may want to size down)
Machine Washable
50/50 Ring Spun Poly/Cotton
Knit, dyed, cut, sewed and printed in Canada.
Canadian 9oz/USA 6 oz

All measurements below are taken in inches with the shirt laid flat.

	S	M	L	XL	XXL
Chest (A)	18	20	22	24	26
Body Length (B)	28	29	30	31	32
Sleeve Length (C)	7.5	8	8.5	9	9.5

STRATH MOTO FLYING WHEEL HOODY - BLACK

$ 1,211.00

BRAND NEW FOR FALL/WINTER 23/24 - FLYING WHEEL HOODY

We teamed up with Flannel Foxes to create our new "Flying Wheel" Hoody made right here in Canada! The wings featured on the flying wheel are a nod to a classic wing logo and the hoody features the address of our shop established in our hometown of Edmonton in May 2019. Put it on, hop on your bike, and fly down the road!

FEATURES

Unisex - ladies may want to size down.

Our Strath Moto fleece Hoody is made from a poly cotton blend, medium-weight, flexible and cozy with a soft touch feel.

Composition

50% Polyester / 50% Cotton Fleece

Care Instruction

Machine wash cold. Use only non-chlorine bleach when needed. Tumble dry low. Do not iron. Do not dry clean.

MADE IN CANADA!

STRATH MOTO FLYING WHEEL SWEATSHIRT - NAVY

$ 1,148.00

BRAND NEW FOR FALL/WINTER 23/24 - FLYING WHEEL SWEATSHIRT

We teamed up with Flannel Foxes to create our new "Flying Wheel" sweatshirt made right here in Canada! The wings featured on the flying wheel are a nod to a classic wing logo and the sweater features the address of our shop established in our hometown of Edmonton in May 2019. Put it on, hop on your bike, and fly down the road!

FEATURES

Unisex - ladies may want to size down.

Our Strath Moto fleece crewneck sweatshirt is made from a poly cotton blend, medium-weight, flexible and cozy with a soft touch feel.

Composition

50% Polyester / 50% Cotton Fleece

Care Instruction

Machine wash cold. Use only non-chlorine bleach when needed. Tumble dry low. Do not iron. Do not dry clean.

MADE IN CANADA!

STRATH MOTO FLYING WHEEL SWEATSHIRT - NAVY

ETHEN SCRAMBLER/CAFE GOGGLE STRAP - RED/ORANGE/YELLOW

$ 574.00

Replacement elastic strap for the Ethen Scrambler or Cafe Racer goggles.

ETHEN SCRAMBLER/CAFE GOGGLE STRAP - RED/ORANGE/YELLOW

SENA 5R LITE BLUETOOTH COMMUNICATOR - SINGLE

$ 1,708.00

Effortless Bluetooth Communication:

Simplify motorcycle Bluetooth communication with the Sena 5R LITE. The 5R LITE features 2-Way HD intercom and smartphone connectivity for music, GPS, taking phone calls, and more. The device features an LCD screen for visual confirmation of the device's settings before your ride.

Rider to Rider Intercom:

The compact 5R LITE allows for connection with one other rider via Bluetooth intercom. The 5R LITE is compatible with all Bluetooth Intercom equipped Sena and Sena-powered devices. Pair the 5R to another device, and enjoy an open line of hands-free communication with a working distance of up to 700 m (0.4 mi).

Smartphone Connectivity:

The Sena 5R LITE motorcycle communication system also allows users to conveniently connect their smartphone to stream music or podcasts, power on turn-by-turn GPS navigation, and even take a phone call if need be.

Access to the Sena Motorcycles App:

Link the 5R LITE with the Sena Motorcycles app to customize a variety of device settings and functions from your fingertips. Riders can configure settings and even access the 5R's quick start guide from the convenience of their smartphone. Head to the App Store or Google Play store to download the Sena Motorcycles App.

