21 products
GOLDTOP '76 CAFE RACER JACKET (CE ARMOURED) - BLACK
Regular price
3.545,00 kr
Goldtop England's '76 Cafe Racer leather motorcycle jacket is quite simply, a timeless piece of café racer riding apparel! Based upon the original Goldtop 1976 Scuftuf design, this jacket features black aniline cowhide, with red suede trim throughout, and Stainless Steel buckles & poppers. This jacket has comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for a Knox back protector (optional upgrade).
Note: sizes 50 and 52 are special order and as such carry an additional $100 charge already included in the price shown as compared to standard sizes.
PRODUCT INFO
- CE "AAA" Approved Protective Garment to EN 17092:2020
- 1.4mm thickness black aniline cowhide leather
- CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
- Optional Knox Micro-lock Compact back protector can be purchased here
- Quilted panels on both the shoulders and elbows
- Industrial grade hand-polished centre zip with AERO pull
- Trademark Goldtop gold quilted lining
- 2 Zipped external pockets and
- 2 Interior chest pockets
- Adjustable cuffs with ball zips
- Stainless Steel adjustable waist buckles and collar snap
- Red suede leather trim inside collar, black suede leather trim inside cuffs and zip guard
- Dropped back
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.
GOLDTOP '76 CAFE RACER JACKET (CE ARMOURED) - BRITISH RACING GREEN
Regular price
3.798,00 kr
Goldtop England's '76 Cafe Racer leather motorcycle jacket is quite simply, a timeless piece of café racer riding apparel! Based upon the original Goldtop 1976 Scuftuf design, this jacket comes hand-waxed, racing green aniline cowhide, with tan suede trim throughout, and Stainless Steel buckles & poppers. This jacket has comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for an optional back protector.
Available in sizes 38" to 52", and as these are hand-waxed jackets, the colour may vary slightly from jacket to jacket! Note: sizes 50 and 52 are special order and as such carry an additional $100 charge already included in the price shown as compared to standard sizes.
PRODUCT INFO
- CE "AAA" Approved Protective Garment to EN 17092:2020
- 1.4mm thickness aniline cowhide leather
- CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
- Optional Knox Micro-lock Compact back protector can be purchased here
- Quilted panels on both the shoulders and elbows
- Industrial grade hand-polished centre zip with AERO pull
- Trademark Goldtop champagne quilted lining
- 2 Zipped external pockets and
- 2 Interior chest pockets
- Adjustable cuffs with ball zips
- Stainless Steel adjustable waist buckles and collar snap
- Suede leather trim inside collar, cuffs and zip guard
- Dropped back
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.
GOLDTOP '76 CAFE RACER JACKET (CE ARMOURED) - MIDNIGHT BLUE - SIZE 42
Regular price
3.798,00 kr
Goldtop England's '76 Cafe Racer leather motorcycle jacket is quite simply, a timeless piece of café racer riding apparel! Based upon the original Goldtop 1976 Scuftuf design, this jacket now comes hand-waxed, midnight blue aniline cowhide, with tan suede trim throughout, and Stainless Steel buckles & poppers. This jacket has comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for an optional back protector.
Available in sizes 38" to 48", and as these are hand-waxed jackets, the colour may vary slightly from jacket to jacket!
PRODUCT INFO
- CE "AAA" Approved Protective Garment to EN 17092:2020
- 1.4mm thickness aniline cowhide leather
- CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
- Optional Knox Micro-lock Compact back protector can be purchased here
- Quilted panels on both the shoulders and elbows
- Industrial grade hand-polished centre zip with AERO pull
- Trademark Goldtop red quilted lining
- 2 Zipped external pockets and
- 2 Interior chest pockets
- Adjustable cuffs with ball zips
- Stainless Steel adjustable waist buckles and collar snap
- Suede leather trim inside collar, cuffs and zip guard
- Dropped back
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.
GOLDTOP '76 CAFE RACER JACKET (CE ARMOURED) - OLIVE GREEN
Regular price
3.798,00 kr
Goldtop England's '76 Cafe Racer leather motorcycle jacket is quite simply, a timeless piece of café racer riding apparel! Based upon the original Goldtop 1976 Scuftuf design, this jacket comes hand-waxed, olive green aniline cowhide, with tan suede trim throughout, and Stainless Steel buckles & poppers. This jacket has comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for an optional back protector.
