REV'IT! SAND 4

REV'IT! SAND 4 GLOVES - BLACK - SIZE S, 3XL - SALE!

$159.99 $109.99 Speichern $50.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

Although the Sand 4 gloves have been designed to create a perfect match with the Sand 4 H2O outfit, these gloves are bound to become the go-to gloves for a large audience of adventure riders across the globe. This pair of hand protection has been specifically designed and engineered for summer use, providing optimal grip, breathability, and ventilation. To make sure your hands stay cool and dry during hot summer rides, the gloves are constructed of strong and abrasion-resistant mesh stretch fabrics combined with a high-tech TPR knuckle protector that is designed to direct the airflow into the glove and onto the hands of the rider. Multiple perforation holes on the outside and inside increase the breathability even more. For additional protection, we added TPR protectors on the fingers and thumbs; providing a high level of protection without compromising comfort or flexibility. A TPR palm slider ensures a controlled slide in case of an unfortunate mishap. The gloves can easily be put on thanks to the handy pull tab on the cuff and then secured with the hook-and-loop wrist strap. Adjusting your route during your journey is a breeze thanks to the integrated Connect Finger Tip which makes it possible to control your touchscreen device while leaving your gloves on. Enjoy the summer breeze with the Sand 4 gloves.

Features

Connect Finger Tip
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.

Grip panel at palm
This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.

Outside stitching
The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.

Pull tab
Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone

Regular cuff

REV'IT! SAND 4 GLOVES - BLACK - SIZE S, 3XL - SALE!

REV'IT! SAND 4 H20 LADIES JACKET - SIZE 38, 46 - SALE!

$699.99 $484.99 Speichern $215.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

For many years, the Sand outfit has been the go-to choice for female riders looking for a rugged and versatile jacket and pants combination that is fully prepared to take on any challenging adventure on or off-road. Hot, wet, or cold weather will not stop you from reaching your destination, wherever the road may lead you. The Sand 4 H2O Ladies is the ultimate women’s adventure riding jacket. The tough yet lightweight, abrasion-resistant outer shell is engineered to last a multitude of around-the-world trips and is designed to provide excellent freedom of movement for the most demanding and technical riding situations. For maximum impact protection, the Sand 4 H2O Ladies includes our award-winning, industry-leading SEEFLEX™ CE-level 2 protectors at the shoulders and elbows. It also comes prepared for the optional and equally impressive SEESOFT™ CE-level 2 insert back protector. You’re ready to tackle any challenge with this jacket. When we say the Sand 4 H2O Ladies jacket is versatile, we mean that it is prepared for any climate you might encounter, and that it allows you to configurate it in the best possible way to ensure maximum comfort. Every layer is removable and separately wearable, from the waterproof hydratex® membrane to the insulated winter lining. Changing seasons or weather conditions won’t deter you from getting on your bike, you’re ready for it all. Multiple adjustment straps and tabs on the arms, and variable height adjustment straps at the waist will ensure the perfect fit to your body with or without the liners installed. If you are looking for airflow, this jacket has plenty of options that allow you to regulate the amount of wind that blows towards your body. The main front zipper can be zipped open to reveal a mesh ventilation panel that enables cool air to travel into the jacket. At the front, we have 2 ventilation panels which can be held open by a special tab connected to a press button on the outside of the jacket. With all 3 front ventilation panels open, in combination with the 2 rear-vent zippers, they will create an incredible amount of airflow through the entire jacket. Combined with the multiple ventilation zippers running across the arms, this jacket will keep you cool and comfortable in higher temperatures. The 2 front pockets, big rear pocket and 2 inner pockets provide ample storage space so you can bring all your essentials along for the ride, and keep them close. The back pocket is even large enough to store the liners when not in use. All the outside pockets can be closed with zippers to make sure you will not lose your valuable possessions during the ride. Durable, versatile and practical. The highest specifications regarding tear, cut and abrasion resistance and top-notch impact armor. The Sand 4 H2O Ladies jacket has it all and is ready for your next ride around the world.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

REV'IT! SAND 4 H2O LADIES JACKET SIZE CHART

REV'IT! SAND 4 H20 LADIES JACKET - SIZE 38, 46 - SALE!

REV'IT! SAND 4 LADIES GLOVES-BLACK - SIZE L, XL - SALE!

$159.99 $109.99 Speichern $50.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Description

Although the Sand 4 Ladies gloves have been designed to create a perfect match with the Sand 4 H2O Ladies outfit, these gloves are bound to become the go-to gloves for a large audience of female adventure riders across the globe. These are not just smaller versions of the men’s model, but have been specifically designed using our female-specific fit glove pattern. These gloves have been specifically designed and engineered for summer use, providing optimal grip, breathability, and ventilation. To make sure your hands stay cool and dry during hot summer rides, the gloves are constructed of strong and abrasion-resistant mesh stretch fabrics combined with a high-tech TPR knuckle protector that is designed to direct the airflow into the glove and onto the hands of the rider. Multiple perforation holes on the outside and inside increase the breathability even more. For additional protection, we added TPR protectors on the fingers and thumbs; providing a high level of protection without compromising on comfort or flexibility. A TPR palm slider ensures a controlled slide in case of an unfortunate mishap. The gloves can easily be put on thanks to the handy pull tab on the cuff and then secured with the hook-and-loop wrist strap. Adjusting your route during your journey is a breeze thanks to the integrated Connect Finger Tip which makes it possible to control your touchscreen device while leaving your gloves on. Enjoy the summer breeze with the Sand 4 Ladies gloves.

Features

Connect Finger Tip
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.

Grip panel at palm
This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.

Outside stitching
The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.

Pull tab
Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone

Regular cuff

REV'IT! SAND 4 LADIES GLOVES-BLACK - SIZE L, XL - SALE!

REV'IT! ECLIPSE 2 LADIES JACKET - AUBERGINE

$269.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Mesh textile summer jacket for urban riding

Summers seem to last longer in the city. Hotter days and warmer nights demand a riding essential – a lightweight jacket that cools you down. But the Eclipse 2 Ladies jacket doesn’t only optimize airflow. Beneath strategically placed polyester mesh panels, there’s SEESMART armor with CE-rated protection that you can rely on. Plus, plenty of practical touches for your daily trips around town like the zipped pockets, a wind catcher behind the front zipper, and a jeans loop. Beat the rush Winding your way to work in the rush hour, you’ll appreciate the breathable mesh panels at the front, the back, and the inner arms that send a current of air around your entire body. An abrasion-resistant 600-denier polyester construction adds a sense of secure comfort. You can quickly customize the fit of the Eclipse 2 with adjustable tabs at the waist, cuffs, and biceps – just loosen them off for a form-fitting amplified airflow, and a looser, cooler feel. Range-topping protection Eclipse 2 now Eclipse has evolved – now there’s SEESMART CE-Level 1 armor at the elbows and shoulders. Up your level of protection even higher with the SEESOFT CE-Level 2 back protector – inconspicuous yet highly effective impact resistance armor. Our protection has got your back without restricting your movement on every trip and around town.

COMFORT FEATURES

Adjustability:
Adjustment tab at cuffs

Adjustment tab at upper arm

Adjustment tab at waist
Pockets:
Inner pocket

Two slit pockets on front
Lining:
Mesh
Features:
Jeans loop

V-flap at cuff

CLIMATE FEATURES

Insulation:
Wind catcher behind front zipper

PROTECTION FEATURES

Protection:
Prepared for SEESOFT™ CE-level 2 Insert Back Protector

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
Polyester 600D

Polyester mesh
Visibility:
Laminated reflective logo on back

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

REV'IT! ECLIPSE 2 LADIES JACKET - AUBERGINE

REV'IT! BERLIN H20 LADIES PANTS

$399.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Multi-season, softshell pants with hydratex waterproof liner.

Riding around the city, come rain or shine your pants have a clear purpose – to make every journey as comfortable as possible. To do that across the seasons, they need to be versatile. So, Berlin H2O Ladies pants are constructed from a three-layer softshell with both breathable and thermal properties – the go-to textile for multi-season riding. Plus, the extra-long zipper’s easy-entry system means these pants are on or off in just a couple of zips. Waterproof warmth The 100% waterproof hydratex G-liner coating is applied to the inner lining, so your legs shrug off rain even in downpours. Plus, the access zipper that runs the length of the pants also has a wind and water catcher behind it. Even if the weather is whipping into you at speed or you’re navigating significant surface water; you stay dry, warm, and comfy. Be safe, be seen From the casual commuter to the serious tourer, you’re sure to encounter a variety of road conditions. When your trip really puts you to the test, SEESMART CE-Level 1 knee protection and hip armor is there to reassure you. Eye-catching reflective details on the ankle adjustment straps help you stand out among urban glare as well as the open road at night.

COMFORT FEATURES

Adjustability:
Adjustable knee protection

Adjustment tab at ankle

Adjustment tab at waist
Pockets:
Slit pockets on hip
Features:
Over pants

YKK Aquaguard® easy entrance, two-way zipper

YKK Aquaguard® easy entrance zipper

CLIMATE FEATURES

Waterproofing:
hydratex®|Mesh G-liner
Insulation:
Wind & water catcher behind entrance zipper

PROTECTION FEATURES

Protection:
Prepared for SEESMART RV33 CE-level 1 Insert Hip Protectors

SEESMART CE-level 1 Knee Protectors
Outer shell material:
Softshell 3L
Visibility:
Laminated reflection at ankles

REV'IT! CONTINENT WB GLOVE - BLACK

$87.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight, water-repellent, wet weather-specific, adventure riding glove

Provides great grip/feel on the handlebars
TPR soft knuckle

Lightweight glove for Off Road Adventure riding

Developed to offer maximum dexterity, grip, and handlebar feel in wet weather

conditions the Continent WB gloves join our DIRT Series collection. We know adventure never stops and we believe that neither should you. The Continent WB gloves are engineered with microfiber E-touch material that raises the bar on handlebar feel and feedback when you’re facing rain. To further assure riding comfort and ward off fatigue, the Continent WB gloves are built to be as light as possible.

