MOTORCYCLE PARTS

Laser cut out of steel and powder coated Black these brackets are designed to work with the bolt spacing on any of our Round tail lights (Eldorado, Bel Air, Miller, Lecter, Cuda, etc) 

You can use this bracket anywhere on the bike: it also is designed to slide in between our fender light bracket and our tail lights in an assembly (e.g. Eldorado fender light kit) so you can mount a plate with them, with the down facing lights on the tail light illuminating the plate. 

Often used in Combination with our Rear Mudguards such as the Motone High-Tail Custom Mudguard.

NOTE: Motone Fender Light Kit (e.g. Eldorado) and wiring loom (e.g. DDM012) must be purchased separately. Please click on the links if you'd like to add these to your cart as well.

MC PART ID: PTS012

Tail Tidy Plate 2.0 with Storage Tray and Motone Eldorado Tail Light Integrated

Our latest iteration of the kit comes with modular removable Indicator bracket which means that for those who want to mount the signals elsewhere its even easier.

Suitable for Liquid Cooled Triumph Twins from 2016 and up

Namely - Street Twin / Street Cup / Street Scrambler / T100 / T120

Plug and play wiring loom as follows 

Our Adapter comes both colour and letter coded with each function banded together and labelled for easy use.

It also utilises all 6 of the stock loom plugs giving you an extra live connector to run any auxiliary devices 

T : Tail light - 

RED - BRAKE Light

YELLOW - RUNNING Light

BLACK - Earth

L : Left Indicator/Turn Signal

BROWN - LHS Signal

BLACK - Earth

R : Right Indicator/Turn Signal

ORANGE - RHS Signal

BLACK - Earth

A : Auxiliary Live

GREEN - AUX

BLACK - Earth  

Note : 6-Way loom connector hermetically sealed to prevent water ingress

MC PART ID: 

CBS004+MEL004+DDM012

TRIUMPH SCRAMBLER 1200 XC-XE PLATE HOLDER HIGH

The stock rear plastic on the Scrambler 1200 bothered us, so we made this high mount plate holder to fix it and the end result is fantastic: once mounted it is one with the rest of the bike. Made of steel tube painted black with epoxy powders. It is supplied complete with a removable and height-sliding LED license plate light, a protective casing to close the lower area of the mudguard to replace the original plastic, screws, and vibration dampers. It is very simply fixed to the frame and allows you to significantly change the character and style of the bike at the rear by shortening and raising the number plate. Complete with all necessary mounting hardware, it is compatible with all Unit Garage pannier racks or luggage racks.

Code: 3148 

Tail Tidy Plate 2.0 with Storage Tray and Motone GORT Tail Light Integrated

Our latest iteration of the kit comes with modular removable Indicator bracket which means that for those who want to mount the signals elsewhere its even easier.

• Suitable for Liquid Cooled Triumph Twins from 2016 and up, namely: Street Twin / Street Cup / Street Scrambler / T100 / T120
• Plug and play wiring loom
• Adapter comes both colour and letter coded with each function banded together and labelled for easy use.
• It also utilises all 6 of the stock loom plugs giving you an extra live connector to run any auxiliary devices 
• T : Tail light - RED - BRAKE Light; YELLOW - RUNNING Light; BLACK - Earth
• L : Left Indicator/Turn Signal; BROWN - LHS Signal; BLACK - Earth
• R : Right Indicator/Turn Signal; ORANGE - RHS Signal; BLACK - Earth
• A : Auxiliary Live; GREEN - AUX; BLACK - Earth   

Note : 6-Way loom connector hermetically sealed to prevent water ingress

MC PART ID: CBS004+MEL525+DDM021

Motone Tail tidy kit with Motone 2.0 Lucas Light and integrated internal Storage Tray Area plus Plug and Play (fit at home) wiring loom kit. 

Various other tail tidy kits are available - we believe ours is the best.  Both in terms of design and execution.

The Motone Kit is designed from the ground up in cad and is built from aviation grade aluminium and supplied anodized in black.  We designed our kit with an internal storage tray area which adds functionality and much needed storage space (for bike lock, wallet etc) to the stock bike.  

You may find some videos available on youtube which will illustrate how to fit and what the kit looks like when fitted etc. 