Available in sizes 38" to 48", and as these are hand-waxed jackets, the colour may vary slightly from jacket to jacket!
PRODUCT INFO
- CE "AAA" Approved Protective Garment to EN 17092:2020
- 1.4mm thickness aniline cowhide leather
- CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
- Optional Knox Micro-lock Compact back protector can be purchased here
- Quilted panels on both the shoulders and elbows
- Industrial grade hand-polished centre zip with AERO pull
- Trademark Goldtop champagne quilted lining
- 2 Zipped external pockets and
- 2 Interior chest pockets
- Adjustable cuffs with ball zips
- Stainless Steel adjustable waist buckles and collar snap
- Suede leather trim inside collar, cuffs and zip guard
- Dropped back
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.
GOLDTOP '76 CAFE RACER JACKET (CE ARMOURED) - WAXED BROWN
Regular price
3.545,00 kr
Goldtop England's '76 Cafe Racer leather motorcycle jacket is quite simply, a timeless piece of café racer riding apparel! Based upon the original Goldtop 1976 Scuftuf design, this jacket now comes hand-waxed, brown aniline cowhide, with brown suede trim throughout, and Stainless Steel buckles & poppers. This jacket has comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for an optional back protector.
Available in sizes 38" to 52", and as these are hand-waxed jackets, the colour may vary slightly from jacket to jacket! Note: sizes 50 and 52 are special order and as such carry an additional $100 charge already included in the price shown as compared to standard sizes.
PRODUCT INFO
- CE "AAA" Approved Protective Garment to EN 17092:2020
- 1.4mm thickness aniline cowhide leather
- CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
- Optional Knox Micro-lock Compact back protector can be purchased here
- Quilted panels on both the shoulders and elbows
- Industrial grade hand-polished centre zip with AERO pull
- Trademark Goldtop gold quilted lining
- 2 Zipped external pockets and
- 2 Interior chest pockets
- Adjustable cuffs with ball zips
- Stainless Steel adjustable waist buckles and collar snap
- Suede leather trim inside collar, cuffs and zip guard
- Dropped back
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.
GOLDTOP BOBBER JACKET (CE ARMOURED) - BLACK
Regular price
3.545,00 kr
Goldtop's Bobber Jacket is a retro, classic 1970s style leather motorcycle jacket revived for modern-day riders. Featuring an asymmetric main zip, this double-breasted jacket provides protection through Knox's state of the art Micro-lock armour. It comes equipped with CE Level 1 armour in the shoulders and elbows and a pocket for an optional back protector. The jacket is manufactured from hand-selected, 1.4mm thick aniline cowhides which have each been hand-waxed, making each finished article unique, with a patina that ages beautifully with both time and wear. The whole jacket is finished by hand with a soft red suede trim inside the collar and cuffs, prestige quality zips throughout, and all additional metalware being made from high-quality polished Stainless Steel.
This jacket boasts a CE "AAA" level of protection, the highest most protective level it could possibly achieve.
Available in sizes 38" to 52". Is your size not currently available on our site? No problem; we do special orders! Contact us at info@strathmoto.com and let us know what you need. Note: sizes 50 and 52 are special order and as such carry an additional $100 charge already included in the price shown as compared to standard sizes.
PRODUCT INFO
- 1.4mm Aniline cowhide leather
- CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
- Optional Knox Micro-lock Compact back protector can be purchased here
- Double-stitched diamond quilting on shoulders and lower back panel
- Traditional off-centre slanted zip
- 1 Exterior vertical breast pocket
- 2 Exterior side pockets with ball zips
- 2 Interior breast pockets
- Single adjustable Stainless Steel waist buckles
- Industrial grade hand-polished centre zip with AERO puller
- Trademark Goldtop gold quilted lining
- Red suede leather trim in collar & cuffs
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.
GOLDTOP BOBBER JACKET (CE ARMOURED) - BRITISH RACING GREEN
Regular price
3.798,00 kr
Goldtop's Bobber Jacket is a retro, classic 1970s style leather motorcycle jacket revived for modern-day riders. Featuring an asymmetric main zip, this double-breasted jacket provides protection through Knox's state of the art Micro-lock armour. It comes equipped with CE Level 1 armour in the shoulders and elbows and a pocket for an optional back protector. The jacket is manufactured from hand-selected, 1.4mm thick aniline cowhides which have each been hand-waxed, making each finished article unique, with a patina that ages beautifully with both time and wear. The whole jacket is finished by hand with a soft tan suede trim, prestige quality zips throughout, and all additional metalware being made from high-quality polished Stainless Steel.
