NEW ARRIVALS

THE ULTIMATE SPORT TOURING HELMET.

New ventilation system, offers a new three position upper vent for optimal air intake; the dual-side intakes have a new positioning / angle that favors more fresh air and re-designed to allow better handling and grip with winter gloves.

New Chin ventilation intake draws more fresh air into the mouth area.

The EPS liner has been modified, adding more air channels to allow the extra air to pass over the head and out of the helmet.

FEATURES

• Carbon Fiber Shell
  
• 3 Shell Sizes: XXS-S | M-L | XL-XXXL
• PC Lexan shield clear with Anti-Fog position and Super Lock
• X-Lock Quick Release System
• Visor with recessed cavity for Pinlock
• Panoramic Eye Port
• Inner Sunvisor
• Double D-Ring buckle
• Cheek Pads with emergency strap system V2
• Night vision – reflectors
• Special chin shape to reduce breast injury risk from frontal impacts
• X.MART DRY fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin wind stopper
• Aerodynamic shell & rim
• Air Dynamic System - 3 inlet air-vents
• Chin ventilation
• NEXX X.COM Intercom system prepared

SPECIFICATIONS

• Weight: 1350 grs +/- 50 grs
• 3 shell sizes: XXS-S; M-L; XL-XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

OLD SCHOOL RACING. PREMIUM MATERIALS.

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 2 (XS-M | L-XXL)
• PC Lexan flat shield
• Prepared for the use of Raleri Anti-Fog system
• Double-D ring buckle
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin wind stopper
• Chin Ventilation with adjustable position open/close

SPECIFICATIONS

• Weight: 1350grs +/- 50 grs
• Shell Sizes: 2 (XS-M | L-XXL)
• Homologation: ECE/22-05,DOT e NBR-7471:2001

THE ULTIMATE ADVENTURE HELMET. NOW LIGHTER. GO WILD.

Welcome to the new X-PRO CARBON fiber – a new technology that allows an even lighter carbon shell, with only 1450 grams! 

The X.WED2 marries the comfort of a touring helmet with the ventilation of a dirt helmet to bring you the ultimate ADV lid. Big bikes like to go fast but sometimes the terrain requires calculated and strategic low-speed prowess. In these conditions, the X.WED2 truly shines. With double, the air inlet ventilation in comparison to its predecessor, the X.WED2 does everything it can to keep you cool when you need to keep your cool. At highway speeds, head checks are more of a breeze because the peak has been engineered to catch less of the breeze. A drop-down internal sun visor enables a smooth transition from sunny morning jaunts to dimly-lit evening excursions. 

FEATURES

• X-PRO Carbon Shell
• Shell Sizes: 3 (XXS-S | M-L | XL-XXXL)
• PC Lexan shield clear with Anti-Fog position and Super Lock
• X-Lock Quick Release System
• Visor with a recessed cavity for Pinlock
• Panoramic Eye Port; - Inner Sun visor
• SV Dust Guard – for protection for the sun visor - Double D-Ring buckle
• Removable Chinstrap covers - Cheek Pads with emergency strap system V2
• Cheek Pads also include straps of the new X-HIDRO system - Night vision – reflectors
• Special chin shape to reduce breast injury risk from frontal impacts
• X.MART DRY fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin wind stopper
• Aerodynamic shell & rim
• Air Dynamic System - 3 inlets and 2 outlets air-vents
• Chin ventilation
• NEXX X.COM Intercom system prepared
• Aerodynamic Peak, with adjustable multi-position system
• Peak extensor
• Top Action camera support

SPECIFICATIONS

• Weight: 1450 g +/- 50 g
• 3 shell sizes: XXS-S; M-L; XL-XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

OLD SCHOOL RACING. PREMIUM MATERIALS.

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 2 (XS-M | L-XXL)
• PC Lexan flat shield
• Prepared for the use of Raleri Anti-Fog system
• Double-D ring buckle
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin wind stopper
• Chin Ventilation with adjustable position open/close

SPECIFICATIONS

• Weight: 1350grs +/- 50 grs
• Shell Sizes: 2 (XS-M | L-XXL)
• Homologation: ECE/22-05,DOT e NBR-7471:2001

X.WRL: THE NEW ADV-INSPIRED RALLY HELMET DESIGNED FOR LIMITLESS ADVENTURE

Extremely light, comfortable and with impressive ventilation the new X.WRL (Wild Rally) is the ideal choice for those looking for a helmet for more technical and difficult terrain incursions and that can easily accommodate off-road goggles.

FEATURES

• Lighter than ever with the X-PRO Carbon Shell:  All X.WRL models are molded with the brand new X-PRO CARBON technology, which provides an incredible weight of just 1250 grams. Engineered for elite motorcyclists who demand a light-weight helmet, the new X-PRO carbon with 3K carbon fabrics is 10% lighter than other carbon shells and offers higher stiffness and ultimate strength. Everything you’d expect from one of the most advanced carbon fiber helmet technologies ever.
• Comfort comes first: the New X.WRL comes in 3 aerodynamic shell sizes (XXS-S | M-L | XL-XXXL) and 4 EPS liner size fit options to combine more compact dimensions with outstanding fit and comfort. With high-performance fabrics, refined materials and thoughtful details that will surprise you, the X.WRL interior is designed for total comfort and convenience. All liner parts, including the neck roll are removable and washable to make post-adventure cleanups simple, fast and painless. Plus, soft-touch X-Mart Dry fabrics help you to stay cool – featuring a drying rate twice as fast as normal cotton. Plus, the inner lining is made of soft anti-sweat and anti-allergic fabric.
• Neck Brace fit:  The new shell design helps to reduce weight and makes the fit compatible with the use of a neck brace.
• Two visors included and option to purchase a Transitions smart light visor: a clear visor and an Iridium Red visor for road use are both included in the box and prepared for Pinlock use. The panoramic eye port allows for an excellent field of view. Available as an optional accessory to be purchased separately, Transitions® smart light visors automatically adapt to the ideal hue in any light condition, staying clear at night and smoky when exposed to strong light, providing a safe and comfortable ride, at night or any time of day.
• Integrated Goggle Strap Holder:  One of the unique features of the X.WRL is the Goggle Strap holder integrated in the back of the helmet, allowing a better placement of off-road goggles which remain attached to the helmet when not in use.
• New Peak & Visor Button:  The new visor and peak closing button is designed to withstand the most extreme conditions, with a new shape and swivelling screw-shaped fitting, which can be easily placed or removed with no tools or with the help of a simple coin.
• Double D-Ring buckle with X-LOCK magnetic button:  All the X.WRL range helmets include a double-D Ring with the new X-LOCK magnetic button to facilitate final fastening of the chinstrap.
• Removable Chinstrap covers:  The new removable chinstrap covers that can be removed and washed, with great ease, for cleaning mud or dust after more extreme incursions.
• Cheek Pads with emergency strap system V2:  Built into each cheek pad, the Emergency Strap System V2 allows easier and gentle access to an injured rider’s head by trained medical personnel should the need arise.
• Get quick access to water: The new cheek pads with the X-HIDRO system include smart straps that allow you to attach the tube and the mouthpiece of hydration bladders. Simple to install, the cheek pads with X-HIDRO straps are included as standard in all X.WRL helmets.
• Night vision – reflectors
• Special chin shape to reduce breast injury risk from frontal impacts
• Fantastic ventilation featuring the Brow Ventilation System:  Extra vents in the eyebrow area allow increased airflow directly to the forehead and around the head. The vents have been designed to be easy to operate even with winter gloves. Also included are a chin vent and the Air Dynamic System - 5 inlets and 2 outlet air-vents
• Universal Intercom system prepared
• Aerodynamic Peak, with adjustable multi-position system
• Peak extensor:  For Highway or Off-road use, adjustable in movement and no tools required.
• Top Action camera support:  A removable support can be easily inserted in the top of the peak.

