REV'IT! ADVENTURE TRAVEL

REV'IT! VEST ATHOS 3 AIR

$104.99

Be seen with the Athos 3 Air reflective riding vest. An easy solution to be more visible in low light situations, adverse weather, or whenever you ride. Get noticed With its streamlined design, neon yellow hue, and inclusion of strategically placed 3M™ Scotchlite™ reflection stripes along the front, back, and back of shoulders, it’s a smart yet simple addition to get noticed on the road. Putting it on and taking it off is done through its center zipper. And thanks to its tight fit, rippling of the fabric by the wind is minimal. Additionally, the Athos 3 Air is fully ventilated, meaning works in perfect unison with our mesh jackets.

Comfort features

Features:
Stretchable

Climate features

Ventilation:
Fully ventilated mesh

Protection features

Outer shell material:
Polyester mesh
Visibility:
3M Scotchlite™ at front

3M Scotchlite™ reflection on shoulders

CERTIFICATION

This garment is certified according to the prEN 17092 Standard, published in 2018 and has achieved A rating.

REV'IT! VOLTIAC 3 H20 JACKET - GREEN-ANTHRACITE - 4XL - LAST ONE!

$399.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Multi-season jacket with thermal and waterproof liners.

Product description

This jacket’s previous generations are the epitome of affordable, capable, all-weather touring gear. And when the going gets tough, the Voltiac 3 H2O stays true to its roots. Only now it’s upgraded with PWR|Ripstop fabric on the shoulder, elbow, and forearm areas, plus an outer shell construction in 600-denier polyester that’s form-fitting and more than tough enough to withstand the elements. Switch seasons You’ll never be caught out by the weather in the Voltiac 3 H2O. The hydratex|Sphere mesh G-liner is waterproof yet breathable. The thermal liner will keep you cozy during most seasons, while two ventilation zippers are sealed to avoid water ingress and open the full length of your chest to optimize airflow when required. Warm, cold, wind, rain, or shine, in the Voltiac you’ll adjust just fine. Protection you can trust We could talk about motorcycle jackets all day long – and we often do. But it’s the people wearing them who matter the most. When designing and developing an affordable jacket, there is no compromise, and you can expect the same level of protection and upgrade options as with our top-of-the-range REV’IT! jackets – SEESMART CE-Level 1 at the shoulders and elbows, plus an insert for an optional SEESOFT CE-Level 2 back protector.

Comfort features

Adjustability:
Adjustment drawcord at hem

Adjustment strap at waist

Adjustment tab at cuffs

Adjustment tab at upper arm

Flexisnap at collar
Pockets:
Inner pocket within thermal liner

Slit pocket at chest

Two hand warmer pockets

Two stash pockets at front
Features:
Short connection zipper

Soft edge at collar

Two-way Collar Snap Closure System

V-flap at cuff

Climate features

Waterproofing:
hydratex|Mesh G-liner
Insulation:
Detachable thermal liner
Ventilation:
Air outlet on upper back

Zippers on chest

Protection features

Protection:
Prepared for SEESOFT CE-level 2 Insert Back Protector

Ready for Avertum Tech-Air® airbag system - ONE SIZE UP

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
Polyester 600D

Polyester ripstop
Visibility:
Laminated reflection at chest

Laminated reflection at lower arms

Laminated reflection on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating

REV'IT! VOLTIAC 3 H20 JACKET - GREEN-ANTHRACITE - 4XL - LAST ONE!

REV'IT! NITRIC 4 H20 RAIN JACKET - BLACK

$199.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

100% waterproof, premium, over jacket.

Anything that’ll keep you dry, so you can keep going, is welcome when you do get caught out in the rain. But with the Nitric 4 H2O rain jacket you’re getting not just ‘anything’ – you’re getting the premium approach to quick-action rain gear. Smooth as can be With 100% waterproof hydratex fabric that’s as smooth as can be – resisting rain pick up, it must be – you can’t miss the quality feel of the Nitric 4 H2O. The internal mesh lining has similar instantly premium appeal to it. Though it’s not just about feel. Both the smooth outer and the mesh inner are highly functional. Made to keep you dry on the one hand and with its non-stick properties on the other hand, it’s all about keeping you comfortable for however long the downpour may last. On your – dry and comfortable – way To make sure your rain jacket doesn’t lock in all your personals, we’ve added two large, snap-buttoned pockets up front. Also boosting functionality, there’s ample visibility enhancing reflection and once the rain stops, simply stuff the rain jacket back into its own carrier bag, and you’re back on your – dry and comfortable – way.

Comfort features

Adjustability:
Adjustment strap at waist

Adjustment tab at cuffs

Adjustment tab at upper arm

elasticated cuff
Pockets:
Inner napoleon pocket

Two stash pockets at front
Features:
Transport bag

Climate features

Waterproofing:
hydratex|Lite

Protection features

Outer shell material:
polyester PU coated

PWR|shell with PU coating
Visibility:
Laminated reflection on shoulders

Laminated reflective logo on back

Laminated reflective logo on chest

REV'IT! NITRIC 4 H20 RAIN JACKET - BLACK

REV'IT! G-FORCE H20 LADIES BOOTS - BLACK-WHITE

$299.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Female-specific waterproof paddock-style sport riding shoes

Taking their inspiration straight from the MotoGP and WSBK worlds, the sport-derived G-Force 2 H2O Ladies shoes have been designed to pair perfectly with slim-fitting riding jeans, a leather sport jacket, and rainy days. Wear them on your daily commute or for a casual weekend ride into or around the city without the worry of your feet getting wet in a downpour. Waterproofing woven into their DNA Because of the incorporated hydratex|Z-liner construction, the G-Force 2 H2O Ladies shoes have multi-seasonal functionality built into their DNA. After all, these shoes are all about sport and performance. In their evolution, we’ve made the silhouette more aggressive and included the optics of speed, even when they’re sitting in your foyer waiting to be worn on your next ride. On the comfort and protection front The PU leather body of the G-Force 2 H2O Ladies shoes has a microfiber base, making it not only more flexible, but also softer and more comfortable for the feet. Not to mention the female-specific patterning created for an ideal fit. Combined with the SEESOFT ankle discs, reinforced toe, heel, ankle, and side panels these features work together to take care of wrapping your feet in protection, especially when riding in the rain.

Comfort features

Closure:
hook-and-loop closure

Laces
Lining:
Soft mesh lining
Features:
Padded tongue

Rubber gear shift pad

Climate features

Waterproofing:
hydratex|Z-liner

Protection features

Protection:
Reinforced ankle

Reinforced heel

Reinforced side panel

Reinforced toe

Thermoformed heel cup

Thermoformed toecap
Outer shell material:
Artificial Leather

Artificial suede microfiber

Nylon ripstop

Rubber

Seamless TPU film
Visibility:
Reflection at heel

CERTIFICATION

These boots or shoes are certified according to the EN 13634 Standard, published in 2017 and have achieved level 1 | 1 | 2 | 1 WR rating.

REV'IT! G-FORCE H20 LADIES BOOTS - BLACK-WHITE

REV'IT! SAND 5 H20 LADIES JACKET - BLACK-ANTHRACITE

$779.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Multi-season, multi-purpose, female-specific textile jacket for the adventure-hungry traveler

The Sand Ladies series is an icon in the REV'IT! lineup, embodying a distinctive style that has, over the years, defined travel within the motorcycle industry. That legacy continues with the Sand 5 H2O Ladies jacket. The Evolution The latest iteration of the Sand series represents an evolution rather than a revolution. This change is marked by small tweaks and adjustments aimed at enhancing its overall performance. This Sand 5 H2O Ladies jacket (as part of the Sand 5 H2O Ladies outfit with matching pants) remains as relevant today as it was 25 years ago. In crafting the Sand 5, a delicate balance is struck, paying homage to the past while looking towards the future. Shifting Styles The Sand 5 H2O Ladies jacket takes on a slightly more sport-driven character compared to the Sand 4. As adventure bikes become more sport-centric and dynamic, the Sand 5 H2O Ladies reflects this industry shift. Matching the fast-paced nature of sport and the thirst for the uncharted, the Sand 5 H2O Ladies jacket fuses two genres into one. Furthermore, the jacket is hydrapak prepared in the lower back pocket (like with our Trail vest) with a cutout in the left corner to feed a water tube underneath the arm and up the front to be attached on the left side. The Over and Under Concept Like we previously introduced in one of our ADV jackets—the Offtrack 2 H2O—we’ve taken our know-how of the proven over and under waterproof liner concept and applied it to our Sand 5 H2O jacket. Wear the detachable hydratex 3L liner over or under your protective layer according to your personalized preference for keeping the rain away—and keeping you dry. Though we recommend wearing it over because of the high-performance characteristics of the membrane and its design-driven aesthetics. A detachable, separately wearable thermal liner is also included to up the ante on warmth and comfort on cold, rainy days. Female-Specific Details Special attention has been given to the fit of the Sand 5 H2O Ladies jacket to ensure that, even with all the inclusion of straps and buckles, the form and silhouette still look appealing from a design perspective. Additionally, the jacket is hydration pack prepared in the lower back pocket (similar to our Trail vest), with a cutout in the left corner to feed a water tube underneath the arm and up the front to be attached on the left side.

Comfort features

Adjustability:
Adjustable elbow protection

Adjustment drawcord at hem

Adjustment strap at lower arm

Adjustment tab at upper arm

Double adjustment strap at waist

Flexisnap at collar

Variable height adjustment straps at waist
Pockets:
Inner pocket within thermal liner

Slit pocket at back

Stash pocket at waist

Two external pockets at thermal liner

Two inner pockets

Waterproof inner pocket within waterproof liner
Lining:
Mesh

Soft spacer mesh
Features:
3L hydratex over jacket

Cuff zipper

External hang loop

Long connection zipper

Lower-back pocket prepared for 1.5L hydration pack

Prepared for REV’IT! Segur neck brace

Separately wearable thermal liner

Short connection zipper

Soft edge at collar

Two-way Collar Snap Closure System

Climate features

Waterproofing:
Detachable hydratex|3L liner
Insulation:
Detachable thermal liner
Ventilation:
Ventilation panels on back side

Ventilation panels on chest

XL zippers on sleeves

Protection features

Protection:
Prepared for SEESOFT CE-level 2 Insert Back Protector

SEEFLEX CE-level 2 Elbow Protectors

SEEFLEX CE-level 2 Shoulder Protectors
Outer shell material:
3D air mesh

High density polyester 600D

Polyester ripstop

Stretch mesh
Visibility:
Laminated reflection at chest

Laminated reflection at upper arms

Laminated reflection on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

REV'IT! SAND 5 H20 LADIES JACKET - BLACK-ANTHRACITE

REV'IT! NITRIC 4 H2O RAIN PANTS - BLACK

$179.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

100% waterproof, premium, over pants

With a waterproofed zipper along the entire length of the right leg and another running up to above the left knee, the Nitric 4 H2O rain pants are made to don in moments – with your motorcycle shoes or boots still on, obviously. Because when the going gets wet, time is of the essence. Get back out there Just unpack the 100% waterproof Nitric 4 H2O pants from the carrier bag and slide into its non-stick pant legs, zip up, make final adjustments around the waist and bottom hem, and get yourself back out there in no time at all. Comfort is a safety requirement The high-quality mesh liner doesn’t just allow for easy access, but also keeps the rain pants from sticking to the jeans or motorcycle pants you’re already wearing. That way you’ll stay comfortable, and comfort is a definite safety requirement in adverse weather. Visibility is another obvious one, we’ve tackled by incorporation plenty of visibility-improving reflection into the design.

Comfort features

Adjustability:
Adjustment strap at waist

Adjustment tab at cuffs

Adjustment tab at upper arm

elasticated cuff
Pockets:
Inner napoleon pocket

Two stash pockets at front
Features:
Transport bag

Climate features

Waterproofing:
hydratex|Lite

Protection features

Outer shell material:
polyester PU coated
Visibility:
Laminated reflection on shoulders

Laminated reflective logo on back

Laminated reflective logo on chest

CERTIFICATION

This garment is certified according to the prEN 17092 Standard, published in 2018 and has achieved A rating.

REV'IT! NITRIC 3 H2O RAIN PANTS SIZE GUIDE

REV'IT! SURFACE JACKET - LIGHT-GREY

$579.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Full-stretch, AA safety rated, DIRT Series, off-road jacket

Lightweight

Fully made of stretch material

Thumb loops at the cuffs

Adding to an already strong arsenal of off-road motorcycle outdoor lifestyle products in our DIRT Series collection, we bring you the Surface jacket. Stretch and safety for days, the impetus behind its creation was to engineer a jacket with as much stretch as possible using an open-knit construction, in this case, PWR|Stretch, to maximize comfort when moving around. CORDURA® ripstop was then added to reinforce its structural stability, along with the inclusion of SEESMART armor at the elbows and shoulders (with the possibility to add the back protector if desired) to give it a AA safety rating. One with nature: When searching for your next adventure in the heart of nature, know that what has come before has been used again. The parts that are lined on the inside of the Surface jacket has been made with recycled polyester. Roam free, explore more, and enjoy every moment.

Comfort features

Adjustability:
Adjustment drawcord at hem
Pockets:
Chest pocket

Inner pocket

Slit pocket at back

Two slit pockets at waist
Features:
Full stretch

Stretchable cuff

Thumb loop

Climate features

Ventilation:
Perforation on upper front

Protection features

Protection:
Prepared for SEESOFT CE-level 2 Insert Back Protector

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors

Thumb loops
Outer shell material:
CORDURA® 750D ripstop

PWR|Shell breathable stretch
Visibility:
Laminated reflection at collar

Laminated reflection at upper arms

Laminated reflection on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

REV'IT! SAND 5 H20 PANTS - SILVER-BLACK

$579.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Multi-season, multi-purpose textile pants for the adventure-hungry traveler.

The Sand series is an icon in the REV'IT! lineup, embodying a distinctive style that has, over the years, defined travel within the motorcycle industry. That legacy continues with the Sand 5 H2O pants. Designed for the Future The Sand 5 H2O pants take on a slightly more speed-driven character compared to the outgoing Sand 4. As adventure bikes become more sportive and dynamic, the Sand 5 H2O pants reflect this industry shift. Through this new design, we were able to include drop-down ventilation panels on both front thighs and calf adjustable straps. Higher quality materials are also used to ensure the Sand 5 H2O pants carry you through whatever adventure you embark on. The Over and Under Concept We’ve taken our know-how of the proven over and under waterproof liner concept and applied it to our Sand 5 H2O pants. Wear the detachable liner over or under your protective, CE-certified layer according to your personalized preference for keeping the rain away—and keeping you dry. The waterproof liner, made of a resilient 3L hydratex material, has reinforcements at the seat and inside of the knees for long-term durability. Furthermore, to accommodate the over-under construction, the waistband of the main trousers—aka the protection layer—comes with a belt buckle and a stretch insert strategically positioned at the center front of the pant for improved comfort when sitting. The RWL (removable waterproof layer) is equipped with a snap with two-position adjustment. A detachable thermal liner is also included to up the ante on warmth and comfort on cold, rainy days.