This jacket boasts a CE "AAA" level of protection, the highest most protective level it could possibly achieve.
Available in sizes 38" to 48". Is your size not currently available on our site? No problem; we do special orders! Contact us at info@strathmoto.com and let us know what you need.
PRODUCT INFO
- 1.4mm Aniline cowhide leather
- CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
- Optional Knox Micro-lock Compact back protector can be purchased here
- Double-stitched diamond quilting on shoulders and lower back panel
- Traditional off-centre slanted zip
- 1 Exterior vertical breast pocket
- 2 Exterior side pockets with ball zips
- 2 Interior breast pockets
- Single adjustable Stainless Steel waist buckles
- Industrial grade hand-polished centre zip with AERO puller
- Trademark Goldtop champagne quilted lining
- Tan suede leather trim in collar & cuffs
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.
GOLDTOP BOBBER JACKET (CE ARMOURED) - OXBLOOD
Regular price
3.798,00 kr
Goldtop's Bobber Jacket is a retro, classic 1970s style leather motorcycle jacket revived for modern-day riders. Featuring an asymmetric main zip, this double-breasted jacket provides protection through Knox's state of the art Micro-lock armour. It comes equipped with CE Level 1 armour in the shoulders and elbows and a pocket for an optional back protector. The jacket is manufactured from hand-selected, 1.4mm thick aniline cowhides which have each been hand-waxed, making each finished article unique, with a patina that ages beautifully with both time and wear. The whole jacket is finished by hand with a soft tan suede trim, prestige quality zips throughout, and all additional metalware being made from high-quality polished Stainless Steel.
This jacket boasts a CE "AAA" level of protection, the highest most protective level it could possibly achieve.
Available in sizes 38" to 48". Is your size not currently available on our site? No problem; we do special orders! Contact us at info@strathmoto.com and let us know what you need.
PRODUCT INFO
- 1.4mm Aniline cowhide leather
- CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
- Optional Knox Micro-lock Compact back protector can be purchased here
- Double-stitched diamond quilting on shoulders and lower back panel
- Traditional off-centre slanted zip
- 1 Exterior vertical breast pocket
- 2 Exterior side pockets with ball zips
- 2 Interior breast pockets
- Single adjustable Stainless Steel waist buckles
- Industrial grade hand-polished centre zip with AERO puller
- Trademark Goldtop quilted lining - champagne colour
- Tan suede leather trim in collar & cuffs
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.
GOLDTOP BOBBER JACKET (CE ARMOURED) - WAXED BROWN
Regular price
3.545,00 kr
The Bobber Motorcycle Jacket
Goldtop's Bobber Jacket is a retro, classic 1970s style leather motorcycle jacket revived for modern-day riders. Featuring an asymmetric main zip, this double-breasted jacket provides protection through Knox's state of the art Micro-lock armour. It comes equipped with CE Level 1 armour in the shoulders and elbows and a pocket for an optional back protector. The jacket is manufactured from hand-selected, 1.4mm thick aniline cowhides which have each been hand-waxed, making each finished article unique, with a patina that ages beautifully with both time and wear. The whole jacket is finished by hand with a soft tan suede trim, prestige quality zips throughout, and all additional metalware being made from high-quality polished Stainless Steel.
This jacket boasts a CE "AAA" level of protection, the highest most protective level it could possibly achieve.
Available in sizes 38" to 52". Is your size not currently available on our site? No problem; we do special orders! Contact us at info@strathmoto.com and let us know what you need. Note: sizes 50 and 52 are special order and as such carry an additional $100 charge already included in the price shown as compared to standard sizes.
PRODUCT INFO
- 1.4mm Aniline cowhide leather
- CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
- Optional Knox Micro-lock Compact back protector can be purchased here
- Double-stitched diamond quilting on shoulders and lower back panel
- Traditional off-centre slanted zip
- 1 Exterior vertical breast pocket
- 2 Exterior side pockets with ball zips
- 2 Interior breast pockets
- Single adjustable Stainless Steel waist buckles
- Industrial grade hand-polished centre zip with AERO puller
- Trademark Goldtop gold quilted lining
- Brown suede leather trim inside collar, cuffs, and zip guard
- Dropped back
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.