SPECIFICATIONS

• Weight: 1250 grs +/- 50 grs - X-PRO CARBON
• 3 shell sizes: XXS-S; M-L; XL-XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

X.WRL: THE NEW ADV-INSPIRED RALLY HELMET DESIGNED FOR LIMITLESS ADVENTURE

Extremely light, comfortable and with impressive ventilation the new X.WRL (Wild Rally) is the ideal choice for those looking for a helmet for more technical and difficult terrain incursions and that can easily accommodate off-road goggles.

FEATURES

• Lighter than ever with the X-PRO Carbon Shell:  All X.WRL models are molded with the brand new X-PRO CARBON technology, which provides an incredible weight of just 1250 grams. Engineered for elite motorcyclists who demand a light-weight helmet, the new X-PRO carbon with 3K carbon fabrics is 10% lighter than other carbon shells and offers higher stiffness and ultimate strength. Everything you’d expect from one of the most advanced carbon fiber helmet technologies ever.
• Comfort comes first: the New X.WRL comes in 3 aerodynamic shell sizes (XXS-S | M-L | XL-XXXL) and 4 EPS liner size fit options to combine more compact dimensions with outstanding fit and comfort. With high-performance fabrics, refined materials and thoughtful details that will surprise you, the X.WRL interior is designed for total comfort and convenience. All liner parts, including the neck roll are removable and washable to make post-adventure cleanups simple, fast and painless. Plus, soft-touch X-Mart Dry fabrics help you to stay cool – featuring a drying rate twice as fast as normal cotton. Plus, the inner lining is made of soft anti-sweat and anti-allergic fabric.
• Neck Brace fit:  The new shell design helps to reduce weight and makes the fit compatible with the use of a neck brace.
• Two visors included and option to purchase a Transitions smart light visor: a clear visor and an Iridium Red visor for road use are both included in the box and prepared for Pinlock use. The panoramic eye port allows for an excellent field of view. Available as an optional accessory to be purchased separately, Transitions® smart light visors automatically adapt to the ideal hue in any light condition, staying clear at night and smoky when exposed to strong light, providing a safe and comfortable ride, at night or any time of day.
• Integrated Goggle Strap Holder:  One of the unique features of the X.WRL is the Goggle Strap holder integrated in the back of the helmet, allowing a better placement of off-road goggles which remain attached to the helmet when not in use.
• New Peak & Visor Button:  The new visor and peak closing button is designed to withstand the most extreme conditions, with a new shape and swivelling screw-shaped fitting, which can be easily placed or removed with no tools or with the help of a simple coin.
• Double D-Ring buckle with X-LOCK magnetic button:  All the X.WRL range helmets include a double-D Ring with the new X-LOCK magnetic button to facilitate final fastening of the chinstrap.
• Removable Chinstrap covers:  The new removable chinstrap covers that can be removed and washed, with great ease, for cleaning mud or dust after more extreme incursions.
• Cheek Pads with emergency strap system V2:  Built into each cheek pad, the Emergency Strap System V2 allows easier and gentle access to an injured rider’s head by trained medical personnel should the need arise.
• Get quick access to water: The new cheek pads with the X-HIDRO system include smart straps that allow you to attach the tube and the mouthpiece of hydration bladders. Simple to install, the cheek pads with X-HIDRO straps are included as standard in all X.WRL helmets.
• Night vision – reflectors
• Special chin shape to reduce breast injury risk from frontal impacts
• Fantastic ventilation featuring the Brow Ventilation System:  Extra vents in the eyebrow area allow increased airflow directly to the forehead and around the head. The vents have been designed to be easy to operate even with winter gloves. Also included are a chin vent and the Air Dynamic System - 5 inlets and 2 outlet air-vents
• Universal Intercom system prepared
• Aerodynamic Peak, with adjustable multi-position system
• Peak extensor:  For Highway or Off-road use, adjustable in movement and no tools required.
• Top Action camera support:  A removable support can be easily inserted in the top of the peak.

SPECIFICATIONS

• Weight: 1250 grs +/- 50 grs - X-PRO CARBON
• 3 shell sizes: XXS-S; M-L; XL-XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

MC PART ID: MMU600+DDM019+MEL021

Fuel x Scalpers Collection - Limited Edition

A tried and true, go-to sweatshirt for all seasons. This fleece sweatshirt is made of cotton, making it one of the softest and most comfortable garments you'll ever wear. With a roomy cut and overlock seams, this striped sweatshirt is sure to become your favorite. Made of 100% cotton fleece with printed logo and contrast overlock seams.

If you love the feeling of freedom and risk, this collection inspired by the motorcycle beach races of the 50s, is for you.

Fuel x Scalpers Collection - Limited Edition

The new FXS Goggles are made in Italy by goggle experts Ethen for Fuel Motorcycles. Basked on the design of Ethen’s popular Scrambler goggles, they  offer an authentic old school look with all the modern technology of today. Show off your skill.

If you love the feeling of freedom and risk, this collection inspired by the motorcycle beach races of the 50s, is for you.

