KELLERMANN ATTO LED INDICATOR/SIGNAL LIGHT - BLACK

Note: this sale is for ONE (1) signal light. If you intend on installing two signal lights at the front or rear (one on the right and one on the left of your bike), add a quantity of TWO (2) to your shopping cart. Similarly, if you intend on replacing all four OEM signal lights on your bike, add a quantity of FOUR (4) to your shopping cart.

Sensation

With the Atto®/Atto® Dark we made the almost impossible possible: This indicator is extremely small and spectacularly bright at the same time. Compact and illuminating power: With this combination the Atto®/Atto® Dark is a real sensation!

This is our most compact indicator ever. For comparison: The light surface of the Atto®/Atto® Dark would fit four times on a 1 Cent coin! This consequent reduction offers completely new styling options for the motorcycle. In fact, the Atto®/Atto® Dark basically disappears on the motorcycle. This indicator will only grab your attention when it really has to!

The Atto®/Atto® Dark flashes with the intensity that has made the products of Kellermann legendary and the company over and over again a trendsetter in this segment. This indicator offers maximum illuminating power at minimal size, in short: sensationally small, spectacularly bright! We advise not to look for too long into the beam of this little power house.

The optimized light channeling is managed through a smart system of lenses and reflectors. This combination is possible thanks to the use of the well known Kellermann HighPower LED technology**, along with the new EXtranz® - Extreme Optical Transparency technology.

The complete electronics of the Atto®/Atto® Dark are in the casing, this indicator can be plugged into the 12 volt net directly.*

* Possibly electronic equipment is needed to regulate the flashing rate.
** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.

ECE-tested for front and rear

• sensationally small, spectacularly bright
• EXtranz® - Extreme Optical Transparency Technology
• Kellermann HighPower LED Technology
• Longlife Protection Guard®, IC operated, 330 kHz
• High quality metal housing
• Suitable for 12 volt DC applications
• With M5x0.5x6.5 fastening screw
• Measure: Length 14mm, max. diameter 10mm, glass diameter 7.8mm
• European design protection

Note: this sale is for ONE (1) signal light. If you intend on installing two signal lights at the  rear (one on the right and one on the left of your bike), add a quantity of TWO (2) to your shopping cart.

A sensational all-rounder

A 3in1 sensation as it hasn’t been seen before: The Atto® DF is the latest and by far most spectacular member of Kellermann’s successful Atto® series! The probably world’s smallest street legal indicator is now available in triple function with an integrated rear and brake light. Behind the extremely small yet sensationally bright Atto® DF lays a multifunctional all-rounder: At the rear it is visually almost completely disguised with a light surface, which would fit four times on a 1 Cent coin! In result the rear of the motorcycle can be designed as clean and individual as never before. However, in action the Atto® DF shines with an intensity which has made Kellermann products legendary – it’s not the size but the illumination power that counts. Indicators, rear and brake light warn with an uncompromising intensity, clearly signalling the following traffic to keep its distance. Kellermann’s well-known HighPower LED technology** and EXtranz® - Extreme Optical Transparency Technology manage an optimized light channelling through a smart system of lenses and reflectors and thus enabling this combination of sensational brilliance and minimal size. The Atto® DF can be combined with various other series e.g. Atto® or Bullet 1000®. As the complete electronics are in the casing the Atto® DF allows for a significant reduction in weight.

^{* Possibly electronic equipment is needed to regulate the flashing rate.
** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.}

ECE-tested for rear

• replaces the existing rear / brake light as well as indicators
• sensational new rear look
• EXtranz® - Extreme Optical Transparency Technology
• Kellermann HighPower LED Technology
• Longlife Protection Guard®, IC operated, 330 kHz
• High quality metal housing
• Suitable for 12 volt DC applications
• With M5x0.5x6.5 fastening screw
• European design protection

Atto® mounting plate C - Evo, black

33 mm, fitting on most models of different brands, e.g. Aprilia, BMW, Ducati, Moto Guzzi, Honda, Triumph

Sold as a pair of mounting plates.

Variable mounting adaptor M6, black

This adaptor offers a clean and easy solution for various mounting options and thus replaces an otherwise complex custom-made construction.

It consists of two parts: A clamping sheet and a shank nut with an M6 internal thread. The clamping sheet, which can be shifted and rotated on the shank nut, is compatible with any M5 threaded lamp (Atto®, micro S, Rhombus S) at every angle.

Due to the variances of this mounting the lamp can be installed in perfect alignment with the direction of traffic and is locked in place with grub screws. For example underneath the instruments  (see pictures).

Simply replace the shaft nut of the brake or clutch lever by this shank nut.
As on the pictures attached, the clamping sheet can also be installed together with the handlebar mirror.

Sold per piece. If you'd like to install on both sides (front left and front right), add a quantity of two (2) to your cart.

Note: this sale is for ONE (1) signal light. If you intend on installing two signal lights at the front or rear (one on the right and one on the left of your bike), add a quantity of TWO (2) to your shopping cart. Similarly, if you intend on replacing all four OEM signal lights on your bike, add a quantity of FOUR (4) to your shopping cart.

Classic meets Hightech

The Bullet 1000 was created with a clear goal: An indicator with the classic bullet look and a classy Kellermann design, but equipped with modern LED technology. A newly developed light technology (Kellermann-HPT) creates a homogenous ring of light. Design quality is not only a question of shape and surfaces but also a result of the complete look and feel when the lights are on. The high quality metal housing with a maximum diameter of 39 mm is like a jewel on the motorcycle. It is available in chrome, black and matte chrome. The Bullet 1000 works with any sophisticated bike design.

The Bullet 1000® comes in four different technical versions: Extreme indicator (Bullet 1000 Extreme), Dark indicator (Bullet 1000 Dark), indicator with yellow position light (Bullet 1000 PL), indicator with white position light (Bullet 1000 PL White) and indicator with rear and brake light (Bullet 1000 DF).

Bullet 1000 Dark

The Bullet 1000 Dark is a pure indicator similar to the Bullet 1000 Extreme, with high luminosity and has the ECE-R6 approval for all vehicles. The main difference between the Extreme and Dark versions is that the Extreme has a clear lens, whereas the Dark version has a tinted lens for a more stealthy look. The big advantage of the indicator is that you can install it closer to the main light than normal indicators, giving you more options to customize your bike. The continuous light ring shows the LED typical fast response** combined with Bullet typical soft response of the inner light section. Altogether a harmonic indicator performance that blends in with the great overall look and feel of this amazing product.*

^{* Electrical accessories may be required to match indicators signal frequency.
** Combination out of the IC operated Longlife Protection Guard system with high-performance-LEDs latest type of construction.}

ECE-tested for front and rear

Applicable on all vehicles (e. g. motorcycles, quads, cars, Super Seven, trailers, etc.)

• Special flashing effect
• Unique and homogeneous light ring
• Extreme light power
• HPT - Homogenous Projection Technology
• Kellermann HighPower LED Technology
• Longlife Protection Guard, IC operated, 330 kHz
• High quality metal housing
• Suitable for 12 volt DC applications
• With M8 x 20 fastening screw
• European design protection

Properties

Article number:

184.100