Helmets

SPECIFICATIONS

• X-MATRIX Shell (multiaxial fiberglass, 3D organic fibers, special aramid fibers and carbon reinforcement)
• DOT FMVSS 218
• Weight: 1400gr Street Version and 1500gr Dual Version
• Pinlock ready
• X.MART DRY fabrics
• Emergency Strap V2
• Double D-Ring buckle
• Panoramic Eye Port
• 3D Lining and Cheek pads
• Prepared for X-COM – NEXX Intercom system
• 80% Tint Inner Sun visor
• PC Lexan Shield Clear with Anti-Fog position and Super Lock
• X-Block Quick Release System
• Visor with recessed cavity for pinlock
• Chin Wind stopper
• Night vision - reflectors
• Chin Ventilation
• Air Dynamic System - 3 inlets and 4 outlets air-vents
• Aerodynamic Shell & Rim
• Ergo Padding System
• Peak Extensor
• Action Camera Support top and sides
• Prepared for Quick Strap
• Special Chin Shape to reduce breast injury risk from frontal impacts

• AVAILABLE SIZES
• 3 SHELL SIZES - XS - S | M - L | XL - XXXL

SPECIFICATIONS

• X-MATRIX Shell (multiaxial fiberglass, 3D organic fibers, special aramid fibers and carbon reinforcement)
• DOT FMVSS 218
• Weight: 1400gr Street Version and 1500gr Dual Version
• Pinlock ready
• X.MART DRY fabrics
• Emergency Strap V2
• Double D-Ring buckle
• Panoramic Eye Port
• 3D Lining and Cheek pads
• Prepared for X-COM – NEXX Intercom system
• 80% Tint Inner Sun visor
• PC Lexan Shield Clear with Anti-Fog position and Super Lock
• X-Block Quick Release System
• Visor with recessed cavity for pinlock
• Chin Wind stopper
• Night vision - reflectors
• Chin Ventilation
• Air Dynamic System - 3 inlets and 4 outlets air-vents
• Aerodynamic Shell & Rim
• Ergo Padding System
• Peak Extensor
• Action Camera Support top and sides
• Prepared for Quick Strap
• Special Chin Shape to reduce breast injury risk from frontal impacts

• AVAILABLE SIZES
• 3 SHELL SIZES - XS - S | M - L | XL - XXXL

SPECIFICATIONS

• Carbon Fiber Shell (Carbon Zero version)
• Shell Sizes: 3 (XS-S | M-L | XL-XXXL);- Aerodynamic design, developed to minimize fatigue on long trips, with the mask closed or open
• Morfofit –ergonomic fitting of the cheek pads- Easy to operate mask button and with involuntarily opening safety mechanism
• 360º Super Locker with double pivot for maximum mask safety
  when raised
• Special developed rubber sealing around the mask and the shield
  for optimum Acoustic Isolation
• PC Lexan Shield Clear with Anti-Fog position and central lock
• X-SWIFT Quick Release visor mechanism
• Visor with recessed cavity for Pinlock
• Panoramic Eye Port
• Integrated Sun Visor with Ergonomic Button Mechanism
• Micro-Metric buckle stainless steel
• Night vision – reflectors on the side, front and back of the helmet
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Easy Fit for spectacles Wear
• Adjustable Chin Wind stopper
• Aerodynamic Shell and Trim
• Air Dynamic System - 1 inlet and 2 outlets air-vents
• Chin ventilation
• Removable Breath Guard
• NEXX X.COM 2 Intercom system prepared, with “Plug&Play” easy setup
• Removable Action Camera support on top and side
• Double homologation Full Face and Jet (P/J)
• Weight: Carbon: 1550 grs +/- 50 grs | Fiber: 1625 grs +/- 50 grs
  Available sizes: XS to XXXL
  Homologation: DOT FMVSS 218  (ECE/22-05 COMPLIANT)