TECHNICAL FEATURES

• Soft and compact frame that fits any kind of helmet
• Comfort foam with COOLMAX layer
• Interchangeable Velcro elastic strap. You can purchase additional/replacement straps here.
• Silicon strip on the back
• Curved UV-protective lens for a wide field of view
• Light-sensitive lens which changes color depending on the light
• Needs maintenance as indicated below in order to maintain the highest performance.
• Only hand wash

The Goldtop 60% wool terry sock keeps you warm and toasty, on or off of the bike! These cosy socks come in three sizes so you can be sure you get a pair that fit and aren't just "One size fits all"

PRODUCT INFO

• Made in England
• 60% Aran wool, 40% Nylon fibre
• Terry loop weave
• Black colour

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Styled leather jacket for street riding

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Leather bomber jacket with high levels of protection

The Travon’s timeless styling honors the heritage and historic journey of an undisputed design classic. Bomber jackets were originally designed to keep WWI pilots warm in breezy, open-air cockpits, but by 1927 had evolved into the classic we know and love – rib-knitted collar, waistband, and cuffs adding extra wind proofing and insulation. This new detailing also shaped the flattering bomber silhouette that’s reflected in the new REV’IT! Travon. Authentic crossover To date the lightest jacket we’ve ever made, the Travon features technology originally engineered for touring and adventure riding. In a sense, it’s a crossover – not that you’d know from its authentic bomber outline. We didn’t want technical innovation to detract from the esthetics: front-zipped and armpit ventilation outlets, SEESMART CE-rated armor at the shoulders and elbows, and an insert for a SEESOFT Type RV back protector take nothing away from this jacket’s iconic styling. Fashion that functions Remixing a classic began by creating a head-turning design that guarantees you look the part – whether you’re out riding or just out and about. But it’s on a ride where you’ll fully get to appreciate just how well it performs: the single-layer stretch lining moves with you, tabs at the collar and waist personalize the fit, plus, the jacket attaches easily to your pants via a double jeans loop.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada. 

Denim motorcycle jeans with CORDURA® for every ride

No need to give today’s motorcycle pants a second thought, the Lewis Selvedge TF is your new go-to garment for riding. 13oz CORDURA® stretch denim offers all the flexibility and comfort you could need on or off your motorcycle, and AA-level – a first in denim for us – impact and abrasion protection make the Lewis an obvious first choice. Raw riding responsiveness We’ve been making motorcycle-specific jeans for a long time, and we’ve built everything we’ve learnt into the REV’IT! Lewis Selvedge: rinsed-wash denim that molds to your body the more you wear it, and stylish selvedge seams for a unique inner pant leg finish that also prevents unraveling and fraying. All our years of experience creating comfortable motorcycle jeans that will last you a lifetime comes together with the age-old, jeans fan-favorite denim weaving technology. Adjustable protection CE-certified armor woven into the fabric protects against impact and abrasion at the knees and hips, while flexible height options on the knee protector pockets let you fine-tune the fit to suit your personal riding style. There’s nothing that we haven’t considered in the Lewis – even the iconic selvedge-unique turn-ups on this new REV’IT! denim has reflective edging integrated for dusk-till-dawn safety.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Styled leather jacket for street riding

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada

Next-generation, 2-layer jacket for adventure riding in any type of weather.

PRODUCT DESCRIPTION

The Stratum (which means layers of rock) GTX motorcycle jacket is our next-generation adventure motorcycle jacket that consists of two outer shells. The base outer shell is comprised of air mesh with built-in protectors and on top of that, a GORE-TEX waterproof outer shell can be used during rides in cold or wet weather. This new two-layer system provides maximum versatility and comfort in any season or any weather conditions.

During rides in Spring/Summer or warmer temperatures, the class AA CE-certified air mesh layer will keep you cool and comfortable; allowing air to flow toward the body. The air mesh motorcycle jacket is equipped with our position-adjustable CE-level 2 SEEFLEX protectors at the elbows as well as a CE-level 2 SEESOFT back protector. An extra upgrade can easily be made by adding our CE-Level 1 chest protectors. The detachable kidney belt provides stability and protection to the lower back area. Additionally, a hydration bag can be fitted in the pocket around back.

When the weather takes a turn for the worse or for when you’re intentionally riding in colder and wet climates, the waterproof 3L GTX laminated shell can be added on top of the air mesh motorcycle jacket, providing maximum waterproofing and weather protection. This waterproof shell is level B CE-certified and combined with the AA Air mesh layer it offers the highest level of protection in our adventure collection. Ventilation zippers on the front, back, and upper arms will direct airflow to your body when the sun is beaming down. The detachable hood - which protects your neck against the elements during riding - can be stored in the XL back pocket when not needed.

Take on any adventure in any weather with the Stratum GTX motorcycle jacket.

COMFORT FEATURES
Adjustability:
Adjustable elbow protection
Adjustment drawcord at hem
Adjustment drawcord at waist
Adjustment tab at cuffs
Adjustment tab at lower arm
elasticated cuff
Elasticated waist
Pockets:
Sleeve pocket
Slit pocket at back
Slit pocket at chest
Two inner pockets
Two slit pockets on front
Two waterproof inner pockets
Two waterproof slit pockets on front
XL storage pocket
Lining:
3D mesh
Mesh
Features:
Adjustment drawcord at hood
Detachable hood
Detachable kidney belt
Double front zipper
External hang loop
Short connection zipper
Soft edge at collar
Stretchable cuff
Stretch at back
Stretch at elbows
Stretch at shoulders
TIZIP® waterproof front zipper

CLIMATE FEATURES

Waterproofing:
3L GORE-TEX fabric

Ventilation:
Panels inside arms
Ventilation panel behind center front zipper
Ventilation panels on back
Zipper at center front
Zipper at upper back
Zippers on upper arms

PROTECTION FEATURES
Protection:
3D mesh protector pockets
Prepared for SEESOFT™ CE-level 1 Divided Insert Chest Protector
Protective print at elbows
SEEFLEX™ CE-level 2 Elbow Protectors
SEEFLEX™ CE-level 2 Shoulder Protectors
SEESOFT AIR CE Level 2 on back
Thumb loops

Outer shell material:
3L GORE-TEX nylon 400D fabric
3L GORE-TEX Pro Armacor fabric
3L nylon 200D GORE-TEX fabric
Neoprene
Polyester mesh
PWR|Shell mesh
PWR|Shell ripstop stretch
PWR|Shell stretch

Visibility:
Laminated reflection at front
Laminated reflection at upper arms
Laminated reflection on back
Laminated reflection on hood
Laminated reflective logo on back

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

All-season laminated GORE-TEX touring trousers with unique features

REV'IT's Poseidon 2 GTX trousers are the perfect match to the Poseidon 2 Jacket. They’re purpose-built for their waterproofing abilities and to keep going when the weather wants you to stop. The outer shell is constructed by mixing 2-layer and 3-layer GORE-TEX® fabrics, which reduce water pick-up to a minimum. The fabric then provides not only the highest level of waterproofing but breathability, too. Protection comes in the form of REV'IT's award-winning SEEFLEX™ CE-level 2 armor, standard at the knees. At the hips, REV'IT have included the breathable and flexible CE-level 1 SEESMART™ protectors.