Tail Tidy Kit Suitable for Liquid Cooled Triumph Twins from 2016 and up Namely -

• Street Twin / Street Cup / Street Scrambler
• T100 / T120

Plug and play wiring loom as follows: 

• Our Adapter comes both colour and letter coded with each function banded together and labelled for easy use.
• It also utilizes all 6 of the stock loom plugs giving you an extra live connector to run any auxiliary devices 
• T : Tail light - RED - BRAKE Light; YELLOW - RUNNING Light; BLACK - Earth
• L : Left Indicator/Turn Signal - BROWN - LHS Signal; BLACK - Earth
• R : Right Indicator/Turn Signal - ORANGE - RHS Signal; BLACK - Earth
• A : Auxiliary Live - GREEN - AUX; BLACK - Earth  

Note : 6-Way loom connector hermetically sealed to prevent water ingress

MC PART ID: CBS003+MTE043+DDM021

MC PART ID: MMU600+DDM019+MEL021

MC PART ID: MMU607+MMU604+MLP001

This new version is compatible with the Liquid cooled bikes and can be fitted either on the Left or Right side of the bike (so its possible to purchase 2 of the kits to fit one on either side of the bike).

Designed to fit and tested on the Street Twin, Street Cup, Street Scrambler, T100, T120, Thruxton R, Thruxton, Speed Twin

May also fit more models

MC PART ID: MMU072

Hot Forged out of Solid Brass Billets, machined and then Polished these fork top caps are easy enough to swap out and add some brass to your bike - they are also designed to fit well with The Boss our brass Yoke Nut

This particular listing is for the 47mm Fork Bobber Black, which is also the fork used on the Speedmaster from 2021 On 

For Speedmasters from 2002-2016 you need part MMU512 ,  for the 41mm Liquid Cooled Speedmasters 2018-2020 You need part MMU514

MC PART ID: MMU516

Machined out of CZ121 Brass Billet - Yoke Nut is suitable for use on all the 2016 and Up Triumph Twin Motorcycles 

Also known as Triple Tree Nut / Steering Stem Nut and Top Yoke Nut 

Fits the following Liquid Cooled (LC) Triumph Bikes:

• Street Twin (Speed Twin 900)
• Speed Twin
• Street Scrambler (Scrambler 900)
• Street Cup
• Bobber
• Speedmaster
• Thruxton
• Scrambler 1200
• T100
• T120

Please note if you have a 2001-2015 Bonnie check out MMU069 instead

MC PART ID: MMU068

MC PART ID: MMU012

MC PART ID: MMU016

The Triumph England M/C Clutch Cover Badge adds just the right amount of nostalgia to your modern classic liquid cooled Triumph Twin. These badges are 100% Canadian made:  designed, machined, anodized and engraved right here in our hometown of Edmonton. Made of aluminium, these are a tasty replacement for the stock clutch badge to give your bike a more custom feel. The badge reuses the original fasteners that hold the clutch badge in place. We suggest using a medium threadlocker (e.g., Blue Loctite) on the fasteners to avoid them vibrating loose over time.

FEATURES

• Suitable for all the 900 and 1200cc Triumph Twins from 2016 to now.
• Quality made from aluminium and 100% designed and manufactured in Edmonton, Alberta, Canada.
• Precision fit part - Bolt on - Fit at home
• Fits all the new liquid cooled Triumph twins: Street Twin/Speed Twin 900, Street Cup, Street Scrambler/Scrambler 900, T100, T120, Scrambler 1200, Speed Twin 1200, Bobber, Speedmaster

MC PART ID: MMU548

MC PART ID: MMU549

MC PART ID: MMU021

MC PART ID: MMU031

MC PART ID: MMU032

MC PART ID: MMU022

CNC Cut from billet aviation 6061-T6 aluminum - fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars.

Some models it will fit include Bonneville, T100, America, T120, Speedmaster, Thruxton.

MC PART ID: SNG215

High Pressure Die Cast aluminium with domed ribbed Union Jack design

Top face is mirror polished

Fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars.

Fits: Bonneville, T100, America, T120, Speedmaster, Thruxton, Bobber

MC PART ID: MMU074

Forged out of Solid Brass with Union Jack Flag Design - we have also shot blast the piece after forging and then mirror polished the outside faces to give contrast to the design. 

Fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round-shaped reservoirs as fitted to some models with 7/8s bars.

Fits : Bonneville, T100, America, T120, Speedmaster, Thruxton, Bobber

MC PART ID: MMU510

We recommend to use thread locker when fitting this and many other parts to your motorcycle.

NOTE: Does NOT fit Scrambler 1200, Speed Twin 1200, or Thruxton 1200 R/RS

MC PART ID: GSS005

Double sided Moto Bar Pad fits on Biltwell Moto Bars and other crossbar-equipped handlebars. 8.25” long, 2” OD and a ¾” foam core pad will go a long way towards keeping your teeth in your mouth.

The VANS x CULT MOTORCYCLE waffle grip is finally here...

CULT's long-lasting collaboration with VANS has just gotten better... The best grip in the industry has now made it to motorcycles... Available in both 7/8" and 1" in a variety of colors... They feature the classic Vans waffle sole pattern with a domed center section for improved comfort and vibration dampening... The grip was designed by Cult and sent to ODI for production. Using their proprietary rubber compound, we have created a grip that we hope will become as much of a classic as a pair of Vans. 

These are meant to slide on like any other standard rubber grip... A throttle tube is required for these grips to work on your MC... Grip does not include a built-in throttle tube... Each set comes with two grips, one grip with a small inside diameter to slide over the handlebar and another grip with a larger inside diameter that slides over the throttle side...125mm length. Sold in pairs. Made in the USA by ODI... 

The universal rubber grip for handlebars with 1 inch or 22 mm (7/8 inch) tube diameter.

The mo.grip soft is a universal rubber grip for handlebars with a 1 inch or 22 mm (7/8 inch) tube diameter with an attractive look.

Its dimensions and grip profile are just as characteristic as the mo.grip aluminum grip.

Like the aluminum grip, it fits perfectly with the mo.blaze disc or mo.blaze cone handlebar end blinker and, together with the mo.switch mini, creates an extremely harmonious handlebar design.

Technical Data:

• Inner diameter (22mm): left 22 mm / right 24.5 mm (throttle grip)
• Inner diameter (1 inch): left 25.4 mm / right 27.5 mm (throttle grip)
• Outer diameter: 35 mm
• Width: 123 mm

What's Included?

1 pair of rubber grips mo.grip soft

RIZOMA CLUTCH LEVER 3D BLACK

Features:

• Machined from billet aluminum
• 3D machining
• Light weight and aerodynamic
• Extreme grip and wide adjustment
• Articulated joint to prevent breakage
• Interchangeable colored ring kit
• Rizoma Part Numbers: LCJ801B & LCJ803B

***Note: contact us or visit the Rizoma website to determine the part number that fits your bike: http://www.rizoma.com/universal/brake-clutch-levers/leve-3d/en

RIZOMA BRAKE LEVER 3D BLACK

Features:

• Machined from billet aluminum
• 3D machining
• Light weight and aerodynamic
• Extreme grip and wide adjustment
• Articulated joint to prevent breakage
• Interchangeable colored ring kit
• Rizoma part number LBJ100B

***Note: contact us or visit the Rizoma website to determine the part number that fits your bike: http://www.rizoma.com/universal/brake-clutch-levers/leve-3d/en

The Rizoma Proguard Lever Protection System is a protection device designed for either the brake and clutch levers. Designed and developed for racing, the Proguard System is a practical application even on the street. They afford perfect aerodynamic efficacy and lever protection in the event of unintentional contact. The kit includes 1 x M6x40 UNI5931 screw. Weight: 184 g. Rizoma part number LP010B. Note: The mounting of the protector requires the use of adapters. See listing for RIZOMA PROGUARD MOUNTING ADAPTOR - LP310B

Rizoma fluid reservoir adapters provide the most appropriate mounting solution when replacing an OEM reservoir with a Rizoma one.

Technical Info

• The kit includes mounting plate and fixings required for assembly.
• Not compatible with fluid reservoirs CT015, CT017, CT115.
• Mounting Instructions

Rizoma Spy-R Bar End Mirror 57mm Black - BS185B

The Spy-R is a low profile bar end mirror that can mounted at any orientation. Above, below, in front of or behind the handlebar. In addition to superb adjustability and styling, the Spy-R Mirrors feature a convex, antiglare lens that ensures a wide and clear field of view. 