SPECIFICATIONS

• Carbon Fiber Shell (Carbon Zero version)
• Shell Sizes: 3 (XS-S | M-L | XL-XXXL);- Aerodynamic design, developed to minimize fatigue on long trips, with the mask closed or open
• Morfofit –ergonomic fitting of the cheek pads- Easy to operate mask button and with involuntarily opening safety mechanism
• 360º Super Locker with double pivot for maximum mask safety
  when raised
• Special developed rubber sealing around the mask and the shield
  for optimum Acoustic Isolation
• PC Lexan Shield Clear with Anti-Fog position and central lock
• X-SWIFT Quick Release visor mechanism
• Visor with recessed cavity for Pinlock
• Panoramic Eye Port
• Integrated Sun Visor with Ergonomic Button Mechanism
• Micro-Metric buckle stainless steel
• Night vision – reflectors on the side, front and back of the helmet
• X.MART DRY Fabrics
• Soft anti-sweat and anti-allergic fabric inner lining
• 3D Formed Pad, removable and washable
• Easy Fit for spectacles Wear
• Adjustable Chin Wind stopper
• Aerodynamic Shell and Trim
• Air Dynamic System - 1 inlet and 2 outlets air-vents
• Chin ventilation
• Removable Breath Guard
• NEXX X.COM 2 Intercom system prepared, with “Plug&Play” easy setup
• Removable Action Camera support on top and side
• Double homologation Full Face and Jet (P/J)
• Weight: Carbon: 1550 grs +/- 50 grs | Fiber: 1625 grs +/- 50 grs
  Available sizes: XS to XXXL
  Homologation: DOT FMVSS 218  (ECE/22-05 COMPLIANT)

SPECIFICATIONS

• X-MATRIX Shell (multiaxial fiberglass, 3D organic fibers, special aramid fibers and carbon reinforcement)
• DOT FMVSS 218 (ECE/22-05 COMPLIANT)
  
• X.MART DRY fabrics
• Removable lining 
• Peak with 2 positions Set Up
• Double-D ring buckle
• Top Ventilation
• Chin Ventilation
• Ergo Padding System
• Weight: 1200grs + - 50grs

AVAILABLE SIZES

• 2 SHELL SIZES - XS - M  |  L-XXL

SPECIFICATIONS

• X-MATRIX Shell (multiaxial fiberglass, 3D organic fibers, special aramid fibers and carbon reinforcement)
• DOT FMVSS 218 (ECE/22-05 COMPLIANT)
  
• X.MART DRY fabrics
• Removable lining 
• Peak with 2 positions Set Up
• Double-D ring buckle
• Top Ventilation
• Chin Ventilation
• Ergo Padding System
• Weight: 1200grs + - 50grs

AVAILABLE SIZES

• 2 SHELL SIZES - XS - M  |  L-XXL

SPECIFICATIONS

• X-MATRIX Shell (multiaxial fiberglass, 3D organic fibers, special aramid fibers and carbon reinforcement)
• DOT FMVSS 218 (ECE/22-05 COMPLIANT)
  
• X.MART DRY fabrics
• Removable lining 
• Peak with 2 positions Set Up
• Double-D ring buckle
• Top Ventilation
• Chin Ventilation
• Ergo Padding System
• Weight: 1200grs + - 50grs

AVAILABLE SIZES

• 2 SHELL SIZES - XS - M  |  L-XXL

SPECIFICATIONS

• X-MATRIX Shell (multiaxial fiberglass, 3D organic fibers, special aramid fibers and carbon reinforcement)
• DOT FMVSS 218 (ECE/22-05 COMPLIANT)
  
• X.MART DRY fabrics
• Removable lining 
• Peak with 2 positions Set Up
• Double-D ring buckle
• Top Ventilation
• Chin Ventilation
• Ergo Padding System
• Weight: 1200grs + - 50grs

AVAILABLE SIZES

• 2 SHELL SIZES - XS - M  |  L-XXL

SPECIFICATIONS

• Carbon Fiber
• DOT FMVSS 218
• X.MART DRY fabrics
• Removable lining 
• Chin Wind stopper
• Double-D ring buckle
• Rotative Clear Shield a prepared for Anti Fog Lens
• Chin Ventilation
• Ergo Padding System
• Weight: 1200grs + - 50grs
• Includes 80% Tint shield! 