Comfort features

Adjustability:
Adjustable knee protection

Adjustable waist belt

Adjustment strap at calves

Adjustment tab at ankle
Pockets:
Slit pockets on hip
Features:
3L hydratex over jacket

B-lock button closure at front

Calf zipper for easy entrance

grip panel at seat

Long connection zipper

Prepared for Strapper suspenders

Short connection zipper

Stretch at knees

Stretch at waist

Climate features

Waterproofing:
Detachable hydratex|3L liner
Insulation:
Detachable thermal liner
Ventilation:
Ventilation panels on upper legs

Protection features

Protection:
SEEFLEX CE-level 2 Knee Protectors

SEESMART CE-level 1 Hip Protectors

Soft spacer mesh protector pockets
Outer shell material:
3D air mesh

High density polyester 600D

Polyester ripstop

PWR|Shell stretch
Visibility:
Laminated reflection at ankles

Laminated reflection on upper legs

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! CAYENNE 2 GLOVES - BLACK

$209.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Full-spec leather summer riding gloves for on and off-road adventure riding all over the world.

The Cayenne 2 are the ideal summer motorcycle gloves in our adventure collection. They’re lightweight and comfortable and offer the highest level of protection without sacrificing dexterity; ensuring the ideal feel on the controls of your motorcycle. Your hands will stay fresh and dry in warm temperatures thanks to the built-in breathability provided by the perforated leather sections of.

A special grip patch at palm and thumb offers extra grasp on the handlebars when the riding gets more technical. The hard shell knuckle, palm sliders, and thumb protector offer extra abrasion resistance and armor in case of a slide or impact. Thanks to the Connect Finger Tip, navigating through your apps and the world won’t require you to take your motorcycle gloves off.

The Cayenne 2 motorcycle gloves are designed to fit like a second skin and will keep your hands comfortable and protected during trips in warm weather.

REV'IT! SAND 5 H20 JACKET - GREY-DARK GREY

$779.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Multi-season, multi-purpose textile jacket for the adventure-hungry traveler.

The Sand series is an icon in the REV'IT! lineup, embodying a distinctive style that has, over the years, defined travel within the motorcycle industry. That legacy continues with the Sand 5 H2O jacket. The Evolution The latest iteration of the Sand series represents an evolution rather than a revolution. This change is marked by small tweaks and adjustments aimed at enhancing its overall performance. The Sand 5 jacket (as part of the Sand 5 outfit with matching pants) remains as relevant today as it was 15 years ago. In crafting the Sand 5, a delicate balance is struck, paying homage to the past while looking towards the future. Shifting Styles The Sand 5 H2O jacket takes on a slightly more sport-driven character compared to the Sand 4. As adventure bikes become more sport-centric and dynamic, the Sand 5 H2O reflects this industry shift. Matching the fast-paced nature of sport and the thirst for the uncharted, the Sand 5 H2O jacket fuses two genres into one. Furthermore, the jacket is hydration pack prepared in the lower back pocket (like with our Trail vest), with a cutout in the left corner to feed a water tube underneath the arm and up the front to be attached on the left side. The Over and Under Concept Like we previously introduced in one of our ADV jackets—the Offtrack 2 H2O—we’ve taken our know-how of the proven over and under waterproof liner concept and applied it to our Sand 5 H2O jacket. Wear the detachable hydratex 3L liner over or under your protective layer according to your personalized preference for keeping the rain away—and keeping you dry. Though we recommend wearing it over because of the high-performance characteristics of the membrane and its design-driven aesthetics. A detachable, separately wearable thermal liner is also included to up the ante on warmth and comfort on cold, rainy days.--

Comfort features

Adjustability:
Adjustable elbow protection

Adjustment drawcord at hem

Adjustment strap at lower arm

Adjustment tab at upper arm

Double adjustment strap at waist

Flexisnap at collar

Variable height adjustment straps at waist
Pockets:
Inner pocket within thermal liner

Slit pocket at back

Stash pocket at waist

Two external pockets at thermal liner

Two inner pockets

Waterproof inner pocket within waterproof liner
Lining:
Mesh

Soft spacer mesh
Features:
3L hydratex over jacket

Cuff zipper

External hang loop

Long connection zipper

Lower-back pocket prepared for 1.5L hydration pack

Prepared for REV’IT! Segur neck brace

Separately wearable thermal liner

Short connection zipper

Soft edge at collar

Two-way Collar Snap Closure System

Climate features

Waterproofing:
Detachable hydratex|3L liner
Insulation:
Detachable thermal liner
Ventilation:
Ventilation panels on back side

Ventilation panels on chest

XL zippers on sleeves

Protection features

Protection:
Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector

Prepared for SEESOFT CE-level 2 Insert Back Protector

SEEFLEX CE-level 2 Elbow Protectors

SEEFLEX CE-level 2 Shoulder Protectors
Outer shell material:
3D air mesh

High density polyester 600D

Polyester ripstop

Stretch mesh
Visibility:
Laminated reflection at chest

Laminated reflection at upper arms

Laminated reflection on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating

REV'IT! SAND 5 H20 JACKET - GREY-DARK GREY

REV'IT! COMPONENT 3 H2O JACKET - BLACK-DARK BLUE

$739.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight and waterproof, hooded, off-road adventure jacket

The evolution of a DIRT Series modern classic, the Component 3 H2O builds upon this pinnacle adventure jacket’s well-received, feature-driven design approach by making the stand-out details even better and adding another few for good measure.

Form and function in fashionable harmony
Inspired by designs used throughout the outdoor segment, it’s very much form and function in fashionable harmony. Not to say it’s a compromise – more the exact opposite. Its strategically matched, abrasion resistant Cordura® ripstop and PWR|Shell stretch ripstop materials give a hard-wearing, durable look to the Component 3 H2O’s actual lightweight and unmistakenly made-for-purpose characteristics. With 100% wind and waterproof, 3L hydratex lamination, taped seams, CE-level 1 SEESMART armor, and an added dedicated pocket to upgrade things with a CE-level 2 SEESOFT back protector, the Component 3 H2O pulls out all the stops.

Small changes. Big difference.
We know that small changes can make a big difference. That’s why we tweaked the pocket configuration. With the pocket direction now facing away from the body, contents are easier to access with or without gloves on. Furthermore, we’ve added a CFZ VCS|Aquadefence ventilation zipper (CFZ meaning center front zipper) allowing more direct-to-body airflow when you need it the most. The detachable hood shape has also been reconfigured to be more fitted and to cinch around the rider’s head as opposed to on the rider’s head. Its active fit adds a casual, outdoor lifestyle feel, while the fitting has been primarily designed to slip over our Proteus protector jacket for when you’re really looking to get your adventure on. And with a unisex fit and updated grading, the Component 3 H2O now accommodates both men and women, facilitating a better fit across various sizes, especially for smaller frames.

Note: We advise women to order a size smaller than they would regularly buy.

Comfort features

Adjustability:
Adjustment drawcord at hem

Adjustment tab at cuffs
Pockets:
internal chest pocket

Slit pocket at back

Two slit pockets at waist
Lining:
Soft spacer mesh
Features:
Adjustment drawcord at hood

Comfort collar

Detachable hood

Stretchable

YKK AQUASEAL® Front Zipper

Climate features

Waterproofing:
hydratex|3L
Ventilation:
Already in system as: CFZ|VCS Aquadefence

Zipper at upper back

Zippers on upper arms

Protection features

Protection:
Prepared for SEESOFT CE-level 2 Insert Back Protector

Ready for Avertum Tech-Air® airbag system - ONE SIZE UP

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors

Soft spacer mesh protector pockets
Outer shell material:
3L CORDURA® 750D ripstop

Neoprene

PWR|Shell ripstop stretch
Visibility:
Laminated reflection at collar

Laminated reflection on back

Laminated reflection on hood

Laminated reflective logo on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating.

REV'IT! COMPONENT 3 H2O JACKET - BLACK-DARK BLUE

REV'IT! COMPONENT 3 H2O JACKET - BLACK-SAND

$739.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight and waterproof, hooded, off-road adventure jacket

The evolution of a DIRT Series modern classic, the Component 3 H2O builds upon this pinnacle adventure jacket’s well-received, feature-driven design approach by making the stand-out details even better and adding another few for good measure.

Form and function in fashionable harmony
Inspired by designs used throughout the outdoor segment, it’s very much form and function in fashionable harmony. Not to say it’s a compromise – more the exact opposite. Its strategically matched, abrasion resistant Cordura® ripstop and PWR|Shell stretch ripstop materials give a hard-wearing, durable look to the Component 3 H2O’s actual lightweight and unmistakenly made-for-purpose characteristics. With 100% wind and waterproof, 3L hydratex lamination, taped seams, CE-level 1 SEESMART armor, and an added dedicated pocket to upgrade things with a CE-level 2 SEESOFT back protector, the Component 3 H2O pulls out all the stops.

Small changes. Big difference.
We know that small changes can make a big difference. That’s why we tweaked the pocket configuration. With the pocket direction now facing away from the body, contents are easier to access with or without gloves on. Furthermore, we’ve added a CFZ VCS|Aquadefence ventilation zipper (CFZ meaning center front zipper) allowing more direct-to-body airflow when you need it the most. The detachable hood shape has also been reconfigured to be more fitted and to cinch around the rider’s head as opposed to on the rider’s head. Its active fit adds a casual, outdoor lifestyle feel, while the fitting has been primarily designed to slip over our Proteus protector jacket for when you’re really looking to get your adventure on. And with a unisex fit and updated grading, the Component 3 H2O now accommodates both men and women, facilitating a better fit across various sizes, especially for smaller frames.

Note: We advise women to order a size smaller than they would regularly buy.

Comfort features

Adjustability:
Adjustment drawcord at hem

Adjustment tab at cuffs
Pockets:
internal chest pocket

Slit pocket at back

Two slit pockets at waist
Lining:
Soft spacer mesh
Features:
Adjustment drawcord at hood

Comfort collar

Detachable hood

Stretchable

YKK AQUASEAL® Front Zipper

Climate features

Waterproofing:
hydratex|3L
Ventilation:
Already in system as: CFZ|VCS Aquadefence

Zipper at upper back

Zippers on upper arms

Protection features

Protection:
Prepared for SEESOFT CE-level 2 Insert Back Protector

Ready for Avertum Tech-Air® airbag system - ONE SIZE UP

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors

Soft spacer mesh protector pockets
Outer shell material:
3L CORDURA® 750D ripstop

Neoprene

PWR|Shell ripstop stretch
Visibility:
Laminated reflection at collar

Laminated reflection on back

Laminated reflection on hood

Laminated reflective logo on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating.

REV'IT! COMPONENT 3 H2O JACKET - BLACK-SAND

REV'IT! COMPONENT 3 H2O PANTS - BLACK

$589.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight, waterproof, DIRT Series off-road pants

The Component 3 H2O pants are made for off-road riders who seek lightweight and waterproof pants that offer versatility in every aspect. Whether worn separately or as rain-ready overpants without the protectors, they’re ready to shield you on the trails to come.

Advanced technical elements
Constructed with 3L stretch and heavy ripstop 3L fabric, these pants embody the layering concept for optimal comfort and functionality. The full-length zipper from hem to hip allows easy on-and-off even with boots on, while thigh ventilation and a generous fit make them perfect for overtrouser use. Certified Class A, these pants provide both flexibility and protection.

Feature-rich design
The Component 3 H2O pants boast a thoughtfully placed cargo pocket on the thigh, accommodating the aforementioned nearly full-length outer seam zipper. Thigh ventilation ensures air easily reaches the legs, and the seamless waistband adapts to various hip shapes for enhanced comfort. An aluminum hook replaces the traditional plastic buckle, offering greater durability and reduced bulk.

Enhanced protective features
For safety, these DIRT Series pants come with integrated SEESMART armor, which can be upgraded to a Scram knee protector or paired with a knee brace for added protection. This customization ensures riders have the best possible defense against impacts, tailored to their specific needs.

Note: We advise women to order a size smaller than they would regularly buy.

Comfort features

Adjustability:
Adjustable waist belt

Adjustment tab at lower leg
Pockets:
Stash pocket on upper leg
Lining:
Soft spacer mesh
Features:
B-lock button closure at front

grip panel at seat

silicon print inside waistband

Stretch at back

Stretch at crotch

YKK Aquaguard® easy entrance zipper

Climate features

Waterproofing:
hydratex|3L
Ventilation:
Ventilation zippers on upper legs

Protection features

Protection:
Double textile seat

SEESMART CE-level 1 Hip Protectors

SEESMART CE-level 1 Knee Protectors

Soft spacer mesh protector pockets
Outer shell material:
3L CORDURA® 750D ripstop

PWR|Shell ripstop stretch

Sure grip
Visibility:
Laminated reflective logo at lower leg

Laminated reflective logo on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating.

REV'IT! BLACKWATER 3 H2O JACKET - OCHER YELLOW-BLUE

$729.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight and waterproof, hooded, DIRT Series, off-road adventure smock

Fully functional aesthetics never looked this good. With a design borrowing heavily from the outdoor scene, the CE-certified motorcycle-ready Blackwater 3 H2O smock is all about looking purposeful as much as being purposeful. Inherent to the smock jacket concept, you put it on over your head, which is made easy with the addition of a side-entrance zipper. Keeping the front clean, and fully weatherproof.

A strong smock
Created with CORDURA® ripstop and 3L PWR|Shell ripstop stretch, the outer shell of the Blackwater 3 H2O means business when it comes to shielding you against the road. And when it comes to shielding you against the elements, the 3L hydratex waterproofing comes into play, along with taped seams. And within those dreary weather conditions, laminated reflection at the back, hood, and logo help riders to be seen when visibility is not at its peak.

In the details
We know that small changes can make a big difference. That’s why we tweaked the pocket configuration. With the pocket direction now facing away from the body, contents are easier to access with or without gloves on. The detachable hood shape has also been reconfigured to be more fitted and to cinch around the rider’s head as opposed to on the rider’s head. Its active fit adds a casual, outdoor lifestyle feel, while the comfortably sizing has been primarily designed to slip over our Proteus protector jacket for when you’re really looking to get your adventure on. The small stash pocket now also has magnets instead of snap buttons, making it easier to open and close. Furthermore, we added VISLON® AquaGuard® zippers with a purpose - easier to clean and operate.