Confident and fully in control
The soft and flexible TPR knuckle protector, the PWR|Shield material along the palm, and a memory foam pad enveloping your thumb will have you feeling secure. It’s abrasion-resistant outer fabrics are designed to be both highly flexible and water repellent. Thanks to the high-tech design of the Continent WB gloves, you’ll remain confident and fully in control.

COMFORT FEATURES

Adjustability:
Adjustment tab at cuff

Stretch fabric on back of hand
Closure:
Hook-and-loop closure
Lining:
Tricot liner
Features:
Connect Finger Tip

REV'IT! AIRWAVE 4 PANTS - ANTHRACITE

$329.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Ventilated, warm-weather, adventure sport pants

PRODUCT DESCRIPTION

We understand the importance of staying cool hot rides. Not only does your mind stay sharper behind the handlebars, but fatigue doesn’t set in as quickly, and you can thoroughly enjoy being out on the road. That’s why we created the Airwave 4, a pair of adventure sport pants - the perfect complement to the Airwave 4 jacket - that lets you effortlessly feel the breeze against your body. Ventilation is the name of the game If the name didn’t give it away, the Airwave 4 pants are all about, you guessed it, air. Specifically directing it to the legs when taking on your next adventure. The combination of PWR|Shell mesh, ripstop, and stretch, with full ventilation down the front of the legs, and round three-quarters around back, it means you’re getting airflow to on your lower half to the nth degree. Safety first A longstanding favorite in the collection, the Airwave 4 is a fan favorite within the ventilated pants category and has a Class AA CE certification. It also includes SEESMART hip and adjustable knee protection. Laminated reflection can also be found at the knees, so riders are more visible in low-light situations.

COMFORT FEATURES

Adjustability:
Adjustable knee protection

Adjustment strap at waist

Adjustment tab at ankle
Pockets:
Two slit pockets on upper legs
Lining:
Mesh
Features:
B-lock button closure at front

grip panel at seat

Grip panel at seat

Short connection zipper

CLIMATE FEATURES

Ventilation:
Fully ventilated mesh

PROTECTION FEATURES

Protection:
3D mesh protector pockets

SEESMART CE-level 1 Hip Protectors

SEESMART CE-level 1 Knee Protectors
Outer shell material:
Polyester ripstop

Polyester stretch

PWR|Shell mesh
Visibility:
Laminated reflection at knee

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating

REV'IT! TORNADO 4 PANTS - BLACK

$489.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Multi-season, multi-layered, ventilated touring pants

PRODUCT DESCRIPTION

Multi-season functionality lies at the heart of the Tornado 4 H2O pants: a perfect complement to the Tornado 4 H2O jacket. A tried and tested staple in our lineup, it offers the essentials tour riders are looking for when hitting the road: ventilation, waterproofing, and a high level of protection, wrapped into a smart and adventure-ready design. Customized for your rides Did the temperatures heat up from the time you started your ride? No problem, drop the detachable thermal and waterproof liner and let the fully ventilated mesh leg and back of leg panels allow the air flow directly toward your body. Is it cold or did it start to rain? That happens! Reattach the thermal and 2L hydratex waterproof liner for a more comfortable ride. Functionality in all its forms Laminated reflection at the calves and upper legs allows you to be better seen when riding in lower light conditions, the incorporated grip panel at the seat helps to prevent you from unnecessarily sliding around when things get slippery, and the aforementioned mesh and ripstop materialization equate to the Tornado 4 H2O pants’ CE AA certification class.

COMFORT FEATURES

Adjustability:
Adjustment strap at calves

Adjustment strap at waist

Adjustment tab at ankle
Pockets:
Slit pockets on hip
Lining:
Mesh

Soft spacer mesh
Features:
B-lock button closure at front

grip panel at seat

Grip panel at seat

Short connection zipper

Stretch at knees

CLIMATE FEATURES

Waterproofing:
Detachable hydratex|Lite liner
Insulation:
Detachable thermal liner
Ventilation:
Fully ventilated mesh

PROTECTION FEATURES

Protection:
SEEFLEX CE-level 2 Knee Protectors

SEESMART CE-level 1 Hip Protectors

Soft spacer mesh protector pockets
Outer shell material:
Polyester mesh

Polyester ripstop

Polyester stretch
Visibility:
Laminated reflection at calves

Laminated reflection on upper legs

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating

REV'IT! TORNADO 4 H20 LADIES JACKET - SILVER-BLACK

$549.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Multi-season, multi-layered, ventilated women’s touring jacket

PRODUCT DESCRIPTION

Multi-season functionality lies at the heart of the Tornado 4 H2O Ladies jacket. A tried and tested staple in our lineup, it offers the essentials female tour riders are looking for when hitting the road: ventilation, waterproofing, and a high level of protection, wrapped into a smart and adventure-ready design. Customized for your rides Did the temperatures heat up from the time you started your ride? No problem, drop the detachable thermal and waterproof liner and let the fully ventilated 3D air mesh chest, arms, and back panels allow the air flow directly toward your body. Is it cold or did it start to rain? That happens! Reattach the thermal liner and choose whether you want to wear your durable yet easily packable 3L hydratex waterproof liner on the outside or inside of your jacket. Functionality in all its forms Reflection at the chest, shoulders, and back help you be seen when riding in lower light conditions, the sturdy hanger loop allows you to conveniently hang your jacket up at night to dry or to air out, and the overall strong materialization of the aforementioned 3D air mesh, Hypalon®, and ripstop equate to the Tornado 4 H2O Ladies jacket CE AA certification class.

COMFORT FEATURES

Adjustability:
Adjustable elbow protection

Adjustment strap at lower arm

Adjustment strap at waist

Adjustment tab at cuffs

Adjustment tab at upper arm

Flexisnap at collar
Pockets:
Two inner pockets

Two slit pockets on front

Waterproof inner pocket within waterproof liner
Lining:
Mesh

Soft spacer mesh
Features:
3L hydratex over jacket

Cuff zipper

External hang loop

Prepared for vest connector NEON

Short connection zipper

Two-way Collar Snap Closure System

CLIMATE FEATURES

Waterproofing:
Detachable hydratex|3L liner
Insulation:
Detachable thermal liner
Ventilation:
Fully ventilated 3D air mesh

Fully ventilated mesh

PROTECTION FEATURES

Protection:
Prepared for SEESOFT CE-level 2 Insert Back Protector

SEEFLEX CE-level 2 Elbow Protectors

SEEFLEX CE-level 2 Shoulder Protectors

Soft spacer mesh protector pockets
Outer shell material:
3D air mesh

Hypalon pull tab at cuff

Polyester mesh

Polyester ripstop
Visibility:
Laminated reflection at chest

Laminated reflection at upper arms

Laminated reflection on back

Laminated reflective logo on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

REV'IT! TORNADO 4 H20 LADIES JACKET - SILVER-BLACK

REV'IT! SAND 4 GLOVES - GREY-BLACK - SIZE S

$159.99 $109.99 Speichern $50.00

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight, comfortable, ventilated adventure riding gloves

Ventilated / Keeps you cool
Ready for adventure
Provides great grip/feel on the handlebar

Description

Although the Sand 4 gloves have been designed to create a perfect match with the Sand 4 H2O outfit, these gloves are bound to become the go-to gloves for a large audience of adventure riders across the globe. This pair of hand protection has been specifically designed and engineered for summer use, providing optimal grip, breathability, and ventilation. To make sure your hands stay cool and dry during hot summer rides, the gloves are constructed of strong and abrasion-resistant mesh stretch fabrics combined with a high-tech TPR knuckle protector that is designed to direct the airflow into the glove and onto the hands of the rider. Multiple perforation holes on the outside and inside increase the breathability even more. For additional protection, we added TPR protectors on the fingers and thumbs; providing a high level of protection without compromising comfort or flexibility. A TPR palm slider ensures a controlled slide in case of an unfortunate mishap. The gloves can easily be put on thanks to the handy pull tab on the cuff and then secured with the hook-and-loop wrist strap. Adjusting your route during your journey is a breeze thanks to the integrated Connect Finger Tip which makes it possible to control your touchscreen device while leaving your gloves on. Enjoy the summer breeze with the Sand 4 gloves.

Features

Connect Finger Tip
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.

Grip panel at palm
This part at the inside of the knees gives you extra grip for ultimate control in the corners. It also protects the leather from wear and tear.

Outside stitching
The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.

Pull tab
Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone

Regular cuff

REV'IT! SAND 4 GLOVES - GREY-BLACK - SIZE S

REV'IT! ECLIPSE 2 LADIES JACKET - SAND

$269.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Mesh textile summer jacket for urban riding

Summers seem to last longer in the city. Hotter days and warmer nights demand a riding essential – a lightweight jacket that cools you down. But the Eclipse 2 Ladies jacket doesn’t only optimize airflow. Beneath strategically placed polyester mesh panels, there’s SEESMART armor with CE-rated protection that you can rely on. Plus, plenty of practical touches for your daily trips around town like the zipped pockets, a wind catcher behind the front zipper, and a jeans loop. Beat the rush Winding your way to work in the rush hour, you’ll appreciate the breathable mesh panels at the front, the back, and the inner arms that send a current of air around your entire body. An abrasion-resistant 600-denier polyester construction adds a sense of secure comfort. You can quickly customize the fit of the Eclipse 2 with adjustable tabs at the waist, cuffs, and biceps – just loosen them off for a form-fitting amplified airflow, and a looser, cooler feel. Range-topping protection Eclipse 2 now Eclipse has evolved – now there’s SEESMART CE-Level 1 armor at the elbows and shoulders. Up your level of protection even higher with the SEESOFT CE-Level 2 back protector – inconspicuous yet highly effective impact resistance armor. Our protection has got your back without restricting your movement on every trip and around town.