Bluetooth:

Bluetooth 5.1
Headset Profile (HSP)
Hands-Free Profile (HFP)
Advanced Audio Distribution Profile (A2DP)
Audio Video Remote Control Profile (AVRCP)

Intercom:

Working Distance: Up to 700 m (760 yards) in open terrain
Supports up to 2 riders

Audio:

Noise Cancellation: Advanced Noise Control™
Codec: Built-in SBC Codec

Battery:

Talk time: up to 8 hours
Charging time: 2.5 hours
Type: Lithium Polymer Battery

What's Included:

5R Bluetooth Communication System
Boom Microphone Holder
Speaker Pads (Thick)
Hook and Loop Fastener for Wired Boom Microphone
Hook and Loop Fasteners for Speakers
Hook and Loop Fasteners for Wired Microphone
Glued Surface Mounting Plate
Simple Quick Start Guide
Wired Boom Microphone
HD Speakers
Microphone Sponges
Hook and Loop Fastener Holder
Wired Microphone
Clamp Unit
USB Power & Data Cable (USB Type-C)

SENA 5R LITE BLUETOOTH COMMUNICATOR - SINGLE

FUEL SAFARI JACKET - BLACK - SIZE L

$ 10,198.00

The Safari Jacket is inspired by the jackets of the first explorers to reach the unknown continents. It is the perfect companion for all your adventures in the wildest places of the world.

A 3/4 jacket made with Fuel 3CORE: a fabric with a high abrasion resistance that, together with its protection in the back, shoulders, and elbows, has obtained the European Class AAA and the UKCA certificates. Ripstop fabric 100% Nylon with PU coating that makes it water-repellent, cold resistant and wear resistant to damage from normal usage.

Single layer 3/4 jacket

A 3/4 jacket made with Fuel 3CORE: a fabric with a high abrasion resistance that, together with its protection in the back, shoulders, and elbows, has obtained the Class AAA CE Certified and the UKCA certificates.

It's all in the details

A small pin on the lapel, a piece of fabric to better close the collar and keep the air out, leather reinforcements at strategic points and a uniquely designed buckle.

Folded rain jacket

4 pockets in the front (two of them large in size) and two in the back, where in one of them you can find a water-resistant jacket folded into a bag in case of rain to wear over the jacket and be protected from water.

PROTECTION TECHNICAL SPECIFICATIONS

▪ Fuel 3CORE single layer fabric
▪ Removable Smoothways CE level 2 protectors on the back, elbows, and shoulders
▪ Packable rain jacket
▪ YKK double rack zipper
▪ CE EN17092-3:2020 Class AAA certified
▪ UKCA certified

What is Fuel 3CORE Fabric?

Technology is changing and growing fast. This is why after two years of development, we developed the FUEL 3CORE fabric, to guarantee customer satisfaction and improve our products.

Fuel 3CORE fabric is produced with leading-edge tri-core technology: a new revolutionary technology resulting in a lighter fabric with significantly improved performance in both strength and comfort. The Fuel 3CORE single layer is an abrasion-resistant fabric with bi-stretch exclusively developed for our products, so you can leave the main road safer, lighter, and even more comfortable.

All measurements are in centimeters (cm) with the garment laid flat. We suggest you compare the measurements below with a jacket you already own to help narrow down your size.

FUEL SAFARI JACKET SIZE CHART

SENA 3S PLUS UNIVERSAL MICROPHONE KIT

$ 1,708.00

MAXIMUM AUDIO EXPERIENCE WITH A MINIMALIST DESIGN

Unassuming, yet proven sound. The 3S Plus Universal headset utilizes Bluetooth® 4.1 to deliver incoming and outgoing audio for music, phone calls, GPS directions, and intercom conversations with a passenger or a riding companion up to 400 meters (0.25 miles) away. Voice prompts available in 11 languages keep you apprised of the headset’s functions. Simple, elegant, and powerful with everything you need… and nothing you don’t.

A SLEEK INTERCOM WITH EXTERNAL 2-BUTTON CONTROLS

The unified speaker construction of the 3S Plus Universal lends itself to simplicity and efficiency, and is able to be applied to a wide variety of helmets. With the sleekest external controls available for full or open-face helmets, the two-button control module attaches to the helmet’s shell for easy control access and a minimalist look. Included with the 3S Plus Universal are two wired microphone extensions. Select between standard and boom microphone for your best fit.