AVAILABLE SIZES

• 2 SHELL SIZES - XS - M  |  L-XXL

SPECIFICATIONS

• X-MATRIX Shell (multiaxial fiberglass, 3D organic fibers, special aramid fibers and carbon reinforcement)
• DOT FMVSS 218
• X.MART DRY fabrics
• Removable lining 
• Chin Wind stopper
• Double-D ring buckle
• Rotative Clear Shield, prepared for Anti Fog Lens
• Chin Ventilation
• Ergo Padding System
• Weight: 1200grs + - 50grs

AVAILABLE SIZES

• 2 SHELL SIZES - XS - M  |  L-XXL

SPECIFICATIONS

• X-MATRIX Shell (multiaxial fiberglass, 3D organic fibers, special aramid fibers and carbon reinforcement)
• DOT FMVSS 218
• X.MART DRY fabrics
• Removable lining 
• Chin Wind stopper
• Double-D ring buckle
• Rotative Clear Shield, prepared for Anti Fog Lens
• Chin Ventilation
• Ergo Padding System
• Weight: 1200grs + - 50grs

AVAILABLE SIZES

• 2 SHELL SIZES - XS - M  |  L-XXL

SPECIFICATIONS

• X-MATRIX Shell (multiaxial fiberglass, 3D organic fibers, special aramid fibers and carbon reinforcement)
• DOT FMVSS 218
• X.MART DRY fabrics
• Removable lining 
• Chin Wind stopper
• Double-D ring buckle
• Rotative Clear Shield, prepared for Anti Fog Lens
• Chin Ventilation
• Ergo Padding System
• Weight: 1200grs + - 50grs

AVAILABLE SIZES

• 2 SHELL SIZES - XS - M  |  L-XXL

SPECIFICATIONS

• X-MATRIX Shell (multiaxial fiberglass, 3D organic fibers, special aramid fibers and carbon reinforcement)
• DOT FMVSS 218
• X.MART DRY fabrics
• Removable lining 
• Chin Wind stopper
• Double-D ring buckle
• Rotative Clear Shield, prepared for Anti Fog Lens
• Chin Ventilation
• Ergo Padding System
• Weight: 1200grs + - 50grs

AVAILABLE SIZES

• 2 SHELL SIZES - XS - M  |  L-XXL

SPECIFICATIONS

• Carbon Fiber
• DOT FMVSS 218
• X.MART DRY fabrics
• Removable lining 
• Chin Wind stopper
• Double-D ring buckle
• Rotative Clear Shield, prepared for Anti Fog Lens
• Chin Ventilation
• Ergo Padding System
• Weight: 1200grs + - 50grs

AVAILABLE SIZES

• 2 SHELL SIZES - XS - M  |  L-XXL

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its fabulous inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet a fashionable and stylish accessory with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature, never close heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner hand wash using a towel then permit to air dry whenever it's possible to attenuate heat damage.

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its fabulous inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet a fashionable and stylish accessory with an original design. Each model has its own personality with cool custom paints.

The Oro Collection takes the Vintage line up and kicks it up a few notches incorporating a carbon kevlar shell, Italian leather and alcantara. It is the result of the perfect union of the best Italian leather and DMD craftsmen’s skilled hands.

TECHNICAL DETAILS:

• Carbon Kevlar shell
• The shell is completely covered by Italian leather trim
• The inner liner is made of Italian leather and alcantara and is removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature, never close heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner hand wash using a towel then permit to air dry whenever it's possible to attenuate heat damage.

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its fabulous inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet a fashionable and stylish accessory with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature, never close heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner hand wash using a towel then permit to air dry whenever it's possible to attenuate heat damage.

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its fabulous inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet a fashionable and stylish accessory with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature, never close heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner hand wash using a towel then permit to air dry whenever it's possible to attenuate heat damage.

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its fabulous inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet a fashionable and stylish accessory with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature, never close heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner hand wash using a towel then permit to air dry whenever it's possible to attenuate heat damage.

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its fabulous inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet a fashionable and stylish accessory with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature, never close heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner hand wash using a towel then permit to air dry whenever it's possible to attenuate heat damage.

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its fabulous inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet a fashionable and stylish accessory with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature, never close heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner hand wash using a towel then permit to air dry whenever it's possible to attenuate heat damage.

The Vintage Helmet is a remake of the famous and iconic 70’s shell and is notable for being the smallest homologated helmet of its category helping you to avoid bobblehead syndrome. The shell is made of fibreglass and is very comfortable thanks to its fabulous inner lining. The focus of the company was to change the traditional helmet shape into a retro version in order to make the helmet a fashionable and stylish accessory with an original design. Each model has its own personality with cool custom paints.