PROTECTION FEATURES

ERGONOMIC FEATURES

Goldtop England's Flat Tracker Jacket has us wanting to get sideways! A jacket for modern-day riders who appreciate a subtle nod to the more traditional designs of the 1960s and 1970s! Beautifully crafted from 1.4mm Aniline Cowhide with diamond double stitching, all hand finished with traditional ball zips, Stainless Steel fastenings, and a red suede collar and cuffs. This jacket comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for a Knox back protector (optional upgrade).

PRODUCT INFO

• 1.4mm thickness black aniline cowhide leather
• CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
• Optional Knox Micro-lock Compact back protector can be purchased here
• Double-stitched quilting across the collar and shoulders
• Industrial grade hand-polished centre zip with AERO pull
• Trademark Goldtop gold quilted lining
• 4 Zipped external pockets
• 2 Interior chest pockets
• Adjustable cuffs with ball zips
• Stainless Steel adjustable waist buckles and collar snap
• Red suede leather trim inside collar, black suede leather trim inside cuffs and zip guard
• Dropped back

R16 BACKPACK

The R16 gives a rider the confidence to carry keep-dry essentials on the daily commute, knowing on arrival the contents will be perfectly dry, whatever the weather. A super tough, waterproof roll-top daypack with a streamlined, uncluttered design the R16 has a slim profile yet has the capacity for a 15" laptop and a change of clothing. In addition, an internal zip pocket offers separate dry storage for smaller items.

FEATURES

• The Quadloc-Lite™ harness transfers weight from the shoulders to the chest and body, giving all-day riding comfort.

• A waterproof 16 litre roll-top Drypack main body.

• Small internal Drypack zip pocket.

• Air-mesh back panel for rider comfort.

• Removable internal white liner (taped-seam)

• Semi-rigid carry handle.

• Reflective panels on the harness.

• Removable waist strap.

• Hydration reservoir compatible.

• Add additional waterproof storage with hook-on points for a US-Drypack.

• 10 YEAR GUARANTEE

TECH-SPECS

420D Cordura® Lite main construction.

420D nylon rip-stop side panels.

Super tough Hypalon details.

YKK® zip on internal pocket

DIMENSIONS
480(h) x 240(w) x 140(d) mm
18.8(h) x 9.4(w) x 5.5(d) ins.

VOLUME
16 Litres / 976cu in

WEIGHT
1346g / 2.96lb

PRODUCT CODE
KRU16

R22 BACKPACK

The R22 is the ultimate versatile mid-size pack offering 18 litres of waterproof storage in addition to a 4 litre quick access front pocket. Long-term durability comes from a 420D Cordura® and Nylon Ripstop construction, all built on Kriega's groundbreaking Quadloc-Lite™ fully adjustable harness. The feature-rich R22 has the perfect mix of style and functionality, instantly recognisable as an iconic backpack by all-weather riders.

FEATURES

• The Quadloc-Lite™ harness transfers weight from the shoulders to the chest and body, giving all-day riding comfort.

• Waterproof main body - 18 litre Drypack with capacity for 17” laptop.

• 4 litre front pocket storage for easy-access items.

• Air-mesh back panel for rider comfort.

• Removable internal white liner (taped-seam)

• Reflective panels on the harness, reflective logo on rear.

• Four compression straps keep the load stable.

• Removable waist strap.

• Hydration reservoir compatible

• Add additional waterproof storage with hook-on points for a US-Drypack.

• 10 YEAR GUARANTEE

Custom lathed out of Brass and aviation grade 6061t Aluminum.

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap in brass have been knurled for extra grip - the lower threaded part of the cap in aluminum has a spring-bound valve system centrally located in the middle of the bung.

This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.

It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.

FITS ALL YEARS TRIUMPH BONNEVILLE FAMILY BIKES FROM 2001 to NOW

INCLUDING T100, T120, STREET TWIN, STREET CUP, STREET SCRAMBLER, BOBBER, SPEEDMASTER, THRUXTON 900, SCRAMBLER, SE, AMERICA

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THES BIKES (IN BLACK OR POLISH)

FITS ALL HARLEY DAVIDSON WITH SCREW IN CAPS 1983-2018 SPORTSTER, 48, IRON, ETC

MC PART ID: NXS001

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Waterproof, mid-cut boots with PWR|Mesh for multi-season riding

Breccia GTX boots are a blend of motorcycle-specific performance and outdoor styling. Our blueprint is the array of REV’IT! footwear we’ve designed for sportive and adventure touring. You can feel that expertise in every rugged inch of the Breccia GTX boots. And you can experience it in the moments when GORE-TEX Performance Comfort laminate keeps you dry, the PWR|Mesh cools your feet, TPU resists scuffs, and CE-rated SEESOFT ankle disc keeps you safe.

Close comfort
Look closely and you’ll notice these boots employ the BOA® Fit System with M4 dial at the laces. You simply turn the dial for micro-adjustment – push in to engage, twist to tighten, and pull for fast release. So, even when it’s wet and cold, with your gloves on, you can still dial up or down to your preferred fit in a few ticks. Their durability means year after year, you twist again like you did last summer.

Walking the walk
These boots were made for riding… and walking… and climbing up a hill to watch the sun go down – get the picture? OrthoLite® insoles cushion your every step. The chunky outsole creates more stability with its wide footprint combined with an EVA foam midsole, Breccia GTX boots guarantee grip and traction when and where you need it most – both on the motorcycle and when you venture off road by foot.