Fit for all
By creating the Blackwater 3 H2O with a unisex fit, we open this product up to be more inclusive to a spectrum of body shapes; with the smaller sizing also geared toward women. And with an offering of more vibrant colors to bring out playfulness of the collection – all while keeping DNA of the founding DIRT collection – throw the Blackwater 3 H2O smock over your head, zip up, and hit the trails.

Note: We advise women to order a size smaller than they would regularly buy.

Comfort features

Adjustability:
Adjustment drawcord at hem

Adjustment drawcord at waist

Adjustment tab at cuffs
Pockets:
Kangaroo pocket at front

Two slit pockets at waist
Lining:
Soft spacer mesh
Features:
Adjustment drawcord at hood

Detachable hood

Easy entrance zipper at side seam

Stretchable

Climate features

Waterproofing:
hydratex|3L
Ventilation:
Zipper at upper back

Zippers on upper arms

Protection features

Protection:
Prepared for SEESOFT CE-level 2 Insert Back Protector

Ready for Avertum Tech-Air® airbag system - ONE SIZE UP

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors

Soft spacer mesh protector pockets
Outer shell material:
3L CORDURA® 750D ripstop

PWR|Shell ripstop stretch
Visibility:
Laminated reflection on back

Laminated reflection on hood

Laminated reflective logo on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating.

REV'IT! BLACKWATER 3 H2O JACKET - OCHER YELLOW-BLUE

REV'IT! CONTINENT 2 PANTS - ANTHRACITE-BLACK

$549.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, lightweight and flexible, over-the-boot, off-road riding pants

Endless off-road exploration on two wheels starts with the active fit, over-the-boot Continent 2 pants – as part of our DIRT Series collection. Take on the trails less traveled.

Built tough
With the majority of this pant being made up from our rugged abrasion resistant CORDURA® ripstop fabric combined with PWR|Shell ripstop stretch, these pants provide maximum flexibility and comfort. Soft leather panels by the inner knee and inside of the lower legs are there to provide extra grip and protection when standing on the motorcycle.

The evolution
The Continent 2 pants retain all the characteristics that made the original pant great. This style excels on days where you need splash protecion but not full-on waterproofing. The over-the-boot design combined with the wateproof inner gator helps reduce any water and mud driving up the inside of the pants when hiting water sections at speed. As with all the new DIRT Series pants, pockets have been moved to the front for ease of use and a new waist band design combined with a durable aluminium hook closure improves comfort for long days in the saddle. Thigh ventilation and an strategically placed stretch inserts make these pants an essential piece inthe collection. With a unisex fit and updated grading, they can now easily accommodate both men and women, facilitating a better fit across various sizes, especially for smaller frames.

The right armor
Protection is provided by our removable SEESMART CE-level 1 protectors at the hips and knees. That said, the knee construction is designed to work with knee braces or our Scram knee protectors – with the SEESMART protectors first removed, of course.

Note: We advise women to order a size smaller than they would regularly buy.

Comfort features

Adjustability:
Adjustable waist belt

Adjustment tab at ankle
Pockets:
Two slit pockets on upper legs
Lining:
Mesh

Soft spacer mesh
Features:
B-lock button closure at front

Calf zippers

grip panel at seat

Grip panels at inside knees

Stretch at back

Stretch at calf

Stretch at crotch

Stretch at knees

Climate features

Ventilation:
Ventilation zippers on upper legs

Protection features

Protection:
SEESMART CE-level 1 Hip Protectors

SEESMART CE-level 1 Knee Protectors

Soft spacer mesh protector pockets
Outer shell material:
CORDURA® 750D ripstop

Monaco performance cowhide

PWR|Shell rib stretch

Sure grip
Visibility:
Laminated reflective logo on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating.

REV'IT! CONTINENT 2 PANTS - ANTHRACITE-BLACK

REV'IT! CONTINENT 2 PANTS - BROWN-BLACK

$549.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, lightweight and flexible, over-the-boot, off-road riding pants

Endless off-road exploration on two wheels starts with the active fit, over-the-boot Continent 2 pants – as part of our DIRT Series collection. Take on the trails less traveled.

Built tough
With the majority of this pant being made up from our rugged abrasion resistant CORDURA® ripstop fabric combined with PWR|Shell ripstop stretch, these pants provide maximum flexibility and comfort. Soft leather panels by the inner knee and inside of the lower legs are there to provide extra grip and protection when standing on the motorcycle.

The evolution
The Continent 2 pants retain all the characteristics that made the original pant great. This style excels on days where you need splash protecion but not full-on waterproofing. The over-the-boot design combined with the wateproof inner gator helps reduce any water and mud driving up the inside of the pants when hiting water sections at speed. As with all the new DIRT Series pants, pockets have been moved to the front for ease of use and a new waist band design combined with a durable aluminium hook closure improves comfort for long days in the saddle. Thigh ventilation and an strategically placed stretch inserts make these pants an essential piece inthe collection. With a unisex fit and updated grading, they can now easily accommodate both men and women, facilitating a better fit across various sizes, especially for smaller frames.

The right armor
Protection is provided by our removable SEESMART CE-level 1 protectors at the hips and knees. That said, the knee construction is designed to work with knee braces or our Scram knee protectors – with the SEESMART protectors first removed, of course.

Note: We advise women to order a size smaller than they would regularly buy.

Comfort features

Adjustability:
Adjustable waist belt

Adjustment tab at ankle
Pockets:
Two slit pockets on upper legs
Lining:
Mesh

Soft spacer mesh
Features:
B-lock button closure at front

Calf zippers

grip panel at seat

Grip panels at inside knees

Stretch at back

Stretch at calf

Stretch at crotch

Stretch at knees

Climate features

Ventilation:
Ventilation zippers on upper legs

Protection features

Protection:
SEESMART CE-level 1 Hip Protectors

SEESMART CE-level 1 Knee Protectors

Soft spacer mesh protector pockets
Outer shell material:
CORDURA® 750D ripstop

Monaco performance cowhide

PWR|Shell rib stretch

Sure grip
Visibility:
Laminated reflective logo on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating.

REV'IT! TERRITORY 2 JACKET - SAND-GREEN

$399.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

CE-certified, ventilated, zippered, mesh off-road/MX jacket

Designed for off-road/trail riders who are searching for the best routes with maximum mobility and ventilation, the Territory 2 jacket ticks the right boxes in terms of its lightweight and flexible characteristics.

Advanced materials and fit
The Territory 2 focuses on improved materialization and fit, for enhanced flexibility strech is now placed across the yoke and upper arms. The result is a jacket that’s comfortable, lightweight, and highly ventilating, ensuring optimal performance during intense rides. With a unisex fit and updated grading, it now accommodates both men and women, facilitating a better fit across various sizes, especially for smaller frames.

Feature rich
Making sure you’re ready for your next adventure at any time, the Territory 2 jacket is designed with practical features, including laser-cut holes along the collar and yoke for enhanced ventilation, keeping you cool even during strenuous activities. The cuffs are now made from stretch material, providing increased durability and resistance to snagging. Vibrant pops of color on the zipper pullers add a lively and stylish touch, making it not only functional but also visually appealing.

Enhanced protection
For added safety, SEESMART protection is included at the shoulders and elbows, offering essential impact resistance without compromising flexibility. Additionally, there is now a dedicated pocket for those who wish to add a back protector, providing an extra layer of defense. This makes the jacket a comprehensive protective solution for all riders, catering to their specific safety needs.

Note: We advise women to order a size smaller than they would regularly buy.

Comfort features

Adjustability:
Adjustment drawcord at hem
Pockets:
internal chest pocket

Slit pocket at back

Slit pocket at chest

Two lined slit pockets at waist
Lining:
Mesh

Soft spacer mesh
Features:
Elastic key cord in pocket

Stretchable cuff

Stretch at back

Stretch at shoulders

Stretch panel at sides

Climate features

Ventilation:
Fully ventilated mesh

Protection features

Protection:
Prepared for SEESOFT CE-level 2 Insert Back Protector

Ready for Avertum Tech-Air® airbag system - ONE SIZE UP

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors

Soft spacer mesh protector pockets

Thumb loops
Outer shell material:
CORDURA® 750D ripstop

PWR|Shell mesh

PWR|Shell rib stretch
Visibility:
Laminated reflection at collar

Laminated reflection on back

Laminated reflective logo on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating.

REV'IT! TERRITORY 2 PANTS - SAND-BLACK

$399.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, in-boot, flexible, lightweight, and ventilated off-road pants

The Territory 2 pants are geared toward off-road and trail riders seeking lightweight, flexible, and ventilated gear that allows for maximum mobility. Crafted to enhance your riding experience, these pants ensure you stay comfortable and agile on any terrain.

The evolution
The latest iteration focuses on materialization and fit, utilizing ample breathable mesh and CORDURA® ripstop fabric backed with a soft jersey fabric for added comfort. The pants feature rib stretch material, providing structured stretch that is both lightweight and ventilating. Leather panels at the inner knee enhance durability, and the single-layer construction (without a fixed lining, same as our Peninsula 2 pants) prevents unnecessary bunching, keeping you cooler. The unisex fit has been regraded to accommodate both men and women, with smaller sizes specifically designed for women.

Thoughtful design features
Laser-cut holes along the thighs provide excellent ventilation, ensuring you remain cool during intense rides. The waistband has been redesigned, replacing the plastic ratchet with a more durable belt featuring an aluminum buckle, inspired by the sleek design of the Surface. Pockets have been repositioned towards the front of the thigh and now include an expansion V-flap, allowing easy access even while seated.

Enhanced protective elements
For safety, these pants come with integrated SEESMART protection at the hips and knees, offering essential impact resistance. Riders seeking additional protection can remove the SEESMART armor and upgrade to Scram knee protectors or use knee braces for enhanced defense. This customizable protection ensures that every rider can tailor the pants to their specific needs, providing peace of mind on every adventure.

Note: We advise women to order a size smaller than they would regularly buy.

Comfort features

Adjustability:
Adjustable waist belt
Pockets:
Two slit pockets on upper legs
Lining:
Mesh

Soft spacer mesh
Features:
B-lock button closure at front

grip panel at seat

Stretch at calf

Stretch at crotch

Stretch at knees

Stretch at waist

Climate features

Ventilation:
Ventilation panels on back side

Ventilation panels on upper legs

Protection features

Protection:
SEESMART CE-level 1 Hip Protectors

SEESMART CE-level 1 Knee Protectors

Soft spacer mesh protector pockets
Outer shell material:
CORDURA® 750D ripstop

Monaco performance cowhide

PWR|Shell mesh

PWR|Shell rib stretch

Sure grip
Visibility:
Laminated reflective logo on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating.

REV'IT! PENINSULA 2 PANTS - GREEN-BLACK

$439.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, in-boot, off-road, lightweight, flexible riding pants

Meet the Peninsula 2. A purpose-built pair of active fit pants for off-road riders who prefer an in-boot configuration – as part of our DIRT Series collection.

The evolution
Made with maximum movement in mind, the Peninsula 2 pants are comprised with PWR|Shell ripstop stretch and CORDURA® ripstop, internally backed with soft jersey fabric for all-day wearing comfort. Lightweight and durable, they’re designed without a lining for easier, less restrictive pairing with standalone limb protection. The Peninsula 2 is designed to pair perfectly with the waterproof Component 3 H2O pants, worn over the top to provide a shield against the rain. Leather patches at the inner knee make up the exoskeleton of these in-boot pants.

The right armor
Our flexible, lightweight, and removable SEESMART CE-level 1 protectors are featured at the hips and knees. And when the SEESMART armor is removed from the knees, the pants can be worn over our CE-level 2 Scram knee protectors. The Peninsula 2 pants are also patterned to accommodate aftermarket knee braces underneath. Furthermore, with a unisex fit and updated grading, they can now easily accommodate both men and women, facilitating a better fit across various sizes, especially for smaller frames.

Functional features
Making personal items easily accessible, is the reconfigured pocket entrance which now has a V-flap making accessing the pocket easier while sitting down. This combined with a new waistband construction and more breathable fabrics boosts all-day active-riding comfort. And with vibrant neutral hues offered, they add a pop of color to your other DIRT Series collection gear.

Note: We advise women to order a size smaller than they would regularly buy.

Comfort features

Adjustability:
Adjustable waist belt
Pockets:
Two slit pockets on upper legs
Lining:
Soft spacer mesh
Features:
B-lock button closure at front

Full stretch

grip panel at seat

Climate features

Protection features

Protection:
SEESMART CE-level 1 Hip Protectors

SEESMART CE-level 1 Knee Protectors

Soft spacer mesh protector pockets
Outer shell material:
CORDURA® 750D ripstop

Monaco performance cowhide

PWR|Shell rib stretch

Sure grip
Visibility:
Laminated reflective logo on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating.

REV'IT! BARRIER 2 H20 RAIN JACKET - WHITE

$269.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

DIRT Series, lightweight, waterproof zippered, off-road rain jacket

For the times when you’re caught off guard – riding off road - by Mother Nature, the Barrier 2 H2O rain jacket is ready to keep you dry. Upgraded from a smock design in the previous iteration, a redesign based on clear rider feedback, the all-new Barrier 2 H2O is now a center-front zipper jacket design. To offer the same quick-action, on-trail waterproofing prowess, but speeding up the time it takes to slip into when it really comes pouring down fast.

Rainwear for off roaders
With a 3L polyester ripstop outer shell - made to slide over your protective under layers without friction - coupled with 3L hydratex waterproofing, the Barrier 2 H2O jacket’s main goal is to keep you from getting soaked. An easy addition to your modular, DIRT Series kit, it packs easily into your backpack or vest and can be thrown on in a flash. Furthermore, the taped seams use a contrasting color to create the graphic lines – but mainly to keep the water out, while the Aquaguard® front zipper prevents precipitation from entering through the front.

In the details
A hook-and-loop closure is included at the wrists for a better/closer fit, while the snap button helps affix the hood to the jacket while riding, preventing the hood from flapping around profusely. Additionally, the hood drawcords are finished in the cord tunnel so, when pulled tight, also don’t flap around in the wind while at speed.

Note: We advise women to order a size smaller than they would regularly buy.