TECHNICAL DETAILS:

• Fiberglass Shell
• Removable and washable liner
• Three different shells for perfect fit and maximum compactness
• Shell 1: XS - 54 cm; S - 55 cm
• Shell 2: M - 56/57 cm
• Shell 3: L - 58 cm; XL - 59/60 cm
• Integrated Snaps for Visors/Shields. Note: these are compatible with Biltwell Bubble Visors found here and with the DMD Ghost goggles.
• Padded chin strap with Double D-ring closure
• ECE Homologation

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature, never close heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner hand wash using a towel then permit to air dry whenever it's possible to attenuate heat damage.

The SeventyFive is a tribute to the stylish icon of the 70’S. The helmet is a play on the design of the Racer model and the name comes from the year when the company was born. The helmet has slotted air vents to increase ventilation and it has 3 snaps to allow for fitment of DMD's snap-on visor. It has a space large enough to accommodate most goggles. This model is also compatible with DMD's new SeventyFive Goggle  and with the DMD Ghost goggles.

TECHNICAL DETAILS

• Carbon kevlar shell
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature, never close heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner hand wash using a towel then permit to air dry whenever it's possible to attenuate heat damage.

The SeventyFive is a tribute to the stylish icon of the 70’S. The helmet is a play on the design of the Racer model and the name comes from the year when the company was born. The helmet has slotted air vents to increase ventilation and it has 3 snaps to allow for fitment of DMD's snap-on visor. It has a space large enough to accommodate most goggles. This model is also compatible with DMD's new SeventyFive Goggle  and with the DMD Ghost goggles.

TECHNICAL DETAILS

• Carbon kevlar shell
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature, never close heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner hand wash using a towel then permit to air dry whenever it's possible to attenuate heat damage.

The SeventyFive is a tribute to the stylish icon of the 70’S. The helmet is a play on the design of the Racer model and the name comes from the year when the company was born. The helmet has slotted air vents to increase ventilation and it has 3 snaps to allow for fitment of DMD's snap-on visor. It has a space large enough to accommodate most goggles. This model is also compatible with DMD's new SeventyFive Goggle  and with the DMD Ghost goggles.

TECHNICAL DETAILS

• Carbon kevlar shell
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature, never close heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner hand wash using a towel then permit to air dry whenever it's possible to attenuate heat damage.

The SeventyFive is a tribute to the stylish icon of the 70’S. The helmet is a play on the design of the Racer model and the name comes from the year when the company was born. The helmet has slotted air vents to increase ventilation and it has 3 snaps to allow for fitment of DMD's snap-on visor. It has a space large enough to accommodate most goggles. This model is also compatible with DMD's new SeventyFive Goggle  and with the DMD Ghost goggles.

TECHNICAL DETAILS

• Carbon kevlar shell
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature, never close heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner hand wash using a towel then permit to air dry whenever it's possible to attenuate heat damage.

The SeventyFive is a tribute to the stylish icon of the 70’S. The helmet is a play on the design of the Racer model and the name comes from the year when the company was born. The helmet has slotted air vents to increase ventilation and it has 3 snaps to allow for fitment of DMD's snap-on visor. It has a space large enough to accommodate most goggles. This model is also compatible with DMD's new SeventyFive Goggle  and with the DMD Ghost goggles.

TECHNICAL DETAILS

• Carbon kevlar shell
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature, never close heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner hand wash using a towel then permit to air dry whenever it's possible to attenuate heat damage.

The SeventyFive is a tribute to the stylish icon of the 70’S. The helmet is a play on the design of the Racer model and the name comes from the year when the company was born. The helmet has slotted air vents to increase ventilation and it has 3 snaps to allow for fitment of DMD's snap-on visor. It has a space large enough to accommodate most goggles. This model is also compatible with DMD's new SeventyFive Goggle  and with the DMD Ghost goggles.

TECHNICAL DETAILS

• Carbon kevlar shell
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature, never close heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner hand wash using a towel then permit to air dry whenever it's possible to attenuate heat damage.

The Rocket helmet improves upon the design of the first full-face helmet introduced to the market in 1970, incorporating all modern safety standards while being true to that retro 70's look. The helmet includes a clear flip-up visor. An optional smoke visor can be found here.