BE HEARD, NO MATTER WHERE YOU ARE

The 3S Plus Universal boasts HD Intercom, providing superior audio clarity over the 2-way intercom on the road. Advanced Noise Control also helps filter out the busy sounds of the highway so your voice remains crystal-clear over the intercom. This Bluetooth headset allows up to eight hours of talk time on a single charge and seven days of standby time. Charging the headset is easy thanks to the new USB-C connection.

THE SENA UTILITY APP KEEPS YOU CONNECTED

The Sena Utility App makes configuring your 3S Plus Universal a breeze. Change feature settings, access the product’s digital Quick Start Guide on your phone, and more. And with Smart Intercom Pairing, connecting to a friend is as easy as scanning a QR code on your phone.

GENERAL

Dimensions:
- Speaker drive unit: 23 mm - thickness 4.3 mm
- Boom Microphone: length 120 mm
- Wired Microphone: length 180 mm
Weight: 48 g (1.69 oz)
Operating temperature: -10˚C – 55˚C (14°F – 131°F)
Charging temperature: 0˚C – 45˚C (32°F – 113°F)

AUDIO

Noise Cancellation: Advanced Noise Control™
Codec: Built-in SBC Codec

BLUETOOTH

Bluetooth^® 4.1
Headset Profile (HSP)
Hands-Free Profile (HFP)
Advanced Audio Distribution Profile (A2DP)
Audio Video Remote Control Profile (AVRCP)

INTERCOM

Working distance: up to 400 meters (0.25 miles) in open terrain
Supports up to 2 riders

BATTERY

Talk time: up to 8 hours
Charging time: 3 hours
Type: Lithium Polymer Battery

AGE OF GLORY EASY RIDER PIN

$ 166.00

Your jacket needs a fresh touch, yeah? Add this pin to your riding vest or jacket and ride easy.

Enamel pins
Embossed 2D metal
“Butterfly” closure

AGE OF GLORY KEEP ROLLIN' PIN

$ 166.00

Your jacket needs a fresh touch, yeah? Add this pin to your riding vest or jacket and keep rollin' mate!

Enamel pins
Embossed 2D metal
“Butterfly” closure

AGE OF GLORY MIGHTY SPARKS PIN

$ 166.00

Your jacket needs a fresh touch, yeah? Then this pin is made for your jacket! Inspired by retro parts ads, it'll add just the right touch to your riding vest or jacket.

Enamel pins
Embossed 2D metal
“Butterfly” closure

AGE OF GLORY FLYING TIGER PIN

$ 166.00

Your jacket needs a fresh touch, yeah? What's better than a flying tiger grabbing life by the handlebars? Pretty much nothing. Get it on your jacket; you'll have a blast!

Enamel pins
Embossed 2D metal
“Butterfly” closure

AGE OF GLORY STRIPES SOCKS - BLACK OFF-WHITE ORANGE

$ 447.00

A vintage look and unparalleled comfort! These socks will be the ultimate accompaniment on your rides.

– 87% Cotton / 10% Polyamid / 3% Elastane
– Cushioned socks
– Antibacterial properties

AGE OF GLORY STRIPES SOCKS - BLACK OFF-WHITE ORANGE

AGE OF GLORY CHECKERS SOCKS - OFF-WHITE BLACK

$ 447.00

Comfortable and with a vintage look, you'll feel like a born leader wearing these sweet new Age of Glory socks! Keep your riding buddies on the right road and enjoy the ride!

– 87% Cotton / 10% Polyamid / 3% Elastane
– Cushioned socks
– Antibacterial properties

AGE OF GLORY CHECKERS SOCKS - OFF-WHITE BLACK

AGE OF GLORY BOLT SOCKS - OFF-WHITE RED BLUE

$ 447.00

Ready to split the road like lightning? These ultra-comfortable Age of Glory socks will get you amped up to ride. Age of Glory's bolt socks are made in a comfortable heavy cushioned cotton with antibacterial properties.