COMFORT FEATURES

Adjustability:
Adjustment tab at cuffs

Adjustment tab at upper arm

Adjustment tab at waist
Pockets:
Inner pocket

Two slit pockets on front
Lining:
Mesh
Features:
Jeans loop

V-flap at cuff

CLIMATE FEATURES

Insulation:
Wind catcher behind front zipper

PROTECTION FEATURES

Protection:
Prepared for SEESOFT™ CE-level 2 Insert Back Protector

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
Polyester 600D

Polyester mesh
Visibility:
Laminated reflective logo on back

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

REV'IT! CAVERN LADIES GLOVES - SAND-BLACK

$104.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Highly ventilated, short-cuffed, female-specific gloves for two-wheeled travelers.

For the days when the warm wind is blowing and you need comfortable and ventilating hand protection, the Cavern Ladies gloves are ready to go on that adventure with you. Ventilation at hand For the short-cuffed, female-specific Cavern Ladies Adventure Travel gloves, we use a combination of 3D air mesh along with microfiber, to let the air in but also to let your hands breathe with ease when on the handlebars. Perforation on the inside of the hand panels also supports the cooling efforts. And as an extra touch of flair, debossing is found on the inside of the hand. Soft yet safe Part of the appeal of having gloves with less rigid parts is comfort. But not at the expense of safety, of course. We use stretch between the fingers for added dexterity but also armor them. Memory foam thumb protection is included, along with a SEESOFT knuckle, middle and ring finger protection, and OrthoLite® Ultralite foam wrist and palm protection.

Comfort features

Adjustability:
Adjustment tab at cuff

Stretch at fingers

Stretch lips at fingers
Closure:
elastic at wrist

Hook-and-loop closure
Lining:
Tri-fleece liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Grip patch at thumb

Outseam stitching

Short cuff

Climate features

Ventilation:
Fully ventilated 3D air mesh

Ventilation holes

Protection features

Protection:
Memory foam at fingers

Memory foam at thumb

Memory foam underneath knuckle protector

OrthoLite® UltraLite comfort foam at palm

PWR|Shield at palm

SEESOFT 3D knuckle

TPR injected finger knuckle protectors
Outer shell material:
3D air mesh

microfiber e-touch

Ottoman stretch

PU (polyurethane) coated fabric

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! CAVERN LADIES GLOVES - SAND-BLACK

REV'IT! NEW HEIGHTS LADIES GLOVES - BLACK

$149.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Short-cuffed, comfort-focused, female-fit, perforated, full-leather gloves.

The blend of extreme comfort, superior ventilation, and top-notch protection ensures that the New Heights Ladies gloves can soar when you’re out enjoying life on two wheels in warm weather. Focus on comfort When you slip your hands into the New Heights Ladies gloves, you’ll notice right away that the comfort level is through the roof. It was designed that way, specifically for women’s hands. Created with Goat soft leather, fingers can effortlessly grip the handlebars and move around thanks to the flexible nature of the materialization. More ventilation The ventilation factor on the New Heights Ladies gloves is, as the name suggests, high! With a fully perforated back of the hand—except where the protectors are—and perforation at the tops and sides of fingers, along with perforation at the palm, hands can feel the breeze with ease when riding. The protective element Incorporated protection comes in the form of the new knuckle styling (a hard knuckle is coupled with the New Heights Ladies gloves), along with finger protectors, and a Temperfoam® palm slider laced with PWR|Shield.

Comfort features

Adjustability:
Adjustment tab at cuff

Stretch lips at fingers
Closure:
Hook-and-loop closure
Lining:
Tri-fleece liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Grip patch at thumb

Short cuff

Climate features

Ventilation:
Ventilation holes

Protection features

Protection:
Hard shell knuckle

PU finger knuckles

PWR|Shield at palm

Temperfoam® finger knuckles

Temperfoam® palm slider

Temperfoam® underneath knuckle protector
Outer shell material:
Drum-dyed stay soft goatskin leather

Karvin cowhide (PU coated)

Leather Connect Finger Tip

Ottoman stretch

Perforated, drum-dyed stay soft goatskin leather

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! NEW HEIGHTS LADIES GLOVES - BLACK

REV'IT! SAND 5 GLOVES - BLACK

$154.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Short-cuffed, ventilated travel gloves for adventurous riders

Although the Sand 5 gloves have been designed to complement the Sand 5 H2O outfit, these lightweight and breathable gloves have also become the go-to gloves for a large audience of adventure riders across the globe. The next step As with every evolution of a staple product in our collection, there are certain aspects that we like to zoom in on and improve yet leave other characteristics like functionality and purpose untouched. With the Sand 5 gloves, that was fit and comfort. As one of the top-selling gloves in our collection, we already knew we had a winning recipe. We just wanted to make it even better. A balanced recipe A short cuff along with a combination of leather and 3D air mesh make up the majority of the Sand 5 gloves’ composition. We then match it with top-tier features like a new TPR injected knuckle protector that allows for even more dexterity and flexibility, TPU thumb and palm protection, a TPR little finger protector, wrist bone protection, a tri-fleece lining (for added comfort), goat stay-soft leather and a grip panel on the inside of the hand, and much more. The Sand name has a legacy to uphold, and this generation does their predecessors proud.

Comfort features

Adjustability:
Adjustment tab at cuff

Stretch at fingers

Stretch at thumb

Stretch fabric on back of hand

Stretch lips at fingers
Closure:
elastic at wrist

Hook-and-loop closure
Lining:
Tri-fleece liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Grip patch at thumb

Pull tab

Short cuff

Climate features

Ventilation:
Fully ventilated 3D air mesh

Ventilation holes

Protection features

Protection:
PWR|Yarn

Temperfoam® at cuff

Temperfoam® underneath knuckle protector

Temperfoam® underneath protectors

TPR injected finger knuckle protectors

TPR injected knuckle

TPR little-finger knuckle

TPU hard shell palm slider

TPU hard shell thumb protector
Outer shell material:
3D air mesh

Drum-dyed stay soft goatskin leather

Hypalon

Inside out goat suede

Leather Connect Finger Tip

Ottoman stretch

PU grip

PU (polyurethane) coated fabric

PWR|4-way stretch

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! SAND 5 GLOVES - SAND-BLACK

$154.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Short-cuffed, ventilated travel gloves for adventurous riders

Although the Sand 5 gloves have been designed to complement the Sand 5 H2O outfit, these lightweight and breathable gloves have also become the go-to gloves for a large audience of adventure riders across the globe. The next step As with every evolution of a staple product in our collection, there are certain aspects that we like to zoom in on and improve yet leave other characteristics like functionality and purpose untouched. With the Sand 5 gloves, that was fit and comfort. As one of the top-selling gloves in our collection, we already knew we had a winning recipe. We just wanted to make it even better. A balanced recipe A short cuff along with a combination of leather and 3D air mesh make up the majority of the Sand 5 gloves’ composition. We then match it with top-tier features like a new TPR injected knuckle protector that allows for even more dexterity and flexibility, TPU thumb and palm protection, a TPR little finger protector, wrist bone protection, a tri-fleece lining (for added comfort), goat stay-soft leather and a grip panel on the inside of the hand, and much more. The Sand name has a legacy to uphold, and this generation does their predecessors proud.

Comfort features

Adjustability:
Adjustment tab at cuff

Stretch at fingers

Stretch at thumb

Stretch fabric on back of hand

Stretch lips at fingers
Closure:
elastic at wrist

Hook-and-loop closure
Lining:
Tri-fleece liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Grip patch at thumb

Pull tab

Short cuff

Climate features

Ventilation:
Fully ventilated 3D air mesh

Ventilation holes

Protection features

Protection:
PWR|Yarn

Temperfoam® at cuff

Temperfoam® underneath knuckle protector

Temperfoam® underneath protectors

TPR injected finger knuckle protectors

TPR injected knuckle

TPR little-finger knuckle

TPU hard shell palm slider

TPU hard shell thumb protector
Outer shell material:
3D air mesh

Drum-dyed stay soft goatskin leather

Hypalon

Inside out goat suede

Leather Connect Finger Tip

Ottoman stretch

PU grip

PU (polyurethane) coated fabric

PWR|4-way stretch

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! SAND 5 LADIES GLOVES - BLACK

$154.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Short-cuffed, female-specific, ventilated travel gloves for adventurous riders

Although the Sand 5 Ladies have been designed to complement the Sand 5 H2O Ladies outfit, these lightweight and breathable gloves have also become the go-to gloves for a large audience of female adventure riders across the globe. The next step As with every evolution of a staple product in our collection, there are certain aspects that we like to zoom in on and improve yet leave other characteristics like functionality and purpose untouched. With the Sand 5 Ladies gloves, that was fit and comfort. As one of the top-selling gloves in our collection, we already knew we had a winning formula. We just wanted to make it even better. A balanced recipe A short cuff along with a combination of leather and 3D air mesh make up the majority of the Sand 5 Ladies gloves’ composition. We then match it with top-tier features like a new TPR injected knuckle protector that allows for even more dexterity and flexibility, TPU thumb and palm protection, a TPR little finger protector, wrist bone protection, a tri-fleece lining (for added comfort), Goat stay-soft leather and a grip panel on the inside of the hand, and much more. The Sand name has a legacy to uphold, and this generation does their predecessors proud.

Comfort features

Adjustability:
Adjustment tab at cuff

Stretch at fingers

Stretch at thumb

Stretch fabric on back of hand

Stretch lips at fingers
Closure:
elastic at wrist

Hook-and-loop closure
Lining:
Tri-fleece liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Grip patch at thumb

Pull tab

Short cuff

Climate features

Ventilation:
Fully ventilated 3D air mesh

Ventilation holes

Protection features

Protection:
PWR|Yarn

Temperfoam® at cuff

Temperfoam® underneath knuckle protector

Temperfoam® underneath protectors

TPR injected finger knuckle protectors

TPR injected knuckle

TPR little-finger knuckle

TPU hard shell palm slider

TPU hard shell thumb protector
Outer shell material:
3D air mesh

Drum-dyed stay soft goatskin leather

Hypalon

Inside out goat suede

Leather Connect Finger Tip

Ottoman stretch

PU grip

PU (polyurethane) coated fabric

PWR|4-way stretch

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! SAND 5 H20 GLOVES - BLACK

$199.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Waterproof, mid-cuffed, travel-ready gloves for all your adventures.