Comfort features

Adjustability:
Adjustment drawcord at hem

Elasticated waist
Features:
Adjustment drawcord at hood

Button fixation for hood

Fixed hood

Foldable hood

Includes transport bag

YKK AQUASEAL® Front Zipper

Climate features

Waterproofing:
hydratex|3L

Protection features

Outer shell material:
3L polyester ripstop
Visibility:
Laminated reflection at collar

Laminated reflection at upper arms

REV'IT! BARRIER 2 H20 RAIN JACKET - WHITE

REV'IT! VISION H2O JACKET - BLACK-RED

$929.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Waterproof adventure rally jacket with a technical, fit-for-purpose design

Designed for adventure, made to stand out; the Vision H2O jacket perfectly combines Pol Tarrés’ vintage rally-inspired vibe with a technical, fit-for-purpose waterproof jacket design and the #revitrider’s quintessential red, black, and chinchilla colors.

Tackle adventures beyond the horizon
The Vision H2O jacket’s waterproof construction is made with 3L waterproof hydratex and has ample ventilation zippers incorporated where they serve their purpose best – with air intake zippers across the biceps and lower fore arms and exhaust zips vertically from the shoulder blades down. The other of the offroad-ready jackets’ zippers open up to provide pocket space – with another inner pocket, too – to take along the stuff you need to tackle adventures beyond the horizon.

Casual adventure cool
Adding to the adventurous vibe – and completing its versatile character – we’ve added a hood for when you park up and hangout in less-than-ideal conditions. And it adds a definitive air of casual adventure cool.

Pol Tarrés style from every angle
On the technical side of things, the Vision H2O jacket provides CE-level 1 SEESMART impact protection. Thin but effective, the elbow and shoulder guards offer comfort on any ride. Switching from on-road to off-road? Take them out and slip the jacket over your protection vest and head into adventure with a waterproof shell jacket that breathes Pol Tarrés’ style from every angle.

Comfort features

Adjustability:
Adjustment drawcord at hem

Adjustment tab at cuffs
Pockets:
Slit pocket at back

Two inner pockets

Waterproof slit pocket at waist
Features:
Adjustment drawcord at hood

Comfort collar

Detachable hood

YKK AQUASEAL® Front Zipper

Climate features

Waterproofing:
hydratex|3L
Ventilation:
Already in system as: CFZ|VCS Aquadefence

Zipper at upper back

Zippers on lower arms

Zippers on upper arms

Protection features

Protection:
3D mesh protector pockets

Prepared for SEESOFT CE-level 2 Insert Back Protector

Ready for Avertum Tech-Air® airbag system - ONE SIZE UP

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors
Outer shell material:
3L CORDURA® 750D ripstop

PWR|Shell ripstop stretch
Visibility:
Laminated reflection at collar

Laminated reflection on back

Laminated reflection on hood

Laminated reflective logo on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating.

REV'IT! LEJANO PANTS - BLACK-RED

$549.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Comfortably lightweight and durable, in-boot adventure rally pants

A huge compliment to our design and development teams’ efforts, the Lejano pants are close to identical to our revered Peninsula pants, a staple of the DIRT Series. As Pol Tarrés’ go-to pants for his two wheeled antics – or just one when needed – the Peninsula pants were given the Tarres treatment in terms of purpose and looks most of all: meet the Lejano pants.

Active fit, in-boot design
With the Pol Tarrés wheelie emblem, the deep red and black, as well as the large, cut-off REV'IT! graphics, these purpose-built active fit pants are made be tucked into the boot. The way to go for off-road and Pol’s style of choice.

Optimal fit ensured
Highly abrasion-resistant CORDURA® ripstop fabric meets PWR|Shell ripstop stretch on the inside legs, lower legs, and upper knees. This allows for maximum movement and comfort. Softshell 3L inner panels on the lower inside legs provide extra grip and stretch property for comfort when standing on the motorcycle while optimal fit is ensured by the ratchet waist closure while the silicon waistband will keep the pants from sliding down

Pol Tarrés style from every angle
On the technical side of things, the Lejano pants provide CE-level 1 SEESMART impact protection. Thin but effective, the knee and hip guards offer comfort on any ride. Switching from on-road to off-road? Take them out and slip the pants over your knee guards and head into adventure with comfortably lightweight and durable rally pants that breathe Pol Tarrés style from every angle.

Comfort features

Adjustability:
Adjustment strap at waist
Pockets:
Slit pocket at hip
Lining:
COOLMAX® mesh lining
Features:
grip panel at seat

Grip panel at seat

silicon print inside waistband

Stretch at calf

Stretch at crotch

Stretch at knees

Climate features

Ventilation:
Perforated leather

Ventilation zippers on upper legs

Protection features

Protection:
3D mesh protector pockets

SEESMART CE-level 1 Hip Protectors

SEESMART CE-level 1 Knee Protectors
Outer shell material:
4-way stretch

Monaco performance cowhide

Perforated Monaco performance cowhide

PWR|Shell ripstop stretch

Sure grip

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating.

REV'IT! AFRICA JACKET - BLACK-RED

$549.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Extremely breathable, hot weather-ready adventure rally jacket

The adventures Pol Tarrés gets into tend to be extreme. In terms altitude, the cold, and certainly in the heat of the desert – racing the Africa Eco Race at the knife edge. Using Pol’s vast experience in going full-send as input, we’ve designed the fully ventilated Africa jacket. Puristic, straight forward, and ready to tackle the hottest of adventures.

Keep it pinned for longer
Refined yet rugged ballistic mesh meets crucial zones with laser-cut ventilation. Based on comments from Pol, up to 70% of the jacket is made to breathe in fresh air. All to allow for a rally-ready, breathable construction, as well as having super stretchy soft shell and hard-wearing ripstop fabric where it needs to be. A carefully assembled mix of materials that assures you’re kept cool when adventure heats up. To maintain focus and to keep it pinned for longer.

Purposeful ripstop and dark camo mesh
In terms of style, you’re looking at bright red, purposeful looking ripstop and a clear, dark camo print incorporated into the mesh panelling. Meanwhile the jacket is decked out in only the necessary pockets, with a pair above the hips and a chest pocket – with a goggle wipe – up front and one at the lower back. Plus, a practical inner jacket pocket to keep your personals in board.

Pol Tarrés style from every angle
On the technical side of things, the Africa jacket provides CE-level 1 SEESMART impact protection. Thin but effective, the elbow and shoulder guards offer comfort on any ride. Switching from on-road to off-road? Take them out and slip the jacket over your protection vest and head into adventure with an extremely breathable rally jacket that breathes Pol Tarrés style from every angle.

Comfort features

Adjustability:
Adjustment drawcord at hem

elasticated cuff
Pockets:
Hand warmer pockets

Inner pocket

internal chest pocket

Slit pocket at back

Slit pocket at chest

Two lined slit pockets at waist
Features:
Knitted cuff

Stretchable cuff

Stretch at back

Climate features

Ventilation:
Fully ventilated mesh

Perforated textile

Perforation on upper front

Protection features

Protection:
Prepared for SEESOFT CE-level 2 Insert Back Protector

Ready for Avertum Tech-Air® airbag system - ONE SIZE UP

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors

Soft spacer mesh protector pockets
Outer shell material:
Polyester mesh

PWR|Shell stretch
Visibility:
Laminated reflection at collar

Laminated reflection on back

Laminated reflective logo on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating

REV'IT! MOROCCO JACKET - SAND-RED

$439.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Super comfortable, pure off-road, adventure rally jacket

Old-school rally raid vibes and a whole lot of Pol Tarrés cool: Meet the Morocco jacket. An off-road jacket only, the Morocco is dedicated and fit for purpose. And that purpose is sending it off-road in rally-raid adventures and very much looking the part as you go.

A firm dose of vintage-cool style
Developed in close relation with Pol himself, the Morocco jacket was based directly on feedback and input. Taking inspiration from his – very successful – Africa Eco Race rally-raid outings, combined with a firm dose of the Pol’s preferred vintage cool style, this is a rally-raid ready jacket for the masses. The entirely soft-shell stretch front and back offers amazing performance thanks to the 3L lamination of the material and the stretch properties making the Morocco ready for long days standing on the pegs off road. It’s the kind of comfort you need on the edge between grip and slip in the dirt.

For long days standing on the pegs
To that end, the outspoken red-feather grey Morocco jacket is prepared with lots of on-board storage options. Whether you just need a hydrapak on board, or everything up to bars and gels, spare gloves, and even an emergency rain layer, there’s room to rival a backpack.

Purposeful, purely off-road jacket
Mind you, the purposeful design of the Morocco jacket makes it a purely off-road jacket. Intended to be worn with a separate protection vest only, there’s no integrated impact protection. At the same time, the jacket’s CE-rated construction is made to take a beating and boasts a B class safety rating for abrasion.

Comfort features

Adjustability:
Adjustment drawcord at hem
Pockets:
Chest pocket

Inner pocket

internal chest pocket

Slit pocket at back

Two back pockets on back

Two pockets on front
Features:
Comfort collar

Soft edge at collar

Climate features

Ventilation:
Zippers at back

Zippers on chest

Protection features

Protection:
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Outer shell material:
PWR|Shell

ripstop 600D
Visibility:
Laminated reflection at chest

Laminated reflection at upper arms

CERTIFICATION

This garment is certified according to the FprEN 17092 Standard, published in 2020 and has achieved B rating.

REV'IT! TRAZADA SWEATER - SAND-BLACK

$419.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Stretchy and comfortable, Pol Tarrés-inspired riding sweater

A little less in line with Pol Tarres' off-road antics, but fully in tune with his own off-bike style and preferred vibe. Inspired directly by the old-school rally and racing atmosphere the infamous #revitrider loves to embrace, the Trazada sweater breathes life into that casual-cool style with ride-ready sweater with AA safety rating and CE-level 1 SEESMART protection built it. Making it more than just any good-looking Pol Tarres inspired sweater.

More than just a good-looking sweater
Embracing the chinchilla color and stylishly subtle branding and logos, the Trazada sweater is making styling it up look easy. With Pol Tarrés’ signature number 13 boldly displayed on back side and PT icon on the chest, it’s all refined class in this super comfortable, stretchy fabric. Finished off around the collar and sleeves with an additional bit of comfort thanks to careful knitting around the edges.

Combining style and comfort with ease
One for any casual ride where you want to show off you got a bit of Pol Tarrés inspiration in you, the Trazada sweater combines style and comfort with ease. You’re not going to want to take it off.

Comfort features

Adjustability:
None
Pockets:
Slit pocket on sleeve
Lining:
Mesh
Features:
Full stretch

Knitted collar

Knitted cuff

Short connection zipper

Climate features

Protection features

Protection:
Prepared for SEESOFT CE-level 2 Insert Back Protector

Ready for Avertum Tech-Air® airbag system - ONE SIZE UP

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors

Thumb loops
Outer shell material:
Polyester stretch
Visibility:
Laminated reflective logo on back

Laminated reflective logo on chest

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating

REV'IT! THIRTEEN JERSEY - SAND

$189.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Pol Tarrés-inspired, lightweight and active fit, adventure rally jersey

All-out Pol Tarrés style: this is the Thirteen jersey. Named for the #revitrider’s race number and decked out in Pol’s outspoken style and red and black colors, the Thirteen jersey is a statement piece for the trails and rally adventures.

Flexibility that Pol Tarrés needs
Constructed from durable, stretchy, and lightweight Lycra® material, you’re getting the kind of flexibility that Pol Tarrés needs, and you will enjoy it too. Breathable, with the airflow you need to keep cool and comfortable during off-road riding in high temperatures.

Pol Tarrés style from every angle
On the technical side of things, the Thirteen jersey is an overshirt only and does not come with impact protection. Slip the jersey over your protection vest and head into adventure with a comfortably lightweight and durable adventure rally jersey that breathes Pol Tarrés style from every angle.

REV'IT! ESCONDIDO GLOVES - RED

$99.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Super lightweight, feel-ensuring, snug fit adventure rally gloves

Developed directly from Pol Tarrés’ personal REV'IT! gloves of choice, you’re looking at the tough yet super lightweight Escondido gloves. With a stripped-down design cutting the spec sheet down to a comfortably snug neoprene cuff and foam palm padding to assure as much feel as possible, the Escondido gloves are the less is more idiom with a purposeful-looking hook and loop closure.

Pol’s favorites
The graphics are clear hints at Pol’s favorites in terms of colors and designs. With the chinchilla and black version with black cut-off REV'IT! branding and red accents and the red edition with even brighter, white branding, it’s going to be hard to pick your own favorite.

Comfort features

Adjustability:
Stretch at fingers

Stretch at thumb

Stretch fabric on back of hand
Closure:
Hook-and-loop closure

Wrist strap
Features:
Grip patch at palm

Pull tab

Regular cuff

Climate features

Ventilation:
Ventilation holes

Protection features

Protection:
PU rubber palm slider

PWR|Yarn

Temperfoam® palm slider

Temperfoam® thumb knuckle
Outer shell material:
4-way stretch

Connect finger tip fabric

microfiber

microfiber e-touch

Neoprene

PWR|Stretch mesh

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 rating.

REV'IT! ESCONDIDO GLOVES - SAND

$99.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Super lightweight, feel-ensuring, snug fit adventure rally gloves

Developed directly from Pol Tarrés’ personal REV'IT! gloves of choice, you’re looking at the tough yet super lightweight Escondido gloves. With a stripped-down design cutting the spec sheet down to a comfortably snug neoprene cuff and foam palm padding to assure as much feel as possible, the Escondido gloves are the less is more idiom with a purposeful-looking hook and loop closure.

Pol’s favorites
The graphics are clear hints at Pol’s favorites in terms of colors and designs. With the chinchilla and black version with black cut-off REV'IT! branding and red accents and the red edition with even brighter, white branding, it’s going to be hard to pick your own favorite.

Comfort features

Adjustability:
Stretch at fingers

Stretch at thumb

Stretch fabric on back of hand
Closure:
Hook-and-loop closure

Wrist strap
Features:
Grip patch at palm

Pull tab

Regular cuff

Climate features

Ventilation:
Ventilation holes

Protection features

Protection:
PU rubber palm slider

PWR|Yarn

Temperfoam® palm slider

Temperfoam® thumb knuckle
Outer shell material:
4-way stretch

Connect finger tip fabric

microfiber

microfiber e-touch

Neoprene

PWR|Stretch mesh

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 rating.

REV'IT! TACTO GLOVES - RED

$77.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Extremely lightweight, maximum feel-ensuring, snug fit off-road gloves

Developed directly from Pol Tarrés’ personal REV'IT! gloves of choice, you’re looking at the extremely lightweight Escondido gloves, designed specifically for off-road use only. The fully stripped-down design cuts the spec sheet down to a comfortably snug and ultra-thin Lycra® fabric outer and microfiber palm construction, with breathable mesh between the fingers.