COMFORT FEATURES
Closure:
Boa® M4 Platform
Lining:
3D mesh
Features:
Gusseted tongue construction
Ortholite® insole Eco-LT Hybrid
Rubber gear shift pad

CLIMATE FEATURES
Waterproofing:
GORE-TEX membrane Vision 3L

PROTECTION FEATURES
Protection:
Reinforced heel
Reinforced toe
SEESOFT ankle discs
Outer shell material:
Artificial Leather
PWR|Mesh
Seamless TPU film

MC PART ID: MMU521

MC PART ID: MSM033

MC PART ID: MMU081 

MC PART ID: CSS015

The TCX Drifter Waterproof Boots are protective and flexible, well-rounded adventure touring boots designed to handle everything your ADV bike was born to do. The integrity of the leather upper is formative enough to flex for walking and shifting comfort, but formidable enough to meet the demands of the trail. With malleolus inserts, calf and shift reinforcements, aluminum buckles and polyurethane shin plates, the waterproof-lined TCX Drifter Boots are prepared for off-road adventure. The lug sole achieves grip in any terrain, wet or dry, so your footing will never falter in the TCX Drifter WP Boots.

Grain leather upper with pull-up finishing; microfibre front and rear padded area. Rear reflex insert. Ergonomic stretch upper collar to keep outside dirt and debris

Details:

• UPPER: Full- Grain leather upper with pull-up finishing; microfibre front and rear padded area. Rear reflex insert. Ergonomic stretch upper collar to keep dirt and debris on the outside where it belongs
• LINING: T-DRY waterproof membrane
• REINFORCEMENTS: Ergonomic polyurethane shin plate and malleolus, reinforced toe and heel; leather shift pad
• CLOSURE: 3 adjustable aluminium ALU6060 buckles, ergonomic design
• FOOTBED: OrthoLite® footbed with long term cushioning and high level of breathability
• SOLE: Rubber outsole with deep lugs to offer a superior traction on any terrain. "Ideal" stitching construction technique

The Finer Details:

• The "Ideal" construction technique is a craft-based construction process that guarantees comfort, hard-wearing resistance and flexibility for footwear thanks to a totally traditional production process. The leather upper, prepared with the outer edges bonded and pressed onto a dedicated midsole, is stitched vertically. The yarn is dipped in a purpose-designed boiler full of melted tar to ensure total waterproofness. The result is top quality, durable footwear.
• OrthLite Footbed: Long-term cushioning:
• OrthoLite® foam compresses less than 5% of its thickness over the lifetime of the footbed, so the cushioning, fit, comfort and performance never change.
• High level breathability: the open-cells of the OrthoLite® foam allow air to circulate in and around the footbed, moving moisture away and keeping feet cooler and drier.

• 73% Cotton, 23% Polyamide, 4% Elastane
• Double tubed with ultra-fine stitching along each checker for enhanced shape retention & fit when worn over face
• 2-Way stretch across the width for perfect grip and fit
• Measure around head to gauge fit - most men will require size Large
• Made in England

MC PART ID: MTE182

MC PART ID: MMU592

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Stay casual while you ride with the Parabolica stretch jacket.

For many urban riders, comfort of moto gear ranks pretty highly on the requirements list. Something that allows for freedom of movement, looks great and has a good vibe to it. Well, that sums up the Parabolica motorcycle jacket nicely.

It comes with a clean yet angularly cut construction, handy front pockets, and a fixed hood (complete with a snap button to hold it down when riding). Furthermore, its stretch characteristics give you that flexibility you need in a sport bike fit garment.

Feel good – and look good - out on the road on any of your city rides with the Parabolica motorcycle jacket

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

Italian outfit Holy Freedom has been producing quality motorcycle tube scarfs for years and has a wide range of designs and materials to suit any occasion.

Thanks to the pandemic the world’s going crazy for face masks, but if you ride a motorcycle, there are plenty of other good reasons to wear a tube scarf: 

• Whether you wear a full face or open face helmet tube scarfs can make a huge difference to your level of comfort by helping to keep the cold off the neck and face.
• It can be worn in many ways such as a balaclava, neck warmer, and headband.
• Ideal for all sports: motorcycling, running, tennis, cycling, beach volleyball, skiing, snowboarding, climbing, and others.
• Constructed without any seams to offer improved comfort and the benefit of increased elasticity for a multitude of fitment styles.
• An antibacterial treatment also means they’ll stay smelling fresh for longer.
• Superior stretch
• Moisture management
• Lightweight
• Stops the wind

Italian outfit Holy Freedom has been producing quality motorcycle tube scarfs for years and has a wide range of designs and materials to suit any occasion.

Thanks to the pandemic the world’s going crazy for face masks, but if you ride a motorcycle, there are plenty of other good reasons to wear a tube scarf: 

• Whether you wear a full face or open face helmet tube scarfs can make a huge difference to your level of comfort by helping to keep the cold off the neck and face.
• It can be worn in many ways such as a balaclava, neck warmer, and headband.
• Ideal for all sports: motorcycling, running, tennis, cycling, beach volleyball, skiing, snowboarding, climbing, and others.
• Constructed without any seams to offer improved comfort and the benefit of increased elasticity for a multitude of fitment styles.
• An antibacterial treatment also means they’ll stay smelling fresh for longer.
• Superior stretch
• Moisture management
• Lightweight
• Stops the wind

The benefits of tube scarfs for motorcyclists compared to regular scarfs or face masks are many:

• No risk of anything coming loose and flying off, or worse still, getting caught in a spinning object.
• Tube scarfs also offer increased coverage over their alternatives so their insulating benefits are superior.
• Can be pulled up to cover the nose and mouth which can keep out the cold or dust and road debris, or used as a face covering during this crazy COVID-19 time.
• Due to the stretchy nature of the material used in their construction, these tube scarfs can be worn in many different ways, doubling as headbands, balaclavas, wristbands, hair ties, and much more.
• They come in a wide range of printed designs to suit your style.
• As an added bonus, the tube scarf is made of Repreve 100% recycled material, so they're also kind to the environment.

Italian outfit Holy Freedom has been producing quality motorcycle tube scarfs for years and has a wide range of designs and materials to suit any occasion.

Thanks to the pandemic the world’s going crazy for face masks, but if you ride a motorcycle, there are plenty of other good reasons to wear a tube scarf: 

• Whether you wear a full face or open face helmet tube scarfs can make a huge difference to your level of comfort by helping to keep the cold off the neck and face.
• It can be worn in many ways such as a balaclava, neck warmer, and headband.
• Ideal for all sports: motorcycling, running, tennis, cycling, beach volleyball, skiing, snowboarding, climbing, and others.
• Constructed without any seams to offer improved comfort and the benefit of increased elasticity for a multitude of fitment styles.
• An antibacterial treatment also means they’ll stay smelling fresh for longer.
• Superior stretch
• Moisture management
• Lightweight
• Stops the wind

MC PART ID: MSM030

MC PART ID: ADT002

MC PART ID: MMU550 

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Modern heritage boots with GTX membrane

Copperhead GTX are high-performance both on and off your motorcycle – you’ll look and feel the part in these eight-hole, high-cut, lace-up boots. Bold, contemporary outdoor styling blended with classic leather craftsmanship set performance standards only the latest technical materials can achieve. Boots with balance Copperhead GTX boots blend technical performance and rugged design to give them a light, airy feel. The body of the boot is suede leather – meticulously oiled and waxed for longevity and ease of breaking in. For all-round airflow to the ankle, there are PWR|Mesh panels on both sides of the upper ankle, while a GORE-TEX membrane ensures waterproof breathability. Comfort that weighs less The Vibram® rubber outsole and Ortholite® insoles cosset your feet to dial up the comfort, and adding only 90 grams per boot, they’re also ever so nimble. At every twist, turn, gear change, and braking maneuver, you can grip the pedals with confidence, and for added reassurance, there’s CE-rated SEESOFT ankle disc protection and a reinforced toe cap.