The Sand 5 H2O are the go-to gloves for the rider that doesn’t let grey skies and the possibility of rain get in the way of their riding plans. A strong foundation These gloves have been engineered specifically for riding on or off road during unstable weather conditions in spring, summer, or fall. By incorporating a waterproof and breathable hydratex|Z-liner construction with comfort-enhancing McFit® technology, these features help hands to stay dry and have a good grip when it’s slippery out there. We also introduce the tri-fleece push-pull liner to the Sand 5 H2O gloves (a feature normally found on our GTX aka GORE-TEX gloves) giving them the extra comfort factor and a premium feel. The safety element Armoring hands comes in many forms with the Sand 5 H2O gloves. The most prominent ones being the hard knuckle along with the TPU thumb protector and palm slider. TPR finger knuckles, reinforcements at the palm, a combination of leather and textile, an even larger visor wiper than before made of suede, and thanks to the rugged pull tab on the cuff, slipping on these gloves is a breeze and you can secure them in place with the hook-and-loop closure followed by the hook-and-loop wrist strap.

Comfort features

Adjustability:
Adjustment strap at wrist

Adjustment tab at cuff

Stretch at cuff

Stretch at thumb

Stretch fabric on back of hand

Stretch lips at fingers
Closure:
Hook-and-loop closure

Wrist strap
Lining:
Push-Pull tri-fleece liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Grip patch at thumb

Outseam stitching

Pull tab

Regular cuff

Suede leather visor wiper

Climate features

Waterproofing:
hydratex|Z-liner with McFit® technology

Protection features

Protection:
PWR|Yarn

Temperfoam® at cuff

Temperfoam® underneath knuckle protector

Temperfoam® underneath protectors

TPR finger knuckles

TPR hard shell knuckle

TPR little-finger knuckle

TPU hard shell palm slider

TPU hard shell thumb protector
Outer shell material:
Drum-dyed stay soft goatskin leather

Hypalon

Inside out goat suede

Leather Connect Finger Tip

PU grip

PU (polyurethane) coated fabric

PWR|4-way stretch

PWR|Shell ripstop stretch
Visibility:
laminated reflection at cuff

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! VOLTIAC 3 LADIES JACKET - GREEN-ANTHRACITE

$399.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Multi-season jacket with thermal and waterproof liners.

Previous generations of this jacket redefined affordable, capable, all-weather touring apparel, and the Voltiac 3 H2O Ladies remains the same dependable companion. From the PWR|Ripstop fabric on the shoulder, elbow, and forearm areas to an outer shell construction in 600-denier polyester – every feature is made to last the distance. No excuses With the Voltiac 3 H2O Ladies, the weather won’t dictate when you ride – reasons not to get outside have dried up and melted away thanks to hydratex waterproof and cozy thermal liners. Whatever the season, two ventilation panels quickly unzip to optimize airflow. Plus, the ability to adjust the waist, cuffs, and upper arms ensure form-fitting performance that’s tailored to your body. Zero compromise It’s what’s inside our apparel that matters most to us – and that is you. When designing and developing an affordable, all-season range, we insisted on zero compromise, so you can expect the same high-spec protection and optional upgrades as with our top-of-the-range REV’IT! jackets – SEESMART CE-Level 1 protectors at the shoulders and elbows, plus an insert for an optional SEESOFT CE-Level 2 back protector.

Comfort features

Adjustability:
Adjustment drawcord at hem

Adjustment strap at waist

Adjustment tab at cuffs

Adjustment tab at upper arm
Pockets:
Inner pocket within thermal liner

Two hand warmer pockets

Two stash pockets at front
Features:
Short connection zipper

Soft edge at collar

Two-way Collar Snap Closure System

V-flap at cuff

Climate features

Waterproofing:
hydratex|Mesh G-liner
Insulation:
Detachable thermal liner
Ventilation:
Air outlet on upper back

Zippers on chest

Protection features

Protection:
Prepared for SEESOFT CE-level 2 Insert Back Protector

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
Polyester 600D

Polyester ripstop
Visibility:
Laminated reflection at chest

Laminated reflection at lower arms

Laminated reflection on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

REV'IT! VOLTIAC 3 LADIES JACKET - GREEN-ANTHRACITE

REV'IT! SAND 5 H20 JACKET - BLACK-ANTHRACITE

$779.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Multi-season, multi-purpose textile jacket for the adventure-hungry traveler.

The Sand series is an icon in the REV'IT! lineup, embodying a distinctive style that has, over the years, defined travel within the motorcycle industry. That legacy continues with the Sand 5 H2O jacket. The Evolution The latest iteration of the Sand series represents an evolution rather than a revolution. This change is marked by small tweaks and adjustments aimed at enhancing its overall performance. The Sand 5 jacket (as part of the Sand 5 outfit with matching pants) remains as relevant today as it was 15 years ago. In crafting the Sand 5, a delicate balance is struck, paying homage to the past while looking towards the future. Shifting Styles The Sand 5 H2O jacket takes on a slightly more sport-driven character compared to the Sand 4. As adventure bikes become more sport-centric and dynamic, the Sand 5 H2O reflects this industry shift. Matching the fast-paced nature of sport and the thirst for the uncharted, the Sand 5 H2O jacket fuses two genres into one. Furthermore, the jacket is hydration pack prepared in the lower back pocket (like with our Trail vest), with a cutout in the left corner to feed a water tube underneath the arm and up the front to be attached on the left side. The Over and Under Concept Like we previously introduced in one of our ADV jackets—the Offtrack 2 H2O—we’ve taken our know-how of the proven over and under waterproof liner concept and applied it to our Sand 5 H2O jacket. Wear the detachable hydratex 3L liner over or under your protective layer according to your personalized preference for keeping the rain away—and keeping you dry. Though we recommend wearing it over because of the high-performance characteristics of the membrane and its design-driven aesthetics. A detachable, separately wearable thermal liner is also included to up the ante on warmth and comfort on cold, rainy days.--

Comfort features

Adjustability:
Adjustable elbow protection

Adjustment drawcord at hem

Adjustment strap at lower arm

Adjustment tab at upper arm

Double adjustment strap at waist

Flexisnap at collar

Variable height adjustment straps at waist
Pockets:
Inner pocket within thermal liner

Slit pocket at back

Stash pocket at waist

Two external pockets at thermal liner

Two inner pockets

Waterproof inner pocket within waterproof liner
Lining:
Mesh

Soft spacer mesh
Features:
3L hydratex over jacket

Cuff zipper

External hang loop

Long connection zipper

Lower-back pocket prepared for 1.5L hydration pack

Prepared for REV’IT! Segur neck brace

Separately wearable thermal liner

Short connection zipper

Soft edge at collar

Two-way Collar Snap Closure System

Climate features

Waterproofing:
Detachable hydratex|3L liner
Insulation:
Detachable thermal liner
Ventilation:
Ventilation panels on back side

Ventilation panels on chest

XL zippers on sleeves

Protection features

Protection:
Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector

Prepared for SEESOFT CE-level 2 Insert Back Protector

SEEFLEX CE-level 2 Elbow Protectors

SEEFLEX CE-level 2 Shoulder Protectors
Outer shell material:
3D air mesh

High density polyester 600D

Polyester ripstop

Stretch mesh
Visibility:
Laminated reflection at chest

Laminated reflection at upper arms

Laminated reflection on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating

REV'IT! SAND 5 H20 JACKET - BLACK-ANTHRACITE

REV'IT! SAND 5 H20 LADIES JACKET - SILVER-ANTHRACITE

$779.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Multi-season, multi-purpose, female-specific textile jacket for the adventure-hungry traveler

The Sand Ladies series is an icon in the REV'IT! lineup, embodying a distinctive style that has, over the years, defined travel within the motorcycle industry. That legacy continues with the Sand 5 H2O Ladies jacket. The Evolution The latest iteration of the Sand series represents an evolution rather than a revolution. This change is marked by small tweaks and adjustments aimed at enhancing its overall performance. This Sand 5 H2O Ladies jacket (as part of the Sand 5 H2O Ladies outfit with matching pants) remains as relevant today as it was 25 years ago. In crafting the Sand 5, a delicate balance is struck, paying homage to the past while looking towards the future. Shifting Styles The Sand 5 H2O Ladies jacket takes on a slightly more sport-driven character compared to the Sand 4. As adventure bikes become more sport-centric and dynamic, the Sand 5 H2O Ladies reflects this industry shift. Matching the fast-paced nature of sport and the thirst for the uncharted, the Sand 5 H2O Ladies jacket fuses two genres into one. Furthermore, the jacket is hydrapak prepared in the lower back pocket (like with our Trail vest) with a cutout in the left corner to feed a water tube underneath the arm and up the front to be attached on the left side. The Over and Under Concept Like we previously introduced in one of our ADV jackets—the Offtrack 2 H2O—we’ve taken our know-how of the proven over and under waterproof liner concept and applied it to our Sand 5 H2O jacket. Wear the detachable hydratex 3L liner over or under your protective layer according to your personalized preference for keeping the rain away—and keeping you dry. Though we recommend wearing it over because of the high-performance characteristics of the membrane and its design-driven aesthetics. A detachable, separately wearable thermal liner is also included to up the ante on warmth and comfort on cold, rainy days. Female-Specific Details Special attention has been given to the fit of the Sand 5 H2O Ladies jacket to ensure that, even with all the inclusion of straps and buckles, the form and silhouette still look appealing from a design perspective. Additionally, the jacket is hydration pack prepared in the lower back pocket (similar to our Trail vest), with a cutout in the left corner to feed a water tube underneath the arm and up the front to be attached on the left side.