Features:

• Billet aluminium construction
  
• Convex, antiglare glass
  
• Biposition design
  
• Ample angle and position adjustment
• Sold individually as a single black 57mm mirror - if you need a mirror for both the right and left sides, add a quantity of 2 to your cart. If you require the mirror in a different size or color, please contact us.
  
• Note: A Rizoma end mirror mount/Proguard Adapter is required for installation and must be purchased separately. If only one mirror will be installed, Rizoma recommends that the Rizoma Single Bar End for Finishing, available separately, be installed on the opposite side to maintain visual symmetry. To determine which mirror mount is required to fit on your bike, please contact us or visit the Rizoma website to enter your year, make and model of bike: http://www.rizoma.com/universal/mirrors/spy-r-bs185-bs285-bs294/en
  

RIZOMA SPY ARM MIRROR 80MM BLACK - BS303B

• Convex and Antiglare Glass
  
• Machined from billet aluminum
  
• 3D machining
  
• Usable with 22mm (7/8) and 25.4 mm (1 Inch) handlebars
  
• Available in black - for other colors please contact us
  
• Sold individualy
• Note: Rizoma Spy Arm Mirrors may require adapters to fit your bike. Please contact us or visit the Rizoma website to determine the adapters required for your year, make and model of bike: http://www.rizoma.com/universal/mirrors/spyarm/en
  

The small and reduced handlebar end mirror can be mounted above or below the handlebars. The angle of the mirror arm can be individually selected.

Our glassless mirror series mo.view is unique in the world. The special feature of our mirrors is the patented mirror surface, which is worked directly from the metal of the body. The aluminum itself is the mirror surface.

The mirror body itself becomes very thin and light, creating a weightless design with no rim or frame. The convex mirror surface is manufactured by flycutting using diamond tools on ultra-precision machines in Berlin. It is then made resistant to oxidation, corrosion and abrasion by a complex plasma coating in a vacuum.

The mirror body, mirror arm and the clamp for the handlebar end are milled from solid aluminum on CNC-machined from solid aluminium and anodized to a high quality. All screws are made of stainless steel. The precise ball joint enables the
convenient and very stable adjustment of the mirror. Glass breakage or glass falling out is simply not possible.

The handlebar end mirror can be mounted above or below the handlebar. The small arm can be swiveled. The mirror is suitable for the right and left side. Mounting is directly on the handlebar end (22 mm and 1 inch) or if the grips and fittings can not be moved, using the mo.view bar adapter.

Cleaning: Use a mild cleaning agent and a microfiber cloth to remove
dirt, dust and other residues from the surface of the mirrors.
remove. Avoid abrasive cleaning agents that could damage the surface.
surface.

Technical Data:

• Mirror body diameter: 75 mm
• Thickness of the mirror body without ball head: 4 mm
• Length of the mirror arm: 61 mm
• Clamp diameter: can be used for 22 mm and 1 inch handlebars
• Clamp width: 8 mm
• Weight: 86 g

What's Included?

• 1x mo.view spy mirror (without ECE marking) with arm
• 1x clamp
• QR code for mounting and operating instructions

The handlebar end mirror with swivel mirror arm and defined detent angles is perfect for narrow passages or space problems in the garage. The mirror can be mounted above or below the handlebar.

Our glassless mirror series mo.view is unique in the world. The special feature of our mirrors is the patented mirror surface, which is worked directly from the metal of the body. The aluminum itself is the mirror surface.

The mirror body itself becomes very thin and light, creating a weightless design with no rim or frame. The convex mirror surface is manufactured by flycutting using diamond tools on ultra-precision machines in Berlin. It is then made resistant to oxidation, corrosion and abrasion by a complex plasma coating in a vacuum.

The mirror body, mirror arm and the clamp for the handlebar end are milled from solid aluminum and CNC-machined from solid aluminium and anodized to a high quality. All
screws are made of stainless steel. The precise ball joint allows the mirror to be adjusted comfortably and very stably. Glass breakage or glass falling out is simply not possible.