OLD SCHOOL RACING. PREMIUM MATERIALS.

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 2 (XS-M | L-XXL)
• PC Lexan flat shield
• Prepared for the use of Raleri Anti-Fog system
• Double-D ring buckle
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin wind stopper
• Chin Ventilation with adjustable position open/close

SPECIFICATIONS

• Weight: 1350grs +/- 50 grs
• Shell Sizes: 2 (XS-M | L-XXL)
• Homologation: ECE/22-05,DOT e NBR-7471:2001

OLD SCHOOL RACING. PREMIUM MATERIALS.

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 2 (XS-M | L-XXL)
• PC Lexan flat shield
• Prepared for the use of Raleri Anti-Fog system
• Double-D ring buckle
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin wind stopper
• Chin Ventilation with adjustable position open/close

SPECIFICATIONS

• Weight: 1350grs +/- 50 grs
• Shell Sizes: 2 (XS-M | L-XXL)
• Homologation: ECE/22-05,DOT e NBR-7471:2001

SX.100R: URBAN MEETS SPORT

LIGHTWEIGHT THERMOPLASTIC HELMET: Thanks to many hours spent in Aerodynamic studies and wind-tunnel tests the SX.100R’s special shape allows a relatively lightweight helmet, with a sporty design that optimizes both stability and soundproofing at high speed. 

The SX.100R is equipped with a double-blade air spoiler at the rear, designed to optimize aerodynamic performance and reduce turbulence at high speeds.

SPECIFICATIONS

• ATR/PC shell
• One shell size: XS-XXL
• PC Lexan shield with X-SWIFT Quick Release System:
• Quick release visor mechanism; makes changing visors extremely simple and quicker than ever (less than 8 seconds) and tool free
• Visor prepared for Pinlock
• Outstanding eye port: SX.100 eye port is extremely wide and offers an increased feeling of openness inside the helmet, a sense of freedom ideal for all urban conditions. The visor is an optical class 1 anti-scratch and prepared for the use with a Pinlock Fog-Free lens.
• Inner sunvisor
• Micro-metric buckle
• X-MART Dry Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Anti-noise cheek pads
• Removable neck roll
• Chin Wind stopper
• 2 inlet and 2 outlet air-vents (Air Dynamic System)
• Visor ventilation system
• Removable breath guard
• Aerodynamic rim
• Rear spoiler for optimized aerodynamic performance
• Prepared for NEXX Intercom system X-COM
• Weight: 1525 grs +/- 50 grs
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

A VERSATILE GO-ANYWHERE DO-ANYTHING OFF-ROAD MODULAR HELMET

The Nexx X.VILIJORD sits comfortably at the premium-level of NEXX’s helmet range. Designed to be versatile and simple, focused on what matters the most to demanding motorcycle Adventure riders. While most motorcycle helmets often cater to either paved or off-road exploration, the X.VILIJORD bridges the gap.

A BREATH OF FRESH AIR

Breathe deeply, naturally and in fullness. The generous Air Dynamic System ventilation, featuring two air intakes and two outlets, allows the constant renewal of fresh air inside the helmet.

KEEP YOUR HEAD WARM ON THOSE COLD DAYS

A specially developed Winter Membrane offers better control over air flow. It can be disabled by folding it to the back part of the inner liner, in case of extreme weather changes.

FEATURES

• Carbon Fiber Shell
• Shell Sizes: 3 (XXS-S | M-L | XL-XXXL)
• Off Road Peak, aerodynamic and light; designed to provide additional direct air intake and reduce buffeting and vibration at high speed
• Adjustable and removable peak extensor for best sunlight protection
• Aerodynamic design, developed to minimize fatigue on long trips, with the mask closed or open
• Winter Membrane to reduce cool air flow on cold days
• Off road chin ventilation designed for optimal use in dust and mud environments
• Morfofit – ergonomic fitting of the cheek pads
• Easy to operate mask button and with involuntarily opening safety mechanism
• 360º Super Locker with double pivot for maximum mask safety when raised
• Special developed rubber sealing around the mask and the shield for optimum Acoustic Isolation
• PC Lexan Shield Clear with Anti-Fog position and central lock
• X-SWIFT Quick Release visor mechanism
• Visor with recessed cavity for Pinlock
• Panoramic Eye Port
• Integrated Sun Visor with Ergonomic Button Mechanism
• Micro-Metric buckle stainless steel
• Night vision – reflectors on the side, front and back of the helmet
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Easy Fit for wearing eye glasses
• Air Dynamic System - 2 inlet and 2 outlet air-vents
• Removable Breath Guard
• NEXX X.COM 2 Intercom system prepared, with “Plug & Play” easy setup
• Removable Action Camera support on top and side
• Doubly certified as both a Full Face and Jet Helmet

SPECIFICATIONS

• Weight: 1700 grs +/- 50 grs
• Sizes: XXS to XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

X.WRL: THE NEW ADV-INSPIRED RALLY HELMET DESIGNED FOR LIMITLESS ADVENTURE

Extremely light, comfortable and with impressive ventilation the new X.WRL (Wild Rally) is the ideal choice for those looking for a helmet for more technical and difficult terrain incursions and that can easily accommodate off-road goggles.