The Handmade Collection takes the Rocket line and kicks it up a few notches incorporating a carbon kevlar shell, that's painstakingly handpainted to create a functional work of art. It is the result of the best of Italian craftsmen’s skilled hands.

TECHNICAL DETAILS

• Carbon kevlar shell
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation
• Hand-painted graphic
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature, never close heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner hand wash using a towel then permit to air dry whenever it's possible to attenuate heat damage.

The Racer helmet is a new and improved design based on the first full-face Motocross helmet introduced in 1975. The full-coverage style with extra facial protection is built up around the nose so you have extra protection for your “winning smile”. It has a space large enough for the DMD Ghost goggles. The helmet is also compatible with the DMD Racer Visor found here.

TECHNICAL DETAILS

• Carbon kevlar shell
• Removable and washable liner
• Padded chin strap with Double D-ring closure
• ECE Homologation
• Two shell sizes
• Small shell: XS: 53/54 cm; S: 55/56 cm; M: 57/58 cm
• Standard shell: L: 59/60 cm; XL: 61/62 cm; XXL: 63 cm

PRODUCT CARE

• Helmets are made of materials that can be damaged by many commonly available cleaners.
• Clean the helmet using a soft cloth or sponge, warm water and mild soap.
• When drying, be careful the helmet doesn't get too hot as this can damage the interior EPS lining.
• Let dry at room temperature, never close heating appliances as too high temperature will damage the inner liner material and inner shell.
• Clean the removable liner hand wash using a towel then permit to air dry whenever it's possible to attenuate heat damage.

Technical Details

• Injection-molded ABS plastic outer shell is rugged yet lightweight
• Three-piece Expanded Polystyrene (EPS) safety shell dissipates impact loads and fortifies helmet structure without compromising comfort
• Molded urethane chin bar pad features front and side vents for cooling airflow
• CE-certified polycarbonate shield is anti-fog and anti-scratch for safety and durability
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Built in recesses for various aftermarket audio & comms systems

Technical Details

• Injection-molded ABS plastic outer shell is rugged yet lightweight
• Three-piece Expanded Polystyrene (EPS) safety shell dissipates impact loads and fortifies helmet structure without compromising comfort
• Molded urethane chin bar pad features front and side vents for cooling airflow
• CE-certified polycarbonate shield is anti-fog and anti-scratch for safety and durability
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Built in recesses for various aftermarket audio & comms systems

Technical Details

• Injection-molded ABS plastic outer shell is rugged yet lightweight
• Three-piece Expanded Polystyrene (EPS) safety shell dissipates impact loads and fortifies helmet structure without compromising comfort
• Molded urethane chin bar pad features front and side vents for cooling airflow
• CE-certified polycarbonate shield is anti-fog and anti-scratch for safety and durability
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Built in recesses for various aftermarket audio & comms systems

Technical Details

• Injection-molded ABS plastic outer shell is rugged yet lightweight
• Three-piece Expanded Polystyrene (EPS) safety shell dissipates impact loads and fortifies helmet structure without compromising comfort
• Molded urethane chin bar pad features front and side vents for cooling airflow
• CE-certified polycarbonate shield is anti-fog and anti-scratch for safety and durability
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Built in recesses for various aftermarket audio & comms systems

Progressively styled and rigorously tested, Biltwell's finest ECE-certified helmet is a top choice for high-performance riders. Comes standard with an injection molded anti-fog clear face shield.

Technical Details

• Injection-molded ABS plastic outer shell is rugged yet lightweight
• Three-piece Expanded Polystyrene (EPS) safety shell dissipates impact loads and fortifies helmet structure without compromising comfort
• Molded urethane chin bar pad features front and side vents for cooling airflow
• CE-certified polycarbonate shield is anti-fog and anti-scratch for safety and durability
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Built in recesses for various aftermarket audio & comms systems

 The new ECE-certified Gringo S boasts fit, finish and safety technology identical to its no-frills full-face sibling, but features a flip-up face shield for added safety and riding comfort.