Hardcore design: Pol’s choice
This hardcore design allows for the gloves to offer maximum feel on the bars, clutch, and brakes and not much else. That means there’s no knuckle protection or additional padding. Because when bike control is all that matters, Pol’s made his choice. Now you can too. Always with the same note: “Warning, you are not Pol Tarrés!”

Comfort features

Adjustability:
Adjustment tab at cuff
Features:
Grip patch at palm

Pull tab

Short cuff

Climate features

Ventilation:
Fully ventilated fabric

Protection features

Outer shell material:
4-way stretch

microfiber

PU grip

PU (polyurethane) coated fabric

REV'IT! TACTO GLOVES - SAND

$77.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Extremely lightweight, maximum feel-ensuring, snug fit off-road gloves

Developed directly from Pol Tarrés’ personal REV'IT! gloves of choice, you’re looking at the extremely lightweight Escondido gloves, designed specifically for off-road use only. The fully stripped-down design cuts the spec sheet down to a comfortably snug and ultra-thin Lycra® fabric outer and microfiber palm construction, with breathable mesh between the fingers.

Hardcore design: Pol’s choice
This hardcore design allows for the gloves to offer maximum feel on the bars, clutch, and brakes and not much else. That means there’s no knuckle protection or additional padding. Because when bike control is all that matters, Pol’s made his choice. Now you can too. Always with the same note: “Warning, you are not Pol Tarrés!”

Comfort features

Adjustability:
Adjustment tab at cuff
Features:
Grip patch at palm

Pull tab

Short cuff

Climate features

Ventilation:
Fully ventilated fabric

Protection features

Outer shell material:
4-way stretch

microfiber

PU grip

PU (polyurethane) coated fabric

REV'IT! HYDRA 3 H2O LADIES GLOVES - BLACK

$169.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

We understand the importance of keeping your hands protected and functional during colder rides in the city. Emphasis on both protected and functional. That’s why our Hydra 3 H2O Ladies gloves exist.

Stylish safety
The combination of softshell and leather/suede used in the Hydra 3 H2O Ladies gloves gives it not only a fashion-centric aesthetic but also a protective element. Coupled with the new shape of the hardshell knuckle protection, PWR|Shield at the palm, and PU injected finger knuckles, hands are wrapped in a female-specific fit and ample protection.

Protection against the elements
And speaking of protection – in this case, the elements – the Hydra 3 H2O Ladies gloves won’t leave you empty handed. The inclusion of the hydratex z-liner waterproofing construction, along with the tri-fleece liner, and 3M™ Thinsulate™ 100g at the backhand, work symbiotically to wrap hands in a weatherproofing shield. And when it’s raining outside, the suede visor wiper at the sidewall of the thumbs is ready to help you see clearly when drops inevitably land on your visor.

Certification:

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating. For more details about certification click here.

Comfort features:

Adjustability:
Adjustment strap at wrist

Stretch lips at fingers
Closure:
Wrist strap
Lining:
Tri-fleece liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

insulation only at backhand

Knitted cuff

Suede leather visor wiper

Climate features:

Waterproofing:
hydratex|Z-liner
Insulation:
3M™ Thinsulate™ G 100g

Protection features:

Protection:
Hard shell knuckle

Memory foam underneath knuckle protector

OrthoLite® UltraLite comfort foam at palm

PU injected finger knuckles

PWR|Shield at palm
Outer shell material:
goatskin drum dyed with WR finish

Leather Connect Finger Tip

microfiber e-touch

PU (polyurethane) coated fabric

PWR|Shell stretch

Softshell 3L

Suede leather with WR finish
Visibility:
Laminated reflective logo at backhand

Laminated reflective logo at finger

REV'IT! HYDRA 2 LADIES GLOVES SIZE CHART

REV'IT! HYDRA 3 H2O LADIES GLOVES - BLACK

REV'IT! BOUNDLESS H20 BOOTS

$419.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Rugged, waterproof, well-rounded motorcycle touring boots

Touch off and head out: All-weather confidence of boots that will provide you safe passage however far adventure might take you. Waterproof thanks to a hydratex membrane and durable thanks to a transversal plate that adds comfortable amount of stiffness, the Boundless H2O boots are made to blend protection with a balanced air of trail running style.

Call of the outdoors
That mix of ride-ready protection and outdoor hiking cue blends perfectly to create a rugged vibe with a performance-focused appeal. To go above and beyond the call of the outdoors. The same can be said of the combination of its tech-savvy outer. A SEESOFT ankle disc, and a plush, yet comfortable and sturdy inner bootie lined with polyurethane foam. Providing dampening and all-day riding comfort.

Cross boundaries
Simply pull the side-mounted zipper up and close the hook-and-loop flap to secure the puller in place, and you’re ready to mount up. Go and cross boundaries like they were never there with the Boundless H2O boots adding flair and an adventurous flavor to any ride. With assuring waterproofing and safety, and even more comfort.

Comfort features

Closure:
Gusset zipper with protection edge
Features:
Accordion stretch panels

Ortholite® insole Eco-LT Hybrid

PP insole with integrated shank

TPU gear shift pad

Climate features

Waterproofing:
hydratex|Z-liner
Ventilation:
Perforation on side

Protection features

Protection:
Reinforced ankle

Reinforced heel

Reinforced side panel

Reinforced toe

SEESOFT ankle discs
Outer shell material:
Full grain leather

microfiber
Visibility:
Reflection at heel
Sole:
Rubber sole

REV'IT! GRIT GTX BOOTS

$439.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Rugged and waterproof, mid-cut, premium Adventure Sport motorcycle touring boots

Inside out, every element of the premium Grit GTX boots is engineered for the extremes. Like GORE-TEX Performance Comfort – a three-layer 100% waterproof laminate – comprising a quick-drying textile lining, a microporous membrane, and a protective knit. The same goes for the OrthoLite® insoles, providing the perfect platform for comfort, breathability, and a reassuring fit.

More than strong styling
You want boots that make a strong statement, which is then also back it up with performance. Alongside the undeniably clean style of Grit GTX, there’s abrasion-resistant cowhide leather and reinforcement at heels, toes, and shins. These vulnerable areas are armored with a comfortable SEESOFT ankle disc and thermoformed shin guards for an exact, personalized fit.

Prime grip on any surface
There’s a lot for your feet to do when you ride – and split-second timing is critical. So, the exterior of this design of the Grit GTX boots are decked out with motorcycle-specific, all-season innovations. There's a sturdy shift-pad to reduce wear and add resilience at a contact point and specially developed rubber soles, providing prime grip on both the bike’s pegs and any other surface you and the Grit GTX boots might come up against.

Comfort features

Closure:
Gusset zipper with protection edge
Lining:
3D mesh
Features:
Ortholite® insole Eco-LT Hybrid

Rubber gear shift pad

Climate features

Waterproofing:
GORE-TEX membrane Vision 3L

Protection features

Protection:
Reinforced heel

Reinforced toe

Thermoformed shin guard
Outer shell material:
cowhide

Seamless TPU film
Visibility:
Reflection at heel
Sole:
Rubber sole

CERTIFICATION

These boots or shoes are certified according to the EN 13634 Standard, published in 2017 and have achieved level 2 | 1 | 1 | 2 | WR rating.

REV'IT! DREDGE H20 BOOTS

$379.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Outdoor-inspired, waterproof, mid-cut motorcycle boots

Crossing the line between waterproof motorcycle touring boots and rugged, go-anywhere outdoor footwear: The Dredge H2O is a definite best-of-both-world crossover boot for adventurers in the fullest sense of the term. Whether with your soles firmly on the pegs or on good old terra firma, the Dredge H2O boots have got you covered.

Clever technical balance
Quality appeal breathes out of every edge and seam of these mid-cut boots. Made to slip in with ease, only to then wrap the hook-and-loop closures at the ankle and midfoot shut, while the accordion stretch panels front and back put on just enough pressure to be snug, but comfortable. With extra durable and firm PU foam hugging the foot, you’re experiencing the sort of clever technical balance that carries the Dredge H2O all the way.

Outdoor and motorcycling practicality and style
Strategically positioned reflective elements, a handy webbed back puller – to hang them out to dry or to help with slipping in – and a cool finishing touch with the camo design-infused soles, make the Dredge H2O stand out with the best in terms of outdoor and motorcycling practicality and style. So, you can too.

Comfort features

Closure:
Easy entrance pull strap

Hook-and-loop closure
Features:
Ortholite® insole Eco-LT Hybrid

Rubber gear shift pad

Climate features

Waterproofing:
hydratex|Z-liner
Ventilation:
Mesh at toes

Mesh on side

Protection features

Outer shell material:
Full grain leather

Nubuck

Rubber
Visibility:
Reflection at heel
Sole:
Multi-density EVA shock-absorbing midsole

Rubber sole

CERTIFICATION

These boots or shoes are certified according to the EN 13634 Standard, published in 2017 and have achieved level 1 | 1 | 1 | 1 WR rating.

REV'IT! NEPTUNE 3 GTX JACKET - BLACK-DARK GREEN

$1,249.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

GORE-TEX jacket for multi-season adventure touring

GUARANTEED TO KEEP YOU DRY™ promise (GORE TEX)
Multi-season use
Longer length

Suit up with Neptune 3 GTX jacket. Created to help you tackle the elements while you’re exploring your world around you.

Multi-season adventuring
Stay dry when it’s wet thanks to the inclusion of 2L GORE-TEX waterproofing. It not only makes the Neptune 3 GTX stronger in terms of keeping the water out, but more versatile over multiple seasons. Keeping you warm in the inclusion of a detachable thermal liner, which has the extra perk of a high collar for additional coverage and comfort in the cold. When the sun is out and ready to play, and you take the thermal liner out, you’re able to direct ample airflow to the body thanks to our patented VCS|Aquadefence system with the magnetic FidLock® fasteners. Open or close them even with gloves on.

Tailored to you
While the Neptune 3 GTX jacket’s sole purpose in its existence is to keep riders dry and safe, that doesn’t mean we couldn’t add some classy finishing touches to it. For example, the Hypalon design on front and back where the waistband adjustments are gives the Neptune 3 GTX an even a more upscale feel, and the heavy-duty hang strap around back gives it a nice pop of color against a neutral color palette. As for its functional features, you’ll find two large waterproof flap pockets at the front, complete with magnetic closure, to access your small belongings that you carry on you. Around back is also a slit pocket. And a zippered card holder pocket on the left sleeve takes away the need to reach into your bag or backpack to pull out your form of payment.

On the safety front
The Neptune 3 GTX jacket comes with a AA safety rating, along with included SEEFLEX elbow and shoulder protection. It also comes with prepared pockets for both our back protector insert or the divided chest protectors. And no matter where you find the armor, you’ll also find it surrounded by a soft spacer mesh fabric that creates less friction when moving around, which in turn, makes it more comfortable for the wearer.

Comfort features

Adjustability:
Adjustable elbow protection

Adjustment drawcord at hem

Adjustment strap at lower arm

Adjustment strap at waist

Flexisnap at collar
Pockets:
Inner napoleon pocket

Inner pocket within thermal liner

Sleeve pocket

Slit pocket at back

Two waterproof inner pockets

Two waterproof stash pockets at waist
Lining:
3D mesh

Mesh

Soft spacer mesh
Features:
External hang loop

Long connection zipper

Short connection zipper

Climate features

Waterproofing:
2L GORE-TEX fabric
Insulation:
Detachable thermal liner
Ventilation:
Aquadefence panels on chest

Zipper at upper back

Zippers on upper arms

Protection features

Protection:
Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector

Prepared for SEESOFT CE-level 2 Insert Back Protector

Ready for Avertum Tech-Air® airbag system - ONE SIZE UP

SEEFLEX CE-level 2 Elbow Protectors

SEEFLEX CE-level 2 Shoulder Protectors

Soft spacer mesh protector pockets
Outer shell material:
2L nylon 400D GORE-TEX fabric

3D air mesh

Hypalon
Visibility:
Laminated reflection at collar

Laminated reflection at upper arms

Laminated reflection on back

Laminated reflective logo on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! NEPTUNE 3 GTX JACKET - BLACK-DARK GREEN

REV'IT! OFFTRACK 3 H20 JACKET - RED-WHITE

$699.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight and versatile textile all-season adventure jacket

Product description

Adventure is about embracing the unknown, and to do that, versatility is key. Enter the third-generation Offtrack 3 H2O jacket - a true all-season all-rounder. Built with a lightweight three-layer construction, it features a technical outer shell in fresh, rally-inspired colorways, a detachable thermal liner jacket, and an over-and-under hydratex waterproofing jacket.

Climate control built in
Switch between the three layers and tailor your jacket to your needs. With a durable PWR|Shell and PWR|Ripstop outer shell featuring large, easy-action ventilation panels at the front and back, you essentially have built-in climate control - allowing you to tackle high-temperature adventures while staying cool, even when the ride heats up.

Combination of three layers
Whatever combination of the three versatile layers you choose, you can rest assured that you're protected with ventilated, body-hugging CE-level 2 SEEFLEX impact protectors at the shoulders and elbows. The Offtrack 3 H2O is also prepared for additional protection, allowing for the upgrade of a CE-level 2 SEESOFT back protector and CE-level 1 divided chest protectors.

Adventure-ready design
As any adventure-ready jacket should, the Offtrack 3 H2O comes equipped with ample storage. If the waist-mounted stash pockets and the extra-large mesh lower-back pocket aren’t enough, the main jacket offers two additional inner pockets. Even the separately wearable thermal liner jacket has one, as does the hydratex over-and-under waterproofing liner.

Comfort features

Adjustability:
Adjustable elbow protection

Adjustment drawcord at hem

Adjustment tab at collar
Pockets:
Inner pocket within thermal liner

Membrane storage pocket

Stash pocket at waist
Features:
Expansion pleats at back armhole

Over-under wearable hydratex|Lite waterproof liner

Short connection zipper

Climate features

Waterproofing:
Detachable hydratex|Lite 2-in-1 liner
Insulation:
Detachable thermal liner
Ventilation:
Zippers on lower arms

Protection features

Protection:
Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector

Prepared for SEESOFT CE-level 2 Insert Back Protector

SEEFLEX CE-level 2 Elbow Protectors

SEEFLEX CE-level 2 Shoulder Protectors
Outer shell material:
High density polyester 600D

XL Polyester Ripstop 600D
Visibility:
Reflective print at upper arms

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! OFFTRACK 3 H20 JACKET - RED-WHITE

REV'IT! OFFTRACK 3 H20 JACKET - BLUE-BLUE

$699.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight and versatile textile all-season adventure jacket

Product description

Adventure is about embracing the unknown, and to do that, versatility is key. Enter the third-generation Offtrack 3 H2O jacket - a true all-season all-rounder. Built with a lightweight three-layer construction, it features a technical outer shell in fresh, rally-inspired colorways, a detachable thermal liner jacket, and an over-and-under hydratex waterproofing jacket.