As a special feature, the mirrors of the flip series have a pivoting mirror arm with defined detent angles at 45° intervals. This allows the mirror to be tilted upwards if required without changing the setting of the mirror.

For narrow passages, space problems in the garage or for transportation
extremely practical. The locking mechanism is very stable and cannot be adjusted accidentally. The mirror does not vibrate even at high speeds when fitted correctly.

The mirror can be mounted either above or below the handlebars and is suitable
suitable for the right and left side. It is mounted directly on the handlebar end (22 mm and 1 inch) or, if the grips and fittings cannot be moved, using a mo.view bar adapter.

Technical Data:

• Mirror body diameter: 75 mm
• Thickness of the mirror body without ball head: 4 mm
• Length of the mirror arm: 61 mm
• Clamp diameter: can be used for 22 mm and 1 inch handlebars
• Clamp width: 12 mm
• Weight: 110 g

What's Included?

• 1x mo.view spy flip mirror with arm
• 1x clamp
• QR code for mounting and operating instructions

bar adapter uni disc/cone

Please note: one package contains 2 adapters.

The bar adapter uni disc/cone allows the mounting of all mo.view handlebar end mirrors in combination with the mo.blaze handlebar end indicators without moving the grips and controls on the handlebars. It creates a clamping surface for the handlebar end mirror outside the steering tube and at the same time allows the mounting of the handlebar end indicators. Whether for the mo.view blade, mo.view spy, mo.view flight, mo.view cafe, mo.view road, mo.view pace, mo.view cruise or mo.view street.

It is CNC machined from billet aluminum and black anodized. The clamping in the handlebar end is done by tightening an M6 screw inside the adapter, whereby the clamping pieces are widened and a stable assembly becomes possible. Then the mirror clamp on the adapter is tightened and the handlebar end indicator is clamped at the same time.

The bar adapter uni disc/cone comes with two clamps for the left and right side of the handlebar. They fit perfectly to our grips mo.grip as well as the push buttons mo.switch basic and mo.switch mini.

They are mounted directly in the handlebar end (22 mm, 7/8 and 1 inch) with a free inside diameter of 12 to 21 mm and a length of 90 mm.

Each specific mirror adapter is specially made for the corresponding motorcycle model to ensure the best possible fit on the handlebar, combining practicality and comfort without compromising the minimalist visual impact.

To determine whether this part will fit your bike, please visit the Rizoma site and select your make and model and year of bike: https://www.rizoma.com/en/bs819.html?moto=12331

Each specific mirror adapter is specially made for the corresponding motorcycle model to ensure the best possible fit on the handlebar. To ensure continuity of design, the lathed steel adapter matches the lines of the mirror, combining practicality and comfort without compromising on looks.

• The Kit includes: Stud M10x1.25/M6
• To be used with Rizoma One mirror
• Sold each

To determine whether this part will fit your bike, please visit the Rizoma site and select your make and model and year of bike: https://www.rizoma.com/en/bs814.html?moto=12331

Each specific mirror adapter is specially made for the corresponding motorcycle model to ensure the best possible fit on the handlebar. To ensure continuity of design, the lathed steel adapter matches the lines of the mirror, combining practicality and comfort without compromising on looks.

The Kit includes: Stud M10x1.25/M10x1.25 + Stud M10x1.25/M10x1.25-SX + Stud M10x1.25/M10 + Stud M10x1.25/M8 + Stud M10x1.25/M8SX and washers required for assembly.

To determine whether this part will fit your bike, please visit the Rizoma site and select your make and model and year of bike: https://www.rizoma.com/en/bs_adapt_direct.html?moto=12331

Each specific mirror adapter is specially made for the corresponding motorcycle model to ensure the best possible fit on the handlebar, combining practicality and comfort without compromising the minimalist visual impact.

The Kit includes: Screws M6x60, M5x55, M5x40 and washer.

To determine whether this part will fit your bike, please visit the Rizoma site and select your make and model and year of bike: https://www.rizoma.com/en/bs814.html?moto=12331

Simple items but ones with a significant visual impact, these anodized aluminum bar-end plugs offer outstanding color and design. Rizoma provides unique styling, ensuring every detail makes an impact. Rizoma bar-end plugs are also supplied with different adapters to fit original handlebars or other types.

