MOTOGADGET MO.VIEW BAR ADAPTER UNI DISC/CONE - BLACK

The universal rubber grip for handlebars with 1 inch or 22 mm (7/8 inch) tube diameter.

The mo.grip soft is a universal rubber grip for handlebars with a 1 inch or 22 mm (7/8 inch) tube diameter with an attractive look.

Its dimensions and grip profile are just as characteristic as the mo.grip aluminum grip.

Like the aluminum grip, it fits perfectly with the mo.blaze disc or mo.blaze cone handlebar end blinker and, together with the mo.switch mini, creates an extremely harmonious handlebar design.

Technical Data:

• Inner diameter (22mm): left 22 mm / right 24.5 mm (throttle grip)
• Inner diameter (1 inch): left 25.4 mm / right 27.5 mm (throttle grip)
• Outer diameter: 35 mm
• Width: 123 mm

What's Included?

1 pair of rubber grips mo.grip soft

mo.blaze disc by Motogadget – a turn signal for handlebar end installation in a trend-setting design.

The mo.blaze disc is the latest generation of turn signal lights. The characteristic feature of the LED turn signal is the transparent light-emitting disc on a compact aluminium base providing the harmonious finish of the handlebar end.

This is already the third generation of our turn signals using the motogadget TranzLight-Technology® (TLT, patent pending). This progressive approach to development is not limited to the miniaturization of turn signal casings. Furthermore, it creates new lighting concepts directly through a crystal-like plastic body. Only the precision of CAD calculations and state-of-the-art manufacturing processes allow this new design and its performance opportunities.

The luminous flux required for the TranzLight technology is generated by the intensiLED® procedure developed by Motogadget. It consists of three important pillars:

Specifically selected, high output LED with maximum efficiency and 7W total output and a service life of more than 50,000 hours.

IC controlled constant power source with 330 kHz pulses.

Special collimator optics, that precisely bundles the emission light from the LED into the plastic body.

The subtle aluminium casing is used for the secure mount of the plastic body only and includes the electronic control system and high-end LEDs. Traditionally, the casing is machined using CNC technology, available with an anodized black or mirror polish surface and furnished with an elegant finish of laser inscriptions.

The turn signal for handlebar end installation has a very low construction height and, due to the transparent disc, the mo.blaze shows up with a very neutral and subtle look. That's why the mo.blaze is the perfect match to many styles and all types of motorbikes.

Like any other conventional LED turn signal, the turn signal kit can be operated with load resistors or any of our load independent flasher relays (mo.flash, mo.wave, mo.stop, mo.relay+).

The mo.blaze disc has E mark and front turn signal approval.

The price is per EACH turn signal. Always make sure to order a complete set consisting of the left and right side turn signal assembly.

The mo.blaze tens1 from motogadget is one of the smallest turn signals for front and rear in the world.

Its tiny dimensions and reduced design make it almost disappear on the vehicle. As soon as it lights up, it is extremely bright thanks to IntensiLED® Technology and definitely can no longer be overlooked.

At the same time, the additional lateral beam angle ensures the best visibility and safety.

The turn signal has ECE approval as a front and rear direction blinker. The aluminum housing is CNC machined and available in black anodized or mirror polished finish.

The turn signal can be operated like any usual LED flasher with load resistors or all our load-independent flasher relays (mo.flash, mo.wave, mo.stop, mo.relay+).

Benefits

• extremely small aluminum housing
• ECE approval, no registration or similar necessary
• increased visibility and safety due to additional lateral beam angle
• highest luminosity by most modern high power LED technology (IntensiLED®)
• electronic voltage processing by 330kHz clocked, IC controlled constant current source and safe electronic protection
• the mounting thread is standard M8. Therefore no mounting adapter or special heat sink nut necessary

Technical Data

• Total length with thread: 29 mm
• Length without mounting thread: 11 mm
• Largest diameter: 11 mm
• Cable length: approx. 110 cm
• Weight incl. cable: approx. 20 g
• Fastening: M8 thread
• Voltage: 12V
• Power consumption: approx. 1 watt
• Service life: 50000h
• Waterproof - IP69
• Vibration resistant

Included

• single turn signal mo.blaze tens1 with thread M8
• nut M8
• 2 push-lock cable connectors
• installation instructions

This sale is for EACH turn signal. Please order two turn signals for use as a pair, or four turn signals for front and rear.

PLEASE NOTE! you order two adapters (one pair, left and right side).

The mo.blaze BMW R9T adapter allows the installation of our turn signals including the mo.blaze pin on BMW R9T

The shape of the adapter fits exactly to the original BMW R9T bike mount and is fixed with a stainless steel screw. The turn signals are simply pushed into the hole of the adapter with the threaded piece and fixed with a grub screw. The adapters are CNC machined from aluminium and black anodized. They fit both front and rear.

With the adapters, all indicators on all motorcycles maintain the legally required minimum distances.

Please note: one package contains 2 adapters.

The bar adapt. BMW M12 disc allows the mounting of all mo.view handlebar end mirrors on BMW handlebars with M12 thread, in combination with the mo.blaze handlebar end indicators, without moving the grips and controls on the handlebars.
It creates a clamping surface for the handlebar end mirror outside the steering tube. Whether for the mo.view blade, mo.view spy, mo.view flight, mo.view cafe, mo.view road, mo.view pace, mo.view cruise or mo.view street.

It is CNC machined from billet aluminum and black anodized.
The installation in the handlebar end is done by screwing the M12 thread into the handlebar. Then the handlebar end mirror is clamped on the adapter. This also clamps the handlebar end indicator in the adapter.

The bar adapt. BMW M12 disc comes with two thread pieces for the left and right side of the handlebar. They fit perfectly to our grips mo.grip.

The mounting is done directly in the thread M12 of the BMW handlebar.