Technical Details

Injection-molded ABS plastic outer shell is rugged yet lightweight
Three-piece Expanded Polystyrene (EPS) safety shell dissipates impact loads and enhances helmet structure for safety without compromising comfort
Molded urethane chin bar pad dissipates energy from frontal impacts
Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
CE-certified, injection-molded polycarbonate shield has anti-fog and anti-scratch treatments for safety and durability
Built in recesses for various aftermarket audio & comms systems

Helmet Fitment
With added EPS safety foam, these helmets offer a more secure fit on the lower portion / cheek area than our previous DOT only version. As with all of our other helmets, we offer cheek pads with various thicknesses to truly dial in your lid's fitment if the stock pads don't cut it. Contact a Biltwell rep for a no hassle exchange of your stock pads if you'd like a thinner or thicker set.

The Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE motorcycle standards—the European safety protocol recognized by independent labs as the toughest in the world. 

Technical Details

• Injection-molded ABS plastic outer shell is rugged yet lightweight
• Three-piece Expanded Polystyrene (EPS) safety shell dissipates impact loads and enhances helmet structure without compromising comfort
• Molded urethane chin bar pad dissipates energy from frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Built in recesses for various aftermarket audio & comms systems

The Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE motorcycle standards—the European safety protocol recognized by independent labs as the toughest in the world. 

Technical Details

• Injection-molded ABS plastic outer shell is rugged yet lightweight
• Three-piece Expanded Polystyrene (EPS) safety shell dissipates impact loads and enhances helmet structure without compromising comfort
• Molded urethane chin bar pad dissipates energy from frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Built in recesses for various aftermarket audio & comms systems

TRACK TESTED

Introduced back in 1967, the first full-face helmet on the market, the Bell Star has long represented THE standard in head protection, and it has inspired an industry to pursue the science of head protection. The Star is the continuing evolution of that original ethos, and more. Drawing our inspiration from the essential needs of the modern racer, and loaded with quality features TriMatrix composite shell, MIPS energy management, XStatic liner and Panovision Class 1 optics - it's a complete rethinking of what a race helmet should be. Includes Bell ProTint Photochromic Shield.

SPECS
SHELL -TRIMATRIX COMPOSITE SHELL CONSTRUCTION
LINER-X-STATIC XT2 SILVER LINER
CHEEK PADS-MAGNEFUSION MAGNETIC CHEEK PADS
SHIELD-BELL PRO TINT PHOTOCHROMIC SHIELD TECHNOLOGY
ORIENTATION-RACEVIEW ORIENTATION
CERTIFICATION-DOT-SNELL M2015

NOT RETRO. ORIGINAL.

The iconic legend has returned! When the original Moto-3 was created back in the late 70s it was a product ahead of its time. Quickly becoming the industry standard in performance and style, today's Moto-3 is everything it was style-wise, with the added benefits of modern saftey and production advancements. From the fiberglass composite shell to the EPS-lined chin bar, we left no detail unpolished. The solid colors use the original style terrycloth liner, which is removable and washable.

SPECS
SHELL- LIGHTWEIGHT FIBERGLASS COMPOSITE SHELL CONSTRUCTION
LINER-REMOVABLE/WASHABLE ANTI-MICROBIAL TERRYCLOTH LINER
CERTIFICATION- DOT

The Eliminator’s DNA threads a storied history of burned rubber, dragstrip lights, checkered flags and white knuckles together into a purpose-built street brawler.

DETAILS
BORN FROM AUTO, BUILT FOR THE STREET

The new Eliminator delivers bold, assertive street performance. Sixty years of evolution is rolled into a stripped-down, no-BS helmet that combines lightweight, perfect fit and a legendary reputation for protection. The auto-inspired design features a fiberglass composite shell and can be worn with a no-fog face shield or visor. Scorch the dragstrip. Carve the canyons. Own the streets.

SPECS.

SHELL: FIBERGLASS COMPOSITE SHELL CONSTRUCTION
LINER: ANTI-BACTERIAL LINER
CHEEK PADS: CONTOURED CHEEK PADS FOR SUPERIOR FIT AND COMFORT
SHIELD: PROVISION ANTI-FOG SHIELD WITH CLASS 1 OPTICS
CERTIFICATION: DOT

The Eliminator’s DNA threads a storied history of burned rubber, dragstrip lights, checkered flags and white knuckles together into a purpose-built street brawler.