WEIGHT (ea.): 0.034 kg
Compatible with handlebars with an internal diameter of 13 - 18 mm and M6 thread.
The Kit includes: Screws M6x30 - M6x60.

To determine whether this part will fit your bike, please visit the Rizoma site and select your make and model and year of bike: https://www.rizoma.com/en/bs819.html?moto=12331

MC PART ID: MRR005

Rizoma LP310B Adapter for Rizoma Bar End Mirror / Proguard Lever Guard - '13-'15 Triumph Speed Triple/R 1050, '07-'12 Street Triple

•  Each adaptor should be used for one side only; therefore if you want to install on both the right and left, you should add 2 adaptors (quantity 2) to the cart

As well as the Triumph Twin range can also be fitted to any motorcycle tank - check out the images for a diagram with measurements.

MC PART ID: MTE080 

The carriers are model-specific and do only fit the motorcycle listed on the manual. Thanks to the construction made of German quality steel, Hepco & Becker luggage racks guarantee maximum strength and a very high level of safety. Thanks to the high-quality coating and with proper care, the look is retained in the long term. If necessary, soft luggage can also be lashed down without any problems. The carrier offers many possibilities for this. If there is not enough space, the carrier can be combined with the Hepco & Becker universal rack extension.

• Recommended load: 5kg (Please note the model-specific information as well as the motorcycle manufacturer-specific information. Heavy luggage should generally be transported on the rear, but in the side cases or the tank bag.
• Can usually be combined with side case carriers or C-Bow holders without any problems (note the installation instructions and model-specific information)
• Scope of delivery: luggage rack + mounting material + instructions
• Only suitable for models with a universal plate when mounting the top case.

SKU 6547558 01 01

Motone Quality :

• Built from 16mm Diameter Grade 304 Stainless Steel Tubing with 1.25mm Wall Thickness
• Investment Cast Brackets
• Smooth Welds
• Powder Coat Black Finish

High Quality Pannier Rails with Investment Cast brackets in type 304 Stainless Steel - BLACK

Suitable for:

• Triumph Bonneville Bobber
• Triumph Bonneville Bobber Black
• Triumph Bonneville Speedmaster 1200

You may wish to combine with the Kriega DUO-28 Saddlebags to give you storage and turn your daily rider into a touring machine.

MC PART ID: MCB004

Motone Quality:

• Built from 16mm Diameter Grade 304 Stainless Steel Tubing with 1.25mm Wall Thickness
• Investment Cast Brackets
• Smooth Welds
• Black Powder Coat 

High Quality Pannier Rails with Investment Cast brackets in type 304 Stainless Steel - Black Powder Coat

Suitable for:

• Triumph T100 2017 and up
• Triumph T120 2016 and up
• Triumph Street Twin 2016 and up
• Triumph Street Scrambler 2017  and all further years and up (though obviously LHS only if high pipes)
• Triumph Street Cup  and all further years and up

Recommend combining with the Kriega DUO-28 Saddlebags to give you storage and turn your daily rider into a touring machine.

MC PART ID: MCB002

Motone Quality:

• Built from 16mm Diameter Grade 304 Stainless Steel Tubing with 1.25mm Wall Thickness
• Investment Cast Brackets
• Smooth Welds
• Mirror Polished Finish
  

High Quality Pannier Rails with Investment Cast brackets in type 304 Stainless Steel - Mirror Polished Finish

Suitable for:

• Triumph T100 2017 and up
• Triumph T120 2016 and up
• Triumph Street Twin 2016 and up
• Triumph Street Scrambler 2017  and all further years and up (though obviously LHS only if high pipes)
• Triumph Street Cup  and all further years and up

Recommend combining with the Kriega DUO-28 Saddlebags to give you storage and turn your daily rider into a touring machine.

MC PART ID: MCB001

Provides an alternative mounting location for the front straps on an OS-BASE KTM 790/890 & HUSQVARNA NORDEN 901 when the rear footrests are removed. 

FEATURES

• Ultra durable CNC machined Nylon-6

• High impact resistance

• Uses standard fitting hardware

 WEIGHT
85g / 3oz per pair

PRODUCT CODE
KOSFEKH