FEATURES

• Lighter than ever with the X-PRO Carbon Shell:  All X.WRL models are molded with the brand new X-PRO CARBON technology, which provides an incredible weight of just 1250 grams. Engineered for elite motorcyclists who demand a light-weight helmet, the new X-PRO carbon with 3K carbon fabrics is 10% lighter than other carbon shells and offers higher stiffness and ultimate strength. Everything you’d expect from one of the most advanced carbon fiber helmet technologies ever.
• Comfort comes first: the New X.WRL comes in 3 aerodynamic shell sizes (XXS-S | M-L | XL-XXXL) and 4 EPS liner size fit options to combine more compact dimensions with outstanding fit and comfort. With high-performance fabrics, refined materials and thoughtful details that will surprise you, the X.WRL interior is designed for total comfort and convenience. All liner parts, including the neck roll are removable and washable to make post-adventure cleanups simple, fast and painless. Plus, soft-touch X-Mart Dry fabrics help you to stay cool – featuring a drying rate twice as fast as normal cotton. Plus, the inner lining is made of soft anti-sweat and anti-allergic fabric.
• Neck Brace fit:  The new shell design helps to reduce weight and makes the fit compatible with the use of a neck brace.
• Two visors included and option to purchase a Transitions smart light visor: a clear visor and an Iridium Red visor for road use are both included in the box and prepared for Pinlock use. The panoramic eye port allows for an excellent field of view. Available as an optional accessory to be purchased separately, Transitions® smart light visors automatically adapt to the ideal hue in any light condition, staying clear at night and smoky when exposed to strong light, providing a safe and comfortable ride, at night or any time of day.
• Integrated Goggle Strap Holder:  One of the unique features of the X.WRL is the Goggle Strap holder integrated in the back of the helmet, allowing a better placement of off-road goggles which remain attached to the helmet when not in use.
• New Peak & Visor Button:  The new visor and peak closing button is designed to withstand the most extreme conditions, with a new shape and swivelling screw-shaped fitting, which can be easily placed or removed with no tools or with the help of a simple coin.
• Double D-Ring buckle with X-LOCK magnetic button:  All the X.WRL range helmets include a double-D Ring with the new X-LOCK magnetic button to facilitate final fastening of the chinstrap.
• Removable Chinstrap covers:  The new removable chinstrap covers that can be removed and washed, with great ease, for cleaning mud or dust after more extreme incursions.
• Cheek Pads with emergency strap system V2:  Built into each cheek pad, the Emergency Strap System V2 allows easier and gentle access to an injured rider’s head by trained medical personnel should the need arise.
• Get quick access to water: The new cheek pads with the X-HIDRO system include smart straps that allow you to attach the tube and the mouthpiece of hydration bladders. Simple to install, the cheek pads with X-HIDRO straps are included as standard in all X.WRL helmets.
• Night vision – reflectors
• Special chin shape to reduce breast injury risk from frontal impacts
• Fantastic ventilation featuring the Brow Ventilation System:  Extra vents in the eyebrow area allow increased airflow directly to the forehead and around the head. The vents have been designed to be easy to operate even with winter gloves. Also included are a chin vent and the Air Dynamic System - 5 inlets and 2 outlet air-vents
• Universal Intercom system prepared
• Aerodynamic Peak, with adjustable multi-position system
• Peak extensor:  For Highway or Off-road use, adjustable in movement and no tools required.
• Top Action camera support:  A removable support can be easily inserted in the top of the peak.

SPECIFICATIONS

• Weight: 1250 grs +/- 50 grs - X-PRO CARBON
• 3 shell sizes: XXS-S; M-L; XL-XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

X.WRL: THE NEW ADV-INSPIRED RALLY HELMET DESIGNED FOR LIMITLESS ADVENTURE

Extremely light, comfortable and with impressive ventilation the new X.WRL (Wild Rally) is the ideal choice for those looking for a helmet for more technical and difficult terrain incursions and that can easily accommodate off-road goggles.

FEATURES

• Lighter than ever with the X-PRO Carbon Shell:  All X.WRL models are molded with the brand new X-PRO CARBON technology, which provides an incredible weight of just 1250 grams. Engineered for elite motorcyclists who demand a light-weight helmet, the new X-PRO carbon with 3K carbon fabrics is 10% lighter than other carbon shells and offers higher stiffness and ultimate strength. Everything you’d expect from one of the most advanced carbon fiber helmet technologies ever.
• Comfort comes first: the New X.WRL comes in 3 aerodynamic shell sizes (XXS-S | M-L | XL-XXXL) and 4 EPS liner size fit options to combine more compact dimensions with outstanding fit and comfort. With high-performance fabrics, refined materials and thoughtful details that will surprise you, the X.WRL interior is designed for total comfort and convenience. All liner parts, including the neck roll are removable and washable to make post-adventure cleanups simple, fast and painless. Plus, soft-touch X-Mart Dry fabrics help you to stay cool – featuring a drying rate twice as fast as normal cotton. Plus, the inner lining is made of soft anti-sweat and anti-allergic fabric.
• Neck Brace fit:  The new shell design helps to reduce weight and makes the fit compatible with the use of a neck brace.
• Two visors included and option to purchase a Transitions smart light visor: a clear visor and an Iridium Red visor for road use are both included in the box and prepared for Pinlock use. The panoramic eye port allows for an excellent field of view. Available as an optional accessory to be purchased separately, Transitions® smart light visors automatically adapt to the ideal hue in any light condition, staying clear at night and smoky when exposed to strong light, providing a safe and comfortable ride, at night or any time of day.
• Integrated Goggle Strap Holder:  One of the unique features of the X.WRL is the Goggle Strap holder integrated in the back of the helmet, allowing a better placement of off-road goggles which remain attached to the helmet when not in use.
• New Peak & Visor Button:  The new visor and peak closing button is designed to withstand the most extreme conditions, with a new shape and swivelling screw-shaped fitting, which can be easily placed or removed with no tools or with the help of a simple coin.
• Double D-Ring buckle with X-LOCK magnetic button:  All the X.WRL range helmets include a double-D Ring with the new X-LOCK magnetic button to facilitate final fastening of the chinstrap.
• Removable Chinstrap covers:  The new removable chinstrap covers that can be removed and washed, with great ease, for cleaning mud or dust after more extreme incursions.
• Cheek Pads with emergency strap system V2:  Built into each cheek pad, the Emergency Strap System V2 allows easier and gentle access to an injured rider’s head by trained medical personnel should the need arise.
• Get quick access to water: The new cheek pads with the X-HIDRO system include smart straps that allow you to attach the tube and the mouthpiece of hydration bladders. Simple to install, the cheek pads with X-HIDRO straps are included as standard in all X.WRL helmets.
• Night vision – reflectors
• Special chin shape to reduce breast injury risk from frontal impacts
• Fantastic ventilation featuring the Brow Ventilation System:  Extra vents in the eyebrow area allow increased airflow directly to the forehead and around the head. The vents have been designed to be easy to operate even with winter gloves. Also included are a chin vent and the Air Dynamic System - 5 inlets and 2 outlet air-vents
• Universal Intercom system prepared
• Aerodynamic Peak, with adjustable multi-position system
• Peak extensor:  For Highway or Off-road use, adjustable in movement and no tools required.
• Top Action camera support:  A removable support can be easily inserted in the top of the peak.