Comfort features

Adjustability:
Adjustable elbow protection

Adjustment drawcord at hem

Adjustment strap at lower arm

Adjustment tab at upper arm

Double adjustment strap at waist

Flexisnap at collar

Variable height adjustment straps at waist
Pockets:
Inner pocket within thermal liner

Slit pocket at back

Stash pocket at waist

Two external pockets at thermal liner

Two inner pockets

Waterproof inner pocket within waterproof liner
Lining:
Mesh

Soft spacer mesh
Features:
3L hydratex over jacket

Cuff zipper

External hang loop

Long connection zipper

Lower-back pocket prepared for 1.5L hydration pack

Prepared for REV’IT! Segur neck brace

Separately wearable thermal liner

Short connection zipper

Soft edge at collar

Two-way Collar Snap Closure System

Climate features

Waterproofing:
Detachable hydratex|3L liner
Insulation:
Detachable thermal liner
Ventilation:
Ventilation panels on back side

Ventilation panels on chest

XL zippers on sleeves

Protection features

Protection:
Prepared for SEESOFT CE-level 2 Insert Back Protector

SEEFLEX CE-level 2 Elbow Protectors

SEEFLEX CE-level 2 Shoulder Protectors
Outer shell material:
3D air mesh

High density polyester 600D

Polyester ripstop

Stretch mesh
Visibility:
Laminated reflection at chest

Laminated reflection at upper arms

Laminated reflection on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

REV'IT! SAND 5 H20 LADIES JACKET - SILVER-ANTHRACITE

REV'IT! SAND 5 H20 PANTS - BLACK

$579.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Multi-season, multi-purpose textile pants for the adventure-hungry traveler.

The Sand series is an icon in the REV'IT! lineup, embodying a distinctive style that has, over the years, defined travel within the motorcycle industry. That legacy continues with the Sand 5 H2O pants. Designed for the Future The Sand 5 H2O pants take on a slightly more speed-driven character compared to the outgoing Sand 4. As adventure bikes become more sportive and dynamic, the Sand 5 H2O pants reflect this industry shift. Through this new design, we were able to include drop-down ventilation panels on both front thighs and calf adjustable straps. Higher quality materials are also used to ensure the Sand 5 H2O pants carry you through whatever adventure you embark on. The Over and Under Concept We’ve taken our know-how of the proven over and under waterproof liner concept and applied it to our Sand 5 H2O pants. Wear the detachable liner over or under your protective, CE-certified layer according to your personalized preference for keeping the rain away—and keeping you dry. The waterproof liner, made of a resilient 3L hydratex material, has reinforcements at the seat and inside of the knees for long-term durability. Furthermore, to accommodate the over-under construction, the waistband of the main trousers—aka the protection layer—comes with a belt buckle and a stretch insert strategically positioned at the center front of the pant for improved comfort when sitting. The RWL (removable waterproof layer) is equipped with a snap with two-position adjustment. A detachable thermal liner is also included to up the ante on warmth and comfort on cold, rainy days.

Comfort features

Adjustability:
Adjustable knee protection

Adjustable waist belt

Adjustment strap at calves

Adjustment tab at ankle
Pockets:
Slit pockets on hip
Features:
3L hydratex over jacket

B-lock button closure at front

Calf zipper for easy entrance

grip panel at seat

Long connection zipper

Prepared for Strapper suspenders

Short connection zipper

Stretch at knees

Stretch at waist

Climate features

Waterproofing:
Detachable hydratex|3L liner
Insulation:
Detachable thermal liner
Ventilation:
Ventilation panels on upper legs

Protection features

Protection:
SEEFLEX CE-level 2 Knee Protectors

SEESMART CE-level 1 Hip Protectors

Soft spacer mesh protector pockets
Outer shell material:
3D air mesh

High density polyester 600D

Polyester ripstop

PWR|Shell stretch
Visibility:
Laminated reflection at ankles

Laminated reflection on upper legs

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! SAND 5 H20 LADIES PANTS - BLACK

$579.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Multi-season, multi-purpose, female-specific textile pants for the adventure-hungry traveler.

The Sand series is an icon in the REV'IT! lineup, embodying a distinctive style that has, over the years, defined travel within the motorcycle industry. That legacy continues with the Sand 5 H2O Ladies pants. Designed for the Future The Sand 5 H2O Ladies pants take on a slightly more speed-driven character compared to the outgoing Sand 4. As adventure bikes become more sportive and dynamic, the Sand 5 H2O Ladies pants reflect this industry shift. Through this new design, we were able to include drop-down ventilation panels on both front thighs, calf adjustable straps, as well as small mesh utility stash pockets—emphasis on small!—despite most of the thigh being dedicated to the mesh panels for ventilation. Higher quality materials are also used to ensure the Sand 5 H2O pants carry you through whatever adventure you embark on. The Over and Under Concept We’ve taken our know-how of the proven over and under waterproof liner concept and applied it to our Sand 5 H2O Ladies pants. Wear the detachable liner over or under your protective, CE certified layer according to your personalized preference for keeping the rain away—and keeping you dry. The waterproof liner, made of resilient 3L hydratex material, has reinforcements at the seat and inside of the knees for long-term durability. The waistband of the main trousers—aka the protection layer—comes with a belt buckle and a stretch insert strategically positioned at the center front of the pant for improved comfort when sitting. The RWL (removable waterproof layer) is equipped with a snap with two-position adjustment. A detachable thermal liner is also included to up the ante on warmth and comfort on cold, rainy days.

Comfort features

Adjustability:
Adjustable knee protection

Adjustable waist belt

Adjustment strap at calves

Adjustment tab at ankle
Pockets:
Slit pockets on hip
Features:
3L hydratex over jacket

B-lock button closure at front

Calf zipper for easy entrance

grip panel at seat

Long connection zipper

Prepared for Strapper suspenders

Short connection zipper

Stretch at knees

Stretch at waist

Climate features

Waterproofing:
Detachable hydratex|3L liner
Insulation:
Detachable thermal liner
Ventilation:
Ventilation panels on upper legs

Protection features

Protection:
SEEFLEX CE-level 2 Knee Protectors

SEESMART CE-level 1 Hip Protectors

Soft spacer mesh protector pockets
Outer shell material:
3D air mesh

High density polyester 600D

Polyester ripstop

PWR|Shell stretch
Visibility:
Laminated reflection at ankles

Laminated reflection on upper legs

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! SAND 5 H20 PANTS - SILVER-BLACK

$579.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Multi-season, multi-purpose textile pants for the adventure-hungry traveler.

The Sand series is an icon in the REV'IT! lineup, embodying a distinctive style that has, over the years, defined travel within the motorcycle industry. That legacy continues with the Sand 5 H2O pants. Designed for the Future The Sand 5 H2O pants take on a slightly more speed-driven character compared to the outgoing Sand 4. As adventure bikes become more sportive and dynamic, the Sand 5 H2O pants reflect this industry shift. Through this new design, we were able to include drop-down ventilation panels on both front thighs and calf adjustable straps. Higher quality materials are also used to ensure the Sand 5 H2O pants carry you through whatever adventure you embark on. The Over and Under Concept We’ve taken our know-how of the proven over and under waterproof liner concept and applied it to our Sand 5 H2O pants. Wear the detachable liner over or under your protective, CE-certified layer according to your personalized preference for keeping the rain away—and keeping you dry. The waterproof liner, made of a resilient 3L hydratex material, has reinforcements at the seat and inside of the knees for long-term durability. Furthermore, to accommodate the over-under construction, the waistband of the main trousers—aka the protection layer—comes with a belt buckle and a stretch insert strategically positioned at the center front of the pant for improved comfort when sitting. The RWL (removable waterproof layer) is equipped with a snap with two-position adjustment. A detachable thermal liner is also included to up the ante on warmth and comfort on cold, rainy days.

Comfort features

Adjustability:
Adjustable knee protection

Adjustable waist belt

Adjustment strap at calves

Adjustment tab at ankle
Pockets:
Slit pockets on hip
Features:
3L hydratex over jacket

B-lock button closure at front

Calf zipper for easy entrance

grip panel at seat

Long connection zipper

Prepared for Strapper suspenders

Short connection zipper

Stretch at knees

Stretch at waist

Climate features

Waterproofing:
Detachable hydratex|3L liner
Insulation:
Detachable thermal liner
Ventilation:
Ventilation panels on upper legs

Protection features

Protection:
SEEFLEX CE-level 2 Knee Protectors

SEESMART CE-level 1 Hip Protectors

Soft spacer mesh protector pockets
Outer shell material:
3D air mesh

High density polyester 600D

Polyester ripstop

PWR|Shell stretch
Visibility:
Laminated reflection at ankles

Laminated reflection on upper legs

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! OFFTRACK 3 H20 PANTS - BLACK

$579.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight and versatile textile all-season adventure pants

Product description

Adventure is about embracing the unknown, and to do that, versatility is key. Enter the third-generation Offtrack 3 H2O pants - true all-season all-rounders. Designed with a lightweight three-layer construction, they feature a technical outer shell, a detachable thermal layer, and waterproof hydratex rain pants with over-and-under functionality.

Tailored to your needs
Switch between the three layers and adjust your setup as needed. The durable softshell and ripstop outer shell, combined with ventilation panels at the thighs, provides built-in climate control - ensuring you stay cool when your ride heats up and comfortable in high-temperature adventures.

Safety assured
No matter how you layer up for your ride, you can rest assured that the Offtrack 3 H2O pants keep you protected. They come equipped with ventilated CE-level 2 SEEFLEX knee protection and thin yet flexible CE-level 1 SEESMART hip armor for optimal safety.

Comfortably in control
Wherever your adventure takes you, the Offtrack 3 H2O pants are designed to adapt. Featuring ample hook-and-loop adjustment, they provide the flexibility to be worn over boots without feeling bulky - while also allowing for a snug fit when tucked into off-road boots. Additional thoughtful design elements include a built-in buckled waistband adjustment - for maintained wearing comfort with the rain layer worn on top - and both short and long connection zippers to attach the pants securely to your jacket - keeping you comfortably in control.