Climate control built in
Switch between the three layers and tailor your jacket to your needs. With a durable PWR|Shell and PWR|Ripstop outer shell featuring large, easy-action ventilation panels at the front and back, you essentially have built-in climate control - allowing you to tackle high-temperature adventures while staying cool, even when the ride heats up.

Combination of three layers
Whatever combination of the three versatile layers you choose, you can rest assured that you're protected with ventilated, body-hugging CE-level 2 SEEFLEX impact protectors at the shoulders and elbows. The Offtrack 3 H2O is also prepared for additional protection, allowing for the upgrade of a CE-level 2 SEESOFT back protector and CE-level 1 divided chest protectors.

Adventure-ready design
As any adventure-ready jacket should, the Offtrack 3 H2O comes equipped with ample storage. If the waist-mounted stash pockets and the extra-large mesh lower-back pocket aren’t enough, the main jacket offers two additional inner pockets. Even the separately wearable thermal liner jacket has one, as does the hydratex over-and-under waterproofing liner.

Comfort features

Adjustability:
Adjustable elbow protection

Adjustment drawcord at hem

Adjustment tab at collar
Pockets:
Inner pocket within thermal liner

Membrane storage pocket

Stash pocket at waist
Features:
Expansion pleats at back armhole

Over-under wearable hydratex|Lite waterproof liner

Short connection zipper

Climate features

Waterproofing:
Detachable hydratex|Lite 2-in-1 liner
Insulation:
Detachable thermal liner
Ventilation:
Zippers on lower arms

Protection features

Protection:
Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector

Prepared for SEESOFT CE-level 2 Insert Back Protector

SEEFLEX CE-level 2 Elbow Protectors

SEEFLEX CE-level 2 Shoulder Protectors
Outer shell material:
High density polyester 600D

XL Polyester Ripstop 600D
Visibility:
Reflective print at upper arms

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! OFFTRACK 3 H20 JACKET - BLUE-BLUE

REV'IT! OFFTRACK 3 H20 JACKET - BLUE-SILVER

$699.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight and versatile textile all-season adventure jacket

Product description

Adventure is about embracing the unknown, and to do that, versatility is key. Enter the third-generation Offtrack 3 H2O jacket - a true all-season all-rounder. Built with a lightweight three-layer construction, it features a technical outer shell in fresh, rally-inspired colorways, a detachable thermal liner jacket, and an over-and-under hydratex waterproofing jacket.

Climate control built in
Switch between the three layers and tailor your jacket to your needs. With a durable PWR|Shell and PWR|Ripstop outer shell featuring large, easy-action ventilation panels at the front and back, you essentially have built-in climate control - allowing you to tackle high-temperature adventures while staying cool, even when the ride heats up.

Combination of three layers
Whatever combination of the three versatile layers you choose, you can rest assured that you're protected with ventilated, body-hugging CE-level 2 SEEFLEX impact protectors at the shoulders and elbows. The Offtrack 3 H2O is also prepared for additional protection, allowing for the upgrade of a CE-level 2 SEESOFT back protector and CE-level 1 divided chest protectors.

Adventure-ready design
As any adventure-ready jacket should, the Offtrack 3 H2O comes equipped with ample storage. If the waist-mounted stash pockets and the extra-large mesh lower-back pocket aren’t enough, the main jacket offers two additional inner pockets. Even the separately wearable thermal liner jacket has one, as does the hydratex over-and-under waterproofing liner.

Comfort features

Adjustability:
Adjustable elbow protection

Adjustment drawcord at hem

Adjustment tab at collar
Pockets:
Inner pocket within thermal liner

Membrane storage pocket

Stash pocket at waist
Features:
Expansion pleats at back armhole

Over-under wearable hydratex|Lite waterproof liner

Short connection zipper

Climate features

Waterproofing:
Detachable hydratex|Lite 2-in-1 liner
Insulation:
Detachable thermal liner
Ventilation:
Zippers on lower arms

Protection features

Protection:
Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector

Prepared for SEESOFT CE-level 2 Insert Back Protector

SEEFLEX CE-level 2 Elbow Protectors

SEEFLEX CE-level 2 Shoulder Protectors
Outer shell material:
High density polyester 600D

XL Polyester Ripstop 600D
Visibility:
Reflective print at upper arms

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! OFFTRACK 3 H20 JACKET - BLUE-SILVER

REV'IT! OFFTRACK 3 H20 PANTS - BLACK

$579.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight and versatile textile all-season adventure pants

Product description

Adventure is about embracing the unknown, and to do that, versatility is key. Enter the third-generation Offtrack 3 H2O pants - true all-season all-rounders. Designed with a lightweight three-layer construction, they feature a technical outer shell, a detachable thermal layer, and waterproof hydratex rain pants with over-and-under functionality.

Tailored to your needs
Switch between the three layers and adjust your setup as needed. The durable softshell and ripstop outer shell, combined with ventilation panels at the thighs, provides built-in climate control - ensuring you stay cool when your ride heats up and comfortable in high-temperature adventures.

Safety assured
No matter how you layer up for your ride, you can rest assured that the Offtrack 3 H2O pants keep you protected. They come equipped with ventilated CE-level 2 SEEFLEX knee protection and thin yet flexible CE-level 1 SEESMART hip armor for optimal safety.

Comfortably in control
Wherever your adventure takes you, the Offtrack 3 H2O pants are designed to adapt. Featuring ample hook-and-loop adjustment, they provide the flexibility to be worn over boots without feeling bulky - while also allowing for a snug fit when tucked into off-road boots. Additional thoughtful design elements include a built-in buckled waistband adjustment - for maintained wearing comfort with the rain layer worn on top - and both short and long connection zippers to attach the pants securely to your jacket - keeping you comfortably in control.

Comfort features

Adjustability:
Adjustable waist belt
Features:
Belt loops

Long connection zipper

Over-under wearable hydratex|Lite waterproof liner

Short connection zipper

Climate features

Waterproofing:
Detachable hydratex|Lite 2-in-1 liner

Protection features

Protection:
SEESMART CE-level 1 Hip Protectors
Visibility:
Laminated reflection at calves

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! OFFTRACK 3 H20 PANTS - SILVER-BLACK

$579.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight and versatile textile all-season adventure pants

Product description

Adventure is about embracing the unknown, and to do that, versatility is key. Enter the third-generation Offtrack 3 H2O pants - true all-season all-rounders. Designed with a lightweight three-layer construction, they feature a technical outer shell, a detachable thermal layer, and waterproof hydratex rain pants with over-and-under functionality.

Tailored to your needs
Switch between the three layers and adjust your setup as needed. The durable softshell and ripstop outer shell, combined with ventilation panels at the thighs, provides built-in climate control - ensuring you stay cool when your ride heats up and comfortable in high-temperature adventures.

Safety assured
No matter how you layer up for your ride, you can rest assured that the Offtrack 3 H2O pants keep you protected. They come equipped with ventilated CE-level 2 SEEFLEX knee protection and thin yet flexible CE-level 1 SEESMART hip armor for optimal safety.

Comfortably in control
Wherever your adventure takes you, the Offtrack 3 H2O pants are designed to adapt. Featuring ample hook-and-loop adjustment, they provide the flexibility to be worn over boots without feeling bulky - while also allowing for a snug fit when tucked into off-road boots. Additional thoughtful design elements include a built-in buckled waistband adjustment - for maintained wearing comfort with the rain layer worn on top - and both short and long connection zippers to attach the pants securely to your jacket - keeping you comfortably in control.

Comfort features

Adjustability:
Adjustable waist belt
Features:
Belt loops

Long connection zipper

Over-under wearable hydratex|Lite waterproof liner

Short connection zipper

Climate features

Waterproofing:
Detachable hydratex|Lite 2-in-1 liner

Protection features

Protection:
SEESMART CE-level 1 Hip Protectors
Visibility:
Laminated reflection at calves

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! OFFTRACK 3 H20 PANTS - SILVER-BLACK

REV'IT! OUTBACK 5 H20 JACKET - SILVER-BLACK

$599.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Mid-level, versatile textile all-season adventure touring jacket

Product description

Designed to make serious adventure touring accessible, the Outback textile outfit has been a staple in our lineup for years - ridden around the world since its inception. Sticking with the tried-and-tested three-layer construction - with detachable thermals and hydratex waterproof liner - and now featuring upgraded chest ventilation, the fifth-generation Outback 5 H2O jacket takes its product proposition to the next level.

Speaking of security
Fit adjustment is paramount in any adventure-ready jacket, and the Outback 5 H2O is no exception. From the integrated waist-belt adjuster to buttoned and hook-and-loop tabs at the arms, plus drawcords along the hem, this jacket allows for free and comfortable movement on the bike while ensuring a secure fit. Speaking of security: top-tier CE-level 2 SEEFLEX protectors are integrated at both the shoulders and elbows, with the option to upgrade impact protection with a CE-level 2 SEESOFT back protector and divided SEESOFT (CE-level 1) chest protectors. Additional safety measures include strategically positioned reflective elements to ensure visibility in all conditions.

All the essentials
As expected from a jacket designed for adventures across all terrains and climates, the Outback 5 H2O is packed with storage options. From large, waterproof waist-mounted storage pockets at the front to two internal pockets - three if you count the additional pocket in the thermal liner - you’ll have plenty of space to keep all your essentials close at hand.

Comfort features

Adjustability:
Adjustable elbow protection

Adjustment drawcord at hem

Flexisnap at collar
Pockets:
Back-mounted stash pocket

Two waterproof stash pockets at waist
Features:
Comfort collar

Cuff zipper

Short connection zipper

Climate features

Waterproofing:
Detachable hydratex|G-liner
Insulation:
Detachable thermal liner
Ventilation:
Ventilation panels on chest

Zippers on lower arms

Protection features

Protection:
3D mesh protector pockets

Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector

Prepared for SEESOFT CE-level 2 Insert Back Protector

SEEFLEX CE-level 2 Elbow Protectors

SEEFLEX CE-level 2 Shoulder Protectors

Thumb loops
Outer shell material:
High density polyester 600D

XL Polyester Ripstop 600D
Visibility:
Reflective logo on back

Reflective print at upper arms

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! OUTBACK 5 H20 JACKET - SILVER-BLACK

REV'IT! OUTBACK 5 H20 JACKET - SAND-BLACK

$599.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Mid-level, versatile textile all-season adventure touring jacket

Product description

Designed to make serious adventure touring accessible, the Outback textile outfit has been a staple in our lineup for years - ridden around the world since its inception. Sticking with the tried-and-tested three-layer construction - with detachable thermals and hydratex waterproof liner - and now featuring upgraded chest ventilation, the fifth-generation Outback 5 H2O jacket takes its product proposition to the next level.

Speaking of security
Fit adjustment is paramount in any adventure-ready jacket, and the Outback 5 H2O is no exception. From the integrated waist-belt adjuster to buttoned and hook-and-loop tabs at the arms, plus drawcords along the hem, this jacket allows for free and comfortable movement on the bike while ensuring a secure fit. Speaking of security: top-tier CE-level 2 SEEFLEX protectors are integrated at both the shoulders and elbows, with the option to upgrade impact protection with a CE-level 2 SEESOFT back protector and divided SEESOFT (CE-level 1) chest protectors. Additional safety measures include strategically positioned reflective elements to ensure visibility in all conditions.

All the essentials
As expected from a jacket designed for adventures across all terrains and climates, the Outback 5 H2O is packed with storage options. From large, waterproof waist-mounted storage pockets at the front to two internal pockets - three if you count the additional pocket in the thermal liner - you’ll have plenty of space to keep all your essentials close at hand.

Comfort features

Adjustability:
Adjustable elbow protection

Adjustment drawcord at hem

Flexisnap at collar
Pockets:
Back-mounted stash pocket

Two waterproof stash pockets at waist
Features:
Comfort collar

Cuff zipper

Short connection zipper

Climate features

Waterproofing:
Detachable hydratex|G-liner
Insulation:
Detachable thermal liner
Ventilation:
Ventilation panels on chest

Zippers on lower arms

Protection features

Protection:
3D mesh protector pockets

Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector

Prepared for SEESOFT CE-level 2 Insert Back Protector

SEEFLEX CE-level 2 Elbow Protectors

SEEFLEX CE-level 2 Shoulder Protectors

Thumb loops
Outer shell material:
High density polyester 600D

XL Polyester Ripstop 600D
Visibility:
Reflective logo on back

Reflective print at upper arms

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! OUTBACK 5 H20 JACKET - SAND-BLACK

REV'IT! OUTBACK 5 H20 PANTS - SILVER-BLACK

$479.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Mid-level, versatile, textile all-season adventure touring pants

Product description

Designed to make serious adventure touring accessible, the Outback textile outfit has been a staple in our lineup for years - ridden around the world since its inception. Sticking with a tried-and-tested three-layer construction - including detachable thermal insulation and over-and-under hydratex waterproofing - these fifth-generation Outback 5 H2O pants take performance to the next level with upgraded, diagonally cut drop-down ventilation.

Move freely and comfortably
Fit and adjustability are essential in any adventure-ready pants, and the Outback 5 H2O pants are no exception. Stretch material across the knees and two waist-adjustment buckles ensure a secure yet flexible fit, allowing for unrestricted movement on the bike.

Ready for adventure
As expected from gear built for adventures in all conditions, the Outback 5 H2O pants are equipped with top-tier CE-level 2 SEEFLEX knee protectors and thin yet effective CE-level 1 SEESMART hip protection. Additional safety measures include strategically placed reflective elements to enhance visibility in all lighting conditions - keeping you seen and secure on every ride.

Comfort features

Adjustability:
Adjustable waist belt
Pockets:
Slit pocket at hip
Features:
Belt loops

Short connection zipper

Climate features

Waterproofing:
Detachable hydratex|Lite 2-in-1 liner
Insulation:
Detachable thermal liner

Protection features

Protection:
SEEFLEX CE-level 2 Knee Protectors

SEESMART CE-level 1 Hip Protectors
Outer shell material:
High density polyester 600D

XL Polyester Ripstop 600D
Visibility:
Laminated reflection at calves

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! OUTBACK 5 H20 PANTS - SILVER-BLACK

REV'IT! OUTBACK 5 H20 LADIES JACKET - SILVER-BLACK

$599.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Mid-level, versatile textile all-season adventure touring jacket

Product description

Designed to make serious adventure touring accessible, the Outback textile outfit has been a staple in our lineup for years - ridden around the world since its inception. Sticking with the tried-and-tested three-layer construction - with detachable thermals and hydratex waterproof liner - and now featuring upgraded chest ventilation, the fifth-generation Outback 5 H2O Ladies jacket takes its product proposition to the next level.