SPECIFICATIONS

• Weight: 1250 grs +/- 50 grs - X-PRO CARBON
• 3 shell sizes: XXS-S; M-L; XL-XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell sizes: 2 (XS-M | L-XXL)
• PC Lexan Shield
• Prepared for the use of Raleri Anti-Fog system
• Double-D ring buckle
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin Wind stopper (optional accessory; not included)
• Peak and visor included
• Chin Ventilation

SPECIFICATIONS

• Weight: 1350 grs +/- 50 grs
• Shell sizes: 2 (XS-M | L-XXL)
• Homologation: ECE/22-05, DOT e NBR-7471:2001

OLD SCHOOL RACING. PREMIUM MATERIALS.

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 2 (XS-M | L-XXL)
• PC Lexan flat shield
• Prepared for the use of Raleri Anti-Fog system
• Double-D ring buckle
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin wind stopper
• Chin Ventilation with adjustable position open/close

SPECIFICATIONS

• Weight: 1350grs +/- 50 grs
• Shell Sizes: 2 (XS-M | L-XXL)
• Homologation: ECE/22-05,DOT e NBR-7471:2001

OLD SCHOOL RACING. PREMIUM MATERIALS.

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 2 (XS-M | L-XXL)
• PC Lexan flat shield
• Prepared for the use of Raleri Anti-Fog system
• Double-D ring buckle
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Chin wind stopper
• Chin Ventilation with adjustable position open/close

SPECIFICATIONS

• Weight: 1350grs +/- 50 grs
• Shell Sizes: 2 (XS-M | L-XXL)
• Homologation: ECE/22-05,DOT e NBR-7471:2001

A VERSATILE GO-ANYWHERE DO-ANYTHING OFF-ROAD MODULAR HELMET

The Nexx X.VILIJORD sits comfortably at the premium-level of NEXX’s helmet range. Designed to be versatile and simple, focused on what matters the most to demanding motorcycle Adventure riders. While most motorcycle helmets often cater to either paved or off-road exploration, the X.VILIJORD bridges the gap.

A BREATH OF FRESH AIR

Breathe deeply, naturally and in fullness. The generous Air Dynamic System ventilation, featuring two air intakes and two outlets, allows the constant renewal of fresh air inside the helmet.

KEEP YOUR HEAD WARM ON THOSE COLD DAYS

A specially developed Winter Membrane offers better control over air flow. It can be disabled by folding it to the back part of the inner liner, in case of extreme weather changes.

FEATURES

• X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile; organic fibers)
• Shell Sizes: 3 (XXS-S | M-L | XL-XXXL)
• Off Road Peak, aerodynamic and light; designed to provide additional direct air intake and reduce buffeting and vibration at high speed
• Adjustable and removable peak extensor for best sunlight protection
• Aerodynamic design, developed to minimize fatigue on long trips, with the mask closed or open
• Winter Membrane to reduce cool air flow on cold days
• Off road chin ventilation designed for optimal use in dust and mud environments
• Morfofit –ergonomic fitting of the cheek pads
• Easy to operate mask button and with involuntarily opening safety mechanism
• 360º Super Locker with double pivot for maximum mask safety when raised
• Special developed rubber sealing around the mask and the shield for optimum Acoustic Isolation
• PC Lexan Shield Clear with Anti-Fog position and central lock
• X-SWIFT Quick Release visor mechanism
• Visor with recessed cavity for Pinlock
• Panoramic Eye Port
• Integrated Sun Visor with Ergonomic Button Mechanism
• Micro-Metric buckle stainless steel
• Night vision – reflectors on the side, front and back of the helmet
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Easy Fit for wearing eye glasses
• Air Dynamic System - 2 inlet and 2 outlet air-vents
• Removable Breath Guard
• NEXX X.COM 2 Intercom system prepared, with “Plug & Play” easy setup
• Removable Action Camera support on top and side
• Doubly certified as both a Full Face and Jet Helmet

SPECIFICATIONS

• Weight: 1800 grs +/- 50 grs
• Sizes: XXS to XXXL
• Homologation: ECE/22-05, DOT FMVSS 218 e NBR-7471:2001

Custom lathed out of aviation grade 6061t Aluminum.

This sale is for the complete new cap fully assembled and ready to fit on your bike.  This version has spun Satin Finish.

Sides of the top cap knurled for extra grip - the lower threaded part of the cap has a spring-bound valve system centrally located in the middle of the bung.

This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.

It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.

FITS ALL YEARS TRIUMPH BONNEVILLE FAMILY BIKES FROM 2001 to NOW INCLUDING T100, T120, STREET TWIN, STREET CUP, STREET SCRAMBLER, BOBBER, SPEEDMASTER, THRUXTON 900, SCRAMBLER, SE, AMERICA

IF YOU HAVE A BIKE WITH A FAUX STOCK MONZA (SCRAMBLER 1200/SPEED TWIN 1200/THRUXTON 1200) YOU CAN STILL USE ALL OUR CAPS BUT FOR THE BEST OPTICS FIT ALONGSIDE THE RING ADAPTER WE ALSO MAKE FOR THES BIKES (IN BLACK OR POLISH)

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018 PRESENT SPORTSTER, 48, IRON ETC

MC PART ID: NXS010

Custom lathed out of aviation grade 6061t Aluminum.

This sale is for the complete new cap fully assembled and ready to fit on your bike.

Sides of the top cap knurled for extra grip - the lower threaded part of the cap has a spring-bound valve system centrally located in the middle of the bung.

This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.

It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.

Some models it will fit include Bonneville, T100, America, Speedmaster, Thruxton. It will also fit on all post 1983 Harleys with regular right hand thread

FITS ALL YEARS BONNEVILLE THRUXTON, AMERICA, T100, SPEEDMASTER, SE, SCRAMBLER, BOBBER, STREET TWIN, STREET CUP, STREET SCRAMBLER, T120: 2001-2018 Present - Fits both CARB and EFI bikes.

FITS ALL YEARS HARLEY DAVIDSON WITH SCREW DOWN CAP 1981-2018 PRESENT SPORTSTER, 48, IRON ETC

MC PART ID: NXS006

MC PART ID: MSM025

MC PART ID: MSM037