Comfort features

Adjustability:
Adjustable waist belt
Features:
Belt loops

Long connection zipper

Over-under wearable hydratex|Lite waterproof liner

Short connection zipper

Climate features

Waterproofing:
Detachable hydratex|Lite 2-in-1 liner

Protection features

Protection:
SEESMART CE-level 1 Hip Protectors
Visibility:
Laminated reflection at calves

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! OFFTRACK 3 H20 PANTS - SILVER-BLACK

$579.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight and versatile textile all-season adventure pants

Product description

Adventure is about embracing the unknown, and to do that, versatility is key. Enter the third-generation Offtrack 3 H2O pants - true all-season all-rounders. Designed with a lightweight three-layer construction, they feature a technical outer shell, a detachable thermal layer, and waterproof hydratex rain pants with over-and-under functionality.

Tailored to your needs
Switch between the three layers and adjust your setup as needed. The durable softshell and ripstop outer shell, combined with ventilation panels at the thighs, provides built-in climate control - ensuring you stay cool when your ride heats up and comfortable in high-temperature adventures.

Safety assured
No matter how you layer up for your ride, you can rest assured that the Offtrack 3 H2O pants keep you protected. They come equipped with ventilated CE-level 2 SEEFLEX knee protection and thin yet flexible CE-level 1 SEESMART hip armor for optimal safety.

Comfortably in control
Wherever your adventure takes you, the Offtrack 3 H2O pants are designed to adapt. Featuring ample hook-and-loop adjustment, they provide the flexibility to be worn over boots without feeling bulky - while also allowing for a snug fit when tucked into off-road boots. Additional thoughtful design elements include a built-in buckled waistband adjustment - for maintained wearing comfort with the rain layer worn on top - and both short and long connection zippers to attach the pants securely to your jacket - keeping you comfortably in control.

Comfort features

Adjustability:
Adjustable waist belt
Features:
Belt loops

Long connection zipper

Over-under wearable hydratex|Lite waterproof liner

Short connection zipper

Climate features

Waterproofing:
Detachable hydratex|Lite 2-in-1 liner

Protection features

Protection:
SEESMART CE-level 1 Hip Protectors
Visibility:
Laminated reflection at calves

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! OFFTRACK 3 H20 PANTS - SILVER-BLACK

REV'IT! OUTBACK 5 H20 PANTS - SILVER-BLACK

$479.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Mid-level, versatile, textile all-season adventure touring pants

Product description

Designed to make serious adventure touring accessible, the Outback textile outfit has been a staple in our lineup for years - ridden around the world since its inception. Sticking with a tried-and-tested three-layer construction - including detachable thermal insulation and over-and-under hydratex waterproofing - these fifth-generation Outback 5 H2O pants take performance to the next level with upgraded, diagonally cut drop-down ventilation.

Move freely and comfortably
Fit and adjustability are essential in any adventure-ready pants, and the Outback 5 H2O pants are no exception. Stretch material across the knees and two waist-adjustment buckles ensure a secure yet flexible fit, allowing for unrestricted movement on the bike.

Ready for adventure
As expected from gear built for adventures in all conditions, the Outback 5 H2O pants are equipped with top-tier CE-level 2 SEEFLEX knee protectors and thin yet effective CE-level 1 SEESMART hip protection. Additional safety measures include strategically placed reflective elements to enhance visibility in all lighting conditions - keeping you seen and secure on every ride.

Comfort features

Adjustability:
Adjustable waist belt
Pockets:
Slit pocket at hip
Features:
Belt loops

Short connection zipper

Climate features

Waterproofing:
Detachable hydratex|Lite 2-in-1 liner
Insulation:
Detachable thermal liner

Protection features

Protection:
SEEFLEX CE-level 2 Knee Protectors

SEESMART CE-level 1 Hip Protectors
Outer shell material:
High density polyester 600D

XL Polyester Ripstop 600D
Visibility:
Laminated reflection at calves

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! OUTBACK 5 H20 PANTS - SILVER-BLACK

REV'IT! OUTBACK 5 H20 LADIES PANTS - SILVER-BLACK

$479.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Mid-level, versatile, textile all-season adventure touring pants

Product description

Designed to make serious adventure touring accessible, the Outback textile outfit has been a staple in our lineup for years - ridden around the world since its inception. Sticking with a tried-and-tested three-layer construction - including detachable thermal insulation and over-and-under hydratex waterproofing - these fifth-generation Outback 5 H2O Ladies pants take performance to the next level with upgraded, diagonally cut drop-down ventilation.

Move freely and comfortably
Fit and adjustability are essential in any adventure-ready pants, and the Outback 5 H2O Ladies pants are no exception. Stretch material across the knees and two waist-adjustment buckles ensure a secure yet flexible fit, allowing for unrestricted movement on the bike.

Ready for adventure
As expected from gear built for adventures in all conditions, the Outback 5 H2O Ladies pants are equipped with top-tier CE-level 2 SEEFLEX knee protectors and thin yet effective CE-level 1 SEESMART hip protection. Additional safety measures include strategically placed reflective elements to enhance visibility in all lighting conditions - keeping you seen and secure on every ride.

Comfort features

Adjustability:
Adjustable waist belt
Pockets:
Slit pocket at hip
Features:
Belt loops

Short connection zipper

Climate features

Waterproofing:
Detachable hydratex|Lite 2-in-1 liner
Insulation:
Detachable thermal liner

Protection features

Protection:
SEEFLEX CE-level 2 Knee Protectors

SEESMART CE-level 1 Hip Protectors
Outer shell material:
High density polyester 600D

XL Polyester Ripstop 600D
Visibility:
Laminated reflection at calves

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! OUTBACK 5 H20 LADIES PANTS - SILVER-BLACK

REV'IT! CONVERGENT H20 LADIES PANTS - SILVER-BLACK

$399.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Entry-level, versatile, textile all-season adventure touring pants

Product description

Designed to make serious adventure touring accessible, the Outback textile outfit has been a staple in our lineup for years - ridden around the world since its inception. Sticking with a tried-and-tested three-layer construction - including detachable thermal insulation and over-and-under hydratex waterproofing - these fifth-generation Outback 5 H2O Ladies pants take performance to the next level with upgraded, diagonally cut drop-down ventilation.

Move freely and comfortably
Fit and adjustability are essential in any adventure-ready pants, and the Outback 5 H2O Ladies pants are no exception. Stretch material across the knees and two waist-adjustment buckles ensure a secure yet flexible fit, allowing for unrestricted movement on the bike.

Ready for adventure
As expected from gear built for adventures in all conditions, the Outback 5 H2O Ladies pants are equipped with top-tier CE-level 2 SEEFLEX knee protectors and thin yet effective CE-level 1 SEESMART hip protection. Additional safety measures include strategically placed reflective elements to enhance visibility in all lighting conditions - keeping you seen and secure on every ride.

Comfort features

Adjustability:
Adjustable waist belt
Pockets:
Slit pocket at hip
Features:
Belt loops

Short connection zipper

Climate features

Waterproofing:
Detachable hydratex|Lite 2-in-1 liner
Insulation:
Detachable thermal liner

Protection features

Protection:
SEEFLEX CE-level 2 Knee Protectors

SEESMART CE-level 1 Hip Protectors
Outer shell material:
High density polyester 600D

XL Polyester Ripstop 600D
Visibility:
Laminated reflection at calves

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! CONVERGENT H20 LADIES PANTS - SILVER-BLACK

REV'IT! ELLISON 2 LADIES LEGGINGS - BLACK

$339.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

High-waisted, flexible, and comfortable ride-ready leggings

Product description

With a high, body-hugging waistband and internal elastic, the Ellison 2 Ladies leggings ensure a secure fit that contours to the body. And when it comes to security, these are fully ride-ready leggings, boasting a class-AA safety rating and CE-level 1 SEESMART impact protection that’s so thin and flexible, you’ll barely notice it’s there.

Truly leggings
It speaks volumes that this second iteration of the Ellison Ladies is no longer called “legging-inspired pants.” We’ve upgraded them to the point where they truly deserve to be called the Ellison 2 Ladies leggings. With improved stretchability in the PWR|Interlock knit material, they provide durable comfort - further enhanced by stretch rib inserts above the knees.

Sleek and streamlined
To ensure you still get all the necessary functionality on the road, we’ve incorporated pockets - two up front, two at the back - and added two small, bartack-reinforced pull loops to make pulling the leggings up effortless and a stylish reflective element along the side seam to assure visibility. Even the connection zipper, which allows you to attach the Ellison 2 Ladies leggings to your jacket, is neatly covered with fabric when not in use, maintaining a sleek and streamlined appearance.

Comfort features

Adjustability:
Adjustable knee protection

Elastic at waistband
Pockets:
Two back pockets on back

Two pockets on front
Features:
Pull loops

Short connection zipper

Stretch lips at knees

Climate features

Protection features

Protection:
Safety seams

SEESMART CE-level 1 Hip Protectors

SEESMART CE-level 1 Knee Protectors
Outer shell material:
PWR|Knit Brushed
Visibility:
Reflection at hem

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! ELLISON 2 LADIES LEGGINGS - BLACK

REV'IT! TALIA LADIES LEGGINGS - BLACK-WHITE

$259.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

High-waisted, flexible, and comfortable ride-ready sport leggings

Product description

The Talia Ladies leggings combine the style of sportswear leggings with the inherently supportive, stretch-infused comfort of activewear - all while incorporating class-A motorcycling safety into their form-fitted silhouette. Bold, sporty graphics add a touch of athletic-inspired style.

Class and a tangible quality feel
With built-in pull loops, the Talia Ladies leggings are easy to slip on, and thanks to the high-rise body-hugging waistband, they stay securely in place - for both comfort and safety. The durable PWR|Interlock knit is soft against the skin and features a subtle shimmer, ensuring not only the all-day wearing comfort that only leggings can provide but also a refined look with a premium-quality feel.