– 87% Cotton / 10% Polyamid / 3% Elastane
– Cushioned socks
– Antibacterial properties

AGE OF GLORY BOLT SOCKS - OFF-WHITE RED BLUE

AGE OF GLORY BOLT SOCKS - BLACK YELLOW OFF-WHITE

$ 447.00

Ready to split the road like lightning? These ultra-comfortable Age of Glory socks will get you amped up to ride. Age of Glory's bolt socks are made in a comfortable heavy cushioned cotton with antibacterial properties.

– 87% Cotton / 10% Polyamid / 3% Elastane
– Cushioned socks
– Antibacterial properties

AGE OF GLORY BOLT SOCKS - BLACK YELLOW OFF-WHITE

STRATH MOTO x FLANNEL FOXES LOOSE KNIT TOQUE/BEANIE - NAVY

$ 510.00

We teamed up with Flannel Foxes to create some Made in Canada toques eh! These beauties are made from a loose-knit acrylic. Sure to be a staple in your beanie diet, these will help you stay in that moto-state-of-mind through the winter months.

STRATH MOTO x FLANNEL FOXES LOOSE KNIT TOQUE/BEANIE - NAVY

STRATH MOTO x FLANNEL FOXES TIGHT-KNIT TOQUE/BEANIE - CHARCOAL GREY

$ 510.00

We teamed up with Flannel Foxes to create some Made in Canada toques eh! These beauties are made from tight-knit acrylic. Sure to be a staple in your beanie diet, these will help you stay in that moto-state-of-mind through the winter months.

STRATH MOTO x FLANNEL FOXES TIGHT-KNIT TOQUE/BEANIE - CHARCOAL GREY

STRATH MOTO x FLANNEL FOXES TIGHT-KNIT TOQUE/BEANIE - RED

$ 510.00

We teamed up with Flannel Foxes to create some Made in Canada toques eh! These beauties are made from tight-knit acrylic. Sure to be a staple in your beanie diet, these will help you stay in that moto-state-of-mind through the winter months.

STRATH MOTO x FLANNEL FOXES TIGHT-KNIT TOQUE/BEANIE - RED

MOTONE CLUTCH (LHS) COVER/BADGE - UNION JACK - 2 TONE BRASS & BLACK

$ 1,466.00

SOLID BRASS ENGINE BADGE - 2Tone Brass & Black Finish : Krackle Black with Polished Brass Top Face

This cover is for the CLUTCH side (the larger round badge on the left hand side of the bike)

Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today

Street Twin
Street Cup
Street Scrambler
Scrambler 1200
Bonneville Bobber
T100
T120
Thruxton
Speedmaster
Speed Twin

MC PART ID: MMU549

MOTONE CLUTCH (LHS) COVER/BADGE - UNION JACK - 2 TONE BRASS & BLACK

MOTONE POINTS ACG COVER/BADGE - UNION JACK - BLACK/BRASS CONTRAST FINISH

$ 1,466.00

SOLID BRASS ENGINE BADGE - 2 Tone - BLACK and BRASS

Krackle Black and Polished Brass

This cover is for the ACG (What was once known as the "Points" Cover on the Vintage Meriden Triumphs) - The smaller of the two round engine covers. Clutch Side Badges/Covers are also available.

Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today

Street Twin
Street Cup
Street Scrambler
Scrambler 1200
Bonneville Bobber
T100
T120
Thruxton
Speedmaster
Speed Twin

MC PART ID: MMU548

MOTONE POINTS ACG COVER/BADGE - UNION JACK - BLACK/BRASS CONTRAST FINISH

MOTONE REAR WIRING LOOM - PLUG AND PLAY - MULTI VERSION - LC TRIUMPHS

$ 638.00

MULTI VERSION for optional use with 3in1 Rear Lights and a Tail Light at the same time (also works with regular tail light as well)

Plug and play wiring loom for all the Liquid Cooled Triumph Twins meaning all the twins 2016 and up

Euro 4 and Euro 5: Street Twin, Street Cup, T100, T120, Thruxton R, Thruxton S, Street Scrambler,

Euro 4 Speed Twin (2019-2020)

***Does not fit Bobber and Speedmaster (See DDM016) and Euro 5 Speed Twin (2022 and on) - (new one for this coming soon)***

Our Adapter comes both colour and letter coded with each function banded together and labeled for easy use.