Speaking of security
Fit adjustment is paramount in any adventure-ready jacket, and the Outback 5 H2O Ladies is no exception. From the integrated waist-belt adjuster to buttoned and hook-and-loop tabs at the arms, plus drawcords along the hem, this jacket allows for free and comfortable movement on the bike while ensuring a secure fit. Speaking of security: top-tier CE-level 2 SEEFLEX protectors are integrated at both the shoulders and elbows, with the option to upgrade impact protection with a CE-level 2 SEESOFT back protector and divided SEESOFT (CE-level 1) chest protectors. Additional safety measures include strategically positioned reflective elements to ensure visibility in all conditions.

All the essentials
As expected from a jacket designed for adventures across all terrains and climates, the Outback 5 H2O Ladies is packed with storage options. From large, waterproof waist-mounted storage pockets at the front to two internal pockets - three if you count the additional pocket in the thermal liner - you’ll have plenty of space to keep all your essentials close at hand.

Comfort features

Adjustability:
Adjustable elbow protection

Adjustment drawcord at hem

Flexisnap at collar
Pockets:
Back-mounted stash pocket

Two waterproof stash pockets at waist
Features:
Comfort collar

Cuff zipper

Short connection zipper

Climate features

Waterproofing:
Detachable hydratex|G-liner
Insulation:
Detachable thermal liner
Ventilation:
Ventilation panels on chest

Zippers on lower arms

Protection features

Protection:
3D mesh protector pockets

Prepared for SEESOFT CE-level 2 Insert Back Protector

SEEFLEX CE-level 2 Elbow Protectors

SEEFLEX CE-level 2 Shoulder Protectors

Thumb loops
Outer shell material:
High density polyester 600D

XL Polyester Ripstop 600D
Visibility:
Reflective logo on back

Reflective print at upper arms

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

REV'IT! OUTBACK 5 H20 LADIES JACKET - SILVER-BLACK

REV'IT! OUTBACK 5 H20 LADIES PANTS - SILVER-BLACK

$479.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Mid-level, versatile, textile all-season adventure touring pants

Product description

Designed to make serious adventure touring accessible, the Outback textile outfit has been a staple in our lineup for years - ridden around the world since its inception. Sticking with a tried-and-tested three-layer construction - including detachable thermal insulation and over-and-under hydratex waterproofing - these fifth-generation Outback 5 H2O Ladies pants take performance to the next level with upgraded, diagonally cut drop-down ventilation.

Move freely and comfortably
Fit and adjustability are essential in any adventure-ready pants, and the Outback 5 H2O Ladies pants are no exception. Stretch material across the knees and two waist-adjustment buckles ensure a secure yet flexible fit, allowing for unrestricted movement on the bike.

Ready for adventure
As expected from gear built for adventures in all conditions, the Outback 5 H2O Ladies pants are equipped with top-tier CE-level 2 SEEFLEX knee protectors and thin yet effective CE-level 1 SEESMART hip protection. Additional safety measures include strategically placed reflective elements to enhance visibility in all lighting conditions - keeping you seen and secure on every ride.

Comfort features

Adjustability:
Adjustable waist belt
Pockets:
Slit pocket at hip
Features:
Belt loops

Short connection zipper

Climate features

Waterproofing:
Detachable hydratex|Lite 2-in-1 liner
Insulation:
Detachable thermal liner

Protection features

Protection:
SEEFLEX CE-level 2 Knee Protectors

SEESMART CE-level 1 Hip Protectors
Outer shell material:
High density polyester 600D

XL Polyester Ripstop 600D
Visibility:
Laminated reflection at calves

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! OUTBACK 5 H20 LADIES PANTS - SILVER-BLACK

REV'IT! CONVERGENT H20 JACKET - SILVER-BLACK

$499.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Entry-level, versatile textile all-season adventure touring jacket

Product description

Step into the adventure touring scene with the Convergent H2O jacket - offering all the necessary capabilities at a competitive price point, styled with a fresh, rally-inspired aesthetic. With a fixed waterproof hydratex G-liner, detachable thermal liner, and lots of ventilation you’re all set to explore any adventure, whatever the weather.

Balanced selection of essentials
Living up to its name, the Convergent H2O jacket sits at the intersection of functionality and affordability. Built on lessons learned and innovations developed in our top-of-the-range styles, this jacket offers a carefully balanced selection of essential features. From range-topping direct ventilation options - including a large panel behind the front zipper - to practical storage, the Convergent H2O jacket is well-equipped for any journey.

Adventure-ready
Its adventure-ready spec sheet includes fit-adjustment options at the waist, hem, arms, and cuffs, waterproof pockets, a cleverly adjustable collar, and connection options to attach the jacket directly to your pants. Combined with an AA-rated safety construction and our comfortable and flexible CE-level 2 SEEFLEX impact protectors at the shoulders and elbows, the Convergent H2O jacket is built for the road ahead. Further upgrading protection is simple - the jacket is prepared to accommodate our CE-level 2 SEESOFT back protector.

Comfort features

Adjustability:
Adjustment drawcord at hem

Adjustment strap at lower arm

Adjustment tab at lower arm
Pockets:
Chest pocket

Stash pocket at waist

Zip pocket on front
Features:
Comfort collar

Short connection zipper

Soft edge at collar

Two-way Collar Snap Closure System

Climate features

Waterproofing:
Detachable hydratex|mesh G-liner
Insulation:
Detachable thermal liner
Ventilation:
Air outlet on upper back

Direct ventilation at center front for G-liner construction

Protection features

Protection:
Prepared for SEESOFT CE-level 2 Insert Back Protector

SEEFLEX CE-level 2 Elbow Protectors

SEEFLEX CE-level 2 Shoulder Protectors
Outer shell material:
High density polyester 600D

XL Polyester Ripstop 600D
Visibility:
Laminated reflection at upper arms

Reflective logo at chest

Reflective logo on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! CONVERGENT H20 JACKET - SILVER-BLACK

REV'IT! CONVERGENT H20 JACKET - SAND-RED

$499.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Entry-level, versatile textile all-season adventure touring jacket

Product description

Step into the adventure touring scene with the Convergent H2O jacket - offering all the necessary capabilities at a competitive price point, styled with a fresh, rally-inspired aesthetic. With a fixed waterproof hydratex G-liner, detachable thermal liner, and lots of ventilation you’re all set to explore any adventure, whatever the weather.

Balanced selection of essentials
Living up to its name, the Convergent H2O jacket sits at the intersection of functionality and affordability. Built on lessons learned and innovations developed in our top-of-the-range styles, this jacket offers a carefully balanced selection of essential features. From range-topping direct ventilation options - including a large panel behind the front zipper - to practical storage, the Convergent H2O jacket is well-equipped for any journey.

Adventure-ready
Its adventure-ready spec sheet includes fit-adjustment options at the waist, hem, arms, and cuffs, waterproof pockets, a cleverly adjustable collar, and connection options to attach the jacket directly to your pants. Combined with an AA-rated safety construction and our comfortable and flexible CE-level 2 SEEFLEX impact protectors at the shoulders and elbows, the Convergent H2O jacket is built for the road ahead. Further upgrading protection is simple - the jacket is prepared to accommodate our CE-level 2 SEESOFT back protector.

Comfort features

Adjustability:
Adjustment drawcord at hem

Adjustment strap at lower arm

Adjustment tab at lower arm
Pockets:
Chest pocket

Stash pocket at waist

Zip pocket on front
Features:
Comfort collar

Short connection zipper

Soft edge at collar

Two-way Collar Snap Closure System

Climate features

Waterproofing:
Detachable hydratex|mesh G-liner
Insulation:
Detachable thermal liner
Ventilation:
Air outlet on upper back

Direct ventilation at center front for G-liner construction

Protection features

Protection:
Prepared for SEESOFT CE-level 2 Insert Back Protector

SEEFLEX CE-level 2 Elbow Protectors

SEEFLEX CE-level 2 Shoulder Protectors
Outer shell material:
High density polyester 600D

XL Polyester Ripstop 600D
Visibility:
Laminated reflection at upper arms

Reflective logo at chest

Reflective logo on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! CONVERGENT H20 JACKET - SAND-RED

REV'IT! CONVERGENT H20 PANTS - SAND-BLACK

$399.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Entry-level, versatile, textile all-season adventure touring pants

Product description

Simple, effective, and waterproof - the Convergent H2O pants are designed to get you going and keep you going wherever your touring adventure takes you. Featuring a detachable thermal liner, CE-level 2 SEEFLEX knee armor, and CE-level 1 SEESMART hip protection, they are well-equipped for the journey ahead.

Confidence and comfort
Ride with confidence, knowing you have a fixed waterproof hydratex mesh G-liner to keep you dry. Fit-adjustment options at the waist (straps) and bottom hems (hook-and-loop) ensure all-day comfort, while a short connection zipper allows you to secure the Convergent H2O pants to your riding jacket - keeping out the breeze and preventing your lower back from being exposed.

Ready for the ride
The Convergent H2O pants provide everything you need to set off on your journey. Practical features include grip patches to keep you firmly seated, a handy thigh-mounted cargo pocket for essentials, and strategically placed reflective elements to enhance visibility. With all these features, you're ready to go - no matter the weather.

Comfort features

Adjustability:
Adjustment strap at calves
Closure:
zip fly front closure
Pockets:
Slit pocket at waist

Stash pocket on upper leg
Features:
Stretch panel at sides

Zipper and button-closure front

Climate features

Waterproofing:
hydratex|Mesh G-liner

Water repellent
Insulation:
Detachable thermal liner

Protection features

Protection:
3D mesh protector pockets

SEEFLEX CE-level 2 Knee Protectors

SEESMART CE-level 1 Hip Protectors
Outer shell material:
High density polyester 600D

XL Polyester Ripstop 600D
Visibility:
Laminated reflection at calves

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! CONVERGENT H20 PANTS - SAND-BLACK

REV'IT! CONVERGENT H20 LADIES JACKET - RED-BLACK

$499.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Mid-level, versatile textile all-season adventure touring jacket

Product description

Step into the adventure touring scene with the Convergent H2O Ladies jacket - offering all the necessary capabilities at a competitive price point, styled with a fresh, rally-inspired aesthetic. With a fixed waterproof hydratex G-liner, detachable thermal liner, and lots of ventilation you’re all set to explore any adventure, whatever the weather.

Balanced selection of essentials
Living up to its name, the Convergent H2O Ladies jacket sits at the intersection of functionality and affordability. Built on lessons learned and innovations developed in our top-of-the-range styles, this jacket offers a carefully balanced selection of essential features. From range-topping direct ventilation options - including a large panel behind the front zipper - to practical storage, the Convergent H2O Ladies jacket is well-equipped for any journey.

Adventure-ready
Its adventure-ready spec sheet includes fit-adjustment options at the waist, hem, arms, and cuffs, waterproof pockets, a cleverly adjustable collar, and connection options to attach the jacket directly to your pants. Combined with an AA-rated safety construction and our comfortable and flexible CE-level 2 SEEFLEX impact protectors at the shoulders and elbows, the Convergent H2O Ladies jacket is built for the road ahead. Further upgrading protection is simple - the jacket is prepared to accommodate our CE-level 2 SEESOFT back protector.

Comfort features

Adjustability:
Adjustment drawcord at hem

Adjustment strap at lower arm

Adjustment tab at lower arm
Pockets:
Chest pocket

Stash pocket at waist

Zip pocket on front
Features:
Comfort collar

Short connection zipper

Soft edge at collar

Two-way Collar Snap Closure System

Climate features

Waterproofing:
Detachable hydratex|mesh G-liner
Insulation:
Detachable thermal liner
Ventilation:
Air outlet on upper back

Direct ventilation at center front for G-liner construction

Protection features

Protection:
Prepared for SEESOFT CE-level 2 Insert Back Protector

SEEFLEX CE-level 2 Elbow Protectors

SEEFLEX CE-level 2 Shoulder Protectors
Outer shell material:
High density polyester 600D

XL Polyester Ripstop 600D
Visibility:
Laminated reflection at upper arms

Reflective logo at chest

Reflective logo on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

REV'IT! CONVERGENT H20 LADIES JACKET - RED-BLACK

REV'IT! CONVERGENT H20 LADIES PANTS - SILVER-BLACK

$399.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Entry-level, versatile, textile all-season adventure touring pants

Product description

Designed to make serious adventure touring accessible, the Outback textile outfit has been a staple in our lineup for years - ridden around the world since its inception. Sticking with a tried-and-tested three-layer construction - including detachable thermal insulation and over-and-under hydratex waterproofing - these fifth-generation Outback 5 H2O Ladies pants take performance to the next level with upgraded, diagonally cut drop-down ventilation.

Move freely and comfortably
Fit and adjustability are essential in any adventure-ready pants, and the Outback 5 H2O Ladies pants are no exception. Stretch material across the knees and two waist-adjustment buckles ensure a secure yet flexible fit, allowing for unrestricted movement on the bike.

Ready for adventure
As expected from gear built for adventures in all conditions, the Outback 5 H2O Ladies pants are equipped with top-tier CE-level 2 SEEFLEX knee protectors and thin yet effective CE-level 1 SEESMART hip protection. Additional safety measures include strategically placed reflective elements to enhance visibility in all lighting conditions - keeping you seen and secure on every ride.

Comfort features

Adjustability:
Adjustable waist belt
Pockets:
Slit pocket at hip
Features:
Belt loops

Short connection zipper

Climate features

Waterproofing:
Detachable hydratex|Lite 2-in-1 liner
Insulation:
Detachable thermal liner

Protection features

Protection:
SEEFLEX CE-level 2 Knee Protectors

SEESMART CE-level 1 Hip Protectors
Outer shell material:
High density polyester 600D

XL Polyester Ripstop 600D
Visibility:
Laminated reflection at calves

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! CONVERGENT H20 LADIES PANTS - SILVER-BLACK

REV'IT! HIGHCREST H20 LADIES JACKET - SILVER

$419.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Fully ventilated mesh jacket with detachable over-and-under waterproofing

Product description

A go-to choice for riders who seek ride-ready protection without compromising comfort or style - no matter the weather. This is the Highcrest H2O Ladies jacket. Designed to provide the best of both worlds, the Highcrest H2O Ladies features a fully ventilated mesh construction, complemented by a wet-weather-ready hydratex waterproof jacket.