Style and safety kept in check
More than just a fashion statement, the Talia Ladies leggings are designed first and foremost for riding. From the wear-resistant fabric and reflective elements to the barely noticeable CE-level 1 SEESMART protective armor at the knees, both style and safety are kept in check on every ride. For additional impact protection, simply upgrade with optional SEESMART hip protectors.

Comfort features

Adjustability:
Adjustable knee protection

Elastic at waistband

Climate features

Protection features

Protection:
Prepared for SEESMART RV33 CE-level 1 Insert Hip Protectors

Safety seams

SEESMART CE-level 1 Knee Protectors
Outer shell material:
PWR|Knit Brushed
Visibility:
Reflection at hem

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating.

REV'IT! TALIA LADIES LEGGINGS - BLACK-WHITE

REV'IT! CONVERGENT H20 GLOVES - BLACK

$139.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight and waterproof textile touring gloves

Product description

Designed to reflect simplicity, style, and sophistication - built to offer quality comfort. Featuring a fresh and clean aesthetic, a fully waterproof hydratex Z-liner construction, and a combination of a supple goatskin leather palm and durable polyester fabric, the Convergent H2O gloves provide high levels of comfort at an entry-level price point.

Modern style and versatility
Living up to their name, the Convergent H2O gloves are aimed at the point where modern style converges with waterproof mid-length cuff versatility. Whether on rainy summer days or while traversing mixed-weather, mid-season riding, the Convergent H2O gloves assure ample riding comfort without leaving you wanting for that ever-important handlebar feel - even with a liner as soft as the Convergent H2O gloves have.

Simple and secure
The strong yet incredibly flexible SEESOFT knuckle and OrthoLite® UltraLite impact foam along the palm provide quality feel without weighing you down, while clever features like our touchscreen-ready Connect Finger Tip fabrics and the simple and secure wrist adjustment make life easy - wherever your touring adventure takes you.

Comfort features

Adjustability:
Adjustment strap at wrist

Adjustment tab at cuff

Stretch lips at fingers
Closure:
Hook-and-loop closure

Wrist strap
Lining:
Soft brushed tricot liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Pre-curved fingers

Pull tab

Climate features

Waterproofing:
hydratex|Z-liner

Protection features

Protection:
Memory foam at fingers

OrthoLite® UltraLite comfort foam at palm

PWR|Shield at palm

SEESOFT 3D knuckle
Outer shell material:
goatskin drum dyed with WR finish

microfiber

Polyester

PWR| shell ripstop

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! CONVERGENT H20 GLOVES - SAND-BLACK

$139.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight and waterproof textile touring gloves

Product description

Designed to reflect simplicity, style, and sophistication - built to offer quality comfort. Featuring a fresh and clean aesthetic, a fully waterproof hydratex Z-liner construction, and a combination of a supple goatskin leather palm and durable polyester fabric, the Convergent H2O gloves provide high levels of comfort at an entry-level price point.

Modern style and versatility
Living up to their name, the Convergent H2O gloves are aimed at the point where modern style converges with waterproof mid-length cuff versatility. Whether on rainy summer days or while traversing mixed-weather, mid-season riding, the Convergent H2O gloves assure ample riding comfort without leaving you wanting for that ever-important handlebar feel - even with a liner as soft as the Convergent H2O gloves have.

Simple and secure
The strong yet incredibly flexible SEESOFT knuckle and OrthoLite® UltraLite impact foam along the palm provide quality feel without weighing you down, while clever features like our touchscreen-ready Connect Finger Tip fabrics and the simple and secure wrist adjustment make life easy - wherever your touring adventure takes you.

Comfort features

Adjustability:
Adjustment strap at wrist

Adjustment tab at cuff

Stretch lips at fingers
Closure:
Hook-and-loop closure

Wrist strap
Lining:
Soft brushed tricot liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Pre-curved fingers

Pull tab

Climate features

Waterproofing:
hydratex|Z-liner

Protection features

Protection:
Memory foam at fingers

OrthoLite® UltraLite comfort foam at palm

PWR|Shield at palm

SEESOFT 3D knuckle
Outer shell material:
goatskin drum dyed with WR finish

microfiber

Polyester

PWR| shell ripstop

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! CONVERGENT H20 GLOVES - SAND-BLACK

REV'IT! CONVERGENT H2O LADIES GLOVES - GREY-BLACK

$139.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight and waterproof women’s textile touring gloves

Product description

Designed to reflect simplicity and sophistication - built to offer quality comfort. Featuring a modern and clean aesthetic, a fully waterproof hydratex Z-liner construction, and a combination of supple goatskin leather and durable polyester fabric, the Convergent H2O Ladies gloves provide high levels of comfort at an entry-level price point.

Modern style and versatility
Living up to their name, the Convergent H2O Ladies gloves are aimed at the point where modern style converges with waterproof mid-length cuff versatility. Whether on rainy summer days or while traversing mixed-weather, mid-season riding, the Convergent H2O Ladies gloves assure ample riding comfort without leaving you wanting for that ever-important handlebar feel.

Simple and secure
The soft yet strong SEESOFT knuckle and OrthoLite® UltraLite impact foam along the palm provide quality feel without weighing you down, while clever features like our touchscreen-ready Connect Finger Tip fabrics and the simple and secure wrist adjustment make life easy - wherever your touring adventure takes you.

Comfort features

Adjustability:
Adjustment strap at wrist

Adjustment tab at cuff

Stretch lips at fingers
Closure:
Hook-and-loop closure

Wrist strap
Lining:
Soft brushed tricot liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Pre-curved fingers

Pull tab

Climate features

Waterproofing:
hydratex|Z-liner

Protection features

Protection:
Memory foam at fingers

OrthoLite® UltraLite comfort foam at palm

PWR|Shield at palm

SEESOFT 3D knuckle
Outer shell material:
goatskin drum dyed with WR finish

microfiber

Polyester

PWR| shell ripstop

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! CONVERGENT H2O LADIES GLOVES - GREY-BLACK

REV'IT! ARGON 3 GLOVES - BLACK-WHITE

$299.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Entry-level, track-ready leather gloves with hard-shell protection

Product description

Providing an accessible, track-ready leather glove with an above-entry-level spec sheet - that’s exactly what the Argon 3 gloves bring. Featuring confidence-inspiring reinforcements exactly where you need them and a combination of supple and durable premium goatskin and cowhide leathers, the Argon 3 gloves provide all the necessary handlebar feel and sport riding comfort.

Performance-focused style
Made to match perfectly with the Argon 3 series suits - and jackets - the gloves breathe the same performance-focused style. The strategically positioned ventilation, the pre-curved glove shape, and the supple SEESOFT-laden hard-shell knuckle guard ensure lasting dexterity and comfort.

Living up to their intent
At the same time, there’s double-layered leather where needed, high-quality seam stitching throughout, and a race-ready finger bridge across the ring and little finger to make sure the Argon 3 gloves live up to their intent in terms of usability and long-lasting durability. The addition of our Connect Finger Tip material - allowing you to use touchscreens - makes it a great sporty road-riding glove as well.

Comfort features

Adjustability:
Adjustment strap at wrist

Adjustment tab at cuff

Stretch lips at fingers

Stretch lips at thumb
Closure:
double cuff closure

Hook-and-loop closure

Wrist strap
Lining:
Tri-fleece liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Grip patch at thumb

Long cuff

Pre-curved fingers

Climate features

Ventilation:
Perforated leather

Ventilation holes

Protection features

Protection:
Little finger protection bridge

PWR|Yarn

Reinforced finger tips

SEESOFT underneath TPU hard-shell knuckle

Temperfoam® at cuff

Temperfoam® at little finger

Temperfoam® finger knuckles

Temperfoam® palm slider

Temperfoam® thumb knuckle

TPU cuff protector

TPU hard shell finger knuckles

TPU hard shell knuckle

TPU hard shell little finger protector

TPU hard-shell metacarp protector

TPU hard shell thumb protector
Outer shell material:
Artificial Leather

cowhide

Drum-dyed stay soft goatskin leather

Leather Connect Finger Tip

microfiber

Perforated artificial leather

Perforated, drum-dyed stay soft goatskin leather

PU grip

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! POSITRON GLOVES - BLACK-RED - SIZE XXL

$209.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Extremely ventilated and highly flexible leather summer gloves for urban sport riders

Product description

Next-level ventilation and high-tech performance appeal come together in our all-new Positron gloves. With a race-derived finger-bridge connection between the little finger and ring finger and a bionic, open-structured SEEFLEX knuckle, the Positron gloves provide unparalleled fit, feel, and ventilation.

Picking up the gauntlet
Offering a sporty leather glove that truly checks all the boxes for ventilation can be a challenge. With the Positron gloves, we’ve gone the extra mile to pick up that gauntlet. Featuring soft and supple perforated goatskin leather and a flexibly comfortable knitted cuff, the Positron glove design molds itself to your hands.

Innovative, sporty appeal
Aided by an all-new, sturdy yet malleable knuckle, these urban sport gloves maintain their flexible character while letting in more cool air than ever before. Based on our proprietary SEEFLEX protective armor, the SEEFLEX 3D Protection knuckle really kicks breathability up a gear. Strategically positioned hard-shell protection elements along the fingers and at the palm finish off the gloves’ overall sporty appeal.