GOLDTOP FLAT TRACKER JACKET (CE ARMOURED) - BLACK
Regular price
3.545,00 kr
Goldtop England's Flat Tracker Jacket has us wanting to get sideways! A jacket for modern-day riders who appreciate a subtle nod to the more traditional designs of the 1960s and 1970s! Beautifully crafted from 1.4mm Aniline Cowhide with diamond double stitching, all hand finished with traditional ball zips, Stainless Steel fastenings, and a red suede collar and cuffs. This jacket comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for a Knox back protector (optional upgrade).
PRODUCT INFO
- 1.4mm thickness black aniline cowhide leather
- CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
- Optional Knox Micro-lock Compact back protector can be purchased here
- Double-stitched quilting across the collar and shoulders
- Industrial grade hand-polished centre zip with AERO pull
- Trademark Goldtop gold quilted lining
- 4 Zipped external pockets
- 2 Interior chest pockets
- Adjustable cuffs with ball zips
- Stainless Steel adjustable waist buckles and collar snap
- Red suede leather trim inside collar, black suede leather trim inside cuffs and zip guard
- Dropped back
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.
GOLDTOP LANCER JACKET (CE ARMOURED) - BLACK - SIZE 42 - LAST ONE!
Regular price
2.786,00 kr
Say hello to the Lancer, Goldtop's latest jacket, based upon the original Goldtop Scuftuf 75 Motorcycle Jacket. A jacket for modern-day riders who appreciate a subtle nod to the more traditional designs of the 1960s and 1970s!
This jacket has been specifically manufactured from only hand-selected 1.4 mm thick, black aniline cowhides, styled with an asymmetric zip with top protector flap, and has been finished by hand with a tan suede trim, blue satin lining, and the traditional ball zips you can come to expect from Goldtop jackets.
FEATURES
- 1.4mm thickness black aniline cowhide leather
- CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
- Optional Knox Micro-lock Compact back protector can be purchased here
- Industrial grade hand-polished asymmetric zip with AERO pull
- Blue quilted lining
- 3 Zipped external pockets
- 2 Interior chest pockets
- Adjustable cuffs with ball zips
- Stainless Steel collar snap and top zip cover
- Brown suede leather trim inside collar and a black suede leather trim inside cuffs
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.
GOLDTOP LANCER JACKET (CE ARMOURED) - WAXED BROWN - SIZE 40 - LAST ONE!
Regular price
2.532,00 kr
Say hello to the Lancer, Goldtop's latest jacket, based upon the original Goldtop Scuftuf 75 Motorcycle Jacket. A jacket for modern-day riders who appreciate a subtle nod to the more traditional designs of the 1960s and 1970s!
This jacket has been specifically manufactured from only hand-selected 1.4 mm thick, aniline cowhides, styled with an asymmetric zip with top protector flap, and has been finished by hand with a tan suede trim, gold satin lining, and the traditional ball zips you can come to expect from Goldtop jackets.
FEATURES
- 1.4mm thickness aniline cowhide leather
- CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
- Optional Knox Micro-lock Compact back protector can be purchased here
- Industrial grade hand-polished asymmetric zip with AERO pull
- Gold quilted lining. Note: picture shows a red-quilted lining but it's actually a gold lining similar to the waxed brown '76 cafe jacket
- 3 Zipped external pockets
- 2 Interior chest pockets
- Adjustable cuffs with ball zips
- Stainless Steel collar snap and top zip cover
- Brown suede leather trim inside collar and a black suede leather trim inside cuffs
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.
GOLDTOP LADIES BOBBER JACKET (CE ARMOURED) - BLACK - SIZE 12 - LAST ONE!
Regular price
3.545,00 kr
The Goldtop Ladies Bobber Motorcycle Jacket - Black
Designed to look good and feel great both on and off of the bike, this CE "AAA" approved (EN 17092:2020) women's leather biker jacket comes fitted with Knox Microlock protectors in the elbows and shoulders, and a pocket for an optional Knox back protector.
Manufactured from premium 1.3 mm Aniline Cowhide, finished with prestige quality zips and stainless steel fittings throughout, this jacket is soft to the touch, yet has been built to last, with the uncompromising quality of both materials and construction. This is an understated and classic double-breasted style of ladies biker jacket, and noticeable detailing includes double-stitched diamond-quilted panels, and elasticated ribbing and side buckles for both comfort and fit.
