GOLDTOP '76 CAFE RACER JACKET (CE ARMOURED) - WAXED BROWN
Regular price
3.513,00 kr
Save -3.513,00 kr
Goldtop England's '76 Cafe Racer leather motorcycle jacket is quite simply, a timeless piece of café racer riding apparel! Based upon the original Goldtop 1976 Scuftuf design, this jacket now comes hand-waxed, brown aniline cowhide, with brown suede trim throughout, and Stainless Steel buckles & poppers. This jacket has comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for an optional back protector.
Available in sizes 38" to 52", and as these are hand-waxed jackets, the colour may vary slightly from jacket to jacket! Note: sizes 50 and 52 are special order and as such carry an additional $100 charge already included in the price shown as compared to standard sizes.
PRODUCT INFO
CE "AAA" Approved Protective Garment to EN 17092:2020
CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separatelyhere.
Optional Knox Micro-lock Compact back protector can be purchasedhere
Quilted panels on both the shoulders and elbows
Industrial grade hand-polished centre zip with AERO pull
Trademark Goldtop gold quilted lining
2 Zipped external pockets and
2 Interior chest pockets
Adjustable cuffs with ball zips
Stainless Steel adjustable waist buckles and collar snap
Suede leather trim inside collar, cuffs and zip guard
Dropped back
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
The SEESOFT™ CE-Level 2 back protector insert is designed to absorb variable impacts without compromising on comfort, ventilation or freedom of movement. The highly impact-resistant blend of Nitrille and Polynorbornene rubber results in a memory foam that is multi-impact rated and CE certified to the highest level (EN 1621-2:2003 - level 2).
In the case of severe angular impact, the individual Memory foam layers will shift relative to one another, resulting in impact dispersion over a larger effective surface area, and therefore minimizing the energy that is transmitted to the spine and back. By applying a multiple-layer concept, REV’IT! has developed a flexible back protector insert that performs consistently in all conditions.
Use the chart below to determine which size back protector you need for your jacket.
Size 03 - Compatible Jackets:
Textile jackets size XS
Ladies' textile jackets sizes 34-36
Ladies' leather jackets sizes 34-44
Men's leather jackets sizes 46-48
Size 04 - Compatible Jackets:
Textile jackets sizes S-M
Ladies' textile jackets sizes 38-44
Ladies' leather jackets sizes 46-48
Men's leather jackets sizes 50-54
Size 05 - Compatible Jackets:
Textile jackets sizes L-XXL
Ladies' textile jackets sizes 46-48
Men's leather jackets sizes 56-58
Size 06 - Compatible Jackets:
Textile jackets size 3XL (XYL) - 6XL
Men's leather jackets sizes 60-62
REV'IT! SEESOFT AIR BACK PROTECTOR
Regular price
377,00 kr
Save -377,00 kr
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Extra-ventilated, CE-level 2 back protector for additional rider protection.
The SEESOFT Air is our extra ventilated CE-level 2 back protector insert that is designed to absorb variable impacts without compromising comfort, ventilation, or freedom of movement. By increasing the number and the frequency ventilation holes (there are more holes and they are bigger!) in the back protector insert, body heat and evaporated perspiration can easily escape, helping the rider cool down quicker or to keep things dry when riding in higher temperatures.
The highly impact-resistant blend of Nitrile and Polynorbornene rubber results in a memory foam that is multi-impact rated and CE certified to the highest level. In the case of severe angular impact, the individual memory foam layers will shift relative to one another, resulting in impact dispersion over a larger effective surface area, and therefore minimizing the energy that is transmitted to the spine and back. By applying a multiple-layer concept, REV’IT! has developed a flexible back protector insert that performs consistently in all conditions.
Use the chart below to determine which size back protector you need for your jacket.