Comfort features

Adjustability:
Adjustment strap at wrist

Stretch lips at fingers

Stretch lips at thumb
Closure:
Wrist strap
Lining:
Tricot liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip panel at palm

Grip patch at thumb

Knitted cuff

Pre-curved fingers

Pull tab

Climate features

Ventilation:
Perforated leather

Perforated textile

Ventilation holes

Protection features

Protection:
Injected ventilated flex knuckle

Little finger protection bridge

SEEFLEX knuckle

Temperfoam® finger knuckles

Temperfoam® thumb knuckle

TPU hard shell finger knuckles

TPU hard-shell metacarp protector

TPU hard shell thumb protector

Ventilated dual comp protector
Outer shell material:
3D air mesh

Artificial Leather

Connect finger tip fabric

Drum-dyed stay soft goatskin leather

microfiber

microfiber e-touch

Perforated, drum-dyed stay soft goatskin leather

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! POSITRON GLOVES - BLACK-RED - SIZE XXL

REV'IT! AIRWAVE 4 LADIES PANTS - BLACK

$329.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

We understand the importance of staying cool hot rides. Not only does your mind stay sharper behind the handlebars, but fatigue doesn’t set in as quickly, and you can thoroughly enjoy being out on the road. That’s why we created the Airwave 4 Ladies, a pair of adventure sport pants - the perfect complement to the Airwave 4 Ladies jacket - that lets you effortlessly feel the breeze against your body.

Ventilation is the name of the game
If the name didn’t give it away, the Airwave 4 Ladies pants are all about, you guessed it, air. Specifically directing it to the legs when taking on your next adventure. The combination of a female-specific fit, PWR|Shell mesh, ripstop, and stretch, with full ventilation down the front of the legs, and round three-quarters around back, it means you’re getting airflow to on your lower half to the nth degree.

Safety first
A longstanding favorite in the collection, the Airwave 4 Ladies is a fan favorite within the ventilated pants category and has a Class AA CE certification. It also includes SEESMART hip and adjustable knee protection. Laminated reflection can also be found at the knees, so riders are more visible in low-light situations.

Class AA certified according to standard EN 17092-3:2020

Protection Inserts

SEESMART CE-level 1 Hip Protectors - RV33
SEESMART hip protectors offer the highest level of flexibility while still passing the EN 1621-1:2012 CE-level 1 impact tests, in both normal and hot (T+) conditions.
SEESMART CE-level 1 Knee Protectors
The SEESMART CE-level 1 RV36 knee protector is our ultra-thin and comfortable armor found at the knees of a garment.

Ventilation

Fully ventilated mesh

Adjustability

Adjustable knee protection
Adjustment strap at waist
Adjustment tab at ankle

Pockets

Two slit pockets on upper legs

Regular fit

The Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider's physique.

Features

Prepared for Strapper suspenders
Short connection zipper: The short connection zipper is the shorter, simpler and quicker choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.
B-lock button closure at front
Grip panel at seat
3D mesh protector pockets

Outer Shell

PWR|Shell mesh: This PWR|Shell is knitted in an open structure, to allow for breathability and flexibility, which maintains comfort as well as safety.
Polyester ripstop
Polyester stretch

Lining

Mesh

Visibility

Laminated reflection at knee: Laminated reflection at the knee provides additional visibility in inclement weather or low-lighting situations so riders can be better seen.

Sustainability

Vegan
Outer shell made with recycled polyester
Lining made with recycled polyester

Wash & Care

Outershell

	Machine wash 30°C, mild cycle
	Do not bleach
	Do not tumble dry
	Do not iron
	Do not dry clean

Warnings

Refer to the user manual

Remove protectors before cleaning

Wash inside out

REV'IT! CONVERGENT H20 LADIES PANTS - BLACK

$399.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Simple, effective, and waterproof - the Convergent H2O Ladies pants are designed to get you going and keep you going wherever your touring adventure takes you. Featuring a detachable thermal liner, CE-level 2 SEEFLEX knee armor, and CE-level 1 SEESMART hip protection, they are well-equipped for the journey ahead.

Confidence and comfort
Ride with confidence, knowing you have a fixed waterproof hydratex mesh G-liner to keep you dry. Fit-adjustment options at the waist (straps) and bottom hems (hook-and-loop) ensure all-day comfort, while a short connection zipper allows you to secure the Convergent H2O Ladies pants to your riding jacket - keeping out the breeze and preventing your lower back from being exposed.

Ready for the ride
The Convergent H2O Ladies pants provide everything you need to set off on your journey. Practical features include grip patches to keep you firmly seated, a handy thigh-mounted cargo pocket for essentials, and strategically placed reflective elements to enhance visibility. With all these features, you're ready to go - no matter the weather.

Class AA certified according to standard EN 17092-3:2020

Specs and features

Insulation: detachable thermal liner
Waterproofing: hydratex|Mesh G-liner - The 100% waterproof hydratex|G-liner coating is applied to the mesh inner lining of the garment. The seams are sealed for maximum waterproofness. This makes the wearing comfort optimal, while the functional properties of the G-liner construction are preserved.
Protection inserts:
- SEEFLEX CE-level 2 Knee Protectors: Certified CE-level 2 according to the new norm EN 1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.
- SEESMART CE-level 1 Hip Protectors - RV33: SEESMART hip protectors offer the highest level of flexibility while still passing the EN 1621-1:2012 CE-level 1 impact tests, in both normal and hot (T+) conditions.
Visibility: Laminated reflection at calves - Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
Pockets: slit pocket at wait and stash pocket on upper leg
Regular fit: The Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider's physique.
Adjustment strap at calves
Stretch panel at sides
Zipper and button-closure front
Outer shell
- High density polyester 600D - This fabric takes polyester yarn and weaves it with a finer polyester yarn, to create a high woven density that increases protection and abrasion-resistance.
- XL Polyester Ripstop 600D - Like regular polyester ripstop fabric, made to prevent tears from ripping, but with extra-large squares to create a fresh, even more rugged appeal.

Wash and Care

Outershell

	Machine wash 30°C, mild cycle
	Do not bleach
	Do not tumble dry
	Do not iron
	Do not dry clean

Warnings

Refer to the user manual

Remove protectors before cleaning

Wash inside out

Removable thermal liner

	Machine wash 30°C, very mild/wool cycle
	Do not bleach
	Do not tumble dry
	Do not iron
	Do not dry clean

Warnings

Use mild detergent

Wash inside out

REV'IT! CONVERGENT H20 LADIES PANTS - BLACK

REV'IT! ECLIPSE 2 LADIES JACKET - SILVER

$269.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Mesh textile summer jacket for urban riding

Summers seem to last longer in the city. Hotter days and warmer nights demand a riding essential – a lightweight jacket that cools you down. But the Eclipse 2 Ladies jacket doesn’t only optimize airflow. Beneath strategically placed polyester mesh panels, there’s SEESMART armor with CE-rated protection that you can rely on. Plus, plenty of practical touches for your daily trips around town like the zipped pockets, a wind catcher behind the front zipper, and a jeans loop. Beat the rush Winding your way to work in the rush hour, you’ll appreciate the breathable mesh panels at the front, the back, and the inner arms that send a current of air around your entire body. An abrasion-resistant 600-denier polyester construction adds a sense of secure comfort. You can quickly customize the fit of the Eclipse 2 with adjustable tabs at the waist, cuffs, and biceps – just loosen them off for a form-fitting amplified airflow, and a looser, cooler feel. Range-topping protection Eclipse 2 now Eclipse has evolved – now there’s SEESMART CE-Level 1 armor at the elbows and shoulders. Up your level of protection even higher with the SEESOFT CE-Level 2 back protector – inconspicuous yet highly effective impact resistance armor. Our protection has got your back without restricting your movement on every trip and around town.

COMFORT FEATURES

Adjustability:
Adjustment tab at cuffs

Adjustment tab at upper arm

Adjustment tab at waist
Pockets:
Inner pocket

Two slit pockets on front
Lining:
Mesh
Features:
Jeans loop

V-flap at cuff

CLIMATE FEATURES

Insulation:
Wind catcher behind front zipper

PROTECTION FEATURES

Protection:
Prepared for SEESOFT™ CE-level 2 Insert Back Protector

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
Polyester 600D

Polyester mesh
Visibility:
Laminated reflective logo on back

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

REV'IT! ECLIPSE 2 LADIES JACKET - SILVER

REV'IT! SAND 5 H20 GLOVES - BLACK-GREY

$199.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Waterproof, mid-cuffed, travel-ready gloves for all your adventures.

The Sand 5 H2O are the go-to gloves for the rider that doesn’t let grey skies and the possibility of rain get in the way of their riding plans. A strong foundation These gloves have been engineered specifically for riding on or off road during unstable weather conditions in spring, summer, or fall. By incorporating a waterproof and breathable hydratex|Z-liner construction with comfort-enhancing McFit® technology, these features help hands to stay dry and have a good grip when it’s slippery out there. We also introduce the tri-fleece push-pull liner to the Sand 5 H2O gloves (a feature normally found on our GTX aka GORE-TEX gloves) giving them the extra comfort factor and a premium feel. The safety element Armoring hands comes in many forms with the Sand 5 H2O gloves. The most prominent ones being the hard knuckle along with the TPU thumb protector and palm slider. TPR finger knuckles, reinforcements at the palm, a combination of leather and textile, an even larger visor wiper than before made of suede, and thanks to the rugged pull tab on the cuff, slipping on these gloves is a breeze and you can secure them in place with the hook-and-loop closure followed by the hook-and-loop wrist strap.

Comfort features

Adjustability:
Adjustment strap at wrist

Adjustment tab at cuff

Stretch at cuff

Stretch at thumb

Stretch fabric on back of hand

Stretch lips at fingers
Closure:
Hook-and-loop closure

Wrist strap
Lining:
Push-Pull tri-fleece liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Grip patch at thumb

Outseam stitching

Pull tab

Regular cuff

Suede leather visor wiper

Climate features

Waterproofing:
hydratex|Z-liner with McFit® technology

Protection features

Protection:
PWR|Yarn

Temperfoam® at cuff

Temperfoam® underneath knuckle protector

Temperfoam® underneath protectors

TPR finger knuckles

TPR hard shell knuckle

TPR little-finger knuckle

TPU hard shell palm slider

TPU hard shell thumb protector
Outer shell material:
Drum-dyed stay soft goatskin leather

Hypalon

Inside out goat suede

Leather Connect Finger Tip

PU grip

PU (polyurethane) coated fabric

PWR|4-way stretch

PWR|Shell ripstop stretch
Visibility:
laminated reflection at cuff

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.