Lined with champagne gold satin lining and a butter-soft tan suede trim.
Available in sizes UK 6 to UK 16. If we don't have it in stock, email us at info@strathmoto.com to inquire about placing a special order for you.
PRODUCT INFO
- CE "AAA" Approved Protective Garment to EN 17092:2020
- 1.3mm thickness Racing Green aniline cowhide leather
- CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
- Pocket for an optional CE Level 2 Knox Micro-lock back protector, which can be purchased separately here.
- Double stitched diamond quilting on the shoulders and lower back panel
- Elasticated ribbing side panels for comfort and fit
- Industrial grade hand-polished asymmetric zip with AERO pull
- Trademark Goldtop "Ladies" gold quilted lining
- 3 Zipped external pockets and
- 2 Interior chest pockets
- Adjustable cuffs with ball zips
- Stainless Steel adjustable waist buckles and collar snap
- Tan suede leather trim inside collar and black suede leather trim inside cuffs and zip guard
- Dropped back
The best way to determine your size, would be to go off the measurements that are given in the table below in centimetres (CM). These measurements have been taken with the jacket laid flat and are typically the most accurate to go off of. When comparing these measurements to an existing jacket that you own, please take into consideration the thickness of Goldtop leather and linings.
Please remember that this is only a guide! If in doubt, please go up a size.
To take your own measurements, first measure around your bust at the fullest part, then your waist around the natural waistline. Finally measure around your hips, typically 20cm below your natural waistline. Please take all measurements in inches.
GOLDTOP LADIES BOBBER JACKET (CE ARMOURED) - BURGUNDY - SIZE 10 - LAST ONE!
Regular price
3.545,00 kr
The Goldtop Ladies Bobber Motorcycle Jacket - Burgundy
Designed to look good and feel great both on and off of the bike, this CE "AAA" approved (EN 17092:2020) women's leather biker jacket comes fitted with Knox Microlock protectors in the elbows and shoulders as standard, with a pocket for an optional Knox back protector.
Manufactured from premium 1.3 mm Aniline Cowhide, finished with prestige quality zips and stainless steel fittings throughout, this jacket is soft to the touch, yet has been built to last, with the uncompromising quality of both materials and construction.
This is an understated and classic double-breasted style of ladies biker jacket, and noticeable detailing includes double-stitched diamond-quilted panels, and elasticated ribbing and side buckles for both comfort and fit.
Lined with champagne gold satin lining and a butter-soft ruby suede trim.
Available in sizes UK 6 to UK 16. If we don't have it in stock, contact us at info@strathmoto.com to inquire about placing a special order for you.
PRODUCT INFO
- CE "AAA" Approved Protective Garment to EN 17092:2020
- 1.3mm thickness Racing Green aniline cowhide leather
- CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
- Pocket for an optional CE Level 2 Knox Micro-lock back protector, which can be purchased separately here.
- Double stitched diamond quilting on the shoulders and lower back panel
- Elasticated ribbing side panels for comfort and fit
- Industrial grade hand-polished asymmetric zip with AERO pull
- Trademark Goldtop "Ladies" gold quilted lining
- 3 Zipped external pockets and
- 2 Interior chest pockets
- Adjustable cuffs with ball zips
- Stainless Steel adjustable waist buckles and collar snap
- Tan suede leather trim inside collar and black suede leather trim inside cuffs and zip guard
- Dropped back
The best way to determine your size, would be to go off the measurements that are given in the table below in centimetres (CM). These measurements have been taken with the jacket laid flat and are typically the most accurate to go off of. When comparing these measurements to an existing jacket that you own, please take into consideration the thickness of Goldtop leather and linings.
Please remember that this is only a guide! If in doubt, please go up a size.
To take your own measurements, first measure around your bust at the fullest part, then your waist around the natural waistline. Finally measure around your hips, typically 20cm below your natural waistline. Please take all measurements in inches.
GOLDTOP 617 JACKET (CE ARMOURED) - BLACK
Regular price
3.545,00 kr
A classic reborn. The 617 brando style leather motorcycle jacket is a timeless rocker and biker classic. Originally released in 1970, this classic leather motorcycle jacket is a staple for any rockers and bikers looking for a traditional design made to exacting modern day standards.