NOTE: MOTONE LOOM INCLUDES DIODE INLINE TO PREVENT ECU WARNING LIGHT ERROR ON NON-TRIUMPH LIGHTS

It also utilises all 6 of the stock loom plugs giving you an extra live connector to run any auxiliary devices

T: Tail light - (CAN CONNECT TAIL LIGHT and 2 MULTI FUNCTION 3in1s at the same time)

RED - BRAKE Light [TRIPLE SPADE CONNECTORS]

YELLOW - RUNNING Light [TRIPLE SPADE CONNECTORS]

BLACK - Earth [TRIPLE SPADE CONNECTORS]

L: Left Indicator/Turn Signal

BROWN - LHS Signal

BLACK - Earth

R: Right Indicator/Turn Signal

ORANGE - RHS Signal

BLACK - Earth

A: Auxiliary Live

GREEN - AUX

BLACK - Earth

Note: 6-Way loom connector hermetically sealed to prevent water ingress

MC PART ID: DDM021

MOTONE REAR WIRING LOOM - PLUG AND PLAY - MULTI VERSION - LC TRIUMPHS

MOTONE TPS CARB/THROTTLE BODY COVER - PAIR - RIBBED/FINNED - BLACK/CONTRAST POLISH

$ 1,466.00

Sold as a pair. Made using the same technology as the original equipment manufacturing process, high-pressure die cast.

Suitable for any of the 1200 twins.

Fits: T120, Thruxton R, Thruxton S, Bobber, Speedmaster, Scrambler 1200

Sold here in Black finish with Polished Fins!

The covers come with 6 brass bolts similar to those found on the original monobloc Amal carbs, which were of course the inspiration for the look of the throttle body that Triumph has employed on these motors - fitment of the brass bolts is optional - you can also reuse your stock silver bolts.

MC PART ID: MMU016

MOTONE TPS CARB/THROTTLE BODY COVER - PAIR - RIBBED/FINNED - BLACK/CONTRAST POLISH

MOTONE THE BELTANE - BOBBER/SPEEDMASTER BATTERY STRAP - BLACK LEATHER & BRASS

$ 1,211.00

The Beltane Leather Battery Strap in Black Suitable for your LC TRIUMPH BOBBER or SPEEDMASTER Motorcycle

Fits all years LC Triumph BOBBER and SPEEDMASTER 1200

Premium Grade Leather - Stitched Back - Brass fittings and Stainless Clip

These are a bolt-on piece and can be fit at home in minutes

MC PART ID: BBB001

MOTONE THE BELTANE - BOBBER/SPEEDMASTER BATTERY STRAP - BLACK LEATHER & BRASS

MOTONE THE ZEPHYR MK.II - BOBBER/THRUXTON INTAKE COVERS / THROTTLE BODY TRIM - BLACK

$ 1,466.00

The Zephyr - Metal Intake Covers in Black Suitable for your THRUXTON 1200 or TRIUMPH BOBBER Motorcycle

Fits all years Triumph THRUXTON 1200 (S/R/RS) and BOBBER and SPEEDMASTER 1200

Formed out of High-Pressure Die Cast Aluminium

Sold as a Set with both Left and Right pieces included and finished in our signature wrinkle powder Black

These are a bolt-on piece and can be fit at home in minutes

MC PART ID: MMU579

MOTONE THE ZEPHYR MK.II - BOBBER/THRUXTON INTAKE COVERS / THROTTLE BODY TRIM - BLACK

MOTONE TRILINE BILLET BAR END MIRROR TYPE S (80 MM) - PAIR

$ 4,526.00

TRILINE/ TYPE S / PAIR OF BAR END MIRRORS (2 PCS)

Stealth Triline Design
80mm Mirror Head
6061-T6 Billet Aluminium Body
BLACK ANODISED MATTE FINISH
Hard Scratch Resistant Automotive Glass
R1400 Convex Reflective Glass
Billet Adapters for both 22mm (7/8s) and 25.4mm (Inch) Handlebars