DETAILS

BORN FROM AUTO, BUILT FOR THE STREET

The new Eliminator delivers bold, assertive street performance. Sixty years of evolution is rolled into a stripped-down, no-BS helmet that combines lightweight, perfect fit and a legendary reputation for protection. The auto-inspired design features a fiberglass composite shell and can be worn with a no-fog face shield or visor. Scorch the dragstrip. Carve the canyons. Own the streets.

SPECS:

SHELL: FIBERGLASS COMPOSITE SHELL CONSTRUCTION
LINER: ANTI-BACTERIAL LINER
CHEEK PADS: CONTOURED CHEEK PADS FOR SUPERIOR FIT AND COMFORT
SHIELD: PROVISION ANTI-FOG SHIELD WITH CLASS 1 OPTICS
CERTIFICATION: DOT

MODERN CLASSIC

The Bullitt is an iconic product, a helmet rooted in a storied past mixed with a style and design that could best be described as "retro-future." Inspired by the legendary Bell Star helmets of the '60s and '70s but speaking a modern design language, the Bullitt became an instant classic the moment it hit the streets. We use only the highest-quality ingredients, right down to the last stitch of its genuine leather interior, to create this functional work of art. Available in fiberglass composite and featuring many shield options to further customize this one-of-a-kind helmet. No matter what, how, or where you ride, the Bullitt is in a class by itself. Includes Clear faceshield.

SPECS
SHELL - LOW-PROFILE CARBON COMPOSITE SHELL CONSTRUCTION
LINER - GENUINE LEATHER, REMOVABLE/WASHABLE, ANTI-MICROBIAL INTERIOR
CHEEK PADS -CONTOURED CHEEK PADS FOR SUPERIOR FIT AND COMFORT
SHIELD - CLEAR SHIELD INSTALLED. ACCESSORY SHIELDS AVAILABLE FOR A PERSONALIZED LOOK.
VENTILATION -FRONT CHIN VENTS WITH METAL MESH INTAKE AND EXHAUST VENTS
CERTIFICATION-DOT

MODERN CLASSIC

The Bullitt is an iconic product, a helmet rooted in a storied past mixed with a style and design that could best be described as "retro-future." Inspired by the legendary Bell Star helmets of the '60s and '70s but speaking a modern design language, the Bullitt became an instant classic the moment it hit the streets. We use only the highest-quality ingredients, right down to the last stitch of its genuine leather interior, to create this functional work of art. Available in fiberglass composite and featuring many shield options to further customize this one-of-a-kind helmet. No matter what, how, or where you ride, the Bullitt is in a class by itself. Includes Clear faceshield.

SPECS
SHELL - LOW-PROFILE CARBON COMPOSITE SHELL CONSTRUCTION
LINER - GENUINE LEATHER, REMOVABLE/WASHABLE, ANTI-MICROBIAL INTERIOR
CHEEK PADS -CONTOURED CHEEK PADS FOR SUPERIOR FIT AND COMFORT
SHIELD - CLEAR SHIELD INSTALLED. ACCESSORY SHIELDS AVAILABLE FOR A PERSONALIZED LOOK.
VENTILATION -FRONT CHIN VENTS WITH METAL MESH INTAKE AND EXHAUST VENTS
CERTIFICATION-DOT

MODERN CLASSIC

The Bullitt is an iconic product, a helmet rooted in a storied past mixed with a style and design that could best be described as "retro-future." Inspired by the legendary Bell Star helmets of the '60s and '70s but speaking a modern design language, the Bullitt became an instant classic the moment it hit the streets. We use only the highest-quality ingredients, right down to the last stitch of its genuine leather interior, to create this functional work of art. Available in fiberglass composite and featuring many shield options to further customize this one-of-a-kind helmet. No matter what, how, or where you ride, the Bullitt is in a class by itself. Includes Clear faceshield.

SPECS
SHELL - LOW-PROFILE CARBON COMPOSITE SHELL CONSTRUCTION
LINER - GENUINE LEATHER, REMOVABLE/WASHABLE, ANTI-MICROBIAL INTERIOR
CHEEK PADS -CONTOURED CHEEK PADS FOR SUPERIOR FIT AND COMFORT
SHIELD - CLEAR SHIELD INSTALLED. ACCESSORY SHIELDS AVAILABLE FOR A PERSONALIZED LOOK.
VENTILATION -FRONT CHIN VENTS WITH METAL MESH INTAKE AND EXHAUST VENTS
CERTIFICATION-DOT