Ready to ride in any weather
The Highcrest H2O Ladies features the over-and-under hydratex waterproofing jacket, which is light and compactable enough to stow away until its needed. This versatility ensures you’re ready to ride, whatever the weather has in store. For added safety, ample reflective material is incorporated into both the mesh base jacket and the rain-ready over-and-under jacket, enhancing visibility in all riding conditions.

Highly adaptable, fully equipped
The AA-rated construction of the jacket is reinforced with CE-level 2 armor. Alongside fully ventilated SEEFLEX protectors at the shoulders and elbows, the already well-equipped and highly adaptable Highcrest H2O Ladies jacket is also prepared for an optional SEESOFT CE-level 2 back protector.

Comfort features

Adjustability:
Adjustment tab at cuffs

Adjustment tab at upper arm
Pockets:
Chest pocket

Two inner pockets

Two slit pockets at waist
Lining:
3D mesh

Mesh

Polyester ripstop
Features:
3L hydratex over jacket

Comfort collar

Jeans loop

Short connection zipper

Soft edge at collar

V-flap at cuff

Zipper and button-closure front

Climate features

Waterproofing:
Detachable hydratex|3L liner
Insulation:
Wind catcher behind front zipper
Ventilation:
Fully ventilated mesh

Protection features

Protection:
Prepared for SEESOFT CE-level 2 Insert Back Protector

Safety seams

SEEFLEX CE-level 2 Elbow Protectors

SEEFLEX CE-level 2 Shoulder Protectors
Outer shell material:
Polyester mesh

Softshell 3L
Visibility:
Laminated reflective logo on back

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

Want to add a back protector to your jacket? Click here to determine which size you'll need and to add to your shopping cart.

REV'IT! HIGHCREST H20 LADIES JACKET - SILVER

REV'IT! ELLISON 2 LADIES LEGGINGS - BLACK

$339.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

High-waisted, flexible, and comfortable ride-ready leggings

Product description

With a high, body-hugging waistband and internal elastic, the Ellison 2 Ladies leggings ensure a secure fit that contours to the body. And when it comes to security, these are fully ride-ready leggings, boasting a class-AA safety rating and CE-level 1 SEESMART impact protection that’s so thin and flexible, you’ll barely notice it’s there.

Truly leggings
It speaks volumes that this second iteration of the Ellison Ladies is no longer called “legging-inspired pants.” We’ve upgraded them to the point where they truly deserve to be called the Ellison 2 Ladies leggings. With improved stretchability in the PWR|Interlock knit material, they provide durable comfort - further enhanced by stretch rib inserts above the knees.

Sleek and streamlined
To ensure you still get all the necessary functionality on the road, we’ve incorporated pockets - two up front, two at the back - and added two small, bartack-reinforced pull loops to make pulling the leggings up effortless and a stylish reflective element along the side seam to assure visibility. Even the connection zipper, which allows you to attach the Ellison 2 Ladies leggings to your jacket, is neatly covered with fabric when not in use, maintaining a sleek and streamlined appearance.

Comfort features

Adjustability:
Adjustable knee protection

Elastic at waistband
Pockets:
Two back pockets on back

Two pockets on front
Features:
Pull loops

Short connection zipper

Stretch lips at knees

Climate features

Protection features

Protection:
Safety seams

SEESMART CE-level 1 Hip Protectors

SEESMART CE-level 1 Knee Protectors
Outer shell material:
PWR|Knit Brushed
Visibility:
Reflection at hem

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

REV'IT! ELLISON 2 LADIES LEGGINGS - BLACK

REV'IT! TALIA LADIES LEGGINGS - BLACK-WHITE

$259.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

High-waisted, flexible, and comfortable ride-ready sport leggings

Product description

The Talia Ladies leggings combine the style of sportswear leggings with the inherently supportive, stretch-infused comfort of activewear - all while incorporating class-A motorcycling safety into their form-fitted silhouette. Bold, sporty graphics add a touch of athletic-inspired style.

Class and a tangible quality feel
With built-in pull loops, the Talia Ladies leggings are easy to slip on, and thanks to the high-rise body-hugging waistband, they stay securely in place - for both comfort and safety. The durable PWR|Interlock knit is soft against the skin and features a subtle shimmer, ensuring not only the all-day wearing comfort that only leggings can provide but also a refined look with a premium-quality feel.

Style and safety kept in check
More than just a fashion statement, the Talia Ladies leggings are designed first and foremost for riding. From the wear-resistant fabric and reflective elements to the barely noticeable CE-level 1 SEESMART protective armor at the knees, both style and safety are kept in check on every ride. For additional impact protection, simply upgrade with optional SEESMART hip protectors.

Comfort features

Adjustability:
Adjustable knee protection

Elastic at waistband

Climate features

Protection features

Protection:
Prepared for SEESMART RV33 CE-level 1 Insert Hip Protectors

Safety seams

SEESMART CE-level 1 Knee Protectors
Outer shell material:
PWR|Knit Brushed
Visibility:
Reflection at hem

CERTIFICATION

This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating.

REV'IT! TALIA LADIES LEGGINGS - BLACK-WHITE

REV'IT! CONVERGENT H20 GLOVES - BLACK

$139.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight and waterproof textile touring gloves

Product description

Designed to reflect simplicity, style, and sophistication - built to offer quality comfort. Featuring a fresh and clean aesthetic, a fully waterproof hydratex Z-liner construction, and a combination of a supple goatskin leather palm and durable polyester fabric, the Convergent H2O gloves provide high levels of comfort at an entry-level price point.

Modern style and versatility
Living up to their name, the Convergent H2O gloves are aimed at the point where modern style converges with waterproof mid-length cuff versatility. Whether on rainy summer days or while traversing mixed-weather, mid-season riding, the Convergent H2O gloves assure ample riding comfort without leaving you wanting for that ever-important handlebar feel - even with a liner as soft as the Convergent H2O gloves have.

Simple and secure
The strong yet incredibly flexible SEESOFT knuckle and OrthoLite® UltraLite impact foam along the palm provide quality feel without weighing you down, while clever features like our touchscreen-ready Connect Finger Tip fabrics and the simple and secure wrist adjustment make life easy - wherever your touring adventure takes you.

Comfort features

Adjustability:
Adjustment strap at wrist

Adjustment tab at cuff

Stretch lips at fingers
Closure:
Hook-and-loop closure

Wrist strap
Lining:
Soft brushed tricot liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Pre-curved fingers

Pull tab

Climate features

Waterproofing:
hydratex|Z-liner

Protection features

Protection:
Memory foam at fingers

OrthoLite® UltraLite comfort foam at palm

PWR|Shield at palm

SEESOFT 3D knuckle
Outer shell material:
goatskin drum dyed with WR finish

microfiber

Polyester

PWR| shell ripstop

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! CONVERGENT H20 GLOVES - SAND-BLACK

$139.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight and waterproof textile touring gloves

Product description

Designed to reflect simplicity, style, and sophistication - built to offer quality comfort. Featuring a fresh and clean aesthetic, a fully waterproof hydratex Z-liner construction, and a combination of a supple goatskin leather palm and durable polyester fabric, the Convergent H2O gloves provide high levels of comfort at an entry-level price point.

Modern style and versatility
Living up to their name, the Convergent H2O gloves are aimed at the point where modern style converges with waterproof mid-length cuff versatility. Whether on rainy summer days or while traversing mixed-weather, mid-season riding, the Convergent H2O gloves assure ample riding comfort without leaving you wanting for that ever-important handlebar feel - even with a liner as soft as the Convergent H2O gloves have.

Simple and secure
The strong yet incredibly flexible SEESOFT knuckle and OrthoLite® UltraLite impact foam along the palm provide quality feel without weighing you down, while clever features like our touchscreen-ready Connect Finger Tip fabrics and the simple and secure wrist adjustment make life easy - wherever your touring adventure takes you.

Comfort features

Adjustability:
Adjustment strap at wrist

Adjustment tab at cuff

Stretch lips at fingers
Closure:
Hook-and-loop closure

Wrist strap
Lining:
Soft brushed tricot liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Pre-curved fingers

Pull tab

Climate features

Waterproofing:
hydratex|Z-liner

Protection features

Protection:
Memory foam at fingers

OrthoLite® UltraLite comfort foam at palm

PWR|Shield at palm

SEESOFT 3D knuckle
Outer shell material:
goatskin drum dyed with WR finish

microfiber

Polyester

PWR| shell ripstop

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! CONVERGENT H20 GLOVES - SAND-BLACK

REV'IT! CONVERGENT H2O LADIES GLOVES - GREY-BLACK

$139.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Lightweight and waterproof women’s textile touring gloves

Product description

Designed to reflect simplicity and sophistication - built to offer quality comfort. Featuring a modern and clean aesthetic, a fully waterproof hydratex Z-liner construction, and a combination of supple goatskin leather and durable polyester fabric, the Convergent H2O Ladies gloves provide high levels of comfort at an entry-level price point.

Modern style and versatility
Living up to their name, the Convergent H2O Ladies gloves are aimed at the point where modern style converges with waterproof mid-length cuff versatility. Whether on rainy summer days or while traversing mixed-weather, mid-season riding, the Convergent H2O Ladies gloves assure ample riding comfort without leaving you wanting for that ever-important handlebar feel.

Simple and secure
The soft yet strong SEESOFT knuckle and OrthoLite® UltraLite impact foam along the palm provide quality feel without weighing you down, while clever features like our touchscreen-ready Connect Finger Tip fabrics and the simple and secure wrist adjustment make life easy - wherever your touring adventure takes you.

Comfort features

Adjustability:
Adjustment strap at wrist

Adjustment tab at cuff

Stretch lips at fingers
Closure:
Hook-and-loop closure

Wrist strap
Lining:
Soft brushed tricot liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Pre-curved fingers

Pull tab

Climate features

Waterproofing:
hydratex|Z-liner

Protection features

Protection:
Memory foam at fingers

OrthoLite® UltraLite comfort foam at palm

PWR|Shield at palm

SEESOFT 3D knuckle
Outer shell material:
goatskin drum dyed with WR finish

microfiber

Polyester

PWR| shell ripstop

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! CONVERGENT H2O LADIES GLOVES - GREY-BLACK

REV'IT! ARGON 3 GLOVES - BLACK-WHITE

$299.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Entry-level, track-ready leather gloves with hard-shell protection

Product description

Providing an accessible, track-ready leather glove with an above-entry-level spec sheet - that’s exactly what the Argon 3 gloves bring. Featuring confidence-inspiring reinforcements exactly where you need them and a combination of supple and durable premium goatskin and cowhide leathers, the Argon 3 gloves provide all the necessary handlebar feel and sport riding comfort.

Performance-focused style
Made to match perfectly with the Argon 3 series suits - and jackets - the gloves breathe the same performance-focused style. The strategically positioned ventilation, the pre-curved glove shape, and the supple SEESOFT-laden hard-shell knuckle guard ensure lasting dexterity and comfort.

Living up to their intent
At the same time, there’s double-layered leather where needed, high-quality seam stitching throughout, and a race-ready finger bridge across the ring and little finger to make sure the Argon 3 gloves live up to their intent in terms of usability and long-lasting durability. The addition of our Connect Finger Tip material - allowing you to use touchscreens - makes it a great sporty road-riding glove as well.

Comfort features

Adjustability:
Adjustment strap at wrist

Adjustment tab at cuff

Stretch lips at fingers

Stretch lips at thumb
Closure:
double cuff closure

Hook-and-loop closure

Wrist strap
Lining:
Tri-fleece liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip patch at palm

Grip patch at thumb

Long cuff

Pre-curved fingers

Climate features

Ventilation:
Perforated leather

Ventilation holes

Protection features

Protection:
Little finger protection bridge

PWR|Yarn

Reinforced finger tips

SEESOFT underneath TPU hard-shell knuckle

Temperfoam® at cuff

Temperfoam® at little finger

Temperfoam® finger knuckles

Temperfoam® palm slider

Temperfoam® thumb knuckle

TPU cuff protector

TPU hard shell finger knuckles

TPU hard shell knuckle

TPU hard shell little finger protector

TPU hard-shell metacarp protector

TPU hard shell thumb protector
Outer shell material:
Artificial Leather

cowhide

Drum-dyed stay soft goatskin leather

Leather Connect Finger Tip

microfiber

Perforated artificial leather

Perforated, drum-dyed stay soft goatskin leather

PU grip

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.

REV'IT! POSITRON GLOVES - BLACK-WHITE

$209.99

NOTE: Due to manufacturer restrictions, this item cannot be shipped to addresses outside of Canada.

Extremely ventilated and highly flexible leather summer gloves for urban sport riders

Product description

Next-level ventilation and high-tech performance appeal come together in our all-new Positron gloves. With a race-derived finger-bridge connection between the little finger and ring finger and a bionic, open-structured SEEFLEX knuckle, the Positron gloves provide unparalleled fit, feel, and ventilation.

Picking up the gauntlet
Offering a sporty leather glove that truly checks all the boxes for ventilation can be a challenge. With the Positron gloves, we’ve gone the extra mile to pick up that gauntlet. Featuring soft and supple perforated goatskin leather and a flexibly comfortable knitted cuff, the Positron glove design molds itself to your hands.

Innovative, sporty appeal
Aided by an all-new, sturdy yet malleable knuckle, these urban sport gloves maintain their flexible character while letting in more cool air than ever before. Based on our proprietary SEEFLEX protective armor, the SEEFLEX 3D Protection knuckle really kicks breathability up a gear. Strategically positioned hard-shell protection elements along the fingers and at the palm finish off the gloves’ overall sporty appeal.

Comfort features

Adjustability:
Adjustment strap at wrist

Stretch lips at fingers

Stretch lips at thumb
Closure:
Wrist strap
Lining:
Tricot liner
Features:
conductive fingertip at index finger

conductive fingertip at thumb

Grip panel at palm

Grip patch at thumb

Knitted cuff

Pre-curved fingers

Pull tab

Climate features

Ventilation:
Perforated leather

Perforated textile

Ventilation holes

Protection features

Protection:
Injected ventilated flex knuckle

Little finger protection bridge

SEEFLEX knuckle

Temperfoam® finger knuckles

Temperfoam® thumb knuckle

TPU hard shell finger knuckles

TPU hard-shell metacarp protector

TPU hard shell thumb protector

Ventilated dual comp protector
Outer shell material:
3D air mesh

Artificial Leather

Connect finger tip fabric

Drum-dyed stay soft goatskin leather

microfiber

microfiber e-touch

Perforated, drum-dyed stay soft goatskin leather

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.