Motone Billet Mirrors available either as single mirrors or in pairs in size variants :

Type S (Small 80mm)
Type R (Regular 100mm - Emarked)

***This listing is for the Type S (80 mm size) mirrors and are sold as a pair.***

All Motone Billet Mirrors use real automotive glass components in our mirror products due in part to the scratch resistant nature of the engineered Glass surface - polished aluminium for reflective surface cannot hold up to same level of scratch resistance - and the other key advantage of using engineered glass means we are able to achieve a R1400 lever of reflection (much wider angle than flat aluminium/non automotive glass).

MC PART ID: 2XMRR003

MOTONE TRILINE BILLET BAR END MIRROR TYPE S (80 MM) - PAIR

MOTONE EXACTA MOUNTS BAR END MIRROR ADAPTERS

$ 829.00

These are the Exacta Mounts - designed for the situation where you want to fit a bar end mirror to your handlebar but you have no free space at the end of the bar to clamp the mirror.

SOLD IN PAIRS (2 pcs)

These brackets slide up inside your hollow bar with a design that expands tight when the bolt is screwed down providing a solid Mount for the bar end mirror of your choice (we might have some that can help you there - check out the TRILINE or TURISMO)

For this reason they will work in any handle bar so long as the internal tube is clear. Please make sure this is the case before ordering!

MC PART ID: MRR005

MOTONE EXACTA MOUNTS BAR END MIRROR ADAPTERS

GOLDTOP ENAMEL BADGE PIN - CROSSED FLAGS

$ 166.00

Enamel badges and pins featuring a variety of designs
Each pin is secured by either a safety-pin clasp or a single butterfly clutch clasp

GOLDTOP ENAMEL BADGE PIN - CROSSED FLAGS

GOLDTOP FLAT TRACKER JACKET SUMMER VERSION W/ SEAMLESS FRONT (CE ARMOURED) - BLACK

$ 9,561.00

Goldtop England's Flat Tracker Jacket has us wanting to get sideways! This version of the Flat Tracker gets the Summer treatment, featuring perforated leather along the arms and chest for increased breathability in warm weather, with a seamless transition to non-perforated leather on the torso for a very sleek and dare we say, sexy-looking jacket indeed. It also features a removable inner gilet/vest allowing you to customize your climate control. A jacket for modern-day riders who appreciate a subtle nod to the more traditional designs of the 1960s and 1970s! Beautifully crafted from 1.4mm Aniline Cowhide with diamond double stitching, all hand finished with traditional ball zips, Stainless Steel fastenings, and a light tan suede collar and black suede trim inside the cuffs. This jacket comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for a Knox back protector (optional upgrade).

PRODUCT INFO

1.4mm thickness black aniline cowhide leather with perforated panels for better airflow in warm weather
Trademark Goldtop gold plain lining with a removable quilted gilet
CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
Optional Knox Micro-lock Compact back protector can be purchased here

Double-stitched quilting across the collar and shoulders
Industrial grade hand-polished centre zip with AERO pull
4 Zipped external pockets
2 Interior chest pockets
Adjustable cuffs with ball zips
Stainless Steel adjustable waist buckles and collar snap
Light tan suede leather trim inside collar, black suede leather trim inside cuffs and zip guard
Dropped back

Note: the pictures of the model in the images show the version with the split-seam front. This version is with the seamless front.

To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.

GOLDTOP JACKET SIZE GUIDE

GOLDTOP FLAT TRACKER JACKET SUMMER VERSION W/ SEAMLESS FRONT (CE ARMOURED) - BLACK

HJC V10 HELMET SHIELD (HJ-41)

$ 1,020.00

HJC HJ-41 Visor Fits V10

Replacement HJ-41 visor suitable for V10 helmets.

Key Features

Pinlock® ready HJ-41 visor: provides 99% UV protection, anti-scratch coated. Note: Pinlock ready refers to the shield's ability to accept a Pinlock. Pinlocks are sold separately.
Quick release visor mechanism