PRODUCT INFO
- 1.4mm Aniline cowhide leather with a single hide used for back panel
- CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
- Optional Knox Micro-lock Compact back protector can be purchased here
- Traditional 1960's Brando style collar
- Industrial grade hand-polished asymmetric zip with AERO pull
- Trademark Goldtop gold quilted lining
- 5 Zipped external pockets including one on the upper left sleeve
- 2 Interior chest pockets
- Single adjustable waist buckles
- Adjustable cuffs with ball zips
- Stainless Steel adjustable waist buckles and collar snaps
- Black suede leather trim inside cuffs
Technical Specifications
Certification Level: CE AAA
Leather Type: Vegetable Tanned Semi-Aniline Cowhide Leather
Leather Thickness: 1.4mm
Inner Material: Polyester Twill
Buckles: Stainless Steel
Press Studs: Stainless Steel
Armour Pockets: Elbow/Shoulder/Back (all removable)
Note: size 50/52 are special order and therefore incur an extra $90 charge already included in the price.
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.
Customer Reviews
Based on 1 review
Write a review
GOLDTOP 1958 JACKET - WAXED BROWN (CE ARMOURED)
Regular price
3.545,00 kr
Timeless has a name: meet The 1958 Jacket. If you're looking for a jacket that doesn't scream "motorcycle jacket" and can double up as something you regularly wear out and about round town, this is it. As with all Goldtop jackets it's top-of-the-line CE "AAA" certified for the ultimate abrasion resistance. This jacket comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for a Knox Microlock Compact Back protector (optional upgrade).
PRODUCT INFO
- CE "AAA" Approved Protective Garment to EN 17092:2020
- 1.4mm thickness aniline cowhide leather
- CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard, with a pocket for an optional CE Level 2 Knox Micro-lock Compact back protector that can be purchased here. Note: You have the option to upgrade from the standard level 1 Knox elbow and shoulder armour to the new Knox Microlock Compact L2 Shoulder and Elbow armour set. Click here to purchase the upgrade.
- Traditional 1950's American style collar
- Industrial grade hand-polished centre zip with AERO pull
- Trademark Goldtop gold quilted lining
- 2 External pockets
- 2 Interior chest pockets
- Adjustable cuffs with ball zips
- Stainless Steel adjustable waist buckles
- Black suede leather trim inside cuffs
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.
GOLDTOP '72 EASY RIDER JACKET
Regular price
3.798,00 kr
Goldtop England's '72 Easy Rider Jacket recalls the chopper movement of the 70's and is inspired by the classic film, Easy Rider where Peter Fonda's character, Wyatt (a.k.a. "Captain America"), wears a badass black leather jacket with racing stripes. This jacket was also worn by Tom Hardy in "Venom: Let There be Carnage".
This is a jacket for modern-day riders who appreciate a subtle nod to the classic designs of the 1970s! Beautifully crafted from 1.4mm Aniline Cowhide, all hand finished with traditional ball zips, Stainless Steel fastenings, and a tan suede collar and black suede cuffs. This jacket comes with removable Knox Microlock elbow & shoulder armour, and also has a pocket for a Knox back protector (optional upgrade).
PRODUCT INFO
- CE "AAA" Approved Protective Garment to EN 17092:2020
- 1.4mm thickness black aniline cowhide leather
- CE Level 1 Knox Micro-lock elbow and shoulder armour included as standard. You may also wish to upgrade to the NEW CE level 2 Knox Micro-lock Compact shoulder and elbow armour which can be purchased separately here.
- Optional Knox Micro-lock Compact back protector can be purchased here
- Industrial grade hand-polished centre zip with AERO pull
- Blue quilted lining
- 3 Zipped external pockets
- 2 Interior chest pockets
- Adjustable cuffs with ball zips
- Stainless Steel adjustable waist buckles and collar snap
- Tan suede leather trim inside collar
- Black suede leather trim inside cuffs and zip guard
- Dropped back
To calculate your size, first measure around your chest at the widest point in inches, and that will indicate which size to go for. If you are slightly over a certain size (for example a 44.5" rather than a 44"), or plan to wear the jacket with a sweater underneath, we would always recommend upsizing. Below is a rough guide to our jacket sizing for each size, which are all based on the same general fit. All sizes below are in inches.