Size 03 - Compatible Jackets:
Textile jackets size XS
Ladies' textile jackets sizes 34-36
Ladies' leather jackets sizes 34-44
Men's leather jackets sizes 46-48
Size 04 - Compatible Jackets:
Textile jackets sizes S-M
Ladies' textile jackets sizes 38-44
Ladies' leather jackets sizes 46-48
Men's leather jackets sizes 50-54
Size 05 - Compatible Jackets:
Textile jackets sizes L-XXL
Ladies' textile jackets sizes 46-48
Men's leather jackets sizes 56-58
Size 06 - Compatible Jackets:
Textile jackets size 3XL (XYL) - 6XL
Men's leather jackets sizes 60-62
Gift Card
Regular price
125,44 kr
Save -125,44 kr
Shopping for someone else but not sure what to give them? Give them the gift of choice with a Strath Moto gift card.
Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees. You can redeem them online by entering the code received at checkout. Alternatively, they can also be redeemed in-store - just present your gift card to us at time of purchase. Easy peasy.
REV'IT! SEESMART HIP PROTECTOR RV33
Regular price
136,00 kr
Save -136,00 kr
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
Internal protectors have been the one limiting aspect that is constant across all motorcycling segments.
The SEESMART™ concept changes everything. SEESMART™ with outer shell technologies has increasingly enabled REV'IT to create stylish yet abrasion resistant riding gear. Specifically developed for use in motorcycle gear, SEESMART™ offers the highest level of flexibility while passing the EN1621-1:2012 CE-Level 1 impact tests, also in hot (T+) conditions. This product is delivered as a set of 2 protectors (left and right).
FUEL RODEO GLOVES BROWN
Regular price
753,00 kr
Save -753,00 kr
Slide your hands into a pair of Fuel’s Rodeo gloves. The Rodeo brown gloves are made from 100% cowhide leather and are double-stitched for extra strength. Protect your most important assets!
TECHNICAL SPECIFICATIONS
▪ Certificate CE - EN13594:2015 Level 2 KP ▪ 100% cowhide construction for excellent abrasion resistance. ▪ Integrated PVC knuckle armor for protection against crashes. ▪ Anatomically-contoured suede palm panels for abrasion resistance. ▪ Warm antibacterial & soft polyester microfiber lining. ▪ Stitched accordion baffles on index & middle fingers for added flexibility. ▪ Adjustable wrist opening with embossed leather closure and elastic gathers.
REV'IT! CALIBER GLOVES
Regular price
703,00 kr
Save -703,00 kr
NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.
The Caliber gloves (as part of the DIRT Series collection) feel perfectly at home on or off-road. Why? Because this snug-fitting pair of hand protectors combine the best of both leather and mesh. In order to keep your hands safe, these CE-certified gloves incorporate PWR|Shield fabric at the palm for maximum abrasion resistance. The top of the gloves are constructed with well-ventilated PWR|Stretch mesh and flexible TPR protection is found on the fingers and knuckles. This combination – along with stretch in all the right places - provides optimal freedom of movement and the armor necessary to keep your hands safe whether riding on the asphalt or exploring off the beaten path. Additionally, the comfortable neoprene cuff will keep dust and water out of the gloves.
Adjustability
Stretch at fingers
Stretch at thumb
Stretch fabric on back of hand
Closure
Hook-and-loop closure
Wrist strap
Lining
Tri-fleece liner:This polyester tricot fabric is used for glove lining, and brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp.
Features
Connect Finger Tip: Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
Grip patch at palm: A grip patch is made with a texturized pattern to deliver a superb grip performance.
Outside stitching: The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.
Pull tab: Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
Regular cuff
Ventilation: Ventilation holes
Protection
Injected ventilated flex knuckle: This knuckle protection is injected in the upper material which makes it very flexible and abrasion resistant. Due to its structure it ventilates very well while keeping you safe.
Outseam stitching by Guterman: Marketing calls it PWR yarn
PWR|Shield at palm: PWR|Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance levels. This product is equipped with PWR|Shield at the palm.
Temperfoam® knuckle
Temperfoam® palm slider
Temperfoam® thumb knuckle
TPR finger knuckles
Outer shell material
Connect finger tip fabric: Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
Corduroy
Goatskin: Tanned leather made from goatskin is considered extremely durable, and is often used for gloves and other products that require a soft hide.
Neoprene: Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
PWR|Stretch mesh
Certification
These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating. For more details about certification click here.